# OBSOLETE # Copyright 1992, 1995, 1996, 1997, 1999 Free Software Foundation, Inc.
# OBSOLETE 
# OBSOLETE # This program is free software; you can redistribute it and/or modify
# OBSOLETE # it under the terms of the GNU General Public License as published by
# OBSOLETE # the Free Software Foundation; either version 2 of the License, or
# OBSOLETE # (at your option) any later version.
# OBSOLETE # 
# OBSOLETE # This program is distributed in the hope that it will be useful,
# OBSOLETE # but WITHOUT ANY WARRANTY; without even the implied warranty of
# OBSOLETE # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# OBSOLETE # GNU General Public License for more details.
# OBSOLETE # 
# OBSOLETE # You should have received a copy of the GNU General Public License
# OBSOLETE # along with this program; if not, write to the Free Software
# OBSOLETE # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
# OBSOLETE 
# OBSOLETE # Please email any bugs, comments, and/or additions to this file to:
# OBSOLETE # bug-gdb@prep.ai.mit.edu
# OBSOLETE 
# OBSOLETE if $tracelevel then {
# OBSOLETE 	strace $tracelevel
# OBSOLETE }
# OBSOLETE 
# OBSOLETE if [skip_chill_tests] then { continue }
# OBSOLETE 
# OBSOLETE set prms_id 0
# OBSOLETE set bug_id 0
# OBSOLETE 
# OBSOLETE # Set the current language to chill.  This counts as a test.  If it
# OBSOLETE # fails, then we skip the other tests.
# OBSOLETE 
# OBSOLETE set testfile "tests2"
# OBSOLETE set srcfile ${srcdir}/$subdir/${testfile}.ch
# OBSOLETE set binfile ${objdir}/${subdir}/${testfile}.exe
# OBSOLETE if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
# OBSOLETE     perror "Couldn't compile ${srcfile}"
# OBSOLETE     return -1
# OBSOLETE }
# OBSOLETE 
# OBSOLETE global infinity
# OBSOLETE if [istarget "i*86-*-sysv4*"] then {
# OBSOLETE     set infinity "inf"
# OBSOLETE } else {
# OBSOLETE     set infinity "Infinity"
# OBSOLETE }
# OBSOLETE 
# OBSOLETE proc set_lang_chill {} {
# OBSOLETE     global gdb_prompt
# OBSOLETE     global binfile objdir subdir
# OBSOLETE 
# OBSOLETE     if ![file exists $objdir/$subdir/$binfile] then {
# OBSOLETE 	return 0
# OBSOLETE     }
# OBSOLETE     verbose "loading file '$objdir/$subdir/$binfile'"
# OBSOLETE     gdb_load $objdir/$subdir/$binfile
# OBSOLETE 
# OBSOLETE     send_gdb "set language chill\n"
# OBSOLETE     gdb_expect {
# OBSOLETE 	-re ".*$gdb_prompt $" {}
# OBSOLETE 	timeout { fail "set language chill (timeout)" ; return 0 }
# OBSOLETE     }
# OBSOLETE 
# OBSOLETE     send_gdb "show language\n"
# OBSOLETE     gdb_expect {
# OBSOLETE 	-re ".* source language is \"chill\".*$gdb_prompt $" {
# OBSOLETE 	    pass "set language to \"chill\""
# OBSOLETE 	    send_gdb "break dummyfunc\n"
# OBSOLETE 	    gdb_expect {
# OBSOLETE 		-re ".*$gdb_prompt $" {
# OBSOLETE 		    send_gdb "run\n"
# OBSOLETE 		    gdb_expect -re ".*$gdb_prompt $" {}
# OBSOLETE 		    return 1
# OBSOLETE 		}
# OBSOLETE 		timeout {
# OBSOLETE 		    fail "can't set breakpoint (timeout)"
# OBSOLETE 		    return 0
# OBSOLETE 		}
# OBSOLETE 	    }
# OBSOLETE 	}
# OBSOLETE 	-re ".*$gdb_prompt $" {
# OBSOLETE 	    fail "setting language to \"chill\""
# OBSOLETE 	    return 0
# OBSOLETE 	}
# OBSOLETE 	timeout {
# OBSOLETE 	    fail "can't show language (timeout)"
# OBSOLETE 	    return 0
# OBSOLETE 	}
# OBSOLETE     }
# OBSOLETE }
# OBSOLETE 
# OBSOLETE # checks if structure was accessed correctly
# OBSOLETE proc test_write { args } {
# OBSOLETE     global gdb_prompt
# OBSOLETE 
# OBSOLETE     if [llength $args]==5 then {
# OBSOLETE 	set message [lindex $args 4]
# OBSOLETE 	set extended [lindex $args 3]
# OBSOLETE 	set matchval [lindex $args 2]
# OBSOLETE     } elseif [llength $args]==4 then {
# OBSOLETE 	set message [lindex $args 3]
# OBSOLETE 	set matchval [lindex $args 2]
# OBSOLETE 	set extended ""
# OBSOLETE     } elseif [llength $args]==3 then {
# OBSOLETE 	set message [lindex $args 2]
# OBSOLETE 	set extended ""
# OBSOLETE     } else {
# OBSOLETE 	warning "test ($args) write called with wrong number of arguments"
# OBSOLETE 	return 
# OBSOLETE     }
# OBSOLETE 
# OBSOLETE     set location [lindex $args 0]
# OBSOLETE     set value [lindex $args 1]
# OBSOLETE     if ![info exists matchval] then {
# OBSOLETE 	set matchval $value
# OBSOLETE     }
# OBSOLETE     verbose "loc: $location, val: $value, msg: $message, ext: $extended, match: $matchval"
# OBSOLETE 
# OBSOLETE     verbose "setting var $value..."
# OBSOLETE     send_gdb "set var $location.m$extended := $value\n"
# OBSOLETE     gdb_expect -re ".*$gdb_prompt $" {}
# OBSOLETE     gdb_test "print $location" \
# OBSOLETE       ".*= \[\[\]\\.p1: 2863311530, \\.m: $matchval, \\.p2: 1431655765\[\]\]"\
# OBSOLETE       "$message"
# OBSOLETE }
# OBSOLETE 
# OBSOLETE # test write access from gdb (setvar x:=y) from gdb
# OBSOLETE proc write_access { } {
# OBSOLETE     global infinity
# OBSOLETE 
# OBSOLETE     verbose "testing write access to locations"
# OBSOLETE     
# OBSOLETE     # discrete modes
# OBSOLETE     test_write b1 127 "byte write 1"
# OBSOLETE     test_write b1 -128 "byte write 2"
# OBSOLETE     test_write b1 0 "byte write 3"
# OBSOLETE     test_write ub1 255 "ubyte write 1"
# OBSOLETE     test_write ub1 0 "ubyte write 2"
# OBSOLETE     test_write ub1 42 "ubyte write 3"
# OBSOLETE     test_write i1 32767 "int write 1"
# OBSOLETE     test_write i1 -32768 "int write 2"
# OBSOLETE     test_write i1 0 "int write 3"
# OBSOLETE     test_write ui1 65535 "uint write 1"
# OBSOLETE     test_write ui1 0 "uint write 2"
# OBSOLETE     test_write ui1 123 "uint write 3"
# OBSOLETE     test_write l1 2147483647 "long write 1"
# OBSOLETE     test_write l1 -2147483648 "long write 2"
# OBSOLETE     test_write l1 0 "long write 3"
# OBSOLETE     test_write ul1 4294967295 "ulong write 1"
# OBSOLETE     test_write ul1 0 "ulong write 2"
# OBSOLETE     test_write ul1 1000000 "ulong write 3"
# OBSOLETE     test_write bo1 FALSE "bool write 1"
# OBSOLETE     test_write bo1 TRUE "bool write 2"
# OBSOLETE     test_write c1 \"1234\" "char write 1"
# OBSOLETE     test_write c2 \"1234567\" "char write 2"
# OBSOLETE     test_write c3 \"654321\" "char write 3"
# OBSOLETE     test_write c4 C'65' 'e' "char write 4"
# OBSOLETE     test_write bi1 B'10100101' "bitstring write 1"
# OBSOLETE     test_write bi2 B'0101001010' "bitstring write 2"
# OBSOLETE     test_write se1 a "set write 1"
# OBSOLETE     test_write se1 h "set write 2"
# OBSOLETE     # The following two use numbered sets with too-large values.
# OBSOLETE     setup_xfail "*-*-*"
# OBSOLETE     test_write nse1 nb "numbered set write 1"
# OBSOLETE     setup_xfail "*-*-*"
# OBSOLETE     test_write nse1 nc "numbered set write 2"
# OBSOLETE     test_write r1 127 "range write 1"
# OBSOLETE     test_write r2 32767 "range write 2"
# OBSOLETE     test_write r3 2147483647 "range write 3"
# OBSOLETE 
# OBSOLETE     # powerset modes
# OBSOLETE     test_write p1 {[pa:ph]} {\[pa:ph\]} "powerset write 1"
# OBSOLETE     test_write p1 {[pa, pc:pf, ph]} {\[pa, pc:pf, ph\]} "powerset write 2"
# OBSOLETE     test_write p1 {[pa, pc, pe, pg]} {\[pa, pc, pe, pg\]} "powerset write 3"
# OBSOLETE     test_write p1 {[]} {\[\]} "powerset write 4"
# OBSOLETE     test_write p2 {[1:32]} {\[1:32\]} "powerset write 5"
# OBSOLETE     test_write p2 {[1, 3:30, 32]} {\[1, 3:30, 32\]} "powerset write 6"
# OBSOLETE     test_write p2 {[1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31]} {\[1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31\]} \
# OBSOLETE 	"powerset write 7"
# OBSOLETE     test_write p2 {[]} {\[\]} "powerset write 8"
# OBSOLETE 
# OBSOLETE # Fixme: this should be rejected by gnuchill
# OBSOLETE #    test_write p3 {[-2147483648:2147483647]} {\[-2147483648:2147483647\]} \
# OBSOLETE #	"powerset write 9"
# OBSOLETE #    test_write p3 {[-2147483648, -1000000:1000000, 2147483647]} \
# OBSOLETE #	{\[-2147483648, -1000000:1000000, 2147483647\]} \
# OBSOLETE #	"powerset write 10"
# OBSOLETE #    test_write p3 {[-99, -97, -95, 1001, 1003, 1005]} \
# OBSOLETE #	{\[-99, -97, -95, 1001, 1003, 1005\]} "powerset write 11"
# OBSOLETE #    test_write p3 {[]} {\[\]} "powerset write 12"
# OBSOLETE     
# OBSOLETE     # reference modes
# OBSOLETE     test_write ref1 ->ref1 {H'[0-9a-fA-F]+} "reference write 1"
# OBSOLETE     test_write ref2 ->b1 {H'[0-9a-fA-F]+} "reference write 2"
# OBSOLETE     test_write ref1 NULL "reference write 3"
# OBSOLETE     test_write ref2 NULL "reference write 4"
# OBSOLETE 
# OBSOLETE     # procedure modes
# OBSOLETE     test_write pr1 NULL "procefure write 1"
# OBSOLETE     # FIXME: remove when NULL is understood
# OBSOLETE     test_write pr1 0 NULL "procefure write 2"
# OBSOLETE     test_write pr1 dummyfunc {H'[0-9a-fA-F]+ <dummyfunc>} "procedure write 3"
# OBSOLETE 
# OBSOLETE     # timing modes, FIXME when callbacks to timefunctions are implemented
# OBSOLETE     #test_write ti1 abstime(1970, 3, 12, 10, 43, 0) {} "time write 1"
# OBSOLETE     #test_write ti2 <set somehow a duration>
# OBSOLETE     xfail "timing modes not implemented yet"
# OBSOLETE     
# OBSOLETE     # real modes
# OBSOLETE     # This ones 
# OBSOLETE     test_write re1 42.03 {42.0[0-9]*} "real write 1"
# OBSOLETE     test_write re1 0 "real write 2"
# OBSOLETE     test_write re1 "1e+38" {1e\+38|1\.0[0-9]*e\+38|9\.9[0-9]*e\+37} \
# OBSOLETE 	"real write 3"
# OBSOLETE     setup_xfail "i*86-pc-linux-gnu" "m68*-*-hpux*"
# OBSOLETE     test_write re1 "1e+39" $infinity "real write 4"
# OBSOLETE     test_write re2 42.03 {42.0[0-9]*} "real write 5"
# OBSOLETE     test_write re2 0 "real write 6"
# OBSOLETE     test_write re2 "1e+308" {1e\+308} "real write 7"
# OBSOLETE     setup_xfail "i*86-pc-linux-gnu" "m68*-*-hpux*"
# OBSOLETE     test_write re2 "1e+309" $infinity "real write 8"
# OBSOLETE     # array modes
# OBSOLETE     test_write arrl1 {[(1:3): [(1:2): -128]]} {\[\(1:3\): \[\(1:2\): -128\]\]}\
# OBSOLETE 	"array write 1"
# OBSOLETE     test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\
# OBSOLETE 	"array write 2"
# OBSOLETE     test_write arrl1 {[(1): [(1:2): 127], (2): [(1:2): -128], (3): [(1:2): 127]]} {\[\(1\): \[\(1:2\): 127\], \(2\): \[\(1:2\): -128\], \(3\): \[\(1:2\): 127\]\]}\
# OBSOLETE 	"array write 3"
# OBSOLETE      test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\
# OBSOLETE  	"array write 4"
# OBSOLETE      setup_xfail "*-*-*"
# OBSOLETE      # Bogus test case - type mismatch?
# OBSOLETE      test_write arrl1 {[(1): 127, (2): -128]} "array write 5"
# OBSOLETE      test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\
# OBSOLETE  	"array write 6"
# OBSOLETE 
# OBSOLETE     # structure modes
# OBSOLETE     test_write strul1 {[.a: -32768, .b: 32767, .ch: "ZZZZ"]} \
# OBSOLETE 	{\[\.a: -32768, \.b: 32767, \.ch: \"ZZZZ\"\]} \
# OBSOLETE 	"structure write 1"
# OBSOLETE     test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \
# OBSOLETE 	{\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \
# OBSOLETE 	"structure write 2"
# OBSOLETE     test_write strul1 -32768 {\[\.a: -32768, \.b: 0, \.ch: \"0000\"\]} \
# OBSOLETE 	{.a} "structure write 3"
# OBSOLETE     test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \
# OBSOLETE 	{\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \
# OBSOLETE 	"structure write 4"
# OBSOLETE     test_write strul1 -32768 {\[\.a: 0, \.b: -32768, \.ch: \"0000\"\]} \
# OBSOLETE 	{.b} "structure write 5"
# OBSOLETE     test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \
# OBSOLETE 	{\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \
# OBSOLETE 	"structure write 6"
# OBSOLETE     test_write strul1 \"HUGO\" {\[\.a: 0, \.b: 0, \.ch: \"HUGO\"\]} \
# OBSOLETE 	{.ch} "structure write 7"
# OBSOLETE }
# OBSOLETE 
# OBSOLETE # Start with a fresh gdb.
# OBSOLETE 
# OBSOLETE set binfile "tests2.exe"
# OBSOLETE 
# OBSOLETE gdb_exit
# OBSOLETE gdb_start
# OBSOLETE gdb_reinitialize_dir $srcdir/$subdir
# OBSOLETE 
# OBSOLETE gdb_test "set print sevenbit-strings" ".*"
# OBSOLETE 
# OBSOLETE if [set_lang_chill] then {
# OBSOLETE     write_access
# OBSOLETE } else {
# OBSOLETE     warning "$test_name tests suppressed."
# OBSOLETE }