| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at https://curl.haxx.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ***************************************************************************/ |
| |
| /* !checksrc! disable ASSIGNWITHINCONDITION 14 */ |
| |
| /* Now include the curl_setup.h file from libcurl's private libdir (the source |
| version, but that might include "curl_config.h" from the build dir so we |
| need both of them in the include path), so that we get good in-depth |
| knowledge about the system we're building this on */ |
| |
| #define CURL_NO_OLDIES |
| |
| #include "curl_setup.h" |
| |
| #include <curl/curl.h> |
| |
| #ifdef HAVE_SYS_SELECT_H |
| /* since so many tests use select(), we can just as well include it here */ |
| #include <sys/select.h> |
| #elif defined(HAVE_UNISTD_H) |
| #include <unistd.h> |
| #endif |
| |
| #ifdef TPF |
| # include "select.h" |
| #endif |
| |
| #include "curl_printf.h" |
| |
| #define test_setopt(A,B,C) \ |
| if((res = curl_easy_setopt((A), (B), (C))) != CURLE_OK) \ |
| goto test_cleanup |
| |
| #define test_multi_setopt(A,B,C) \ |
| if((res = curl_multi_setopt((A), (B), (C))) != CURLE_OK) \ |
| goto test_cleanup |
| |
| extern char *libtest_arg2; /* set by first.c to the argv[2] or NULL */ |
| extern char *libtest_arg3; /* set by first.c to the argv[3] or NULL */ |
| |
| /* argc and argv as passed in to the main() function */ |
| extern int test_argc; |
| extern char **test_argv; |
| |
| extern struct timeval tv_test_start; /* for test timing */ |
| |
| extern int select_wrapper(int nfds, fd_set *rd, fd_set *wr, fd_set *exc, |
| struct timeval *tv); |
| |
| extern void wait_ms(int ms); /* wait this many milliseconds */ |
| |
| extern int test(char *URL); /* the actual test function provided by each |
| individual libXXX.c file */ |
| |
| extern char *hexdump(const unsigned char *buffer, size_t len); |
| |
| #ifdef UNITTESTS |
| extern int unitfail; |
| #endif |
| |
| /* |
| ** TEST_ERR_* values must be greater than CURL_LAST CURLcode in order |
| ** to avoid confusion with any CURLcode or CURLMcode. These TEST_ERR_* |
| ** codes are returned to signal test specific situations and should |
| ** not get mixed with CURLcode or CURLMcode values. |
| ** |
| ** For portability reasons TEST_ERR_* values should be less than 127. |
| */ |
| |
| #define TEST_ERR_MAJOR_BAD 126 |
| #define TEST_ERR_RUNS_FOREVER 125 |
| #define TEST_ERR_EASY_INIT 124 |
| #define TEST_ERR_MULTI_INIT 123 |
| #define TEST_ERR_NUM_HANDLES 122 |
| #define TEST_ERR_SELECT 121 |
| #define TEST_ERR_SUCCESS 120 |
| #define TEST_ERR_FAILURE 119 |
| #define TEST_ERR_USAGE 118 |
| #define TEST_ERR_FOPEN 117 |
| #define TEST_ERR_FSTAT 116 |
| #define TEST_ERR_BAD_TIMEOUT 115 |
| |
| /* |
| ** Macros for test source code readability/maintainability. |
| ** |
| ** All of the following macros require that an int data type 'res' variable |
| ** exists in scope where macro is used, and that it has been initialized to |
| ** zero before the macro is used. |
| ** |
| ** exe_* and chk_* macros are helper macros not intended to be used from |
| ** outside of this header file. Arguments 'Y' and 'Z' of these represent |
| ** source code file and line number, while Arguments 'A', 'B', etc, are |
| ** the arguments used to actually call a libcurl function. |
| ** |
| ** All easy_* and multi_* macros call a libcurl function and evaluate if |
| ** the function has succeeded or failed. When the function succeeds 'res' |
| ** variable is not set nor cleared and program continues normal flow. On |
| ** the other hand if function fails 'res' variable is set and a jump to |
| ** label 'test_cleanup' is performed. |
| ** |
| ** Every easy_* and multi_* macros have a res_easy_* and res_multi_* macro |
| ** counterpart that operates in the same way with the exception that no |
| ** jump takes place in case of failure. res_easy_* and res_multi_* macros |
| ** should be immediately followed by checking if 'res' variable has been |
| ** set. |
| ** |
| ** 'res' variable when set will hold a CURLcode, CURLMcode, or any of the |
| ** TEST_ERR_* values defined above. It is advisable to return this value |
| ** as test result. |
| */ |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_easy_init(A,Y,Z) do { \ |
| if(((A) = curl_easy_init()) == NULL) { \ |
| fprintf(stderr, "%s:%d curl_easy_init() failed\n", (Y), (Z)); \ |
| res = TEST_ERR_EASY_INIT; \ |
| } \ |
| } while(0) |
| |
| #define res_easy_init(A) \ |
| exe_easy_init((A), (__FILE__), (__LINE__)) |
| |
| #define chk_easy_init(A,Y,Z) do { \ |
| exe_easy_init((A), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define easy_init(A) \ |
| chk_easy_init((A), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_init(A,Y,Z) do { \ |
| if(((A) = curl_multi_init()) == NULL) { \ |
| fprintf(stderr, "%s:%d curl_multi_init() failed\n", (Y), (Z)); \ |
| res = TEST_ERR_MULTI_INIT; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_init(A) \ |
| exe_multi_init((A), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_init(A,Y,Z) do { \ |
| exe_multi_init((A), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_init(A) \ |
| chk_multi_init((A), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_easy_setopt(A,B,C,Y,Z) do { \ |
| CURLcode ec; \ |
| if((ec = curl_easy_setopt((A), (B), (C))) != CURLE_OK) { \ |
| fprintf(stderr, "%s:%d curl_easy_setopt() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_easy_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| } while(0) |
| |
| #define res_easy_setopt(A, B, C) \ |
| exe_easy_setopt((A), (B), (C), (__FILE__), (__LINE__)) |
| |
| #define chk_easy_setopt(A, B, C, Y, Z) do { \ |
| exe_easy_setopt((A), (B), (C), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define easy_setopt(A, B, C) \ |
| chk_easy_setopt((A), (B), (C), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_setopt(A, B, C, Y, Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_setopt((A), (B), (C))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_setopt() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_setopt(A,B,C) \ |
| exe_multi_setopt((A), (B), (C), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_setopt(A,B,C,Y,Z) do { \ |
| exe_multi_setopt((A), (B), (C), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_setopt(A,B,C) \ |
| chk_multi_setopt((A), (B), (C), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_add_handle(A,B,Y,Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_add_handle((A), (B))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_add_handle() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_add_handle(A, B) \ |
| exe_multi_add_handle((A), (B), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_add_handle(A, B, Y, Z) do { \ |
| exe_multi_add_handle((A), (B), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_add_handle(A, B) \ |
| chk_multi_add_handle((A), (B), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_remove_handle(A,B,Y,Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_remove_handle((A), (B))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_remove_handle() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_remove_handle(A, B) \ |
| exe_multi_remove_handle((A), (B), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_remove_handle(A, B, Y, Z) do { \ |
| exe_multi_remove_handle((A), (B), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| |
| #define multi_remove_handle(A, B) \ |
| chk_multi_remove_handle((A), (B), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_perform(A,B,Y,Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_perform((A), (B))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_perform() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| else if(*((B)) < 0) { \ |
| fprintf(stderr, "%s:%d curl_multi_perform() succeeded, " \ |
| "but returned invalid running_handles value (%d)\n", \ |
| (Y), (Z), (int)*((B))); \ |
| res = TEST_ERR_NUM_HANDLES; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_perform(A, B) \ |
| exe_multi_perform((A), (B), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_perform(A, B, Y, Z) do { \ |
| exe_multi_perform((A), (B), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_perform(A,B) \ |
| chk_multi_perform((A), (B), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_fdset(A, B, C, D, E, Y, Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_fdset((A), (B), (C), (D), (E))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_fdset() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| else if(*((E)) < -1) { \ |
| fprintf(stderr, "%s:%d curl_multi_fdset() succeeded, " \ |
| "but returned invalid max_fd value (%d)\n", \ |
| (Y), (Z), (int)*((E))); \ |
| res = TEST_ERR_NUM_HANDLES; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_fdset(A, B, C, D, E) \ |
| exe_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_fdset(A, B, C, D, E, Y, Z) do { \ |
| exe_multi_fdset((A), (B), (C), (D), (E), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_fdset(A, B, C, D, E) \ |
| chk_multi_fdset((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_timeout(A,B,Y,Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_timeout((A), (B))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_timeout() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| else if(*((B)) < -1L) { \ |
| fprintf(stderr, "%s:%d curl_multi_timeout() succeeded, " \ |
| "but returned invalid timeout value (%ld)\n", \ |
| (Y), (Z), (long)*((B))); \ |
| res = TEST_ERR_BAD_TIMEOUT; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_timeout(A, B) \ |
| exe_multi_timeout((A), (B), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_timeout(A, B, Y, Z) do { \ |
| exe_multi_timeout((A), (B), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_timeout(A, B) \ |
| chk_multi_timeout((A), (B), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_poll(A,B,C,D,E,Y,Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_poll((A), (B), (C), (D), (E))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_poll() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| else if(*((E)) < 0) { \ |
| fprintf(stderr, "%s:%d curl_multi_poll() succeeded, " \ |
| "but returned invalid numfds value (%d)\n", \ |
| (Y), (Z), (int)*((E))); \ |
| res = TEST_ERR_NUM_HANDLES; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_poll(A, B, C, D, E) \ |
| exe_multi_poll((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_poll(A, B, C, D, E, Y, Z) do { \ |
| exe_multi_poll((A), (B), (C), (D), (E), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_poll(A, B, C, D, E) \ |
| chk_multi_poll((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_multi_wakeup(A,Y,Z) do { \ |
| CURLMcode ec; \ |
| if((ec = curl_multi_wakeup((A))) != CURLM_OK) { \ |
| fprintf(stderr, "%s:%d curl_multi_wakeup() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_multi_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| } while(0) |
| |
| #define res_multi_wakeup(A) \ |
| exe_multi_wakeup((A), (__FILE__), (__LINE__)) |
| |
| #define chk_multi_wakeup(A, Y, Z) do { \ |
| exe_multi_wakeup((A), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define multi_wakeup(A) \ |
| chk_multi_wakeup((A), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_select_test(A, B, C, D, E, Y, Z) do { \ |
| int ec; \ |
| if(select_wrapper((A), (B), (C), (D), (E)) == -1) { \ |
| ec = SOCKERRNO; \ |
| fprintf(stderr, "%s:%d select() failed, with " \ |
| "errno %d (%s)\n", \ |
| (Y), (Z), ec, strerror(ec)); \ |
| res = TEST_ERR_SELECT; \ |
| } \ |
| } while(0) |
| |
| #define res_select_test(A, B, C, D, E) \ |
| exe_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) |
| |
| #define chk_select_test(A, B, C, D, E, Y, Z) do { \ |
| exe_select_test((A), (B), (C), (D), (E), (Y), (Z)); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define select_test(A, B, C, D, E) \ |
| chk_select_test((A), (B), (C), (D), (E), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define start_test_timing() do { \ |
| tv_test_start = tutil_tvnow(); \ |
| } while(0) |
| |
| #define exe_test_timedout(Y,Z) do { \ |
| if(tutil_tvdiff(tutil_tvnow(), tv_test_start) > TEST_HANG_TIMEOUT) { \ |
| fprintf(stderr, "%s:%d ABORTING TEST, since it seems " \ |
| "that it would have run forever.\n", (Y), (Z)); \ |
| res = TEST_ERR_RUNS_FOREVER; \ |
| } \ |
| } while(0) |
| |
| #define res_test_timedout() \ |
| exe_test_timedout((__FILE__), (__LINE__)) |
| |
| #define chk_test_timedout(Y, Z) do { \ |
| exe_test_timedout(Y, Z); \ |
| if(res) \ |
| goto test_cleanup; \ |
| } while(0) |
| |
| #define abort_on_test_timeout() \ |
| chk_test_timedout((__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
| |
| #define exe_global_init(A,Y,Z) do { \ |
| CURLcode ec; \ |
| if((ec = curl_global_init((A))) != CURLE_OK) { \ |
| fprintf(stderr, "%s:%d curl_global_init() failed, " \ |
| "with code %d (%s)\n", \ |
| (Y), (Z), (int)ec, curl_easy_strerror(ec)); \ |
| res = (int)ec; \ |
| } \ |
| } while(0) |
| |
| #define res_global_init(A) \ |
| exe_global_init((A), (__FILE__), (__LINE__)) |
| |
| #define chk_global_init(A, Y, Z) do { \ |
| exe_global_init((A), (Y), (Z)); \ |
| if(res) \ |
| return res; \ |
| } while(0) |
| |
| /* global_init() is different than other macros. In case of |
| failure it 'return's instead of going to 'test_cleanup'. */ |
| |
| #define global_init(A) \ |
| chk_global_init((A), (__FILE__), (__LINE__)) |
| |
| /* ---------------------------------------------------------------- */ |
