| # Distributed under the OSI-approved BSD 3-Clause License. See accompanying |
| # file Copyright.txt or https://cmake.org/licensing for details. |
| |
| #[=======================================================================[.rst: |
| FindDoxygen |
| ----------- |
| |
| Doxygen is a documentation generation tool (see http://www.doxygen.org). |
| This module looks for Doxygen and some optional tools it supports. These |
| tools are enabled as components in the :command:`find_package` command: |
| |
| ``dot`` |
| `Graphviz <http://graphviz.org>`_ ``dot`` utility used to render various |
| graphs. |
| ``mscgen`` |
| `Message Chart Generator <http://www.mcternan.me.uk/mscgen/>`_ utility used |
| by Doxygen's ``\msc`` and ``\mscfile`` commands. |
| ``dia`` |
| `Dia <https://wiki.gnome.org/Apps/Dia>`_ the diagram editor used by Doxygen's |
| ``\diafile`` command. |
| |
| Examples: |
| |
| .. code-block:: cmake |
| |
| # Require dot, treat the other components as optional |
| find_package(Doxygen |
| REQUIRED dot |
| OPTIONAL_COMPONENTS mscgen dia) |
| |
| The following variables are defined by this module: |
| |
| .. variable:: DOXYGEN_FOUND |
| |
| True if the ``doxygen`` executable was found. |
| |
| .. variable:: DOXYGEN_VERSION |
| |
| The version reported by ``doxygen --version``. |
| |
| The module defines ``IMPORTED`` targets for Doxygen and each component found. |
| These can be used as part of custom commands, etc. and should be preferred over |
| old-style (and now deprecated) variables like ``DOXYGEN_EXECUTABLE``. The |
| following import targets are defined if their corresponding executable could be |
| found (the component import targets will only be defined if that component was |
| requested): |
| |
| :: |
| |
| Doxygen::doxygen |
| Doxygen::dot |
| Doxygen::mscgen |
| Doxygen::dia |
| |
| |
| Functions |
| ^^^^^^^^^ |
| |
| .. command:: doxygen_add_docs |
| |
| This function is intended as a convenience for adding a target for generating |
| documentation with Doxygen. It aims to provide sensible defaults so that |
| projects can generally just provide the input files and directories and that |
| will be sufficient to give sensible results. The function supports the |
| ability to customize the Doxygen configuration used to build the |
| documentation. |
| |
| :: |
| |
| doxygen_add_docs(targetName |
| [filesOrDirs...] |
| [ALL] |
| [USE_STAMP_FILE] |
| [WORKING_DIRECTORY dir] |
| [COMMENT comment]) |
| |
| The function constructs a ``Doxyfile`` and defines a custom target that runs |
| Doxygen on that generated file. The listed files and directories are used as |
| the ``INPUT`` of the generated ``Doxyfile`` and they can contain wildcards. |
| Any files that are listed explicitly will also be added as ``SOURCES`` of the |
| custom target so they will show up in an IDE project's source list. |
| |
| So that relative input paths work as expected, by default the working |
| directory of the Doxygen command will be the current source directory (i.e. |
| :variable:`CMAKE_CURRENT_SOURCE_DIR`). This can be overridden with the |
| ``WORKING_DIRECTORY`` option to change the directory used as the relative |
| base point. Note also that Doxygen's default behavior is to strip the working |
| directory from relative paths in the generated documentation (see the |
| ``STRIP_FROM_PATH`` `Doxygen config option |
| <http://www.doxygen.org/manual/config.html>`_ for details). |
| |
| If provided, the optional ``comment`` will be passed as the ``COMMENT`` for |
| the :command:`add_custom_target` command used to create the custom target |
| internally. |
| |
| If ``ALL`` is set, the target will be added to the default build target. |
| |
| If ``USE_STAMP_FILE`` is set, the custom command defined by this function will |
| create a stamp file with the name ``<targetName>.stamp`` in the current |
| binary directory whenever doxygen is re-run. With this option present, all |
| items in ``<filesOrDirs>`` must be files (i.e. no directories, symlinks or |
| wildcards) and each of the files must exist at the time |
| ``doxygen_add_docs()`` is called. An error will be raised if any of the |
| items listed is missing or is not a file when ``USE_STAMP_FILE`` is given. |
| A dependency will be created on each of the files so that doxygen will only |
| be re-run if one of the files is updated. Without the ``USE_STAMP_FILE`` |
| option, doxygen will always be re-run if the ``<targetName>`` target is built |
| regardless of whether anything listed in ``<filesOrDirs>`` has changed. |
| |
| The contents of the generated ``Doxyfile`` can be customized by setting CMake |
| variables before calling ``doxygen_add_docs()``. Any variable with a name of |
| the form ``DOXYGEN_<tag>`` will have its value substituted for the |
| corresponding ``<tag>`` configuration option in the ``Doxyfile``. See the |
| `Doxygen documentation <http://www.doxygen.org/manual/config.html>`_ for the |
| full list of supported configuration options. |
| |
| Some of Doxygen's defaults are overridden to provide more appropriate |
| behavior for a CMake project. Each of the following will be explicitly set |
| unless the variable already has a value before ``doxygen_add_docs()`` is |
| called (with some exceptions noted): |
| |
| .. variable:: DOXYGEN_HAVE_DOT |
| |
| Set to ``YES`` if the ``dot`` component was requested and it was found, |
| ``NO`` otherwise. Any existing value of ``DOXYGEN_HAVE_DOT`` is ignored. |
| |
| .. variable:: DOXYGEN_DOT_MULTI_TARGETS |
| |
| Set to ``YES`` by this module (note that this requires a ``dot`` version |
| newer than 1.8.10). This option is only meaningful if ``DOXYGEN_HAVE_DOT`` |
| is also set to ``YES``. |
| |
| .. variable:: DOXYGEN_GENERATE_LATEX |
| |
| Set to ``NO`` by this module. |
| |
| .. variable:: DOXYGEN_WARN_FORMAT |
| |
| For Visual Studio based generators, this is set to the form recognized by |
| the Visual Studio IDE: ``$file($line) : $text``. For all other generators, |
| Doxygen's default value is not overridden. |
| |
| .. variable:: DOXYGEN_PROJECT_NAME |
| |
| Populated with the name of the current project (i.e. |
| :variable:`PROJECT_NAME`). |
| |
| .. variable:: DOXYGEN_PROJECT_NUMBER |
| |
| Populated with the version of the current project (i.e. |
| :variable:`PROJECT_VERSION`). |
| |
| .. variable:: DOXYGEN_PROJECT_BRIEF |
| |
| Populated with the description of the current project (i.e. |
| :variable:`PROJECT_DESCRIPTION`). |
| |
| .. variable:: DOXYGEN_INPUT |
| |
| Projects should not set this variable. It will be populated with the set of |
| files and directories passed to ``doxygen_add_docs()``, thereby providing |
| consistent behavior with the other built-in commands like |
| :command:`add_executable`, :command:`add_library` and |
| :command:`add_custom_target`. If a variable named ``DOXYGEN_INPUT`` is set |
| by the project, it will be ignored and a warning will be issued. |
| |
| .. variable:: DOXYGEN_RECURSIVE |
| |
| Set to ``YES`` by this module. |
| |
| .. variable:: DOXYGEN_EXCLUDE_PATTERNS |
| |
| If the set of inputs includes directories, this variable will specify |
| patterns used to exclude files from them. The following patterns are added |
| by ``doxygen_add_docs()`` to ensure CMake-specific files and directories |
| are not included in the input. If the project sets |
| ``DOXYGEN_EXCLUDE_PATTERNS``, those contents are merged with these |
| additional patterns rather than replacing them: |
| |
| :: |
| |
| */.git/* |
| */.svn/* |
| */.hg/* |
| */CMakeFiles/* |
| */_CPack_Packages/* |
| DartConfiguration.tcl |
| CMakeLists.txt |
| CMakeCache.txt |
| |
| .. variable:: DOXYGEN_OUTPUT_DIRECTORY |
| |
| Set to :variable:`CMAKE_CURRENT_BINARY_DIR` by this module. Note that if |
| the project provides its own value for this and it is a relative path, it |
| will be converted to an absolute path relative to the current binary |
| directory. This is necessary because doxygen will normally be run from a |
| directory within the source tree so that relative source paths work as |
| expected. If this directory does not exist, it will be recursively created |
| prior to executing the doxygen commands. |
| |
| To change any of these defaults or override any other Doxygen config option, |
| set relevant variables before calling ``doxygen_add_docs()``. For example: |
| |
| .. code-block:: cmake |
| |
| set(DOXYGEN_GENERATE_HTML NO) |
| set(DOXYGEN_GENERATE_MAN YES) |
| |
| doxygen_add_docs( |
| doxygen |
| ${PROJECT_SOURCE_DIR} |
| COMMENT "Generate man pages" |
| ) |
| |
| A number of Doxygen config options accept lists of values, but Doxygen requires |
| them to be separated by whitespace. CMake variables hold lists as a string with |
| items separated by semi-colons, so a conversion needs to be performed. The |
| ``doxygen_add_docs()`` command specifically checks the following Doxygen config |
| options and will convert their associated CMake variable's contents into the |
| required form if set. |
| |
| :: |
| |
| ABBREVIATE_BRIEF |
| ALIASES |
| CITE_BIB_FILES |
| DIAFILE_DIRS |
| DOTFILE_DIRS |
| DOT_FONTPATH |
| ENABLED_SECTIONS |
| EXAMPLE_PATH |
| EXAMPLE_PATTERNS |
| EXCLUDE |
| EXCLUDE_PATTERNS |
| EXCLUDE_SYMBOLS |
| EXPAND_AS_DEFINED |
| EXTENSION_MAPPING |
| EXTRA_PACKAGES |
| EXTRA_SEARCH_MAPPINGS |
| FILE_PATTERNS |
| FILTER_PATTERNS |
| FILTER_SOURCE_PATTERNS |
| HTML_EXTRA_FILES |
| HTML_EXTRA_STYLESHEET |
| IGNORE_PREFIX |
| IMAGE_PATH |
| INCLUDE_FILE_PATTERNS |
| INCLUDE_PATH |
| INPUT |
| LATEX_EXTRA_FILES |
| LATEX_EXTRA_STYLESHEET |
| MATHJAX_EXTENSIONS |
| MSCFILE_DIRS |
| PLANTUML_INCLUDE_PATH |
| PREDEFINED |
| QHP_CUST_FILTER_ATTRS |
| QHP_SECT_FILTER_ATTRS |
| STRIP_FROM_INC_PATH |
| STRIP_FROM_PATH |
| TAGFILES |
| TCL_SUBST |
| |
| The following single value Doxygen options will be quoted automatically |
| if they contain at least one space: |
| |
| :: |
| |
| CHM_FILE |
| DIA_PATH |
| DOCBOOK_OUTPUT |
| DOCSET_FEEDNAME |
| DOCSET_PUBLISHER_NAME |
| DOT_FONTNAME |
| DOT_PATH |
| EXTERNAL_SEARCH_ID |
| FILE_VERSION_FILTER |
| GENERATE_TAGFILE |
| HHC_LOCATION |
| HTML_FOOTER |
| HTML_HEADER |
| HTML_OUTPUT |
| HTML_STYLESHEET |
| INPUT_FILTER |
| LATEX_FOOTER |
| LATEX_HEADER |
| LATEX_OUTPUT |
| LAYOUT_FILE |
| MAN_OUTPUT |
| MAN_SUBDIR |
| MATHJAX_CODEFILE |
| MSCGEN_PATH |
| OUTPUT_DIRECTORY |
| PERL_PATH |
| PLANTUML_JAR_PATH |
| PROJECT_BRIEF |
| PROJECT_LOGO |
| PROJECT_NAME |
| QCH_FILE |
| QHG_LOCATION |
| QHP_CUST_FILTER_NAME |
| QHP_VIRTUAL_FOLDER |
| RTF_EXTENSIONS_FILE |
| RTF_OUTPUT |
| RTF_STYLESHEET_FILE |
| SEARCHDATA_FILE |
| USE_MDFILE_AS_MAINPAGE |
| WARN_FORMAT |
| WARN_LOGFILE |
| XML_OUTPUT |
| |
| There are situations where it may be undesirable for a particular config option |
| to be automatically quoted by ``doxygen_add_docs()``, such as ``ALIASES`` which |
| may need to include its own embedded quoting. The ``DOXYGEN_VERBATIM_VARS`` |
| variable can be used to specify a list of Doxygen variables (including the |
| leading ``DOXYGEN_`` prefix) which should not be quoted. The project is then |
| responsible for ensuring that those variables' values make sense when placed |
| directly in the Doxygen input file. In the case of list variables, list items |
| are still separated by spaces, it is only the automatic quoting that is |
| skipped. For example, the following allows ``doxygen_add_docs()`` to apply |
| quoting to ``DOXYGEN_PROJECT_BRIEF``, but not each item in the |
| ``DOXYGEN_ALIASES`` list (:ref:`bracket syntax <Bracket Argument>` can also |
| be used to make working with embedded quotes easier): |
| |
| .. code-block:: cmake |
| |
| set(DOXYGEN_PROJECT_BRIEF "String with spaces") |
| set(DOXYGEN_ALIASES |
| [[somealias="@some_command param"]] |
| "anotherAlias=@foobar" |
| ) |
| set(DOXYGEN_VERBATIM_VARS DOXYGEN_ALIASES) |
| |
| The resultant ``Doxyfile`` will contain the following lines: |
| |
| .. code-block:: text |
| |
| PROJECT_BRIEF = "String with spaces" |
| ALIASES = somealias="@some_command param" anotherAlias=@foobar |
| |
| |
| Deprecated Result Variables |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| For compatibility with previous versions of CMake, the following variables |
| are also defined but they are deprecated and should no longer be used: |
| |
| .. variable:: DOXYGEN_EXECUTABLE |
| |
| The path to the ``doxygen`` command. If projects need to refer to the |
| ``doxygen`` executable directly, they should use the ``Doxygen::doxygen`` |
| import target instead. |
| |
| .. variable:: DOXYGEN_DOT_FOUND |
| |
| True if the ``dot`` executable was found. |
| |
| .. variable:: DOXYGEN_DOT_EXECUTABLE |
| |
| The path to the ``dot`` command. If projects need to refer to the ``dot`` |
| executable directly, they should use the ``Doxygen::dot`` import target |
| instead. |
| |
| .. variable:: DOXYGEN_DOT_PATH |
| |
| The path to the directory containing the ``dot`` executable as reported in |
| ``DOXYGEN_DOT_EXECUTABLE``. The path may have forward slashes even on Windows |
| and is not suitable for direct substitution into a ``Doxyfile.in`` template. |
| If you need this value, get the :prop_tgt:`IMPORTED_LOCATION` property of the |
| ``Doxygen::dot`` target and use :command:`get_filename_component` to extract |
| the directory part of that path. You may also want to consider using |
| :command:`file(TO_NATIVE_PATH)` to prepare the path for a Doxygen |
| configuration file. |
| |
| |
| Deprecated Hint Variables |
| ^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| .. variable:: DOXYGEN_SKIP_DOT |
| |
| This variable has no effect for the component form of ``find_package``. |
| In backward compatibility mode (i.e. without components list) it prevents |
| the finder module from searching for Graphviz's ``dot`` utility. |
| |
| #]=======================================================================] |
| |
| cmake_policy(PUSH) |
| cmake_policy(SET CMP0057 NEW) # if IN_LIST |
| |
| # For backwards compatibility support |
| if(Doxygen_FIND_QUIETLY) |
| set(DOXYGEN_FIND_QUIETLY TRUE) |
| endif() |
| |
| # ===== Rationale for OS X AppBundle mods below ===== |
| # With the OS X GUI version, Doxygen likes to be installed to /Applications |
| # and it contains the doxygen executable in the bundle. In the versions I've |
| # seen, it is located in Resources, but in general, more often binaries are |
| # located in MacOS. |
| # |
| # NOTE: The official Doxygen.app distributed for OS X uses non-standard |
| # conventions. Instead of the command-line "doxygen" tool being placed in |
| # Doxygen.app/Contents/MacOS, "Doxywizard" is placed there instead and |
| # "doxygen" is placed in Contents/Resources. This is most likely done |
| # so that something happens when people double-click on the Doxygen.app |
| # package. Unfortunately, CMake gets confused by this as when it sees the |
| # bundle it uses "Doxywizard" as the executable to use instead of |
| # "doxygen". Therefore to work-around this issue we temporarily disable |
| # the app-bundle feature, just for this CMake module: |
| # |
| if(APPLE) |
| # Save the old setting |
| set(TEMP_DOXYGEN_SAVE_CMAKE_FIND_APPBUNDLE ${CMAKE_FIND_APPBUNDLE}) |
| # Disable the App-bundle detection feature |
| set(CMAKE_FIND_APPBUNDLE "NEVER") |
| endif() |
| # FYI: |
| # In older versions of OS X Doxygen, dot was included with the Doxygen bundle, |
| # but newer versions require you to download Graphviz.app which contains "dot" |
| # or use something like homebrew. |
| # ============== End OSX stuff ================ |
| |
| # |
| # Find Doxygen... |
| # |
| macro(_Doxygen_find_doxygen) |
| find_program( |
| DOXYGEN_EXECUTABLE |
| NAMES doxygen |
| PATHS |
| "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\doxygen_is1;Inno Setup: App Path]/bin" |
| /Applications/Doxygen.app/Contents/Resources |
| /Applications/Doxygen.app/Contents/MacOS |
| /Applications/Utilities/Doxygen.app/Contents/Resources |
| /Applications/Utilities/Doxygen.app/Contents/MacOS |
| DOC "Doxygen documentation generation tool (http://www.doxygen.org)" |
| ) |
| mark_as_advanced(DOXYGEN_EXECUTABLE) |
| |
| if(DOXYGEN_EXECUTABLE) |
| execute_process( |
| COMMAND "${DOXYGEN_EXECUTABLE}" --version |
| OUTPUT_VARIABLE DOXYGEN_VERSION |
| OUTPUT_STRIP_TRAILING_WHITESPACE |
| RESULT_VARIABLE _Doxygen_version_result |
| ) |
| if(_Doxygen_version_result) |
| message(WARNING "Unable to determine doxygen version: ${_Doxygen_version_result}") |
| endif() |
| |
| # Create an imported target for Doxygen |
| if(NOT TARGET Doxygen::doxygen) |
| add_executable(Doxygen::doxygen IMPORTED GLOBAL) |
| set_target_properties(Doxygen::doxygen PROPERTIES |
| IMPORTED_LOCATION "${DOXYGEN_EXECUTABLE}" |
| ) |
| endif() |
| endif() |
| endmacro() |
| |
| # |
| # Find Diagram Editor... |
| # |
| macro(_Doxygen_find_dia) |
| set(_x86 "(x86)") |
| find_program( |
| DOXYGEN_DIA_EXECUTABLE |
| NAMES dia |
| PATHS |
| "$ENV{ProgramFiles}/Dia" |
| "$ENV{ProgramFiles${_x86}}/Dia" |
| DOC "Diagram Editor tool for use with Doxygen" |
| ) |
| mark_as_advanced(DOXYGEN_DIA_EXECUTABLE) |
| |
| if(DOXYGEN_DIA_EXECUTABLE) |
| # The Doxyfile wants the path to the utility, not the entire path |
| # including file name |
| get_filename_component(DOXYGEN_DIA_PATH |
| "${DOXYGEN_DIA_EXECUTABLE}" |
| DIRECTORY) |
| if(WIN32) |
| file(TO_NATIVE_PATH "${DOXYGEN_DIA_PATH}" DOXYGEN_DIA_PATH) |
| endif() |
| |
| # Create an imported target for component |
| if(NOT TARGET Doxygen::dia) |
| add_executable(Doxygen::dia IMPORTED GLOBAL) |
| set_target_properties(Doxygen::dia PROPERTIES |
| IMPORTED_LOCATION "${DOXYGEN_DIA_EXECUTABLE}" |
| ) |
| endif() |
| endif() |
| |
| unset(_x86) |
| endmacro() |
| |
| # |
| # Find Graphviz Dot... |
| # |
| macro(_Doxygen_find_dot) |
| if(WIN32) |
| set(_x86 "(x86)") |
| file( |
| GLOB _Doxygen_GRAPHVIZ_BIN_DIRS |
| "$ENV{ProgramFiles}/Graphviz*/bin" |
| "$ENV{ProgramFiles${_x86}}/Graphviz*/bin" |
| ) |
| unset(_x86) |
| else() |
| set(_Doxygen_GRAPHVIZ_BIN_DIRS "") |
| endif() |
| |
| find_program( |
| DOXYGEN_DOT_EXECUTABLE |
| NAMES dot |
| PATHS |
| ${_Doxygen_GRAPHVIZ_BIN_DIRS} |
| "$ENV{ProgramFiles}/ATT/Graphviz/bin" |
| "C:/Program Files/ATT/Graphviz/bin" |
| [HKEY_LOCAL_MACHINE\\SOFTWARE\\ATT\\Graphviz;InstallPath]/bin |
| /Applications/Graphviz.app/Contents/MacOS |
| /Applications/Utilities/Graphviz.app/Contents/MacOS |
| /Applications/Doxygen.app/Contents/Resources |
| /Applications/Doxygen.app/Contents/MacOS |
| /Applications/Utilities/Doxygen.app/Contents/Resources |
| /Applications/Utilities/Doxygen.app/Contents/MacOS |
| DOC "Dot tool for use with Doxygen" |
| ) |
| mark_as_advanced(DOXYGEN_DOT_EXECUTABLE) |
| |
| if(DOXYGEN_DOT_EXECUTABLE) |
| # The Doxyfile wants the path to the utility, not the entire path |
| # including file name |
| get_filename_component(DOXYGEN_DOT_PATH |
| "${DOXYGEN_DOT_EXECUTABLE}" |
| DIRECTORY) |
| if(WIN32) |
| file(TO_NATIVE_PATH "${DOXYGEN_DOT_PATH}" DOXYGEN_DOT_PATH) |
| endif() |
| |
| # Create an imported target for component |
| if(NOT TARGET Doxygen::dot) |
| add_executable(Doxygen::dot IMPORTED GLOBAL) |
| set_target_properties(Doxygen::dot PROPERTIES |
| IMPORTED_LOCATION "${DOXYGEN_DOT_EXECUTABLE}" |
| ) |
| endif() |
| endif() |
| |
| unset(_Doxygen_GRAPHVIZ_BIN_DIRS) |
| endmacro() |
| |
| # |
| # Find Message Sequence Chart... |
| # |
| macro(_Doxygen_find_mscgen) |
| set(_x86 "(x86)") |
| find_program( |
| DOXYGEN_MSCGEN_EXECUTABLE |
| NAMES mscgen |
| PATHS |
| "$ENV{ProgramFiles}/Mscgen" |
| "$ENV{ProgramFiles${_x86}}/Mscgen" |
| DOC "Message sequence chart tool for use with Doxygen" |
| ) |
| mark_as_advanced(DOXYGEN_MSCGEN_EXECUTABLE) |
| |
| if(DOXYGEN_MSCGEN_EXECUTABLE) |
| # The Doxyfile wants the path to the utility, not the entire path |
| # including file name |
| get_filename_component(DOXYGEN_MSCGEN_PATH |
| "${DOXYGEN_MSCGEN_EXECUTABLE}" |
| DIRECTORY) |
| if(WIN32) |
| file(TO_NATIVE_PATH "${DOXYGEN_MSCGEN_PATH}" DOXYGEN_MSCGEN_PATH) |
| endif() |
| |
| # Create an imported target for component |
| if(NOT TARGET Doxygen::mscgen) |
| add_executable(Doxygen::mscgen IMPORTED GLOBAL) |
| set_target_properties(Doxygen::mscgen PROPERTIES |
| IMPORTED_LOCATION "${DOXYGEN_MSCGEN_EXECUTABLE}" |
| ) |
| endif() |
| endif() |
| |
| unset(_x86) |
| endmacro() |
| |
| # Make sure `doxygen` is one of the components to find |
| set(_Doxygen_keep_backward_compat FALSE) |
| if(NOT Doxygen_FIND_COMPONENTS) |
| # Search at least for `doxygen` executable |
| set(Doxygen_FIND_COMPONENTS doxygen) |
| # Preserve backward compatibility: |
| # search for `dot` also if `DOXYGEN_SKIP_DOT` is not explicitly disable this. |
| if(NOT DOXYGEN_SKIP_DOT) |
| list(APPEND Doxygen_FIND_COMPONENTS dot) |
| endif() |
| set(_Doxygen_keep_backward_compat TRUE) |
| elseif(NOT doxygen IN_LIST Doxygen_FIND_COMPONENTS) |
| list(INSERT Doxygen_FIND_COMPONENTS 0 doxygen) |
| endif() |
| |
| # |
| # Find all requested components of Doxygen... |
| # |
| foreach(_comp IN LISTS Doxygen_FIND_COMPONENTS) |
| if(_comp STREQUAL "doxygen") |
| _Doxygen_find_doxygen() |
| elseif(_comp STREQUAL "dia") |
| _Doxygen_find_dia() |
| elseif(_comp STREQUAL "dot") |
| _Doxygen_find_dot() |
| elseif(_comp STREQUAL "mscgen") |
| _Doxygen_find_mscgen() |
| else() |
| message(WARNING "${_comp} is not a valid Doxygen component") |
| set(Doxygen_${_comp}_FOUND FALSE) |
| continue() |
| endif() |
| |
| if(TARGET Doxygen::${_comp}) |
| set(Doxygen_${_comp}_FOUND TRUE) |
| else() |
| set(Doxygen_${_comp}_FOUND FALSE) |
| endif() |
| endforeach() |
| unset(_comp) |
| |
| # Verify find results |
| include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) |
| find_package_handle_standard_args( |
| Doxygen |
| REQUIRED_VARS DOXYGEN_EXECUTABLE |
| VERSION_VAR DOXYGEN_VERSION |
| HANDLE_COMPONENTS |
| ) |
| |
| # |
| # Backwards compatibility... |
| # |
| if(APPLE) |
| # Restore the old app-bundle setting |
| set(CMAKE_FIND_APPBUNDLE ${TEMP_DOXYGEN_SAVE_CMAKE_FIND_APPBUNDLE}) |
| endif() |
| |
| # Maintain the _FOUND variables as "YES" or "NO" for backwards |
| # compatibility. This allows people to substitute them directly into |
| # Doxyfile with configure_file(). |
| if(DOXYGEN_FOUND) |
| set(DOXYGEN_FOUND "YES") |
| else() |
| set(DOXYGEN_FOUND "NO") |
| endif() |
| if(_Doxygen_keep_backward_compat) |
| if(Doxygen_dot_FOUND) |
| set(DOXYGEN_DOT_FOUND "YES") |
| else() |
| set(DOXYGEN_DOT_FOUND "NO") |
| endif() |
| |
| # For backwards compatibility support for even older CMake versions |
| set(DOXYGEN ${DOXYGEN_EXECUTABLE}) |
| set(DOT ${DOXYGEN_DOT_EXECUTABLE}) |
| |
| # No need to keep any backward compatibility for `DOXYGEN_MSCGEN_XXX` |
| # and `DOXYGEN_DIA_XXX` since they were not supported before component |
| # support was added |
| endif() |
| unset(_Doxygen_keep_backward_compat) |
| |
| # |
| # Allow full control of Doxygen from CMakeLists.txt |
| # |
| |
| # Prepare a template Doxyfile and Doxygen's default values CMake file |
| if(TARGET Doxygen::doxygen) |
| # If doxygen was found, use it to generate a minimal default Doxyfile. |
| # We will delete this file after we have finished using it below to |
| # generate the other files that doxygen_add_docs() will use. |
| set(_Doxygen_tpl "${CMAKE_BINARY_DIR}/CMakeDoxyfile.tpl") |
| execute_process( |
| COMMAND "${DOXYGEN_EXECUTABLE}" -s -g "${_Doxygen_tpl}" |
| OUTPUT_QUIET |
| RESULT_VARIABLE _Doxygen_tpl_result |
| ) |
| if(_Doxygen_tpl_result) |
| message(FATAL_ERROR |
| "Unable to generate Doxyfile template: ${_Doxygen_tpl_result}") |
| elseif(NOT EXISTS "${_Doxygen_tpl}") |
| message(FATAL_ERROR |
| "Doxygen has failed to generate a Doxyfile template") |
| endif() |
| |
| # Write a do-not-edit header to files we are going to generate... |
| set(_Doxygen_dne_header |
| [[ |
| # |
| # DO NOT EDIT! THIS FILE WAS GENERATED BY CMAKE! |
| # |
| |
| ]] |
| ) |
| # We only need one copy of these across the whole build, since their |
| # content is only dependent on the version of Doxygen being used. Therefore |
| # we always put them at the top of the build tree so that they are in a |
| # predictable location. |
| set(_doxyfile_in "${CMAKE_BINARY_DIR}/CMakeDoxyfile.in") |
| set(_doxyfile_defaults "${CMAKE_BINARY_DIR}/CMakeDoxygenDefaults.cmake") |
| |
| file(WRITE "${_doxyfile_in}" ${_Doxygen_dne_header}) |
| file(WRITE "${_doxyfile_defaults}" ${_Doxygen_dne_header}) |
| |
| # Get strings containing a configuration key from the template Doxyfile |
| # we obtained from this version of Doxygen. Because some options are split |
| # across multiple lines by ending lines with backslashes, we cannot just |
| # use file(STRINGS...) with a REGEX. Instead, read lines without a REGEX |
| # so that file(STRINGS...) handles the trailing backslash as a line |
| # continuation. It stores multi-lines as lists, so we then have to replace |
| # the ";" list separator with backslashed newlines again so that we get the |
| # original content stored back as the value part. |
| file(STRINGS "${_Doxygen_tpl}" _file_lines) |
| unset(_Doxygen_tpl_params) |
| foreach(_line IN LISTS _file_lines) |
| if(_line MATCHES "([A-Z][A-Z0-9_]+)( *=)(.*)") |
| set(_key "${CMAKE_MATCH_1}") |
| set(_eql "${CMAKE_MATCH_2}") |
| set(_value "${CMAKE_MATCH_3}") |
| string(REPLACE "\\" "\\\\" _value "${_value}") |
| string(REPLACE ";" "\\\n" _value "${_value}") |
| list(APPEND _Doxygen_tpl_params "${_key}${_eql}${_value}") |
| endif() |
| endforeach() |
| |
| # Build up a Doxyfile that provides @configVar@ substitutions for each |
| # Doxygen config option as well as a separate CMake script which provides |
| # the default value for each of those options if the project doesn't supply |
| # them. Each config option will support substitution of a CMake variable |
| # of the same name except with DOXYGEN_ prepended. |
| foreach(_Doxygen_param IN LISTS _Doxygen_tpl_params) |
| if(_Doxygen_param MATCHES "([A-Z][A-Z0-9_]+)( *)=( (.*))?") |
| # Ok, this is a config key with a value |
| if(CMAKE_MATCH_COUNT EQUAL 4) |
| file(APPEND "${_doxyfile_in}" |
| "${CMAKE_MATCH_1}${CMAKE_MATCH_2}= @DOXYGEN_${CMAKE_MATCH_1}@\n") |
| # Remove the backslashes we had to preserve to handle newlines |
| string(REPLACE "\\\n" "\n" _value "${CMAKE_MATCH_4}") |
| file(APPEND "${_doxyfile_defaults}" |
| "if(NOT DEFINED DOXYGEN_${CMAKE_MATCH_1}) |
| set(DOXYGEN_${CMAKE_MATCH_1} ${_value}) |
| endif() |
| ") |
| # Ok, this is a config key with empty default value |
| elseif(CMAKE_MATCH_COUNT EQUAL 2) |
| file(APPEND "${_doxyfile_in}" |
| "${CMAKE_MATCH_1}${CMAKE_MATCH_2}= @DOXYGEN_${CMAKE_MATCH_1}@\n") |
| else() |
| message(AUTHOR_WARNING |
| "Unexpected line format! Code review required!\nFault line: ${_Doxygen_param}") |
| endif() |
| else() |
| message(AUTHOR_WARNING |
| "Unexpected line format! Code review required!\nFault line: ${_Doxygen_param}") |
| endif() |
| endforeach() |
| |
| # Ok, dumped defaults are not needed anymore... |
| file(REMOVE "${_Doxygen_tpl}") |
| |
| unset(_Doxygen_param) |
| unset(_Doxygen_tpl_params) |
| unset(_Doxygen_dne_header) |
| unset(_Doxygen_tpl) |
| |
| endif() |
| |
| function(doxygen_quote_value VARIABLE) |
| # Quote a value of the given variable if: |
| # - VARIABLE parameter was really given |
| # - the variable it names is defined and is not present in the list |
| # specified by DOXYGEN_VERBATIM_VARS (if set) |
| # - the value of the named variable isn't already quoted |
| # - the value has spaces |
| if(VARIABLE AND DEFINED ${VARIABLE} AND |
| NOT ${VARIABLE} MATCHES "^\".* .*\"$" AND ${VARIABLE} MATCHES " " AND |
| NOT (DEFINED DOXYGEN_VERBATIM_VARS AND |
| "${VARIABLE}" IN_LIST DOXYGEN_VERBATIM_VARS)) |
| set(${VARIABLE} "\"${${VARIABLE}}\"" PARENT_SCOPE) |
| endif() |
| endfunction() |
| |
| function(doxygen_list_to_quoted_strings LIST_VARIABLE) |
| if(LIST_VARIABLE AND DEFINED ${LIST_VARIABLE}) |
| unset(_inputs) |
| unset(_sep) |
| unset(_verbatim) |
| # Have to test if list items should be treated as verbatim here |
| # because we lose the variable name when we pass just one list item |
| # to doxygen_quote_value() below |
| if(DEFINED DOXYGEN_VERBATIM_VARS AND |
| "${LIST_VARIABLE}" IN_LIST DOXYGEN_VERBATIM_VARS) |
| set(_verbatim True) |
| endif() |
| foreach(_in IN LISTS ${LIST_VARIABLE}) |
| if(NOT _verbatim) |
| doxygen_quote_value(_in) |
| endif() |
| string(APPEND _inputs "${_sep}${_in}") |
| set(_sep " ") |
| endforeach() |
| set(${LIST_VARIABLE} "${_inputs}" PARENT_SCOPE) |
| endif() |
| endfunction() |
| |
| function(doxygen_add_docs targetName) |
| set(_options ALL USE_STAMP_FILE) |
| set(_one_value_args WORKING_DIRECTORY COMMENT) |
| set(_multi_value_args) |
| cmake_parse_arguments(_args |
| "${_options}" |
| "${_one_value_args}" |
| "${_multi_value_args}" |
| ${ARGN}) |
| |
| if(NOT _args_COMMENT) |
| set(_args_COMMENT "Generate API documentation for ${targetName}") |
| endif() |
| |
| if(NOT _args_WORKING_DIRECTORY) |
| set(_args_WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}") |
| endif() |
| |
| if(DEFINED DOXYGEN_INPUT) |
| message(WARNING |
| "DOXYGEN_INPUT is set but it will be ignored. Pass the files and directories \ |
| directly to the doxygen_add_docs() command instead.") |
| endif() |
| set(DOXYGEN_INPUT ${_args_UNPARSED_ARGUMENTS}) |
| |
| if(NOT TARGET Doxygen::doxygen) |
| message(FATAL_ERROR "Doxygen was not found, needed by \ |
| doxygen_add_docs() for target ${targetName}") |
| endif() |
| |
| # If not already defined, set some relevant defaults based on the |
| # assumption that the documentation is for the whole project. Details |
| # specified in the project() command will be used to populate a number of |
| # these defaults. |
| |
| if(NOT DEFINED DOXYGEN_PROJECT_NAME) |
| # The PROJECT_NAME tag is a single word (or a sequence of words |
| # surrounded by double-quotes, unless you are using Doxywizard) that |
| # should identify the project for which the documentation is generated. |
| # This name is used in the title of most generated pages and in a few |
| # other places. The default value is: My Project. |
| set(DOXYGEN_PROJECT_NAME ${PROJECT_NAME}) |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_PROJECT_NUMBER) |
| # The PROJECT_NUMBER tag can be used to enter a project or revision |
| # number. This could be handy for archiving the generated documentation |
| # or if some version control system is used. |
| set(DOXYGEN_PROJECT_NUMBER ${PROJECT_VERSION}) |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_PROJECT_BRIEF) |
| # Using the PROJECT_BRIEF tag one can provide an optional one line |
| # description for a project that appears at the top of each page and |
| # should give viewer a quick idea about the purpose of the project. |
| # Keep the description short. |
| set(DOXYGEN_PROJECT_BRIEF "${PROJECT_DESCRIPTION}") |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_RECURSIVE) |
| # The RECURSIVE tag can be used to specify whether or not |
| # subdirectories should be searched for input files as well. CMake |
| # projects generally evolve to span multiple directories, so it makes |
| # more sense for this to be on by default. Doxygen's default value |
| # has this setting turned off, so we override it. |
| set(DOXYGEN_RECURSIVE YES) |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_OUTPUT_DIRECTORY) |
| # The OUTPUT_DIRECTORY tag is used to specify the (relative or |
| # absolute) path into which the generated documentation will be |
| # written. If a relative path is used, Doxygen will interpret it as |
| # being relative to the location where doxygen was started, but we need |
| # to run Doxygen in the source tree so that relative input paths work |
| # intuitively. Therefore, we ensure that the output directory is always |
| # an absolute path and if the project provided a relative path, we |
| # treat it as relative to the current BINARY directory so that output |
| # is not generated inside the source tree. |
| set(DOXYGEN_OUTPUT_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}") |
| elseif(NOT IS_ABSOLUTE "${DOXYGEN_OUTPUT_DIRECTORY}") |
| get_filename_component(DOXYGEN_OUTPUT_DIRECTORY |
| "${DOXYGEN_OUTPUT_DIRECTORY}" |
| ABSOLUTE |
| BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}") |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_HAVE_DOT) |
| # If you set the HAVE_DOT tag to YES then doxygen will assume the dot |
| # tool is available from the path. This tool is part of Graphviz (see: |
| # http://www.graphviz.org/), a graph visualization toolkit from AT&T |
| # and Lucent Bell Labs. The other options in this section have no |
| # effect if this option is set to NO. |
| # Doxygen's default value is: NO. |
| if(Doxygen_dot_FOUND) |
| set(DOXYGEN_HAVE_DOT "YES") |
| else() |
| set(DOXYGEN_HAVE_DOT "NO") |
| endif() |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_DOT_MULTI_TARGETS) |
| # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate |
| # multiple output files in one run (i.e. multiple -o and -T options on |
| # the command line). This makes dot run faster, but since only newer |
| # versions of dot (>1.8.10) support this, Doxygen disables this feature |
| # by default. |
| # This tag requires that the tag HAVE_DOT is set to YES. |
| set(DOXYGEN_DOT_MULTI_TARGETS YES) |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_GENERATE_LATEX) |
| # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX |
| # output. We only want the HTML output enabled by default, so we turn |
| # this off if the project hasn't specified it. |
| set(DOXYGEN_GENERATE_LATEX NO) |
| endif() |
| |
| if(NOT DEFINED DOXYGEN_WARN_FORMAT) |
| if(CMAKE_VS_MSBUILD_COMMAND OR CMAKE_VS_DEVENV_COMMAND) |
| # The WARN_FORMAT tag determines the format of the warning messages |
| # that doxygen can produce. The string should contain the $file, |
| # $line and $text tags, which will be replaced by the file and line |
| # number from which the warning originated and the warning text. |
| # Optionally, the format may contain $version, which will be |
| # replaced by the version of the file (if it could be obtained via |
| # FILE_VERSION_FILTER). |
| # Doxygen's default value is: $file:$line: $text |
| set(DOXYGEN_WARN_FORMAT "$file($line) : $text ") |
| endif() |
| endif() |
| |
| if(DEFINED DOXYGEN_WARN_LOGFILE AND NOT IS_ABSOLUTE "${DOXYGEN_WARN_LOGFILE}") |
| # The WARN_LOGFILE tag can be used to specify a file to which warning and error |
| # messages should be written. If left blank the output is written to standard |
| # error (stderr). |
| get_filename_component(DOXYGEN_WARN_LOGFILE |
| "${DOXYGEN_WARN_LOGFILE}" |
| ABSOLUTE |
| BASE_DIR "${CMAKE_CURRENT_BINARY_DIR}") |
| endif() |
| |
| # Any files from the INPUT that match any of the EXCLUDE_PATTERNS will be |
| # excluded from the set of input files. We provide some additional patterns |
| # to prevent commonly unwanted things from CMake builds being pulled in. |
| # |
| # Note that the wildcards are matched against the file with absolute path, |
| # so to exclude all test directories for example use the pattern */test/* |
| list( |
| APPEND |
| DOXYGEN_EXCLUDE_PATTERNS |
| "*/.git/*" |
| "*/.svn/*" |
| "*/.hg/*" |
| "*/CMakeFiles/*" |
| "*/_CPack_Packages/*" |
| "DartConfiguration.tcl" |
| "CMakeLists.txt" |
| "CMakeCache.txt" |
| ) |
| |
| # Now bring in Doxgen's defaults for those things the project has not |
| # already set and we have not provided above |
| include("${CMAKE_BINARY_DIR}/CMakeDoxygenDefaults.cmake" OPTIONAL) |
| |
| # Cleanup built HTMLs on "make clean" |
| # TODO Any other dirs? |
| if(DOXYGEN_GENERATE_HTML) |
| if(IS_ABSOLUTE "${DOXYGEN_HTML_OUTPUT}") |
| set(_args_clean_html_dir "${DOXYGEN_HTML_OUTPUT}") |
| else() |
| set(_args_clean_html_dir |
| "${DOXYGEN_OUTPUT_DIRECTORY}/${DOXYGEN_HTML_OUTPUT}") |
| endif() |
| set_property(DIRECTORY APPEND PROPERTY |
| ADDITIONAL_CLEAN_FILES "${_args_clean_html_dir}") |
| endif() |
| |
| # Build up a list of files we can identify from the inputs so we can list |
| # them as DEPENDS and SOURCES in the custom command/target (the latter |
| # makes them display in IDEs). This must be done before we transform the |
| # various DOXYGEN_... variables below because we need to process |
| # DOXYGEN_INPUT as a list first. |
| unset(_sources) |
| foreach(_item IN LISTS DOXYGEN_INPUT) |
| get_filename_component(_abs_item "${_item}" ABSOLUTE |
| BASE_DIR "${_args_WORKING_DIRECTORY}") |
| if(EXISTS "${_abs_item}" AND |
| NOT IS_DIRECTORY "${_abs_item}" AND |
| NOT IS_SYMLINK "${_abs_item}") |
| list(APPEND _sources "${_abs_item}") |
| elseif(_args_USE_STAMP_FILE) |
| message(FATAL_ERROR "Source does not exist or is not a file:\n" |
| " ${_abs_item}\n" |
| "Only existing files may be specified when the " |
| "USE_STAMP_FILE option is given.") |
| endif() |
| endforeach() |
| |
| # Transform known list type options into space separated strings. |
| set(_doxygen_list_options |
| ABBREVIATE_BRIEF |
| ALIASES |
| CITE_BIB_FILES |
| DIAFILE_DIRS |
| DOTFILE_DIRS |
| DOT_FONTPATH |
| ENABLED_SECTIONS |
| EXAMPLE_PATH |
| EXAMPLE_PATTERNS |
| EXCLUDE |
| EXCLUDE_PATTERNS |
| EXCLUDE_SYMBOLS |
| EXPAND_AS_DEFINED |
| EXTENSION_MAPPING |
| EXTRA_PACKAGES |
| EXTRA_SEARCH_MAPPINGS |
| FILE_PATTERNS |
| FILTER_PATTERNS |
| FILTER_SOURCE_PATTERNS |
| HTML_EXTRA_FILES |
| HTML_EXTRA_STYLESHEET |
| IGNORE_PREFIX |
| IMAGE_PATH |
| INCLUDE_FILE_PATTERNS |
| INCLUDE_PATH |
| INPUT |
| LATEX_EXTRA_FILES |
| LATEX_EXTRA_STYLESHEET |
| MATHJAX_EXTENSIONS |
| MSCFILE_DIRS |
| PLANTUML_INCLUDE_PATH |
| PREDEFINED |
| QHP_CUST_FILTER_ATTRS |
| QHP_SECT_FILTER_ATTRS |
| STRIP_FROM_INC_PATH |
| STRIP_FROM_PATH |
| TAGFILES |
| TCL_SUBST |
| ) |
| foreach(_item IN LISTS _doxygen_list_options) |
| doxygen_list_to_quoted_strings(DOXYGEN_${_item}) |
| endforeach() |
| |
| # Transform known single value variables which may contain spaces, such as |
| # paths or description strings. |
| set(_doxygen_quoted_options |
| CHM_FILE |
| DIA_PATH |
| DOCBOOK_OUTPUT |
| DOCSET_FEEDNAME |
| DOCSET_PUBLISHER_NAME |
| DOT_FONTNAME |
| DOT_PATH |
| EXTERNAL_SEARCH_ID |
| FILE_VERSION_FILTER |
| GENERATE_TAGFILE |
| HHC_LOCATION |
| HTML_FOOTER |
| HTML_HEADER |
| HTML_OUTPUT |
| HTML_STYLESHEET |
| INPUT_FILTER |
| LATEX_FOOTER |
| LATEX_HEADER |
| LATEX_OUTPUT |
| LAYOUT_FILE |
| MAN_OUTPUT |
| MAN_SUBDIR |
| MATHJAX_CODEFILE |
| MSCGEN_PATH |
| OUTPUT_DIRECTORY |
| PERL_PATH |
| PLANTUML_JAR_PATH |
| PROJECT_BRIEF |
| PROJECT_LOGO |
| PROJECT_NAME |
| QCH_FILE |
| QHG_LOCATION |
| QHP_CUST_FILTER_NAME |
| QHP_VIRTUAL_FOLDER |
| RTF_EXTENSIONS_FILE |
| RTF_OUTPUT |
| RTF_STYLESHEET_FILE |
| SEARCHDATA_FILE |
| USE_MDFILE_AS_MAINPAGE |
| WARN_FORMAT |
| WARN_LOGFILE |
| XML_OUTPUT |
| ) |
| |
| # Store the unmodified value of DOXYGEN_OUTPUT_DIRECTORY prior to invoking |
| # doxygen_quote_value() below. This will mutate the string specifically for |
| # consumption by Doxygen's config file, which we do not want when we use it |
| # later in the custom target's commands. |
| set( _original_doxygen_output_dir ${DOXYGEN_OUTPUT_DIRECTORY} ) |
| |
| foreach(_item IN LISTS _doxygen_quoted_options) |
| doxygen_quote_value(DOXYGEN_${_item}) |
| endforeach() |
| |
| # Prepare doxygen configuration file |
| set(_doxyfile_template "${CMAKE_BINARY_DIR}/CMakeDoxyfile.in") |
| set(_target_doxyfile "${CMAKE_CURRENT_BINARY_DIR}/Doxyfile.${targetName}") |
| configure_file("${_doxyfile_template}" "${_target_doxyfile}") |
| |
| unset(_all) |
| if(${_args_ALL}) |
| set(_all ALL) |
| endif() |
| |
| # Only create the stamp file if asked to. If we don't create it, |
| # the target will always be considered out-of-date. |
| if(_args_USE_STAMP_FILE) |
| set(__stamp_file "${CMAKE_CURRENT_BINARY_DIR}/${targetName}.stamp") |
| add_custom_command( |
| VERBATIM |
| OUTPUT ${__stamp_file} |
| COMMAND ${CMAKE_COMMAND} -E make_directory ${_original_doxygen_output_dir} |
| COMMAND "${DOXYGEN_EXECUTABLE}" "${_target_doxyfile}" |
| COMMAND ${CMAKE_COMMAND} -E touch ${__stamp_file} |
| WORKING_DIRECTORY "${_args_WORKING_DIRECTORY}" |
| DEPENDS "${_target_doxyfile}" ${_sources} |
| COMMENT "${_args_COMMENT}" |
| ) |
| add_custom_target(${targetName} ${_all} |
| DEPENDS ${__stamp_file} |
| SOURCES ${_sources} |
| ) |
| unset(__stamp_file) |
| else() |
| add_custom_target( ${targetName} ${_all} VERBATIM |
| COMMAND ${CMAKE_COMMAND} -E make_directory ${_original_doxygen_output_dir} |
| COMMAND "${DOXYGEN_EXECUTABLE}" "${_target_doxyfile}" |
| WORKING_DIRECTORY "${_args_WORKING_DIRECTORY}" |
| DEPENDS "${_target_doxyfile}" ${_sources} |
| COMMENT "${_args_COMMENT}" |
| SOURCES ${_sources} |
| ) |
| endif() |
| |
| endfunction() |
| |
| cmake_policy(POP) |
