| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at https://curl.haxx.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| ########################################################################### |
| |
| #use strict; |
| |
| my @xml; |
| my $xmlfile; |
| |
| my $warning=0; |
| my $trace=0; |
| |
| sub decode_base64 { |
| tr:A-Za-z0-9+/::cd; # remove non-base64 chars |
| tr:A-Za-z0-9+/: -_:; # convert to uuencoded format |
| my $len = pack("c", 32 + 0.75*length); # compute length byte |
| return unpack("u", $len . $_); # uudecode and print |
| } |
| |
| sub decode_hex { |
| my $s = $_; |
| # remove everything not hex |
| $s =~ s/[^A-Fa-f0-9]//g; |
| # encode everything |
| $s =~ s/([a-fA-F0-9][a-fA-F0-9])/chr(hex($1))/eg; |
| return $s; |
| } |
| |
| sub getpartattr { |
| # if $part is undefined (ie only one argument) then |
| # return the attributes of the section |
| |
| my ($section, $part)=@_; |
| |
| my %hash; |
| my $inside=0; |
| |
| # print "Section: $section, part: $part\n"; |
| |
| for(@xml) { |
| # print "$inside: $_"; |
| if(!$inside && ($_ =~ /^ *\<$section/)) { |
| $inside++; |
| } |
| if((1 ==$inside) && ( ($_ =~ /^ *\<$part([^>]*)/) || |
| !(defined($part)) ) |
| ) { |
| $inside++; |
| my $attr=$1; |
| |
| while($attr =~ s/ *([^=]*)= *(\"([^\"]*)\"|([^\> ]*))//) { |
| my ($var, $cont)=($1, $2); |
| $cont =~ s/^\"(.*)\"$/$1/; |
| $hash{$var}=$cont; |
| } |
| last; |
| } |
| # detect end of section when part wasn't found |
| elsif((1 ==$inside) && ($_ =~ /^ *\<\/$section\>/)) { |
| last; |
| } |
| elsif((2 ==$inside) && ($_ =~ /^ *\<\/$part/)) { |
| $inside--; |
| } |
| } |
| return %hash; |
| } |
| |
| sub getpart { |
| my ($section, $part)=@_; |
| |
| my @this; |
| my $inside=0; |
| my $base64=0; |
| my $hex=0; |
| my $line; |
| |
| for(@xml) { |
| $line++; |
| if(!$inside && ($_ =~ /^ *\<$section/)) { |
| $inside++; |
| } |
| elsif(($inside >= 1) && ($_ =~ /^ *\<$part[ \>]/)) { |
| if($inside > 1) { |
| push @this, $_; |
| } |
| elsif($_ =~ /$part [^>]*base64=/) { |
| # attempt to detect our base64 encoded part |
| $base64=1; |
| } |
| elsif($_ =~ /$part [^>]*hex=/) { |
| # attempt to detect a hex-encoded part |
| $hex=1; |
| } |
| $inside++; |
| } |
| elsif(($inside >= 2) && ($_ =~ /^ *\<\/$part[ \>]/)) { |
| if($inside > 2) { |
| push @this, $_; |
| } |
| $inside--; |
| } |
| elsif(($inside >= 1) && ($_ =~ /^ *\<\/$section/)) { |
| if($inside > 1) { |
| print STDERR "$xmlfile:$line:1: error: missing </$part> tag before </$section>\n"; |
| @this = ("format error in $xmlfile"); |
| } |
| if($trace && @this) { |
| print STDERR "*** getpart.pm: $section/$part returned data!\n"; |
| } |
| if($warning && !@this) { |
| print STDERR "*** getpart.pm: $section/$part returned empty!\n"; |
| } |
| if($base64) { |
| # decode the whole array before returning it! |
| for(@this) { |
| my $decoded = decode_base64($_); |
| $_ = $decoded; |
| } |
| } |
| elsif($hex) { |
| # decode the whole array before returning it! |
| for(@this) { |
| my $decoded = decode_hex($_); |
| $_ = $decoded; |
| } |
| } |
| return @this; |
| } |
| elsif($inside >= 2) { |
| push @this, $_; |
| } |
| } |
| if($trace && @this) { |
| # section/part has data but end of section not detected, |
| # end of file implies end of section. |
| print STDERR "*** getpart.pm: $section/$part returned data!\n"; |
| } |
| if($warning && !@this) { |
| # section/part does not exist or has no data without an end of |
| # section; end of file implies end of section. |
| print STDERR "*** getpart.pm: $section/$part returned empty!\n"; |
| } |
| return @this; |
| } |
| |
| sub partexists { |
| my ($section, $part)=@_; |
| |
| my $inside = 0; |
| |
| for(@xml) { |
| if(!$inside && ($_ =~ /^ *\<$section/)) { |
| $inside++; |
| } |
| elsif((1 == $inside) && ($_ =~ /^ *\<$part[ \>]/)) { |
| return 1; # exists |
| } |
| elsif((1 == $inside) && ($_ =~ /^ *\<\/$section/)) { |
| return 0; # does not exist |
| } |
| } |
| return 0; # does not exist |
| } |
| |
| # Return entire document as list of lines |
| sub getall { |
| return @xml; |
| } |
| |
| sub loadtest { |
| my ($file)=@_; |
| |
| undef @xml; |
| $xmlfile = $file; |
| |
| if(open(XML, "<$file")) { |
| binmode XML; # for crapage systems, use binary |
| while(<XML>) { |
| push @xml, $_; |
| } |
| close(XML); |
| } |
| else { |
| # failure |
| if($warning) { |
| print STDERR "file $file wouldn't open!\n"; |
| } |
| return 1; |
| } |
| return 0; |
| } |
| |
| # |
| # Strip off all lines that match the specified pattern and return |
| # the new array. |
| # |
| |
| sub striparray { |
| my ($pattern, $arrayref) = @_; |
| |
| my @array; |
| |
| for(@$arrayref) { |
| if($_ !~ /$pattern/) { |
| push @array, $_; |
| } |
| } |
| return @array; |
| } |
| |
| # |
| # pass array *REFERENCES* ! |
| # |
| sub compareparts { |
| my ($firstref, $secondref)=@_; |
| |
| my $first = join("", @$firstref); |
| my $second = join("", @$secondref); |
| |
| # we cannot compare arrays index per index since with the base64 chunks, |
| # they may not be "evenly" distributed |
| |
| # NOTE: this no longer strips off carriage returns from the arrays. Is that |
| # really necessary? It ruins the testing of newlines. I believe it was once |
| # added to enable tests on win32. |
| |
| if($first ne $second) { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| # |
| # Write a given array to the specified file |
| # |
| sub writearray { |
| my ($filename, $arrayref)=@_; |
| |
| open(TEMP, ">$filename"); |
| binmode(TEMP,":raw"); # cygwin fix by Kevin Roth |
| for(@$arrayref) { |
| print TEMP $_; |
| } |
| close(TEMP); |
| } |
| |
| # |
| # Load a specified file and return it as an array |
| # |
| sub loadarray { |
| my ($filename)=@_; |
| my @array; |
| |
| open(TEMP, "<$filename"); |
| while(<TEMP>) { |
| push @array, $_; |
| } |
| close(TEMP); |
| return @array; |
| } |
| |
| # Given two array references, this function will store them in two temporary |
| # files, run 'diff' on them, store the result and return the diff output! |
| |
| sub showdiff { |
| my ($logdir, $firstref, $secondref)=@_; |
| |
| my $file1="$logdir/check-generated"; |
| my $file2="$logdir/check-expected"; |
| |
| open(TEMP, ">$file1"); |
| for(@$firstref) { |
| my $l = $_; |
| $l =~ s/\r/[CR]/g; |
| $l =~ s/\n/[LF]/g; |
| print TEMP $l; |
| print TEMP "\n"; |
| } |
| close(TEMP); |
| |
| open(TEMP, ">$file2"); |
| for(@$secondref) { |
| my $l = $_; |
| $l =~ s/\r/[CR]/g; |
| $l =~ s/\n/[LF]/g; |
| print TEMP $l; |
| print TEMP "\n"; |
| } |
| close(TEMP); |
| my @out = `diff -u $file2 $file1 2>/dev/null`; |
| |
| if(!$out[0]) { |
| @out = `diff -c $file2 $file1 2>/dev/null`; |
| } |
| |
| return @out; |
| } |
| |
| |
| 1; |
