| # Locates the SDL_sound library |
| |
| # This module depends on SDL being found and |
| # must be called AFTER FindSDL.cmake is called. |
| |
| # This module defines |
| # SDL_SOUND_INCLUDE_DIR, where to find SDL_sound.h |
| # SDL_SOUND_FOUND, if false, do not try to link to SDL |
| # SDL_SOUND_LIBRARIES, this contains the list of libraries that you need |
| # to link against. This is a read-only variable and is marked INTERNAL. |
| # SDL_SOUND_EXTRAS, this is an optional variable for you to add your own |
| # flags to SDL_SOUND_LIBRARIES. This is prepended to SDL_SOUND_LIBRARIES. |
| # This is available mostly for cases this module failed to anticipate for |
| # and you must add additional flags. This is marked as ADVANCED. |
| |
| # |
| # This module also defines (but you shouldn't need to use directly) |
| # SDL_SOUND_LIBRARY, the name of just the SDL_sound library you would link |
| # against. Use SDL_SOUND_LIBRARIES for you link instructions and not this one. |
| # And might define the following as needed |
| # MIKMOD_LIBRARY |
| # MODPLUG_LIBRARY |
| # OGG_LIBRARY |
| # VORBIS_LIBRARY |
| # SMPEG_LIBRARY |
| # FLAC_LIBRARY |
| # SPEEX_LIBRARY |
| # |
| # Typically, you should not use these variables directly, and you should use |
| # SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other audio libraries |
| # (if needed) to successfully compile on your system . |
| # |
| # Created by Eric Wing. |
| # This module is a bit more complicated than the other FindSDL* family modules. |
| # The reason is that SDL_sound can be compiled in a large variety of different ways |
| # which are independent of platform. SDL_sound may dynamically link against other 3rd |
| # party libraries to get additional codec support, such as Ogg Vorbis, SMPEG, ModPlug, |
| # MikMod, FLAC, Speex, and potentially others. |
| # Under some circumstances which I don't fully understand, |
| # there seems to be a requirement |
| # that dependent libraries of libraries you use must also be explicitly |
| # linked against in order to successfully compile. SDL_sound does not currently |
| # have any system in place to know how it was compiled. |
| # So this CMake module does the hard work in trying to discover which 3rd party |
| # libraries are required for building (if any). |
| # This module uses a brute force approach to create a test program that uses SDL_sound, |
| # and then tries to build it. If the build fails, it parses the error output for |
| # known symbol names to figure out which libraries are needed. |
| # |
| # Responds to the $SDLDIR and $SDLSOUNDDIR environmental variable that would |
| # correspond to the ./configure --prefix=$SDLDIR used in building SDL. |
| # |
| # On OSX, this will prefer the Framework version (if found) over others. |
| # People will have to manually change the cache values of |
| # SDL_LIBRARY to override this selectionor set the CMake environment |
| # CMAKE_INCLUDE_PATH to modify the search paths. |
| # |
| |
| #============================================================================= |
| # Copyright 2005-2009 Kitware, Inc. |
| # |
| # Distributed under the OSI-approved BSD License (the "License"); |
| # see accompanying file Copyright.txt for details. |
| # |
| # This software is distributed WITHOUT ANY WARRANTY; without even the |
| # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| # See the License for more information. |
| #============================================================================= |
| # (To distribute this file outside of CMake, substitute the full |
| # License text for the above reference.) |
| |
| SET(SDL_SOUND_EXTRAS "" CACHE STRING "SDL_sound extra flags") |
| MARK_AS_ADVANCED(SDL_SOUND_EXTRAS) |
| |
| # Find SDL_sound.h |
| FIND_PATH(SDL_SOUND_INCLUDE_DIR SDL_sound.h |
| HINTS |
| $ENV{SDLSOUNDDIR}/include |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/include |
| $ENV{SDLDIR} |
| PATHS |
| /usr/local/include/SDL |
| /usr/include/SDL |
| /usr/local/include/SDL12 |
| /usr/local/include/SDL11 # FreeBSD ports |
| /usr/include/SDL12 |
| /usr/include/SDL11 |
| /usr/local/include |
| /usr/include |
| /sw/include/SDL # Fink |
| /sw/include |
| /opt/local/include/SDL # DarwinPorts |
| /opt/local/include |
| /opt/csw/include/SDL # Blastwave |
| /opt/csw/include |
| /opt/include/SDL |
| /opt/include |
| ) |
| |
| FIND_LIBRARY(SDL_SOUND_LIBRARY |
| NAMES SDL_sound |
| HINTS |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| PATHS |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| |
| IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) |
| |
| # CMake is giving me problems using TRY_COMPILE with the CMAKE_FLAGS |
| # for the :STRING syntax if I have multiple values contained in a |
| # single variable. This is a problem for the SDL_LIBRARY variable |
| # because it does just that. When I feed this variable to the command, |
| # only the first value gets the appropriate modifier (e.g. -I) and |
| # the rest get dropped. |
| # To get multiple single variables to work, I must separate them with a "\;" |
| # I could go back and modify the FindSDL.cmake module, but that's kind of painful. |
| # The solution would be to try something like: |
| # SET(SDL_TRY_COMPILE_LIBRARY_LIST "${SDL_TRY_COMPILE_LIBRARY_LIST}\;${CMAKE_THREAD_LIBS_INIT}") |
| # Instead, it was suggested on the mailing list to write a temporary CMakeLists.txt |
| # with a temporary test project and invoke that with TRY_COMPILE. |
| # See message thread "Figuring out dependencies for a library in order to build" |
| # 2005-07-16 |
| # TRY_COMPILE( |
| # MY_RESULT |
| # ${CMAKE_BINARY_DIR} |
| # ${PROJECT_SOURCE_DIR}/DetermineSoundLibs.c |
| # CMAKE_FLAGS |
| # -DINCLUDE_DIRECTORIES:STRING=${SDL_INCLUDE_DIR}\;${SDL_SOUND_INCLUDE_DIR} |
| # -DLINK_LIBRARIES:STRING=${SDL_SOUND_LIBRARY}\;${SDL_LIBRARY} |
| # OUTPUT_VARIABLE MY_OUTPUT |
| # ) |
| |
| # To minimize external dependencies, create a sdlsound test program |
| # which will be used to figure out if additional link dependencies are |
| # required for the link phase. |
| FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeTmp/DetermineSoundLibs.c |
| "#include \"SDL_sound.h\" |
| #include \"SDL.h\" |
| int main(int argc, char* argv[]) |
| { |
| Sound_AudioInfo desired; |
| Sound_Sample* sample; |
| |
| SDL_Init(0); |
| Sound_Init(); |
| |
| /* This doesn't actually have to work, but Init() is a no-op |
| * for some of the decoders, so this should force more symbols |
| * to be pulled in. |
| */ |
| sample = Sound_NewSampleFromFile(argv[1], &desired, 4096); |
| |
| Sound_Quit(); |
| SDL_Quit(); |
| return 0; |
| }" |
| ) |
| |
| # Calling |
| # TARGET_LINK_LIBRARIES(DetermineSoundLibs "${SDL_SOUND_LIBRARY} ${SDL_LIBRARY}) |
| # causes problems when SDL_LIBRARY looks like |
| # /Library/Frameworks/SDL.framework;-framework Cocoa |
| # The ;-framework Cocoa seems to be confusing CMake once the OS X |
| # framework support was added. I was told that breaking up the list |
| # would fix the problem. |
| SET(TMP_TRY_LIBS) |
| FOREACH(lib ${SDL_SOUND_LIBRARY} ${SDL_LIBRARY}) |
| SET(TMP_TRY_LIBS "${TMP_TRY_LIBS} \"${lib}\"") |
| ENDFOREACH(lib) |
| |
| # MESSAGE("TMP_TRY_LIBS ${TMP_TRY_LIBS}") |
| |
| # Write the CMakeLists.txt and test project |
| # Weird, this is still sketchy. If I don't quote the variables |
| # in the TARGET_LINK_LIBRARIES, I seem to loose everything |
| # in the SDL_LIBRARY string after the "-framework". |
| # But if I quote the stuff in INCLUDE_DIRECTORIES, it doesn't work. |
| FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeTmp/CMakeLists.txt |
| "PROJECT(DetermineSoundLibs) |
| INCLUDE_DIRECTORIES(${SDL_INCLUDE_DIR} ${SDL_SOUND_INCLUDE_DIR}) |
| ADD_EXECUTABLE(DetermineSoundLibs DetermineSoundLibs.c) |
| TARGET_LINK_LIBRARIES(DetermineSoundLibs ${TMP_TRY_LIBS})" |
| ) |
| |
| TRY_COMPILE( |
| MY_RESULT |
| ${PROJECT_BINARY_DIR}/CMakeTmp |
| ${PROJECT_BINARY_DIR}/CMakeTmp |
| DetermineSoundLibs |
| OUTPUT_VARIABLE MY_OUTPUT |
| ) |
| |
| # MESSAGE("${MY_RESULT}") |
| # MESSAGE(${MY_OUTPUT}) |
| |
| IF(NOT MY_RESULT) |
| |
| # I expect that MPGLIB, VOC, WAV, AIFF, and SHN are compiled in statically. |
| # I think Timidity is also compiled in statically. |
| # I've never had to explcitly link against Quicktime, so I'll skip that for now. |
| |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARY}) |
| |
| # Find MikMod |
| IF("${MY_OUTPUT}" MATCHES "MikMod_") |
| FIND_LIBRARY(MIKMOD_LIBRARY |
| NAMES libmikmod-coreaudio mikmod |
| PATHS |
| $ENV{MIKMODDIR}/lib |
| $ENV{MIKMODDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(MIKMOD_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MIKMOD_LIBRARY}) |
| ENDIF(MIKMOD_LIBRARY) |
| ENDIF("${MY_OUTPUT}" MATCHES "MikMod_") |
| |
| # Find ModPlug |
| IF("${MY_OUTPUT}" MATCHES "MODPLUG_") |
| FIND_LIBRARY(MODPLUG_LIBRARY |
| NAMES modplug |
| PATHS |
| $ENV{MODPLUGDIR}/lib |
| $ENV{MODPLUGDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(MODPLUG_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MODPLUG_LIBRARY}) |
| ENDIF(MODPLUG_LIBRARY) |
| ENDIF("${MY_OUTPUT}" MATCHES "MODPLUG_") |
| |
| |
| # Find Ogg and Vorbis |
| IF("${MY_OUTPUT}" MATCHES "ov_") |
| FIND_LIBRARY(VORBIS_LIBRARY |
| NAMES vorbis Vorbis VORBIS |
| PATHS |
| $ENV{VORBISDIR}/lib |
| $ENV{VORBISDIR} |
| $ENV{OGGDIR}/lib |
| $ENV{OGGDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(VORBIS_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${VORBIS_LIBRARY}) |
| ENDIF(VORBIS_LIBRARY) |
| |
| FIND_LIBRARY(OGG_LIBRARY |
| NAMES ogg Ogg OGG |
| PATHS |
| $ENV{OGGDIR}/lib |
| $ENV{OGGDIR} |
| $ENV{VORBISDIR}/lib |
| $ENV{VORBISDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(OGG_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY}) |
| ENDIF(OGG_LIBRARY) |
| ENDIF("${MY_OUTPUT}" MATCHES "ov_") |
| |
| |
| # Find SMPEG |
| IF("${MY_OUTPUT}" MATCHES "SMPEG_") |
| FIND_LIBRARY(SMPEG_LIBRARY |
| NAMES smpeg SMPEG Smpeg SMpeg |
| PATHS |
| $ENV{SMPEGDIR}/lib |
| $ENV{SMPEGDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(SMPEG_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SMPEG_LIBRARY}) |
| ENDIF(SMPEG_LIBRARY) |
| ENDIF("${MY_OUTPUT}" MATCHES "SMPEG_") |
| |
| |
| # Find FLAC |
| IF("${MY_OUTPUT}" MATCHES "FLAC_") |
| FIND_LIBRARY(FLAC_LIBRARY |
| NAMES flac FLAC |
| PATHS |
| $ENV{FLACDIR}/lib |
| $ENV{FLACDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(FLAC_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${FLAC_LIBRARY}) |
| ENDIF(FLAC_LIBRARY) |
| ENDIF("${MY_OUTPUT}" MATCHES "FLAC_") |
| |
| |
| # Hmmm...Speex seems to depend on Ogg. This might be a problem if |
| # the TRY_COMPILE attempt gets blocked at SPEEX before it can pull |
| # in the Ogg symbols. I'm not sure if I should duplicate the ogg stuff |
| # above for here or if two ogg entries will screw up things. |
| IF("${MY_OUTPUT}" MATCHES "speex_") |
| FIND_LIBRARY(SPEEX_LIBRARY |
| NAMES speex SPEEX |
| PATHS |
| $ENV{SPEEXDIR}/lib |
| $ENV{SPEEXDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(SPEEX_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SPEEX_LIBRARY}) |
| ENDIF(SPEEX_LIBRARY) |
| |
| # Find OGG (needed for Speex) |
| # We might have already found Ogg for Vorbis, so skip it if so. |
| IF(NOT OGG_LIBRARY) |
| FIND_LIBRARY(OGG_LIBRARY |
| NAMES ogg Ogg OGG |
| PATHS |
| $ENV{OGGDIR}/lib |
| $ENV{OGGDIR} |
| $ENV{VORBISDIR}/lib |
| $ENV{VORBISDIR} |
| $ENV{SPEEXDIR}/lib |
| $ENV{SPEEXDIR} |
| $ENV{SDLSOUNDDIR}/lib |
| $ENV{SDLSOUNDDIR} |
| $ENV{SDLDIR}/lib |
| $ENV{SDLDIR} |
| /usr/local/lib |
| /usr/lib |
| /sw/lib |
| /opt/local/lib |
| /opt/csw/lib |
| /opt/lib |
| ) |
| IF(OGG_LIBRARY) |
| SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY}) |
| ENDIF(OGG_LIBRARY) |
| ENDIF(NOT OGG_LIBRARY) |
| ENDIF("${MY_OUTPUT}" MATCHES "speex_") |
| |
| ELSE(NOT MY_RESULT) |
| SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARY}" CACHE INTERNAL "SDL_sound and dependent libraries") |
| ENDIF(NOT MY_RESULT) |
| |
| SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARIES_TMP}" CACHE INTERNAL "SDL_sound and dependent libraries") |
| ENDIF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) |
| |
| INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) |
| |
| FIND_PACKAGE_HANDLE_STANDARD_ARGS(SDL_SOUND |
| REQUIRED_VARS SDL_SOUND_LIBRARIES SDL_SOUND_INCLUDE_DIR) |
