diff --git a/CHANGES b/CHANGES
index e31b03a..0959ea0 100644
--- a/CHANGES
+++ b/CHANGES
@@ -1,3 +1,16 @@
+ ------------------------------------------------------------------
+ This file is part of bzip2/libbzip2, a program and library for
+ lossless, block-sorting data compression.
+
+ bzip2/libbzip2 version 1.0.4 of 20 December 2006
+ Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+ Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+ README file.
+
+ This program is released under the terms of the license contained
+ in the file LICENSE.
+ ------------------------------------------------------------------
 
 
 0.9.0
@@ -261,7 +274,7 @@
   decompressor to crash, loop or access memory which does not
   belong to it.  If you are using bzip2 or the library to 
   decompress bitstreams from untrusted sources, an upgrade
-  to 1.0.3 is recommended.
+  to 1.0.3 is recommended.  This fixes CAN-2005-1260.
 
 * The documentation has been converted to XML, from which html
   and pdf can be derived.
@@ -273,3 +286,29 @@
 
 * The BZ_NO_STDIO cpp symbol was not properly observed in 1.0.2.
   This has been fixed.
+
+
+1.0.4 (20 Dec 06)
+~~~~~~~~~~~~~~~~~
+Fixes some minor bugs since the last version, 1.0.3.
+
+* Fix file permissions race problem (CAN-2005-0953).
+
+* Avoid possible segfault in BZ2_bzclose.  From Coverity's NetBSD
+  scan.
+
+* 'const'/prototype cleanups in the C code.
+
+* Change default install location to /usr/local, and handle multiple
+  'make install's without error.
+
+* Sanitise file names more carefully in bzgrep.  Fixes CAN-2005-0758
+  to the extent that applies to bzgrep.
+
+* Use 'mktemp' rather than 'tempfile' in bzdiff.
+
+* Tighten up a couple of assertions in blocksort.c following automated
+  analysis.
+
+* Fix minor doc/comment bugs.
+
diff --git a/LICENSE b/LICENSE
index e60845b..4458e35 100644
--- a/LICENSE
+++ b/LICENSE
@@ -1,6 +1,8 @@
 
+--------------------------------------------------------------------------
+
 This program, "bzip2", the associated library "libbzip2", and all
-documentation, are copyright (C) 1996-2005 Julian R Seward.  All
+documentation, are copyright (C) 1996-2006 Julian R Seward.  All
 rights reserved.
 
 Redistribution and use in source and binary forms, with or without
@@ -35,6 +37,7 @@
 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 Julian Seward, Cambridge, UK.
-jseward@acm.org
-bzip2/libbzip2 version 1.0.3 of 15 February 2005
+jseward@bzip.org
+bzip2/libbzip2 version 1.0.4 of 20 December 2006
 
+--------------------------------------------------------------------------
diff --git a/Makefile b/Makefile
index eea329a..c4cbc04 100644
--- a/Makefile
+++ b/Makefile
@@ -1,3 +1,16 @@
+# ------------------------------------------------------------------
+# This file is part of bzip2/libbzip2, a program and library for
+# lossless, block-sorting data compression.
+#
+# bzip2/libbzip2 version 1.0.4 of 20 December 2006
+# Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+#
+# Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+# README file.
+#
+# This program is released under the terms of the license contained
+# in the file LICENSE.
+# ------------------------------------------------------------------
 
 SHELL=/bin/sh
 
@@ -8,10 +21,10 @@
 LDFLAGS=
 
 BIGFILES=-D_FILE_OFFSET_BITS=64
-CFLAGS=-Wall -Winline -O -g $(BIGFILES)
+CFLAGS=-Wall -Winline -O2 -g $(BIGFILES)
 
 # Where you want it installed when you do 'make install'
-PREFIX=/usr
+PREFIX=/usr/local
 
 
 OBJS= blocksort.o  \
@@ -77,14 +90,14 @@
 	cp -f libbz2.a $(PREFIX)/lib
 	chmod a+r $(PREFIX)/lib/libbz2.a
 	cp -f bzgrep $(PREFIX)/bin/bzgrep
-	ln $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzegrep
-	ln $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzfgrep
+	ln -s -f $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzegrep
+	ln -s -f $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzfgrep
 	chmod a+x $(PREFIX)/bin/bzgrep
 	cp -f bzmore $(PREFIX)/bin/bzmore
-	ln $(PREFIX)/bin/bzmore $(PREFIX)/bin/bzless
+	ln -s -f $(PREFIX)/bin/bzmore $(PREFIX)/bin/bzless
 	chmod a+x $(PREFIX)/bin/bzmore
 	cp -f bzdiff $(PREFIX)/bin/bzdiff
-	ln $(PREFIX)/bin/bzdiff $(PREFIX)/bin/bzcmp
+	ln -s -f $(PREFIX)/bin/bzdiff $(PREFIX)/bin/bzcmp
 	chmod a+x $(PREFIX)/bin/bzdiff
 	cp -f bzgrep.1 bzmore.1 bzdiff.1 $(PREFIX)/man/man1
 	chmod a+r $(PREFIX)/man/man1/bzgrep.1
@@ -124,10 +137,10 @@
 distclean: clean
 	rm -f manual.ps manual.html manual.pdf
 
-DISTNAME=bzip2-1.0.3
+DISTNAME=bzip2-1.0.4
 dist: check manual
 	rm -f $(DISTNAME)
-	ln -sf . $(DISTNAME)
+	ln -s -f . $(DISTNAME)
 	tar cvf $(DISTNAME).tar \
 	   $(DISTNAME)/blocksort.c \
 	   $(DISTNAME)/huffman.c \
@@ -167,7 +180,6 @@
 	   $(DISTNAME)/libbz2.dsp \
 	   $(DISTNAME)/dlltest.dsp \
 	   $(DISTNAME)/makefile.msc \
-	   $(DISTNAME)/Y2K_INFO \
 	   $(DISTNAME)/unzcrash.c \
 	   $(DISTNAME)/spewG.c \
 	   $(DISTNAME)/mk251.c \
diff --git a/Makefile-libbz2_so b/Makefile-libbz2_so
index 458c5a1..2b65f3b 100644
--- a/Makefile-libbz2_so
+++ b/Makefile-libbz2_so
@@ -1,15 +1,30 @@
 
 # This Makefile builds a shared version of the library, 
-# libbz2.so.1.0.3, with soname libbz2.so.1.0,
+# libbz2.so.1.0.4, with soname libbz2.so.1.0,
 # at least on x86-Linux (RedHat 7.2), 
 # with gcc-2.96 20000731 (Red Hat Linux 7.1 2.96-98).  
-# Please see the README file for some 
-# important info about building the library like this.
+# Please see the README file for some important info 
+# about building the library like this.
+
+# ------------------------------------------------------------------
+# This file is part of bzip2/libbzip2, a program and library for
+# lossless, block-sorting data compression.
+#
+# bzip2/libbzip2 version 1.0.4 of 20 December 2006
+# Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+#
+# Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+# README file.
+#
+# This program is released under the terms of the license contained
+# in the file LICENSE.
+# ------------------------------------------------------------------
+
 
 SHELL=/bin/sh
 CC=gcc
 BIGFILES=-D_FILE_OFFSET_BITS=64
-CFLAGS=-fpic -fPIC -Wall -Winline -O -g
+CFLAGS=-fpic -fPIC -Wall -Winline -O2 -g $(BIGFILES)
 
 OBJS= blocksort.o  \
       huffman.o    \
@@ -20,13 +35,13 @@
       bzlib.o
 
 all: $(OBJS)
-	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.3 $(OBJS)
-	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.3
+	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.4 $(OBJS)
+	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.4
 	rm -f libbz2.so.1.0
-	ln -s libbz2.so.1.0.3 libbz2.so.1.0
+	ln -s libbz2.so.1.0.4 libbz2.so.1.0
 
 clean: 
-	rm -f $(OBJS) bzip2.o libbz2.so.1.0.3 libbz2.so.1.0 bzip2-shared
+	rm -f $(OBJS) bzip2.o libbz2.so.1.0.4 libbz2.so.1.0 bzip2-shared
 
 blocksort.o: blocksort.c
 	$(CC) $(CFLAGS) -c blocksort.c
diff --git a/README b/README
index 1aff448..b18c096 100644
--- a/README
+++ b/README
@@ -1,33 +1,48 @@
 
-This is the README for bzip2, a block-sorting file compressor, version
-1.0.3.  This version is fully compatible with the previous public
-releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and 1.0.2.
+This is the README for bzip2/libzip2.
+This version is fully compatible with the previous public releases.
 
-bzip2-1.0.3 is distributed under a BSD-style license.  For details,
-see the file LICENSE.
+------------------------------------------------------------------
+This file is part of bzip2/libbzip2, a program and library for
+lossless, block-sorting data compression.
+
+bzip2/libbzip2 version 1.0.4 of 20 December 2006
+Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+Please read the WARNING, DISCLAIMER and PATENTS sections in this file.
+
+This program is released under the terms of the license contained
+in the file LICENSE.
+------------------------------------------------------------------
 
 Complete documentation is available in Postscript form (manual.ps),
 PDF (manual.pdf) or html (manual.html).  A plain-text version of the
-manual page is available as bzip2.txt.  A statement about Y2K issues
-is now included in the file Y2K_INFO.
+manual page is available as bzip2.txt.
 
 
 HOW TO BUILD -- UNIX
 
-Type `make'.  This builds the library libbz2.a and then the
-programs bzip2 and bzip2recover.  Six self-tests are run.
-If the self-tests complete ok, carry on to installation:
+Type 'make'.  This builds the library libbz2.a and then the programs
+bzip2 and bzip2recover.  Six self-tests are run.  If the self-tests
+complete ok, carry on to installation:
 
-To install in /usr/bin, /usr/lib, /usr/man and /usr/include, type
+To install in /usr/local/bin, /usr/local/lib, /usr/local/man and
+/usr/local/include, type
+
    make install
-To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type 
+
+To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type
+
    make install PREFIX=/xxx/yyy
+
 If you are (justifiably) paranoid and want to see what 'make install'
 is going to do, you can first do
+
    make -n install                      or
    make -n install PREFIX=/xxx/yyy      respectively.
-The -n instructs make to show the commands it would execute, but
-not actually execute them.
+
+The -n instructs make to show the commands it would execute, but not
+actually execute them.
 
 
 HOW TO BUILD -- UNIX, shared library libbz2.so.
@@ -49,23 +64,25 @@
 bzCompress to BZ2_bzCompress, to avoid namespace pollution.
 Unfortunately this means that the libbz2.so created by
 Makefile-libbz2_so will not work with any program which used an older
-version of the library.  Sorry.  I do encourage library clients to
-make the effort to upgrade to use version 1.0, since it is both faster
-and more robust than previous versions.
+version of the library.  I do encourage library clients to make the
+effort to upgrade to use version 1.0, since it is both faster and more
+robust than previous versions.
 
 
 HOW TO BUILD -- Windows 95, NT, DOS, Mac, etc.
 
 It's difficult for me to support compilation on all these platforms.
 My approach is to collect binaries for these platforms, and put them
-on the master web page (http://sources.redhat.com/bzip2).  Look there.
-However (FWIW), bzip2-1.0.X is very standard ANSI C and should compile
+on the master web site (http://www.bzip.org).  Look there.  However
+(FWIW), bzip2-1.0.X is very standard ANSI C and should compile
 unmodified with MS Visual C.  If you have difficulties building, you
 might want to read README.COMPILATION.PROBLEMS.
 
 At least using MS Visual C++ 6, you can build from the unmodified
 sources by issuing, in a command shell: 
+
    nmake -f makefile.msc
+
 (you may need to first run the MSVC-provided script VCVARS32.BAT
  so as to set up paths to the MSVC tools correctly).
 
@@ -86,18 +103,19 @@
 
 WARNING:
 
-   This program (attempts to) compress data by performing several
-   non-trivial transformations on it.  Unless you are 100% familiar
-   with *all* the algorithms contained herein, and with the
-   consequences of modifying them, you should NOT meddle with the
-   compression or decompression machinery.  Incorrect changes can and
-   very likely *will* lead to disastrous loss of data.
+   This program and library (attempts to) compress data by 
+   performing several non-trivial transformations on it.  
+   Unless you are 100% familiar with *all* the algorithms 
+   contained herein, and with the consequences of modifying them, 
+   you should NOT meddle with the compression or decompression 
+   machinery.  Incorrect changes can and very likely *will* 
+   lead to disastrous loss of data.
 
 
 DISCLAIMER:
 
    I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
-   USE OF THIS PROGRAM, HOWSOEVER CAUSED.
+   USE OF THIS PROGRAM/LIBRARY, HOWSOEVER CAUSED.
 
    Every compression of a file implies an assumption that the
    compressed file can be decompressed to reproduce the original.
@@ -110,19 +128,18 @@
    PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE POSSIBILITY, HOWEVER
    SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
 
-   That is not to say this program is inherently unreliable.  Indeed,
-   I very much hope the opposite is true.  bzip2 has been carefully
-   constructed and extensively tested.
+   That is not to say this program is inherently unreliable.  
+   Indeed, I very much hope the opposite is true.  bzip2/libbzip2 
+   has been carefully constructed and extensively tested.
 
 
 PATENTS:
 
-   To the best of my knowledge, bzip2 does not use any patented
-   algorithms.  However, I do not have the resources to carry out
-   a patent search.  Therefore I cannot give any guarantee of the
-   above statement.
+   To the best of my knowledge, bzip2/libbzip2 does not use any 
+   patented algorithms.  However, I do not have the resources 
+   to carry out a patent search.  Therefore I cannot give any 
+   guarantee of the above statement.
 
-End of legalities.
 
 
 WHAT'S NEW IN 0.9.0 (as compared to 0.1pl2) ?
@@ -156,21 +173,23 @@
 
    See the CHANGES file.
 
+WHAT'S NEW IN 1.0.4 ?
+
+   See the CHANGES file.
+
 
 I hope you find bzip2 useful.  Feel free to contact me at
    jseward@bzip.org
 if you have any suggestions or queries.  Many people mailed me with
 comments, suggestions and patches after the releases of bzip-0.15,
-bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and
-1.0.2, and the changes in bzip2 are largely a result of this feedback.
-I thank you for your comments.
+bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
+1.0.2 and 1.0.3, and the changes in bzip2 are largely a result of this
+feedback.  I thank you for your comments.
 
-At least for the time being, bzip2's "home" is (or can be reached via)
-http://www.bzip.org
+bzip2's "home" is http://www.bzip.org/
 
 Julian Seward
 jseward@bzip.org
-
 Cambridge, UK.
 
 18     July 1996 (version 0.15)
@@ -183,3 +202,4 @@
  5      May 2000 (bzip2, version 1.0pre8)
 30 December 2001 (bzip2, version 1.0.2pre1)
 15 February 2005 (bzip2, version 1.0.3)
+20 December 2006 (bzip2, version 1.0.4)
diff --git a/README.COMPILATION.PROBLEMS b/README.COMPILATION.PROBLEMS
index f1bc396..64ab586 100644
--- a/README.COMPILATION.PROBLEMS
+++ b/README.COMPILATION.PROBLEMS
@@ -1,32 +1,47 @@
+------------------------------------------------------------------
+This file is part of bzip2/libbzip2, a program and library for
+lossless, block-sorting data compression.
 
-bzip2-1.0.3 should compile without problems on the vast majority of
+bzip2/libbzip2 version 1.0.4 of 20 December 2006
+Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+README file.
+
+This program is released under the terms of the license contained
+in the file LICENSE.
+------------------------------------------------------------------
+
+bzip2-1.0.4 should compile without problems on the vast majority of
 platforms.  Using the supplied Makefile, I've built and tested it
-myself for x86-linux and x86_64-linux.  With makefile.msc, Visual C++
+myself for x86-linux and amd64-linux.  With makefile.msc, Visual C++
 6.0 and nmake, you can build a native Win32 version too.  Large file
-support seems to work correctly on at least alpha-tru64unix and
-x86-cygwin32 (on Windows 2000).
+support seems to work correctly on at least on amd64-linux.
 
 When I say "large file" I mean a file of size 2,147,483,648 (2^31)
 bytes or above.  Many older OSs can't handle files above this size,
 but many newer ones can.  Large files are pretty huge -- most files
 you'll encounter are not Large Files.
 
-Earlier versions of bzip2 (0.1, 0.9.0, 0.9.5) compiled on a wide
-variety of platforms without difficulty, and I hope this version will
-continue in that tradition.  However, in order to support large files,
-I've had to include the define -D_FILE_OFFSET_BITS=64 in the Makefile.
-This can cause problems.
+Early versions of bzip2 (0.1, 0.9.0, 0.9.5) compiled on a wide variety
+of platforms without difficulty, and I hope this version will continue
+in that tradition.  However, in order to support large files, I've had
+to include the define -D_FILE_OFFSET_BITS=64 in the Makefile.  This
+can cause problems.
 
 The technique of adding -D_FILE_OFFSET_BITS=64 to get large file
 support is, as far as I know, the Recommended Way to get correct large
 file support.  For more details, see the Large File Support
 Specification, published by the Large File Summit, at
+
    http://ftp.sas.com/standards/large.file
 
 As a general comment, if you get compilation errors which you think
 are related to large file support, try removing the above define from
 the Makefile, ie, delete the line
+
    BIGFILES=-D_FILE_OFFSET_BITS=64 
+
 from the Makefile, and do 'make clean ; make'.  This will give you a
 version of bzip2 without large file support, which, for most
 applications, is probably not a problem.  
@@ -37,3 +52,7 @@
 large file support, if you are feeling paranoid.  Be aware though that
 any compilation problems which affect bzip2 will also affect spewG.c,
 alas.
+
+AIX: I have reports that for large file support, you need to specify
+-D_LARGE_FILES rather than -D_FILE_OFFSET_BITS=64.  I have not tested
+this myself.
diff --git a/README.XML.STUFF b/README.XML.STUFF
index 0ff209f..93bf405 100644
--- a/README.XML.STUFF
+++ b/README.XML.STUFF
@@ -1,3 +1,17 @@
+  ----------------------------------------------------------------
+  This file is part of bzip2/libbzip2, a program and library for
+  lossless, block-sorting data compression.
+
+  bzip2/libbzip2 version 1.0.4 of 20 December 2006
+  Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+  Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+  README file.
+
+  This program is released under the terms of the license contained
+  in the file LICENSE.
+  ----------------------------------------------------------------
+
 The script xmlproc.sh takes an xml file as input,
 and processes it to create .pdf, .html or .ps output.
 It uses format.pl, a perl script to format <pre> blocks nicely,
@@ -9,16 +23,16 @@
 
 Usage:
 
-  xmlproc.sh -v manual.xml
+  ./xmlproc.sh -v manual.xml
   Validates an xml file to ensure no dtd-compliance errors
 
-  xmlproc.sh -html manual.xml
+  ./xmlproc.sh -html manual.xml
   Output: manual.html
 
-  xmlproc.sh -pdf manual.xml
+  ./xmlproc.sh -pdf manual.xml
   Output: manual.pdf
 
-  xmlproc.sh -ps manual.xml
+  ./xmlproc.sh -ps manual.xml
   Output: manual.ps
 
 
diff --git a/Y2K_INFO b/Y2K_INFO
deleted file mode 100644
index 55fd56a..0000000
--- a/Y2K_INFO
+++ /dev/null
@@ -1,34 +0,0 @@
-
-Y2K status of bzip2 and libbzip2, versions 0.1, 0.9.0 and 0.9.5
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Informally speaking:
-   bzip2 is a compression program built on top of libbzip2, 
-   a library which does the real work of compression and 
-   decompression.  As far as I am aware, libbzip2 does not have 
-   any date-related code at all.
-
-   bzip2 itself copies dates from source to destination files 
-   when compressing or decompressing, using the 'stat' and 'utime' 
-   UNIX system calls.  It doesn't examine, manipulate or store the 
-   dates in any way.  So as far as I can see, there shouldn't be any 
-   problem with bzip2 providing 'stat' and 'utime' work correctly 
-   on your system.
-
-   On non-unix platforms (those for which BZ_UNIX in bzip2.c is
-   not set to 1), bzip2 doesn't even do the date copying.
-
-   Overall, informally speaking, I don't think bzip2 or libbzip2 
-   have a Y2K problem.
-
-Formally speaking:
-   I am not prepared to offer you any assurance whatsoever 
-   regarding Y2K issues in my software.  You alone assume the 
-   entire risk of using the software.  The disclaimer of liability 
-   in the LICENSE file in the bzip2 source distribution continues 
-   to apply on this issue as with every other issue pertaining 
-   to the software.
-
-Julian Seward
-Cambridge, UK
-25 August 1999
diff --git a/blocksort.c b/blocksort.c
index 33ec9f5..8535c93 100644
--- a/blocksort.c
+++ b/blocksort.c
@@ -4,66 +4,19 @@
 /*---                                           blocksort.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
-
-  To get some idea how the block sorting algorithms in this file 
-  work, read my paper 
-     On the Performance of BWT Sorting Algorithms
-  in Proceedings of the IEEE Data Compression Conference 2000,
-  Snowbird, Utah, USA, 27-30 March 2000.  The main sort in this
-  file implements the algorithm called  cache  in the paper.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #include "bzlib_private.h"
@@ -155,7 +108,7 @@
 
    while (sp > 0) {
 
-      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );
+      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE - 1, 1004 );
 
       fpop ( lo, hi );
       if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
@@ -690,7 +643,7 @@
 
    while (sp > 0) {
 
-      AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );
+      AssertH ( sp < MAIN_QSORT_STACK_SIZE - 2, 1001 );
 
       mpop ( lo, hi, d );
       if (hi - lo < MAIN_QSORT_SMALL_THRESH || 
diff --git a/bz-fo.xsl b/bz-fo.xsl
index 7f2a767..ba3e301 100644
--- a/bz-fo.xsl
+++ b/bz-fo.xsl
@@ -254,4 +254,23 @@
 </xsl:template>
 
 
+<!-- Bug-fix for Suse 10 PassiveTex version -->
+<!-- Precompute attribute values 'cos PassiveTex is too stupid: -->
+<xsl:attribute-set name="component.title.properties">
+  <xsl:attribute name="keep-with-next.within-column">always</xsl:attribute>
+  <xsl:attribute name="space-before.optimum">
+    <xsl:value-of select="concat($body.font.master, 'pt')"/>
+  </xsl:attribute>
+  <xsl:attribute name="space-before.minimum">
+    <xsl:value-of select="$body.font.master * 0.8"/>
+    <xsl:text>pt</xsl:text>
+  </xsl:attribute>
+  <xsl:attribute name="space-before.maximum">
+    <xsl:value-of select="$body.font.master * 1.2"/>
+    <xsl:text>pt</xsl:text>
+  </xsl:attribute>
+  <xsl:attribute name="hyphenate">false</xsl:attribute>
+</xsl:attribute-set>
+
+
 </xsl:stylesheet>
diff --git a/bzdiff b/bzdiff
index 3c2eb85..6fc38f9 100644
--- a/bzdiff
+++ b/bzdiff
@@ -12,7 +12,7 @@
 # necessary) and fed to cmp or diff.  The exit status from cmp
 # or diff is preserved.
 
-PATH="/usr/bin:$PATH"; export PATH
+PATH="/usr/bin:/bin:$PATH"; export PATH
 prog=`echo $0 | sed 's|.*/||'`
 case "$prog" in
   *cmp) comp=${CMP-cmp}   ;;
@@ -37,7 +37,7 @@
 	echo "Usage: $prog [${comp}_options] file [file]"
 	exit 1
 fi
-tmp=`tempfile -d /tmp -p bz` || {
+tmp=`mktemp ${TMPDIR:-/tmp}/bzdiff.XXXXXXXXXX` || {
       echo 'cannot create a temporary file' >&2
       exit 1
 }
diff --git a/bzgrep b/bzgrep
index dbfc00e..9a04b83 100644
--- a/bzgrep
+++ b/bzgrep
@@ -63,7 +63,11 @@
     bzip2 -cdfq "$i" | $grep $opt "$pat"
     r=$?
   else
-    bzip2 -cdfq "$i" | $grep $opt "$pat" | sed "s|^|${i}:|"
+    j=${i//\\/\\\\}
+    j=${j//|/\\|}
+    j=${j//&/\\&}
+    j=`printf "%s" "$j" | tr '\n' ' '`
+    bzip2 -cdfq "$i" | $grep $opt "$pat" | sed "s|^|${j}:|"
     r=$?
   fi
   test "$r" -ne 0 && res="$r"
diff --git a/bzip2.1 b/bzip2.1
index d2c0661..a313f2d 100644
--- a/bzip2.1
+++ b/bzip2.1
@@ -1,7 +1,7 @@
 .PU
 .TH bzip2 1
 .SH NAME
-bzip2, bunzip2 \- a block-sorting file compressor, v1.0.3
+bzip2, bunzip2 \- a block-sorting file compressor, v1.0.4
 .br
 bzcat \- decompresses files to stdout
 .br
@@ -405,11 +405,11 @@
 tries hard to detect I/O errors and exit cleanly, but the details of
 what the problem is sometimes seem rather misleading.
 
-This manual page pertains to version 1.0.3 of
+This manual page pertains to version 1.0.4 of
 .I bzip2.  
 Compressed data created by this version is entirely forwards and
 backwards compatible with the previous public releases, versions
-0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and 1.0.2, but with the following
+0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1, 1.0.2 and 1.0.3, but with the following
 exception: 0.9.0 and above can correctly decompress multiple
 concatenated compressed files.  0.1pl2 cannot do this; it will stop
 after decompressing just the first file in the stream.
diff --git a/bzip2.1.preformatted b/bzip2.1.preformatted
index 129ca83..15e16e5 100644
--- a/bzip2.1.preformatted
+++ b/bzip2.1.preformatted
@@ -3,7 +3,7 @@
 
 
 NNAAMMEE
-       bzip2, bunzip2 − a block‐sorting file compressor, v1.0.3
+       bzip2, bunzip2 − a block‐sorting file compressor, v1.0.4
        bzcat − decompresses files to stdout
        bzip2recover − recovers data from damaged bzip2 files
 
@@ -348,14 +348,14 @@
        but  the  details  of  what  the problem is sometimes seem
        rather misleading.
 
-       This manual page pertains to version 1.0.3 of _b_z_i_p_2_.  Com­
+       This manual page pertains to version 1.0.4 of _b_z_i_p_2_.  Com­
        pressed  data created by this version is entirely forwards
        and  backwards  compatible  with   the   previous   public
-       releases,  versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and
-       1.0.2, but with the following exception: 0.9.0  and  above
-       can  correctly decompress multiple concatenated compressed
-       files.  0.1pl2 cannot do this; it will stop  after  decom­
-       pressing just the first file in the stream.
+       releases,  versions  0.1pl2,  0.9.0,  0.9.5, 1.0.0, 1.0.1, 
+       1.0.2 and 1.0.3, but with the  following  exception: 0.9.0
+       and above can  correctly decompress  multiple concatenated
+       compressed files.  0.1pl2  cannot do this;  it  will  stop 
+       after  decompressing just the first file in the stream.
 
        _b_z_i_p_2_r_e_c_o_v_e_r  versions prior to 1.0.2 used 32‐bit integers
        to represent bit positions in compressed  files,  so  they
diff --git a/bzip2.c b/bzip2.c
index 79f87a5..5fbae0e 100644
--- a/bzip2.c
+++ b/bzip2.c
@@ -3,118 +3,26 @@
 /*--- A block-sorting, lossless compressor        bzip2.c ---*/
 /*-----------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
-/*----------------------------------------------------*/
-/*--- IMPORTANT                                    ---*/
-/*----------------------------------------------------*/
-
-/*--
-   WARNING:
-      This program and library (attempts to) compress data by 
-      performing several non-trivial transformations on it.  
-      Unless you are 100% familiar with *all* the algorithms 
-      contained herein, and with the consequences of modifying them, 
-      you should NOT meddle with the compression or decompression 
-      machinery.  Incorrect changes can and very likely *will* 
-      lead to disasterous loss of data.
-
-   DISCLAIMER:
-      I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
-      USE OF THIS PROGRAM, HOWSOEVER CAUSED.
-
-      Every compression of a file implies an assumption that the
-      compressed file can be decompressed to reproduce the original.
-      Great efforts in design, coding and testing have been made to
-      ensure that this program works correctly.  However, the
-      complexity of the algorithms, and, in particular, the presence
-      of various special cases in the code which occur with very low
-      but non-zero probability make it impossible to rule out the
-      possibility of bugs remaining in the program.  DO NOT COMPRESS
-      ANY DATA WITH THIS PROGRAM AND/OR LIBRARY UNLESS YOU ARE PREPARED 
-      TO ACCEPT THE POSSIBILITY, HOWEVER SMALL, THAT THE DATA WILL 
-      NOT BE RECOVERABLE.
-
-      That is not to say this program is inherently unreliable.
-      Indeed, I very much hope the opposite is true.  bzip2/libbzip2
-      has been carefully constructed and extensively tested.
-
-   PATENTS:
-      To the best of my knowledge, bzip2/libbzip2 does not use any 
-      patented algorithms.  However, I do not have the resources 
-      available to carry out a full patent search.  Therefore I cannot 
-      give any guarantee of the above statement.
---*/
-
-
-
-/*----------------------------------------------------*/
-/*--- and now for something much more pleasant :-) ---*/
-/*----------------------------------------------------*/
-
-/*---------------------------------------------*/
-/*--
-  Place a 1 beside your platform, and 0 elsewhere.
---*/
-
-/*--
-  Generic 32-bit Unix.
-  Also works on 64-bit Unix boxes.
-  This is the default.
---*/
+/* Place a 1 beside your platform, and 0 elsewhere.
+   Generic 32-bit Unix.
+   Also works on 64-bit Unix boxes.
+   This is the default.
+*/
 #define BZ_UNIX      1
 
 /*--
@@ -302,16 +210,17 @@
 FILE    *outputHandleJustInCase;
 Int32   workFactor;
 
-static void    panic                 ( Char* )   NORETURN;
-static void    ioError               ( void )    NORETURN;
-static void    outOfMemory           ( void )    NORETURN;
-static void    configError           ( void )    NORETURN;
-static void    crcError              ( void )    NORETURN;
-static void    cleanUpAndFail        ( Int32 )   NORETURN;
-static void    compressedStreamEOF   ( void )    NORETURN;
+static void    panic                 ( const Char* ) NORETURN;
+static void    ioError               ( void )        NORETURN;
+static void    outOfMemory           ( void )        NORETURN;
+static void    configError           ( void )        NORETURN;
+static void    crcError              ( void )        NORETURN;
+static void    cleanUpAndFail        ( Int32 )       NORETURN;
+static void    compressedStreamEOF   ( void )        NORETURN;
 
 static void    copyFileName ( Char*, Char* );
 static void*   myMalloc     ( Int32 );
+static void    applySavedFileAttrToOutputFile ( IntNative fd );
 
 
 
@@ -457,6 +366,9 @@
    ret = fflush ( zStream );
    if (ret == EOF) goto errhandler_io;
    if (zStream != stdout) {
+      Int32 fd = fileno ( zStream );
+      if (fd < 0) goto errhandler_io;
+      applySavedFileAttrToOutputFile ( fd );
       ret = fclose ( zStream );
       outputHandleJustInCase = NULL;
       if (ret == EOF) goto errhandler_io;
@@ -569,6 +481,11 @@
 
    closeok:
    if (ferror(zStream)) goto errhandler_io;
+   if (stream != stdout) {
+      Int32 fd = fileno ( stream );
+      if (fd < 0) goto errhandler_io;
+      applySavedFileAttrToOutputFile ( fd );
+   }
    ret = fclose ( zStream );
    if (ret == EOF) goto errhandler_io;
 
@@ -826,7 +743,7 @@
 
 /*---------------------------------------------*/
 static 
-void panic ( Char* s )
+void panic ( const Char* s )
 {
    fprintf ( stderr,
              "\n%s: PANIC -- internal consistency error:\n"
@@ -1039,6 +956,7 @@
    For non-Unix platforms, if we are not worrying about
    security issues, simple this simply behaves like fopen.
 */
+static
 FILE* fopen_output_safely ( Char* name, const char* mode )
 {
 #  if BZ_UNIX
@@ -1129,7 +1047,7 @@
 
 
 static 
-void applySavedMetaInfoToOutputFile ( Char *dstName )
+void applySavedTimeInfoToOutputFile ( Char *dstName )
 {
 #  if BZ_UNIX
    IntNative      retVal;
@@ -1138,13 +1056,21 @@
    uTimBuf.actime = fileMetaInfo.st_atime;
    uTimBuf.modtime = fileMetaInfo.st_mtime;
 
-   retVal = chmod ( dstName, fileMetaInfo.st_mode );
-   ERROR_IF_NOT_ZERO ( retVal );
-
    retVal = utime ( dstName, &uTimBuf );
    ERROR_IF_NOT_ZERO ( retVal );
+#  endif
+}
 
-   retVal = chown ( dstName, fileMetaInfo.st_uid, fileMetaInfo.st_gid );
+static 
+void applySavedFileAttrToOutputFile ( IntNative fd )
+{
+#  if BZ_UNIX
+   IntNative retVal;
+
+   retVal = fchmod ( fd, fileMetaInfo.st_mode );
+   ERROR_IF_NOT_ZERO ( retVal );
+
+   (void) fchown ( fd, fileMetaInfo.st_uid, fileMetaInfo.st_gid );
    /* chown() will in many cases return with EPERM, which can
       be safely ignored.
    */
@@ -1175,13 +1101,13 @@
 /*---------------------------------------------*/
 #define BZ_N_SUFFIX_PAIRS 4
 
-Char* zSuffix[BZ_N_SUFFIX_PAIRS] 
+const Char* zSuffix[BZ_N_SUFFIX_PAIRS] 
    = { ".bz2", ".bz", ".tbz2", ".tbz" };
-Char* unzSuffix[BZ_N_SUFFIX_PAIRS] 
+const Char* unzSuffix[BZ_N_SUFFIX_PAIRS] 
    = { "", "", ".tar", ".tar" };
 
 static 
-Bool hasSuffix ( Char* s, Char* suffix )
+Bool hasSuffix ( Char* s, const Char* suffix )
 {
    Int32 ns = strlen(s);
    Int32 nx = strlen(suffix);
@@ -1192,7 +1118,8 @@
 
 static 
 Bool mapSuffix ( Char* name, 
-                 Char* oldSuffix, Char* newSuffix )
+                 const Char* oldSuffix, 
+                 const Char* newSuffix )
 {
    if (!hasSuffix(name,oldSuffix)) return False;
    name[strlen(name)-strlen(oldSuffix)] = 0;
@@ -1217,8 +1144,8 @@
 
    switch (srcMode) {
       case SM_I2O: 
-         copyFileName ( inName, "(stdin)" );
-         copyFileName ( outName, "(stdout)" ); 
+         copyFileName ( inName, (Char*)"(stdin)" );
+         copyFileName ( outName, (Char*)"(stdout)" ); 
          break;
       case SM_F2F: 
          copyFileName ( inName, name );
@@ -1227,7 +1154,7 @@
          break;
       case SM_F2O: 
          copyFileName ( inName, name );
-         copyFileName ( outName, "(stdout)" ); 
+         copyFileName ( outName, (Char*)"(stdout)" ); 
          break;
    }
 
@@ -1370,7 +1297,7 @@
 
    /*--- If there was an I/O error, we won't get here. ---*/
    if ( srcMode == SM_F2F ) {
-      applySavedMetaInfoToOutputFile ( outName );
+      applySavedTimeInfoToOutputFile ( outName );
       deleteOutputOnInterrupt = False;
       if ( !keepInputFiles ) {
          IntNative retVal = remove ( inName );
@@ -1401,8 +1328,8 @@
    cantGuess = False;
    switch (srcMode) {
       case SM_I2O: 
-         copyFileName ( inName, "(stdin)" );
-         copyFileName ( outName, "(stdout)" ); 
+         copyFileName ( inName, (Char*)"(stdin)" );
+         copyFileName ( outName, (Char*)"(stdout)" ); 
          break;
       case SM_F2F: 
          copyFileName ( inName, name );
@@ -1415,7 +1342,7 @@
          break;
       case SM_F2O: 
          copyFileName ( inName, name );
-         copyFileName ( outName, "(stdout)" ); 
+         copyFileName ( outName, (Char*)"(stdout)" ); 
          break;
    }
 
@@ -1548,7 +1475,7 @@
    /*--- If there was an I/O error, we won't get here. ---*/
    if ( magicNumberOK ) {
       if ( srcMode == SM_F2F ) {
-         applySavedMetaInfoToOutputFile ( outName );
+         applySavedTimeInfoToOutputFile ( outName );
          deleteOutputOnInterrupt = False;
          if ( !keepInputFiles ) {
             IntNative retVal = remove ( inName );
@@ -1593,9 +1520,9 @@
    if (name == NULL && srcMode != SM_I2O)
       panic ( "testf: bad modes\n" );
 
-   copyFileName ( outName, "(none)" );
+   copyFileName ( outName, (Char*)"(none)" );
    switch (srcMode) {
-      case SM_I2O: copyFileName ( inName, "(stdin)" ); break;
+      case SM_I2O: copyFileName ( inName, (Char*)"(stdin)" ); break;
       case SM_F2F: copyFileName ( inName, name ); break;
       case SM_F2O: copyFileName ( inName, name ); break;
    }
@@ -1678,11 +1605,11 @@
     "bzip2, a block-sorting file compressor.  "
     "Version %s.\n"
     "   \n"
-    "   Copyright (C) 1996-2005 by Julian Seward.\n"
+    "   Copyright (C) 1996-2006 by Julian Seward.\n"
     "   \n"
     "   This program is free software; you can redistribute it and/or modify\n"
     "   it under the terms set out in the LICENSE file, which is included\n"
-    "   in the bzip2-1.0 source distribution.\n"
+    "   in the bzip2-1.0.4 source distribution.\n"
     "   \n"
     "   This program is distributed in the hope that it will be useful,\n"
     "   but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
@@ -1885,8 +1812,8 @@
 #  endif
 #  endif
 
-   copyFileName ( inName,  "(none)" );
-   copyFileName ( outName, "(none)" );
+   copyFileName ( inName,  (Char*)"(none)" );
+   copyFileName ( outName, (Char*)"(none)" );
 
    copyFileName ( progNameReally, argv[0] );
    progName = &progNameReally[0];
@@ -1898,8 +1825,8 @@
         expand filename wildcards in arg list.
    --*/
    argList = NULL;
-   addFlagsFromEnvVar ( &argList,  "BZIP2" );
-   addFlagsFromEnvVar ( &argList,  "BZIP" );
+   addFlagsFromEnvVar ( &argList,  (Char*)"BZIP2" );
+   addFlagsFromEnvVar ( &argList,  (Char*)"BZIP" );
    for (i = 1; i <= argc-1; i++)
       APPEND_FILESPEC(argList, argv[i]);
 
diff --git a/bzip2.txt b/bzip2.txt
index bf895b6..4fb9c74 100644
--- a/bzip2.txt
+++ b/bzip2.txt
@@ -1,6 +1,6 @@
 
 NAME
-       bzip2, bunzip2 - a block-sorting file compressor, v1.0.3
+       bzip2, bunzip2 - a block-sorting file compressor, v1.0.4
        bzcat - decompresses files to stdout
        bzip2recover - recovers data from damaged bzip2 files
 
@@ -345,14 +345,14 @@
        but  the  details  of  what  the problem is sometimes seem
        rather misleading.
 
-       This manual page pertains to version 1.0.3 of bzip2.  Com-
+       This manual page pertains to version 1.0.4 of bzip2.  Com-
        pressed  data created by this version is entirely forwards
        and  backwards  compatible  with   the   previous   public
-       releases,  versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and
-       1.0.2, but with the following exception: 0.9.0  and  above
-       can  correctly decompress multiple concatenated compressed
-       files.  0.1pl2 cannot do this; it will stop  after  decom-
-       pressing just the first file in the stream.
+       releases,  versions  0.1pl2,  0.9.0,  0.9.5, 1.0.0, 1.0.1,
+       1.0.2 and 1.0.3, but with the  following  exception: 0.9.0
+       and above can  correctly decompress  multiple concatenated
+       compressed files.  0.1pl2  cannot do this;  it  will  stop
+       after  decompressing just the first file in the stream.
 
        bzip2recover  versions prior to 1.0.2 used 32-bit integers
        to represent bit positions in compressed  files,  so  they
diff --git a/bzip2recover.c b/bzip2recover.c
index 5cd405d..ffe60bc 100644
--- a/bzip2recover.c
+++ b/bzip2recover.c
@@ -1,56 +1,24 @@
-
 /*-----------------------------------------------------------*/
 /*--- Block recoverer program for bzip2                   ---*/
 /*---                                      bzip2recover.c ---*/
 /*-----------------------------------------------------------*/
 
-/*--
-  This program is bzip2recover, a program to attempt data 
-  salvage from damaged files created by the accompanying
-  bzip2-1.0.3 program.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0.3 of 15 February 2005
---*/
-
-/*--
-  This program is a complete hack and should be rewritten
-  properly.  It isn't very complicated.
---*/
+/* This program is a complete hack and should be rewritten properly.
+	 It isn't very complicated. */
 
 #include <stdio.h>
 #include <errno.h>
@@ -114,7 +82,7 @@
 /*---------------------------------------------------*/
 
 /*---------------------------------------------*/
-void readError ( void )
+static void readError ( void )
 {
    fprintf ( stderr,
              "%s: I/O error reading `%s', possible reason follows.\n",
@@ -127,7 +95,7 @@
 
 
 /*---------------------------------------------*/
-void writeError ( void )
+static void writeError ( void )
 {
    fprintf ( stderr,
              "%s: I/O error reading `%s', possible reason follows.\n",
@@ -140,7 +108,7 @@
 
 
 /*---------------------------------------------*/
-void mallocFail ( Int32 n )
+static void mallocFail ( Int32 n )
 {
    fprintf ( stderr,
              "%s: malloc failed on request for %d bytes.\n",
@@ -152,7 +120,7 @@
 
 
 /*---------------------------------------------*/
-void tooManyBlocks ( Int32 max_handled_blocks )
+static void tooManyBlocks ( Int32 max_handled_blocks )
 {
    fprintf ( stderr,
              "%s: `%s' appears to contain more than %d blocks\n",
@@ -183,7 +151,7 @@
 
 
 /*---------------------------------------------*/
-BitStream* bsOpenReadStream ( FILE* stream )
+static BitStream* bsOpenReadStream ( FILE* stream )
 {
    BitStream *bs = malloc ( sizeof(BitStream) );
    if (bs == NULL) mallocFail ( sizeof(BitStream) );
@@ -196,7 +164,7 @@
 
 
 /*---------------------------------------------*/
-BitStream* bsOpenWriteStream ( FILE* stream )
+static BitStream* bsOpenWriteStream ( FILE* stream )
 {
    BitStream *bs = malloc ( sizeof(BitStream) );
    if (bs == NULL) mallocFail ( sizeof(BitStream) );
@@ -209,7 +177,7 @@
 
 
 /*---------------------------------------------*/
-void bsPutBit ( BitStream* bs, Int32 bit )
+static void bsPutBit ( BitStream* bs, Int32 bit )
 {
    if (bs->buffLive == 8) {
       Int32 retVal = putc ( (UChar) bs->buffer, bs->handle );
@@ -228,7 +196,7 @@
 /*--
    Returns 0 or 1, or 2 to indicate EOF.
 --*/
-Int32 bsGetBit ( BitStream* bs )
+static Int32 bsGetBit ( BitStream* bs )
 {
    if (bs->buffLive > 0) {
       bs->buffLive --;
@@ -247,7 +215,7 @@
 
 
 /*---------------------------------------------*/
-void bsClose ( BitStream* bs )
+static void bsClose ( BitStream* bs )
 {
    Int32 retVal;
 
@@ -271,7 +239,7 @@
 
 
 /*---------------------------------------------*/
-void bsPutUChar ( BitStream* bs, UChar c )
+static void bsPutUChar ( BitStream* bs, UChar c )
 {
    Int32 i;
    for (i = 7; i >= 0; i--)
@@ -280,7 +248,7 @@
 
 
 /*---------------------------------------------*/
-void bsPutUInt32 ( BitStream* bs, UInt32 c )
+static void bsPutUInt32 ( BitStream* bs, UInt32 c )
 {
    Int32 i;
 
@@ -290,7 +258,7 @@
 
 
 /*---------------------------------------------*/
-Bool endsInBz2 ( Char* name )
+static Bool endsInBz2 ( Char* name )
 {
    Int32 n = strlen ( name );
    if (n <= 4) return False;
@@ -345,7 +313,7 @@
    inFileName[0] = outFileName[0] = 0;
 
    fprintf ( stderr, 
-             "bzip2recover 1.0.3: extracts blocks from damaged .bz2 files.\n" );
+             "bzip2recover 1.0.4: extracts blocks from damaged .bz2 files.\n" );
 
    if (argc != 2) {
       fprintf ( stderr, "%s: usage is `%s damaged_file_name'.\n",
diff --git a/bzlib.c b/bzlib.c
index e9c1e87..79c34a5 100644
--- a/bzlib.c
+++ b/bzlib.c
@@ -4,74 +4,29 @@
 /*---                                               bzlib.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
+/* CHANGES
+   0.9.0    -- original version.
    0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * made zero-length BZ_FLUSH work correctly in bzCompress().
-      * fixed bzWrite/bzRead to ignore zero-length requests.
-      * fixed bzread to correctly handle read requests after EOF.
-      * wrong parameter order in call to bzDecompressInit in
-        bzBuffToBuffDecompress.  Fixed.
---*/
+   0.9.0c   -- made zero-length BZ_FLUSH work correctly in bzCompress().
+     fixed bzWrite/bzRead to ignore zero-length requests.
+     fixed bzread to correctly handle read requests after EOF.
+     wrong parameter order in call to bzDecompressInit in
+     bzBuffToBuffDecompress.  Fixed.
+*/
 
 #include "bzlib_private.h"
 
@@ -1394,8 +1349,7 @@
 
 /*---------------------------------------------------*/
 /*--
-   Code contributed by Yoshioka Tsuneo
-   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
+   Code contributed by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)
    to support better zlib compatibility.
    This code is not _officially_ part of libbzip2 (yet);
    I haven't tested it, documented it, or considered the
@@ -1406,7 +1360,7 @@
 
 /*---------------------------------------------------*/
 /*--
-   return version like "0.9.0c".
+   return version like "0.9.5d, 4-Sept-1999".
 --*/
 const char * BZ_API(BZ2_bzlibVersion)(void)
 {
@@ -1559,9 +1513,10 @@
 void BZ_API(BZ2_bzclose) (BZFILE* b)
 {
    int bzerr;
-   FILE *fp = ((bzFile *)b)->handle;
+   FILE *fp;
    
    if (b==NULL) {return;}
+   fp = ((bzFile *)b)->handle;
    if(((bzFile*)b)->writing){
       BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
       if(bzerr != BZ_OK){
@@ -1580,7 +1535,7 @@
 /*--
    return last error code 
 --*/
-static char *bzerrorstrings[] = {
+static const char *bzerrorstrings[] = {
        "OK"
       ,"SEQUENCE_ERROR"
       ,"PARAM_ERROR"
diff --git a/bzlib.h b/bzlib.h
index 3237243..fdb0dbe 100644
--- a/bzlib.h
+++ b/bzlib.h
@@ -4,59 +4,19 @@
 /*---                                               bzlib.h ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #ifndef _BZLIB_H
@@ -262,8 +222,7 @@
 
 
 /*--
-   Code contributed by Yoshioka Tsuneo
-   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
+   Code contributed by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)
    to support better zlib compatibility.
    This code is not _officially_ part of libbzip2 (yet);
    I haven't tested it, documented it, or considered the
diff --git a/bzlib_private.h b/bzlib_private.h
index ca76fe6..d0a0554 100644
--- a/bzlib_private.h
+++ b/bzlib_private.h
@@ -4,59 +4,19 @@
 /*---                                       bzlib_private.h ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #ifndef _BZLIB_PRIVATE_H
@@ -76,7 +36,7 @@
 
 /*-- General stuff. --*/
 
-#define BZ_VERSION  "1.0.3, 15-Feb-2005"
+#define BZ_VERSION  "1.0.4, 20-Dec-2006"
 
 typedef char            Char;
 typedef unsigned char   Bool;
@@ -94,9 +54,11 @@
 #endif 
 
 #ifndef BZ_NO_STDIO
+
 extern void BZ2_bz__AssertH__fail ( int errcode );
 #define AssertH(cond,errcode) \
    { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
+
 #if BZ_DEBUG
 #define AssertD(cond,msg) \
    { if (!(cond)) {       \
@@ -107,6 +69,7 @@
 #else
 #define AssertD(cond,msg) /* */
 #endif
+
 #define VPrintf0(zf) \
    fprintf(stderr,zf)
 #define VPrintf1(zf,za1) \
@@ -119,17 +82,20 @@
    fprintf(stderr,zf,za1,za2,za3,za4)
 #define VPrintf5(zf,za1,za2,za3,za4,za5) \
    fprintf(stderr,zf,za1,za2,za3,za4,za5)
+
 #else
+
 extern void bz_internal_error ( int errcode );
 #define AssertH(cond,errcode) \
    { if (!(cond)) bz_internal_error ( errcode ); }
-#define AssertD(cond,msg) /* */
-#define VPrintf0(zf) /* */
-#define VPrintf1(zf,za1) /* */
-#define VPrintf2(zf,za1,za2) /* */
-#define VPrintf3(zf,za1,za2,za3) /* */
-#define VPrintf4(zf,za1,za2,za3,za4) /* */
-#define VPrintf5(zf,za1,za2,za3,za4,za5) /* */
+#define AssertD(cond,msg)                do { } while (0)
+#define VPrintf0(zf)                     do { } while (0)
+#define VPrintf1(zf,za1)                 do { } while (0)
+#define VPrintf2(zf,za1,za2)             do { } while (0)
+#define VPrintf3(zf,za1,za2,za3)         do { } while (0)
+#define VPrintf4(zf,za1,za2,za3,za4)     do { } while (0)
+#define VPrintf5(zf,za1,za2,za3,za4,za5) do { } while (0)
+
 #endif
 
 
diff --git a/compress.c b/compress.c
index 7e0c291..d98d5c0 100644
--- a/compress.c
+++ b/compress.c
@@ -4,71 +4,27 @@
 /*---                                            compress.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
 
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
-   0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * changed setting of nGroups in sendMTFValues() so as to 
-        do a bit better on small files
---*/
+/* CHANGES
+    0.9.0    -- original version.
+    0.9.0a/b -- no changes in this file.
+    0.9.0c   -- changed setting of nGroups in sendMTFValues() 
+                so as to do a bit better on small files
+*/
 
 #include "bzlib_private.h"
 
diff --git a/crctable.c b/crctable.c
index b6dadfc..bc7e2ae 100644
--- a/crctable.c
+++ b/crctable.c
@@ -4,59 +4,19 @@
 /*---                                            crctable.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #include "bzlib_private.h"
diff --git a/decompress.c b/decompress.c
index 81c3d2c..124cc8d 100644
--- a/decompress.c
+++ b/decompress.c
@@ -4,59 +4,19 @@
 /*---                                          decompress.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #include "bzlib_private.h"
diff --git a/dlltest.c b/dlltest.c
index 2d7dcca..03fa146 100644
--- a/dlltest.c
+++ b/dlltest.c
@@ -1,9 +1,8 @@
 /*
    minibz2
       libbz2.dll test program.
-      by Yoshioka Tsuneo(QWF00133@nifty.ne.jp/tsuneo-y@is.aist-nara.ac.jp)
-      This file is Public Domain.
-      welcome any email to me.
+      by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp)
+      This file is Public Domain.  Welcome any email to me.
 
    usage: minibz2 [-d] [-{1,2,..9}] [[srcfilename] destfilename]
 */
diff --git a/entities.xml b/entities.xml
index 6d0975f..ce2b70d 100644
--- a/entities.xml
+++ b/entities.xml
@@ -1,9 +1,9 @@
 <!-- misc. strings -->
 <!ENTITY bz-url "http://www.bzip.org">
 <!ENTITY bz-email "jseward@bzip.org">
-<!ENTITY bz-lifespan "1996-2005">
+<!ENTITY bz-lifespan "1996-2006">
 
-<!ENTITY bz-version "1.0.3">
-<!ENTITY bz-date "15 February 2005">
+<!ENTITY bz-version "1.0.4">
+<!ENTITY bz-date "20 December 2006">
 
 <!ENTITY manual-title "bzip2 Manual">
diff --git a/format.pl b/format.pl
index 8ab47ac..bd03043 100755
--- a/format.pl
+++ b/format.pl
@@ -1,4 +1,19 @@
 #!/usr/bin/perl -w
+#
+# ------------------------------------------------------------------
+# This file is part of bzip2/libbzip2, a program and library for
+# lossless, block-sorting data compression.
+#
+# bzip2/libbzip2 version 1.0.4 of 20 December 2006
+# Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+#
+# Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+# README file.
+#
+# This program is released under the terms of the license contained
+# in the file LICENSE.
+# ------------------------------------------------------------------
+#
 use strict;
 
 # get command line values:
diff --git a/huffman.c b/huffman.c
index 5bf190b..be4dc02 100644
--- a/huffman.c
+++ b/huffman.c
@@ -4,59 +4,19 @@
 /*---                                             huffman.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #include "bzlib_private.h"
diff --git a/manual.xml b/manual.xml
index 1ab5bd7..b22a6c8 100644
--- a/manual.xml
+++ b/manual.xml
@@ -9,7 +9,7 @@
 <book lang="en" id="userman" xreflabel="bzip2 Manual">
 
  <bookinfo>
-  <title>bzip2 and libbzip2, version 1.0.3</title>
+  <title>bzip2 and libbzip2, version 1.0.4</title>
   <subtitle>A program and library for data compression</subtitle>
   <copyright>
    <year>&bz-lifespan;</year>
@@ -139,7 +139,7 @@
 
  <listitem><para><computeroutput>bzip2</computeroutput>,
   <computeroutput>bunzip2</computeroutput> - a block-sorting file
-  compressor, v1.0.3</para></listitem>
+  compressor, v1.0.4</para></listitem>
 
  <listitem><para><computeroutput>bzcat</computeroutput> -
    decompresses files to stdout</para></listitem>
@@ -625,13 +625,13 @@
 sometimes seem rather misleading.</para>
 
 <para>This manual page pertains to version &bz-version; of
-<computeroutput>bzip2</computeroutput>.  Compressed data created
-by this version is entirely forwards and backwards compatible
-with the previous public releases, versions 0.1pl2, 0.9.0 and
-0.9.5, 1.0.0, 1.0.1 and 1.0.2, but with the following exception: 0.9.0
-and above can correctly decompress multiple concatenated
-compressed files.  0.1pl2 cannot do this; it will stop after
-decompressing just the first file in the stream.</para>
+<computeroutput>bzip2</computeroutput>.  Compressed data created by
+this version is entirely forwards and backwards compatible with the
+previous public releases, versions 0.1pl2, 0.9.0 and 0.9.5, 1.0.0,
+1.0.1, 1.0.2 and 1.0.3, but with the following exception: 0.9.0 and
+above can correctly decompress multiple concatenated compressed files.
+0.1pl2 cannot do this; it will stop after decompressing just the first
+file in the stream.</para>
 
 <para><computeroutput>bzip2recover</computeroutput> versions
 prior to 1.0.2 used 32-bit integers to represent bit positions in
@@ -819,8 +819,7 @@
 interface.</para>
 
 <para>Yoshioka Tsuneo
-(<computeroutput>QWF00133@niftyserve.or.jp</computeroutput> /
-<computeroutput>tsuneo-y@is.aist-nara.ac.jp</computeroutput>) has
+(<computeroutput>tsuneo@rr.iij4u.or.jp</computeroutput>) has
 contributed some functions to give better
 <computeroutput>zlib</computeroutput> compatibility.  These
 functions are <computeroutput>BZ2_bzopen</computeroutput>,
@@ -1352,7 +1351,7 @@
   output has been removed
     Next state = IDLE; Return value = BZ_STREAM_END
   else
-    Next state = FINISHING; Return value = BZ_FINISHING
+    Next state = FINISHING; Return value = BZ_FINISH_OK
 
 FINISHING/other
   Illegal.
@@ -2222,7 +2221,7 @@
    BZ2_bzReadClose ( &bzerror, b );
    /* handle error */
 } else {
-   BZ2_bzReadClose ( &bzerror );
+   BZ2_bzReadClose ( &bzerror, b );
 }
 </programlisting>
 
@@ -2537,8 +2536,7 @@
 
 <para>Everything related to Windows has been contributed by
 Yoshioka Tsuneo
-(<computeroutput>QWF00133@niftyserve.or.jp</computeroutput> /
-<computeroutput>tsuneo-y@is.aist-nara.ac.jp</computeroutput>), so
+(<computeroutput>tsuneo@rr.iij4u.or.jp</computeroutput>), so
 you should send your queries to him (but perhaps Cc: me,
 <computeroutput>&bz-email;</computeroutput>).</para>
 
diff --git a/mk251.c b/mk251.c
index 205778a..b56d420 100644
--- a/mk251.c
+++ b/mk251.c
@@ -5,6 +5,21 @@
    case, which is fixed in this version (1.0.2) and above.
 */
 
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
 #include <stdio.h>
 
 int main ()
diff --git a/randtable.c b/randtable.c
index 940462d..d186335 100644
--- a/randtable.c
+++ b/randtable.c
@@ -4,59 +4,19 @@
 /*---                                           randtable.c ---*/
 /*-------------------------------------------------------------*/
 
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
 
-  Copyright (C) 1996-2005 Julian R Seward.  All rights reserved.
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
 
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
 
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@bzip.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
 
 
 #include "bzlib_private.h"
diff --git a/spewG.c b/spewG.c
index 7934e76..e1f3032 100644
--- a/spewG.c
+++ b/spewG.c
@@ -9,6 +9,21 @@
    (but is otherwise harmless).
 */
 
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+	 ------------------------------------------------------------------ */
+
+
 #define _FILE_OFFSET_BITS 64
 
 #include <stdio.h>
diff --git a/unzcrash.c b/unzcrash.c
index f0f17fc..1f08a2e 100644
--- a/unzcrash.c
+++ b/unzcrash.c
@@ -8,11 +8,26 @@
    This should not cause any invalid memory accesses.  If it does, 
    I want to know about it!
 
-   p.s.  As you can see from the above description, the process is
+   PS.  As you can see from the above description, the process is
    incredibly slow.  A file of size eg 5KB will cause it to run for
    many hours.
 */
 
+/* ------------------------------------------------------------------
+   This file is part of bzip2/libbzip2, a program and library for
+   lossless, block-sorting data compression.
+
+   bzip2/libbzip2 version 1.0.4 of 20 December 2006
+   Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+
+   Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+   README file.
+
+   This program is released under the terms of the license contained
+   in the file LICENSE.
+   ------------------------------------------------------------------ */
+
+
 #include <stdio.h>
 #include <assert.h>
 #include "bzlib.h"
diff --git a/words0 b/words0
index 164a8ed..fbf442a 100644
--- a/words0
+++ b/words0
@@ -1,5 +1,9 @@
 
-If compilation produces errors, or a large number of warnings, 
+If compilation produces errors, or a large number of warnings,
 please read README.COMPILATION.PROBLEMS -- you might be able to
 adjust the flags in this Makefile to improve matters.
 
+Also in README.COMPILATION.PROBLEMS are some hints that may help
+if your build produces an executable which is unable to correctly
+handle so-called 'large files' -- files of size 2GB or more.
+
diff --git a/words2 b/words2
index 203ee39..caddcf4 100644
--- a/words2
+++ b/words2
@@ -1,5 +1,5 @@
 
 Checking test results.  If any of the four "cmp"s which follow
 report any differences, something is wrong.  If you can't easily
-figure out what, please let me know (jseward@acm.org).
+figure out what, please let me know (jseward@bzip.org).
 
diff --git a/words3 b/words3
index 7a6b462..6972669 100644
--- a/words3
+++ b/words3
@@ -1,22 +1,29 @@
 
-If you got this far and the "cmp"s didn't complain, it looks
+If you got this far and the 'cmp's didn't complain, it looks
 like you're in business.  
 
-To install in /usr/bin, /usr/lib, /usr/man and /usr/include, type
+To install in /usr/local/bin, /usr/local/lib, /usr/local/man and 
+/usr/local/include, type
+
    make install
+
 To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type 
+
    make install PREFIX=/xxx/yyy
+
 If you are (justifiably) paranoid and want to see what 'make install'
 is going to do, you can first do
+
    make -n install                      or
    make -n install PREFIX=/xxx/yyy      respectively.
+
 The -n instructs make to show the commands it would execute, but
 not actually execute them.
 
 Instructions for use are in the preformatted manual page, in the file
 bzip2.txt.  For more detailed documentation, read the full manual.  
 It is available in Postscript form (manual.ps), PDF form (manual.pdf),
-and HTML form (manual_toc.html).
+and HTML form (manual.html).
 
 You can also do "bzip2 --help" to see some helpful information. 
 "bzip2 -L" displays the software license.
diff --git a/xmlproc.sh b/xmlproc.sh
index 6fe4d57..5a1f051 100755
--- a/xmlproc.sh
+++ b/xmlproc.sh
@@ -1,5 +1,20 @@
 #!/bin/bash
-# see the README in this directory for usage etc.
+# see the README file for usage etc.
+#
+# ------------------------------------------------------------------
+#  This file is part of bzip2/libbzip2, a program and library for
+#  lossless, block-sorting data compression.
+#
+#  bzip2/libbzip2 version 1.0.4 of 20 December 2006
+#  Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
+#
+#  Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+#  README file.
+#
+#  This program is released under the terms of the license contained
+#  in the file LICENSE.
+# ----------------------------------------------------------------
+
 
 usage() {
   echo '';
@@ -45,7 +60,7 @@
 
 # post-processing tidy up
 cleanup() {
-  echo "Cleaning up: # $@" 
+  echo "Cleaning up: $@" 
   while [ $# != 0 ]
   do
     arg=$1; shift;