| 2008-04-01 Aleksandar Ristovski <aristovski@qnx.com> |
| |
| * valops.c (value_cast_structs): New function. Cast related |
| STRUCT types up/down and return cast value. The body of this |
| function comes mostly from value_cast_pointers. |
| (value_cast_pointers): Code for actual cast STRUCT-STRUCT moved |
| to value_cast_structs. Now value_cast_pointers needs only create |
| appropriate reference after using value_cast_structs for actual |
| casting. |
| (value_cast): Handle references. |
| |
| 2008-04-01 Marc Khouzam <marc.khouzam@ericsson.com> |
| |
| * MAINTAINERS: Added myself to section Write After Approval. |
| |
| 2008-03-30 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * ia64-tdep.c (examine_prologue): Correct array access. |
| |
| 2008-03-28 Aleksandar Ristovski <aristovski@qnx.com> |
| |
| * cp-support.c (first_component_command): Return if no arguments. |
| |
| 2008-03-28 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * ser-mingw.c (ser_windows_open): Open requested name. |
| |
| 2008-03-28 Aleksandar Ristovski <aristovski@qnx.com> |
| |
| * MAINTAINERS: Added myself. |
| |
| 2008-03-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.c (find_default_run_target): Allow a NULL `do_mesg' |
| parameter. If it is NULL, don't call error. |
| (find_default_can_async_p, find_default_is_async_p): Pass NULL as |
| `do_mesg' parameter to find_default_run_target. If no target was |
| found, return 0. |
| |
| 2008-03-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mips-linux-tdep.c: Update N32/N64 signal frame comments. |
| (N64_SIGCONTEXT_LO, N64_SIGCONTEXT_PC, N64_SIGCONTEXT_FPCSR): Update. |
| (N64_SIGCONTEXT_FIR, N64_SIGCONTEXT_CAUSE, N64_SIGCONTEXT_BADVADDR): |
| Delete. |
| (mips_linux_n32n64_sigframe_init): Do not record cause or badvaddr. |
| |
| 2008-03-27 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 6.8 released. |
| |
| 2008-03-27 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * features/Makefile (%.dat): Set xmltarget to the base filename |
| of the XML source, without subdirectory. |
| * regformats/rs6000/powerpc-32.dat: Regenerate. |
| * regformats/rs6000/powerpc-64.dat: Regenerate. |
| * regformats/rs6000/powerpc-e500.dat: Regenerate. |
| |
| 2008-03-27 Markus Deuling <deuling@de.ibm.com> |
| |
| * xcoffread.c (scan_xcoff_symtab): Replace current_gdbarch by |
| objfile arch. |
| |
| 2008-03-27 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/mi-main.c (enum captured_mi_execute_command_actions): |
| Spell suppress in EXECUTE_COMMAND_SUPPRESS_PROMPT correctly. |
| |
| 2008-03-26 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * objfiles.h (struct objfile): New GDBARCH member. |
| (get_objfile_arch): Add prototype. |
| * objfiles.c: Include "arch-utils.h". |
| (allocate_objfile): Look up gdbarch associated with bfd. |
| (get_objfile_arch): New function. |
| * Makefile (objfiles.o): Update dependencies. |
| |
| * dwarf2-frame.c (decode_frame_entry_1): Replace current_gdbarch |
| by objfile arch. |
| * dwarf2loc.c (dwarf_expr_read_reg): Replace current_gdbarch |
| by frame arch. |
| (locexpr_describe_location): Replace current_gdbarch by |
| objfile arch. |
| * dwarf2read.c (die_type): Replace current_gdbarch by objfile arch. |
| (dwarf2_add_field): Likewise. |
| (read_tag_pointer_type): Likewise. |
| (read_base_type): Likewise. |
| (new_symbol): Likewise. |
| |
| * coffread.c (decode_type): Add OBJFILE argument. Update callers. |
| (decode_base_type, decode_function_type): Likewise. |
| (coff_read_struct_type, coff_read_enum_type): Likewise. |
| (coff_symtab_read): Replace current_gdbarch by objfile arch. |
| (decode_base_type): Likewise. |
| (coff_read_enum_type): Likewise. |
| (coff_read_struct_type): Replace current_objfile by OBJFILE argument. |
| (coff_read_enum_type): Likewise. |
| |
| * dbxread.c (read_dbx_symtab): Replace current_gdbarch by objfile arch. |
| (end_psymtab): Likewise. |
| (process_one_symbol): Likewise. |
| |
| * mdebugread.c (parse_symbol): Replace current_gdbarch by objfile arch. |
| (parse_procedure): Likewise. |
| (parse_partial_symbols): Likewise. |
| |
| * somread.c (som_symtab_read): Replace current_gdbarch by objfile arch. |
| |
| * stabsread.c (define_symbol): Replace current_gdbarch by objfile arch. |
| Replace static pcc_promotion_type and pcc_unsigned_promotion_type by |
| built-in types. |
| (read_range_type): Replace current_gdbarch by objfile arch. Replace |
| static range_index_type by built-in type. |
| (read_one_struct_field): Replace current_gdbarch by objfile arch. |
| (read_enum_type): Likewise. |
| |
| * xcoffread.c (read_xcoff_symtab): Replace current_gdbarch by |
| objfile arch. |
| |
| 2008-03-26 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * varobj.h (varobj_floating_p): Declare. |
| * varobj.c (varobj_floating_p): New. |
| * mi/mi-cmd-var.c (mi_cmd_var_update): When passed |
| '@' as the name, update all floating varobjs. |
| |
| 2008-03-26 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * varobj.c (struct varobj_root): Rename use_selected_frame to |
| floating, and clarify the meaning. |
| (varobj_create, varobj_update, new_root_variable): Adjust. |
| (value_of_root): Don't use type_changed as in variable, |
| adjust comment. |
| (c_value_of_root): Adjust. |
| |
| 2008-03-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * linux-nat.c (linux_nat_attach): Add the pid we attached to, to |
| gdb's thread list. |
| (linux_nat_wait): Add main lwp to gdb's thread list. |
| * linux-thread-db.c (find_new_threads_callback): Also attach to |
| already listed threads which thread_db didn't know about yet. |
| |
| 2008-03-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * linux-nat.c (drain_queued_events): Fix comment typo. |
| (linux_nat_attach): In async mode, don't rely on storing a pending |
| status. Instead place the wait status on the pipe. |
| (linux_nat_resume): Remove unreacheable shortcut code in async |
| mode. |
| (stop_wait_callback): In async mode, don't store pending status. |
| Instead, cancel breakpoints or resend the signal appropriatelly. |
| (cancel_breakpoint): New, refactored from |
| cancel_breakpoints_callback. |
| (cancel_breakpoints_callback): Call cancel_breakpoint. |
| (pipe_to_local_event_queue): Remove special token processing. |
| (linux_nat_wait): Issue an internal error if a pending status is |
| found in async mode. |
| |
| 2008-03-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * inflow.c (gdb_has_a_terminal): Guard access to our_process_group. |
| |
| 2008-03-24 Nick Roberts <nickrob@snap.net.nz> |
| Vladimir Prus <vladimir@codesourcery.com> |
| |
| * varobj.c (struct varobj_root): New component thread_id. |
| (varobj_get_thread_id, check_scope): New functions. |
| (c_value_of_root): Use check_scope. Switch to the |
| proper thread if necessary. |
| |
| * varobj.h (varobj_get_thread_id): New extern. |
| |
| * mi/mi-cmd-var.c (print_varobj): Add thread-id field. |
| |
| 2008-03-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| PR gdb/544 |
| * top.c: Revert 2008-03-21 changes. |
| |
| 2008-03-23 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * thread.c (make_cleanup_restore_current_thread): Make it |
| globally visible. |
| * gdbthread.h (make_cleanup_restore_current_thread): Declare. |
| * varobj.c (varobj_update): Don't save/restore frame. |
| (c_value_of_root): Save/restore thread and frame here, |
| using make_cleanup_restore_current_thread. |
| * Makefile.in: Update dependecies. |
| |
| 2008-03-23 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * varobj.c (struct varobj_root): Clarify |
| comment on the frame field. |
| (varobj_create): Don't set frame if we have no |
| block. |
| |
| 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| PR gdb/544 |
| Suggested by Jan Kratochvil: |
| * top.c (gdb_rl_operate_and_get_next_completion): Call |
| rl_redisplay_function. |
| (gdb_rl_redisplay): New. |
| (init_main): Set rl_redisplay_function. |
| |
| 2008-03-21 Thomas Mittelstaedt <T.Mittelstaedt@cadenas.de> (tiny change) |
| |
| * aix-thread.c (pdc_read_regs): Fix compiler warning. |
| (pdc_write_regs, aix_thread_resume, fetch_regs_kernel_thread) |
| (store_regs_kernel_thread): Likewise. |
| |
| 2008-03-21 Pedro Alves <pedro@codesourcery.com> |
| |
| Linux native async support. |
| |
| * target.h (struct target_ops): Delete to_async_mask_value and add |
| to_async_mask. |
| (target_is_async_p, target_async): Formatting. |
| (target_async_mask_value): Delete. |
| (target_async_mask): Delete function declaration, and add new |
| target macro with the same name. |
| |
| * target.c (update_current_target): Replace to_async_mask_value by |
| to_async_mask. Default to_async_mask to return_one. |
| (target_async_mask): Delete. |
| (find_default_can_async_p, find_default_is_async_p): New. |
| (init_dummy_target): register find_default_can_async_p and |
| find_default_is_async_p on the dummy target. |
| |
| * linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h. |
| (debug_linux_nat_async): New global. |
| (show_debug_linux_nat_async): New function. |
| (linux_nat_async_enabled, linux_nat_async_mask_value) |
| (linux_nat_event_pipe, linux_nat_num_queued_events) |
| (linux_nat_async_events_enabled): New globals. |
| (struct waitpid_result): New struct. |
| (waitpid_queue): New global. |
| (queued_waitpid, push_waitpid, drain_queued_events): New. |
| (my_waitpid): Call queued_waitpid. |
| (linux_child_follow_fork): Disable async events during the call. |
| (blocked_mask): Delete. |
| (sync_sigchld_action, async_sigchld_action): New globals. |
| (lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD. In |
| async mode, block events during the call. |
| (linux_nat_create_inferior): New. |
| (linux_nat_attach): In sync mode, restore the mask states. In |
| async mode, wake the event loop immediatelly. |
| (detach_callback): Drain all queued events of the lwp we're |
| detaching from. |
| (linux_nat_detach): Block async mode, and drain events of the main |
| process. |
| (linux_nat_resume): If in async mode, mask async events during the |
| call. If short circuiting, force event loop to wake up. If |
| resuming, set target_executing, and register target events in the |
| event loop. |
| (pipe_to_local_event_queue, local_event_queue_to_pipe): New. |
| (linux_nat_wait): In async mode, block events during the call. |
| Only enable/disable passing SIGINT to the inferior in sync mode. |
| Get events from local waitpid queue. If no interesting events was |
| found, return to events loop. Reregister target events in the |
| event loop on exit. In sync mode, no need to reblock SIGCHLD. |
| (linux_nat_kill): Disable events on entry. |
| (linux_nat_mourn_inferior): In sync mode, don't restore the masks |
| here. Detach async mode from the event loop if there are no more |
| forks available, otherwise leave it on. |
| (sigchld_handler): Assure this is called only in sync mode. |
| (linux_async_permitted, linux_async_permitted_1): New globals. |
| (set_maintenance_linux_async_permitted) |
| (show_maintenance_linux_async_permitted): New functions. |
| (linux_nat_is_async_p, linux_nat_can_async_p) |
| (linux_nat_async_mask): New. |
| (linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New. |
| (get_pending_events, async_sigchld_handler): New. |
| (linux_nat_async_events): New. |
| (async_terminal_is_ours): New global. |
| (linux_nat_terminal_inferior, linux_nat_terminal_ours): New. |
| (async_client_callback, async_client_context): New. |
| (linux_nat_async_file_handler, linux_nat_async) |
| (linux_nat_disable_async, linux_nat_enable_async): New. |
| (linux_nat_add_target): Register linux_nat_create_inferior, |
| linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async, |
| linux_nat_async_mask, linux_nat_terminal_inferior and |
| linux_nat_terminal_ours. |
| (_initialize_linux_nat): Remove local action variable, and update |
| code that used it to use sync_sigchld_action. Add new |
| "lin-lwp-async" debug set/show command. Put the "lin-lwp" debug |
| set/show command in the maintenance class. Add new "linux-async" |
| maintenance set/show command. Block SIGCHLD by default. Setup |
| async_sichld_action, and sync_sigchld_action. Install the default |
| async mode. |
| (lin_thread_get_thread_signals): Use a local sigset_t for blocking |
| the cancel signals. |
| |
| * linux-thread-db.c (re_check_for_thread_db): New. |
| (clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE. |
| (thread_db_can_async_p, thread_db_is_async_p, thread_db_async) |
| (thread_db_async_mask): New. |
| (init_thread_db_ops): Register thread_db_can_async_p, |
| thread_db_is_async_p, thread_db_async and thread_db_async_mask. |
| |
| * remote.c (remote_async_mask_value): New. |
| (remote_return_zero): New. |
| (init_remote_ops): Register remote_return_zero as callbacks of |
| to_can_async_p and to_is_async_p. |
| (remote_can_async_p, remote_is_async_p, remote_async): Update to |
| use remote_async_mask_value. |
| (remote_async_mask): New. |
| (init_remote_async_ops): Remove to_async_mask_value setting and |
| register remote_async_mask as to_async_mask callback in |
| remote_async_ops. |
| |
| * Makefile.in (linux-nat.o): Update. |
| |
| 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdbthread.h (add_thread_with_info): New. |
| * linux-thread-db.c: Add some documentation. |
| (GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete. |
| (struct private_thread_info): Remove th_valid and ti_valid. |
| Replace ti with tid. |
| (thread_get_info_callback): Do not add TID to the new ptid. Do |
| not cache th or ti. |
| (thread_db_map_id2thr, lwp_from_thread): Delete functions. |
| (thread_from_lwp): Assert that the LWP is set. Do not add TID to the |
| new PTID. |
| (attach_thread): Handle an already-existing thread. Use |
| add_thread_with_info. Cache the th and tid. |
| (detach_thread): Verify that private was set. Remove verbose |
| argument and printing. Update caller. |
| (thread_db_detach): Do not adjust inferior_ptid. |
| (clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete. |
| (check_event, find_new_threads_callback): Do not add TID to the new PTID. |
| (thread_db_wait): Do not use lwp_from_thread. |
| (thread_db_pid_to_str): Use the cached TID. |
| (thread_db_extra_thread_info): Check that private is set. |
| (same_ptid_callback): Delete. |
| (thread_db_get_thread_local_address): Do not use it or check |
| is_thread. Check that private is set. Assume that the thread |
| handle is already cached. |
| (init_thread_db_ops): Remove to_resume and to_kill. |
| * thread.c (add_thread_with_info): New. |
| (add_thread): Use it. |
| * linux-nat.c (find_thread_from_lwp): Delete. |
| (exit_lwp): Do not use it. Check print_thread_events. Print before |
| deleting the thread. |
| (GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to... |
| * linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here. |
| * inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and |
| printf_unfiltered for thread exits. |
| * procfs.c (procfs_wait): Likewise. |
| |
| 2008-03-21 Chris Demetriou <cgd@google.com> |
| |
| * symtab.c (rbreak_command): Quote symbol name before passing |
| it to break_command. |
| |
| 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * eval.c (evaluate_subexp_for_address): Clarify error message. |
| Use value_must_coerce_to_target. |
| * infcall.c (value_arg_coerce): Call value_coerce_to_target. |
| * valops.c (value_assign): Call value_coerce_to_target when |
| assigning to anything but internalvars. Leave GDB-side arrays |
| as arrays when assigning to internalvars. |
| (value_must_coerce_to_target, value_coerce_to_target): New. |
| (value_coerce_array, value_addr): Call value_coerce_to_target. |
| (value_array): Create the array in GDB's memory instead of |
| the inferior's. |
| * value.h (value_must_coerce_to_target, value_coerce_to_target): |
| Declare. |
| |
| 2008-03-21 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * top.c (quit_confirm): Warn that we will kill the program. |
| |
| 2008-03-19 Pedro Alves <pedro@codesourcery.com> |
| |
| * inflow.c (terminal_ours_1): Guard access to |
| inferior_process_group with #ifdef PROCESS_GROUP_TYPE. |
| |
| 2008-03-18 Ulrich Weigand <uweigand@de.ibm.com> |
| Jim Blandy <jimb@codesourcery.com> |
| Daniel Jacobowitz <drow@false.org> |
| |
| * dwarf2expr.h (struct dwarf_expr_context): Add ADDR_SIZE member. |
| (dwarf2_read_address): Update prototype. |
| |
| * dwarf2expr.c (unsigned_address_type): Add ADDR_SIZE parameter. |
| (signed_address_type): Likewise. |
| (dwarf2_read_address): Replace BYTES_READ parameter with ADDR_SIZE. |
| (execute_stack_op): Update calls to unsigned_address_type, |
| signed_address_type and dwarf2_read_address. Fix implementation |
| of DW_OP_deref_size. |
| |
| * dwarf2loc.h (dwarf2_per_cu_objfile): Add prototype. |
| (dwarf2_per_cu_addr_size): Likewise. |
| (struct dwarf2_locexpr_baton): Replace OBJFILE with PER_CU. |
| (struct dwarf2_loclist_baton): Likewise. |
| |
| * dwarf2loc.c (find_location_expression): Update calls to |
| dwarf2_read_address. Use dwarf2_per_cu_objfile and |
| dwarf2_per_cu_addr_size to retrieve PER_CU parameters. |
| (locexpr_describe_location): Likewise. |
| (dwarf2_evaluate_loc_desc): Replace OBJFILE with PER_CU parameter. |
| Set ctx->addr_size to dwarf2_per_cu_addr_size (per_cu). |
| (dwarf2_loc_desc_needs_frame): Add PER_CU parameter. Set ctx->addr_size |
| to dwarf2_per_cu_addr_size (per_cu). |
| (locexpr_read_variable): Update dwarf2_evaluate_loc_desc call. |
| (loclist_read_variable): Likewise. |
| (locexpr_read_needs_frame): Update dwarf2_loc_desc_needs_frame call. |
| |
| * dwarf2read.c (dwarf2_symbol_mark_computed): Set baton->per_cu |
| instead of baton->objfile. |
| (dwarf2_per_cu_obfile): New function. |
| (dwarf2_per_cu_addr_size): Likewise. |
| |
| * dwarf2-frame.c (struct comp_unit): Move higher. |
| (struct dwarf2_cie): Add UNIT and ADDR_SIZE members. |
| (execute_stack_op): Add ADDR_SIZE parameter; set ctx->addr_size. |
| (execute_cfa_program): Add FDE parameter. Replace EH_FRAME_P |
| parameter by using fde->eh_frame_p. Use read_encoded_value |
| to implement DW_CFA_set_loc. |
| (struct dwarf2_frame_cache): Add ADDR_SIZE member. |
| (dwarf2_frame_cache): Set cache->addr_size. Update calls to |
| execute_stack_op and execute_cfa_program. |
| (dwarf2_frame_prev_register): Update calls to execute_stack_op. |
| (size_of_encoded_value): Remove. |
| (read_encoded_value): Add PTR_LEN and FUNC_BASE parameters. |
| Remove call to size_of_encoded_value. Implement DW_EH_PE_funcrel. |
| (add_cie): Set cie->unit backlink. |
| (decode_frame_entry_1): Set cie->addr_size. Update calls to |
| read_encoded_value. |
| (dwarf2_build_frame_info): Allocate UNIT on objfile obstack. |
| |
| 2008-03-17 Markus Deuling <deuling@de.ibm.com> |
| |
| * i386-tdep.c (i386_print_insn): Remove unnecessary call to |
| gdbarch_bfd_arch_info. |
| |
| 2008-03-17 Joel Brobecker <brobecker@adacore.com> |
| |
| * aix-thread.c (pdc_read_regs): Minor reformatting. |
| |
| 2008-03-17 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * thread.c (print_thread_info): Don't insist |
| on having current thread if there are no |
| threads at all. |
| |
| 2008-03-17 Pedro Alves <pedro@codesourcery.com> |
| |
| * infcmd.c (attach_command_post_wait) |
| (attach_command_continuation): New. |
| (attach_command): Support background async execution, and async |
| execution in synchronous mode. |
| |
| 2008-03-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * stack.c (print_stack_frame, print_frame): Use RETURN_MASK_ERROR. |
| * symmisc.c (dump_symtab_1): Likewise. |
| * wrapper.c (gdb_value_struct_elt): Likewise. |
| |
| 2008-03-17 Pedro Alves <pedro@codesourcery.com> |
| |
| * linux-nat.c (linux_nat_filter_event): Fix comment typo. |
| |
| 2008-03-17 Pedro Alves <pedro@codesourcery.com> |
| |
| * linux-nat.c (linux_nat_filter_event): New, refactored from |
| linux_nat_wait. |
| (linux_nat_wait): Call linux_nat_filter_event. |
| |
| 2008-03-17 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * top.c (execute_command): Fix uninitialized variable error. |
| |
| 2008-03-16 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| * Makefile.in (amd64nbsd-nat.o): New dependency. |
| * amd64nbsd-nat.c: Include "nbsd-nat.h". |
| (_initialize_amd64nbsd_nat): Update target vector to use |
| nbsd_pid_to_exec_file. |
| * config/i386/nbsd64.mh (NATDEPFILES): Add nbsd-nat.o. |
| |
| 2008-03-15 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Remove ignoring leading exec events code. |
| * fork-child.c (startup_inferior): Do not set |
| inferior_ignoring_leading_exec_events. |
| * inf-child.c (inf_child_reported_exec_events_per_exec_call): Remove. |
| (inf_child_target): Do not set to_reported_exec_events_per_exec_call. |
| * infrun.c (inferior_ignoring_leading_exec_events): Remove. |
| (handle_inferior_event): Remove code for ignoring leading exec |
| events. |
| * target.c (update_current_target): Do not inherit, or default, |
| to_reported_exec_events_per_exec_call. |
| (debug_to_reported_exec_events_per_exec_call): Remove. |
| (setup_target_debug): Do not set to_reported_exec_events_per_exec_call. |
| * target.h (target_reported_exec_events_per_exec_call): Remove. |
| (struct target): Remove the to_reported_exec_events_per_exec_call |
| field. |
| |
| 2008-03-15 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement -thread-info. |
| * gdbthread.h (print_thread_info): Declare. |
| |
| * thread.c (print_thread_info): New, extracted |
| from info_threads_command and adjusted to |
| work for CLI and MI. |
| (info_threads_command): Use print_thread_info. |
| * Makefile.in: Update dependencies. |
| |
| * mi/mi-cmds.c (mi_cmds): Specify a handler |
| for -thread-info. |
| * mi/mi-cmds.h (mi_cmd_thread_info): Declare. |
| * mi/mi-main.c (mi_cmd_thread_info): New. |
| (mi_cmd_list_features): Include 'thread-info'. |
| |
| 2008-03-14 Kevin Buettner <kevinb@redhat.com> |
| |
| * mips-tdep.c (mips32_scan_prologue): Use the ABI register size |
| to decide whether to match instruction patterns using "sw" and "sd". |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * infcmd.c (jump_command): Postpone disabling stdin until after |
| the possible query. |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * inflow.c (gdb_getpgrp): New. |
| (gdb_has_a_terminal): Use get_getpgrp. |
| (terminal_ours_1): If attach_flag is set, don't refetch |
| inferior_process_group. |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * features/library-list.dtd: Allow "section" elements as children |
| of "library". Add "section" element and describe its attributes. |
| |
| * solib-target.c (struct lm_info): Add section_bases member. |
| (library_list_start_segment): Error out if seen a section element. |
| (library_list_start_section): New. |
| (library_list_end_library): New. |
| (solib_target_free_library_list): Free section_bases. |
| (section_attributes): New. |
| (library_children): Make "segment" optional. Add "section" child. |
| (library_list_children): Register library_list_end_library. |
| (solib_target_relocate_section_addresses): Handle section bases. |
| |
| * NEWS: Mention new qXfer:libraries:read section offsets support. |
| |
| 2008-03-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * defs.h (do_exec_error_cleanups, discard_exec_error_cleanups) |
| (make_exec_error_cleanup): Remove declarations. |
| * utils.c (exec_error_cleanup_chain): Remove. |
| (do_exec_error_cleanups, discard_exec_error_cleanups) |
| (make_exec_error_cleanup): Remove. |
| * event-loop.c (start_event_loop): Adjust call to |
| async_enable_stdin. |
| * event-top.c (async_enable_stdin): Remove the paramater dummy. |
| (async_disable_stdin): Don't register async_enable_stdin via |
| cleanup. |
| * inf-loop.c (inferior_event_handler): Don't |
| call do_exec_error_cleanups. Call async_enable_stdin instead. |
| * event-loop.c (start_event_loop): Adjust call to |
| async_enable_stdin. |
| * tui/tui-interp.c (tui_command_loop): Adjust call to |
| async_enable_stdin. |
| |
| 2008-03-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Async mode fixes. |
| * Makefile.in (infcmd.o, inf-loop.o): Update dependencies. |
| * breakpoint.c (bpstat_do_actions): In async mode, |
| don't jump to top expecting stop_bpstat to be already |
| updated. |
| * event-loop.c (start_event_loop): Call async_enable_stdin |
| on exception. |
| * event-top.c (async_enable_stdin): Do nothing if sync_execution |
| is not set. |
| (command_handler): Do not setup continuation here. |
| (command_line_handler_continuation): Move to... |
| * top.c (command_line_handler_continuation): ... here. |
| (execute_command): In async mode, register continuation. |
| Don't check frame's language in running in async mode. |
| * exceptions.c (throw_exception): Don't do exec_error_cleanups. |
| * inf-loop.c (complete_execution): Inline into... |
| (inferior_event_handler): ... here. Clear target_executing before |
| doing any cleanups. Don't try to show prompt if the target was |
| resumed. |
| * infcmd.c (signal_command): Add support for async mode. |
| (finish_command): Only add continuation if the target was |
| successfully resumed. |
| * remote.c (init_async_opts): Register to_get_thread_local_address |
| handler. |
| * mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess |
| with sync_execution. |
| * tui/tui-interp.c (tui_command_loop): Call async_enable_stdin |
| on exception. |
| |
| 2008-03-14 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * corefile.c (reopen_exec_file): Use exec_bfd_mtime. |
| * exec.c (exec_bfd_mtime): Define. |
| (exec_close): Clear it. |
| (exec_file_attach): Set it. |
| * gdbcore.h (exec_bfd_mtime): Declare. |
| * source.c (find_source_lines): Do not use bfd_get_mtime. |
| |
| 2008-03-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * top.c (simplified_command_loop): Remove. |
| |
| 2008-03-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Remove unused remote.c hooks. |
| * remote.c (deprecated_target_resume_hook) |
| (deprecated_target_wait_loop_hook): Remove. |
| (remote_resume): Do not call deprecated_target_resume_hook. |
| (remote_wait): Do not call deprecated_target_wait_loop_hook. |
| (remote_async_wait): Likewise. |
| |
| 2008-03-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement MI notification for new threads. |
| * doc/observer.texi (new_thread): Document. |
| * observer.sh: Forward declare struct thread_info. |
| * thread.c (add_thread): Notify observer. |
| |
| * interps.h (interp_init_ftype): New parameter |
| top_level. |
| (interp_set): Likewise. |
| (top_level_interpreter_data): Declare. |
| * interps.c (interp_set): New parameter top_level. |
| Pass it to interpreter's init function. Remember |
| top level interpreter. |
| (interpreter_exec_cmd): Adjust. |
| (top_level_interpreter_data): New. |
| * main.c (captured_main): Pass 1 for top_level |
| parameter of interp_set. |
| * cli/cli-interp.c (cli_interpreter_init): New |
| parameter top_level. |
| * tui/tui-interp.c (tui_init): New parameter top_level. |
| |
| * mi/mi-interp.c (mi_new_thread): New. |
| (mi_interpreter_init): If top level, register |
| observer for new threads. |
| |
| * Makefile.in (mi-interp.o, thread.o): Update dependencies. |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * top.c (execute_command): Disable break and stop |
| commands in async mode. |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| revert: |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| * inf-loop.c (inferior_event_handler): Don't include remote.h. |
| Call target_stop in the INF_QUIT_REQ case. |
| * Makefile.in (inf-loop.o): Update. |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * inf-loop.c (inferior_event_handler): Don't include remote.h. |
| Call target_stop in the INF_QUIT_REQ case. |
| * Makefile.in (inf-loop.o): Update. |
| |
| 2008-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * top.c (execute_command): Enable break, info and interrupt |
| commands in async mode. |
| |
| 2008-03-13 Vladimir Prus <vladimir@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * breakpoint.h (breakpoint_restore_shadows): New |
| declaration. |
| * breakpoint.c (breakpoint_restore_shadows): New. |
| (read_memory_nobpt): Delete. |
| * gdbcore.h (read_memory_nobpt): Delete declaration. |
| * target.c (memory_xfer_partial): Call |
| breakpoint_restore_shadows. |
| (restore_show_memory_breakpoints) |
| (make_show_memory_beakpoints_cleanup): New. |
| (show_memory_breakpoints): New. |
| * target.h (make_show_memory_beakpoints_cleanup): Declare. |
| * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): |
| Make sure we see memory breakpoints when checking if |
| breakpoint is still there. |
| * alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c, |
| hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c, |
| m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c, |
| sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt. |
| |
| 2008-03-12 Pedro Alves <pedro@codesourcery.com> |
| |
| * thread.c (add_thread): Use printf_unfiltered to print. |
| |
| 2008-03-12 Joel Brobecker <brobecker@gnat.com> |
| |
| * sol-thread.c: Replace use of TM_I386SOL2_H by an expression |
| that is true only on x86-solaris and x86_64-solaris. |
| * procfs.c: Likewise. Move procfs_find_LDT_entry up together |
| with proc_get_LDT_entry. |
| |
| 2008-03-12 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * configure.ac (AC_CHECK_FUNCS): Add check for setsid. |
| * config.in, configure: Regenerate. |
| * fork-child.c (fork_inferior): Call create_tty_session. |
| * inflow.c (new_tty): Set controlling terminal with TIOCSCTTY. |
| (create_tty_session): New function. |
| * terminal.h: Declare create_tty_session. |
| |
| 2008-03-12 Alan Modra <amodra@bigpond.net.au> |
| |
| PR 5900 |
| * elfread.c (elf_symtab_read): Make shndx an unsigned int. |
| * mipsread.c: Include elf/internal.h. |
| (read_alphacoff_dynamic_symtab): Map external reserved sym_shndx |
| to internal range. |
| |
| 2008-03-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_arch |
| to get at the current architecture and at the target specific vector. |
| Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and |
| remove define of I387_ST0_REGNUM. |
| |
| * amd64-tdep.c (I387_ST0_REGNUM): Remove define. |
| |
| (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to |
| get at the current architecture |
| (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as |
| parameter. |
| |
| * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM, |
| I387_NUM_XMM_REGS and I387_MM0_REGNUM. |
| |
| (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM, |
| I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM, |
| (I387_FSTAT_REGNUM): Add target specific vector as parameter. |
| |
| (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get |
| at the target specific vector. |
| |
| (i386_get_longjmp_target): Use get_frame_arch to get at the current |
| architecture. Use gdbarch_tdep to get at the target specific vector. |
| |
| (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and |
| update caller. Use gdbarch_tdep to get at the target specific vector. |
| |
| (i386_register_to_value: Use get_frame_arch to get at the current |
| architecture. |
| |
| * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as |
| parameter. |
| |
| * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM, |
| I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM |
| I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR, |
| FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter. |
| |
| (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and |
| undef's. |
| |
| (i387_convert_register_p, i387_register_to_value, |
| i387_value_to_register): Update call for i386_fp_regnum_p. |
| |
| * i387-tdep.h: Remove comment. |
| (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define. |
| (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM, |
| I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM, |
| I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM, |
| I387_MXCSR_REGNUM): Add target specific vector as parameter. |
| |
| 2008-03-10 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (fork-child.o): Update. |
| * NEWS: Document "set exec-wrapper" and the gdbserver --wrapper |
| argument. Gather all gdbserver features together. |
| * fork-child.c (exec_wrapper): New variable. |
| (fork_inferior): Use it. |
| (startup_inferior): Skip an extra trap if using "set exec-wrapper". |
| (unset_exec_wrapper_command, _initialize_fork_child): New. |
| |
| 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp> |
| |
| * source.c (directory_command): Modify the determination of |
| condition of terminal "from_tty". |
| |
| 2008-03-10 Matt Rice <ratmice@gmail.com> |
| |
| * dwarf2read.c (set_cu_language): Add DW_LANG_ObjC. |
| |
| 2008-03-10 Hidetaka Takano <hidetaka.takano@glb.toshiba.co.jp> |
| |
| * spu-tdep.c (info_spu_event_command): Insert a '\0' to the end |
| of the data passing to strtoulst function. |
| (info_spu_signal_command): Likewise. |
| |
| 2008-03-08 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * mi/mi-interp.c (mi_command_loop): Remove |
| commented-out code. |
| |
| 2008-03-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * remote.c (extended_remote_attach_1): Make local variable pid an int |
| instead of a pid_t. |
| |
| 2008-03-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * solib-svr4.c (svr4_same_1): New function, originally extracted |
| from svr4_same and expanded to handle the sparc64 case. |
| (svr4_same): Move up and reimplement using svr4_same_1. |
| (enable_break): Use svr4_same_1 to do shared library name comparisons. |
| |
| 2008-03-07 Ramana Radhakrishnan <ramana.r@gmail.com> |
| |
| * MAINTAINERS: Move self to Paper trail. |
| |
| 2008-03-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (mingw-hdep.o, posix-hdep.o, remote-fileio.o): Update. |
| * event-loop.c (call_async_signal_handler): New. |
| * event-loop.h (call_async_signal_handler) |
| (gdb_call_async_signal_handler): Declare. |
| (mark_async_signal_handler): Add comments. |
| * event-top.c (handle_sigint): Use gdb_call_async_signal_handler. |
| * mingw-hdep.c (sigint_event, sigint_handler): New. |
| (gdb_select): Use them. Wait for the readline signal handler |
| to finish. |
| (gdb_call_async_signal_handler, _initialize_mingw_hdep): New functions. |
| * posix-hdep.c (gdb_call_async_signal_handler): New function. |
| * remote-fileio.c (sigint_fileio_token, async_remote_fileio_interrupt): |
| New. |
| (remote_fileio_ctrl_c_signal_handler): Use |
| gdb_call_async_signal_handler. |
| (initialize_remote_fileio): Initialize sigint_fileio_token. |
| * remote.c (initialize_sigint_signal_handler, handle_remote_sigint): Do |
| not initialize tokens here. |
| (handle_remote_sigint_twice): Likewise. Reinstall |
| handle_remote_sigint. |
| (async_remote_interrupt_twice): Just call interrupt_query. |
| (cleanup_sigint_signal_handler): Do not delete tokens. |
| (remote_interrupt, remote_interrupt_twice): Use |
| gdb_call_async_signal_handler. |
| (interrupt_query): Reinstall the default signal handler. |
| (_initialize_remote): Initialize tokens here. |
| |
| 2008-03-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * features/rs6000/power-core.xml, features/rs6000/power64-core.xml, |
| features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml: |
| Change the type of the lr register to code_ptr. |
| * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c, |
| features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c, |
| features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c, |
| features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c, |
| features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c, |
| features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c, |
| features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: Regenerate. |
| |
| 2008-03-03 James E. Wilson <wilson@tuliptree.org> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2008-03-03 Keith Seitz <keiths@redhat.com> |
| |
| From Dave Murphy <davem@devkitpro.org>: |
| * configure.ac: Set tcl configdir to win under mingw. |
| * configure: Regenerate. |
| |
| 2008-03-03 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * breakpoint.c (fetch_watchpoint_value): New function. |
| (update_watchpoint): Set and clear val_valid. Use |
| fetch_watchpoint_value. Handle unreadable values on the |
| value chain. Correct check for user-requested array watchpoints. |
| (breakpoint_init_inferior): Clear val_valid. |
| (watchpoint_value_print): New function. |
| (print_it_typical): Use it. Do not free or clear old_val. Print |
| watchpoints even if old_val == NULL. |
| (watchpoint_check): Use fetch_watchpoint_value. Check for values |
| becoming readable or unreadable. |
| (watch_command_1): Use fetch_watchpoint_value. Set val_valid. |
| (do_enable_watchpoint): Likewise. |
| * breakpoint.h (struct breakpoint): Update comment for val. Add |
| val_valid. |
| * NEWS: Mention watchpoints on inaccessible memory. |
| |
| 2007-02-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (i386-nat.o): Update. |
| * amd64-linux-nat.c (_initialize_amd64_linux_nat): Call |
| i386_use_watchpoints. |
| * i386-linux-nat.c (_initialize_i386_linux_nat): Call |
| i386_use_watchpoints. |
| * i386-nat.c (i386_stopped_data_address): Take two arguments. |
| (i386_stopped_by_watchpoint): Update call. |
| (i386_can_use_hw_breakpoint, i386_use_watchpoints): New. |
| * config/i386/nm-i386.h: Conditionalize definitions on |
| ! I386_WATCHPOINTS_IN_TARGET_VECTOR. |
| (i386_use_watchpoints): Declare. |
| (i386_stopped_data_address): Update. |
| * config/i386/nm-linux.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define. |
| * config/i386/nm-linux64.h (I386_WATCHPOINTS_IN_TARGET_VECTOR): Define. |
| |
| 2008-02-29 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 6.8 branch created (branch timestamp: 2008-02-26 10:00 UTC) |
| * version.in: Bump version to 6.8.50.20080229-cvs. |
| |
| 2008-02-28 Markus Deuling <deuling@de.ibm.com> |
| |
| * f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING |
| properly. |
| |
| 2008-02-28 Tom Tromey <tromey@redhat.com> |
| |
| * infcmd.c (notice_args_read): Print result of get_inferior_args. |
| |
| 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * infcmd.c (kill_if_already_running): Make static. Use |
| target_require_runnable. |
| * target.c (target_require_runnable): New. |
| * target.h (target_require_runnable): Declare. |
| |
| 2008-02-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * frame.c (reinit_frame_cache): Only annotate if frames were |
| previously valid. |
| |
| 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * regformats/reg-ppc.dat: Rename "ps" to "msr". |
| * regformats/reg-ppc64.dat: Likewise. |
| |
| 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * features/Makefile (%.dat): Emit xmltarget statement. |
| |
| * regformats/regdat.sh: Support xmltarget and xmlarch statments. |
| Generate code to set gdbserver_xmltarget in init_registers_${name}. |
| |
| * regformats/arm-with-iwmmxt.dat: Regenerate. |
| * regformats/mips64-linux.dat: Regenerate. |
| * regformats/mips-linux.dat: Regenerate. |
| * regformats/rs6000/powerpc-32.dat: Regenerate. |
| * regformats/rs6000/powerpc-64.dat: Regenerate. |
| * regformats/rs6000/powerpc-e500.dat: Regenerate. |
| |
| * regformats/reg-arm.dat: Add xmlarch statement. |
| * regformats/reg-i386.dat: Likewise. |
| * regformats/reg-i386-linux.dat: Likewise. |
| * regformats/reg-x86-64-linux.dat: Likewise. |
| * regformats/reg-spu.dat: Likewise. |
| |
| 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (remote_wait, remote_async_wait): Stop if we receive |
| an error. |
| |
| 2008-02-27 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * utils.c (debug_timestamp): New. |
| (vfprintf_unfiltered): Print timestamps if requested. |
| (show_debug_timestamp): New. |
| (initialize_utils): Register "set debug timestamp". |
| * NEWS: Mention "set debug timestamp". Add GDB 6.8 section. |
| |
| 2008-02-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * breakpoint.c (skip_prologue_sal): New function. |
| (resolve_sal_pc): Adjust SAL past prologue if the SAL was |
| computed from a line number. |
| |
| 2008-02-27 Joel Brobecker <brobecker@adacore.com> |
| |
| * features/rs6000/power-core.xml, features/rs6000/power64-core.xml |
| features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml: |
| Set PC register type to "code_ptr". |
| * features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c, |
| features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c, |
| features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c, |
| features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c, |
| features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c, |
| features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c, |
| features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: |
| Regenerate. |
| |
| 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * regformats/regdat.sh: Rename init_registers function in |
| generated file to init_registers_${name}. |
| |
| * regformats/reg-crisv32.dat: Set "name" to crisv32. |
| * regformats/reg-ppc64.dat: Set "name" to ppc64. |
| * regformats/reg-s390x.dat: Set "name" to s390x. |
| |
| 2008-02-26 Greg Law <glaw@undo-software.com> |
| |
| * regcache.c (registers_changed): Call reinit_frame_cache. |
| |
| 2008-02-26 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o. |
| * sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver |
| and svr4_fetch_objfile_link_map. |
| * Makefile.in (sh-linux-tdep.o): Update. |
| |
| 2008-02-26 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * amd64-tdep.c (amd64_classify): Add support for decimal float |
| types. |
| * i386-tdep.c (i386_return_value): Make 128-bit decimal float |
| use the struct return convention. |
| |
| 2008-02-26 Nick Roberts <nickrob@snap.net.nz> |
| |
| * breakpoint.c (print_one_breakpoint_location): Revert Enb field |
| to old format. Discard breakpoint address if shared library is |
| unloaded. |
| (breakpoint_1): Adjust formatting of table header accordingly. |
| |
| 2008-02-25 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * remote.c (remote_get_threadlist): If the response |
| is empty, don't try to parse it. |
| |
| 2008-02-23 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Unbreak 'target async'. |
| * serial.c (serial_async): Set the |
| handler function before enabling async |
| mode. |
| |
| 2008-02-22 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * solib-svr4.c (enable_break): Convert r_brk to a code address. |
| |
| 2008-02-21 Pedro Alves <pedro@codesourcery.com> |
| |
| * remote.c (extended_remote_attach_1): Set attach_flag. |
| (extended_remote_create_inferior_1): Clear attach_flag. |
| |
| 2008-02-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set |
| r_brk_offset. |
| (mipsnbsd_lp64_fetch_link_map_offsets): Likewise. |
| * solib-svr4.c (solib_svr4_r_brk): New. |
| (open_symbol_file_object, svr4_current_sos): Always check the |
| debug base. |
| (svr4_fetch_objfile_link_map): Do not set debug_base. |
| (enable_break): Use r_brk if it is set. |
| (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset. |
| (svr4_lp64_fetch_link_map_offsets): Likewise. |
| * solib-svr4.h (struct link_map_offsets): Add r_brk_offset. |
| |
| 2008-02-20 Markus Deuling <deuling@de.ibm.com> |
| Mark Kettenis <kettenis@gnu.org> |
| |
| * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by |
| trad_frame_saved_reg. |
| (trad-frame.h): New include. |
| |
| (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs |
| instead of frame_obstack_zalloc. |
| (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register. |
| |
| * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h. |
| |
| 2008-02-20 Markus Deuling <deuling@de.ibm.com> |
| |
| * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess |
| from disassemble_info instead of gdbarch_byte_order. |
| |
| * mips-tdep.c (gdb_print_insn_mips): Likewise. |
| * arm-tdep.c (gdb_print_insn_arm): Likewise. |
| |
| 2008-02-20 Markus Deuling <deuling@de.ibm.com> |
| |
| * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add |
| gdbarch as parameter. |
| |
| * gdbarch.{c,h}: Regenerate. |
| |
| * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as |
| parameter. |
| * mem-break.c (default_memory_insert_breakpoint) |
| (default_memory_remove_breakpoint): Likewise. |
| * target.h (default_memory_remove_breakpoint) |
| (default_memory_insert_breakpoint): Likewise. |
| |
| * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as |
| parameter. Replace current_gdbarch by gdbarch. |
| * m32r-tdep.c (m32r_memory_insert_breakpoint) |
| (m32r_memory_remove_breakpoint): Likewise. |
| |
| 2008-02-19 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Add Vladimir Prus as MI maintainer. |
| |
| 2008-02-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Add entry describing Add support improvements. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by |
| M68K_FP0_REGNUM. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * sentinel-frame.c (sentinel_frame_prev_register): Do not call |
| register_offset_hack anymore. |
| |
| * regcache.{c,h} (register_offset_hack): Remove. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter. |
| |
| * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace |
| current_gdbarch by gdbarch. |
| (hppa64_hpux_find_global_pointer): Likewise. |
| * hppa-tdep.c (hppa_find_global_pointer): Likewise. |
| (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for |
| find_global_pointer. |
| |
| * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as |
| parameter. |
| * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise. |
| |
| * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead |
| of gdbarch_num_regs. |
| |
| * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and |
| replace current_gdbarch by gdbarch. |
| (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter |
| and replace current_gdbarch by gdbarch. |
| |
| (store_register): Update call for exec_one_dummy_insn. |
| (fetch_register, store_register): Update call of regmap. |
| |
| * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as |
| parameter and replace current_gdbarch by gdbarch. |
| |
| (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at |
| the current architecture. Update call for getregs_supplies and |
| getfpregs_supplies. |
| (ppcnbsd_fetch_inferior_registers): Likewise. |
| |
| * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and |
| replace current_gdbarch by gdbarch. |
| (ppcobsd_fetch_registers, ppcobsd_store_registers): Use |
| get_regcache_arch to get at the current architecture. Update call for |
| getfpregs_supplies. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch |
| variables. |
| |
| 2008-02-15 Markus Deuling <deuling@de.ibm.com> |
| |
| * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error. |
| |
| 2008-02-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * NEWS: Mention pending breakpints in MI. |
| |
| 2008-02-14 Markus Deuling <deuling@de.ibm.com> |
| |
| * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o. |
| |
| 2008-02-13 Markus Deuling <deuling@de.ibm.com> |
| |
| Add script to build and test GDB using enable-targets=all. |
| |
| * gdb_buildall.sh: New file. |
| |
| 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * NEWS (New native configurations): Xtensa GNU/Linux. |
| (New targets): Xtensa GNU/Linux. |
| * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and |
| xtensa-linux-tdep.o |
| (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c |
| (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies. |
| * configure.tgt (xtensa*-*-linux*): New entry. |
| * xtensa-config.c (xtensa_tdep): New variable. |
| (xtensa_config_byte_order, xtensa_config_tdep): Removed. |
| (rmap): Change format based on new macro XTREG. |
| (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h. |
| * xtensa-linux-nat.c: New. |
| * xtensa-linux-tdep.c: New. |
| * xtensa-xtregs.c: New. |
| * xtensa-tdep.h (xtensa_elf_gregset_t): Update. |
| (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE) |
| (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros. |
| (xtensa_register_t): New field coprocessor. |
| (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected. |
| * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed. |
| (xtensa_pseudo_register_read, xtensa_pseudo_register_write): |
| Update to handle privileged registers. |
| (xtensa_supply_gregset) Remove exccause and excvaddr registers. |
| (xtensa_push_dummy_call): Set windowstart register correctly. |
| (call0_analyze_prologue): Initialize xtensa_default_isa. |
| (xtensa_derive_tdep): New. |
| (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and |
| xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead. |
| Call xtensa_derive_tdep(). |
| * config/xtensa/linux.mh: New. |
| * regformats/reg-xtensa.dat: New. |
| |
| 2008-02-09 Aleksandar Ristovski <aristovski@qnx.com> (tiny change) |
| |
| * corelow.c (core_open): Use IS_ABSOLUTE_PATH. |
| (filenames.h): New include. |
| * Makefile.in (corelow.o): Add dependency for filenames.h. |
| |
| 2008-02-08 Doug Evans <dje@google.com> |
| |
| * source.c (find_and_open_source): Always rewrite absolute filenames. |
| |
| 2008-02-07 Doug Evans <dje@google.com> |
| |
| * breakpoint.c: #include "hashtab.h". |
| (ambiguous_names_p): New fn. |
| (update_breakpoint_locations): When restoring bp enable status, don't |
| compare function names if any functions have same name. |
| * Makefile.in (breakpoint.o): Add hashtab.h dependency. |
| |
| 2008-02-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (symbol_completion_add): Make SV parameter a VEC** |
| instead of just a VEC*. Update use of SV. |
| (ada_make_symbol_completion_list): Update symbol_completion_add calls. |
| |
| 2007-02-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Put all new commands since gdb-6.7 together. |
| |
| 2007-02-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c: #include "vec.h". |
| (struct string_vector, new_string_vector, string_vector_append): |
| Delete. |
| (char_ptr): New typedef. |
| (DEF_VEC_P (char_ptr)): New VEC type. |
| (symbol_completion_add): Update profile to take the new VEC type |
| instead of the old string_vector structure. Update code accordingly. |
| (ada_make_symbol_completion_list): Use the new VEC type instead of |
| the old string_vector structure, and update the code accordingly. |
| * Makefile.in (ada-lang.o): Add dependency on vec.h. |
| |
| 2008-02-06 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * p-exp.y: Set current_type in missing places. |
| (leftdiv_is_integer): New static variable. |
| Typecast right operand of BINOP_DIV to long_double if both operands |
| are integers. |
| |
| 2008-02-06 Maciej W. Rozycki <macro@mips.com> |
| |
| * remote-mips.c (set_breakpoint): Rename to... |
| (mips_set_breakpoint): ... this. |
| (clear_breakpoint): Rename to... |
| (mips_clear_breakpoint): ... this. |
| (common_breakpoint): Rename to... |
| (mips_common_breakpoint): ... this. |
| (check_lsi_error): Rename to... |
| (mips_check_lsi_error): ... this. |
| |
| 2007-02-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * language.h (struct language_defn): Add new field |
| la_make_symbol_completion_list. |
| * symtab.c (default_make_symbol_completion_list): Renames |
| make_symbol_completion_list. |
| (make_symbol_completion_list): New function. |
| * symtab.h (default_make_symbol_completion_list): Add declaration. |
| * langauge.c (unknown_language): Set la_make_symbol_completion_list. |
| (auto_language, local_language): Likewise. |
| * objc-lang.c (objc_language_defn): Likewise. |
| * scm-lang.c (scm_language_defn): Likewise. |
| * m2-lang.c (m2_language_defn): Likewise. |
| * f-lang.c (f_language_defn): Likewise. |
| * jv-lang.c (java_language_defn): Likewise. |
| * p-lang.c (pascal_language_defn): Likewise. |
| * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn) |
| (minimal_language_defn): Likewise. |
| * ada-lang.c (struct string_vector): New structure. |
| (new_string_vector, string_vector_append, ada_unqualified_name) |
| (add_angle_brackets, symbol_completion_match, symbol_completion_add) |
| (ada_make_symbol_completion_list): New functions. |
| (ada_language_defn): Set la_make_symbol_completion_list. |
| * ada-lang.h (ada_make_symbol_completion_list): Remove declaration, |
| this function is static. |
| |
| 2008-02-05 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer |
| to account for call site optimizations. |
| |
| 2008-02-05 Andrzej Zaborowski <balrogg@gmail.com> |
| |
| * tracepoint.c (read_actions): Handle end-of-text indicator |
| in action list properly. (Committed by Jim Blandy) |
| |
| 2008-02-05 Jim Blandy <jimb@red-bean.com> |
| |
| * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a |
| pseudoregister, not an internal error. |
| Reported by: Andrzej Zaborowski |
| |
| 2008-02-04 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * varobj.c (c_value_of_variable): Use xstrdup. |
| |
| 2008-02-04 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Update stored rendition of varobj value when format changes. |
| * varobj.c (varobj_set_display_format): Recomputed |
| print_value. |
| (c_value_of_variable): Return print_value. |
| |
| 2008-02-03 Doug Evans <dje@google.com> |
| |
| * eval.c (evaluate_subexp_standard): Fix type of result of mixed |
| integer/float division operations when EVAL_AVOID_SIDE_EFFECTS. |
| * valops.c (value_one): New function. |
| * value.h (value_one): Declare. |
| |
| Fix argument promotion for binary arithmetic ops for C. |
| * valarith.c (unop_result_type): New fn. |
| (binop_result_type): New fn. |
| (value_binop): Move result type computation to binop_result_type. |
| (value_pos, value_neg, value_complement): Move result type |
| computation to unop_result_type. |
| |
| PR 2384 |
| * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno. |
| Return basetype, fieldno if found. All callers updated. |
| Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different |
| objfile. |
| * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno. |
| * symfile.h (fill_in_vptr_fieldno): Delete. |
| |
| 2008-02-02 Doug Evans <dje@google.com> |
| |
| * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero. |
| |
| * typeprint.c (*): Whitespace cleanup. |
| |
| 2008-02-02 Mark Kettenis <kettenis@gnu.org> |
| Luis Machado <luisgpm@br.ibm.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that |
| don't fit into registerson the stack the way GCC does. |
| |
| 2008-02-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * symtab.c (symbol_set_names): Do not add an entry in the demangling |
| hash table for Ada symbols. Just store the linkage name as is, |
| and leave the demangled_name as NULL. |
| |
| 2007-02-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms |
| in the global scope. |
| (new_symbol): Likewise. |
| |
| 2008-02-01 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * breakpoint.c (break_command_1): Return void. |
| (break_command_really): Return void. Rethrow |
| exceptions instead of returning. |
| (gdb_breakpoint): Remove the error_message parameter. |
| Return void. Rename to set_breakpoint. |
| * gdb.h (gdb_breakpoint): Rename and move to... |
| * breakpoint.h (set_breakpoint): ...here. |
| * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore |
| event hooks even if exception is thrown. Adjust to |
| gdb_breakpoint interface changes. |
| |
| |
| 2008-02-01 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit |
| float in both first and second word in the doubleword, to support |
| old and new ABIs. |
| |
| 2008-02-01 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Properly rethrow exception. This fixes errors |
| about non-existent functions for -break-insert. |
| * breakpoint.c (break_command_really): Use throw_exception |
| for rethrowing. If rethrowing, don't print the exception. |
| |
| 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * NEWS: Mention Decimal Floating Point support. |
| |
| 2008-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned |
| value type to builtin_type_void_func_ptr. |
| |
| 2008-01-31 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * s390-tdep.c (is_float_singleton, is_float_like, |
| alignment_of, s390_return_value): Make checks for |
| TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well. |
| |
| 2008-01-31 Luis Machado <luisgpm@br.ibm.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * infcmd.c (default_print_registers_info): Also print hex |
| raw contents for TYPE_CODE_DECFLOAT registers. |
| * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member. |
| * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro. |
| (rs6000_register_name): Add support for DFP pseudo-registers. |
| (rs6000_pseudo_register_type): Likewise. |
| rs6000_pseudo_register_reggroup_p): Likewise. |
| (ppc_pseudo_register_read): New function. |
| (ppc_pseudo_register_write): Likewise. |
| (rs6000_pseudo_register_read): Likewise. |
| (rs6000_pseudo_register_write): Likewise. |
| (e500_pseudo_register_read): Move checks to |
| rs6000_pseudo_register_read. |
| (e500_pseudo_register_write): Move checks to |
| rs6000_pseudo_register_write. |
| (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install |
| rs6000_pseudo_register_read and rs6000_pseudo_register_write |
| in gdbarch if SPE or DFP is available. Adjust gdbarch's |
| num_pseudo_regs to account for DFP pseudo regs. |
| |
| 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member. |
| * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro. |
| (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type, |
| rs6000_pseudo_register_reggroup_p, e500_move_ev_register, |
| e500_pseudo_register_read, e500_pseudo_register_write): Use |
| IS_SPE_PSEUDOREG macro. |
| (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum. |
| (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable. |
| Remove initialization of tdep->ppc_ev31_regnum. |
| |
| 2008-01-08 Paul Hilfinger <hilfinger@adacore.com> |
| |
| * printcmd.c (print_formatted): Handle references as for unformatted |
| prints. |
| |
| 2008-01-30 Joel Brobecker <brobecker@adacore.com> |
| |
| * eval.c (evaluate_subexp_standard): Add handling of user |
| registers when in EVAL_AVOID_SIDE_EFFECTS mode. |
| |
| 2008-01-30 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * eval.c (evaluate_subexp_standard): Support |
| BINOP_INTDIV opcode. |
| |
| 2008-01-30 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * valarith.c (value_binop): Add floating-point BINOP_MIN and |
| BINOP_MAX cases. |
| For BINOP_EXP, use length and signedness of left operand only for |
| result, as for shifts. |
| For integral operands to BINOP_EXP, use new integer_pow and |
| uinteger_pow functions so as to get full range of results. |
| (integer_pow): New function. |
| (uinteger_pow): New function. |
| |
| 2008-01-30 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Use vector for varobj_list_children interface. |
| * gdb/varobj.c (varobj_list_children): Return vector |
| of varobjs. |
| * gdb/varobj.h (varobj_list_children): Adjust |
| prototype. |
| (varobj_p): Declare. Declare vector thereof. |
| * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust |
| for varobj_list_children change. |
| * Makefile.in (varobj_h): Update dependencies. |
| |
| 2008-01-30 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for |
| TYPE_CODE_DECFLOAT arguments. |
| (ppc64_sysv_abi_push_dummy_call) Likewise. |
| (get_decimal_float_return_value): New function. |
| (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return |
| values by calling get_decimal_float_return_value. |
| (ppc64_sysv_abi_return_value): Likewise. |
| |
| 2008-01-30 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Add field |
| for preprocessor macro information. Formatting changes. |
| |
| 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (struct remote_state): Add cached_wait_status. |
| (remote_exec_file): New variable. |
| (PACKET_vAttach, PACKET_vRun): New constants. |
| (extended_remote_restart): Do not query for status. |
| (struct start_remote_args): New. |
| (remote_start_remote): Take it as a second argument. Check |
| whether the target is running. Issue an error for non-running |
| non-extended targets. Cache the wait status. Set inferior_ptid |
| here. |
| (remote_open_1): Prompt to disconnect non-running targets. Make |
| sure the target is marked running. Do not set inferior_ptid here. |
| Update call to remote_start_remote. Do not call remote_check_symbols |
| if the target is not running. |
| (remote_detach_1): Rename from remote_detach. Take an EXTENDED |
| argument. Handle a non-running target. |
| (remote_detach): Use it. |
| (extended_remote_detach): New. |
| (remote_disconnect): Fix typo. Use remoute_mourn_1. |
| (extended_remote_attach_1, extended_remote_attach) |
| (extended_async_remote_attach): New. |
| (remote_vcont_resume): Remove unused variable. |
| (remote_wait, remote_async_wait): Use any cached wait status. |
| (putpkt_binary, getpkt): Clear any cached wait status. |
| (extended_remoute_mourn_1): New. |
| (extended_remote_mourn): Use it. |
| (extended_async_remote_mourn, extended_remote_run): New. |
| (extended_remote_create_inferior_1): New. |
| (extended_remote_create_inferior): Use it. |
| (extended_remote_async_create_inferior): Likewise. |
| (remote_xfer_partial): Skip for non-executing targets. |
| (init_extended_remote_ops): Set to_detach and to_attach. |
| (init_extended_async_remote_ops): Likewise. Use |
| extended_async_remote_mourn. |
| (_initialize_remote): Register vAttach, vRun, and |
| set remote exec-file. |
| * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. |
| |
| 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (symfile.o): Update. |
| * NEWS: Mention exec tracing support. |
| * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for |
| exec events. |
| * infcmd.c (kill_if_already_running, detach_command) |
| (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries. |
| * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete. |
| (follow_exec): Do not check may_follow_exec. Do not mourn and push |
| targets. Apply the sysroot path to the loaded executable. Use |
| no_shared_libraries. |
| * linux-nat.c (linux_child_follow_fork): Print fork following |
| messages if verbose. |
| (kill_wait_callback): Kill again before waiting a second time. |
| * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with |
| no_shared_libraries. |
| |
| 2008-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR. |
| |
| 2008-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * nto-tdep.h: Remove #include "defs.h". |
| * nto-tdep.c: Add #include "defs.h". |
| * Makefile.in (nto_tdep_h): Update dependencies. |
| (nto-tdep.o): Likewise. |
| |
| 2008-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter |
| and use it. |
| (proceed, start_remote): Update call to wait_for_inferior. |
| * inferior.h (wait_for_inferior): Update declaration. |
| * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c, |
| solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior. |
| * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as |
| TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED. |
| |
| 2008-01-29 Aleksandar Ristovski <aristovski@qnx.com> |
| |
| * varobj (adjust_value_for_child_access): Added checking for |
| returned value from gdb_value_ind. |
| (c_describe_child): Likewise. |
| (cplus_describe_child): Fixed a typo. |
| |
| 2008-01-29 Jim Blandy <jimb@red-bean.com> |
| |
| * MAINTAINERS: Update my info. |
| |
| 2008-01-29 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Use multiple locations for hardware watchpoints. |
| This eliminates the need to traverse value chain, doing |
| various checks, in three different places. |
| |
| * breakpoint.h (struct bp_location): New fields |
| lengths and watchpoint_type. |
| (struct breakpoint): Remove the val_chain field. |
| * breakpoint.c (is_hardware_watchpoint): New. |
| (free_valchain): Remove. |
| (update_watchpoint): New. |
| (insert_bp_location): For hardware watchpoint, just |
| directly insert it. |
| (insert_breakpoints): Call update_watchpoint_locations |
| on all watchpoints. If we have failed to insert |
| any location of a hardware watchpoint, remove all inserted |
| locations. |
| (remove_breakpoint): For hardware watchpoints, directly |
| remove location. |
| (watchpoints_triggered): Iterate over locations. |
| (bpstat_stop_status): Use only first location of |
| a resource watchpoint. |
| (delete_breakpoint): Don't call free_valchain. |
| (print_one_breakpoint): Don't print all |
| locations for watchpoints. |
| (breakpoint_re_set_one): Use update_watchpoint for |
| watchpoints. |
| |
| 2008-01-29 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Don't reset watchpoint block on solib load. |
| |
| * breakpoint.c (insert_bp_location): For watchpoints, |
| recompute condition. |
| (breakpoint_re_set_one): Instead of recomputing value |
| and condition for watchpoints, just reset value and |
| let insert_breakpoints/insert_bp_location recompute it. |
| Don't do anything about disabled watchpoint. |
| |
| 2008-01-29 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * valarith.c (value_binop): Handle unsigned integer |
| division by zero. |
| |
| 2008-01-28 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_analyze_prologue): Check for an |
| instruction pattern that appears frequently in position |
| independent code. Fix bug in code which looks for "fmov" and |
| backtracks if no "fmov" is found. |
| |
| 2008-01-28 Doug Evans <dje@google.com> |
| |
| * dbxread.c (read_dbx_symtab): Fix indentation. |
| Reformat comments to 80 columns. |
| Move local var def closer to only use. |
| |
| 2008-01-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * fork-child.c (SHELL_FILE): Remove #ifndef. |
| (fork_inferior): Remove SHELL_COMMAND_CONCAT. |
| |
| 2008-01-25 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * i386-tdep.c (i386_skip_noop): New function. |
| (i386_analyze_prologue): Call i386_skip_noop function. |
| |
| 2008-01-24 Michael Snyder <msnyder@specifix.com> |
| |
| * procfs.c (procfs_xfer_partial): Comment, cut/paste error. |
| * win32-nat.c (win32_xfer_partial): Ditto. |
| * target.c (default_xfer_partial): Minor whitespace adjustment. |
| |
| 2008-01-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't |
| strip bit 1 even if pc doesn't point to thumb code. |
| |
| 2008-01-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (remote_wait): Handle SIGINT between packets. |
| (remote_async_wait): Likewise. |
| |
| 2008-01-23 Vladimir Prus <vladimir@codesourcery.com> |
| Chris Demetriou <cgd@google.com> |
| |
| * thread.c (add_thread_silent): Renamed |
| from add_thread. |
| (print_thread_events): New variable definition. |
| (show_print_thread_events): New function. |
| (_initialize_thread): Add "set print thread-events" and |
| "show print thread-events" commands. |
| (add_thread): Announce new thread. |
| * gdbthread.h (add_thread_silent): Declare. |
| (print_thread_events): New variable declaration. |
| * inf-ttrace.c (inf_ttrace_wait): Don't |
| inform about new thread, as add_thread is always |
| called too, and will take care of that. |
| * infrun.c (handle_inferior_event): Likewise. |
| * procfs.c (procfs_wait): Likewise. |
| * remote.c (remote_currthread): Likewise. |
| * sol-thread.c (sol_thread_wait): Likewise. |
| * win32-nat.c (get_win32_debug_event): Likewise. |
| * linux-thread-db.c (attach_thread): Likewise. |
| Remove the verbose parameter. |
| (check_event): Make detach_thread be verbose |
| only if print_thread_events is set. |
| * linux-nat.c (lin_lwp_attach_lwp): Don't inform |
| about new thread. This is called only from |
| linux-thread-db.c:attach_thread, which will take care. |
| Remove the verbose parameter. |
| * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype. |
| |
| 2008-01-23 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output. |
| |
| 2008-01-22 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * breakpoint.c (break_command_really): New parameter |
| ignore_count. |
| (break_command_1): Pass 0 as |
| ignore_count to break_command_really. |
| (gdb_breakpoint): Pass ignore_count to |
| break_command_really. |
| |
| 2008-01-21 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find |
| sigcontext struct via pointer. |
| (struct sigframe comment): Update to show new field `psc'. |
| |
| 2008-01-21 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * infrun.c (handle_inferior_event): If |
| we failed to remove breakpoints, error, |
| don't try to increment PC by hand. |
| |
| 2008-01-18 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| Add NetBSD/hppa target and host support. |
| |
| * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ... |
| (hppabsd_gregset): Move to ... |
| (hppabsd_regset_from_core_section): Rename |
| hppaobsd_regset_from_core_section and move to ... |
| (hppabsd_find_global_pointer): Update comment. |
| (hppabsd_init_abi): Make global. Do not register |
| hppabsd_regset_from_core_section. |
| (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and |
| move to ... |
| (_initialize_hppabsd_tdep): Move to ... |
| * hppaobsd-tdep.c: ... here. New file. |
| * hppnbsd-tdep.c: New file. |
| * hppnbsd-nat.c: New file. |
| * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o. |
| (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c. |
| (hppabsd-nat.o, hppabsd-tdep.o): New dependencies. |
| (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies. |
| * configure.host (hppa*-*-netbsd*): New entry. |
| * configure.tgt (hppa*-*-netbsd*): New entry. |
| (hppa*-*-openbsd*): Update. |
| * NEWS (New native configuration): Mention NetBSD/hppa. |
| (New targets): Mention NetBSD/hppa. |
| |
| 2008-01-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * gdbarch.sh (function_list): Add new property bits_big_endian to |
| gdbarch structure. |
| * gdbarch.{c,h}: Regenerate. |
| |
| * value.c (struct value): Replace BITS_BIG_ENDIAN by |
| gdbarch_bits_big_endian (comment). |
| (unpack_field_as_long, modify_field): Likewise. |
| * value.h: Likewise (comment). |
| * valops.c (value_slice): Likewise. |
| * valarith.c (value_subscript, value_bit_index): Likewise. |
| * gdbtypes.h (field): Likewise (comment). |
| * eval.c (evaluate_subexp_standard): Likewise. |
| * dwarf2read.c (dwarf2_add_field): Likewise. |
| * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val) |
| (move_bits, ada_value_assign, value_assign_to_component): Likewise. |
| |
| * defs.h (BITS_BIG_ENDIAN): Remove. |
| |
| 2008-01-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate |
| function calls. |
| * m2-exp.y (yylex): Likewise. |
| * objc-exp.y (yylex): Likewise. |
| |
| * defs.h (DEPRECATED_STREQN): Remove. |
| |
| 2008-01-17 H.J. Lu <hjl.tools@gmail.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2008-01-17 Jim Blandy <jimb@codesourcery.com> |
| |
| * README: Mention gdbserver/README. |
| |
| 2008-01-17 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * valarith.c (value_binop): Handle BINOP_INTDIV |
| for unsigned and signed integers. |
| |
| 2008-01-17 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * s390-tdep.c (s390_gdbarch_init): Set default long double |
| type to 128-bit IEEE quad. |
| |
| 2008-01-17 Joel Brobecker <brobecker@adacore.com> |
| |
| * hpux-thread.c (hpux_thread_resume): Delete commented-out code. |
| |
| 2008-01-16 Mark Kettenis <kettenis@gnu.org> |
| |
| * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS. |
| |
| * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest. |
| * value.c: All callers changed. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace |
| DEPRECATED_STREQ by its expression. |
| * coffread.c (coff_locate_sections, coff_symtab_read): Likewise. |
| * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos) |
| (scan_xcoff_symtab): Likewise. |
| * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise. |
| * f-lang.c (find_common_for_function): Likewise. |
| * objc-exp.y (parse_number): Likewise. |
| |
| * defs.h (DEPRECATED_STREQ): Remove. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter. |
| * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use |
| get_frame_arch to get at the current_architecture. Update AM33_MODE |
| call. |
| (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller. |
| (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current |
| architecture. |
| (set_reg_offsets, mn10300_analyze_prologue): Fix indentation. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as |
| parameter. |
| * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise. |
| |
| (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| |
| * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers) |
| (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at |
| the current architecture. Update calls of |
| amd64_native_gregset_supplies_p. |
| * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers) |
| (amd64bsd_store_inferior_registers): Likewise. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter. |
| Replace current_gdbarch by gdbarch. Update caller. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * dbxread.c (repeated_header_complaint, dbx_symfile_init) |
| (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint) |
| (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1) |
| (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol) |
| (stabsect_build_psymtabs): Fix indentation. |
| |
| 2008-01-15 Michael Snyder <msnyder@specifix.com> |
| |
| * corelow.c (core_xfer_partial): Comment, cut/paste error. |
| |
| 2008-01-14 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * win32-nat.c (win32_create_inferior): Restore code calling |
| CloseHandle on ProcessInformation structure. |
| |
| 2008-01-13 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| * configure.ac: Check for void * as 3 argument of ptrace. |
| * configure: regenerate. |
| |
| 2008-01-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * alpha-tdep.c (alpha_heuristic_proc_start) |
| (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. |
| |
| (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the |
| current architecture by frame_info. Update alpha_heuristic_proc_start |
| call. |
| |
| (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use |
| get_frame_arch to get at the current architecture by frame_info. Update |
| alpha_sigtramp_register_address call. |
| |
| * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace |
| current_gdbarch by gdbarch. Update caller. |
| (convert_to_extended, convert_from_extended): Add endianess parameter |
| for comparison. Update caller. |
| (arm_extract_return_value, arm_store_return_value): Use |
| get_regcache_arch to get at the current architecture. |
| |
| * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add |
| gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch. |
| |
| * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add |
| gdbarch as parameter. Update caller. |
| (h8300_init_frame_cache): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| |
| * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and |
| update caller. Replace current_gdbarch by gdbarch. |
| |
| * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at |
| the current architecture. Replace current_gdbarch by gdbarch. |
| * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. |
| (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its |
| expression. Add gdbarch as parameter and replace current_gdbarch with |
| it. Update caller. |
| (M6811_TDEP): Remove. |
| (m68hc11_frame_prev_register): Use get_frame_arch to get at the current |
| architecture. |
| (m68hc11_scan_prologue): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| |
| * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and |
| update caller. |
| (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch |
| by gdbarch. |
| |
| * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update |
| caller. Relace current_gdbarch by gdbarch. |
| (altivec_register_p, spe_register_p): Likewise. |
| * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as |
| parameter. |
| * ppc-linux-nat.c (fetch_register, store_register): Update caller of |
| altivec_register_p and spe_register_p. |
| |
| * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update |
| caller. Replace current_gdbarch by gdbarch. |
| (score_analyze_prologue): use get_frame_arch to get at the current |
| architecture. |
| |
| * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter. |
| * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace |
| current_gdbarch by gdbarch. Update caller. |
| (sparc_frame_cache): Use get_frame_arch to get at the current |
| architecture. |
| * sparce64-tdep.c (sparc64_skip_prologue): Update call of |
| sparc_analyze_prologue. |
| |
| * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as |
| parameter. |
| |
| 2008-01-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * exec.c: #include "arch-utils.h" |
| (print_section_info): Use gdbarch_from_bfd to get at the |
| current architecture. Replace current_gdbarch. Fix indention. Replace |
| deprecated_print_address_numeric by paddress. |
| * Makefile.in (exec.o) Add dependency to arch-utils.h. |
| |
| * valprint.c (val_print_string): Replace |
| deprecated_print_address_numeric. |
| * tracepoint.c (trace_mention, scope_info): Likewise. |
| * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol) |
| (print_symbol, print_partial_symbols, maintenance_info_psymtabs) |
| (maintenance_check_symtabs): Likewise. |
| * symfile.c (list_overlays_command): Likewise. |
| * stack.c (frame_info, print_block_frame_labels): Likewise. |
| * printcmd.c (print_address, print_address_demangle) |
| (address_info): Likewise. |
| * corefile.c (memory_error): Likewise. |
| * infcmd.c (jump_command): Likewise. |
| * breakpoint.c (insert_bp_location, describe_other_breakpoints) |
| (mention, delete_breakpoint): Likewise. |
| * c-valprint.c (print_function_pointer_address, c_val_print): Likewise. |
| * dwarf2read.c (dump_die): Likewise. |
| * ada-valprint.c (ada_val_print_1): Likewise. |
| * f-valprint.c (f_val_print): Likewise. |
| * linux-fork.c (info_forks_command): Likewise. |
| * m32r-com.c (m32r_load_section, m32r_load) |
| (m32r_upload_command): Likewise. |
| |
| * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment. |
| |
| 2008-01-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * gdbarch.sh (skip_prologue): Add gdbarch |
| as parameter. |
| * gdbarch.{c,h}: Regenerate. |
| |
| * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter. |
| * amd64-tdep.c (amd64_skip_prologue): Likewise. |
| * avr-tdep.c (avr_skip_prologue): Likewise. |
| * cris-tdep.c (cris_skip_prologue): Likewise. |
| * frv-tdep.c (frv_skip_prologue): Likewise. |
| * h8300-tdep.c (h8300_skip_prologue): Likewise. |
| * hppa-tdep.c (hppa_skip_prologue): Likewise. |
| * i386-tdep.c (i386_skip_prologue): Likewise. |
| * ia64-tdep.c (ia64_skip_prologue): Likewise. |
| * iq2000-tdep.c (iq2000_skip_prologue): Likewise. |
| * m32r-tdep.c (m32r_skip_prologue): Likewise. |
| * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise. |
| * m68k-tdep.c (m68k_skip_prologue): Likewise. |
| * m88k-tdep.c (m88k_skip_prologue): Likewise. |
| * mep-tdep.c (mep_skip_prologue): Likewise. |
| * mips-tdep.c (mips_skip_prologue): Likewise. |
| * mn10300-tdep.c (mn10300_skip_prologue): Likewise. |
| * mt-tdep.c (mt_skip_prologue): Likewise. |
| * rs6000-tdep.c (rs6000_skip_prologue): Likewise. |
| * score-tdep.c (score_skip_prologue): Likewise. |
| * sh64-tdep.c (sh64_skip_prologue): Likewise. |
| * sh-tdep.c (sh_skip_prologue): Likewise. |
| * sparc64-tdep.c (sparc64_skip_prologue): Likewise. |
| * sparc-tdep.c (sparc32_skip_prologue): Likewise. |
| * spu-tdep.c (spu_skip_prologue): Likewise. |
| * v850-tdep.c (v850_skip_prologue): Likewise. |
| * vax-tdep.c (vax_skip_prologue): Likewise. |
| * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise. |
| * xtensa-tdep.c (xtensa_skip_prologue): Likewise. |
| |
| * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. |
| * m32c-tdep.c (m32c_skip_prologue): Likewise. |
| * s390-tdep.c (s390_skip_prologue): Likewise. |
| |
| 2008-01-10 Doug Evans <dje@google.com> |
| |
| * defs.h (struct continuation_arg): Fix typo in comment. |
| * target.c (target_translate_tls_address): Fix comment spelling error. |
| |
| 2008-01-09 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string. |
| (DOUBLEST_SCAN_FORMAT): Likewise. |
| * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT. |
| * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT. |
| * c-exp.y (parse_number): Likewise. |
| * jv-exp.y (parse_number): Likewise. |
| * objc-exp.y (parse_number): Likewise. |
| * p-exp.y (parse_number): Likewise. |
| |
| 2008-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.c (create_array_type): Add handling of null Ada arrays. |
| (check_typedef): Likewise. |
| |
| 2008-01-09 Luis Machado <luisgpm@br.ibm.com> |
| |
| * printcmd.c (printf_command): Add seen_big_h, seen_big_d and |
| seen_double_big_d, treat the new H, D, and DD modifiers as length |
| modifiers. |
| |
| 2008-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (read_enumeration_type): Add comment. |
| |
| 2008-01-08 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * config.in: Regenerate. |
| |
| 2008-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_convert_actual): Renames convert_actual. |
| Make non-static. |
| (ada_convert_actuals): Delete. |
| * ada-lang.h (ada_convert_actual): Add declaration. |
| (ada_convert_actuals): Remove declaration. |
| * infcall.c: #include "ada-lang.h". |
| (value_arg_coerce): Add new parameter sp. Update function |
| documetnation. Add handling of Ada function call parameters. |
| * Makefile.in (infcall.o): Update dependencies. |
| |
| 2008-01-08 Paul Hilfinger <hilfinger@adacore.com> |
| |
| * ada-lang.c (ensure_lval): Fix value lval kind. |
| (convert_actual): Add handling for arguments passed by reference. |
| |
| 2008-01-08 Doug Evans <dje@google.com> |
| |
| * dbxread.c (read_dbx_symtab): Fix indentation. |
| |
| 2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h. |
| (valarith.o): Depend on dfp.h. |
| (valops.o): Likewise. |
| * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h. |
| (set_decnumber_context): New function. |
| (decimal_check_errors): Likewise. |
| (decimal_from_number): Likewise. |
| (decimal_to_number): Likewise. |
| (decimal_from_string): Use set_decnumber_context and |
| decimal_check_errors. |
| (decimal_from_integral): New function. |
| (decimal_from_floating): Likewise. |
| (decimal_to_double): Likewise. |
| (promote_decimal): Likewise. |
| (decimal_binop): Likewise. |
| (decimal_is_zero): Likewise. |
| (decimal_compare): Likewise. |
| (decimal_convert): Likewise. |
| * dfp.h (decimal_from_integral): New prototype. |
| (decimal_from_floating): Likewise. |
| (decimal_to_double): Likewise. |
| (decimal_binop): Likewise. |
| (decimal_is_zero): Likewise. |
| (decimal_compare): Likewise. |
| (decimal_convert): Likewise. |
| * eval.c (evaluate_subexp_standard): Remove expect_type argument from |
| call to value_from_decfloat. |
| * valarith.c: Include dfp.h. |
| (value_args_as_decimal): New function. |
| (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values. |
| (value_logical_not): Likewise. |
| (value_equal): Likewise. |
| (value_less): Likewise. |
| (value_pos): Likewise. |
| (value_neg): Formatting fix. |
| * valops.c: Include dfp.h. |
| (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values. |
| * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT. |
| (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT. |
| (value_from_decfloat): Remove expect_type argument. |
| * value.h (value_from_decfloat): Update prototype. |
| |
| 2008-01-07 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Ignore change in name of dynamic linker during |
| execution on Solaris. This also unbreaks pending breakpoints. |
| |
| * solist.h (struct target_so_ops): New field same. |
| * solib-svr4.c (svr4_same): New. |
| (_initialize_svr4_solib): Register svr4_same. |
| * solib.c (update_solib_list): Use ops->same, if available. |
| |
| 2008-01-06 Christopher Faylor <me+cygwin@cgf.cx> |
| |
| * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings |
| when using MS-DOS paths. |
| |
| 2008-01-05 Pedro Alves <pedro@codesourcery.com> |
| |
| * NEWS: Mention --pid and --core command line behaviour changes. |
| |
| 2008-01-05 Pedro Alves <pedro@codesourcery.com> |
| |
| * main.c (captured_main): Remove 'count' varible and the |
| ALIGN_STACK_ON_ENTRY block that used it. Error out if --core and |
| --pid options were issued simultaneously. If an explicit pid |
| option was passed, don't fallback to core file. Detect extra |
| arguments better in the presence of explicit pid or core |
| arguments. |
| |
| 2008-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_which_variant_applies): Correctly compute |
| the value of the discriminant when the variant record is packed. |
| |
| 2008-01-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes |
| that are used to differentiate homonyms. |
| |
| 2008-01-04 Jerome Guitton <guitton@adacore.com> |
| |
| * ada-lang.c (decode_packed_array_type): Avoid a seg fault |
| when the type is an anonymous pointer type. |
| (ada_check_typedef): Avoid a seg fault when the type is null. |
| * ada-typeprint.c (print_array_type): Add support for pointer |
| to packed arrays. |
| |
| 2008-01-04 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment. |
| |
| 2008-01-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in |
| EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS. |
| |
| 2008-01-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-exp.y (chop_separator): New function. |
| (write_selectors): Rewrite to re-use chop_separator. |
| (ada_nget_field_index, get_symbol_field_type): New functions. |
| (write_var_or_type): Add support for "ptype TYPENAME.FIELD" |
| expressions. |
| |
| 2008-01-03 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead |
| of SYMBOL_VALUE when working with function symbols. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER |
| expressions. These expressions do not need to be rewriten. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (read_enumeration_type): Flag type as stub if |
| the given die is a declaration. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_array_bound_from_type): Make non-static. |
| Handle properly the case when the index type is an enumerated type. |
| Do not return the subtype of the bounds type, just return the |
| bounds type directly - this is not needed and is more consistent |
| with what we do for arrays when no XA parallel type exists. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (static_unwrap_type): Add forward declaration. |
| (template_to_static_fixed_type): Fields of dynamic types sometimes |
| also need to be unwrapped. Take this into account. |
| (ada_to_fixed_type_1): Renamed from ada_to_fixed_type. |
| (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1. |
| * ada-typeprint.c (ada_print_type): Get the typename from |
| the original type, not the base type. |
| |
| 2008-01-03 Jerome Guitton <guitton@adacore.com> |
| |
| * ada-lang.c (ada_value_struct_elt, to_fixed_array_type) |
| (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value): |
| Update calls to ada_to_fixed_type. |
| (ada_template_to_fixed_record_type_1): Ditto, but without looking |
| for the tag. |
| (ada_to_fixed_type): Add check_tag parameter; do not look for |
| tag if null. When looking for a tag, use a fixed record type. |
| * ada-lang.h (ada_to_fixed_type): Add check_tag parameter. |
| * ada-valprint.c (printable_val_type, ada_value_print): Update |
| calls to ada_to_fixed_type. |
| |
| 2008-01-03 Luis Machado <luisgpm@br.ibm.com> |
| |
| * doublest.c (convert_floatformat_to_doublest): Call |
| floatformat_to_doublest instead of floatformat_to_double and use |
| DOUBLEST variables. |
| (convert_doublest_to_floatformat): Call floatformat_from_doublest |
| instead of floatformat_from_double and use DOUBLEST variables. |
| |
| 2008-01-03 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| * MAINTAINERS (Write After Approval): Add self. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * symfile.c (set_initial_language): Make non-static. |
| * symfile.h (set_initial_language): Add declaration. |
| * language.c: #include "symfile.h". |
| (set_language): Call set_initial_language if the frame language |
| could not be determined. |
| |
| 2008-01-03 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * eval.c (evaluate_subexp_for_address): Provide frame address to |
| locate_var_value only if it will be needed. |
| |
| 2008-01-02 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB. |
| |
| 2008-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_evaluate_subexp): Modify the value returned |
| when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory. |
| This is needed to make sure that any other treatment applied |
| to the resulting value does not fail for spurious reason, |
| such as trying to take the address of this value. |
| |
| 2008-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_value_equal): Dereference reference types when |
| comparing arrays. |
| |
| 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Updated copyright notices for most files. |
| |
| 2008-01-01 Christopher Faylor <me+gdb@cgf.cx> |
| |
| * win32-nat.c (psapi_module_handle): Remove static. |
| (get_module_name): Rename from psapi_get_dll_name. Revamp slightly to |
| return first module found if base_address is zero. Don't initialize |
| psapi function pointers here. Convert to cygwin paths when |
| appropriate. |
| (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine |
| executable name. Use get_module_name when that fails or when |
| !__CYGWIN__. |
| (_initialize_psapi): New function. Initialize psapi stuff before it is |
| needed or issue a warning if it is not found. Move psapi_module_handle |
| here. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_remove_trailing_digits): New function. |
| (ada_remove_po_subprogram_suffix): New function. |
| (ada_decode): Improve. Move the description of the algorithm |
| directly inside the code, instead of in the function global |
| description. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref |
| and always print the dereferenced value. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling |
| of the case where the first argument is a reference. |
| (ada_evaluate_subexp, case BINOP_ADD): Likewise. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Implement support for Ada interface types. |
| |
| * ada-lang.c (ada_is_dispatch_table_ptr_type): New function. |
| (ada_is_ignored_field): Ignore fields that are a dispatch table |
| of a tagged type. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ChangeLog-2007: New ChangeLog rotation. |
| * ChangeLog: Reset for 2008. |
| * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and |
| ChangeLog-2007. |
| |
| For older changes see ChangeLog-2007. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |