| 2011-04-27 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. |
| (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, |
| bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, |
| bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, |
| bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): |
| Likewise. |
| |
| 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. |
| (bfin_gpio_io_write_buffer): Store the current port state into |
| "data", and call bfin_gpio_forward_ouput when the data or dir |
| MMRs are updated. |
| (bfin_gpio_ports): Change p0..p15 to bidirect_port. |
| |
| 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. |
| (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. |
| (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the |
| mask a or mask b MMRs are written. |
| (bfin_gpio_port_event): When handling edge gpios, set the bit in |
| int_state, call bfin_gpio_forward_ints, and then clear the bit. |
| When handling level gpios, clear/set the bit in int_state rather |
| than returning immediately. Call bfin_gpio_forward_ints instead |
| of checking mask[ab] and calling HW_TRACE/hw_port_event directly. |
| |
| 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for |
| BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and |
| BYTEUNPACK. |
| (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, |
| BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. |
| |
| 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling |
| BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, |
| and BYTEUNPACK insns. |
| |
| 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_sic.c (bfin_sic_port_event): New helper function. |
| (bfin_sic_52x_port_event, bfin_sic_537_port_event, |
| bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level |
| in the trace output, and call the new bfin_sic_port_event func. |
| |
| 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. |
| |
| 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_otp.c (bfin_otp_ports): Declare. |
| (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate after common/aclocal.m4 changes. |
| |
| 2011-03-28 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 |
| and add to casted low 16bits of A0.L and store in val0. Cast high |
| 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and |
| store in val1. Delete bit checks of val0 and val1. |
| |
| 2011-03-26 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when |
| the result was 0x80000000 for RND12 subtraction. |
| |
| 2011-03-26 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every |
| major code flow point. |
| * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just |
| before calling hw_port_event on ourselves. |
| (bfin_sic_52x_port_event, bfin_sic_537_port_event, |
| bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE |
| at the start of the function. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. |
| Normalize "level" to 0/1 values. Shift "level" over by "my_port". |
| Invert port->both bit check. |
| |
| 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the |
| valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * TODO: Document some known SIC issues. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. |
| * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. |
| * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 |
| for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. |
| * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. |
| * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. |
| * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. |
| * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended |
| value for the VIT_MAX insn, and mask off the result when done. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, |
| and set A0 to a0_lo when up_lo is false. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of |
| saturate_s40, and use the v parameter to update the AV bit. Set the |
| AC bit only when the final result is 0. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. |
| (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, |
| bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, |
| bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): |
| Encode ids with the ENC macro. |
| (bfin_sic_52x_port_event, bfin_sic_537_port_event, |
| bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx |
| from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. |
| (bfin_sic_533_port_event): Delete. |
| (bfin_sic_finish): Call set_hw_port_event with |
| bfin_sic_537_port_event for BF533 and BF59x targets. |
| |
| 2011-03-23 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for |
| BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. |
| |
| 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, |
| bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): |
| Change bfin_gpio addresses from f/g/h to 5/6/7. |
| (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. |
| |
| 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using |
| kill or pread. |
| |
| 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (dv-bfin_gpio.o): New target. |
| * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. |
| * configure: Regenerate. |
| * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. |
| * machs.c: Include dv-bfin_gpio.h. |
| (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, |
| bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): |
| Delete GPIO memory stubs. |
| (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, |
| bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO |
| peripheral devices. |
| (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. |
| |
| 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, |
| bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, |
| bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, |
| bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, |
| bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, |
| bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, |
| bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, |
| bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, |
| bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, |
| dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, |
| dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, |
| dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, |
| dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, |
| dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, |
| dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, |
| dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, |
| linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds |
| and subs. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_macfunc): New neg parameter. Set when the |
| high bit is set after extract_mult. |
| (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc |
| functions. Use these to update the AN bit. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to |
| the extract_mult functions. Include these when updating the V, VS, |
| and V_COPY bits. |
| |
| 2011-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (astat_names): New global bit array. |
| (decode_CC2stat_0): Delete local astat_name and astat_names. |
| (decode_psedodbg_assert_0): Move hardcoded offset into a variable. |
| Print out ASTAT bit values when checking an ASTAT register. |
| |
| 2010-03-15 Robin Getz <robin.getz@analog.com> |
| |
| * bfin-sim.c (extract_mult): Handle M_IU. |
| |
| 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, |
| bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, |
| bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, |
| bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, |
| bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, |
| bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, |
| bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, |
| bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, |
| bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, |
| bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, |
| configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, |
| dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, |
| dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, |
| dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, |
| dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, |
| dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, |
| dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, |
| dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, |
| dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, |
| dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, |
| dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, |
| dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, |
| dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, |
| dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, |
| gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, |
| linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, |
| tconfig.in: New Blackfin port. |