| 2011-02-21 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (mips_ip) <'o'>: Remove duplicate |
| initialization of offset_reloc. |
| |
| 2011-02-15 Richard Henderson <rth@redhat.com> |
| |
| * dw2gencfi.c (dot_cfi_dummy): New. |
| (cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New. |
| * read.c (pobegin): Unconditionally call cfi_pop_insert. |
| |
| 2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2011-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-lex.l (BYTEOP2M): Remove tokenization. |
| * config/bfin-parse.y (BYTEOP2M): Delete token. |
| (asm_1): Remove BYTEOP2M insn matching. |
| |
| 2011-02-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-defs.h: Include opcode/bfin.h. |
| (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete. |
| |
| 2011-02-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * doc/c-bfin.texi (Instruction Delimiting): Fix occur typo. |
| (Modify Registers): Fix subtracted typo. |
| (.byte2): Extend and swap descriptions with .byte4. |
| (.byte4): Extend and swap descriptions with .byte2. |
| (.db, .dw, .dd): Document behavior. |
| |
| 2011-02-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP. |
| |
| 2011-02-11 Alan Modra <amodra@gmail.com> |
| |
| * doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify. |
| |
| 2011-02-10 Alan Modra <amodra@gmail.com> |
| |
| * doc/as.texinfo (Overview): Add missing markup around Blackfin |
| and PowerPC options. |
| |
| 2011-02-10 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC. |
| * doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options. |
| (Overview <Target PowerPC options>): Add a number of missing options. |
| * doc/c-ppc.texi: Likewise. Add markup for use in manpage generation. |
| |
| 2011-02-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/6957 |
| * config/tc-i386.c (i386_align_code): Use f32_patt when tuning |
| for i686. |
| |
| 2011-02-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags |
| for ISA extensions. |
| (md_parse_option): Likewise. |
| |
| 2011-02-04 Bernd Schmidt <bernds@codesourcery.com> |
| |
| * doc/as.texinfo (Target TIC6X options): Don't mention "-matomic". |
| * doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic". |
| (TIC6X Options): Don't mention "-matomic". |
| * config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete. |
| (md_longopts): Remove corresponding entries. |
| (md_parse_option): Don't handle them. |
| (md_show_usage): Don't document them. |
| (tic6x_atomic): Delete variable. |
| (tic6x_update_features): Always copy tic6x_arch_enable to |
| tic6x_features. |
| (tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC. |
| (s_tic6x_atomic, s_tic6x_noatomic): Remove functions. |
| (md_pseudo_table): Remove ".atomic" and ".noatomic". |
| |
| 2011-01-31 Nick Clifton <nickc@redhat.com> |
| |
| * write.c (write_contents): Include output file name and bfd error |
| value when reporting the inability to write to the output file. |
| * config/tc-rx.c (rx_handle_align): Do not insert NOPs into align |
| frag that has a non-zero fill value. |
| |
| 2011-01-27 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rx.c (md_convert_frag): If we can't compute the target |
| address, zero out the values stored in the object file to make |
| objdump's output consistent. |
| |
| 2011-01-26 Kai Tietz <kai.tietz@onevision.com> |
| |
| * config/tc-i386.c (md_begin): Set for x64 windows COFF target |
| x86_dwarf2_return_column to 32. |
| |
| 2011-01-20 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12384 |
| * config/tc-h8300.c (constant_fits_width_p): Use correct type for |
| comparison. |
| |
| 2011-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * write.c (compress_debug): Return if section size is smaller |
| than 32 bytes. |
| |
| 2011-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/12409 |
| * write.c (compress_debug): Return if section size is 0. |
| |
| 2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com> |
| |
| * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible |
| cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te. |
| * doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te, |
| fmp626} options. |
| |
| 2011-01-18 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/12390 |
| * doc/all.texi: Add NS32K |
| * doc/as.texinfo: Remove target specific details of which |
| characters act as comment initiators and statement separators into |
| individual target specific files. |
| * doc/c-alpha.texi (Alpha-Chars): Document special behaviour of |
| the hash character at the start of a line. |
| * doc/c-arm.texi (ARM-Chars): Likewise. |
| * doc/c-avr.texi (AVR-Chars): Likewise. |
| * doc/c-d10v.texi (D10V-Chars): Likewise. |
| * doc/c-d30v.texi (D30V-Chars): Likewise. |
| * doc/c-mmix.texi (MMIX-Chars): Likewise. |
| * doc/c-s390.texi (s390 characters): Likewise. |
| * doc/c-sh.texi (SH-Chars): Likewise. |
| * doc/c-sh64.texi (SH64-Chars): Likewise. |
| * doc/c-sparc.texi (SPARC-Chars): Likewise. |
| * doc/c-tic6x.texi (TIC6X Syntax): Likewise. |
| * doc/c-xtensa.texi (Xtensa Syntax): Likewise. |
| * doc/c-z80.texi (Z80-Chars): Likewise. |
| * doc/c-z8k.texi (Z8000-Chars): Likewise. |
| * doc/c-pdp11.texi (PDP11-Syntax): Document line separator character. |
| * doc/c-arc.texi (ARC-Chars): Fill in this subsection. |
| * doc/c-bfin.texi (Blackfin Syntax): Document line comment and |
| line separator characters. |
| * doc/c-cr16.texi (CR16 Syntax): Likewise. |
| * doc/c-i386.texi (i386-Chars): Likewise. |
| * doc/c-i860.texi (i860-Chars): Likewise. |
| * doc/c-i960.texi (i960-Chars): Likewise. |
| * doc/c-ip2k.texi (IP2K-Chars): Likewise. |
| * doc/c-lm32.texi (LM32-Chars): likewise. |
| * doc/c-m32c.texi (M32C-Chars): Likewise. |
| * doc/c-m68hc11.texi (M68HC11-syntax): Likewise. |
| * doc/c-m68k.texi (M68K-Chars): Likewise. |
| * doc/c-microblaze.texi (MicroBlaze-Chars): Likewise. |
| * doc/c-msp430.texi (MSP430-Chars): Likewise. |
| * doc/c-mt.texi (MT-Chars): Likewise. |
| * doc/c-ns32k.texi (NS32K-Chars): Likewise. |
| * doc/c-pj.texi (PJ-Chars): Likewise. |
| * doc/c-ppc.texi (PowerPC-Chars): Likewise. |
| * doc/c-rx.texi (RX-Chars): Likewise. |
| * doc/c-score.texi (SCORE-Chars): Likewise. |
| * doc/c-tic54x.texi (TIC54X-Chars): Likewise. |
| * doc/c-v850.texi (V850-Chars): Likewise. |
| * doc/c-vax.texi (VAX-Chars): Likewise. |
| * doc/c-xc16x.texi (xc16x-Chars): Likewise. |
| |
| 2011-01-17 Quentin Neill <quentin.neill@amd.com> |
| |
| * config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS. |
| |
| * doc/c-i386.texi (i386-TBM): New section. |
| |
| 2011-01-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (disallow_64bit_disp): Renamed to ... |
| (disallow_64bit_reloc): This. |
| (md_assemble): Don't check movabs for x32 mode here. |
| (i386_target_format): Updated. |
| (tc_gen_reloc): Check if 64bit relocations are allowed. |
| |
| 2011-01-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (disallow_64bit_disp): New. |
| (x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with |
| X86_64_ABI/X86_64_X32_ABI. |
| (md_assemble): Don't allow movabs with relocation in x32 mode. |
| (i386_target_format): Updated. |
| |
| 2011-01-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (OPTION_N32): Renamed to ... |
| (OPTION_X32): This. |
| (md_longopts): Replace n32 with x32. |
| (md_parse_option): Updated. |
| (md_show_usage): Likewise. |
| |
| * doc/c-i386.texi: Replace --n32 with --x32. |
| |
| 2011-01-11 Mingjie Xing <mingjie.xing@gmail.com> |
| |
| * config/tc-mips.c (mips_ip): Update error messages. Take an |
| unadjusted offset for "+c" argument. |
| |
| 2011-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-i386.c (x86_elf_abi): Only define for targets that use |
| it. |
| |
| 2011-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only |
| part of the file. |
| |
| 2011-01-10 Nathan Sidwell <nathan@codesourcery.com> |
| Glauber de Oliveira Costa <glommer@gmail.com> |
| |
| * doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and |
| .tlsdescseq directive. |
| * config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc |
| following a symbol. |
| (s_arm_tls_descseq): New directive. |
| (md_pseudo_table): Add it. |
| (encode_branch): Allow TLS_CALL relocs too. |
| (do_t_blx, do_t_branch23): Use encode_branch. |
| (reloc_names): Add tlsdesc and tlscall. |
| (md_apply_fix): Process tls desc relocations. |
| (tc_gen_reloc): Likewise. |
| (arm_fix_adjustable): Likewise. |
| |
| 2011-01-07 Quentin Neill <quentin.neill@amd.com> |
| |
| * config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS. |
| |
| * doc/c-i386.texi (i386-BMI): New section. |
| |
| 2011-01-06 Paul Koning <ni1d@arrl.net> |
| |
| * config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative |
| references to absolute addresses. |
| |
| 2011-01-05 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression |
| instead of an RH_NEG32 one. |
| |
| 2011-01-05 Jonathan Wakely <jwakely.gcc@gmail.com> |
| |
| * doc/c-i386.texi: Clarify --n32. |
| |
| 2011-01-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit |
| integer registers in VEX.vvvv. Check register-only source |
| operand when two source operands are swapped. Properly update |
| destination when two source operands are swapped. |
| |
| 2011-01-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * gas.c (parse_args): Update copyright to 2011. |
| |
| For older changes see ChangeLog-2010 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
