/*****************************************************************************
 *                                  _   _ ____  _     
 *  Project                     ___| | | |  _ \| |    
 *                             / __| | | | |_) | |    
 *                            | (__| |_| |  _ <| |___ 
 *                             \___|\___/|_| \_\_____|
 *
 *  The contents of this file are subject to the Mozilla Public License
 *  Version 1.0 (the "License"); you may not use this file except in
 *  compliance with the License. You may obtain a copy of the License at
 *  http://www.mozilla.org/MPL/
 *
 *  Software distributed under the License is distributed on an "AS IS"
 *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
 *  License for the specific language governing rights and limitations
 *  under the License.
 *
 *  The Original Code is Curl.
 *
 *  The Initial Developer of the Original Code is Daniel Stenberg.
 *
 *  Portions created by the Initial Developer are Copyright (C) 1998.
 *  All Rights Reserved.
 *
 * ------------------------------------------------------------
 * Main author:
 * - Daniel Stenberg <Daniel.Stenberg@haxx.nu>
 *
 * 	http://curl.haxx.nu
 *
 * $Source$
 * $Revision$
 * $Date$
 * $Author$
 * $State$
 * $Locker$
 *
 * ------------------------------------------------------------
 ****************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdarg.h>
#include <sys/stat.h>
#include <ctype.h>

#include <curl/curl.h>
#include <curl/types.h> /* new for v7 */
#include <curl/easy.h> /* new for v7 */
#include <curl/mprintf.h>
#include "../lib/getdate.h"

#include "urlglob.h"
#define CURLseparator	"--_curl_--"
#define MIMEseparator	"_curl_"

/* This define make use of the "Curlseparator" as opposed to the
   MIMEseparator. We might add support for the latter one in the
   future, and that's why this is left in the source. */
#define CURL_SEPARATORS

/* This is now designed to have its own local setup.h */
#include "setup.h"

#ifdef WIN32
#include <winsock.h>
#endif

#include "version.h"

#ifdef HAVE_IO_H /* typical win32 habit */
#include <io.h>
#endif

#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif

/* Just a set of bits */
#define CONF_DEFAULT  0
#define CONF_VERBOSE  (1<<5) /* talk a lot */
#define CONF_HEADER   (1<<8) /* throw the header out too */
#define CONF_NOPROGRESS (1<<10) /* shut off the progress meter */
#define CONF_NOBODY   (1<<11) /* use HEAD to get http document */
#define CONF_FAILONERROR (1<<12) /* no output on http error codes >= 300 */
#define CONF_UPLOAD   (1<<14) /* this is an upload */
#define CONF_POST     (1<<15) /* HTTP POST method */
#define CONF_FTPLISTONLY (1<<16) /* Use NLST when listing ftp dir */
#define CONF_FTPAPPEND (1<<20) /* Append instead of overwrite on upload! */
#define CONF_NETRC    (1<<22)  /* read user+password from .netrc */
#define CONF_FOLLOWLOCATION (1<<23) /* use Location: Luke! */
#define CONF_FTPASCII (1<<24) /* use TYPE A for transfer */
#define CONF_HTTPPOST (1<<25) /* multipart/form-data HTTP POST */
#define CONF_PUT      (1<<27) /* PUT the input file */
#define CONF_MUTE     (1<<28) /* force NOPROGRESS */


#ifndef HAVE_STRDUP
/* Ultrix doesn't have strdup(), so make a quick clone: */
char *strdup(char *str)
{
  int len;
  char *newstr;

  len = strlen(str);
  newstr = (char *) malloc((len+1)*sizeof(char));
  if (!newstr)
    return (char *)NULL;

  strcpy(newstr,str);

  return newstr;

}
#endif 

extern void hugehelp(void);

/***********************************************************************
 * Start with some silly functions to make win32-systems survive
 ***********************************************************************/
#if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__)
static void win32_cleanup(void)
{
  WSACleanup();
}

static CURLcode win32_init(void)
{
  WORD wVersionRequested;  
  WSADATA wsaData; 
  int err; 
  wVersionRequested = MAKEWORD(1, 1); 
    
  err = WSAStartup(wVersionRequested, &wsaData); 
    
  if (err != 0) 
    /* Tell the user that we couldn't find a useable */ 
    /* winsock.dll.     */ 
    return CURLE_FAILED_INIT; 
    
  /* Confirm that the Windows Sockets DLL supports 1.1.*/ 
  /* Note that if the DLL supports versions greater */ 
  /* than 1.1 in addition to 1.1, it will still return */ 
  /* 1.1 in wVersion since that is the version we */ 
  /* requested. */ 
    
  if ( LOBYTE( wsaData.wVersion ) != 1 || 
       HIBYTE( wsaData.wVersion ) != 1 ) { 
    /* Tell the user that we couldn't find a useable */ 

    /* winsock.dll. */ 
    WSACleanup(); 
    return CURLE_FAILED_INIT; 
  }
  return CURLE_OK;
}
/* The Windows Sockets DLL is acceptable. Proceed. */ 
#else
static CURLcode win32_init(void) { return CURLE_OK; }
#define win32_cleanup()
#endif


/*
 * This is the main global constructor for the app. Call this before
 * _any_ libcurl usage. If this fails, *NO* libcurl functions may be
 * used, or havoc may be the result.
 */
CURLcode main_init(void)
{
  return win32_init();
}

/*
 * This is the main global destructor for the app. Call this after
 * _all_ libcurl usage is done.
 */
void main_free(void)
{
  win32_cleanup();
}


static void helpf(char *fmt, ...)
{
  va_list ap;
  if(fmt) {
    va_start(ap, fmt);
    fputs("curl: ", stderr); /* prefix it */
    vfprintf(stderr, fmt, ap);
    va_end(ap);
  }
  fprintf(stderr, "curl: try 'curl --help' for more information\n");
}

static void help(void)
{
  printf(CURL_ID "%s\n"
       "Usage: curl [options...] <url>\n"
       "Options: (H) means HTTP/HTTPS only, (F) means FTP only\n"
       " -a/--append        Append to target file when uploading (F)\n"
       " -A/--user-agent <string> User-Agent to send to server (H)\n"
       " -b/--cookie <name=string/file> Cookie string or file to read cookies from (H)\n"
       " -B/--ftp-ascii     Use ASCII transfer (F)\n"
       " -c/--continue      Resume a previous transfer where we left it\n"
       " -C/--continue-at <offset> Specify absolute resume offset\n"
       " -d/--data          POST data (H)\n"
       " -D/--dump-header <file> Write the headers to this file\n"
       " -e/--referer       Referer page (H)\n"
       " -E/--cert <cert:passwd> Specifies your certificate file and password (HTTPS)\n"
       " -f/--fail          Fail silently (no output at all) on errors (H)\n"
       " -F/--form <name=content> Specify HTTP POST data (H)\n"

       " -h/--help          This help text\n"
       " -H/--header <line> Custom header to pass to server. (H)\n"
       " -i/--include       Include the HTTP-header in the output (H)\n"
       " -I/--head          Fetch document info only (HTTP HEAD/FTP SIZE)\n"
       " -K/--config        Specify which config file to read\n"
       " -l/--list-only     List only names of an FTP directory (F)\n"
       " -L/--location      Follow Location: hints (H)\n"
       " -m/--max-time <seconds> Maximum time allowed for the transfer\n"
       " -M/--manual        Display huge help text\n"
       " -n/--netrc         Read .netrc for user name and password\n"
       " -N/--no-buffer     Disables the buffering of the output stream\n"
       " -o/--output <file> Write output to <file> instead of stdout\n"
       " -O/--remote-name   Write output to a file named as the remote file\n"
#if 0
       " -p/--port <port>   Use port other than default for current protocol.\n"
#endif
       " -P/--ftpport <address> Use PORT with address instead of PASV when ftping (F)\n"
       " -q                 When used as the first parameter disables .curlrc\n"
       " -Q/--quote <cmd>   Send QUOTE command to FTP before file transfer (F)\n"
       " -r/--range <range> Retrieve a byte range from a HTTP/1.1 or FTP server\n"
       " -s/--silent        Silent mode. Don't output anything\n"
       " -S/--show-error    Show error. With -s, make curl show errors when they occur\n"
       " -t/--upload        Transfer/upload stdin to remote site\n"
       " -T/--upload-file <file> Transfer/upload <file> to remote site\n"
       " -u/--user <user:password> Specify user and password to use\n"
       " -U/--proxy-user <user:password> Specify Proxy authentication\n"
       " -v/--verbose       Makes the operation more talkative\n"
       " -V/--version       Outputs version number then quits\n"
       " -w/--write-out [format] What to output after completion\n"
       " -x/--proxy <host>  Use proxy. (Default port is 1080)\n"
       " -X/--request <command> Specific request command to use\n"
       " -y/--speed-time    Time needed to trig speed-limit abort. Defaults to 30\n"
       " -Y/--speed-limit   Stop transfer if below speed-limit for 'speed-time' secs\n"
       " -z/--time-cond <time> Includes a time condition to the server (H)\n"
       " -2/--sslv2         Force usage of SSLv2 (H)\n"
       " -3/--sslv3         Force usage of SSLv3 (H)\n"
       " -#/--progress-bar  Display transfer progress as a progress bar\n"
       "    --crlf          Convert LF to CRLF in upload. Useful for MVS (OS/390)\n"
       "    --stderr <file> Where to redirect stderr. - means stdout.\n",
         curl_version()
         );
}

struct LongShort {
  char *letter;
  char *lname;
  bool extraparam;
};

struct Configurable {
  char *useragent;
  char *cookie;
  bool use_resume;
  int resume_from;
  char *postfields;
  char *referer;
  long timeout;
  char *outfile;
  char *headerfile;
  char remotefile;
  char *ftpport;
  unsigned short porttouse;
  char *range;
  int low_speed_limit;
  int low_speed_time;
  bool showerror;
  char *infile;
  char *userpwd;
  char *proxyuserpwd;
  char *proxy;
  bool configread;
  long conf;
  char *url;
  char *cert;
  char *cert_passwd;
  bool crlf;
  char *cookiefile;
  char *customrequest;
  bool progressmode;
  bool nobuffer;

  char *writeout; /* %-styled format string to output */

  FILE *errors; /* if stderr redirect is requested */

  struct curl_slist *quote;
  struct curl_slist *postquote;

  long ssl_version;
  TimeCond timecond;
  time_t condtime;

  struct HttpHeader *headers;
  struct HttpHeader *last_header;

  struct HttpPost *httppost;
  struct HttpPost *last_post;
};

static int parseconfig(char *filename,
		       struct Configurable *config);
static char *my_get_line(FILE *fp);
static char *my_get_token(const char *line);

static void GetStr(char **string,
		   char *value)
{
  if(*string)
    free(*string);
  if(value && *value)
    *string = strdup(value);
  else
    *string = NULL;
}

static char *file2string(FILE *file)
{
  char buffer[256];
  char *ptr;
  char *string=NULL;
  int len=0;
  int stringlen;

  if(file) {
    while(fgets(buffer, sizeof(buffer), file)) {
      ptr= strchr(buffer, '\r');
      if(ptr)
        *ptr=0;
      ptr= strchr(buffer, '\n');
      if(ptr)
        *ptr=0;
      stringlen=strlen(buffer);
      if(string)
        string = realloc(string, len+stringlen+1);
      else
        string = malloc(stringlen+1);

      strcpy(string+len, buffer);

      len+=stringlen;
    }
    return string;
  }
  else
    return NULL; /* no string */
}

static int getparameter(char *flag, /* f or -long-flag */
			char *nextarg, /* NULL if unset */
			bool *usedarg, /* set to TRUE if the arg has been
					  used */
			struct Configurable *config)
{
  char letter;
  char *parse=NULL;
  int res;
  struct HttpHeader *head;
  int j;
  time_t now;
  int hit=-1;

  /* single-letter,
     long-name,
     boolean whether it takes an additional argument
     */
  struct LongShort aliases[]= {
    {"9", "crlf",        FALSE},
    {"8", "stderr",      TRUE},

    {"2", "sslv2",       FALSE},
    {"3", "sslv3",       FALSE},
    {"a", "append",      FALSE},
    {"A", "user-agent",  TRUE},
    {"b", "cookie",      TRUE},
    {"B", "ftp-ascii",   FALSE},
    {"c", "continue",    FALSE},
    {"C", "continue-at", TRUE},
    {"d", "data",        TRUE},
    {"D", "dump-header", TRUE},
    {"e", "referer",     TRUE},
    {"E", "cert",        TRUE},
    {"f", "fail",        FALSE},
    {"F", "form",        TRUE},

    {"h", "help",        FALSE},
    {"H", "header",      TRUE},
    {"i", "include",     FALSE},
    {"I", "head",        FALSE},
    {"K", "config",      TRUE},
    {"l", "list-only",   FALSE},
    {"L", "location",    FALSE},
    {"m", "max-time",    TRUE},
    {"M", "manual",      FALSE},
    {"n", "netrc",       FALSE},
    {"N", "no-buffer",   FALSE},
    {"o", "output",      TRUE},
    {"O", "remote-name", FALSE},
#if 0
    {"p", "port",        TRUE},
#endif
    {"P", "ftpport",     TRUE},
    {"q", "disable",     FALSE},
    {"Q", "quote",       TRUE},
    {"r", "range",       TRUE},
    {"s", "silent",      FALSE},
    {"S", "show-error",  FALSE},
    {"t", "upload",      FALSE},
    {"T", "upload-file", TRUE},
    {"u", "user",        TRUE},
    {"U", "proxy-user",  TRUE},
    {"v", "verbose",     FALSE},
    {"V", "version",     FALSE},
    {"w", "write-out",   TRUE},
    {"x", "proxy",       TRUE},
    {"X", "request",     TRUE},
    {"X", "http-request", TRUE}, /* OBSOLETE VERSION */
    {"Y", "speed-limit",  TRUE},
    {"y", "speed-time", TRUE},
    {"z", "time-cond",   TRUE},
    {"#", "progress-bar",FALSE},
  };

  if('-' == flag[0]) {
    /* try a long name */
    int fnam=strlen(&flag[1]);
    for(j=0; j< sizeof(aliases)/sizeof(aliases[0]); j++) {
      if(strnequal(aliases[j].lname, &flag[1], fnam)) {
        if(strequal(aliases[j].lname, &flag[1])) {
          parse = aliases[j].letter;
          hit = j;
          break;
        }
	if(parse) {
	  /* this is the second match, we can't continue! */
	  helpf("option --%s is ambiguous\n", &flag[1]);
	  return CURLE_FAILED_INIT;
	}
	parse = aliases[j].letter;
	hit = j;
      }
    }
    if(hit < 0) {
      helpf("unknown option -%s.\n", flag);
      return CURLE_FAILED_INIT;
    }    
  }
  else {
    hit=-1;
    parse = flag;
  }

  do {
    /* we can loop here if we have multiple single-letters */

    letter = parse?*parse:'\0';
    *usedarg = FALSE; /* default is that we don't use the arg */

#if 0
    fprintf(stderr, "OPTION: %c %s\n", letter, nextarg?nextarg:"<null>");
#endif
    if(hit < 0) {
      for(j=0; j< sizeof(aliases)/sizeof(aliases[0]); j++) {
	if(letter == *aliases[j].letter) {
	  hit = j;
	  break;
	}
      }
      if(hit < 0) {
	helpf("unknown option -%c.\n", letter);
	return CURLE_FAILED_INIT;      
      }
    }
    if(hit < 0) {
      helpf("unknown option -%c.\n", letter);
      return CURLE_FAILED_INIT;
    }    
    if(!nextarg && aliases[hit].extraparam) {
      helpf("option -%s/--%s requires an extra argument!\n",
	    aliases[hit].letter,
	    aliases[hit].lname);
      return CURLE_FAILED_INIT;
    }
    else if(nextarg && aliases[hit].extraparam)
      *usedarg = TRUE; /* mark it as used */

    switch(letter) {
    case 'z': /* time condition coming up */
      switch(*nextarg) {
      case '+':
        nextarg++;
      default:
        /* If-Modified-Since: (section 14.28 in RFC2068) */
        config->timecond = TIMECOND_IFMODSINCE;
        break;
      case '-':
        /* If-Unmodified-Since:  (section 14.24 in RFC2068) */
        config->timecond = TIMECOND_IFUNMODSINCE;
        nextarg++;
        break;
      case '=':
        /* Last-Modified:  (section 14.29 in RFC2068) */
        config->timecond = TIMECOND_LASTMOD;
        nextarg++;
        break;
      }
      now=time(NULL);
      config->condtime=curl_getdate(nextarg, &now);
      if(-1 == config->condtime) {
        /* now let's see if it is a file name to get the time from instead! */
        struct stat statbuf;
        if(-1 == stat(nextarg, &statbuf)) {
          /* failed, remove time condition */
          config->timecond = TIMECOND_NONE;
        }
        else {
          /* pull the time out from the file */
          config->condtime = statbuf.st_mtime;
        }
      }
      break;
    case '9': /* there is no short letter for this */
      /* LF -> CRLF conversinon? */
      config->crlf = TRUE;
      break;
    case '8': /* there is no short letter for this */
      if(strcmp(nextarg, "-"))
        config->errors = fopen(nextarg, "wt");
      else
        config->errors = stdout;
      break;
    case '#': /* added 19990617 larsa */
      config->progressmode ^= CURL_PROGRESS_BAR;
      break;
    case '2': 
      /* SSL version 2 */
      config->ssl_version = 2;
      break;
    case '3': 
      /* SSL version 2 */
      config->ssl_version = 3;
      break;
    case 'a':
      /* This makes the FTP sessions use APPE instead of STOR */
      config->conf ^= CONF_FTPAPPEND;
      break;
    case 'A':
      /* This specifies the User-Agent name */
      GetStr(&config->useragent, nextarg);
      break;
    case 'b': /* cookie string coming up: */
      if(nextarg[0] == '@') {
        nextarg++;
      }
      else if(strchr(nextarg, '=')) {
        /* A cookie string must have a =-letter */
        GetStr(&config->cookie, nextarg);
        break;
      }
      /* We have a cookie file to read from! */
      GetStr(&config->cookiefile, nextarg);
      break;
    case 'B':
      /* use type ASCII when transfering ftp files */
      config->conf ^= CONF_FTPASCII;
      break;
    case 'c':
      /* This makes us continue an ftp transfer */
      config->use_resume^=TRUE;
      break;
    case 'C':
      /* This makes us continue an ftp transfer at given position */
      config->resume_from= atoi(nextarg);
      config->use_resume=TRUE;
      break;
    case 'd':
      /* postfield data */
      if('@' == *nextarg) {
        /* the data begins with a '@' letter, it means that a file name
           or - (stdin) follows */
        FILE *file;
        nextarg++; /* pass the @ */
        if(strequal("-", nextarg))
          file = stdin;
        else 
          file = fopen(nextarg, "r");
        config->postfields = file2string(file);
        if(file && (file != stdin))
          fclose(stdin);
      }
      else {
        GetStr(&config->postfields, nextarg);
      }
      if(config->postfields)
        config->conf |= CONF_POST;
      break;
    case 'D':
      /* dump-header to given file name */
      GetStr(&config->headerfile, nextarg);
      break;
    case 'e':
      GetStr(&config->referer, nextarg);
      break;
    case 'E':
      {
	char *ptr = strchr(nextarg, ':');
	if(ptr) {
	  /* we have a password too */
	  *ptr=0;
	  ptr++;
	  GetStr(&config->cert_passwd, ptr);
	}
	GetStr(&config->cert, nextarg);
      }
      break;
    case 'f':
      /* fail hard on errors  */
      config->conf ^= CONF_FAILONERROR;
      break;
    case 'F':
      /* "form data" simulation, this is a little advanced so lets do our best
	 to sort this out slowly and carefully */
      if(curl_FormParse(nextarg,
                        &config->httppost,
                        &config->last_post))
	return CURLE_FAILED_INIT;    
      break;

    case 'h': /* h for help */
      help();
      return CURLE_FAILED_INIT;
    case 'H':
      head = (struct HttpHeader *)malloc(sizeof(struct HttpHeader));
      if(head) {
	head->next = NULL;
	head->header = NULL; /* first zero this */
	GetStr(&head->header, nextarg); /* now get the header line */

	/* point on our new one */
	if(config->last_header)
	  config->last_header->next = head;
	else {
	  config->headers = head;
	}

	config->last_header = head;
      }
      break;
    case 'i':
      config->conf ^= CONF_HEADER; /* include the HTTP header as well */
      break;
    case 'I':
      config->conf ^= CONF_HEADER; /* include the HTTP header in the output */
      config->conf ^= CONF_NOBODY; /* don't fetch the body at all */
      break;
    case 'K':
      res = parseconfig(nextarg, config);
      config->configread = TRUE;
      if(res)
	return res;
      break;
    case 'l':
      config->conf ^= CONF_FTPLISTONLY; /* only list the names of the FTP dir */
      break;
    case 'L':
      config->conf ^= CONF_FOLLOWLOCATION; /* Follow Location: HTTP headers */
      break;
    case 'm':
      /* specified max time */
      config->timeout = atoi(nextarg);
      break;
    case 'M': /* M for manual, huge help */
      hugehelp();
      return CURLE_FAILED_INIT;
    case 'n':
      /* pick info from .netrc, if this is used for http, curl will
	 automatically enfore user+password with the request */
      config->conf ^= CONF_NETRC;
      break;
    case 'N':
      /* disable the output I/O buffering */
      config->nobuffer ^= 1;
      break;
    case 'o':
      /* output file */
      GetStr(&config->outfile, nextarg); /* write to this file */
      break;
    case 'O':
      /* output file */
      config->remotefile ^= TRUE;
      break;
    case 'P':
      /* This makes the FTP sessions use PORT instead of PASV */
      /* use <eth0> or <192.168.10.10> style addresses. Anything except
	 this will make us try to get the "default" address.
	 NOTE: this is a changed behaviour since the released 4.1!
	 */
      GetStr(&config->ftpport, nextarg);
      break;
#if 0
    case 'p':
      /* specified port */
      fputs("You've used the -p option, it will be removed in a future version\n",
	    stderr);
      config->porttouse = atoi(nextarg);
      config->conf |= CONF_PORT; /* changed port */
      break;
#endif
    case 'q': /* if used first, already taken care of, we do it like
		 this so we don't cause an error! */
      break;
    case 'Q':
      /* QUOTE command to send to FTP server */
      if(nextarg[0] == '-') {
        /* prefixed with a dash makes it a POST TRANSFER one */
        nextarg++;
        config->postquote = curl_slist_append(config->postquote, nextarg);
      }
      else {
        config->quote = curl_slist_append(config->quote, nextarg);
      }
      break;
    case 'r':
      /* byte range requested */
      GetStr(&config->range, nextarg);
      break;
    case 's':
      /* don't show progress meter, don't show errors : */
      config->conf |= (CONF_MUTE|CONF_NOPROGRESS);
      config->showerror ^= TRUE; /* toggle off */
      break;
    case 'S':
      /* show errors */
      config->showerror ^= TRUE; /* toggle on if used with -s */
      break;
    case 't':
      /* we are uploading */
      config->conf ^= CONF_UPLOAD;
      break;
    case 'T':
      /* we are uploading */
      config->conf |= CONF_UPLOAD;
      GetStr(&config->infile, nextarg);
      break;
    case 'u':
      /* user:password  */
      GetStr(&config->userpwd, nextarg);
      break;
    case 'U':
      /* Proxy user:password  */
      GetStr(&config->proxyuserpwd, nextarg);
      break;
    case 'v':
      config->conf ^= CONF_VERBOSE; /* talk a lot */
      break;
    case 'V':
      printf(CURL_ID "%s\n", curl_version());
      return CURLE_FAILED_INIT;
    case 'w':
      /* get the output string */
      if('@' == *nextarg) {
        /* the data begins with a '@' letter, it means that a file name
           or - (stdin) follows */
        FILE *file;
        nextarg++; /* pass the @ */
        if(strequal("-", nextarg))
          file = stdin;
        else 
          file = fopen(nextarg, "r");
        config->writeout = file2string(file);
        if(file && (file != stdin))
          fclose(stdin);
      }
      else 
        GetStr(&config->writeout, nextarg);
      break;
    case 'x':
      /* proxy */
      GetStr(&config->proxy, nextarg);
      break;
    case 'X':
      /* HTTP request */
      GetStr(&config->customrequest, nextarg);
      break;
    case 'y':
      /* low speed time */
      config->low_speed_time = atoi(nextarg);
      if(!config->low_speed_limit)
	config->low_speed_limit = 1;
      break;
    case 'Y':
      /* low speed limit */
      config->low_speed_limit = atoi(nextarg);
      if(!config->low_speed_time)
	config->low_speed_time=30;
      break;

    default: /* unknown flag */
      if(letter)	
	helpf("Unknown option '%c'\n", letter);
      else
	helpf("Unknown option\n"); /* short help blurb */
      return CURLE_FAILED_INIT;
    }
    hit = -1;

  } while(*++parse && !*usedarg);

  return CURLE_OK;
}


static int parseconfig(char *filename,
		       struct Configurable *config)
{
  int res;
  FILE *file;
  char configbuffer[4096];
  char filebuffer[256];
  bool usedarg;
  char *home=NULL;
  
  if(!filename || !*filename) {
    /* NULL or no file name attempts to load .curlrc from the homedir! */

#define CURLRC DOT_CHAR "curlrc"

    home = curl_GetEnv("HOME"); /* portable environment reader */

    if(!home)
      return CURLE_OK;
    if(strlen(home)>(sizeof(filebuffer)-strlen(CURLRC))) {
      free(home);
      return CURLE_OK;
    }

    sprintf(filebuffer, "%s%s%s", home, DIR_CHAR, CURLRC);

    filename = filebuffer;
  }

  if(strcmp(filename,"-"))
    file = fopen(filename, "r");
  else
    file = stdin;
  
  if(file)
  {
    char *line;
    char *tok1;
    char *tok2;

    while (NULL != (line = my_get_line(file)))
    {
      /* lines with # in the fist column is a comment! */
      if ('#' == line[0])
      {
        free(line);
        continue;
      }

      if (NULL == (tok1 = my_get_token(line)))
      {
        free(line);
        continue;
      }
      if ('-' != tok1[0])
      {
        if (config->url)
          free(config->url);
        config->url = tok1;
      }

      while ((NULL != tok1) && ('-' == tok1[0]))
      {
        tok2 = my_get_token(NULL);
        while (NULL == tok2)
        {
          free(line);
          if (NULL == (line = my_get_line(file)))
            break;
          if ('#' == line[0])
            continue;
          tok2 = my_get_token(line);
        }

        res = getparameter(tok1 + 1, tok2, &usedarg, config);
        free(tok1);
        if (!usedarg)
          tok1 = tok2;
        else
        {
          free(tok2);
          break;
        }
      }

      free(line);
    }
    if(file != stdin)
      fclose(file);
  }
  if(home)
    free(home);
  return CURLE_OK;
}

struct OutStruct {
  char *filename;
  FILE *stream;
};

/* having this global is a bit dirty, but hey, who said we weren't? ;-) */
struct Configurable config;

int my_fwrite(void *buffer, size_t size, size_t nmemb, FILE *stream)
{
  struct OutStruct *out=(struct OutStruct *)stream;
  if(out && !out->stream) {
    /* open file for writing */
    out->stream=fopen(out->filename, "wb");
    if(!out->stream)
      return -1; /* failure */
    if(config.nobuffer) {
      /* disable output buffering */
#ifdef HAVE_SETVBUF
      setvbuf(out->stream, NULL, _IONBF, 0);
#endif
    }
  }
  return fwrite(buffer, size, nmemb, out->stream);
}


int main(int argc, char *argv[])
{
  char errorbuffer[CURL_ERROR_SIZE];

  struct OutStruct outs;
  struct OutStruct heads;

  char *url = NULL;

  URLGlob *urls;
  int urlnum;
  char *outfiles = NULL;
  int separator = 0;
  
  FILE *infd = stdin;
  FILE *headerfilep = NULL;
  char *urlbuffer=NULL;
  int infilesize=-1; /* -1 means unknown */
  bool stillflags=TRUE;

  CURL *curl;
  int res=CURLE_OK;
  int i;

  outs.stream = stdout;

  memset(&config, 0, sizeof(struct Configurable));
  
  /* set non-zero default values: */
  config.useragent= maprintf(CURL_NAME "/" CURL_VERSION " (" OS ") "
                             "%s", curl_version());
  config.showerror=TRUE;
  config.conf=CONF_DEFAULT;
#if 0
  config.crlf=FALSE;
  config.quote=NULL;
#endif

  if(argc>1 &&
     (!strnequal("--", argv[1], 2) && (argv[1][0] == '-')) &&
     strchr(argv[1], 'q')) {
    /*
     * The first flag, that is not a verbose name, but a shortname
     * and it includes the 'q' flag!
     */
#if 0
    fprintf(stderr, "I TURNED OFF THE CRAP\n");
#endif
    ;
  }
  else {
    res = parseconfig(NULL, &config);
    if(res)
      return res;
  }

  if ((argc < 2)  && !config.url) {
    helpf(NULL);
    return CURLE_FAILED_INIT;
  }

  /* Parse options */
  for (i = 1; i < argc; i++) {
    if(stillflags &&
       ('-' == argv[i][0])) {
      char *nextarg;
      bool passarg;
      
      char *flag = &argv[i][1];

      if(strequal("--", argv[i]))
	/* this indicates the end of the flags and thus enables the
	   following (URL) argument to start with -. */
	stillflags=FALSE;
      else {
	nextarg= (i < argc - 1)? argv[i+1]: NULL;

	res = getparameter ( flag,
			     nextarg,
			     &passarg,
			   &config );
	if(res)
	  return res;

	if(passarg) /* we're supposed to skip this */
	  i++;
      }
    }
    else {
      if(url) {
	helpf("only one URL is supported!\n");
	return CURLE_FAILED_INIT;
      }
      url = argv[i];
    }
  }

  /* if no URL was specified and there was one in the config file, get that
     one */
  if(!url && config.url)
    url = config.url;
  
  if(!url) {
    helpf("no URL specified!\n");
    return CURLE_FAILED_INIT;
  }
#if 0
  fprintf(stderr, "URL: %s PROXY: %s\n", url, config.proxy?config.proxy:"none");
#endif

  /* expand '{...}' and '[...]' expressions and return total number of URLs
     in pattern set */
  res = glob_url(&urls, url, &urlnum);
  if(res != CURLE_OK)
    return res;

  outfiles = config.outfile;		/* save outfile pattern befor expansion */
  if (!outfiles && !config.remotefile && urlnum > 1) {
#ifdef CURL_SEPARATORS
    /* multiple files extracted to stdout, insert separators! */
    separator = 1;
#endif
#ifdef MIME_SEPARATORS
    /* multiple files extracted to stdout, insert MIME separators! */
    separator = 1;
    printf("MIME-Version: 1.0\n");
    printf("Content-Type: multipart/mixed; boundary=%s\n\n", MIMEseparator);
#endif
  }
  for (i = 0; (url = next_url(urls)); ++i) {
    if (outfiles)
      config.outfile = strdup(outfiles);

  if(config.outfile && config.infile) {
    helpf("you can't both upload and download!\n");
    return CURLE_FAILED_INIT;
  }
 
  if (config.outfile || config.remotefile) {
    /* 
     * We have specified a file name to store the result in, or we have
     * decided we want to use the remote file name.
     */

    if(config.remotefile) {
      /* Find and get the remote file name */
      config.outfile=strstr(url, "://");
      if(config.outfile)
        config.outfile+=3;
      else
        config.outfile=url;
      config.outfile = strrchr(config.outfile, '/');
      if(!config.outfile || !strlen(++config.outfile)) {
        helpf("Remote file name has no length!\n");
        return CURLE_WRITE_ERROR;
      }
    }
    else	/* fill '#1' ... '#9' terms from URL pattern */
      config.outfile = match_url(config.outfile, *urls);

    if((0 == config.resume_from) && config.use_resume) {
      /* we're told to continue where we are now, then we get the size of the
	 file as it is now and open it for append instead */
      struct stat fileinfo;

      if(0 == stat(config.outfile, &fileinfo)) {
	/* set offset to current file size: */
	config.resume_from = fileinfo.st_size;
      }
      /* else let offset remain 0 */
    }

    if(config.resume_from) {
      /* open file for output: */
      outs.stream=(FILE *) fopen(config.outfile, config.resume_from?"ab":"wb");
      if (!outs.stream) {
        helpf("Can't open '%s'!\n", config.outfile);
        return CURLE_WRITE_ERROR;
      }
    }
    else {
      outs.filename = config.outfile;
      outs.stream = NULL; /* open when needed */
    }
  }
  if (config.infile) {
    /*
     * We have specified a file to upload
     */
    struct stat fileinfo;

    /* If no file name part is given in the URL, we add this file name */
    char *ptr=strstr(url, "://");
    if(ptr)
      ptr+=3;
    else
      ptr=url;
    ptr = strrchr(ptr, '/');
    if(!ptr || !strlen(++ptr)) {
      /* The URL has no file name part, add the local file name. In order
         to be able to do so, we have to create a new URL in another buffer.*/
      urlbuffer=(char *)malloc(strlen(url) + strlen(config.infile) + 3);
      if(!urlbuffer) {
        helpf("out of memory\n");
        return CURLE_OUT_OF_MEMORY;
      }
      if(ptr)
        /* there is a trailing slash on the URL */
        sprintf(urlbuffer, "%s%s", url, config.infile);
      else
        /* thers is no trailing slash on the URL */
        sprintf(urlbuffer, "%s/%s", url, config.infile);

      url = urlbuffer; /* use our new URL instead! */
    }

    infd=(FILE *) fopen(config.infile, "rb");
    if (!infd || stat(config.infile, &fileinfo)) {
      helpf("Can't open '%s'!\n", config.infile);
      return CURLE_READ_ERROR;
    }
    infilesize=fileinfo.st_size;

  }
  if((config.conf&CONF_UPLOAD) &&
     config.use_resume &&
     (0==config.resume_from)) {
    config.resume_from = -1; /* -1 will then force get-it-yourself */
  }
  if(config.headerfile) {
    /* open file for output: */
    if(strcmp(config.headerfile,"-"))
    {
      heads.filename = config.headerfile;
      headerfilep=NULL;
    }
    else
      headerfilep=stdout;
    heads.stream = headerfilep;
  }

  if(outs.stream && isatty(fileno(outs.stream)) &&
     !(config.conf&(CONF_UPLOAD|CONF_HTTPPOST)))
    /* we send the output to a tty and it isn't an upload operation, therefore
       we switch off the progress meter */
    config.conf |= CONF_NOPROGRESS;


  if (urlnum > 1) {
    fprintf(stderr, "\n[%d/%d]: %s --> %s\n", i+1, urlnum, url, config.outfile ? config.outfile : "<stdout>");
    if (separator) {
#ifdef CURL_SEPARATORS
      printf("%s%s\n", CURLseparator, url);
#endif
#ifdef MIME_SEPARATORS
      printf("--%s\n", MIMEseparator);
      printf("Content-ID: %s\n\n", url); 
#endif
    }
  }

  if(!config.errors)
    config.errors = stderr;

  main_init();

#if 0
  /* This is code left from the pre-v7 time, left here mainly as a reminder
     and possibly as a warning! ;-) */

  res = curl_urlget(CURLOPT_FILE, (FILE *)&outs,  /* where to store */
                    CURLOPT_WRITEFUNCTION, my_fwrite, /* what call to write */
                    CURLOPT_INFILE, infd, /* for uploads */
                    CURLOPT_INFILESIZE, infilesize, /* size of uploaded file */
                    CURLOPT_URL, url,     /* what to fetch */
                    CURLOPT_PROXY, config.proxy, /* proxy to use */
                    CURLOPT_FLAGS, config.conf, /* flags */
                    CURLOPT_USERPWD, config.userpwd, /* user + passwd */
                    CURLOPT_PROXYUSERPWD, config.proxyuserpwd, /* Proxy user + passwd */
                    CURLOPT_RANGE, config.range, /* range of document */
                    CURLOPT_ERRORBUFFER, errorbuffer,
                    CURLOPT_TIMEOUT, config.timeout,
                    CURLOPT_POSTFIELDS, config.postfields,
                    CURLOPT_REFERER, config.referer,
                    CURLOPT_USERAGENT, config.useragent,
                    CURLOPT_FTPPORT, config.ftpport,
                    CURLOPT_LOW_SPEED_LIMIT, config.low_speed_limit,
                    CURLOPT_LOW_SPEED_TIME, config.low_speed_time,
                    CURLOPT_RESUME_FROM, config.use_resume?config.resume_from:0,
                    CURLOPT_COOKIE, config.cookie,
                    CURLOPT_HTTPHEADER, config.headers,
                    CURLOPT_HTTPPOST, config.httppost,
                    CURLOPT_SSLCERT, config.cert,
                    CURLOPT_SSLCERTPASSWD, config.cert_passwd,
                    CURLOPT_CRLF, config.crlf,
                    CURLOPT_QUOTE, config.quote,
                    CURLOPT_POSTQUOTE, config.postquote,
                    CURLOPT_WRITEHEADER, config.headerfile?&heads:NULL,
                    CURLOPT_COOKIEFILE, config.cookiefile,
                    CURLOPT_SSLVERSION, config.ssl_version,
                    CURLOPT_TIMECONDITION, config.timecond,
                    CURLOPT_TIMEVALUE, config.condtime,
                    CURLOPT_CUSTOMREQUEST, config.customrequest,
                    CURLOPT_STDERR, config.errors,
                    CURLOPT_PROGRESSMODE, config.progressmode,
                    CURLOPT_WRITEINFO, config.writeout,
                    CURLOPT_DONE); /* always terminate the list of tags */

#endif
  /* The new, v7-style easy-interface! */
  curl = curl_easy_init();
  if(curl) {
    curl_easy_setopt(curl, CURLOPT_FILE, (FILE *)&outs);  /* where to store */
    curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, my_fwrite); /* what call to write */
    curl_easy_setopt(curl, CURLOPT_INFILE, infd); /* for uploads */
    curl_easy_setopt(curl, CURLOPT_INFILESIZE, infilesize); /* size of uploaded file */
    curl_easy_setopt(curl, CURLOPT_URL, url);     /* what to fetch */
    curl_easy_setopt(curl, CURLOPT_PROXY, config.proxy); /* proxy to use */
#if 0
    curl_easy_setopt(curl, CURLOPT_FLAGS, config.conf); /* flags */
#else
    curl_easy_setopt(curl, CURLOPT_VERBOSE, config.conf&CONF_VERBOSE);
    curl_easy_setopt(curl, CURLOPT_HEADER, config.conf&CONF_HEADER);
    curl_easy_setopt(curl, CURLOPT_NOPROGRESS, config.conf&CONF_NOPROGRESS);
    curl_easy_setopt(curl, CURLOPT_NOBODY, config.conf&CONF_NOBODY);
    curl_easy_setopt(curl, CURLOPT_FAILONERROR, config.conf&CONF_FAILONERROR);
    curl_easy_setopt(curl, CURLOPT_UPLOAD, config.conf&CONF_UPLOAD);
    curl_easy_setopt(curl, CURLOPT_POST, config.conf&CONF_POST);
    curl_easy_setopt(curl, CURLOPT_FTPLISTONLY, config.conf&CONF_FTPLISTONLY);
    curl_easy_setopt(curl, CURLOPT_FTPAPPEND, config.conf&CONF_FTPAPPEND);
    curl_easy_setopt(curl, CURLOPT_NETRC, config.conf&CONF_NETRC);
    curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, config.conf&CONF_FOLLOWLOCATION);
    curl_easy_setopt(curl, CURLOPT_FTPASCII, config.conf&CONF_FTPASCII);

    curl_easy_setopt(curl, CURLOPT_PUT, config.conf&CONF_PUT);
    curl_easy_setopt(curl, CURLOPT_MUTE, config.conf&CONF_MUTE);
#endif


    curl_easy_setopt(curl, CURLOPT_USERPWD, config.userpwd); /* user + passwd */
    curl_easy_setopt(curl, CURLOPT_PROXYUSERPWD, config.proxyuserpwd); /* Proxy user + passwd */
    curl_easy_setopt(curl, CURLOPT_RANGE, config.range); /* range of document */
    curl_easy_setopt(curl, CURLOPT_ERRORBUFFER, errorbuffer);
    curl_easy_setopt(curl, CURLOPT_TIMEOUT, config.timeout);
    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, config.postfields);
    curl_easy_setopt(curl, CURLOPT_REFERER, config.referer);
    curl_easy_setopt(curl, CURLOPT_USERAGENT, config.useragent);
    curl_easy_setopt(curl, CURLOPT_FTPPORT, config.ftpport);
    curl_easy_setopt(curl, CURLOPT_LOW_SPEED_LIMIT, config.low_speed_limit);
    curl_easy_setopt(curl, CURLOPT_LOW_SPEED_TIME, config.low_speed_time);
    curl_easy_setopt(curl, CURLOPT_RESUME_FROM, config.use_resume?config.resume_from:0);
    curl_easy_setopt(curl, CURLOPT_COOKIE, config.cookie);
    curl_easy_setopt(curl, CURLOPT_HTTPHEADER, config.headers);
    curl_easy_setopt(curl, CURLOPT_HTTPPOST, config.httppost);
    curl_easy_setopt(curl, CURLOPT_SSLCERT, config.cert);
    curl_easy_setopt(curl, CURLOPT_SSLCERTPASSWD, config.cert_passwd);
    curl_easy_setopt(curl, CURLOPT_CRLF, config.crlf);
    curl_easy_setopt(curl, CURLOPT_QUOTE, config.quote);
    curl_easy_setopt(curl, CURLOPT_POSTQUOTE, config.postquote);
    curl_easy_setopt(curl, CURLOPT_WRITEHEADER, config.headerfile?&heads:NULL);
    curl_easy_setopt(curl, CURLOPT_COOKIEFILE, config.cookiefile);
    curl_easy_setopt(curl, CURLOPT_SSLVERSION, config.ssl_version);
    curl_easy_setopt(curl, CURLOPT_TIMECONDITION, config.timecond);
    curl_easy_setopt(curl, CURLOPT_TIMEVALUE, config.condtime);
    curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, config.customrequest);
    curl_easy_setopt(curl, CURLOPT_STDERR, config.errors);
    curl_easy_setopt(curl, CURLOPT_PROGRESSMODE, config.progressmode);
    curl_easy_setopt(curl, CURLOPT_WRITEINFO, config.writeout);

    res = curl_easy_perform(curl);

    /* always cleanup */
    curl_easy_cleanup(curl);

    if((res!=CURLE_OK) && config.showerror)
      fprintf(config.errors, "curl: (%d) %s\n", res, errorbuffer);
  }
  else
    fprintf(config.errors, "curl: failed to init libcurl!\n");

  main_free();

  if((config.errors != stderr) &&
     (config.errors != stdout))
    /* it wasn't directed to stdout or stderr so close the file! */
    fclose(config.errors);

  if(config.headerfile && !headerfilep && heads.stream)
    fclose(heads.stream);

  if(urlbuffer)
    free(urlbuffer);
  if (config.outfile && outs.stream)
    fclose(outs.stream);
  if (config.infile)
    fclose(infd);
  if(headerfilep)
    fclose(headerfilep);

  if(config.url)
    free(config.url);

  if(url)
    free(url);
  if(config.outfile && !config.remotefile)
    free(config.outfile);
  }
#ifdef MIME_SEPARATORS
  if (separator)
    printf("--%s--\n", MIMEseparator);
#endif

  curl_slist_free_all(config.quote); /* the checks for config.quote == NULL */

  return(res);
}

static char *my_get_line(FILE *fp)
{
   char buf[4096];
   char *nl = NULL;
   char *retval = NULL;

   do
   {
      if (NULL == fgets(buf, sizeof(buf), fp))
         break;
      if (NULL == retval)
         retval = strdup(buf);
      else
      {
         if (NULL == (retval = realloc(retval,
                                       strlen(retval) + strlen(buf) + 1)))
            break;
         strcat(retval, buf);
      }
   }
   while (NULL == (nl = strchr(retval, '\n')));

   if (NULL != nl)
     *nl = '\0';

   return retval;
}

static char *my_get_token(const char *line)
{
  static const char *save = NULL;
  const char *first = NULL;
  const char *last = NULL;
  char *retval = NULL;
  size_t size;

  if (NULL == line)
    line = save;
  if (NULL == line)
    return NULL;

  while (('\0' != *line) && (isspace(*line)))
    line++;
  first = line;
  while (('\0' != *line) && (!isspace(*line)))
    line++;
  save = line;
  while ('\0' != *line)
    line++;
  last = line;

  size = last - first;
  if (0 == size)
    return NULL;
  if (NULL == (retval = malloc(size + 1)))
    return NULL;
  memcpy(retval, first, size);
  retval[size] = '\0';
  return retval;
}