| 2011-04-26 Andrew Gontarek <andrewg@cray.com> |
| |
| * valprint.c (val_print_array_elements): Fixed poor performance |
| of printing very large arrays with repeat_count_threshold set |
| to unlimited. New comment. |
| |
| 2011-04-29 Tom Tromey <tromey@redhat.com> |
| |
| * mi/mi-parse.c (mi_parse): Remove incorrect sizeof. |
| (mi_parse): Likewise. |
| * breakpoint.c (break_range_command): Use sizeof char*, not |
| char**. |
| (create_breakpoint): Likewise. |
| (parse_breakpoint_sals): Likewise. |
| |
| 2011-04-29 Pedro Alves <pedro@codesourcery.com> |
| |
| * linux-nat.c (linux_child_remove_fork_catchpoint) |
| (linux_child_remove_vfork_catchpoint) |
| (linux_child_remove_exec_catchpoint): New functions. |
| (linux_target_install_ops): Install them. |
| |
| 2011-04-29 Phil Muldoon <pmuldoon@redhat.com> |
| |
| PR mi/12531 |
| |
| * varobj.c (install_default_visualizer): Do not install a |
| visualizer if the varobj is CPLUS_FAKE_CHILD. |
| (construct_visualizer): Likewise. |
| |
| 2011-04-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symtab.c (expand_partial_symbol_name): New variable NCMP. Support |
| case insensitive comparison. |
| |
| 2011-04-28 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * infrun.c (proceed): Revert previous change. |
| (resume): Instead, handle the case of signal delivery while stepping |
| off a breakpoint location here, and only if software single-stepping |
| is used. Handle nested signals. |
| |
| 2011-04-28 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.c (copy_unmodified): Rename to ... |
| (arm_copy_unmodified): .. this. New. |
| (copy_preload): Move common part to ... |
| (install_preload): .. this. New. |
| (arm_copy_preload): New. |
| (copy_preload_reg): Move common part to ... |
| (install_preload_reg): ... this. New. |
| (arm_copy_preload_reg): New. |
| (copy_b_bl_blx): Move common part to ... |
| (install_b_bl_blx): .. this. New. |
| (arm_copy_b_bl_blx): New. |
| (copy_bx_blx_reg): Move common part to ... |
| (install_bx_blx_reg): ... this. New. |
| (arm_copy_bx_blx_reg): New. |
| (copy_alu_reg): Move common part to ... |
| (install_alu_reg): ... this. New. |
| (arm_copy_alu_reg): New. |
| (copy_alu_shifted_reg): Move common part to ... |
| (install_alu_shifted_reg): ... this. New. |
| (copy_ldr_str_ldrb_strb): Move common part to ... |
| (install_ldr_str_ldrb_strb): ... this. New. |
| (arm_copy_ldr_str_ldrb_strb): New. |
| (copy_copro_load_store): Move some common part to ... |
| (install_copy_copro_load_store): ... this. New. |
| (arm_copy_copro_load_store): New. |
| (copy_svc): Delete. |
| (arm_copy_svc): Renamed from copy_svc. |
| (copy_undef): Delete. |
| (arm_copy_undef): Renamed from copy_undef. |
| (decode_ext_reg_ld_st): Delete. |
| (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st. |
| (decode_svc_copro): Delete. |
| (arm_decode_svc_copro): Renamed from decode_svc_copro. |
| (copy_copro_load_store, copy_alu_imm): update callers. |
| (copy_extra_ld_st, copy_block_xfer): Likewise. |
| (decode_misc_memhint_neon, decode_unconditional): Likewise. |
| (decode_miscellaneous, decode_dp_misc): Likewise. |
| (decode_ld_st_word_ubyte, decode_media): Likewise. |
| (decode_b_bl_ldmstm, decode_ext_reg_ld_st): Likewise. |
| (decode_svc_copro, decode_misc_memhint_neon): Likewise. |
| (decode_unconditional, decode_miscellaneous): Likewise. |
| (decode_media, decode_b_bl_ldmstm): Likewise. |
| (arm_process_displaced_insn): Likewise.. |
| (decode_misc_memhint_neon): Delete. |
| (arm_decode_misc_memhint_neon): Renamed from decode_misc_memhint_neon. |
| (decode_miscellaneous): Delete. |
| (arm_decode_miscellaneous): Renamed from decode_miscellaneous. |
| (decode_dp_misc): Delete. |
| (arm_decode_dp_misc): Renamed from decode_dp_misc. |
| (decode_ld_st_word_ubyte): Delete. |
| (arm_decode_ld_st_word_ubyte): Renamed from decode_ld_st_word_ubyte. |
| (decode_media): Delete. |
| (arm_decode_media): Renamed from decode_media. |
| (decode_b_bl_ldmstm): Delete. |
| (arm_decode_b_bl_ldmstm): Renamed from decode_b_bl_ldmstm. |
| (decode_ext_reg_ld_st): Delete. |
| (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st. |
| (decode_unconditional): Delete. |
| (arm_decode_unconditional): Renamed from decode_unconditional. |
| |
| 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Case insensitive lookups implementation. |
| * dwarf2read.c: Include ctype.h. |
| (struct mapped_index): New field version. |
| (mapped_index_string_hash): New parameter index_version. New comment |
| for it. Call tolower appropriately. |
| (find_slot_in_mapped_hash): New variable cmp, initialize it, use it. |
| Choose the right index version for mapped_index_string_hash. |
| (dwarf2_read_index): Support also the index version 5. Initialize the |
| new struct mapped_index field version. |
| (hash_strtab_entry): Pass INT_MAX for the new parameter, explain why. |
| (find_slot): Explain the version needs. Pass INT_MAX for the new |
| parameter. |
| (write_psymtabs_to_index): Produce version 5. |
| * minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it, |
| use it. New comment for SYMBOL_MATCHES_SEARCH_NAME. |
| * psymtab.c (lookup_partial_symbol): Find the |
| SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching |
| entries. |
| * symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off |
| NAME lowercasing. |
| (search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off. |
| (completion_list_add_name): New variable ncmp, initialize it, use it. |
| * symtab.h (SYMBOL_HASH_NEXT): Always call tolower. |
| * utils.c (strcmp_iw): Support case_sensitive_off. |
| (strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off. |
| New function comment part. New variables saved_string1, |
| saved_string2 and case_pass. Add a proper second pass. |
| |
| 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Replace re_comp/re_exec by regcomp/regexec. |
| * symtab.c (struct search_symbols_data): New fields preg, preg_p. |
| (search_symbols_name_matches): Use them, use regexec. |
| (search_symbols): New variable retval_chain, adjust the use of |
| old_chain against it. Replace re_comp by regcomp. Use the new struct |
| search_symbols_data fields, use regexec instead of re_exec. |
| |
| 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Format the code for the next patch. |
| * dwarf2read.c (struct mapped_index): Include delimiting newlines. |
| * utils.c (strcmp_iw_ordered): Reformat the code for the next patch. |
| New variables c1 and c2. |
| |
| 2011-04-27 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * infrun.c (proceed): Do not single-step into signal delivery |
| when stepping off a breakpoint location. |
| (insert_step_resume_breakpoint_at_frame): Move prototype earlier. |
| (insert_step_resume_breakpoint_at_caller): Likewise. |
| (insert_step_resume_breakpoint_at_sal): Likewise. |
| (insert_longjmp_resume_breakpoint): Likewise. |
| |
| 2011-04-27 Yao Qi <yao@codesourcery.com> |
| |
| * common/linux-ptrace.h: Remove include <sys/wait.h>. |
| |
| 2011-04-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * procfs.c (procfs_pass_signals): Fix advance declaration. |
| |
| 2011-04-27 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * target.h (struct target_ops): Remove to_notice_signals; |
| add to_pass_signals. |
| (target_notice_signals): Remove. |
| (target_pass_signals): Add prototype. |
| * target.c (update_current_target): Remove to_notice_signals; |
| mention to_pass_signals. |
| (target_pass_signals): New function. |
| (debug_to_notice_signals): Remove. |
| (setup_target_debug): Do not install debug_to_notice_signals. |
| |
| * infrun.c (signal_pass): New global. |
| (resume): Call target_pass_signals. |
| (handle_inferior_event): Report all signals while stepping over |
| non-steppable watchpoint. Reset trap_expected to ensure breakpoints |
| are re-inserted when stepping over a signal handler. |
| (signal_cache_update): New function. |
| (signal_stop_update): Call it. |
| (signal_print_update): Likewise. |
| (signal_pass_update): Likewise. |
| (handle_command): Call signal_cache_update and target_pass_signals |
| instead of target_notice_signals. |
| (_initialize_infrun): Initialize signal_pass. |
| |
| * linux-nat.c (pass_mask): New global. |
| (linux_nat_pass_signals): New function. |
| (linux_nat_create_inferior): Report all signals initially. |
| (linux_nat_attach): Likewise. |
| (linux_nat_resume): Use pass_mask to decide whether to directly |
| handle an inferior signal. |
| (linux_nat_wait_1): Likewise. |
| (linux_nat_add_target): Install to_pass_signals callback. |
| |
| * nto-procfs.c (notice_signals): Remove. |
| (procfs_resume): Do not call notice_signals. |
| (procfs_notice_signals): Remove. |
| (procfs_pass_signals): New function. |
| (init_procfs_ops): Install to_pass_signals callback instead of |
| to_notice_signals callback. |
| (_initialize_procfs): Report all signals initially. |
| |
| * procfs.c (procfs_notice_signals): Remove. |
| (procfs_pass_signals): New function. |
| (procfs_target): Install to_pass_signals callback instead of |
| to_notice_signals callback. |
| (register_gdb_signals): Remove. |
| (procfs_debug_inferior): Report all signals initially. |
| (procfs_init_inferior): Remove redundant register_gdb_signals call. |
| |
| * remote.c (remote_pass_signals): Add numsigs and pass_signals |
| parameters; use them instead of calling signal_..._state routines. |
| (remote_notice_signals): Remove. |
| (remote_start_remote): Report all signals initially. |
| (remote_resume): Do not call remote_pass_signals. |
| (_initialize_remote): Install to_pass_signals callback instead of |
| to_notice_signals callback. |
| |
| 2011-04-27 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (user_settable_breakpoint): Delete. |
| (user_breakpoint_p): Remove check on user_settable_breakpoint. |
| (delete_command): Check user_breakpoint_p instead of looking at |
| the breakpoint's type. |
| (disable_command): Ditto. |
| (enable_command): Ditto. |
| (delete_trace_command): Use user_breakpoint_p instead of looking |
| at the breakpoint number directly. When checking if there are |
| user visible tracepoints, in order to know whether to ask the user |
| for confirmation, check whether the breakpoint is actually a |
| tracepoint. |
| |
| 2011-04-27 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * python/py-breakpoint.c (gdbpy_breakpoint_created): Fix |
| compilation. |
| |
| 2011-04-27 Vladimir Prus <vladimir@codesourcery.com> |
| |
| MI breakpoint notifications. |
| |
| * annotate.c (breakpoint_changed): Adjust parameter type. |
| * breakpoint.c (set_breakpoint_condition): Adjust to change |
| in breakpoint_modified type. |
| (breakpoint_set_commands): Likewise. |
| (do_map_commands_command): Likewise. |
| (bpstat_check_breakpoint_conditions): Notify that breakpoint has |
| changed after bumping hit count. |
| (bpstat_stop_status): Likewise. |
| (print_one_breakpoint_location): Don't wrap in tuple here. |
| (print_one_breakpoint): Always print individual locations. |
| For locations, use unnamed tuple. |
| (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint |
| has changed. |
| (create_catchpoint, create_syscall_event_catchpoint): Call |
| breakpoint_created obsever. |
| (mention): Don't call breakpoint_created observer. |
| (create_breakpoint_sal): Call breakpoint_created observer. |
| (create_breakpoint, watch_command_1): Likewise. |
| (create_ada_exception_breakpoint): Likewise. |
| (delete_breakpoint): Call breakpoint_deleted breakpoint. |
| (locations_are_equal): New. |
| (update_breakpoint_locations): If locations were changed, notify. |
| (set_ignore_count, disable_breakpoint, do_enable_breakpoint): |
| Call breakpoint_modified observer. |
| |
| * mi/mi-cmd-break.c (breakpoint_notify): Adjust. |
| (mi_cmd_break_insert): Don't set observers for modify and delete. |
| * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New. |
| (mi_breakpoint_created, mi_breakpoint_deleted) |
| (mi_breakpoint_modified): New. |
| (mi_interpreter_init): Hook the above. |
| * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications |
| while -break-* commands are executing. |
| * mi/mi-main.h (mi_suppress_breakpoint_notifications): New. |
| * mi/mi-out.c (struct ui_out_data): New field original_buffer. |
| (mi_redirect): New. |
| (mi_ui_out_impl): Hook in mi_redirect. |
| (mi_field_skip): True to the name, skip the field, don't output |
| a field with an empty value. |
| |
| * python/py-breakpoint.c (gdbpy_breakpoint_created) |
| (gdbpy_breakpoint_deleted): Adjust. |
| * tui/tui-hooks.c (tui_event_create_breakpoint) |
| (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust. |
| |
| 2011-04-26 Aleksandar Ristovski <aristovski@qnx.com> |
| |
| * nto-procfs.c (procfs_insert_hw_watchpoint): Fix prototype. |
| (procfs_remove_hw_watchpoint): Likewise. |
| |
| 2011-04-26 Michael Walle <michael@walle.cc> |
| |
| * remote.c (remote_start_remote): Ack packet after sending the |
| interrupt sequence. |
| |
| 2011-04-26 Yao Qi <yao@codesourcery.com> |
| |
| * linux-nat.c: Move common macros to ... |
| Include linux-ptrace.h. |
| * common/linux-ptrace.h: ... here. New. |
| |
| 2011-04-25 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by |
| !objfile_has_partial_symbols. New comment. |
| * objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if |
| SYM_READ_PSYMBOLS is not present. Extend the comment. |
| * symfile.h (struct sym_fns): Extend the sym_read_psymbols comment. |
| |
| 2011-04-25 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * defs.h (ENUM_BITFIELD): Remove. |
| |
| 2011-04-24 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Eli Zaretskii <eliz@gnu.org> |
| |
| * NEWS: Document the new gdbserver --once option. |
| |
| 2011-04-21 Jie Zhang <jzhang918@gmail.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2011-04-21 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * gdb_wchar.h (USE_INTERMEDIATE_ENCODING_FUNCTION): New macro. |
| (INTERMEDIATE_ENCODING): Change value to intermediate_encoding |
| function call if __STDC_ISO_10646__ macro is defined. |
| (intermediate_encoding): New prototype. |
| * charset.c (your_gdb_wchar_t_is_bogus): New extern test variable |
| to generate compile time error for unsupported gdb_wchar_t size. |
| (ENDIAN_SUFFIX): New macro. |
| (intermediate_encoding): New function. |
| |
| 2011-04-20 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * ada-lang.c (struct add_partial_datum): Update the comment for |
| expand_partial_symbol_name. |
| (ada_add_partial_symbol_completions): Rename to ... |
| (ada_expand_partial_symbol_name): ... here, change return type, update |
| function comment, call symbol_completion_match instead of |
| symbol_completion_add. |
| (ada_make_symbol_completion_list): Use now expand_partial_symbol_names |
| and ada_expand_partial_symbol_name. |
| * dwarf2read.c (dw2_expand_symtabs_matching): Support NULL |
| FILE_MATCHER. |
| (dw2_map_symbol_names): Remove. |
| (dwarf2_gdb_index_functions): Unlist dw2_map_symbol_names. |
| * psymtab.c (map_symbol_names_psymtab): Remove. |
| (expand_symtabs_matching_via_partial): Support NULL FILE_MATCHER. |
| Support KIND == ALL_DOMAIN. Exchange the NAME_MATCHER and KIND check |
| order. |
| (psym_functions): Unlist map_symbol_names_psymtab. |
| (map_partial_symbol_names): Rename to ... |
| (expand_partial_symbol_names): ... here, change the FUN type, call |
| expand_symtabs_matching with ALL_DOMAIN and NULL FILE_MATCHER now. |
| * psymtab.h (map_partial_symbol_names): Rename to ... |
| (expand_partial_symbol_names): ... here, change the FUN type. |
| * symfile.h (struct quick_symbol_functions): Update the description of |
| expand_symtabs_matching. Remove map_symbol_names. |
| * symtab.c (search_symbols): Add ALL_DOMAIN to the function comment. |
| (struct add_name_data): Update the comment for |
| expand_partial_symbol_name. |
| (add_partial_symbol_name): Rename to ... |
| (expand_partial_symbol_name): ... here. Replace |
| completion_list_add_name call by strncmp. |
| (default_make_symbol_completion_list_break_on): Use now |
| expand_partial_symbol_names and expand_partial_symbol_name. |
| * symtab.h (enum search_domain): New element ALL_DOMAIN. |
| |
| 2011-04-20 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (save_gdb_index_command): Replace format |
| documentation with a pointer to the manual. |
| |
| 2011-04-20 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c: Include remote.h. |
| (enum regcache_dump_what) <regcache_dump_remote>: New enum value. |
| (regcache_dump): Handle regcache_dump_remote. |
| (maintenance_print_remote_registers): New function. |
| (_initialize_regcache): Install "maint print remote-registers" |
| command. |
| * remote.c (map_regcache_remote_table): New function, factored out |
| from ... |
| (init_remote_state): ... here. |
| (remote_register_number_and_offset): New. |
| * remote.h (remote_register_number_and_offset): Declare. |
| |
| 2011-04-20 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (get_thread_arch_regcache): If creating a regcache for |
| null_ptid, assume and allow a NULL address space, instead of |
| asking the target for the ptid's address space. |
| * infrun.c (ptid_is_pid): Remove assertion. |
| |
| 2011-04-19 Tom Tromey <tromey@redhat.com> |
| |
| * windows-tdep.c (windows_xfer_shared_library): |
| * windows-nat.c (get_module_name, windows_make_so): |
| * v850-tdep.c (v850_handle_pushm): |
| * utils.c (null_cleanup, gdb_realpath): |
| * ui-out.c (get_next_header): |
| * tracepoint.c (clear_traceframe_info): |
| * symtab.c (lookup_symtab): |
| * serial.h (struct serial_ops): |
| * mipsread.c (read_alphacoff_dynamic_symtab): |
| * infcmd.c (print_return_value): |
| * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): |
| * f-exp.y (parse_number): |
| * exceptions.c (catch_exceptions): |
| * dummy-frame.c (dummy_frame_this_id): |
| * defs.h (struct cleanup): |
| * breakpoint.c (disable_breakpoints_in_unloaded_shlib): |
| * arm-tdep.c (arm_push_dummy_call): |
| * amd64-tdep.h (amd64_collect_xsave): |
| * amd64-tdep.c (amd64_collect_xsave): |
| * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): |
| * README (typing): Remove duplicate words. |
| * cli/cli-decode.c (lookup_cmd_composition): Add comma. |
| * infrun.c (siginfo_value_read): Fix typo. |
| * solib-frv.c (frv_fdpic_find_global_pointer): Likewise. |
| * top.c (source_line_number): Add comma. |
| |
| 2011-04-19 Marc Khouzam <marc.khouzam@ericsson.com> |
| |
| * thread.c (any_live_thread_of_process): Prioritize threads |
| that are not executing. |
| * gdbthread.h (any_live_thread_of_process): Update comment |
| as per above change. |
| |
| 2011-04-19 Andreas Schwab <schwab@linux-m68k.org> |
| |
| * xcoffread.c (process_xcoff_symbol): Remove useless cast. |
| (scan_xcoff_symtab): Likewise. |
| |
| 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * xcoffread.c (process_xcoff_symbol): ARI fix: Avoid assignment |
| inside if clause. |
| |
| 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr> |
| Pedro Alves <pedro@codesourcery.com> |
| |
| * xstormy16-tdep.c (xstormy16_push_dummy_call): Add local |
| variables to simplify code and avoid == operator at end of |
| line as this is against GNU coding standards. |
| |
| 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * solib-svr4.c (svr4_keep_data_in_core): Rename local variable |
| lm_name to name_lm to avoid conflict with lm_name function. |
| |
| 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| ARI fixes: Use only lowercase function name for static functions. |
| * nto-tdep.c (LM_ADDR): Rename to... |
| (lm_addr): New function name. |
| (nto_relocate_section_addresses): Adapt to change above. |
| * solib-sunos.c (LM_ADDR): Rename to... |
| (lm_addr): New function name. |
| (LM_NEXT): Rename to... |
| (lm_next): New function name. |
| (sunos_current_sos, sunos_relocate_section_addresses): Adapt to |
| function name changes above. |
| * solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to... |
| (lm_addr_from_link_map): New function name. |
| (HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to... |
| (has_lm_dynamic_from_link_map): New function name. |
| (LM_DYNAMIC_FROM_LINK_MAP): Rename to... |
| (lm_dynamic_from_link_map): New function name. |
| (LM_ADDR_CHECK): Rename to... |
| (lm_addr_check): New function name. |
| (LM_NEXT): Rename to... |
| (lm_next): New function name. |
| (LM_PREV): Rename to... |
| (lm_prev): New function name. |
| (LM_NAME): Rename to... |
| (lm_name): New function name. |
| (IGNORE_FIRST_LINK_MAP_ENTRY): Rename to... |
| (ignore_first_link_map_entry): New function name. |
| (svr4_keep_data_in_core): Adapt to function name changes above. |
| (svr4_current_sos): Likewise. |
| (enable_break): Likewise. |
| (svr4_relocate_section_addresses): Likewise. |
| |
| 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| ARI cleanup. |
| * xtensa-tdep.c (xtensa_register_type): Use xstrprintf instead of |
| sprintf. Simplify code and avoid loosing memory. |
| (xtensa_register_reggroup_p): Extract assignment out of IF clause. |
| (call0_frame_cache): Remove && operator from end of line. |
| |
| 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix libraries displacement if they change whether they were prelinked. |
| * solib-svr4.c (LM_ADDR_CHECK): Set L_ADDR even if the DYNAMIC pointer |
| does not match. Comment why. |
| |
| 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * corelow.c: Include wrapper.h. |
| (core_open): Call now gdb_target_find_new_threads. |
| * wrapper.c: Include target.h. |
| (gdb_target_find_new_threads): New. |
| * wrapper.h (gdb_target_find_new_threads): New declaration. |
| |
| 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * linux-thread-db.c (find_new_threads_callback): Exit on zero TI_TID |
| even if !TARGET_HAS_EXECUTION. |
| |
| 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip. |
| * elfread.c (elf_symfile_read): New variable synth_abfd, pass it to |
| bfd_get_synthetic_symtab. |
| * jit.c (jit_register_code): Pass NULL to the new parameter parent. |
| * machoread.c (macho_add_oso_symfile): Pass main_objfile to the new |
| parameter parent, remove the call to add_separate_debug_objfile. |
| * solib.c (solib_read_symbols): Pass NULL to the new parameter parent. |
| * symfile-mem.c (symbol_file_add_from_memory): Likewise. |
| * symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter |
| parent, new comment for it, call add_separate_debug_objfile for it. |
| (symbol_file_add_separate): Pass objfile as the parameter parent, |
| remove the call to add_separate_debug_objfile. |
| (symbol_file_add_from_bfd): New parameter parent, pass it. |
| (symbol_file_add): Pass NULL to the new parameter parent. |
| * symfile.h (symbol_file_add_from_bfd): New parameter parent. |
| |
| 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * elfread.c (elf_symtab_read): Do not ignore .L symbols if they are |
| BSF_SYNTHETIC. |
| |
| 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix Python access to inlined frames. |
| * python/py-frame.c (frapy_read_var): Find BLOCK using get_frame_block. |
| * python/py-symbol.c (gdbpy_lookup_symbol): Likewise. |
| |
| 2011-04-15 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (add_index_entry): Use VEC_last, not VEC_length. |
| |
| 2011-04-15 Gary Benson <gbenson@redhat.com> |
| |
| * MAINTAINERS: Add myself to write-after-approval section. |
| |
| 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * remote-sim.c (sim_command_completer): New function. |
| (_initialize_remote_sim): Set completer to sim_command_completer. |
| |
| 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (print_exception_catchpoint): Rename to ... |
| (print_it_exception_catchpoint): ... this. |
| (gnu_v3_exception_catchpoint_ops): Update with new name |
| for print_it_exception_catchpoint. |
| |
| 2011-04-13 Edjunior Machado <emachado@linux.vnet.ibm.com> |
| |
| * MAINTAINERS: Add myself for write after approval privileges. |
| |
| 2011-04-13 Marek Polacek <mpolacek@redhat.com> |
| |
| * MAINTAINERS: Add myself as a write-after-approval maintainer. |
| |
| 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (watch_command_1): Remove colon from exp_string. |
| |
| 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (save_breakpoints): Verify whether |
| breakpoint_ops.print_recreate is defined before calling it. |
| |
| 2011-04-11 Gary Benson <gbenson@redhat.com> |
| |
| Fix failure with --enable-maintainer-mode. |
| * Makefile.in (aclocal_m4_deps): Updated gnulib dependencies. |
| |
| 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Code cleanup. |
| * symtab.c (search_symbols): Reorder the KIND description in the |
| function comment. Remove the unused 4th element of types, types2, |
| types3 and types4. New gdb_assert on KIND. |
| (symtab_symbol_info): Remove the unused 4th element of classnames. |
| New gdb_assert on KIND. |
| * symtab.h (enum search_domain): New warning in the enum comment. |
| Assign numbers to the elements VARIABLES_DOMAIN, FUNCTIONS_DOMAIN and |
| TYPES_DOMAIN. |
| |
| 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix crash of gdb save-index on a STABS file. |
| * dwarf2read.c (write_psymtabs_to_index): Return also on no |
| PSYMTABS_ADDRMAP. |
| |
| 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix DW_AT_accessibility compatibility with gcc-4.6+. |
| * dwarf2read.c: Include ctype.h. |
| (producer_is_gxx_lt_4_6, dwarf2_default_access_attribute): New |
| functions. |
| (dwarf2_add_field): Fix new_field->accessibility by calling |
| dwarf2_default_access_attribute. Restructure setting accessibility |
| vs. virtuality. |
| (dwarf2_add_member_fn): New variable accessibility. Fix fnp |
| is_private and is_protected by calling |
| dwarf2_default_access_attribute. |
| |
| 2011-04-08 Kevin Buettner <kevinb@redhat.com> |
| |
| * rx-tdep.c (rx_frame_unwind): Add default_frame_unwind_stop_reason |
| to the initialization. |
| |
| 2011-04-08 Steve Ellcey <sje@cup.hp.com> |
| |
| * Add default_frame_unwind_stop_reason value to libunwind_frame_unwind |
| initalization. |
| |
| 2011-04-07 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Remove support for old Cygwin 1.5 versions. |
| * remote-fileio.c: Remove macros used to emulate new cygwin_conv_path |
| function on old Cygwin version. |
| * windows-nat.c: Remove cygwin version check and always define |
| __USEWIDE for Cygwin compilation. |
| |
| 2011-04-07 Yao Qi <yao@codesourcery.com> |
| |
| * arm-linux-tdep.c (arm_linux_copy_svc): Remove parameters INSN |
| and TO. |
| * arm-tdep.c (cleanup_svc): Handle variable instruction size. |
| (arm_copy_svc): Remove parameters INSN and TO. |
| (decode_svc_copro): Update caller. |
| * arm-tdep.h (struct displaced_step_closure): Remove parameters |
| from function pointer `copy_svc_os'. |
| |
| 2011-04-07 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.c (cleanup_branch): Set a correct return address in |
| LR for ARM and Thumb. |
| |
| 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Code cleanup. |
| * dictionary.c (dict_hash): Use SYMBOL_HASH_NEXT. |
| * dwarf2read.c (mapped_index_string_hash): Refer to SYMBOL_HASH_NEXT |
| in the function comment, a new note on values compatibility. |
| * minsyms.c (msymbol_hash_iw, msymbol_hash): Use SYMBOL_HASH_NEXT. |
| * symtab.h (SYMBOL_HASH_NEXT): New. |
| |
| 2011-04-06 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-linux-nat.c (check_condition): Add len output parameter. |
| Set it based on the memory region referenced in the condition |
| expression. Update all callers. |
| |
| 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix crash regression on systems featuring .gdb_index. |
| * objfiles.c (free_objfile): Move the |
| forget_cached_source_info_for_objfile call earlier. Comment it. |
| Extend the comment for objfile_free_data. |
| |
| 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix regression of displaying the debug format. |
| * buildsym.c (end_symtab): Set symtab's debugformat and producer from |
| subfile. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * cli/cli-interp.c (struct captured_execute_command_args): |
| Remove. |
| (do_captured_execute_command): Remove. |
| (safe_execute_command): Use TRY_CATCH. |
| * cli/cli-script.c (struct wrapped_read_command_file_args): |
| Remove. |
| (wrapped_read_command_file): Remove. |
| (script_from_file): Use TRY_CATCH. |
| * exceptions.c (catch_exception): Remove. |
| * exceptions.h (catch_exception): Remove. |
| (deprecated_throw_reason): Update comment. |
| * mi/mi-main.c (captured_mi_execute_command): Change 'data' |
| argument to 'context'. |
| (mi_execute_command): Use TRY_CATCH. |
| * remote.c (struct start_remote_args): Remove. |
| (remote_start_remote): Update; change arguments. |
| (remote_open_1): Use TRY_CATCH. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * tracepoint.c (scope_info): Update. |
| * symtab.c (decode_line_spec): Update. |
| * python/python.c (gdbpy_decode_line): Update. |
| * linespec.h (decode_line_1): Update. |
| * linespec.c (decode_line_1): Remove 'not_found_ptr' argument. |
| (decode_compound, find_method, symtab_from_filename) |
| (decode_variable): Likewise. |
| * cli/cli-cmds.c (edit_command): Update. |
| (list_command): Update. |
| * breakpoint.c (parse_breakpoint_sals): Remove 'not_found_ptr' |
| argument. |
| (create_breakpoint): Update. |
| (until_break_command): Update. |
| (addr_string_to_sals): Update. |
| (decode_line_spec_1): Update. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * breakpoint.c (struct captured_parse_breakpoint_args): Remove. |
| (do_captured_parse_breakpoint): Remove. |
| (create_breakpoint): `e' is now volatile. Remove `parse_args'. |
| Use TRY_CATCH directly. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * symtab.h (free_symtab): Remove. |
| (forget_cached_source_info_for_objfile): Declare. |
| * symmisc.c (free_symtab): Remove. |
| * source.c (forget_cached_source_info_for_objfile): New function. |
| (forget_cached_source_info): Use it. |
| * objfiles.c (free_objfile): Simplify check before calling |
| clear_current_source_symtab_and_line. Call |
| forget_cached_source_info_for_objfile. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * mdebugread.c (psymtab_to_symtab_1): Copy linetable to obstack. |
| (new_symtab): Don't set `free_code' on symtab. |
| (new_linetable): Properly handle size==0. |
| * symtab.h (struct symtab) <free_code, free_func>: Remove. |
| * symmisc.c (free_symtab): Don't free the linetable. Don't call |
| free_func. |
| * jv-lang.c (struct jv_per_objfile_data): New. |
| (jv_per_objfile_free): Free the data. |
| (get_dynamics_objfile): Allocate a jv_per_objfile_data. |
| (get_java_class_symtab): Set the `dict' field on the |
| jv_per_objfile_data. |
| (free_class_block): Remove. |
| * buildsym.c (end_symtab): Don't set `free_code' or `free_func' on |
| the symtab. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * symfile.c (reread_symbols): Update. |
| * objfiles.h (struct objfile) <cp_namespace_symtab>: Remove |
| field. |
| * objfiles.c (allocate_objfile): Update. |
| * cp-support.h (cp_check_possible_namespace_symbols): Don't |
| declare. |
| * cp-namespace.c (lookup_symbol_file): Don't call |
| lookup_possible_namespace_symbol. |
| (initialize_namespace_symtab, get_possible_namespace_block) |
| (free_namespace_block, cp_check_possible_namespace_symbols) |
| (check_possible_namespace_symbols_loop) |
| (check_one_possible_namespace_symbol) |
| (lookup_possible_namespace_symbol): Remove. |
| (maintenance_cplus_namespace): Replace with notice. |
| (_initialize_cp_namespace): Deprecate `maint cplus namespace'. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * xcoffread.c (read_xcoff_symtab): Make `debugfmt' const. |
| * symtab.h (struct symtab) <producer, debugformat>: Now const. |
| * symmisc.c (free_symtab): Don't free debugformat. |
| * buildsym.h (struct subfile) <producer, debugformat>: Now const. |
| (record_debugformat, record_producer): Document. |
| * buildsym.c (end_symtab): Don't save debugformat and producer |
| names on obstack. |
| (end_symtab): Don't free debugformat and producer fields. |
| (record_debugformat): Don't call xstrdup. |
| (record_producer): Likewise. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * source.c (find_source_lines): Remove LSEEK_NOT_LINEAR code. |
| (source_line_charpos, source_charpos_line): Remove. |
| |
| 2011-04-04 Tom Tromey <tromey@redhat.com> |
| |
| * symtab.h (domain_enum): Split in two... |
| (enum search_domain): New. |
| (search_symbols): Update. |
| * symtab.c (print_symbol_info, symtab_symbol_info): Remove |
| redundant declarations. |
| (search_symbols): Change 'kind' argument to search_domain. |
| Update. |
| (print_symbol_info): Likewise. |
| (symtab_symbol_info): Likewise. |
| * symfile.h (struct quick_symbol_functions) |
| <pre_expand_symtabs_matching>: Change type of 'kind' argument. |
| <expand_symtabs_matching>: Likewise. |
| * psymtab.c (pre_expand_symtabs_matching_psymtabs): Update. |
| (expand_symtabs_matching_via_partial): Update. |
| * dwarf2read.c (dw2_pre_expand_symtabs_matching): Update. |
| (dw2_expand_symtabs_for_function): Update. |
| * block.h: Moved anonymous enum... |
| * defs.h (enum block_enum): ... here. Now named. |
| |
| 2011-04-03 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.3 branch created (branch timestamp: 2011-04-01 01:00 UTC) |
| * version.in: Bump version to 7.3.50.20110403-cvs. |
| |
| 2011-04-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Create a new section for the next release branch. |
| Rename the section of the current branch, now that it has |
| been cut. |
| |
| 2011-04-01 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c (arm_gdbarch_init): Enfore correct register number |
| for "fpscr" in target description. |
| |
| 2011-04-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (find_slot_in_mapped_hash): New variable back_to, |
| initialize it. Delay HASH initialization. Strip the part after open |
| parenthesis for languages with qualifiers. Call do_cleanups. |
| |
| 2011-04-01 Tom Tromey <tromey@redhat.com> |
| |
| * utils.c (report_command_stats): Don't print `-' for negative |
| number. |
| |
| 2011-04-01 Eric Botcazou <ebotcazou@adacore.com> |
| |
| * ada-lang.c (ada_is_simple_array_type, ada_value_slice_from_ptr) |
| (ada_value_slice, empty_array, to_fixed_array_type): Deal with |
| typedefs. |
| |
| 2011-04-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * breakpoint.h (bpdisp_text): Add declaration. |
| * breakpoint.c (bpdisp_text): Make non-static. |
| * ada-lang.c: #include "mi/mi-common.h". |
| (print_it_exception): Rewrite to improve GDB/MI output. |
| |
| 2011-04-01 Pedro Alves <pedro@codesourcery.com> |
| |
| * arm-tdep.h (struct address_space): Add forward declaration. |
| |
| 2011-04-01 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.h (arm_insert_single_step_breakpoint): Add prototype. |
| * arm-tdep.c (arm_override_mode): New global. |
| (arm_pc_is_thumb): Respect arm_override_mode. Remove single-step |
| execution mode heuristics. |
| (thumb_get_next_pc_raw): Remove INSERT_BKTP argument; always insert |
| second single-step breakpoint if needed, using |
| arm_insert_single_step_breakpoint. |
| (arm_get_next_pc_raw): Remove INSERT_BKTP argument. Only handle |
| ARM execution mode, do not call thumb_get_next_pc_raw. |
| (arm_get_next_pc): Encode execution mode in return value. Call |
| either arm_get_next_pc_raw or thumb_get_next_pc_raw. |
| (arm_insert_single_step_breakpoint): New function. |
| (arm_software_single_step): Call it. |
| * arm-linux-tdep.c (arm_linux_sigreturn_return_addr): Add IS_THUMB |
| argument to return execution mode of sigreturn target. |
| (arm_linux_syscall_next_pc): Use it. |
| (arm_linux_copy_svc): Update call. |
| (arm_linux_software_single_step): Call |
| arm_insert_single_step_breakpoint. |
| |
| 2011-03-31 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (dwarf2_read_index): Fix .gdb_index version number in |
| the comment. |
| |
| 2011-03-31 Tom Tromey <tromey@redhat.com> |
| |
| * varobj.c (update_dynamic_varobj_children): Properly handle |
| errors from iterator. |
| |
| 2011-03-31 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (dwarf2_name): Initialize DEMANGLED. Avoid demangling |
| struct linkage name twice. |
| |
| 2011-03-31 Tom Tromey <tromey@redhat.com> |
| |
| * python/py-prettyprint.c (print_stack_unless_memory_error): Add |
| missing ">" to message. |
| |
| 2011-03-31 Tom Tromey <tromey@redhat.com> |
| |
| * varobj.c (instantiate_pretty_printer): Remove duplicate |
| 'return'. |
| |
| 2011-03-31 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * i386-tdep.c (i386_frame_prev_register): Unwind SP from memory |
| if neither saved value nor register available (e.g. signal frame). |
| |
| 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * macroexp.c (expand): Avoid uninitialized variable |
| compiler warning. |
| |
| 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (break_range_command): Fix typo in comment. |
| |
| 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com> |
| |
| Implement support for PowerPC BookE ranged breakpoints. |
| * NEWS: Mention support for ranged breakpoints on embedded PowerPC. |
| * breakpoint.h (struct bp_target_info) <length>: New member |
| variable. |
| (struct breakpoint_ops) <breakpoint_hit>: Take struct bp_location |
| instead of struct breakpoint as argument, and also add ASPACE |
| and BP_ADDR arguments. Update all callers. |
| (struct breakpoint_ops) <print_one_detail>: New method. |
| (struct breakpoint) <addr_string_range_end>: New member variable. |
| * breakpoint.c (breakpoint_location_address_match): Add function |
| prototype. |
| (insert_bp_location): Set bl->target_info.length. |
| (breakpoint_here_p): Call breakpoint_location_address_match. |
| (moribund_breakpoint_here_p): Likewise. |
| (regular_breakpoint_inserted_here_p): Likewise. |
| (breakpoint_thread_match): Likewise. |
| (bpstat_stop_status): Likewise. |
| (bpstat_check_location): Move call to |
| breakpoint_ops.breakpoint_hit to the top. |
| (print_one_breakpoint_location): Call |
| breakpoint_ops.print_one_detail if available. |
| (breakpoint_address_match_range): New function. |
| (breakpoint_location_address_match): Likewise. |
| (breakpoint_locations_match): Compare the length field of the |
| locations too. |
| (hw_breakpoint_used_count): Count resources used by all locations |
| in a breakpoint, and use breakpoint_ops.resources_needed if |
| available. |
| (breakpoint_hit_ranged_breakpoint): New function. |
| (resources_needed_ranged_breakpoint): Likewise. |
| (print_it_ranged_breakpoint): Likewise. |
| (print_one_ranged_breakpoint): Likewise. |
| (print_one_detail_ranged_breakpoint): Likewise. |
| (print_mention_ranged_breakpoint): Likewise. |
| (print_recreate_ranged_breakpoint): Likewise. |
| (ranged_breakpoint_ops): New structure. |
| (find_breakpoint_range_end): New function. |
| (break_range_command): Likewise. |
| (delete_breakpoint): Free addr_string_range_end. |
| (update_breakpoint_locations): Add SALS_END argument. Update |
| all callers. Calculate breakpoint length if a non-zero SALS_END |
| is given. Call breakpoint_locations_match instead of |
| breakpoint_address_match. |
| (reset_breakpoint): Find SaL of the end of the range if B is a |
| ranged breakpoint. |
| (_initialize_breakpoint): Register break-range command. |
| * defs.h (print_core_address): Add function prototype. |
| * ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New |
| function. |
| (ppc_linux_insert_hw_breakpoint): Support ranged breakpoints. |
| (ppc_linux_remove_hw_breakpoint): Likewise. |
| (_initialize_ppc_linux_nat): Initialize |
| to_ranged_break_num_registers. |
| * target.c (update_current_target): Add comment about |
| to_ranged_break_num_registers. |
| (target_ranged_break_num_registers): New function. |
| * target.h (struct target_ops) <to_ranged_break_num_registers>: |
| New method. |
| (target_ranged_break_num_registers): Add function prototype. |
| * ui-out.c (ui_out_field_core_addr): Move address-printing logic to ... |
| * utils.c (print_core_address): ... here. |
| |
| 2011-03-31 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * breakpoint.c (addr_string_to_sals): Avoid uninitialized |
| variable compiler warning. |
| |
| 2011-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (breakpoint_re_set_one): Factor out breakpoint-resetting |
| code from here ... |
| (re_set_breakpoint): ... to here ... |
| (addr_string_to_sals): ... and here. |
| |
| 2011-03-29 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * Makefile.in (SFILES): Add missing C sources. |
| (HFILES_NO_SRCDIR): Remove gdbserver subdirectory headers. |
| Add missing headers. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * .gitignore: New file. |
| |
| 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| |
| * NEWS: Mention new cfi device simulation. |
| |
| 2011-03-29 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (fixup_partial_die): Handle linkage name on |
| otherwise anonymous types. |
| (dwarf2_name): Likewise. |
| * valops.c (value_struct_elt_for_reference): Refine artificial |
| type logic. Call error if j==-1. |
| |
| 2011-03-29 Andreas Tobler <andreast-list@fgznet.ch> |
| |
| Fix false GCC warning. |
| * infcall.c (find_function_addr): Initialize funaddr. |
| |
| 2011-03-29 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Fix mingw compilation with --enable-targets=all. |
| * remote-mips.c (gdb_usleep.h): Include header. |
| (mips_enter_debug): Use gdb_usleep instead of sleep. |
| |
| 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Support resolution of STT_GNU_IFUNC via breakpoints. |
| * breakpoint.c (print_it_typical): Support bp_gnu_ifunc_resolver and |
| bp_gnu_ifunc_resolver_return. |
| (bpstat_what): Rename parameter to bs_head, new variable bs, adjust |
| the loop. Support bp_gnu_ifunc_resolver and |
| bp_gnu_ifunc_resolver_return. New comment after the loop. New loop |
| for bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return |
| breakpoints. |
| (bptype_string, print_one_breakpoint_location): Support |
| bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return. |
| (user_settable_breakpoint): Return true also for |
| bp_gnu_ifunc_resolver. |
| (allocate_bp_location): Support bp_gnu_ifunc_resolver and |
| bp_gnu_ifunc_resolver_return. |
| (set_breakpoint_location_function): New parameter explicit_loc, |
| describe it. Call find_pc_partial_function_gnu_ifunc with new |
| variable IS_GNU_IFUNC and adjust the address for STT_GNU_IFUNC if |
| EXPLICIT_LOC is not set. |
| (set_raw_breakpoint): Set EXPLICIT_LOC for |
| set_breakpoint_location_function. |
| (clone_momentary_breakpoint): Use true for EXPLICIT_LOC of |
| set_breakpoint_location_function. |
| (mention): Support bp_gnu_ifunc_resolver and |
| bp_gnu_ifunc_resolver_return. |
| (add_location_to_breakpoint): Set EXPLICIT_LOC for |
| set_breakpoint_location_function. |
| (update_breakpoint_locations): Remove static. |
| (breakpoint_re_set_one): Support bp_gnu_ifunc_resolver and |
| bp_gnu_ifunc_resolver_return. |
| * breakpoint.h (enum bptype): New fields bp_gnu_ifunc_resolver and |
| bp_gnu_ifunc_resolver_return. |
| (update_breakpoint_locations): New declaration. |
| * elfread.c: Include gdbthread.h and regcache.h. |
| (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): New |
| functions. |
| (elf_gnu_ifunc_fns): Install them. |
| * minsyms.c (stub_gnu_ifunc_resolver_stop) |
| (stub_gnu_ifunc_resolver_return_stop): New functions. |
| (stub_gnu_ifunc_fns): Install them. |
| * symtab.h (struct gnu_ifunc_fns): New fields gnu_ifunc_resolver_stop |
| and gnu_ifunc_resolver_return_stop. |
| (gnu_ifunc_resolver_stop, gnu_ifunc_resolver_return_stop): New. |
| |
| 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| STT_GNU_IFUNC reader implementation. |
| * elfread.c: Include gdbtypes.h, value.h and infcall.h. |
| (SYMBOL_GOT_PLT_SUFFIX, elf_rel_plt_read) |
| (elf_objfile_gnu_ifunc_cache_data, struct elf_gnu_ifunc_cache) |
| (elf_gnu_ifunc_cache_hash, elf_gnu_ifunc_cache_eq) |
| (elf_gnu_ifunc_record_cache, elf_gnu_ifunc_resolve_by_cache) |
| (elf_gnu_ifunc_resolve_by_got, elf_gnu_ifunc_resolve_name) |
| (elf_gnu_ifunc_resolve_addr): New. |
| (elf_symfile_read): Call elf_rel_plt_read. |
| (elf_gnu_ifunc_fns): New. |
| (_initialize_elfread): Initialize elf_objfile_gnu_ifunc_cache_data. |
| Install elf_gnu_ifunc_fns. |
| * infcall.c (find_function_return_type): New function. |
| (find_function_addr): Resolve TYPE_GNU_IFUNC functions, if possible. |
| * minsyms.c (stub_gnu_ifunc_resolve_addr) |
| (stub_gnu_ifunc_resolve_name): New functions. |
| (stub_gnu_ifunc_fns, gnu_ifunc_fns_p): New variables. |
| * symtab.h (struct gnu_ifunc_fns, gnu_ifunc_resolve_addr) |
| (gnu_ifunc_resolve_name, gnu_ifunc_fns_p): New. |
| |
| 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Code cleanup for later STT_GNU_IFUNC support. |
| * infcall.c (find_function_addr): Remove variable code, use explicit |
| dereferences for it. Move VALUE_TYPE initialization later. |
| |
| 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| GDB find_pc_partial_function support for STT_GNU_IFUNC. |
| * blockframe.c (cache_pc_function_is_gnu_ifunc): New variable. |
| (clear_pc_function_cache): Clear it. |
| (find_pc_partial_function): Rename to ... |
| (find_pc_partial_function_gnu_ifunc): ... this function. New |
| parameter is_gnu_ifunc_p, describe it. Set *IS_GNU_IFUNC_P. |
| (find_pc_partial_function): New wrapper for this function. |
| * symtab.h (find_pc_partial_function_gnu_ifunc): New declaration. |
| |
| 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| GDB internal type support for STT_GNU_IFUNC. |
| * elfread.c (record_minimal_symbol): Support mst_text_gnu_ifunc. |
| (elf_symtab_read): Set mst_text_gnu_ifunc for |
| BSF_GNU_INDIRECT_FUNCTION. |
| * eval.c (evaluate_subexp_standard): Support TYPE_GNU_IFUNC. |
| * gdbtypes.c (init_type): Support TYPE_FLAG_GNU_IFUNC, |
| builtin_func_func, nodebug_text_gnu_ifunc_symbol and |
| nodebug_got_plt_symbol. |
| * gdbtypes.h (enum type_flag_value): New entry TYPE_FLAG_GNU_IFUNC. |
| (TYPE_GNU_IFUNC): New. |
| (struct main_type): New field flag_gnu_ifunc. |
| (struct builtin_type): New field builtin_func_func. |
| (struct objfile_type): New fields nodebug_text_gnu_ifunc_symbol and |
| nodebug_got_plt_symbol. |
| * minsyms.c (lookup_minimal_symbol_text): Support mst_text_gnu_ifunc. |
| (in_gnu_ifunc_stub): New. |
| (prim_record_minimal_symbol, find_solib_trampoline_target): Support |
| mst_text_gnu_ifunc. |
| * parse.c (write_exp_msymbol): New variable ifunc_msym. Detect and |
| support mst_text_gnu_ifunc. Support mst_slot_got_plt. |
| * solib-svr4.c (svr4_in_dynsym_resolve_code): Return true also for |
| in_gnu_ifunc_stub. |
| * symmisc.c (dump_msymbols): Support mst_text_gnu_ifunc. |
| * symtab.c (search_symbols): Likewise. |
| * symtab.h (enum minimal_symbol_type): New fields mst_text_gnu_ifunc |
| and mst_slot_got_plt. |
| (in_gnu_ifunc_stub): New declaration. |
| |
| 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Support a ring of related breakpoints. |
| * breakpoint.c (watchpoint_del_at_next_stop): New, move here code from |
| other functions, add gdb_assert. |
| (update_watchpoint, watchpoint_check): Add gdb_assert. Use |
| watchpoint_del_at_next_stop. |
| (bpstat_check_watchpoint): Use watchpoint_del_at_next_stop. |
| (bpstat_stop_status): Handle ring in related_breakpoint. |
| (set_raw_breakpoint_without_location): Initialize ring in |
| related_breakpoint. |
| (delete_breakpoint): Handle ring in related_breakpoint, use |
| watchpoint_del_at_next_stop. |
| (map_breakpoint_numbers): Handle ring in related_breakpoint. |
| |
| 2011-03-28 Tom Tromey <tromey@redhat.com> |
| |
| PR symtab/12441: |
| * dwarf2read.c (prepare_one_comp_unit): Don't call set_cu_language |
| with `language_minimal'. |
| |
| 2011-03-25 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_SYM_BRANCH_TYPE |
| instead of checking for STT_ARM_TFUNC symbol type. |
| |
| 2011-03-25 Tom Tromey <tromey@redhat.com> |
| |
| * linespec.c (symbol_found): Restore line-based result for |
| non-LOC_LABEL symbols. |
| |
| 2011-03-25 Kai Tietz <ktietz@redhat.com> |
| |
| * tui/tui-source.c (tui_set_source_content): Use filename_cmp |
| instead of strcmp for comparison. |
| (tui_source_is_displayed): Likewise. |
| * tui/tui-winsource.c (tui_update_breakpoint_info): Likewise. |
| |
| 2011-03-24 Mark Wielaard <mjw@redhat.com> |
| |
| * dwarf2read.c (lookup_signatured_type): Use DW_FORM_ref_sig8 in |
| complaint. |
| (skip_one_die): Use DW_FORM_ref_sig8, not DW_FORM_sig8. |
| (find_partial_die_in_comp_unit): Likewise in comment. |
| (read_attribute_value): Likewise. |
| (lookup_die_type): Likewise. |
| (dwarf_form_name): Likewise. |
| (dump_die_shallow): Likewise. |
| (follow_die_ref_or_sig): Likewise. |
| |
| 2011-03-24 Tom Tromey <tromey@redhat.com> |
| |
| PR breakpoints/11816: |
| * linespec.c (decode_line_1): Parse `function:label' linespecs. |
| (decode_compound): Update. |
| (find_function_symbol): New function. |
| (decode_dollar): Update. |
| (decode_label): Add 'function_symbol' parameter. Handle |
| function-relative labels. |
| (decode_variable): Update. |
| (symbol_found): Add 'function_symbol' parameter. Use label's PC, |
| not its line. Set `special_display' and canonical name for |
| labels. |
| |
| 2011-03-24 Tom Tromey <tromey@redhat.com> |
| |
| * linespec.h (struct linespec_result) <special_display>: New |
| field. |
| * breakpoint.h (struct breakpoint) <display_canonical>: New |
| field. |
| * breakpoint.c (print_breakpoint_location): Respect |
| display_canonical. |
| (create_breakpoint_sal): Add 'display_canonical' parameter. |
| (create_breakpoints_sal): Update. |
| (create_breakpoint): Update. |
| |
| 2011-03-24 Tom Tromey <tromey@redhat.com> |
| |
| * symtab.c (decode_line_spec): Update. |
| * linespec.c (build_canonical_line_spec): Change type of |
| 'canonical'. |
| (decode_line_2, decode_line_1, decode_objc, decode_compound) |
| (find_method, decode_all_digits, decode_dollar, decode_label) |
| (symbol_found): Likewise. |
| (init_linespec_result): New function. |
| * breakpoint.c (struct captured_parse_breakpoint_args) |
| <canonical_p>: New field, replaces addr_string_p. |
| (create_breakpoints_sal): Add 'canonical' parameter, replacing |
| 'addr_string'. |
| (parse_breakpoint_sals): Likewise. |
| (do_captured_parse_breakpoint): Update. |
| (create_breakpoint): Use struct linespec_result. |
| (until_break_command): Update. |
| (breakpoint_re_set_one): Update. |
| (decode_line_spec_1): Update. |
| * linespec.h (struct linespec_result): New. |
| (init_linespec_result): Declare. |
| |
| 2011-03-23 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (regcache_raw_read): If the target didn't supply a |
| given raw register, mark it as unavailable. |
| |
| 2011-03-23 Kai Tietz <ktietz@redhat.com> |
| |
| * breakpoint.c (clear_command): Use filename_cmp |
| instead of strcmp for comparison. |
| * buildsym.c (watch_main_source_file_lossage): Likewise. |
| (patch_subfile_names): Use IS_DIR_SEPARATOR instead of |
| checking just for slash. |
| * dbxread.c (read_dbx_symtab): Use lbasename instead of |
| strrchr and filename_cmp instead of strcmp for filenames. |
| (add_old_header_file): Use filename_cmp |
| instead of strcmp for comparison. |
| * exec.c (exec_set_section_address): Likewise. |
| * macrotab.c (macro_lookup_inclusion): Likewise. |
| (macro_lookup_inclusion): Likewise. |
| * elfread.c (_initialize_elfread): Likewise. |
| (elfstab_offset_sections): Likewise. |
| (elfstab_offset_sections): Use lbasename instead of |
| strrchr. |
| * mdebugread.c (parse_partial_symbols): Likewise. |
| (arse_partial_symbols): Use filename_(n)cmp instead of |
| str(n)cmp for comparison. |
| * minsyms.c (lookup_minimal_symbol): Likewise. |
| * psymtab.c (read_psymtabs_with_filename): Likewise. |
| * solib.c (solib_read_symbols): Likewise. |
| (reload_shared_libraries_1): Likewise. |
| * symmisc.c (maintenance_print_symbols): Likewise. |
| * symfile.c (separate_debug_file_exists): Likewise. |
| (reread_symbols): Likewise. |
| (find_separate_debug_file_by_debuglink): Likewise. |
| * remote-fileio.c (remote_fileio_func_rename): Likewise. |
| * source.c (add_path): Likewise. |
| * symtab.c (filename_seen): Likewise. |
| (file_matches): Likewise. |
| (print_symbol_info): Likewise. |
| (maybe_add_partial_symtab_filename): Likewise. |
| (make_source_files_completion_list): Likewise. |
| * xml-syscall.c (init_sysinfo): Likewise. |
| * windows-nat.c (_initialize_check_for_gdb_ini): Use |
| IS_DIR_SEPARATOR for checking for trailing path separator. |
| |
| 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2expr.c (execute_stack_op): Handle DW_OP_GNU_entry_value. New |
| label abort_expression. |
| * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle |
| DWARF_VALUE_OPTIMIZED_OUT. |
| |
| 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Code cleanup. |
| * c-typeprint.c (c_type_print_args): Change parameter show_artificial |
| to linkage_name. Invert its value. Update the function comment. |
| (c_type_print_varspec_suffix): Invert it at the caller. |
| * dwarf2read.c (dwarf2_compute_name): Invert it at the caller. |
| |
| 2011-03-22 Pedro Alves <pedro@codesourcery.com> |
| |
| * infcmd.c (post_create_inferior): Ignore NOT_AVAILABLE_ERROR |
| errors when reading the `stop_pc'. |
| * printcmd.c (pc_prefix): Use get_frame_pc_if_available instead of |
| get_frame_pc. |
| |
| 2011-03-22 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * NEWS: Document gdb.Write stream keyword. |
| |
| 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Revert: |
| 2011-03-21 Jan Kratochvil <jan.kratochvil@redhat.com> |
| * dwarf2read.c (producer_is_gxx_lt_4_6): New function. |
| (dwarf2_add_field): Fix new_field->accessibility for |
| cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6. |
| |
| 2011-03-22 Phil Muldoon <pmuldoon@redhat.com> |
| |
| PR python/12183 |
| |
| * python/py-function.c (fnpy_call): Treat GdbErrors differently to |
| other error classes. Do not print stack trace. |
| |
| 2011-03-21 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (producer_is_gxx_lt_4_6): New function. |
| (dwarf2_add_field): Fix new_field->accessibility for |
| cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6. |
| |
| 2011-03-21 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c (arm_analyze_prologue): Do not abort parsing when |
| encountering a load via a non-SP register. |
| |
| 2011-03-21 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * tramp-frame.c (tramp_frame_prepend_unwinder): Set stop_reason |
| field in returned unwinder. |
| |
| 2012-03-21 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * ada-lang.c (replace_operator_with_call): Copy also GDBARCH. |
| |
| 2012-03-21 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (replace_operator_with_call): Use xzalloc instead |
| of xmalloc. |
| |
| 2012-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * frame.c (frame_unwind_register): Throw an error if unwinding the |
| register failed. |
| * get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's |
| an unwind stop reason. |
| (frame_stop_reason_string): Handle UNWIND_UNAVAILABLE. |
| * frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST, |
| UNWIND_UNAVAILABLE>: New. |
| * inline-frame.c (inline_frame_unwind): Install |
| default_frame_unwind_stop_reason. |
| * frame-unwind.c: Include "exceptions.h". |
| (frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors. |
| (default_frame_unwind_stop_reason): New. |
| * frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef. |
| (default_frame_unwind_stop_reason): Declare. |
| (struct frame_unwind) <stop_reason>: New function pointer. |
| |
| * dummy-frame.c: Install default_frame_unwind_stop_reason. |
| * dwarf2-frame.c: Include exceptions.h. |
| (struct dwarf2_frame_cache) <unavailable_retaddr>: New field. |
| (dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when |
| computing the CFA. If such an error was thrown, set |
| unavailable_retaddr. |
| (dwarf2_frame_unwind_stop_reason): New. |
| (dwarf2_frame_this_id): Don't build a frame id if the CFA was |
| unavailable. |
| (dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason. |
| (dwarf2_signal_frame_unwind): Ditto. |
| |
| * amd64-tdep.c: Include "exceptions.h". |
| (struct amd64_frame_cache): New field "base_p". |
| (amd64_init_frame_cache): Clear it. |
| (amd64_frame_cache_1): New, factored out from amd64_frame_cache. |
| Avoid reading registers with functions that throw if the register |
| is not necessary to compute the frame base. |
| (amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and |
| swallowing NOT_AVAILABLE_ERROR. |
| (amd64_frame_unwind_stop_reason): New. |
| (amd64_frame_this_id): Don't build a frame id if the frame base |
| was unavailable. |
| (amd64_frame_unwind): Install amd64_frame_unwind_stop_reason. |
| (amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set |
| base_p if the frame base was computable. |
| (amd64_sigtramp_frame_unwind_stop_reason): New. |
| (amd64_sigtramp_frame_this_id): Don't build a frame id if the |
| frame base was unavailable. |
| (amd64_sigtramp_frame_unwind): Install |
| amd64_sigtramp_frame_unwind_stop_reason. |
| (amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set |
| base_p if the frame base was computable. |
| (amd64_epilogue_frame_unwind_stop_reason): New. |
| (amd64_epilogue_frame_this_id): Don't build a frame id if the |
| frame base was unavailable. |
| (amd64_epilogue_frame_unwind): Install |
| amd64_epilogue_frame_unwind_stop_reason. |
| * i386-tdep.c: Include "exceptions.h". |
| (struct i386_frame_cache): New field "base_p". |
| (i386_init_frame_cache): Clear it. |
| (i386_frame_cache_1): New, factored out from amd64_frame_cache. |
| Avoid reading registers with functions that throw if the register |
| is not necessary to compute the frame base. |
| (i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and |
| swallowing NOT_AVAILABLE_ERROR. |
| (i386_frame_unwind_stop_reason): New. |
| (i386_frame_this_id): Don't build a frame id if the frame base was |
| unavailable. |
| (i386_frame_prev_register): Handle unavailable SP. |
| (i386_frame_unwind): Install i386_frame_unwind_stop_reason. |
| (i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set |
| base_p if the frame base was computable. |
| (i386_epilogue_frame_unwind_stop_reason): New. |
| (i386_epilogue_frame_this_id): Don't build a frame id if the frame |
| base was unavailable. |
| (i386_epilogue_frame_unwind): Install |
| i386_epilogue_frame_unwind_stop_reason. |
| (i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set |
| base_p if the frame base was computable. |
| (i386_sigtramp_frame_unwind_stop_reason): New. |
| (i386_sigtramp_frame_this_id): Don't build a frame id if the frame |
| base was unavailable. |
| (i386_sigtramp_frame_unwind): Install |
| i386_sigtramp_frame_unwind_stop_reason. |
| * sentinel-frame.c (sentinel_frame_prev_register): Use the value |
| type's size, not the register's. |
| (sentinel_frame_unwind): Install default_frame_unwind_stop_reason. |
| |
| * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install |
| default_frame_unwind_stop_reason. |
| * alpha-tdep.c (alpha_sigtramp_frame_unwind) |
| (alpha_heuristic_frame_unwind): Ditto. |
| * amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto. |
| * arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto. |
| * avr-tdep.c (avr_frame_unwind): Ditto. |
| * cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind): |
| Ditto. |
| * frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto. |
| * frv-tdep.c (frv_frame_unwind): Ditto. |
| * h8300-tdep.c (h8300_frame_unwind): Ditto. |
| * hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto. |
| * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto. |
| * hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind) |
| (hppa_stub_frame_unwind): Ditto. |
| * i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto. |
| * ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind) |
| (ia64_libunwind_frame_unwind) |
| (ia64_libunwind_sigtramp_frame_unwind): Ditto. |
| * iq2000-tdep.c (iq2000_frame_unwind): Ditto. |
| * lm32-tdep.c (lm32_frame_unwind): Ditto. |
| * m32c-tdep.c (m32c_unwind): Ditto. |
| * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto. |
| * m32r-tdep.c (m32r_frame_unwind): Ditto. |
| * m68hc11-tdep.c (m68hc11_frame_unwind): Ditto. |
| * m68k-tdep.c (m68k_frame_unwind): Ditto. |
| * m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto. |
| * m88k-tdep.c (m88k_frame_unwind): Ditto. |
| * mep-tdep.c (mep_frame_unwind): Ditto. |
| * microblaze-tdep.c (microblaze_frame_unwind): Ditto. |
| * mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind) |
| (mips_stub_frame_unwind): Ditto. |
| * mn10300-tdep.c (mn10300_frame_unwind): Ditto. |
| * moxie-tdep.c (moxie_frame_unwind): Ditto. |
| * mt-tdep.c (mt_frame_unwind): Ditto. |
| * ppc-linux-tdep.c (ppu2spu_unwind): Ditto. |
| * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto. |
| * rs6000-tdep.c (rs6000_frame_unwind): Ditto. |
| * s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind) |
| (s390_sigtramp_frame_unwind): Ditto. |
| * score-tdep.c (score_prologue_unwind): Ditto. |
| * sh-tdep.c (sh_frame_unwind): Ditto. |
| * sh64-tdep.c (sh64_frame_unwind): Ditto. |
| * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto. |
| * sparc-tdep.c (sparc32_frame_unwind): Ditto. |
| * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto. |
| * sparc64-tdep.c (sparc64_frame_unwind): Ditto. |
| * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto. |
| * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto. |
| * sparc64obsd-tdep.c (sparc64obsd_frame_unwind) |
| (sparc64obsd_trapframe_unwind): Ditto. |
| * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto. |
| * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto. |
| * spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto. |
| * v850-tdep.c (v850_frame_unwind): Ditto. |
| * vax-tdep.c (vax_frame_unwind): Ditto. |
| * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto. |
| * xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto. |
| * xtensa-tdep.c (xtensa_unwind): Ditto. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Assume |
| there's always a frame. Use get_frame_pc_if_available instead of |
| get_frame_pc, and if there's no PC available, don't look up a |
| symtab. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * stack.c (print_frame_local_vars, print_frame_arg_vars): Handle |
| unavailable PC. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (set_traceframe_context): Handle unavailable PC |
| gracefully. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * frame.h (frame_unwind_caller_pc_if_available): Declare. |
| * frame.c (frame_unwind_caller_pc_if_available): New. |
| * stack.c (frame_info): Handle unavailable PC. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * frame.c (frame_unwind_pc): Rename to ... |
| (frame_unwind_pc_if_available): ... this. New `pc' output |
| parameter. Change return type to int. Gracefully handle |
| gdbarch_unwind_pc throwing NOT_AVAILABLE_ERROR. Return 0 if that |
| happened, or 1 otherwise. |
| (frame_unwind_pc): Reimplement on top of |
| frame_unwind_pc_if_available. |
| (get_frame_func): Rename to ... |
| (get_frame_func_if_available): New `pc' output parameter. Change |
| return type to int. Gracefully handle the PC not being available. |
| (get_frame_func): Reimplement on top of |
| get_frame_func_if_available. |
| (select_frame): Handle the PC being unavailable. |
| (get_prev_frame): Handle the PC being unavailable. |
| (get_frame_pc_if_available): New. |
| (get_frame_address_in_block_if_available): New. |
| (find_frame_sal): Handle the frame PC not being available. |
| * frame.h (get_frame_pc_if_available): Declare. |
| (get_frame_address_in_block_if_available): Declare. |
| (get_frame_func_if_available): Declare. |
| * stack.c (print_frame_info): Handle the PC being unavailable. |
| (find_frame_funname): Ditto. |
| (print_frame): Handle the PC being unavailable. |
| (get_frame_language): Ditto. |
| * blockframe.c (get_frame_block): Ditto. |
| * macroscope.c (default_macro_scope): Ditto. |
| * tui/tui-stack.c (tui_show_frame_info): Ditto. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * dwarf2loc.c (dwarf2_evaluate_loc_desc): Catch |
| NOT_AVAILABLE_ERROR when evaluating the location expression. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes |
| returning that the register piece is unavailable/optimized out. |
| (write_pieced_value): Handle get_frame_register_bytes returning |
| that the register piece is unavailable/optimized out when doing a |
| read-modify write of a bitfield. |
| * findvar.c (value_from_register): Handle get_frame_register_bytes |
| returning that the register piece is unavailable/optimized out. |
| * frame.c (get_frame_register_bytes): New parameters `optimizedp' |
| and `unavailablep'. Throw error on bad debug info. Use |
| frame_register instead of frame_register_read, to fill in the new |
| arguments. |
| * frame.h (get_frame_register_bytes): New parameters `optimizedp' |
| and `unavailablep'. |
| * valops.c: (value_assign): Adjust, and handle |
| get_frame_register_bytes failing. |
| * spu-tdep.c: Include exceptions.h. |
| (spu_software_single_step): Adjust, and handle |
| get_frame_register_bytes failing. |
| (spu_get_longjmp_target): Ditto. |
| * gdbarch.sh (register_to_value): Change to return int. New |
| parameters `optimizedp' and `unavailablep'. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * i386-tdep.c (i386_register_to_value): Adjust to new |
| gdbarch_register_to_value interface. |
| * i387-tdep.c (i387_register_to_value): Ditto. |
| * i387-tdep.h (i387_register_to_value): Ditto. |
| * alpha-tdep.c (alpha_register_to_value): Ditto. |
| * ia64-tdep.c (ia64_register_to_value): Ditto. |
| * m68k-tdep.c (m68k_register_to_value): Ditto. |
| * mips-tdep.c (mips_register_to_value): Ditto. |
| * rs6000-tdep.c (rs6000_register_to_value): Ditto. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * findvar.c (value_of_register): Mark the value as unavailable, if |
| the register is unavailable. |
| * frame.h (frame_register_unwind): New `unavailablep' parameter. |
| (frame_register): New `unavailablep' parameter. |
| (frame_register_read): Update comment. |
| * frame.c (frame_register_unwind): New `unavailablep' parameter. |
| Set it if the register is unavailable. If the register is |
| unavailable, clear the output buffer. |
| (frame_register): New `unavailablep' parameter. Pass it down. |
| (frame_unwind_register): Adjust. |
| (put_frame_register): Adjust. |
| (frame_register_read): Adjust. Also return false if the register |
| is not available. |
| (frame_register_unwind_location): Adjust. |
| * sentinel-frame.c (sentinel_frame_prev_register): If the register |
| is unavailable, mark the value accordingly. |
| * stack.c (frame_info): Handle unavailable registers. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * mi/mi-main.c (register_changed_p): Handle REG_UNAVAILABLE, and |
| simplify, using regcache_cooked_read. |
| |
| 2011-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.h (regcache_raw_read, regcache_raw_read_signed) |
| (regcache_raw_read_unsigned, regcache_raw_read_signed) |
| (regcache_raw_read_unsigned, regcache_raw_read_part) |
| (regcache_cooked_read, regcache_cooked_read_signed) |
| (regcache_cooked_read_unsigned, regcache_cooked_read_part) |
| (regcache_cooked_read_ftype): Change return to enum |
| register_status. |
| * regcache.c: Include exceptions.h |
| (regcache_save): Adjust to handle REG_UNAVAILABLE registers. |
| (do_cooked_read): Change return to enum register_status. Always |
| forward to regcache_cooked_read. |
| (regcache_raw_read): Change return to enum register_status. If |
| the register is not REG_VALID, memset the buffer. Return the |
| register's status. |
| (regcache_raw_read_signed): Handle non-REG_VALID registers and |
| return the register's status. |
| (regcache_raw_read_unsigned): Ditto. |
| (regcache_cooked_read): Change return to enum register_status. |
| Assert that with read-only regcaches, the register's status must |
| be known. If the regcache is read-only, and the register is not |
| REG_VALID, memset the buffer. Return the register's status. |
| (regcache_cooked_read_signed): Change return to enum |
| register_status. Handle non-REG_VALID registers and return the |
| register's status. |
| (regcache_cooked_read_unsigned): Change return to enum |
| register_status. Handle non-REG_VALID registers and return the |
| register's status. |
| (regcache_xfer_part, regcache_raw_read_part) |
| (regcache_cooked_read_part): Change return to enum |
| register_status. Return the register's status. |
| (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is |
| unavailable. |
| (regcache_dump): Handle unavailable cooked registers. |
| * frame.c (do_frame_register_read): Adjust interface to match |
| regcache_cooked_read_ftype. |
| * gdbarch.sh (pseudo_register_read): Change return to enum |
| register_status. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| |
| * i386-tdep.h (i386_pseudo_register_read): Change return to enum |
| register_status. |
| * i386-tdep.c (i386_pseudo_register_read): Change return to enum |
| register_status. If reading a raw register indicates the raw |
| register is not valid, return the raw register's status, |
| otherwise, return REG_VALID. |
| * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum |
| register_status. Handle non-REG_VALID raw registers and return |
| the register's status. |
| * arm-tdep.c (arm_neon_quad_read) |
| (arm_pseudo_read): Change return to enum register_status. Handle |
| non-REG_VALID raw registers and return the register's status. |
| * avr-tdep.c (avr_pseudo_register_read): Ditto. |
| * frv-tdep.c (frv_pseudo_register_read): Ditto. |
| * h8300-tdep.c (h8300_pseudo_register_read): Ditto. |
| * hppa-tdep.c (hppa_pseudo_register_read): Ditto. |
| * m32c-tdep.c (m32c_move_reg_t): Change return to enum |
| register_status. |
| (m32c_raw_read, m32c_raw_write, m32c_banked_read) |
| (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read) |
| (m32c_part_write, m32c_cat_read, m32c_cat_write) |
| (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write) |
| (m32c_pseudo_register_read): Change return to enum |
| register_status. Adjust. |
| * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to |
| enum register_status. Return the register's status. |
| * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum |
| register_status. Return the register's status. |
| (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto. |
| * mips-tdep.c (mips_pseudo_register_read): Ditto. |
| * mt-tdep.c (mt_pseudo_register_read): Ditto. |
| * rs6000-tdep.c (move_ev_register_func): New typedef. |
| (e500_move_ev_register): Use it. Change return to enum |
| register_status. Return the register's status. |
| (do_regcache_raw_read): New function. |
| (do_regcache_raw_write): New function. |
| (e500_pseudo_register_read): Change return to enum |
| register_status. Return the register's status. Use |
| do_regcache_raw_read. |
| (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write. |
| (dfp_pseudo_register_read): Change return to enum register_status. |
| Return the register's status. |
| (vsx_pseudo_register_read): Ditto. |
| (efpr_pseudo_register_read): Ditto. |
| (rs6000_pseudo_register_read): Ditto. |
| * s390-tdep.c (s390_pseudo_register_read): Change return to enum |
| register_status. Return the register's status. |
| * sh64-tdep.c (pseudo_register_read_portions): New function. |
| (sh64_pseudo_register_read): Change return to enum |
| register_status. Use pseudo_register_read_portions. Return the |
| register's status. |
| * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum |
| register_status. Return the register's status. |
| * sh-tdep.c (pseudo_register_read_portions): New function. |
| (sh_pseudo_register_read): Change return to enum register_status. |
| Use pseudo_register_read_portions. Return the register's status. |
| * sparc-tdep.c (sparc32_pseudo_register_read): Change return to |
| enum register_status. Return the register's status. |
| * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto. |
| * spu-tdep.c (spu_pseudo_register_read_spu) |
| (spu_pseudo_register_read): Ditto. |
| * xtensa-tdep.c (xtensa_register_read_masked) |
| (xtensa_pseudo_register_read): Ditto. |
| * bfin-tdep.c (bfin_pseudo_register_read): Ditto. |
| |
| 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * python/py-value.c (valpy_getitem): Fix formatting of error function |
| call. |
| |
| 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| ARI fixes: Add missing internationalization markups throughout |
| C source files. |
| * darwin-nat-info.c: Ditto. |
| * record.c: Ditto. |
| * remote.c: Ditto. |
| * mi/mi-main.c: Ditto. |
| |
| 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| ARI fixes: Add missing internationalization markups throughout |
| yacc files. |
| * c-exp.y: Ditto. |
| * cp-name-parser.y: Ditto. |
| * f-exp.y: Ditto. |
| * m2-exp.y: Ditto. |
| * objc-exp.y: Ditto. |
| * p-exp.y: Ditto. |
| |
| 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| ARI fixes: Messages should have no trailing new lines. |
| * darwin-nat.c (mach_check_error): Remove trailing new line from |
| warning function call message. |
| * record.c (bfdcore_read): Idem for error call. |
| |
| 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * common/signals.c (target_signal_from_host): Add _ markup to error |
| function call message. |
| (target_signal_to_host): Add _ markup and remove trailing new line |
| from warning call message. |
| (target_signal_from_command): Add _ markup to error function call |
| message. |
| |
| 2011-03-18 Phil Muldoon <pmuldoon@redhat.com> |
| |
| PR python/12149 |
| |
| * python/python.c (gdbpy_write): Accept a stream argument and |
| operate to the appropriate stream. |
| (gdbpy_flush): Likewise. |
| (_initialize_python): Add stream constants. |
| (finish_python_initialization): Add GdbOutputErrorFile class. |
| |
| 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com> |
| |
| * MAINTAINERS: Add myself as a write-after-approval maintainer. |
| |
| 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com> |
| |
| * amd64-tdep.c (amd64_relocate_instruction): Fix ordering of arguments |
| to store_signed_integer. Add debug message when relocating CALL |
| instructions. Fix formatting of debug message. |
| * i386-tdep.c (i386_relocate_instruction): Ditto. |
| |
| 2011-03-17 Joel Brobecker <brobecker@gnat.com> |
| |
| * target.h (struct target_ops): Remove to_lookup_symbol field. |
| (target_lookup_symbol): Delete macro. |
| * target.c (nosymbol, debug_to_lookup_symbol): Delete. |
| (update_current_target, setup_target_debug): Remove handling |
| of to_lookup_symbol target_ops field. |
| * ada-tasks.c (get_known_tasks_addr): Remove use of |
| target_lookup_symbol. |
| * coffread.c (coff_symtab_read): Likewise. |
| * dbxread.c (read_dbx_symtab): Ditto. |
| |
| 2011-03-17 Joel Brobecker <brobecker@gnat.com> |
| |
| PR gdb/12116: |
| * configure.ac: Add getthrds declaration check. |
| * configure, config.in: Regenerate. |
| * aix-thread.c (getthrds): Declare only if not already declared |
| in procinfo.h. More declaration out of get_signaled_thread to |
| global scope. |
| |
| 2011-03-17 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * python/py-symtab.c: Populate symtab_object_methods, |
| sal_object_methods. |
| (stpy_is_valid): New function. |
| (salpy_is_valid): Ditto. |
| * python/py-symbol.c: Declare symbol_object_methods. Populate. |
| (sympy_is_valid): New function. |
| * python/py-objfile.c: Declare objfile_object_methods. Populate. |
| (objfpy_is_valid): New function. |
| * python/py-inferior.c: Populate inferior_object_methods. |
| (infpy_is_valid): New function. |
| * python/py-infthread.c: Populate thread_object_methods. |
| (thpy_is_valid): New function. |
| * python/py-block.c: Declare block_object_methods. Populate. Declare |
| block_iterator_object_methods. Populate. |
| (blpy_is_valid): New function. |
| (blpy_iter_is_valid): Ditto. |
| |
| 2011-03-16 Keith Seitz <keiths@redhat.com> |
| |
| * linespec.c (find_methods): Canonicalize NAME before looking |
| up the symbol. |
| (name_end): New function. |
| (keep_name_info): New function. |
| (decode_line_1): Use keep_name_info. |
| (decode_compound): Likewise. |
| * cli/cli-utils.h (remove_trailing_whitespace): New function. |
| * cli/cli-utils.c (remove_trailing_whitespace): Likewise. |
| |
| PR c++/12273 |
| * linespec.c (locate_first_half): Keep overload information, too. |
| (decode_compound): Use a string to represent break characters |
| to escape the loop. |
| If P points to a break character, do not increment it. |
| For C++ and Java, keep overload information and relevant keywords. |
| If we cannot find a symbol, search the minimal symbols. |
| |
| PR c++/11734 |
| * linespec.c (decode_compound): Rename SAVED_ARG to |
| THE_REAL_SAVED_ARG. |
| Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip |
| single-quotes. |
| Pass a valid block to lookup_symbol. |
| (lookup_prefix_sym): Likewise. |
| (find_method): Construct search name based on SYM_CLASS instead |
| of SAVED_ARG. |
| * psymtab.c (lookup_partial_symbol): Add language parameter. |
| (lookup_symbol_aux_psymtabs): Likewise. |
| Don't assume that the psymtab we found was the right one. Search |
| for the desired symbol in the symtab to be certain. |
| (psymtab_search_name): New function. |
| (lookup_partial_symbol): Use psymtab_search_name. |
| Add language parameter. |
| (read_symtabs_for_function): Add language parameter and pass to |
| lookup_partial_symbol. |
| (find_symbol_file_from_partial): Likewise. |
| |
| 2011-03-16 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| PR gdb/12528 |
| * dwarf2read.c (noop_record_line): New function. |
| (dwarf_decode_lines): Ignore line tables for GCd functions. |
| |
| 2011-03-16 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Fix ARI warnings about new lines at the end of messages, which |
| are unneeded as there is a new line added at the end of the message |
| automatically. |
| * darwin-nat.c (darwin_stop_inferior): Ditto. |
| * dec-thread.c (dec_thread_get_ada_task_ptid): Ditto. |
| * dfp.c (decimal_to_number): Ditto. |
| * exec.c (print_section_info): Ditto. |
| * i386-darwin-nat.c (darwin_set_sstep): Ditto. |
| * osdata.c (get_osdata): Ditto. |
| * record.c (bfdcore_write): Ditto. |
| * remote-mips.c (mips_readchar): Ditto. |
| * remote.c (read_ptid): Ditto. |
| * ser-mingw.c (ser_windows_raw): Ditto. |
| * tracepoint.c (add_local_symbols): Ditto. |
| * windows-nat.c (fake_create_process): Ditto. |
| |
| 2011-03-16 Tom Tromey <tromey@redhat.com> |
| |
| * tracepoint.c (stop_tracing): Don't declare. |
| * event-top.c (after_char_processing_hook): Add `(void)'. |
| |
| 2011-03-16 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * NEWS: Add Parameter sub-classing description. |
| |
| 2011-03-16 Kai Tietz <ktietz@redhat.com> |
| |
| * MAINTAINERS: Update my e-mail address. |
| |
| 2011-03-15 Andreas Tobler <andreast@fgznet.ch> |
| |
| * MAINTAINERS: Add myself for write after approval privileges. |
| |
| 2011-03-15 Michael Snyder <msnyder@vmware.com> |
| |
| * frame.c (find_frame_sal): Assert sym is not null. |
| |
| * dbxread.c (process_one_symbol): Assert 'name' is not null. |
| |
| * objc-lang.c (selectors_info): Check strchr for null result. |
| |
| * stabsread.c (define_symbol): Guard against bad stabstring input. |
| |
| 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Remove trailing spaces and tabulations from pascal language |
| support sources. |
| p-exp.y: Ditto. |
| p-lang.c: Ditto. |
| p-lang.h: Ditto. |
| p-valprint.c: Ditto. |
| |
| 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher |
| than LOW. Comment it. |
| (read_partial_die): Call complaint for inappropriate zero LOWPC or |
| HIGHPC not strictly higher than LOWPC. |
| |
| 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Fix formatting of function declarations returning a pointer in |
| previous commit. |
| * varobj.c (varobj_add_child): Ditto. |
| * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto. |
| * inferior.h (get_displaced_step_closure_by_addr): Ditto. |
| |
| 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support |
| for the "generic" vector ABI used with GCC 4.3 and later. |
| (ppc64_sysv_abi_return_value): Likewise. |
| |
| 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * infcall.c (call_function_by_hand): Function return value is |
| always a non_lval, even when using struct_return. |
| |
| 2011-03-15 Pedro Alves <pedro@codesourcery.com> |
| |
| * printcmd.c (ALL_DISPLAYS_SAFE): New. |
| (map_display_numbers): New. |
| (do_delete_display): New. |
| (undisplay_command): Use map_display_numbers. |
| (do_enable_disable_display): New. |
| (enable_disable_display_command): New function. |
| (enable_display): Delete. |
| (enable_display_command): New. |
| (disable_display_command): Reimplement. |
| (_initialize_printcmd): Adjust "enable display" command to use |
| `enable_display_command' as callback. |
| |
| 2011-03-14 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * NEWS: Add Python breakpoint 'stop' operation. |
| |
| 2011-03-14 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * NEWS: Delete duplicate entry. Fix typo. |
| |
| 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Fix ARI warning about function names in first column. |
| Put prototype declaration on same line as return type. |
| * objc-exp.y: Ditto. |
| * p-exp.y: Ditto. |
| * python/py-stopevent.h: Ditto. |
| For long function names, split parameters to |
| allow function name on same line as return type. |
| * solib-pa64.c: Ditto. |
| * varobj.c: Ditto. |
| * varobj.h: Ditto. |
| For long function declaration, use single line. |
| * hppa-tdep.h: Ditto. |
| * inferior.h: Ditto. |
| |
| 2011-03-14 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * python/python.h: Declare gdbpy_should_stop and |
| gdbpy_breakpoint_has_py_cond. |
| * python/python.c: Add python.h to includes. Remove python.h from |
| HAVE_PYTHON definition |
| (gdbpy_should_stop): New dummy function. |
| (gdbpy_breakpoint_has_py_cond): New dummy function. |
| * python/py-breakpoint.c (bppy_init): Rewrite to allow |
| sub-classing capabilities. |
| (gdbpy_should_stop): New function. |
| (gdbpy_breakpoint_has_py_cond): New function. |
| (local_setattro): New function. |
| * breakpoint.c (condition_command): Add check for Python 'stop' |
| operation. |
| (bpstat_check_breakpoint_conditions): Execute Python 'stop' |
| operation function as part of stop/continue tests. |
| |
| 2011-03-14 Tom Tromey <tromey@redhat.com> |
| |
| PR gdb/12576: |
| * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'. |
| (needs_frame_dwarf_call): Likewise. |
| |
| 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Fix ARI warning about functions without parameters that do not |
| use (void). |
| * breakpoint.c (all_tracepoints): Replace () by (void). |
| * f-exp.y (match_string_literal): Ditto. |
| (yylex): Ditto. |
| * m2-exp.y (yylex): Ditto. |
| * mep-tdep.c (current_me_module): Ditto. |
| (current_options): Ditto. |
| (current_cop_data_bus_width): Ditto. |
| (current_cr_names): Ditto. |
| (current_cr_is_float): Ditto. |
| (current_ccr_names): Ditto. |
| * objc-exp.y (yylex): Ditto. |
| * p-exp.y (yylex): Ditto. |
| * remote.c (send_interrupt_sequence): Ditto. |
| * tracepoint.c (current_trace_status): Ditto. |
| * python/py-evts.c (gdbpy_initialize_py_events): Ditto. |
| * python/py-prettyprint.c (push_dummy_python_frame): Ditto. |
| |
| 2011-03-11 Michael Snyder <msnyder@vmware.com> |
| |
| * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define. |
| * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS. |
| (lookup_cmd): Test for CMD_LIST_AMBIGUOUS. |
| * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS. |
| * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS. |
| |
| * event-loop-c (delete_async_signal_handler): Assert prev_ptr. |
| (delete_async_event_handler): Ditto. |
| |
| * python/py-breakpoint.c (bppy_set_condition): Stop memory leak. |
| |
| * python/py-breakpoint.c (bppy_get_commands): Fix memory leak. |
| |
| * top.c (set_verbose): Assert showcmd was found. |
| |
| 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (warning_once): Correct style issues. |
| |
| 2011-03-11 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements. |
| |
| 2011-03-11 Andreas Schwab <schwab@redhat.com> |
| |
| * common/aclocal.m4: Remove. |
| |
| 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (windowing_enabled): Remove inline attribute. |
| (xtensa_write_register, xtensa_read_register): Likewise. |
| (xtensa_hextochar): Removed. |
| (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code. |
| |
| 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (xtensa_c0reg_t): Update comments. |
| (xtensa_call0_frame_cache_t): Update comments. New fields added. |
| (xtensa_alloc_frame_cache): Add initialization for new fields. |
| (xtensa_frame_cache): Change the way how call0_frame_cache () is called. |
| (warning_once): New function. |
| (xtensa_insn_kind): New item c0opc_and. |
| (call0_classify_opcode): Add the case for AND instruction. |
| (call0_track_op): Change arguments. New local variable litbase. |
| Add the case to handle c0opc_and. Update algorithms for c0opc_mov, |
| c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments |
| in the prologue. |
| Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu. |
| (call0_analyze_prologue): Update the comments. Change arguments. |
| Add the variety of updates to handle extended prologues, which now can |
| conduct dynamic stack adjustments. |
| (call0_frame_cache): Likewise. |
| (xtensa_skip_prologue): Update call0_analyze_prologue () function call. |
| (xtensa_gdbarch_init): Initialize xtensa_session_once_reported. |
| |
| 2011-03-10 Michael Snyder <msnyder@vmware.com> |
| |
| * tracepoint.c (cmd_qtv): Discard unused value 'packet'. |
| (cmd_qtframe): Ditto. |
| (cmd_qtbuffer): Ditto. |
| (cmd_bigqtbuffer): Ditto. |
| |
| 2011-03-10 Tom Tromey <tromey@redhat.com> |
| |
| * tracepoint.c (trace_actions_command): Update. |
| * thread.c (thread_apply_command): Update. |
| * reverse.c (delete_bookmark_command): Update. |
| (bookmarks_info): Update. |
| * printcmd.c (undisplay_command): Update. |
| * memattr.c (mem_enable_command): Update. |
| (mem_disable_command): Update. |
| (mem_delete_command): Update. |
| * inferior.c (detach_inferior_command): Update. |
| (kill_inferior_command): Update. |
| (remove_inferior_command): Update. |
| * cli/cli-utils.h (struct get_number_or_range_state): New. |
| (init_number_or_range): Declare. |
| (get_number_or_range): Update. |
| * cli/cli-utils.c (init_number_or_range): New function. |
| (get_number_or_range): Change 'pp' parameter to 'state'. Remove |
| static variables. |
| (number_is_in_list): Update. |
| * breakpoint.h (get_tracepoint_by_number): Update. |
| * breakpoint.c (map_breakpoint_numbers): Update for change to |
| get_number_or_range. |
| (find_location_by_number): Use get_number, not |
| get_number_or_range. |
| (trace_pass_set_count): New function. |
| (trace_pass_command): Update for change to get_number_or_range. |
| Rework loop logic. |
| (get_tracepoint_by_number): Remove 'multi_p' parameter; add |
| 'state' parameter. |
| |
| 2011-03-10 Phil Muldoon <pmuldoon@redhat.com> |
| |
| * python/py-param.c (add_setshow_generic): Add set/show callback |
| parameters. Register Python object context. |
| (get_show_value): New function. |
| (get_set_value): New function. |
| (call_doc_function): New function. |
| (get_doc_string): Move behind get_show_value/get_set_value. |
| |
| 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch> |
| |
| * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'. |
| |
| 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (xtensa_read_register): Add comment. |
| (xtensa_write_register): Likewise. |
| (xtensa_hextochar): Add comment and update to match coding conventions. |
| (xtensa_frame_cache, xtensa_return_value): Follow coding conventions. |
| (execute_l32e, execute_s32e, execute_code): Update comments. |
| (xtensa_exception_handler_t): Update to match coding conventions. |
| (xtensa_insn_kind): Likewise. |
| |
| 2011-03-09 Michael Snyder <msnyder@vmware.com> |
| |
| * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak. |
| |
| 2011-03-09 Pedro Alves <pedro@codesourcery.com> |
| |
| * nto-tdep.c (nto_find_and_open_solib): Constify local `base'. |
| |
| 2011-03-09 Tom Tromey <tromey@redhat.com> |
| |
| * thread.c (restore_selected_frame): Handle frame_level == -1. |
| (make_cleanup_restore_current_thread): Use |
| get_selected_frame_if_set. |
| * frame.h (get_selected_frame_if_set): Declare. |
| * frame.c (get_selected_frame_if_set): New function. |
| |
| 2011-03-09 Pedro Alves <pedro@codesourcery.com> |
| |
| * cli/cli-cmds.c (shell_escape): Use lbasename. |
| * coffread.c (coff_start_symtab): Constify parameter. |
| (complete_symtab): Constify `name' parameter. |
| (coff_symtab_read): Constify `filestring' local. |
| (coff_getfilename): Constify return and `result' local. |
| Use lbasename. |
| * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename. |
| * linux-fork.c (info_checkpoints_command): Use lbasename. |
| * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename. |
| * minsyms.c (lookup_minimal_symbol): Use lbasename. |
| * nto-tdep.c (nto_find_and_open_solib): Use lbasename. |
| * procfs.c (procfs_make_note_section): Use lbasename. |
| * tui/tui-io.c (printable_part): Constity return and parameter. |
| Use lbasename. |
| (print_filename): Constify parameters, and local `s'. |
| (tui_rl_display_match_list): Constify local `temp'. |
| |
| 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Revert: |
| 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Fix DWARF-3+ DW_AT_accessibility default assumption. |
| * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for |
| cu->header.version >= 3. |
| |
| 2011-03-09 Yao Qi <yao@codesourcery.com> |
| |
| * common/Makefile.in: Remove. |
| * common/configure: Remove. |
| * common/configure.ac: Remove. |
| |
| 2011-03-09 Yao Qi <yao@codesourcery.com> |
| |
| Revert: |
| 2011-02-11 Yao Qi <yao@codesourcery.com> |
| |
| * common/Makefile.in: Add copyright header. |
| |
| 2011-02-11 Yao Qi <yao@codesourcery.com> |
| |
| * Makefile.in: Remove signals.o from COMMON_OBS. Link |
| libcommon.a. |
| * configure.ac: Add common to sub dir. |
| * configure: Regenerate. |
| |
| 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (call0_ret): New function. |
| (xtensa_skip_prologue): Speed up analysis. |
| |
| 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers |
| while executing MI command -data-list-changed-registers. |
| |
| 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (xtensa_read_register): New function. |
| (xtensa_write_register): New function. |
| (xtensa_find_register_by_name): New function. |
| (xtensa_windowed_frame_cache): Update comments in type description. |
| (xtensa_frame_cache): Likewise. |
| (xtensa_window_interrupt_insn): New function. |
| (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames. |
| (xtensa_insn_kind): Add new instructions. |
| (rwx_special_register): New function. |
| (call0_classify_opcode): Add new instructions to the analysis. |
| (a0_saved, a7_saved, a11_saved): New variables. |
| (a0_was_saved, a7_was_saved, a11_was_saved): New variables. |
| (execute_l32e): New function. |
| (execute_s32e): New function. |
| (xtensa_exception_handler_t): New type. |
| (execute_code): New function. |
| (xtensa_window_interrupt_frame_cache): New function to conduct frame |
| analysis for Xtensa Window Exception handlers. |
| |
| 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.c (TX_PS): New. |
| (windowing_enabled): Update to count for Call0 ABI. |
| (xtensa_hextochar): New. |
| (xtensa_init_reggroups): Make algorithm generic. |
| (xtensa_frame_cache): Use TX_PS on Tiny Xtensa. |
| |
| 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update. |
| |
| 2011-03-08 Michael Snyder <msnyder@vmware.com> |
| |
| * i386-tdep.c (i386_follow_jump): Check return value of |
| target_read_memory. |
| (i386_analyze_struct_return): Ditto. |
| (i386_skip_probe): Ditto. |
| (i386_match_insn): Ditto. |
| (i386_skip_noop): Ditto. |
| (i386_analyze_frame_setup): Ditto. |
| (i386_analyze_register_saves): Ditto. |
| (i386_skip_prologue): Ditto. |
| (i386_skip_main_prologue): Ditto. |
| |
| * target.c (read_whatever_is_readable): Fix memory leak. |
| |
| * i386-tdep.c (i386_process_record): Document fall through. |
| |
| 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix DWARF-3+ DW_AT_accessibility default assumption. |
| * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for |
| cu->header.version >= 3. |
| |
| 2011-03-08 Pedro Alves <pedro@codesourcery.com> |
| |
| * remote.c (remote_check_symbols): Skip if the target has no |
| execution. |
| |
| 2011-03-08 Joel Brobecker <brobecker@adacore.com> |
| |
| * target.c (read_whatever_is_readable): Reformat comment, |
| with a minor typo fix. Minor reformatting of the code. |
| |
| 2011-03-08 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode. |
| (displaced_read_reg): Add `dsc' parameter, remove `from' parameter. |
| Use cached result instead of calling displaced_in_arm_mode again. |
| (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter. |
| (displaced_write_reg, copy_preload, copy_preload_reg): Callers update. |
| (cleanup_copro_load_store, copy_copro_load_store): Likewise. |
| (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise. |
| (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise. |
| (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise. |
| (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise. |
| (cleanup_block_load_all, cleanup_block_store_pc): Likewise. |
| (cleanup_block_load_pc, copy_block_xfer): Likewise. |
| * arm-linux-tdep.c (arm_linux_copy_svc): Callers update. |
| (arm_catch_kernel_helper_return): Likewise. |
| * gdb/arm-tdep.h : Update function declarations. |
| |
| 2011-03-07 Michael Snyder <msnyder@vmware.com> |
| |
| * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null. |
| |
| * ser-unix.c (hardwire_get_tty_state): Stop memory leak. |
| |
| * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment. |
| |
| * elfread.c (elf_symtab_read): Stop memory leak. |
| |
| * main.c (captured_main): Fix memory leak. |
| |
| 2011-03-07 Andreas Schwab <schwab@linux-m68k.org> |
| |
| * ada-lang.c (compare_names): Call is_name_suffix with string1 |
| instead of string2. |
| |
| 2011-03-07 Tom Tromey <tromey@redhat.com> |
| |
| * xcoffread.c (xcoff_sym_fns): Update. |
| * symfile.h (struct sym_fns) <sym_read_psymbols>: New field. |
| (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant. |
| * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ. |
| (symbol_file_add_with_addrs_or_offsets): Likewise. |
| (reread_symbols): Handle OBJF_PSYMTABS_READ. |
| * somread.c (som_sym_fns): Update. |
| * psymtab.h (require_partial_symbols): Declare. |
| * psymtab.c (require_partial_symbols): New function. |
| (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro. |
| (ALL_OBJFILE_PSYMTABS): Undef. |
| (ALL_PSYMTABS): Move from psympriv.h. |
| (lookup_partial_symtab, find_pc_sect_psymtab) |
| (lookup_symbol_aux_psymtabs, relocate_psymtabs) |
| (find_last_source_symtab_from_partial) |
| (forget_cached_source_info_partial) |
| (print_psymtab_stats_for_objfile, read_symtabs_for_function) |
| (expand_partial_symbol_tables, read_psymtabs_with_filename) |
| (map_symbol_names_psymtab, map_symbol_filenames_psymtab) |
| (find_symbol_file_from_partial, map_matching_symbols_psymtab) |
| (expand_symtabs_matching_via_partial, maintenance_info_psymtabs): |
| Use ALL_OBJFILE_PSYMTABS_REQUIRED. |
| * psympriv.h (ALL_PSYMTABS): Move to psymtab.c. |
| * objfiles.h (OBJF_PSYMTABS_READ): New macro. |
| * objfiles.c (objfile_has_partial_symbols): Handle lazily-read |
| psymtabs. |
| * mipsread.c (ecoff_sym_fns): Update. |
| * machoread.c (macho_sym_fns): Update. |
| * elfread.c (elf_symfile_read): Set up for lazy psymtab reading. |
| (read_psyms): New function. |
| (elf_sym_fns, elf_sym_fns_gdb_index): Update. |
| (elf_sym_fns_lazy_psyms): New global. |
| * dwarf2read.c (dwarf2_initialize_objfile): Don't call |
| dwarf2_build_psymtabs. |
| * dbxread.c (aout_sym_fns): Update. |
| * coffread.c (coff_sym_fns): Update. |
| |
| 2011-03-07 Tom Tromey <tromey@redhat.com> |
| |
| * infrun.c (print_exited_reason): Include inferior id and pid in |
| message. |
| |
| 2011-03-07 Tom Tromey <tromey@redhat.com> |
| |
| * target.h (struct target_ops) <to_has_execution>: Add ptid_t |
| parameter. |
| (target_has_execution_1): Update. |
| (target_has_execution_current): Declare. |
| (target_has_execution): Call target_has_execution_current. |
| (default_child_has_execution): Update. |
| * target.c (default_child_has_execution): Add 'the_ptid' |
| parameter. |
| (target_has_execution_1): Likewise. |
| (target_has_execution_current): New function. |
| (add_target): Update. |
| (init_dummy_target): Update. |
| * remote-m32r-sdi.c (m32r_has_execution): New function. |
| (init_m32r_ops): Use it. |
| * record.c (record_core_has_execution): Now static. Add |
| 'the_ptid' parameter. |
| * inferior.c (have_live_inferiors): Don't save current thread. |
| Use target_has_execution_1. |
| |
| 2011-03-07 Yao Qi <yao@codesourcery.com> |
| |
| * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4. |
| |
| 2011-03-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * elfread.c (elf_symtab_read): Minor reformatting. |
| |
| 2011-03-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * objc-lang.c (selectors_info): Minor reformatting. |
| |
| 2011-03-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (compare_names): Add FALLTHROUGH comment. |
| |
| 2011-03-07 Joel Brobecker <brobecker@adacore.com> |
| Michael Snyder <msnyder@vmware.com> |
| |
| * ada-valprint.c (ada_val_print_array): Move the declaration of |
| "byte_order" and "elttype" inside the block where these variables |
| are actually used. Remove some special handling for the case |
| where "elttype" and "eltlen" are null. Replace by a comment |
| and a couple of assertion checks. |
| |
| 2011-03-05 Michael Snyder <msnyder@vmware.com> |
| |
| * source.c (add_path): Replace semicolon at end of block. |
| * dwarf2expr.c (execute_stack_op): Ditto. |
| |
| 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h. |
| * configure.tgt (bfin-*-*linux*): Define gdb_sim. |
| (bfin-*-*): Likewise. |
| |
| 2011-03-05 Michael Snyder <msnyder@vmware.com> |
| |
| * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon. |
| * mdebugread.c (parse_symbol): Ditto. |
| * parse.c (parse_exp_in_context): Ditto. |
| * source.c (add_path): Ditto. |
| * utils.c (gnu_debuglink_crc32): Ditto. |
| * varobj.c (variable_language): Ditto. |
| |
| * linux-tdep.c (linux_get_siginfo_type): Stop memory leak. |
| |
| 2011-03-04 Michael Snyder <msnyder@vmware.com> |
| |
| * linux-fork.c (inferior_call_waitptid): Fix copy/paste error. |
| |
| * symfile.c (simple_overlay_update): Check for null return value |
| from lookup_minimal_symbol. |
| |
| * xml-syscall.c (syscall_start_syscall): Assert name is non null. |
| |
| 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * eval.c (parse_and_eval_address_1): Remove function. |
| * linespec.c (decode_indirect): Call parse_to_comma_and_eval |
| instead of parse_and_eval_address_1. |
| * value.h (parse_and_eval_address_1): Remove prototype. |
| |
| 2011-03-04 Michael Snyder <msnyder@vmware.com> |
| |
| * remote.c (putpkt_binary): Document that case stmt falls through. |
| |
| 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpointc (print_it_typical): Move NULL check from here... |
| (print_bp_stop_message): ... to here. |
| |
| 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com> |
| |
| * breakpoint.c (enable_command): Use break instead of continue, |
| and fill in a missing break. |
| (disable_command): Ditto. |
| |
| 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate. |
| (terminal_save_ours): Remove misleading comment. |
| (inflow_inferior_data_cleanup): Free ttystate. |
| (inflow_inferior_exit): Likewise. |
| (copy_terminal_info): Copy ttystate. |
| |
| * serial.c (serial_copy_tty_state): New function. |
| * serial.h (serial_copy_tty_state): Add prototype. |
| (struct serial_ops): Add copy_tty_state callback. |
| * ser-base.c (ser_base_copy_tty_state): New function. |
| * ser-base.h (ser_base_copy_tty_state): Add prototype. |
| * ser-go32.c (dos_copy_tty_state): New function. |
| (dos_ops): Install copy_tty_state callback. |
| * ser-mingw.c (_initialize_ser_windows): Likewise. |
| * ser-pipe.c (_initialize_ser_pipe): Likewise. |
| * ser-unix.c (hardwire_copy_tty_state): New function. |
| (_initialize_ser_hardwire): Install it. |
| |
| 2011-03-04 Michael Snyder <msnyder@vmware.com> |
| |
| * breakpoint.c (create_breakpoint): Add missing break statement. |
| |
| Reverting this patch: |
| * infcall.c (call_function_by_hand): Add break statements for lint. |
| |
| Reverting this patch: |
| * cli/cli-script.c (script_from_file): Add break for lint. |
| |
| 2011-03-04 Michael Snyder <msnyder@vmware.com> |
| |
| * solib.c (reload_shared_libraries_1): Close memory leak. |
| |
| 2011-03-03 Tom Tromey <tromey@redhat.com> |
| |
| PR gdb/12538: |
| * dwarf2read.c (process_psymtab_comp_unit): Handle case where |
| DW_STRING is NULL. |
| |
| 2011-03-03 Michael Snyder <msnyder@vmware.com> |
| |
| * remote-fileio.c (remote_fileio_func_fstat): Initialize all |
| fields of struct 'st' to zero. |
| |
| * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize |
| sal.pspace before calling set_current_source_symtab_and_line. |
| |
| 2011-03-03 Yao Qi <yao@codesourcery.com> |
| |
| * Makefile.in (configure-common): Remove. Let Makefile |
| in dir common to rebuild itself. |
| (common/Makefile): Likewise. |
| |
| 2011-03-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * utils.c (parse_escape): Add i18n markup in error message. |
| |
| 2011-03-03 Yao Qi <yao@codesourcery.com> |
| |
| * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with |
| ARM_PC_REGNUM. |
| (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise. |
| (displaced_write_reg, displaced_read_reg): Likewise. |
| (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise. |
| (cleanup_block_load_pc, copy_block_xfer): Likewise. |
| (cleanup_branch): Replace magic number 14 and 15 with |
| ARM_LR_REGNUM and ARM_PC_REGNUM respectively. |
| |
| 2011-03-02 Michael Snyder <msnyder@vmware.com> |
| |
| * maint.c (maintenance_do_deprecate): No need to check for NULL. |
| |
| * cli/cli-script.c (script_from_file): Add break for lint. |
| |
| * mdebugread.c (parse_partial_symbols): Fix indent. |
| |
| * target-descriptions.c (tdesc_gdb_type): No need to call |
| xstrdup, callee saves a copy. |
| |
| * printcmd.c (print_scalar_formatted): Use strncpy for safety. |
| |
| * infcall.c (call_function_by_hand): Add break statements for lint. |
| |
| * utils.c (parse_escape): Escape the escape char. |
| |
| * python/py-inferior.c (build_inferior_list): Error out if |
| PyList_Append fails. |
| (gdbpy_inferiors): Error out if build_inferior_list fails. |
| |
| * linux-nat.c (linux_nat_xfer_partial): Preserve errno around |
| a function call. |
| |
| * record.c (record_restore): Move printf to before error return. |
| |
| 2011-03-02 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.h (struct displaced_step_closure): Add two new fields |
| is_thumb and insn_size. |
| * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset |
| on both ARM and Thumb mode. |
| (arm_process_displaced_insn): Set is_thumb and insn_size. |
| (arm_displaced_init_closure): Handle both 16-bit and 32-bit. |
| (arm_displaced_step_fixup): Likewise. |
| |
| 2011-03-01 Michael Snyder <msnyder@vmware.com> |
| |
| * cli/cli-dump.c (dump_bfd_file): Check error return and warn. |
| |
| * jv-lang.c (evaluate_subexp_java): Conditional can't be true. |
| |
| * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here. |
| |
| * cli/cli-dump.c (restore_binary_file): Validate ftell return value. |
| |
| * ada-lang.c (ada_make_symbol_completion_list): Replace malloc |
| with xmalloc. |
| |
| * ada-lang.c (aggregate_assign_others): Rename inner scope variable |
| which shadows function parameter. |
| |
| * tracepoint.c (create_tsv_from_upload): Superfluous call |
| to xstrdup. Callee already calls xstrdup. |
| |
| * linespec.c (decode_line_1): Remove unnecessary null check. |
| |
| * tracepoint.c (scope_info): Fix mem leak, remove underused |
| variable. |
| |
| * python/py-prettyprint.c (apply_val_pretty_printer): Remove |
| superfluous null check. |
| |
| * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null. |
| (value_of_builtin_frame_fp_reg): Ditto. |
| |
| * event-top.c (display_gdb_prompt): Remove superfluous null check. |
| |
| * python/py-prettyprint.c (apply_val_pretty_printer): VAL may |
| be null. |
| |
| * linespec.c (decode_line_1): Check for null before dereference. |
| |
| * reverse.c (record_restore): Move null-check to before pointer |
| dereference. |
| |
| * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable. |
| |
| * objc-lang.c (selectors_info): Add explanitory comment. |
| (classes_info): Ditto. |
| |
| 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define. |
| (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel |
| versions of the trampoline. Handle Thumb vs. ARM addresses. |
| (arm_kernel_linux_restart_syscall_tramp_frame): New global. |
| (arm_linux_init_abi): Install it. |
| * arm-tdep.c (arm_psr_thumb_bit): Make global. |
| * arm-tdep.c (arm_psr_thumb_bit): Add prototype. |
| |
| 2011-02-28 Michael Snyder <msnyder@vmware.com> |
| |
| * ui-out.c (ui_out_field_core_addr): Make local char buffer |
| a little bigger, to avoid possibility of an overflow. |
| |
| * breakpoint.c (breakpoint_adjustment_warning): Make local char |
| buffers a little bigger, to avoid possibility of an overflow. |
| |
| * coffread.c (coff_getfilename): Add check to avoid overflow. |
| |
| * objc-lang.c (selectors_info): Add a small safety margin to |
| avoid overflow. |
| (classes_info): Error out on too long REGEXP. |
| |
| * infrun.c (handle_inferior_event): Remove unused function call. |
| |
| * fork-child.c (fork_inferior): Remove ifdef'd code and |
| unused variable. |
| |
| * linux-thread-db.c (attach_thread): Discard unused value. |
| |
| * linux-nat.c (linux_handle_extended_wait): Delete unused variable. |
| |
| * remote.c (remote_get_noisy_reply): Discard unused value. |
| (remote_vcont_resume): Ditto. |
| (remote_stop_ns): Ditto. |
| |
| * linespec.c (decode_objc): Delete unused variable. |
| |
| * tui/tui-regs.c (tui_register_format): Delete unused variable. |
| |
| * dwarf2read.c (add_partial_symbol): Discard unused values. |
| (read_base_type): Delete unused variable. |
| |
| * dbxread.c (read_dbx_symtab): Discard unused value. |
| |
| * eval.c (evaluate_subexp_standard): Delete unused variable, |
| and discard unused values. |
| |
| * infcmd.c (_initialize_infcmd): Discard unused values. |
| |
| * stabsread.c (rs6000_builtin_type): Missing break statement. |
| |
| * dbxread.c (process_one_symbol): Discard unused value. |
| |
| * coffread.c (coff_end_symtab): Delete unused variable. |
| |
| * dwarf2read.c (dw2_get_file_names): Discard unused value. |
| (dwarf2_add_typedef): Delete unused variable. |
| (read_namespace): Ditto. |
| (dwarf_decode_macros): Ditto. |
| |
| * m2-lang.c (evaluate_subexp_modula2): Discard unused variable. |
| |
| * opencl-lang.c (evaluate_subexp_opencl): Discard unused value. |
| |
| * p-valprint.c (pascal_val_print): Discard unused value. |
| |
| * utils.c (nquery): Call va_end before return; |
| (yquery): Ditto. |
| (query): Ditto. |
| |
| * proc-service.c (ps_plog): Call va_end before return. |
| |
| 2011-02-28 Tom Tromey <tromey@redhat.com> |
| |
| * python/python.c (gdbpy_value_cst): New global. |
| (_initialize_python): Initialize it. |
| * python/python-internal.h (gdbpy_value_cst): Declare. |
| * python/py-value.c (convert_value_from_python): Use |
| gdbpy_value_cst. |
| |
| 2011-02-28 Michael Snyder <msnyder@vmware.com> |
| |
| * python/py-cmd.c (cmdpy_init): Fix memory leak. |
| |
| * breakpoint.c (catch_syscall_completer): Free malloced list. |
| |
| * jv-lang.c (java_primitive_type_from_name): Add missing break. |
| |
| * opencl-lang.c (lval_func_check_validity): Rename inner variables. |
| (lval_func_check_synthetic_pointer): Ditto. |
| (lval_func_free_closure): Fix use-after-free. |
| |
| 2011-02-28 Tom Tromey <tromey@redhat.com> |
| |
| * psymtab.c (expand_partial_symbol_tables): Use |
| ALL_OBJFILE_PSYMTABS. |
| |
| 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * objc-lang.c (selectors_info): Error on too long REGEXP. |
| |
| 2011-02-28 Michael Snyder <msnyder@vmware.com> |
| |
| * python/py-param.c (set_parameter_value): Add missing |
| break statement. |
| |
| * linux-record.c (record_linux_system_call): Add missing |
| break statement. |
| |
| 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * breakpoint.c (print_one_breakpoint_location): Remove unused |
| argument PRINT_ADDRESS_BITS. Update callers. |
| (print_one_breakpoint): Likewise. |
| |
| 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * breakpoint.c (wrap_indent_at_field): New function. |
| (print_breakpoint_location): Use it instead of WRAP_INDENT argument. |
| Allocate ui_stream locally instead of using STB argument. |
| (print_one_breakpoint_location): Update call. |
| * ui-out.c (ui_out_query_field): New function. |
| * ui-out.h (ui_out_query_field): Add prototype. |
| |
| 2011-02-28 Joel Brobecker <brobecker@adacore.com> |
| |
| From Michael Snyder <msnyder@vmware.com> |
| * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment. |
| |
| 2011-02-27 Michael Snyder <msnyder@vmware.com> |
| |
| * objc-lang.c (selectors_info): Prevent string overrun. |
| |
| * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one |
| error in strncpy. |
| |
| * symtab.c (rbreak_command): Move variable 'file_name' to |
| outer scope. |
| |
| * d-valprint.c (dynamic_array_type): Avoid shadowing a function |
| param with a local variable of the same name. |
| |
| 2011-02-27 Michael Snyder <msnyder@vmware.com> |
| |
| * value.c (value_from_history_ref): New function. |
| * value.h (value_from_history_ref): Export. |
| * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref |
| to parse value history references. |
| * cli/cli-utils.h (get_number_trailer): Update comment. |
| |
| 2011-02-27 Michael Snyder <msnyder@vmware.com> |
| |
| * inferior.c (detach_inferior_command): Use get_number_or_range. |
| (kill_inferior_command): Ditto. |
| (remove_inferior_command): Ditto. |
| (initialize_inferiors): Make command names plural. |
| Update help strings. |
| |
| 2011-02-27 Michael Snyder <msnyder@vmware.com> |
| |
| * darwin-nat-info.c: Fix comment typo. |
| * dwarf2expr.h: Ditto. |
| * fbsd-nat.c: Ditto. |
| * fbsd-nat.h: Ditto. |
| * frame-unwind.h: Ditto. |
| * frame.h: Ditto. |
| * hppa-hpux-tdep.c: Ditto. |
| * i386-linux-nat.c: Ditto. |
| * linux-nat.c: Ditto. |
| * nbsd-nat.c: Ditto. |
| * nbsd-nat.h: Ditto. |
| * ppc-linux-tdep.c: Ditto. |
| * serial.c: Ditto. |
| * ui-file.h: Ditto. |
| * tui/tui-winsource.c: Ditto. |
| |
| 2011-02-26 Michael Snyder <msnyder@vmware.com> |
| |
| * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file). |
| |
| * maint.c (maintenance_do_deprecate): Plug a memory leak. |
| |
| * dwarf2loc.c (insert_bits): Avoid shadowing a function param |
| with a local variable of the same name. |
| |
| * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function |
| param with a local variable of the same name. |
| (i387_supply_xsave): Ditto. |
| |
| * linux-low.c (linux_nat_xfer_osdata): Rename local variable so |
| that it does not shadow a function parameter. |
| |
| * i386-nat.c (i386_length_and_rw_bits): Document that case |
| statement is meant to fall through. |
| |
| * expprint.c (dump_subexp_body_standard): Document that case |
| statement is meant to fall through. |
| |
| * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete |
| dead if statement. Condition can't be false. |
| |
| 2011-02-25 Michael Snyder <msnyder@vmware.com> |
| |
| * arm-tdep.c: Fix typos in comments. |
| * bsd-uthread.c: Ditto. |
| * completer.c: Ditto. |
| * corelow.c: Ditto. |
| * cp-namespace.c: Ditto. |
| * cp-support.c: Ditto. |
| * cris-tdep.c: Ditto. |
| * dbxread.c: Ditto. |
| * dwarf2read.c: Ditto. |
| * frame.h: Ditto. |
| * gdbtypes.h: Ditto. |
| * inferior.h: Ditto. |
| * mdebugread.c: Ditto. |
| * mips-tdep.c: Ditto. |
| * ppc-linux-nat.c: Ditto. |
| * ppc-linux-tdep.c: Ditto. |
| * printcmd.c: Ditto. |
| * sol-thread.c: Ditto. |
| * solib-frv.c: Ditto. |
| * solist.h: Ditto. |
| * sparc64-tdep.c: Ditto. |
| * spu-tdep.c: Ditto. |
| * stabsread.c: Ditto. |
| * symfile.c: Ditto. |
| * valops.c: Ditto. |
| * varobj.c: Ditto. |
| * vax-nat.c: Ditto. |
| * python/py-block.c: Ditto. |
| * python/py-symbol.c: Ditto. |
| * python/py-symtab.c: Ditto. |
| * python/py-value.c: Ditto. |
| * tui/tui-win.c: Ditto. |
| |
| 2011-02-25 Michael Snyder <msnyder@vmware.com> |
| |
| * inferior.c (print_inferior): Accept a string instead of an int |
| for requested_inferiors, and use get_number_or_range to parse it. |
| (info_inferiors_command): Pass args string to print_inferior. |
| (initialize_inferiors): Change help string for info inferiors. |
| * inferior.h (print_inferior): Export prototype change. |
| |
| 2011-02-25 Tom Tromey <tromey@redhat.com> |
| |
| * common/ax.def (invalid2): Set to 0x31. |
| |
| 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use |
| L and plongest. |
| (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset, |
| use L and plongest. |
| (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest. |
| |
| 2011-02-24 Michael Snyder <msnyder@vmware.com> |
| |
| * Makefile.in (clean): Make clean should remove generated files |
| observer.h and observer.inc. |
| |
| 2011-02-24 Joel Brobecker <brobecker@adacore.com> |
| |
| Revert the following patch (not approved yet): |
| 2011-02-21 Hui Zhu <teawater@gmail.com> |
| * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h. |
| * ax-gdb.c (gen_printf_expr_callback): New function. |
| * ax-gdb.h (gen_printf_expr_callback): Forward declare. |
| * ax-general.c (ax_memcpy): New function. |
| (ax_print): Handle "printf". |
| (ax_reqs): Ditto. |
| * ax.h (ax_memcpy): Forward declare. |
| * common/ax.def (invalid2): Removed. |
| (printf): New entry. |
| * printcmd.c (printcmd.h): New include. |
| (string_printf): New function. |
| (ui_printf): Removed. |
| (printf_command): Remove static. Call string_printf. |
| (eval_command): Call string_printf. |
| * printcmd.h: New file. |
| * tracepoint.c (validate_actionline, |
| encode_actions_1): handle printf_command. |
| |
| 2011-02-23 Tom Tromey <tromey@redhat.com> |
| |
| * ax-general.c (ax_pick): Add missing newline. |
| |
| 2011-02-23 Michael Snyder <msnyder@vmware.com> |
| |
| * breakpoint.c (breakpoint_1): Change first argument from an int |
| to a char pointer, so that the function now accepts a list of |
| breakpoints rather than just one. Use new function |
| 'number_is_in_list' to implement. |
| (breakpoints_info): Pass char * instead of int to breakpoint_1. |
| (watchpoints_info): Ditto. |
| (tracepoints_info): Ditto. |
| (maintenance_info_breakpoints): Ditto. |
| (_initialize_breakpoint): Update help strings to reflect the fact |
| that these functions can now take more than one argument. |
| * cli/cli-utils.c (number_is_in_list): New function. |
| * cli/cli-utils.h (number_is_in_list): Export. |
| |
| 2011-02-23 Michael Snyder <msnyder@vmware.com> |
| |
| * memattr.c (mem_enable_command): Use get_number_or_range. |
| (mem_disable_command): Ditto. |
| (mem_delete_command): Ditto. |
| (_initialize_mem): Tweak usage message to reflect multiple |
| arguments. |
| |
| 2011-02-22 Doug Evans <dje@google.com> |
| |
| Add gdb.lookup_global_symbol python function. |
| * NEWS: Add entry. |
| * python/py-symbol.c (gdbpy_lookup_global_symbol): New function. |
| * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it. |
| * python/python.c (GdbMethods): Add entry for lookup_global_symbol. |
| |
| 2011-02-22 Tom Tromey <tromey@redhat.com> |
| |
| * language.c (language_class_name_from_physname): Rename |
| 'curr_language' argument to 'lang'; use in body. |
| |
| 2011-02-22 Michael Snyder <msnyder@vmware.com> |
| |
| * cli/cli-utils.c (number_is_in_list): Check for zero return. |
| |
| 2011-02-22 Pedro Alves <pedro@codesourcery.com> |
| |
| * frame-unwind.h: Fix comment to mention the this frame, not the |
| next. |
| |
| 2011-02-22 Tom Tromey <tromey@redhat.com> |
| |
| * symfile.c (auto_solib_limit): Remove. |
| * symfile.h (auto_solib_limit): Remove. |
| |
| 2011-02-22 Joel Brobecker <brobecker@adacore.com> |
| |
| * Makefile.in (INSTALLED_LIBS): Delete. Update comment. |
| |
| 2011-02-21 Michael Snyder <msnyder@vmware.com> |
| |
| * gdbthread.h (print_thread_info): Change prototype. |
| * thread.c (print_thread_info): Accept char* instead of int for |
| requested_threads argument. Use new function number_is_in_list |
| to determine which threads to list. |
| (info_threads_command): Pass char* to print_thread_info. |
| * cli/cli-utils.c (number_is_in_list): New function. |
| * cli/cli-utils.h (number_is_in_list): Export. |
| * mi/mi-main.c (mi_cmd_thread_info): Pass char* to |
| print_thread_info. |
| (print_one_inferior): Ditto. |
| (mi_cmd_list_thread_groups): Ditto. |
| |
| 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * common/Makefile.in (CFLAGS): New. |
| (COMPILE): Add $(CFLAGS). |
| |
| 2011-02-21 Tom Tromey <tromey@redhat.com> |
| |
| * breakpoint.c (catch_syscall_command_1): Fix typo. |
| |
| 2011-02-21 Tom Tromey <tromey@redhat.com> |
| |
| * reverse.c: Include cli-utils.h. |
| * printcmd.c: Include cli-utils.h. |
| (string_printf): Use skip_spaces. |
| * cli/cli-utils.h: New file. |
| * cli/cli-utils.c: New file. |
| * cli/cli-dump.h (skip_spaces): Move to cli-utils.h. |
| * cli/cli-dump.c (skip_spaces): Move to cli-utils.c. |
| * breakpoint.h (get_number, get_number_or_range): Move to |
| cli-utils.h. |
| * breakpoint.c: Include cli-utils.h. |
| (get_number_trailer, get_number, get_number_or_range) |
| (ep_skip_leading_whitespace): Move to cli-utils.c. |
| (create_breakpoint_sal, find_condition_and_thread) |
| (decode_static_tracepoint_spec, watch_command_1) |
| (watch_maybe_just_location, ep_parse_optional_if_clause) |
| (catch_fork_command_1, catch_exec_command_1) |
| (catch_syscall_command_1): Use skip_spaces, skip_to_space. |
| * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o. |
| (SUBDIR_CLI_SRCS): Add cli-utils.c. |
| (HFILES_NO_SRCDIR): Add cli-utils.h. |
| (cli-utils.o): New target. |
| |
| 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID |
| before calling discard_all_inferiors. |
| |
| 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * opencl-lang.c (STRUCT_OCL_TYPE): Remove. |
| (struct builtin_opencl_type): Remove. |
| (builtin_opencl_type): Change return type to "struct type **". |
| (lookup_opencl_vector_type): Update caller. |
| (opencl_language_arch_info): Copy primitive type vector from gdbarch. |
| (build_opencl_types): Install plain array of "struct type *" |
| instead of "struct builtin_opencl_type". |
| |
| 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * arm-linux-nat.c: Include "observer.h" and "gdbthread.h". |
| (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define. |
| (struct arm_linux_hwbp_cap): New type. |
| (arm_linux_get_hwbp_cap): New function. |
| (arm_linux_get_hw_breakpoint_count): Likewise. |
| (arm_linux_get_hw_watchpoint_count): Likewise. |
| (arm_linux_can_use_hw_breakpoint): Likewise. |
| (arm_hwbp_type): New type. |
| (arm_hwbp_control_t): Likewise. |
| (struct arm_linux_hw_breakpoint): Likewise. |
| (struct arm_linux_thread_points): Likewise. |
| (arm_threads): New global variable. |
| (arm_linux_find_breakpoints_by_tid): New function. |
| (arm_hwbp_control_initialize): Likewise. |
| (arm_hwbp_control_is_enabled): Likewise. |
| (arm_hwbp_control_disable): Likewise. |
| (arm_linux_hw_breakpoint_initialize): Likewise. |
| (arm_linux_get_hwbp_type): Likewise. |
| (arm_linux_hw_watchpoint_initialize): Likewise. |
| (arm_linux_hw_breakpoint_equal): Likewise. |
| (arm_linux_insert_hw_breakpoint1): Likewise. |
| (arm_linux_remove_hw_breakpoint1): Likewise. |
| (arm_linux_insert_hw_breakpoint): Likewise. |
| (arm_linux_remove_hw_breakpoint): Likewise. |
| (arm_linux_region_ok_for_hw_watchpoint): Likewise. |
| (arm_linux_insert_watchpoint): Likewise. |
| (arm_linux_remove_watchpoint): Likewise. |
| (arm_linux_stopped_data_address): Likewise. |
| (arm_linux_stopped_by_watchpoint): Likewise. |
| (arm_linux_watchpoint_addr_within_range): Likewise. |
| (arm_linux_new_thread): Likewise. |
| (arm_linux_thread_exit): Likewise. |
| (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint |
| related target callbacks. Register arm_linux_new_thread and |
| arm_linux_thread_exit. |
| * arm-tdep.h (arm_pc_is_thumb): Add prototype. |
| * arm-tdep.c (arm_pc_is_thumb): Make global. |
| (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint. |
| |
| 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * breakpoint.c (update_watchpoint): Do not attempt to recreate |
| per-frame locations while within a function epilogue. |
| |
| 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * ser-mingw.c (ser_windows_close): Reformat comment to better conform |
| to GNU coding standards. |
| |
| 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| Allow use of mingw native on Windows 95 OS. |
| * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry. |
| (ser_windows_close): Only call CancelIo if function exists. |
| (_initialize_ser_windows): Use LoadLirary/GetProcAddress |
| to check for existence of CancelIo function in kernel32 DLL. |
| |
| 2011-02-21 Hui Zhu <teawater@gmail.com> |
| |
| * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h. |
| * ax-gdb.c (gen_printf_expr_callback): New function. |
| * ax-gdb.h (gen_printf_expr_callback): Forward declare. |
| * ax-general.c (ax_memcpy): New function. |
| (ax_print): Handle "printf". |
| (ax_reqs): Ditto. |
| * ax.h (ax_memcpy): Forward declare. |
| * common/ax.def (invalid2): Removed. |
| (printf): New entry. |
| * printcmd.c (printcmd.h): New include. |
| (string_printf): New function. |
| (ui_printf): Removed. |
| (printf_command): Remove static. Call string_printf. |
| (eval_command): Call string_printf. |
| * printcmd.h: New file. |
| * tracepoint.c (validate_actionline, |
| encode_actions_1): handle printf_command. |
| |
| 2011-02-19 Michael Snyder <msnyder@vmware.com> |
| |
| * reverse.c (delete_one_bookmark): Argument is now bookmark |
| id rather than pointer to bookmark struct. |
| (delete_bookmark_command): Use get_number_or_range. |
| (goto_bookmark_command): Parse with get_number instead of strtoul. |
| (bookmark_1): New function. Print info for one bookmark. |
| (bookmarks_info): Use get_number_or_range and bookmark_1. |
| |
| 2011-02-18 Michael Snyder <msnyder@vmware.com> |
| |
| * thread.c (info_threads_command): Re-implement using |
| get_number_or_range. |
| (thread_apply_command): Ditto. |
| |
| 2011-02-18 Tom Tromey <tromey@redhat.com> |
| |
| * common/ax.def: New file. |
| * ax.h (enum agent_op): Use ax.def. |
| * ax-general.c (aop_map): Use ax.def. |
| |
| 2011-02-18 Tom Tromey <tromey@redhat.com> |
| |
| * ax-general.c (aop_map): Add pick and rot. |
| * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement. |
| <DW_OP_rot>: Implement. |
| * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants. |
| (ax_pick): Declare. |
| * ax-general.c (ax_pick): New function. |
| |
| 2011-02-18 Tom Tromey <tromey@redhat.com> |
| |
| * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc. |
| |
| 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Tom Tromey <tromey@redhat.com> |
| |
| * cp-support.c (make_symbol_overload_list_namespace): Do not call |
| make_symbol_overload_list_block with NULL BLOCK. |
| * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF. |
| |
| 2011-02-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (get_number_trailer): No longer accept a NULL PP. |
| * breakpoint.h (get_number_or_range): Declare. |
| * printcmd.c (ALL_DISPLAYS): Declare. |
| (delete_display): Reimplement taking a display pointer. |
| (undisplay_command): Accept a range of displays to delete, using |
| get_number_or_range. |
| |
| 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * c-valprint.c (c_val_print): Add embedded_offset to address |
| for arrays of unspecified length. |
| * p-valprint.c (pascal_val_print): Likewise. |
| |
| 2011-02-18 Yao Qi <yao@codesourcery.com> |
| |
| * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ... |
| (arm_process_displaced_insn): .. here. Remove parameter INSN. |
| (thumb_process_displaced_insn): New. |
| * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update |
| call to arm_process_displaced_insn. |
| * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn. |
| |
| 2011-02-17 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare. |
| * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from |
| compile_dwarf_to_ax. No longer static. Call |
| dwarf2_compile_cfa_to_ax. |
| (locexpr_tracepoint_var_ref): Update. |
| (loclist_tracepoint_var_ref): Update. |
| * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare. |
| * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame' |
| argument; add 'gdbarch' and 'pc'. |
| (dwarf2_compile_cfa_to_ax): New function. |
| (dwarf2_frame_cache): Update. |
| |
| 2011-02-17 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_type_of_array): Fix the size of the array |
| in the case of an unconstrained packed array. |
| |
| 2011-02-17 Yao Qi <yao@codesourcery.com> |
| |
| * common/Makefile.in: Add more targets for make. |
| |
| 2011-02-16 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2loc.c (unimplemented): Fix typo. |
| |
| 2011-02-16 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2loc.c (unimplemented): Handle unnamed opcodes. |
| (compile_dwarf_to_ax) <default>: Use unimplemented. |
| <DW_OP_deref>: Update. |
| (disassemble_dwarf_expression): Update. |
| * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument. |
| (decode_locdesc): Update. |
| * dwarf2expr.h (dwarf_stack_op_name): Update. |
| |
| 2011-02-16 Tom Tromey <tromey@redhat.com> |
| |
| * ax.h (struct aop_map) <name>: Now const. |
| |
| 2011-02-16 Tom Tromey <tromey@redhat.com> |
| |
| * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other |
| than axs_rvalue. |
| |
| 2011-02-16 Yao Qi <yao@codesourcery.com> |
| |
| * infrun.c (get_displaced_step_closure_by_addr): New. |
| * inferior.h: Declare it. |
| * arm-tdep.c: (arm_pc_is_thumb): Call |
| get_displaced_step_closure_by_addr. Adjust MEMADDR if it |
| returns non-NULL. |
| |
| 2011-02-16 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| gdb/ |
| * tracepoint.c (memrange_sortmerge): Fix list A's end calculation. |
| |
| 2011-02-16 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * value.c (value_contents_copy_raw): Extend describing comment. |
| Assert that the destination contents we're overwriting are wholly |
| available. |
| (value_contents_copy): Extend describing comment. |
| |
| 2011-02-16 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * value.c (value_available_contents_eq): Remove redundant local |
| variables. Fix available contents comparision. |
| * value.h (value_available_contents_eq): Extend describing |
| comment. |
| |
| 2011-02-16 Yao Qi <yao@codesourcery.com> |
| |
| * thread.c (info_threads_command): Add missing i18n markup and remove |
| trailing newline. |
| |
| 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| * breakpoint.c (longjmp_names): New variable. |
| (struct breakpoint_objfile_data): New type. |
| (breakpoint_objfile_key): New variable. |
| (msym_not_found): New variable. |
| (msym_not_found_p): New predicate. |
| (get_breakpoint_objfile_data): New function. |
| (create_overlay_event_breakpoint): Check per-objfile cache for |
| symbols first. |
| (create_longjmp_master_breakpoint): Likewise. |
| (create_std_terminate_master_breakpoint): Likewise. |
| (create_exception_master_breakpoint): Likewise. |
| (_initialize_breakpoint): Register per-objfile data key. |
| |
| 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate |
| parameter value. |
| (create_longjmp_master_breakpoint): Loop over longjmp names. |
| (create_std_terminate_master_breakpoint): Const-propagate parameter |
| value. |
| (update_breakpoints_after_exec): Adjust. |
| (breakpoint_re_set): Adjust. |
| |
| 2011-02-15 Michael Snyder <msnyder@vmware.com> |
| |
| * thread.c (info_threads_command): Process arg as thread id, |
| or list of thread ids. |
| (thread_find_command): New command. |
| (_initialize_thread): Document argument for info threads. |
| Document 'thread find' command. |
| * NEWS: Document new command "thread find". |
| |
| 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'. |
| * aclocal.m4: Regenerated with aclocal-1.11.1. |
| * common/configure: Regenerate with autoconf-2.64. |
| |
| 2011-02-15 Ken Werner <ken.werner@de.ibm.com> |
| |
| * opencl-lang.c (build_opencl_types): Set the size of the built-in |
| bool data type to a size of one byte. |
| |
| 2011-02-15 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * target.c (memory_xfer_live_readonly_partial): Document where to |
| look for interface description. |
| |
| 2011-02-15 Yao Qi <yao@codesourcery.com> |
| |
| PR tdep/12352 |
| * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in |
| order to store PC value on stack instead of text section. |
| |
| 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for |
| the EFP register set size. |
| (efpr_pseudo_register_read): Use regcache_raw_read_part to read |
| data from the VMX register. |
| (efpr_pseudo_register_write): Use regcache_raw_write_part to read |
| and write data from/to the VMX register. |
| |
| 2011-02-14 Michael Snyder <msnyder@vmware.com> |
| |
| * command.h (enum command_class): New class 'no_set_class', for |
| "show" commands without a corresponding "set" command. |
| * value.c (_initialize_values): Use 'no_set_class' for "show values". |
| * copying.c (_initialize_copying): Ditto for "show copying" and |
| "show warranty". |
| * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and |
| "show version". |
| * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for |
| which there is no corresponding "set" command (eg. "show copying"). |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * exec.c (section_table_available_memory): Change `len' parameter |
| type to ULONGEST. |
| * exec.h (section_table_available_memory): Ditto. |
| * value.h (read_value_memory): Rename the `offset' parameter to |
| `embedded_offset'. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * memrange.c (compare_mem_ranges): Mention sort order in |
| describing comment. |
| (normalize_mem_ranges): Add comment. Fix ra->length calculation. |
| * tracepoint.c (traceframe_available_memory): Extend comment to |
| mention what happens to RESULT when the target does not support |
| the query. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * value.c (mark_value_bytes_unavailable): Fix indexing the `bef' |
| range. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.c (value_bits_valid, value_bits_synthetic_pointer): |
| No longer handle NULL values. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * exceptions.h (NOT_AVAILABLE_ERROR): New error. |
| * value.c: Include "exceptions.h". |
| (require_available): Throw NOT_AVAILABLE_ERROR instead of a |
| generic error. |
| * cp-abi.c: Include gdb_assert.h. |
| (baseclass_offset): Add `embedded_offset' and `val' parameters. |
| Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR |
| errors. |
| * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val' |
| parameters. No longer returns -1 on error. |
| (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and |
| `val' parameters. |
| * cp-valprint.c: Include exceptions.h. |
| (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching |
| the baseclass_offset. Handle unavailable base classes. Use |
| val_print_invalid_address. |
| * p-valprint.c: Include exceptions.h. |
| (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors |
| when fetching the baseclass_offset. No longer expect |
| baseclass_offset returning -1. Handle unavailable base classes. |
| Use val_print_invalid_address. |
| * valops.c (dynamic_cast_check_1): Rename `contents' parameter to |
| `valaddr' parameter, and change its type to gdb_byte pointer. Add |
| `embedded_offset' and `val' parameters. Adjust. |
| (dynamic_cast_check_2): Rename `contents' parameter to `valaddr' |
| parameter, and change its type to gdb_byte pointer. Add |
| `embedded_offset' and `val' parameters. Adjust. No longer expect |
| baseclass_offset returning -1. |
| (value_dynamic_cast): Use value_contents_for_printing rather than |
| value_contents. Adjust. |
| (search_struct_field): No longer expect baseclass_offset returning |
| -1. |
| (search_struct_method): If reading memory from the target is |
| necessary, wrap it in a new value to pass to baseclass_offset. No |
| longer expect baseclass_offset returning -1. |
| (find_method_list): No longer expect baseclass_offset returning |
| -1. Use value_contents_for_printing rather than value_contents. |
| * valprint.c (val_print_invalid_address): New function. |
| * valprint.h (val_print_invalid_address): Declare. |
| * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset' |
| and `val' parameters. No longer expect baseclass_offset returning |
| -1. Adjust. |
| * gnu-v2-abi.c: Include "exceptions.h". |
| (gnuv2_baseclass_offset): Add `embedded_offset' and `val' |
| parameters. Handle unavailable memory. Recurse through |
| gnuv2_baseclass_offset directly, rather than through |
| baseclass_offset. No longer returns -1 on not found, instead |
| throw an error. |
| * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and |
| `val' parameters. Adjust. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (memrange_sortmerge): Don't merge ranges that are |
| almost but not quite adjacent. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.h (value_entirely_available): Declare. |
| * value.c (value_entirely_available): New function. |
| * c-valprint.c (c_value_print): Don't try fetching the pointer's |
| real type if the pointer is unavailable. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * valops.c (value_repeat): Use read_value_memory instead of |
| read_memory. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.h (value_contents_copy, value_contents_copy_raw): Declare. |
| * value.c (value_contents_copy_raw, value_contents_copy): New |
| functions. |
| (value_primitive_field): Use value_contents_copy_raw instead of |
| memcpy. |
| * valops.c (value_fetch_lazy): Use value_contents_copy instead of |
| memcpy. |
| (value_array, value_slice): Ditto. |
| * valarith.c (value_subscripted_rvalue): Use |
| value_contents_copy_raw instead of memcpy. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| <unavailable> references. |
| |
| * valops.c (get_value_at): Use value_from_contents_and_address, |
| avoiding read_memory. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * c-valprint.c (c_val_print): Print a string with unavailable |
| contents as an array. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.h (unpack_bits_as_long): Delete declaration. |
| (unpack_value_bits_as_long): Declare. |
| (unpack_value_field_as_long): Declare. |
| (value_field_bitfield): Declare. |
| * value.c (unpack_bits_as_long): Rename to... |
| (unpack_value_bits_as_long_1): ... this. Add embedded_offset and |
| value parameters. Return the extracted result in a new output |
| parameter. If the value contents are unavailable, return false, |
| otherwise return true. |
| (unpack_value_bits_as_long): New. |
| (unpack_field_as_long): Rename to... |
| (unpack_value_field_as_long_1): ... this. Add embedded_offset and |
| Add embedded_offset and value parameters. Return the extracted |
| result in a new output parameter. If the value contents are |
| unavailable, return false, otherwise return true. |
| (unpack_value_field_as_long): New. |
| (unpack_field_as_long_1): New. |
| (unpack_field_as_long): Reimplement as wrapper around |
| unpack_value_field_as_long_1. |
| (value_field_bitfield): New function. |
| * valops.c (value_fetch_lazy): When fetching a bitfield, use |
| unpack_value_bits_as_long. Mark the value as unavailable, if it |
| is unavailable. |
| * jv-valprint.c (java_print_value_fields): Use |
| value_field_bitfield. |
| * p-valprint.c (pascal_object_print_value_fields): Use |
| value_field_bitfield. |
| * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.c (get_internalvar_integer): Also return the int value of |
| TYPE_CODE_INT INTERNALVAR_VALUE values. |
| (set_internalvar): Don't special case TYPE_CODE_INT. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.c (struct internalvar) <enum internalvar_kind>: Remove |
| INTERNALVAR_POINTER. |
| <pointer>: Delete. |
| (value_of_internalvar): Remove INTERNALVAR_POINTER handling. |
| (set_internalvar): Remove special TYPE_CODE_PTR handling. |
| (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * value.h (value_available_contents_eq): Declare. |
| * value.c (find_first_range_overlap): New function. |
| (value_available_contents_eq): New function. |
| * valprint.c (val_print_array_elements): Use |
| value_available_contents_eq. |
| * ada-valprint.c (val_print_packed_array_elements): Use |
| value_available_contents_eq. |
| * jv-valprint.c (java_value_print): Use |
| value_available_contents_eq. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.c (target_read_live_memory): New function. |
| (memory_xfer_live_readonly_partial): New. |
| (memory_xfer_partial): If reading from a traceframe, fallback to |
| reading unavailable read-only memory from read-only regions of |
| live target memory. |
| * tracepoint.c (disconnect_tracing): Adjust. |
| (set_current_traceframe): New, factored out from |
| set_traceframe_number. |
| (set_traceframe_number): Reimplement to only change the traceframe |
| number on the GDB side. |
| (do_restore_current_traceframe_cleanup): Adjust. |
| (make_cleanup_restore_traceframe_number): New. |
| (cur_traceframe_number): New global. |
| (tfile_open): Set cur_traceframe_number to no traceframe. |
| (set_tfile_traceframe): New function. |
| (tfile_trace_find): If looking up a traceframe using any method |
| other than by number, make sure the current tfile traceframe |
| matches gdb's current traceframe. Update the current tfile |
| traceframe if the lookup succeeded. |
| (tfile_fetch_registers, tfile_xfer_partial) |
| (tfile_get_trace_state_variable_value): Make sure the remote |
| traceframe matches gdb's current traceframe. |
| * remote.c (remote_traceframe_number): New global. |
| (remote_open_1): Set it to -1. |
| (set_remote_traceframe): New function. |
| (remote_fetch_registers, remote_store_registers) |
| (remote_xfer_memory, remote_xfer_partial) |
| (remote_get_trace_state_variable_value): Make sure the remote |
| traceframe matches gdb's current traceframe. |
| (remote_trace_find): If looking up a traceframe using any method |
| other than by number, make sure the current remote traceframe |
| matches gdb's current traceframe. Update the current remote |
| traceframe if the lookup succeeded. |
| * infrun.c (fetch_inferior_event): Adjust. |
| * tracepoint.h (set_current_traceframe): Declare. |
| (get_traceframe_number, set_traceframe_number): Add describing |
| comments. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| Mark pieces of values as unavailable if the corresponding memory |
| is unavailable. |
| |
| * valops.c: Include tracepoint.h. |
| (value_fetch_lazy): Use read_value_memory. |
| (read_value_memory): New. |
| * value.h (read_value_memory): Declare. |
| * dwarf2loc.c (read_pieced_value): Use read_value_memory. |
| * exec.c (section_table_available_memory): New function. |
| * exec.h (section_table_available_memory): Declare. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * Makefile.in (SFILES): Add memrange.c. |
| (HFILES_NO_SRCDIR): Add memrange.h. |
| (COMMON_OBS): Add memrange.o. |
| * memrange.c: New file. |
| * memrange.h: New file. |
| * tracepoint.c: Include memrange.h. |
| (struct mem_range): Delete. |
| (mem_range_s): Delete. |
| (traceframe_available_memory): New function. |
| * tracepoint.h (traceframe_available_memory): Declare. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.h (struct traceframe_info): Forward declare. |
| (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO. |
| (struct target_ops) <to_traceframe_info>: New field. |
| (target_traceframe_info): New. |
| * target.c (update_current_target): Inherit and default |
| to_traceframe_info. |
| * remote.c (PACKET_qXfer_traceframe_info): New. |
| (remote_protocol_features): Register qXfer:traceframe-info:read. |
| (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO. |
| (remote_traceframe_info): New. |
| (init_remote_ops): Install it. |
| (_initialize_remote): Install "set/show remote traceframe-info" |
| commands. |
| * tracepoint.h (parse_traceframe_info): Declare. |
| * tracepoint.c (struct mem_range): New. |
| (mem_range_s): New typedef. |
| (struct traceframe_info): New. |
| (traceframe_info): New global. |
| (free_traceframe_info): New function. |
| (clear_traceframe_info): New function. |
| (start_tracing, tfind_1, set_traceframe_number): Clear traceframe |
| info. |
| (build_traceframe_info): New function. |
| (tfile_traceframe_info): New function. |
| (init_tfile_ops): Install tfile_traceframe_info. |
| (traceframe_info_start_memory, free_result): New functions. |
| (memory_attributes, traceframe_info_elements): New globals. |
| (parse_traceframe_info, get_traceframe_info): New functions. |
| * features/traceframe-info.dtd: New file. |
| * Makefile.in (XMLFILES): Add traceframe-info.dtd. |
| |
| 2011-02-14 Pedro Alves <pedro@codesourcery.com> |
| |
| Base support for <unavailable> value contents. |
| |
| * value.h (value_bytes_available): Declare. |
| (mark_value_bytes_unavailable): Declare. |
| * value.c (struct range): New struct. |
| (range_s): New typedef. |
| (ranges_overlap): New function. |
| (range_lessthan): New function. |
| (ranges_contain_p): New function. |
| (struct value) <unavailable>: New field. |
| (value_bytes_available): New function. |
| (mark_value_bytes_unavailable): New function. |
| (require_not_optimized_out): Constify parameter. |
| (require_available): New function. |
| (value_contents_all, value_contents): Require all bytes be |
| available. |
| (value_free): Free `unavailable'. |
| (value_copy): Copy `unavailable'. |
| * valprint.h (val_print_unavailable): Declare. |
| * valprint.c (valprint_check_validity): Rename `offset' parameter |
| to `embedded_offset'. If printing a scalar, check whether the |
| value chunk is available. |
| (val_print_unavailable): New. |
| (val_print_scalar_formatted): Check whether the value is |
| available. |
| * python/py-prettyprint.c (apply_val_pretty_printer): Refuse |
| pretty-printing unavailable values. |
| |
| 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix const/volatile qualifiers of C++ types, PR c++/12328. |
| * c-typeprint.c (c_type_print_args): Update the function comment. New |
| variable param_type, initialize it. Remove const/volatile qualifiers |
| for language_cplus and !show_artificial. Use param_type. |
| |
| 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symtab.c (find_pc_sect_line): New variable objfile, initialize it |
| from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S. |
| * symtab.h (struct symtab) <next>: Comment extension. |
| |
| 2011-02-12 Yao Qi <yao@codesourcery.com> |
| |
| * Makefile.in (CLEANDIRS): Remove duplicated common dir. |
| |
| 2011-02-11 Yao Qi <yao@codesourcery.com> |
| |
| * common/Makefile.in: Add copyright header. |
| |
| 2011-02-11 Pedro Alves <pedro@codesourcery.com> |
| |
| * infrun.c (proceed): Move switching out and in of tfind mode from |
| here ... |
| (fetch_inferior_event): ... to here. |
| |
| 2011-02-11 Yao Qi <yao@codesourcery.com> |
| |
| * Makefile.in: Remove signals.o from COMMON_OBS. Link |
| libcommon.a. |
| * configure.ac: Add common to sub dir. |
| * configure: Regenerate. |
| |
| 2011-02-11 Yao Qi <yao@codesourcery.com> |
| |
| Build libcommon.a. |
| |
| * common/Makefile.in: New. |
| * common/configure.ac: New. |
| * common/aclocal.m4: New. |
| * common/configure: Generate. |
| |
| 2011-02-10 Pedro Alves <pedro@codesourcery.com> |
| |
| * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right |
| side of the parenthesis. |
| |
| Merge from GCC: |
| 2010-07-13 Jakub Jelinek <jakub@redhat.com> |
| * vec.h (VEC_block_remove): Fix comment. |
| |
| 2011-02-08 Michael Snyder <msnyder@vmware.com> |
| |
| * linux-nat.c (linux_nat_filter_event): Fix typo in comment. |
| |
| 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes |
| in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd, |
| psubd and paddd. |
| |
| 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| PR 12361. |
| * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to |
| phsubsw. |
| (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0. |
| (i386_process_record) <0x0f3807>: Fix the comment to phsubsw. |
| |
| 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * dwarf2read.c (read_subroutine_type): Set special calling |
| convention flag for functions compiled by IBM XL C for OpenCL. |
| * ppc-sysv-tdep.c: Include "dwarf2.h" |
| (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types |
| calling convention. |
| (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement |
| IBM OpenCL vector types calling convention. |
| (ppc_sysv_abi_return_value): Pass through FUNC_TYPE. |
| (ppc_sysv_abi_broken_return_value): Likewise. |
| (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector |
| types calling convention. |
| (ppc64_sysv_abi_return_value): Likewise. |
| * spu-tdep.c: Include "dwarf2.h" |
| (spu_return_value): Implement IBM OpenCL vector types calling |
| convention. |
| |
| 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement |
| correct ABI for AltiVec vector arguments. |
| |
| 2011-02-07 Pedro Alves <pedro@codesourcery.com> |
| |
| * valprint.c (val_print): Extend comment. |
| * ada-valprint.c (ada_valprint): Rewrite comment deferring |
| interface explanation to val_print. |
| (ada_val_print_array): Adjust comment to current interface. |
| (print_field_values): Adjust comment to current interface. |
| * c-valprint.c (c_val_print): Rewrite comment deferring interface |
| explanation to val_print. |
| * f-valprint.c (f_val_print): Ditto. |
| * jv-valprint.c (java_val_print): Ditto. |
| * m2-valprint.c (m2_val_print): Ditto. |
| * p-valprint.c (pascal_val_print): Ditto. |
| |
| 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (parse_breakpoint_sals): Fix description. |
| |
| 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com> |
| Oguz Kayral <oguzkayral@gmail.com> |
| |
| * python/py-inferior.c (python_on_normal_stop): New function. |
| (python_on_resume): New function. |
| (python_inferior_exit): New function. |
| (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and |
| inferior_exit observers. |
| * python/py-evtregistry.c: New file. |
| * python/py-threadevent.c : New file. |
| * python/py-event.c: New file. |
| * python/py-evts.c: New file. |
| * python/py-continueevent.c: New file. |
| * python/py-bpevent.c: New file. |
| * python/py-signalevent.c: New file. |
| * python/py-exetiedevent.c: New file. |
| * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function. |
| Move struct breakpoint_object from here... |
| * python/python-internal.h: ... to here. |
| * python/py-event.h: New file. |
| * python/py-events.h: New file. |
| * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o, |
| py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o, |
| py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o. |
| (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c, |
| py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c, |
| py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c. |
| Add build rules for all the above. |
| |
| 2011-02-04 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (dwarf2_section_empty_p): New function. |
| (dwarf2_read_section): Use dwarf2_section_empty_p. |
| (dwarf2_section_size): New function. |
| (dwarf2_get_section_info): Unconditionally read section. |
| (dwarf2_read_index): Use dwarf2_section_empty_p. |
| (partial_read_comp_unit_head): Use dwarf2_section_size. |
| (dwarf2_symbol_mark_computed): Likewise. |
| |
| 2011-02-04 David Daney <ddaney@caviumnetworks.com> |
| |
| * NEWS: Add item for "catch syscall" on mips*-linux* targets. |
| |
| 2011-02-04 David Daney <ddaney@caviumnetworks.com> |
| |
| * mips-linux-tdep.c: Include xml-syscall.h. |
| (mips_linux_get_syscall_number): New function. |
| (mips_linux_init_abi): Add calls to |
| mips_linux_get_syscall_number() and set_xml_syscall_file_name(). |
| * data-directory/Makefile.in (SYSCALLS_FILES): Add |
| mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml |
| * syscalls/mips-n32-linux.xml: New file. |
| * syscalls/mips-n64-linux.xml: New file. |
| * syscalls/mips-o32-linux.xml: New file. |
| |
| 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries. |
| Complain about inverted range entries. |
| (dwarf2_record_block_ranges): Likewise. |
| |
| 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| Fix some typos. |
| * breakpoint.c (update_watchpoint): Fix name of the |
| update_global_location_list function. |
| (print_one_breakpoint): Fix typo. |
| (_initialize_breakpoint): Remove extra space in hbreak help |
| string. |
| * breakpoint.h (struct bp_location) <length>: Fix field |
| description. |
| |
| 2011-02-04 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (registers_changed_ptid): Don't explictly always |
| clear `current_regcache'. Only clear current_thread_ptid and |
| current_thread_arch when PTID matches. Only reinit the frame |
| cache if PTID matches the current inferior_ptid. Move alloca(0) |
| call to ... |
| (registers_changed): ... here. |
| |
| 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that |
| starts with __stack_chk_guard as stack guard symbol. |
| |
| 2011-02-03 Andrew Burgess <aburgess@broadcom.com> |
| |
| * disasm.c (compare_lines): Handle the end of sequence markers |
| within the line table to better support disassembling over |
| compilation unit boundaries. |
| |
| 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB |
| arguments. Skip in-prologue calls to glibc __aeabi_read_tp |
| implementation even if no symbols are available. |
| (thumb_analyze_prologue): Update call to skip_prologue_function. |
| (arm_analyze_prologue): Likewise. |
| |
| 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c: Include "observer.h". |
| (arm_prologue_this_id): Use frame PC if get_frame_func returns 0. |
| (arm_exidx_data_key): New static variable. |
| (struct arm_exidx_entry, arm_exidx_entry_s): New data types. |
| (struct arm_exidx_data): Likewise. |
| (arm_exidx_data_free): New function. |
| (arm_compare_exidx_entries): Likewise. |
| (arm_obj_section_from_vma): Likewise. |
| (arm_exidx_new_objfile): Likewise. |
| (arm_find_exidx_entry): Likewise. |
| (arm_exidx_fill_cache): Likewise. |
| (arm_exidx_unwind_sniffer): Likewise. |
| (arm_exidx_unwind): New global variable. |
| (arm_gdbarch_init): Append unwinder arm_exidx_unwind. |
| (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile |
| observer. Register arm_exidx_data_key as objfile data. |
| |
| 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org> |
| |
| * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break |
| due to accessing uninitialized variable. Fix indentation. |
| |
| 2011-02-02 Pedro Alves <pedro@codesourcery.com> |
| |
| * c-valprint.c (c_value_print): When doing virtual base pointer |
| adjustment, create a new value with adjusted contents rather than |
| changing the contents of the value being printed (and getting it |
| wrong). |
| |
| 2011-02-02 Pedro Alves <pedro@codesourcery.com> |
| |
| * xml-support.c (xml_find_attribute): New. |
| (xinclude_start_include): Use it. |
| * xml-support.h (xml_find_attribute): Declare. |
| * memory-map.c (memory_map_start_memory) |
| (memory_map_start_property): Use xml_find_attribute. |
| * osdata.c (osdata_start_osdata, osdata_start_column): Use |
| xml_find_attribute. |
| * remote.c (start_thread): Use xml_find_attribute. |
| * solib-target.c (library_list_start_segment) |
| (library_list_start_section, library_list_start_library) |
| (library_list_start_list): Use xml_find_attribute. |
| * xml-tdesc.c (tdesc_start_target, tdesc_start_feature) |
| (tdesc_start_union, tdesc_start_struct, tdesc_start_flags) |
| (tdesc_start_field): Use xml_find_attribute. |
| |
| 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * opencl-lang.c (STRINGIFY): Rename to OCL_STRING. |
| (BUILD_OCL_VTYPES): Update. |
| |
| 2011-02-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac: Work around non-GNU sed limitation when computing |
| python version number. |
| * configure: Regenerate. |
| |
| 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix debug printing of TYPE_INSTANCE. |
| * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New. |
| (dump_subexp_body_standard) <TYPE_INSTANCE>: New. |
| |
| 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL, |
| OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME, |
| OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT. |
| * ada-operator.inc: Rename the file to ... |
| * ada-operator.def: ... here, wrap all the entries by macro OP. |
| * expprint.c (op_name_standard): Remove all the entries. Include |
| "std-operator.def" instead. |
| * expression.h (enum exp_opcode): Include "std-operator.def" and |
| "ada-operator.def". Move all the entries ... |
| * std-operator.def: ... here, wrap all the entries by macro OP. |
| |
| 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| * breakpoint.h (remove_jit_event_breakpoints): New prototype. |
| * breakpoint.c (remove_jit_event_breakpoints): New function. |
| * jit.c (jit_descriptor_addr): Delete. |
| (registering_code): Delete. |
| (clear_int): Delete. |
| (jit_inferior_data): New variable. |
| (struct jit_inferior_data): New type. |
| (get_jit_inferior_data): New function. |
| (jit_inferior_data_cleanup): New function. |
| (jit_read_descriptor): Adjust. |
| (jit_register_code): Adjust. |
| (jit_breakpoint_re_set_internal): New function; move code here ... |
| (jit_inferior_init): ... from here. |
| (jit_breakpoint_re_set): Adjust. |
| (jit_reset_inferior_data_and_breakpoints): New function. |
| (jit_inferior_created_observer): Adjust. |
| (jit_inferior_exit_hook): Adjust. |
| (jit_executable_changed_observer): New function. |
| (jit_event_handler): Adjust. |
| (_initialize_jit): Adjust. |
| |
| 2011-01-31 Michael Snyder <msnyder@vmware.com> |
| |
| * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted |
| line. |
| |
| 2011-01-31 Tom Tromey <tromey@redhat.com> |
| |
| PR python/12216: |
| * python/python.c (execute_gdb_command): Call |
| prevent_dont_repeat. |
| * top.c (suppress_dont_repeat): New global. |
| (dont_repeat): Use it. |
| (prevent_dont_repeat): New function. |
| * command.h (prevent_dont_repeat): Declare. |
| |
| 2011-01-31 Tom Tromey <tromey@redhat.com> |
| |
| * infcmd.c (finish_backward): Use breakpoint_set_silent. |
| * python/py-breakpoint.c (bppy_set_silent): Use |
| breakpoint_set_silent. |
| (bppy_set_thread): Use breakpoint_set_thread. |
| (bppy_set_task): Use breakpoint_set_task. |
| * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread) |
| (breakpoint_set_task): Declare. |
| (make_breakpoint_silent): Remove. |
| * breakpoint.c (breakpoint_set_silent): New function. |
| (breakpoint_set_thread): Likewise. |
| (breakpoint_set_task): Likewise. |
| (make_breakpoint_silent): Remove. |
| |
| 2011-01-31 Tom Tromey <tromey@redhat.com> |
| |
| * breakpoint.h (user_breakpoint_p): Declare. |
| * breakpoint.c (user_breakpoint_p): New function. |
| (breakpoint_1): Use it. |
| (save_breakpoints): Likewise. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac: Add handling of Python distribution on Windows. |
| * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED |
| sysconfig variables are not defined, then do not use them. |
| On Windows, if LIBPL is not defined, then use prefix + '/libs' |
| instead. On Windows, return all paths using forward-slashes |
| rather than backslashes. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac: Remove fallback behavior for building |
| against Python. Remove tweaking of Python include path. |
| Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution. |
| (AC_TRY_LIBPYTHON): Adjust program used in linking test. |
| If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS. |
| Always restore CPPFLAGS and LIBS after linking test. |
| * configure: Regenerated. |
| * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@. |
| (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@. |
| * python/python-internal.h: Adjust includes of Python .h files. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup |
| in error message. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode |
| value test. |
| |
| 2011-01-31 Yao Qi <yao@codesourcery.com> |
| |
| * arm-linux-nat.c: Update calls to regcache_register_status |
| instead of regcache_valid_p. |
| * aix-thread.c: Likewise. |
| * i386gnu-nat.c: Likewise. |
| |
| 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix crash. |
| * valops.c (compare_parameters): Verify TYPE_NFIELDS before |
| touching TYPE_FIELD_ARTIFICIAL. |
| |
| 2011-01-28 Richard Earnshaw <rearnsha@arm.com> |
| |
| * MAINTAINERS: Move myself from Responsible Maintainers to Authorized |
| Committers. |
| |
| 2011-01-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (tfile_xfer_partial): If there's no traceframe |
| selected, don't try iterating over the traceframe's blocks. |
| (tfile_has_stack): If there's no traceframe selected, then there's |
| no stack. |
| (tfile_has_registers): If there's no traceframe selected, then |
| there's no registers. |
| |
| 2011-01-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.c (memory_xfer_partial): No need to restore shadows if we |
| haven't read anything. |
| |
| 2011-01-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * mips-tdep.c (mips_print_register): Use get_frame_register_value |
| and val_print_scalar_formatted. |
| |
| 2011-01-27 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (tfile_read): New. |
| (tfile_open): Use it. |
| (tfile_get_traceframe_address): Use it. |
| (tfile_trace_find): Use it. |
| (walk_blocks_callback_func): New typedef. |
| (match_blocktype): New function. |
| (traceframe_walk_blocks): New function. |
| (traceframe_find_block_type): New function. |
| (tfile_fetch_registers, tfile_xfer_partial) |
| (tfile_get_trace_state_variable_value): Use |
| traceframe_find_block_type and tfile_read. |
| |
| 2011-01-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * remote-mips.c: Add internationalization mark ups. Remove |
| trailing \n from already marked up strings. |
| |
| 2011-01-26 Tom Tromey <tromey@redhat.com> |
| |
| * python/py-prettyprint.c (print_string_repr): Clear |
| 'addressprint' option when calling val_print_string. |
| (print_children): Handle Val_pretty_default. Clear 'addressprint' |
| option when calling val_print_string. |
| |
| 2011-01-26 Tom Tromey <tromey@redhat.com> |
| |
| * python/python.c (gdbpy_solib_name): Use gdb_py_longest and |
| GDB_PY_LL_ARG. |
| * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New |
| macros. |
| (gdb_py_longest, gdb_py_ulongest): New typedefs. |
| (gdb_py_long_from_longest, gdb_py_long_from_ulongest) |
| (gdb_py_long_as_ulongest): New defines. |
| (gdb_py_object_from_longest, gdb_py_object_from_ulongest) |
| (gdb_py_int_as_long): Declare. |
| * python/py-value.c (valpy_lazy_string): Use gdb_py_longest, |
| GDB_PY_LL_ARG, gdb_py_object_from_longest. |
| (valpy_long): Add comment. |
| * python/py-utils.c (get_addr_from_python): Use |
| gdb_py_long_as_ulongest. Handle overflow properly. |
| (gdb_py_object_from_longest): New function. |
| (gdb_py_object_from_ulongest): Likewise. |
| (gdb_py_int_as_long): Likewise. |
| * python/py-type.c (typy_array): Use gdb_py_int_as_long. |
| * python/py-symtab.c (salpy_get_pc): Use |
| gdb_py_long_from_ulongest. |
| (salpy_get_line): Use PyInt_FromLong. |
| * python/py-param.c (set_parameter_value): Use |
| gdb_py_int_as_long. |
| * python/py-lazy-string.c (stpy_get_address): Use |
| gdb_py_long_from_ulongest. |
| * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest. |
| * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long. |
| * python/py-breakpoint.c (bppy_set_thread): Use |
| gdb_py_int_as_long. |
| (bppy_set_task): Likewise. |
| (bppy_set_ignore_count): Likewise. |
| (bppy_set_hit_count): Likewise. |
| * python/py-block.c (blpy_get_start): Use |
| gdb_py_object_from_ulongest. |
| (blpy_get_end): Likewise. |
| (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG. |
| |
| 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr> |
| |
| PR/symtab 11766: |
| * gdb/objfiles.h (struct objfile) <addr_low>: New field. |
| * gdb/solib.c (solib_read_symbols): Check for addr_low in |
| equality test for objfile, initialize addr_low if needed. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * tui/tui-regs.c (tui_register_format): Remove dead code. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * printcmd.c (print_formatted): Use val_print_scalar_formatted |
| instead of print_scalar_formatted. |
| (print_scalar_formatted): Don't handle 's' format strings here, |
| and add an assertion that we never see such format here. |
| * valprint.h (val_print_scalar_formatted): Declare. |
| * valprint.c (val_print_scalar_formatted): New. |
| * c-valprint.c (c_val_print): Use val_print_scalar_formatted |
| instead of print_scalar_formatted. |
| * jv-valprint.c (java_val_print): Ditto. |
| * p-valprint.c (pascal_val_print): Ditto. |
| * ada-valprint.c (ada_val_print_1): Ditto. |
| * f-valprint.c (f_val_print): Ditto. |
| * infcmd.c (registers_info): Ditto. |
| * m2-valprint.c (m2_val_print): Ditto. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * m2-valprint.c (print_unbounded_array): Pass |
| value_contents_for_printing rather than value_contents, to |
| m2_print_array_contents. Also pass in the value. |
| |
| 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index) |
| (save_gdb_index_command): Switch to .gdb_index version 4. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * mi/mi-main.c (get_register): Use get_frame_register_value rather |
| than frame_register, and always pass a valid value to val_print. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| Centralize printing "<optimized out>". |
| |
| * valprint.h (val_print_optimized_out): Declare. |
| * cp-valprint.c (cp_print_value_fields): Use |
| val_print_optimized_out. |
| * jv-valprint.c (java_print_value_fields): Ditto. |
| * p-valprint.c (pascal_object_print_value_fields): Ditto. |
| * printcmd.c (print_formatted): Ditto. |
| * valprint.c (valprint_check_validity): Ditto. |
| (value_check_printable): Ditto. |
| (val_print_optimized_out): New. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * infcmd.c (default_print_registers_info): Allocate values so to |
| never pass a NULL value to val_print. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * cp-valprint.c (cp_print_value): Treat the 'skip' local as |
| boolean. Make sure to always pass a value that matches the |
| contents buffer to callees. Preserve `address' for following |
| iterations. |
| * value.c (value_contents_for_printing_const): New. |
| (value_address): Constify value argument. |
| * value.h (value_contents_for_printing_const): Declare. |
| (value_address): Constify value argument. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (struct regcache_descr): Rename |
| sizeof_raw_register_valid_p field to sizeof_raw_register_status, |
| and sizeof_cooked_register_valid_p to |
| sizeof_cooked_register_status. |
| (init_regcache_descr): Adjust. |
| (struct regcache): Rename register_valid_p field to |
| register_status. |
| (regcache_xmalloc_1, regcache_xfree, regcache_save) |
| (do_cooked_read): Adjust. |
| (regcache_valid_p): Rename to ... |
| (regcache_register_status): ... this. Adjust. |
| (regcache_invalidate): Adjust. |
| (regcache_raw_read, regcache_cooked_read, regcache_raw_write): |
| Adjust. |
| (regcache_raw_supply): Adjust. If buf i NULL, mark the register |
| as unavailable, not valid. |
| (regcache_dump): Adjust. |
| * regcache.h (enum register_status): New. |
| (regcache_register_status): Declare. |
| (regcache_invalidate): Delete declaration. |
| * corelow.c (get_core_registers): Adjust. |
| * tracepoint.c (tfile_fetch_registers): Adjust. |
| * trad-frame.c (REG_VALUE): Rename to ... |
| (TF_REG_VALUE): ... this. |
| (REG_UNKNOWN): Rename to ... |
| (TF_REG_UNKNOWN): ... this. |
| (trad_frame_set_value, trad_frame_set_unknown): Adjust. |
| * mi/mi-main.c (register_changed_p): Adjust. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (struct regcache_descr): Remove outdated comment. |
| (init_regcache_descr): Remove sizeof_raw_register_valid_p |
| overallocate hack. |
| (regcache_xmalloc): Rename to ... |
| (regcache_xmalloc_1): ... this. Add `readonly_p' parameter. |
| Allocate the regcache type accordingly. |
| (regcache_xmalloc): New as wrapper around regcache_xmalloc_1. |
| (regcache_xfree): Asser the source is also readonly. Copy sizeof |
| cooked registers, not raw. |
| (regcache_dup_no_passthrough): Delete. |
| (get_thread_arch_regcache): Use regcache_xmalloc_1. |
| * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not |
| mention obsolete write_register_bytes. |
| * regcache.h (regcache_dup_no_passthrough): Delete declaration. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| Stop remote_read_bytes from handling partial reads itself. |
| |
| * remote-fileio.c: Include target.h. |
| (remote_fileio_write_bytes): Delete. |
| (remote_fileio_func_open, remote_fileio_func_write) |
| (remote_fileio_func_rename, remote_fileio_func_unlink): Use |
| target_read_memory. |
| (remote_fileio_func_stat): Use target_read_memory and |
| target_write_memory. |
| (remote_fileio_func_gettimeofday): Use target_write_memory. |
| (remote_fileio_func_system): Use target_read_memory. |
| * remote.c (remote_write_bytes): Make it static. |
| (remote_read_bytes): Don't handle partial reads here. |
| * remote.h (remote_read_bytes): Delete declaration. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| Simplify XML parsing a bit. |
| |
| * xml-support.h (gdb_xml_parse_quick): Declare. |
| * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed |
| from gdb_xml_create_parser_and_cleanup, and added `old_chain' |
| parameter. |
| (gdb_xml_create_parser_and_cleanup): Reimplement on top of |
| gdb_xml_create_parser_and_cleanup_1. |
| (gdb_xml_parse_quick): New. |
| * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick. |
| * osdata.c (osdata_parse): Ditto. |
| * remote.c (remote_threads_info): Ditto. |
| * solib-target.c (solib_target_parse_libraries): Ditto. |
| * xml-syscall.c (syscall_parse_xml): Ditto. |
| * xml-tdesc.c (tdesc_parse_xml): Ditto. |
| |
| 2011-01-24 Kevin Buettner <kevinb@redhat.com> |
| |
| * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but |
| with remote-mips.o added to gdb_target_obs. |
| * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o. |
| |
| 2011-01-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * ada-valprint.c (val_print_packed_array_elements): Pass the |
| correct struct value to val_print. |
| (ada_val_print_1): Ditto. |
| |
| 2011-01-24 Pedro Alves <pedro@codesourcery.com> |
| |
| Don't lose embedded_offset in printing routines throughout. |
| |
| * valprint.h (val_print_array_elements): Change prototype. |
| * valprint.c (val_print_array_elements): Add `embedded_offset' |
| parameter, and adjust to pass it down to val_print, while passing |
| `valaddr' or `address' unmodified. Take embedded_offset into |
| account when checking repetitions. |
| * c-valprint.c (c_val_print): Pass embedded_offset to |
| val_print_array_elements instead of adjusting `valaddr' and |
| `address'. |
| * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass |
| embedded_offset to val_print_array_elements instead of adjusting |
| `valaddr'. |
| * p-lang.h (pascal_object_print_value_fields): Adjust prototype. |
| * p-valprint.c (pascal_val_print): Pass embedded_offset to |
| val_print_array_elements and pascal_object_print_value_fields |
| instead of adjusting `valaddr'. |
| (pascal_object_print_value_fields): Add `offset' parameter, and |
| adjust to use it. |
| (pascal_object_print_value): Add `offset' parameter, and adjust to |
| use it. |
| (pascal_object_print_static_field): Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| * ada-valprint.c (val_print_packed_array_elements): Add `offset' |
| parameter, and adjust to use it. Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| (ada_val_print): Rename `valaddr0' parameter to `valaddr'. |
| (ada_val_print_array): Add `offset' parameter, and adjust to use |
| it. |
| (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and |
| `embedded_offset' to `offset'. Don't re-adjust `valaddr'. |
| Instead work with offsets. Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. Change `defer_val_int' local type to CORE_ADDR, |
| and use value_from_pointer to extract a target pointer, rather |
| than value_from_longest. |
| (print_variant_part): Add `offset' parameter. Replace |
| `outer_valaddr' parameter by a new `outer_offset' parameter. |
| Don't re-adjust `valaddr'. Instead pass down adjusted offsets. |
| (ada_value_print): Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| (print_record): Add `offset' parameter, and adjust to pass it |
| down. |
| (print_field_values): Add `offset' parameter. Replace |
| `outer_valaddr' parameter by a new `outer_offset' parameter. |
| Don't re-adjust `valaddr'. Instead pass down adjusted offsets. |
| Use value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| * d-valprint.c (dynamic_array_type): Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| * jv-valprint.c (java_print_value_fields): Add `offset' parameter. |
| Don't re-adjust `valaddr'. Instead pass down adjusted offsets. |
| (java_print_value_fields): Take `offset' into account. Don't |
| re-adjust `valaddr'. Instead pass down adjusted offsets. |
| (java_val_print): Take `embedded_offset' into account. Pass it to |
| java_print_value_fields. |
| * f-valprint.c (f77_print_array_1): Add `embedded_offset' |
| parameter. Don't re-adjust `valaddr' or `address'. Instead pass |
| down adjusted offsets. |
| (f77_print_array): Add `embedded_offset' parameter. Pass it down. |
| (f_val_print): Take `embedded_offset' into account. |
| |
| 2011-01-21 Joel Brobecker <brobecker@adacore.com> |
| |
| * inflow.c: Include "gdbcmd.h". |
| (interactive_mode): New static global, moved here from top.c. |
| (show_interactive_mode): New function, moved here from top.c. |
| use gdb_has_a_terminal instead of input_from_terminal_p to |
| determine the current mode. |
| (gdb_has_a_terminal): Add handling of the "iteractive-mode" |
| setting. |
| (_initialize_inflow): Add the "set/show interactive-mode" |
| commands. Moved here from top.c, after having adjusted slightly |
| the help text. |
| * top.c (interactive_mode, show_interactive_mode): Delete, moved |
| to inflow.c. |
| (input_from_terminal_p): Remove handling of "interactive-mode" |
| setting, moved to infow.c. |
| (init_main): Remove creation of the "set/show interactive-mode" |
| commands, moved to inflow.c. |
| |
| 2011-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Add entry for native ia64-hpux support. |
| |
| 2011-01-19 Tom Tromey <tromey@redhat.com> |
| |
| PR mi/8618: |
| * thread.c (free_thread): Free 'name'. |
| (print_thread_info): Emit thread name. Change CLI output. |
| (thread_name_command): New function. |
| (do_captured_thread_select): Emit newline. |
| (_initialize_thread): Register 'thread name' command. |
| * target.h (struct target_ops) <to_thread_name>: New field. |
| (target_thread_name): New macro. |
| * target.c (update_current_target): Handle to_thread_name. |
| * python/py-infthread.c (thpy_get_name): New function. |
| (thpy_set_name): Likewise. |
| (thread_object_getset): Add "name". |
| * linux-nat.c (linux_nat_thread_name): New function. |
| (linux_nat_add_target): Set to_thread_name. |
| * gdbthread.h (struct thread_info) <name>: New field. |
| |
| 2011-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast. |
| (ada_val_print_1): Likewise. |
| |
| 2011-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue |
| upper limit address is not greater than the function end address |
| when the upper limit could not be computed using the debugging |
| info. |
| |
| 2011-01-17 Tom Tromey <tromey@redhat.com> |
| |
| * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use |
| get_regcomp_error. |
| * utils.c: Include gdb_regex.h. |
| (do_regfree_cleanup): New function. |
| (make_regfree_cleanup): Likewise. |
| (get_regcomp_error): Likewise. |
| * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare. |
| |
| 2011-01-17 Tom Tromey <tromey@redhat.com> |
| |
| * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call |
| re_compile_fastmap. |
| |
| 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE |
| for internal variables. |
| (last_was_structop): New static variable. |
| (COMPLETE): New token. |
| (field_exp): New rule to group all '.' suffix handling. |
| Add mark_struct_expression calls when approriate to be able |
| to correctly find fields for completion. |
| (yylex): Adapt to handle field completion and set INTVAR when |
| required. |
| |
| 2011-01-14 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.c (arm_register_reggroup_p): FPS register is in |
| save_reggroup, restore_reggroup and all_reggroup. |
| |
| 2011-01-14 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint. (ada_printchar): Use the correct type length |
| in call to ada_emit_char. |
| * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR. |
| |
| 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * solib-som.h (hpux_major_release): Declare variable here. |
| * solib-som.c: Remove <sys/utsname.h> header. |
| (DEFAULT_HPUX_MAJOR_RELEASE): New macro. |
| (hpux_major_release): Make global, change default value to |
| DEFAULT_HPUX_MAJOR_RELEASE. |
| (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE. |
| * hppa-hpux-nat.c: Add <sys/utsname.h> include. |
| Add "solib-som.h" header. |
| (set_hpux_major_release): New function. |
| (_initialize_hppa_hpux_nat): Call set_hpux_major_release. |
| |
| 2011-01-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.tgt (*-*-uclinux*): Match more Linux os targets |
| |
| 2011-01-14 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing |
| new-line at end of warning message. |
| (ia64_hpux_store_register): Remove trailing new-line at end of |
| error message. |
| * ia64-hpux-tdep.c: Rephrase comment. |
| * solib-ia64-hpux.c (struct dld_info): Change type of field |
| dld_flags from "long long" to ULONGEST. |
| |
| 2011-01-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.h (deprecated_child_ops): Delete declaration. |
| * target.c (deprecated_child_ops): Delete definition. |
| |
| 2011-01-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * Makefile.in (hpux-thread.o): Delete rule. |
| * configure.ac: Don't check for HPUX DCE threads support. |
| * configure, config.in: Regenerate. |
| * hppa-hpux-nat.c (child_suppress_run): Delete. |
| (hppa_hpux_child_can_run): Delete. |
| (_initialize_hppa_hpux_nat): Don't override to_can_run. |
| * hpux-thread.c: Delete. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * hpux-thread.c (hpux_pid_to_str): Delete. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_emit_char): Remove strange code. |
| Check that c is <= UCHAR_MAX before passing it to isascii. |
| (char_at): Do not assume that TYPE_LEN is either 1 or 2. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (input_from_terminal_p): Restrict the use of interactive_mode |
| to the case where instream is stdin. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-tdep.h (struct regcache): Forward declare. |
| (struct ia64_infcall_ops): New struct type. |
| (struct gdbarch_tdep): New fields "find_global_pointer_from_solib" |
| and "infcall_ops". |
| * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section): |
| Renames ia64_find_global_pointer. |
| (ia64_find_global_pointer, ia64_allocate_new_rse_frame) |
| (ia64_store_argument_in_slot, ia64_set_function_addr: New function. |
| (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops |
| methods. |
| (ia64_infcall_ops): New static global constant. |
| (ia64_gdbarch_init): Set tdep->infcall_ops. |
| * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function. |
| (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing. |
| * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h". |
| (ia64_hpux_dummy_code): New static global constant. |
| (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame) |
| (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr) |
| (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib): |
| New function. |
| (ia64_hpux_infcall_ops): New static global constant. |
| (ia64_hpux_init_abi): Install gdbarch and tdep methods needed |
| for inferior function calls to work properly on ia64-hpux. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS. |
| * ia64-tdep.h (struct frame_info): forward declaration. |
| (struct gdbarch_tdep): Add field size_of_register_frame. |
| * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame |
| to determine the size of the register frame. |
| (ia64_size_of_register_frame): New function. |
| (ia64_gdbarch_init): Set tdep->size_of_register_frame. |
| * ia64-hpux-tdep.c: Include "target.h" and "frame.h". |
| (IA64_HPUX_UREG_REASON): New macro. |
| (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame): |
| New functions. |
| (ia64_hpux_init_abi): Set tdep->size_of_register_frame. |
| * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function. |
| (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS |
| objects. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| Add support for ia64-hpux. |
| * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c, |
| ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files. |
| |
| * configure.host: Add handling for ia64-hpux hosts. Add associated |
| floatformats. |
| * configure.tgt: Add handling for ia64-hpux targets. |
| * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o. |
| (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h. |
| (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| [ttrace] Compute thread list immediately after attach. |
| * inf_ttrace_attach (inf_ttrace_create_threads_after_attach): |
| New subprogram. |
| (inf_ttrace_attach): Use it. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * libunwind-frame.c (libunwind_frame_cache): Do not return NULL |
| if we could not determine the frame's function address. Instead, |
| use the frame's PC, and then continue. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if |
| not already defined. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-tdep.c (ia64_struct_type_p): New function. |
| (ia64_extract_return_value): Handle integral values that are |
| less than 8 bytes long. |
| (ia64_push_dummy_call): Likewise. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-tdep.c (floatformat_ia64_ext_little): Renames |
| floatformat_ia64_ext. |
| (floatformat_ia64_ext_big): New static const. |
| (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big. |
| |
| 2011-01-12 Tom Tromey <tromey@redhat.com> |
| |
| * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error |
| messages. |
| * mi/mi-main.c (mi_cmd_thread_select): Fix error messages. |
| (mi_cmd_thread_list_ids): Likewise. |
| (mi_cmd_data_list_changed_registers): Likewise. |
| (mi_cmd_data_list_register_values): Likewise. |
| (mi_cmd_data_write_register_values): Likewise. |
| (mi_cmd_data_evaluate_expression): Likewise. |
| (mi_cmd_data_read_memory): Likewise. |
| (mi_cmd_data_read_memory_bytes): Likewise. |
| (mi_cmd_data_write_memory): Likewise. |
| (mi_cmd_enable_timings): Likewise. |
| * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages. |
| * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages. |
| (mi_cmd_var_delete): Likewise. |
| (mi_cmd_var_set_format): Likewise. |
| (mi_cmd_var_show_format): Likewise. |
| (mi_cmd_var_info_num_children): Likewise. |
| (mi_cmd_var_list_children): Likewise. |
| (mi_cmd_var_info_type): Likewise. |
| (mi_cmd_var_info_expression): Likewise. |
| (mi_cmd_var_show_attributes): Likewise. |
| (mi_cmd_var_assign): Likewise. |
| (mi_cmd_var_update): Likewise. |
| (mi_cmd_enable_pretty_printing): Likewise. |
| (mi_cmd_var_set_update_range): Likewise. |
| * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error |
| messages. |
| (mi_cmd_target_file_put): Likewise. |
| (mi_cmd_target_file_delete): Likewise. |
| * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error |
| messages. |
| (mi_cmd_stack_info_depth): Likewise. |
| (mi_cmd_stack_list_locals): Likewise. |
| (mi_cmd_stack_list_args): Likewise. |
| (mi_cmd_stack_select_frame): Likewise. |
| (mi_cmd_stack_select_frame): Likewise. |
| (mi_cmd_stack_info_frame): Likewise. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error |
| messages. |
| (mi_cmd_file_list_exec_source_files): Likewise. |
| * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages. |
| (mi_cmd_env_cd): Likewise. |
| (mi_cmd_env_path): Likewise. |
| (mi_cmd_env_dir): Likewise. |
| (mi_cmd_inferior_tty_show): Likewise. |
| * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages. |
| * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages. |
| (mi_cmd_break_watch): Likewise. |
| |
| 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace. |
| (ppc_linux_insert_hw_breakpoint): Likewise. |
| (ppc_linux_remove_hw_breakpoint): Likewise. |
| (ppc_linux_insert_watchpoint): Likewise. |
| |
| 2011-01-12 Andrew Burgess <aburgess@broadcom.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| PR fortran/11104 and DWARF unbound arrays detection. |
| * dwarf2read.c (read_subrange_type): Set zero length on unspecified |
| upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on |
| unspecified upper bound. |
| * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove |
| variables array_size_array, tmp_type and offset_item. New variable |
| array. Remove call to f77_get_upperbound. New variables array_type |
| and index. Call value_subscripted_rvalue for each dimenasion. Remove |
| the final call to deprecated_set_value_type. |
| |
| 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Make value allocations more lazy. |
| * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy |
| instead of allocate_value and set_value_lazy when possible. |
| * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy |
| instead of allocate_value and set_value_lazy. |
| * findvar.c (value_of_register_lazy): Likewise. |
| (read_var_value): Remove V preallocation, call just check_typedef in |
| advance. Move allocate_value to LOC_CONST, LOC_LABEL, |
| LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG, |
| LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of |
| set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and |
| remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy |
| in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at |
| the end, remove set_value_lazy there. |
| * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy |
| instead of allocate_value and set_value_lazy when possible. |
| * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL. |
| * value.c (allocate_computed_value): Use allocate_value_lazy instead |
| of allocate_value and set_value_lazy. |
| (value_from_contents_and_address): Use allocate_value_lazy instead of |
| allocate_value and set_value_lazy when possible. |
| |
| 2011-01-12 Andrew Burgess <aburgess@broadcom.com> |
| |
| * disasm.c (dump_insns): Support dumping opcodes for MI. |
| * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control |
| dumping of instruction opcodes. |
| |
| 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch) |
| |
| * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi' |
| appropiately. |
| |
| 2011-01-11 Tom Tromey <tromey@redhat.com> |
| |
| * thread.c (do_captured_thread_select): Emit newline before |
| printing frame. |
| |
| 2011-01-11 Michael Snyder <msnyder@vmware.com> |
| |
| * s390-tdep.c: Comment cleanup, mostly periods and spaces. |
| * score-tdep.c: Ditto. |
| * score-tdep.h: Ditto. |
| * ser-base.c: Ditto. |
| * ser-go32.c: Ditto. |
| * serial.c: Ditto. |
| * serial.h: Ditto. |
| * ser-mingw.c: Ditto. |
| * ser-pipe.c: Ditto. |
| * ser-tcp.c: Ditto. |
| * ser-unix.c: Ditto. |
| * sh64-tdep.c: Ditto. |
| * shnbsd-nat.c: Ditto. |
| * sh-tdep.c: Ditto. |
| * sh-tdep.h: Ditto. |
| * solib.c: Ditto. |
| * solib-darwin.c: Ditto. |
| * solib-frv.c: Ditto. |
| * solib.h: Ditto. |
| * solib-irix.c: Ditto. |
| * solib-osf.c: Ditto. |
| * solib-pa64.c: Ditto. |
| * solib-som.c: Ditto. |
| * solib-spu.c: Ditto. |
| * solib-sunos.c: Ditto. |
| * solib-svr4.c: Ditto. |
| * solist.h: Ditto. |
| * sol-thread.c: Ditto. |
| * somread.c: Ditto. |
| * source.c: Ditto. |
| * source.h: Ditto. |
| * sparc64-linux-tdep.c: Ditto. |
| * sparc64-tdep.c: Ditto. |
| * sparc-linux-nat.c: Ditto. |
| * sparc-linux-tdep.c: Ditto. |
| * sparc-sol2-nat.c: Ditto. |
| * sparc-sol2-tdep.c: Ditto. |
| * sparc-tdep.c: Ditto. |
| * sparc-tdep.h: Ditto. |
| * spu-tdep.c: Ditto. |
| * stabsread.c: Ditto. |
| * stabsread.h: Ditto. |
| * stack.c: Ditto. |
| * symfile.c: Ditto. |
| * symfile.h: Ditto. |
| * symmisc.c: Ditto. |
| * symtab.c: Ditto. |
| * symtab.h: Ditto. |
| * target.c: Ditto. |
| * target-descriptions.c: Ditto. |
| * target-descriptions.h: Ditto. |
| * target.h: Ditto. |
| * target-memory.c: Ditto. |
| * terminal.h: Ditto. |
| * thread.c: Ditto. |
| * top.c: Ditto. |
| * tracepoint.c: Ditto. |
| * tracepoint.h: Ditto. |
| * trad-frame.h: Ditto. |
| * typeprint.c: Ditto. |
| |
| 2011-01-11 Michael Snyder <msnyder@vmware.com> |
| |
| * ui-file.c: Comment cleanup, mostly periods and spaces. |
| * ui-file.h: Ditto. |
| * ui-out.c: Ditto. |
| * ui-out.h: Ditto. |
| * utils.c: Ditto. |
| * v850-tdep.c: Ditto. |
| * valarith.c: Ditto. |
| * valops.c: Ditto. |
| * valprint.c: Ditto. |
| * valprint.h: Ditto. |
| * value.c: Ditto. |
| * value.h: Ditto. |
| * varobj.c: Ditto. |
| * varobj.h: Ditto. |
| * vax-tdep.c: Ditto. |
| * vec.c: Ditto. |
| * vec.h: Ditto. |
| * version.h: Ditto. |
| * windows-nat.c: Ditto. |
| * windows-tdep.c: Ditto. |
| * xcoffread.c: Ditto. |
| * xcoffsolib.c: Ditto. |
| * xml-support.c: Ditto. |
| * xstormy16-tdep.c: Ditto. |
| * xtensa-tdep.c: Ditto. |
| * xtensa-tdep.h: Ditto. |
| |
| 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (resources_needed_watchpoint): Fix indentation. |
| * gdbtypes.c (is_scalar_type_recursive): Fix formatting. |
| |
| 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| Implement support for PowerPC BookE ranged watchpoints. |
| * breakpoint.h |
| (struct breakpoint_ops) <resources_needed>: New method. |
| Initialize to NULL in all existing breakpoint_ops instances. |
| (struct breakpoint) <exact>: New field. |
| (target_exact_watchpoints): Declare external global. |
| * breakpoint.c (target_exact_watchpoints): New global flag. |
| (update_watchpoint): Set b->type to bp_hardware_watchpoint and |
| b->enable_state to bp_enabled before calling |
| hw_watchpoint_used_count. |
| (hw_watchpoint_used_count): Iterate over all bp_locations in a |
| watchpoint. Call breakpoint's breakpoint_ops.resources_needed |
| if available. |
| (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte |
| if the watchpoint is exact. |
| (resources_needed_watchpoint): New function. |
| (watchpoint_breakpoint_ops): Add resources_needed_watchpoint. |
| (watch_command_1): Set b->exact if the user asked for an exact |
| watchpoint and one can be set. |
| (can_use_hardware_watchpoint): Add exact_watchpoints argument. |
| Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if |
| the user asks for an exact watchpoint and one can be set. Return |
| number of needed debug registers to watch the expression. |
| * gdbtypes.c (is_scalar_type): New function, based on |
| valprint.c:scalar_type_p. |
| (is_scalar_type_recursive): New function. |
| * gdbtypes.h (is_scalar_type_recursive): Declare. |
| * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always |
| handle regions when ranged watchpoints are available. |
| (create_watchpoint_request): New function. |
| (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use |
| create_watchpoint_request. |
| * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function. |
| (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the |
| `set powerpc' and `show powerpc' commands. |
| * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>: |
| Mention documentation comment in the target macro. |
| (target_region_ok_for_hw_watchpoint): Document return value. |
| |
| 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (update_watchpoint): Decide on using a software or |
| hardware watchpoint after the bp_locations are created. |
| |
| 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| Convert hardware watchpoints to use breakpoint_ops. |
| * breakpoint.h (breakpoint_ops) <insert>: Rename to... |
| <insert_location>: ... this. Return int instead of void. |
| Accept pointer to struct bp_location instead of pointer to |
| struct breakpoint. Adapt all implementations. |
| (breakpoint_ops) <remove>: Rename to... |
| <remove_location>: ... this. Accept pointer to struct bp_location |
| instead of pointer to struct breakpoint. Adapt all implementations. |
| * breakpoint.c (insert_catchpoint): Delete function. |
| (insert_bp_location): Call the watchpoint or catchpoint's |
| breakpoint_ops.insert method. |
| (remove_breakpoint_1): Call the watchpoint or catchpoint's |
| breakpoint_ops.remove method. |
| (insert_watchpoint, remove_watchpoint): New functions. |
| (watchpoint_breakpoint_ops): New structure. |
| (watch_command_1): Initialize the OPS field. |
| * inf-child.c (inf_child_insert_fork_catchpoint) |
| (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint) |
| (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint) |
| (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint): |
| Delete functions. |
| (inf_child_target): Remove initialization of to_insert_fork_catchpoint, |
| to_remove_fork_catchpoint, to_insert_vfork_catchpoint, |
| to_remove_vfork_catchpoint, to_insert_exec_catchpoint, |
| to_remove_exec_catchpoint and to_set_syscall_catchpoint. |
| * target.c (update_current_target): Change default implementation of |
| to_insert_fork_catchpoint, to_remove_fork_catchpoint, |
| to_insert_vfork_catchpoint, to_remove_vfork_catchpoint, |
| to_insert_exec_catchpoint, to_remove_exec_catchpoint and |
| to_set_syscall_catchpoint to return_one. |
| (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint) |
| (debug_to_insert_exec_catchpoint): Report return value. |
| * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint) |
| (to_insert_exec_catchpoint): Change declaration to return int instead |
| of void. |
| |
| 2011-01-11 Michael Snyder <msnyder@vmware.com> |
| |
| * arm-tdep.c: Internationalization. |
| * c-lang.c: Ditto. |
| * charset.c: Ditto. |
| * fork-child.c: Ditto. |
| * nto-procfs.c: Ditto. |
| * ppc-sysv-tdep.c: Ditto. |
| * procfs.c: Ditto. |
| * remote-mips.c: Ditto. |
| * remote.c: Ditto. |
| * rs6000-nat.c: Ditto. |
| * rs6000-tdep.c: Ditto. |
| * target.c: Ditto. |
| * valops.c: Ditto. |
| * value.c: Ditto. |
| * xml-support.c: Ditto. |
| * mi/mi-cmd-break.c: Ditto. |
| * mi/mi-cmd-var.c: Ditto. |
| * mi/mi-interp.c: Ditto. |
| * mi/mi-main.c: Ditto. |
| |
| 2011-01-11 Andrew Burgess <aburgess@broadcom.com> |
| |
| * remote-sim.c (gdbsim_store_register): Update API to |
| sim_store_register to check more error conditions. |
| |
| 2011-01-10 Michael Snyder <msnyder@vmware.com> |
| |
| * nto-procfs.c: Comment cleanup, mostly periods and spaces. |
| * nto-tdep.c: Ditto. |
| * nto-tdep.h: Ditto. |
| * objc-exp.y: Ditto. |
| * objc-lang.c: Ditto. |
| * objfiles.c: Ditto. |
| * objfiles.h: Ditto. |
| * observer.c: Ditto. |
| * opencl-lang.c: Ditto. |
| * osabi.c: Ditto. |
| * parse.c: Ditto. |
| * parser-defs.h: Ditto. |
| * p-exp.y: Ditto. |
| * p-lang.c: Ditto. |
| * posix-hdep.c: Ditto. |
| * ppcbug-rom.c: Ditto. |
| * ppc-linux-nat.c: Ditto. |
| * ppc-linux-tdep.c: Ditto. |
| * ppc-linux-tdep.h: Ditto. |
| * ppcnbsd-tdep.c: Ditto. |
| * ppcobsd-tdep.c: Ditto. |
| * ppcobsd-tdep.h: Ditto. |
| * ppc-sysv-tdep.c: Ditto. |
| * ppc-tdep.h: Ditto. |
| * printcmd.c: Ditto. |
| * proc-abi.c: Ditto. |
| * proc-flags.c: Ditto. |
| * procfs.c: Ditto. |
| * proc-utils.h: Ditto. |
| * progspace.h: Ditto. |
| * prologue-value.c: Ditto. |
| * prologue-value.h: Ditto. |
| * psympriv.h: Ditto. |
| * psymtab.c: Ditto. |
| * p-typeprint.c: Ditto. |
| * p-valprint.c: Ditto. |
| * ravenscar-sparc-thread.c: Ditto. |
| * ravenscar-thread.c: Ditto. |
| * ravenscar-thread.h: Ditto. |
| * record.c: Ditto. |
| * regcache.c: Ditto. |
| * regcache.h: Ditto. |
| * remote.c: Ditto. |
| * remote-fileio.c: Ditto. |
| * remote-fileio.h: Ditto. |
| * remote.h: Ditto. |
| * remote-m32r-sdi.c: Ditto. |
| * remote-mips.c: Ditto. |
| * remote-sim.c: Ditto. |
| * rs6000-aix-tdep.c: Ditto. |
| * rs6000-nat.c: Ditto. |
| * rs6000-tdep.c: Ditto. |
| |
| 2011-01-10 Michael Snyder <msnyder@vmware.com> |
| |
| * charset.c (validate): Internationalization. |
| * coffread.c (read_one_sym): Ditto. |
| * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto. |
| * h8300-tdep.c (H8300_extract_return_value): Ditto. |
| * inflow.c (new_tty): Ditto. |
| * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto. |
| * m32c-tdep.c (m32c_return_value): Ditto. |
| * mep-tdep.c (mep_store_return_value): Ditto. |
| * score-tdep.c (score7_fetch_insn): Ditto. |
| * ser-mingw.c (pipe_windows_open): Ditto. |
| * sh64-tdep.c (sh64_extract_return_value): Ditto. |
| * spu-tdep.c (spu_register_type): Ditto. |
| * tracepoint.c (trace_find_command): Ditto. |
| * valarith.c (value_pos): Ditto. |
| |
| 2011-01-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (printstr): Minor comment reformatting. |
| |
| 2011-01-08 Michael Snyder <msnyder@vmware.com> |
| |
| * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _ |
| markup. |
| |
| 2011-01-08 Michael Snyder <msnyder@vmware.com> |
| |
| * h8300-tdep.c: Comment cleanup, mostly periods and spaces. |
| * hppa-hpux-tdep.c: Ditto. |
| * hppa-linux-nat.c: Ditto. |
| * hppa-linux-tdep.c: Ditto. |
| * hppanbsd-tdep.c: Ditto. |
| * hppa-tdep.c: Ditto. |
| * hppa-tdep.h: Ditto. |
| * hpux-thread.c: Ditto. |
| * i386-cygwin-tdep.c: Ditto. |
| * i386-darwin-nat.c: Ditto. |
| * i386gnu-nat.c: Ditto. |
| * i386-linux-nat.c: Ditto. |
| * i386-linux-tdep.c: Ditto. |
| * i386-nat.c: Ditto. |
| * i386-nat.h: Ditto. |
| * i386nbsd-tdep.c: Ditto. |
| * i386-sol2-nat.c: Ditto. |
| * i386-stub.c: Ditto. |
| * i386-tdep.c: Ditto. |
| * i386-tdep.h: Ditto. |
| * i387-tdep.c: Ditto. |
| * ia64-linux-nat.c: Ditto. |
| * ia64-linux-tdep.c: Ditto. |
| * ia64-tdep.c: Ditto. |
| * infcall.c: Ditto. |
| * infcall.h: Ditto. |
| * infcmd.c: Ditto. |
| * inferior.c: Ditto. |
| * inferior.h: Ditto. |
| * infloop.c: Ditto. |
| * inflow.c: Ditto. |
| * infrun.c: Ditto. |
| * interps.c: Ditto. |
| * interps.h: Ditto. |
| * iq2000-tdep.c: Ditto. |
| * irix5-nat.c: Ditto. |
| * jit.c: Ditto. |
| * jit.h: Ditto. |
| * jv-exp.y: Ditto. |
| * jv-lang.c: Ditto. |
| * jv-lang.h: Ditto. |
| * jv-typeprint.c: Ditto. |
| * jv-valprint.c: Ditto. |
| * language.c: Ditto. |
| * language.h: Ditto. |
| * linespec.c: Ditto. |
| * linux-fork.c: Ditto. |
| * linux-nat.c: Ditto. |
| * linux-thread-db.c: Ditto. |
| * lm32-tdep.c: Ditto. |
| |
| 2011-01-08 Michael Snyder <msnyder@vmware.com> |
| |
| * m2-exp.y: Comment cleanup, mostly periods and spaces. |
| * m2-lang.c: Ditto. |
| * m2-typeprint.c: Ditto. |
| * m2-valprint.c: Ditto. |
| * m32c-tdep.c: Ditto. |
| * m32r-linux-nat.c: Ditto. |
| * m32r-rom.c: Ditto. |
| * m32r-tdep.c: Ditto. |
| * m32r-tdep.h: Ditto. |
| * m68hc11-tdep.c: Ditto. |
| * m58klinux-nat.c: Ditto. |
| * m68k-tdep.c: Ditto. |
| * m88k-tdep.c: Ditto. |
| * m88k-tdep.h: Ditto. |
| * machoread.c: Ditto. |
| * macrocmd.c: Ditto. |
| * macroexp.c: Ditto. |
| * macrotab.c: Ditto. |
| * main.c: Ditto. |
| * maint.c: Ditto. |
| * mdebugread.c: Ditto. |
| * mdebugread.h: Ditto. |
| * memattr.c: Ditto. |
| * memattr.h: Ditto. |
| * memory-map.h: Ditto. |
| * mep-tdep.c: Ditto. |
| * microblaze-rom.c: Ditto. |
| * microblaze-tdep.c: Ditto. |
| * minsyms.c: Ditto. |
| * mips-irix-tdep.c: Ditto. |
| * mips-linux-nat.c: Ditto. |
| * mips-linux-tdep.c: Ditto. |
| * mips-linux-tdep.h: Ditto. |
| * mipsnbsd-nat.c: Ditto. |
| * mipsnbsd-tdep.c: Ditto. |
| * mipsread.c: Ditto. |
| * mips-tdep.c: Ditto. |
| * mips-tdep.h: Ditto. |
| * mn10300-linux-tdep.c: Ditto. |
| * mn10300-tdep.c: Ditto. |
| * mn10300-tdep.h: Ditto. |
| * monitor.c: Ditto. |
| * monitor.h: Ditto. |
| * moxie-tdep.c: Ditto. |
| * moxie-tdep.h: Ditto. |
| * mt-tdep.c: Ditto. |
| |
| 2011-01-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name. |
| |
| 2011-01-08 Robert Millan <rmh@gnu.org> |
| |
| * fbsd-nat.c (fbsd_find_memory_regions): Fix typo. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * charset.c (_initialize_charset): Fix typo in string. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message |
| for i18n. |
| * tui/tui-layout.c (tui_set_layout_for_display_command): |
| Split line so that operator goes to beginning of line. |
| * tui/tui-winsource.c (tui_horizontal_source_scroll): Move |
| assignment out of if statement. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * ada-lang.c: Comment cleanup, mostly periods and spaces. |
| * ada-lang.h: Ditto. |
| * ada-tasks.c: Ditto. |
| * ada-valprint.c: Ditto. |
| * aix-threads.c: Ditto. |
| * alpha-linux-nat.c: Ditto. |
| * alpha-linux-tdep.c: Ditto. |
| * alpha-mdebug-tdep.c: Ditto. |
| * alpha-nat.c: Ditto. |
| * alpha-osf1-tdep.c: Ditto. |
| * alpha-tdep.c: Ditto. |
| * alphabsd-nat.c: Ditto. |
| * alphabsd-tdep.c: Ditto. |
| * amd64-darwin-tdep.c: Ditto. |
| * amd64-linux-nat.c: Ditto. |
| * amd64-linux-tdep.c: Ditto. |
| * amd64-sol2-tdep.c: Ditto. |
| * amd64-tdep.c: Ditto. |
| * amd64-fbsd-tdep.c: Ditto. |
| * amd64-nbsd-tdep.c: Ditto. |
| * amd64-obsd-tdep.c: Ditto. |
| * amd64-linux-nat.c: Ditto. |
| * amd64-linux-tdep.c: Ditto. |
| * arm-tdep.c: Ditto. |
| * arm-tdep.h: Ditto. |
| * armnbsd-nat.c: Ditto. |
| * avr-tdep.c: Ditto. |
| * bfin-tdep.c: Ditto. |
| * bsd-kvm.c: Ditto. |
| * c-typeprintc: Ditto. |
| * c-valprint.c: Ditto. |
| * coff-pe-read.h: Ditto. |
| * coffreead.c: Ditto. |
| * cris-tdep.c: Ditto. |
| * d-lang.c: Ditto. |
| * darwin-nat-info.c: Ditto. |
| * darwin-nat.c: Ditto. |
| * dbug-rom.c: Ditto. |
| * dbxread.c: Ditto. |
| * dcache.c: Ditto. |
| * dcache.h: Ditto. |
| * dec-thread.c: Ditto. |
| * defs.h: Ditto. |
| * demangle.c: Ditto. |
| * dicos-tdep.c: Ditto. |
| * dictionary.c: Ditto. |
| * dictionary.h: Ditto. |
| * dink32-rom.c: Ditto. |
| * disasm.c: Ditto. |
| * doublest.c: Ditto. |
| * dsrec.c: Ditto. |
| * dummy-frame.c: Ditto. |
| * dwarf2-frame.c: Ditto. |
| * dwarf2expr.c: Ditto. |
| * dwarf2loc.c: Ditto. |
| * dwarf2read.c: Ditto. |
| * elfread.c: Ditto. |
| * environ.c: Ditto. |
| * eval.c: Ditto. |
| * event-top.h: Ditto. |
| * exceptions.c: Ditto. |
| * exceptions.h: Ditto. |
| * exec.c: Ditto. |
| * expprint.c: Ditto. |
| * expression.h: Ditto. |
| * f-exp.y: Ditto. |
| * f-lang.c: Ditto. |
| * f-lang.h: Ditto. |
| * f-typeprint.c: Ditto. |
| * f-valprint.c: Ditto. |
| * fbsd-nat.c: Ditto. |
| * findvar.c: Ditto. |
| * fork-child.c: Ditto. |
| * frame.c: Ditto. |
| * frame.h: Ditto. |
| * frv-linux-tdep.c: Ditto. |
| * frv-tdep.c: Ditto. |
| * gcore.c: Ditto. |
| * gdb-stabs.h: Ditto. |
| * gdb_assert.h: Ditto. |
| * gdb_string.h: Ditto. |
| * gdb_thread_db.h: Ditto. |
| * gdb_wait.h: Ditto. |
| * gdbarch.sh: Ditto. |
| * gdbcore.h: Ditto. |
| * gdbthread.h: Ditto. |
| * gdbtypes.c: Ditto. |
| * gdbtypes.h: Ditto. |
| * gnu-nat.c: Ditto. |
| * gnu-nat.h: Ditto. |
| * gnu-v2-abi.c: Ditto. |
| * gnu-v3-abi.c: Ditto. |
| * go32-nat.c: Ditto. |
| * gdbarch.c: Regenerate. |
| * gdbarch.h: Regenerate. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * ax-gdb.c: Adjust some long output strings. |
| * breakpoint.c: Ditto. |
| * charset.c: Ditto. |
| * cp-abi.c: Ditto. |
| * infcall.c: Ditto. |
| * infrun.c: Ditto. |
| * linux-nat.c: Ditto. |
| * solib-pa64.c: Ditto. |
| * solib-som.c: Ditto. |
| |
| 2011-01-06 Tom Tromey <tromey@redhat.com> |
| |
| PR python/12367: |
| * NEWS: Add item. |
| * python/python.c (GdbMethods): Add "newest_frame" method. |
| * python/python-internal.h (gdbpy_newest_frame): Declare. |
| * python/py-frame.c (gdbpy_newest_frame): New function. |
| |
| 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| * jit.h (struct jit_code_entry): use ULONGEST for symfile_size. |
| * jit.c (jit_debug): New variable. |
| (show_jit_debug): New function. |
| (struct target_buffer): Use ULONGEST. |
| (bfd_open_from_target_memory): Likewise. |
| (jit_register_code, jit_inferior_init): Add debug output. |
| (_initialize_jit): Register "debug jit" command. |
| |
| 2011-01-06 Tom Tromey <tromey@redhat.com> |
| |
| * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment. |
| * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME |
| and ARCH_FRAME. |
| |
| 2011-01-06 Tom Tromey <tromey@redhat.com> |
| |
| * python/py-frame.c (frapy_block): Use get_frame_block. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| Do not stop on SIGPRIO signals by default |
| * infrun.c (_initialize_infrun): Unset signal_stop and |
| signal_print for TARGET_SIGNAL_PRIO. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-tasks.c: Fix style violation in comment. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * linespec.c (decode_compound, find_method): Remove trailing \n |
| at end of error string. |
| * solib-irix.c (irix_current_sos): Likewise. |
| * varobj.c (uninstall_variable): Likewise. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * copyright.py: New script. |
| * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc. |
| Launch emacs without exec'ing. Call copyright.py afterwards. |
| |
| 2011-01-05 Michael Snyder <msnyder@vmware.com> |
| |
| * addrmap.c: Shorten lines of >= 80 columns. |
| * arch-utils.c: Ditto. |
| * arch-utils.h: Ditto. |
| * ax-gdb.c: Ditto. |
| * ax-general.c: Ditto. |
| * bcache.c: Ditto. |
| * blockframe.c: Ditto. |
| * breakpoint.c: Ditto. |
| * buildsym.c: Ditto. |
| * c-lang.c: Ditto. |
| * c-typeprint.c: Ditto. |
| * charset.c: Ditto. |
| * coffread.c: Ditto. |
| * command.h: Ditto. |
| * corelow.c: Ditto. |
| * cp-abi.c: Ditto. |
| * cp-namespace.c: Ditto. |
| * cp-support.c: Ditto. |
| * dbug-rom.c: Ditto. |
| * dbxread.c: Ditto. |
| * defs.h: Ditto. |
| * dfp.c: Ditto. |
| * dfp.h: Ditto. |
| * dictionary.c: Ditto. |
| * disasm.c: Ditto. |
| * doublest.c: Ditto. |
| * dwarf2-frame.c: Ditto. |
| * dwarf2expr.c: Ditto. |
| * dwarf2loc.c: Ditto. |
| * dwarf2read.c: Ditto. |
| * elfread.c: Ditto. |
| * eval.c: Ditto. |
| * event-loop.c: Ditto. |
| * event-loop.h: Ditto. |
| * exceptions.h: Ditto. |
| * exec.c: Ditto. |
| * expprint.c: Ditto. |
| * expression.h: Ditto. |
| * f-lang.c: Ditto. |
| * f-valprint.c: Ditto. |
| * findcmd.c: Ditto. |
| * frame-base.c: Ditto. |
| * frame-unwind.c: Ditto. |
| * frame-unwind.h: Ditto. |
| * frame.c: Ditto. |
| * frame.h: Ditto. |
| * gcore.c: Ditto. |
| * gdb-stabs.h: Ditto. |
| * gdb_assert.h: Ditto. |
| * gdb_dirent.h: Ditto. |
| * gdb_obstack.h: Ditto. |
| * gdbcore.h: Ditto. |
| * gdbtypes.c: Ditto. |
| * gdbtypes.h: Ditto. |
| * inf-ttrace.c: Ditto. |
| * infcall.c: Ditto. |
| * infcmd.c: Ditto. |
| * inflow.c: Ditto. |
| * infrun.c: Ditto. |
| * inline-frame.h: Ditto. |
| * language.c: Ditto. |
| * language.h: Ditto. |
| * libunwind-frame.c: Ditto. |
| * libunwind-frame.h: Ditto. |
| * linespec.c: Ditto. |
| * linux-nat.c: Ditto. |
| * linux-nat.h: Ditto. |
| * linux-thread-db.c: Ditto. |
| * machoread.c: Ditto. |
| * macroexp.c: Ditto. |
| * macrotab.c: Ditto. |
| * main.c: Ditto. |
| * maint.c: Ditto. |
| * mdebugread.c: Ditto. |
| * memattr.c: Ditto. |
| * minsyms.c: Ditto. |
| * monitor.c: Ditto. |
| * monitor.h: Ditto. |
| * objfiles.c: Ditto. |
| * objfiles.h: Ditto. |
| * osabi.c: Ditto. |
| * p-typeprint.c: Ditto. |
| * p-valprint.c: Ditto. |
| * parse.c: Ditto. |
| * printcmd.c: Ditto. |
| * proc-events.c: Ditto. |
| * procfs.c: Ditto. |
| * progspace.c: Ditto. |
| * progspace.h: Ditto. |
| * psympriv.h: Ditto. |
| * psymtab.c: Ditto. |
| * record.c: Ditto. |
| * regcache.c: Ditto. |
| * regcache.h: Ditto. |
| * remote-fileio.c: Ditto. |
| * remote.c: Ditto. |
| * ser-mingw.c: Ditto. |
| * ser-tcp.c: Ditto. |
| * ser-unix.c: Ditto. |
| * serial.c: Ditto. |
| * serial.h: Ditto. |
| * solib-frv.c: Ditto. |
| * solib-irix.c: Ditto. |
| * solib-osf.c: Ditto. |
| * solib-pa64.c: Ditto. |
| * solib-som.c: Ditto. |
| * solib-sunos.c: Ditto. |
| * solib-svr4.c: Ditto. |
| * solib-target.c: Ditto. |
| * solib.c: Ditto. |
| * somread.c: Ditto. |
| * source.c: Ditto. |
| * stabsread.c: Ditto. |
| * stabsread.c: Ditto. |
| * stack.c: Ditto. |
| * stack.h: Ditto. |
| * symfile-mem.c: Ditto. |
| * symfile.c: Ditto. |
| * symfile.h: Ditto. |
| * symmisc.c: Ditto. |
| * symtab.c: Ditto. |
| * symtab.h: Ditto. |
| * target-descriptions.c: Ditto. |
| * target-memory.c: Ditto. |
| * target.c: Ditto. |
| * target.h: Ditto. |
| * terminal.h: Ditto. |
| * thread.c: Ditto. |
| * top.c: Ditto. |
| * tracepoint.c: Ditto. |
| * tracepoint.h: Ditto. |
| * ui-file.c: Ditto. |
| * ui-file.h: Ditto. |
| * ui-out.h: Ditto. |
| * user-regs.c: Ditto. |
| * user-regs.h: Ditto. |
| * utils.c: Ditto. |
| * valarith.c: Ditto. |
| * valops.c: Ditto. |
| * valprint.c: Ditto. |
| * valprint.h: Ditto. |
| * value.c: Ditto. |
| * varobj.c: Ditto. |
| * varobj.h: Ditto. |
| * vec.h: Ditto. |
| * xcoffread.c: Ditto. |
| * xcoffsolib.c: Ditto. |
| * xcoffsolib.h: Ditto. |
| * xml-syscall.c: Ditto. |
| * xml-tdesc.c: Ditto. |
| |
| 2011-01-05 Michael Snyder <msnyder@vmware.com> |
| |
| * cli/cli-cmds.c: Shorten lines of >= 80 columns. |
| * cli/cli-decode.c: Ditto. |
| * cli/cli-dump.c: Ditto. |
| * cli/cli-logging.c: Ditto. |
| * cli/cli-script.c: Ditto. |
| * cli/cli-setshow.c: Ditto. |
| * common/signals.c: Ditto. |
| * mi/mi-cmd-break.c: Ditto. |
| * mi/mi-cmd-disas.c: Ditto. |
| * mi/mi-cmd-stack.c: Ditto. |
| * mi/mi-cmd-var.c: Ditto. |
| * mi/mi-cmds.c: Ditto. |
| * mi/mi-common.h: Ditto. |
| * mi/mi-console.c: Ditto. |
| * mi/mi-interp.c: Ditto. |
| * mi/mi-main.c: Ditto. |
| * osf-share/cma_attr.c: Ditto. |
| * osf-share/cma_deb_core.h: Ditto. |
| * osf-share/cma_debug_client.h: Ditto. |
| * osf-share/cma_handle.h: Ditto. |
| * osf-share/cma_mutex.h: Ditto. |
| * osf-share/cma_stack_int.h: Ditto. |
| * osf-share/cma_tcb_defs.h: Ditto. |
| * python/py-auto-load.c: Ditto. |
| * python/py-breakpoint.c: Ditto. |
| * python/py-cmd.c: Ditto. |
| * python/py-frame.c: Ditto. |
| * python/py-objfile.c: Ditto. |
| * python/py-param.c: Ditto. |
| * python/py-progspace.c: Ditto. |
| * python/py-symbol.c: Ditto. |
| * python/py-value.c: Ditto. |
| * python/python-internal.h: Ditto. |
| * python/python.c: Ditto. |
| * tui/tui-data.c: Ditto. |
| * tui/tui-disasm.c: Ditto. |
| * tui/tui-hooks.c: Ditto. |
| * tui/tui-io.c: Ditto. |
| * tui/tui-layout.c: Ditto. |
| * tui/tui-regs.c: Ditto. |
| * tui/tui-source.c: Ditto. |
| * tui/tui-stack.c: Ditto. |
| * tui/tui-win.c: Ditto. |
| * tui/tui-windata.c: Ditto. |
| * tui/tui-winsource.c: Ditto. |
| |
| 2011-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac, gdb.1: Copyright year update. |
| |
| 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables |
| this_pc_in_block, morestack_msym and morestack_name. Check for |
| "__morestack" minimal symbol there. |
| |
| 2011-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * symfile.c (find_sym_fns): Add call to dont_repeat. |
| |
| 2011-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Copyright year update in most files (performed by copyright.sh). |
| |
| 2011-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year in version output. |
| |
| For older changes see ChangeLog-2010. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |