| 2010-03-25 Tom Tromey <tromey@redhat.com> |
| |
| PR gdb/11327, PR gdb/11328, PR breakpoints/11368: |
| * infrun.c (handle_inferior_event): Change initialization of |
| stop_stack_dummy. |
| (handle_inferior_event): Change assignment to stop_stack_dummy. |
| (normal_stop): Update use of stop_stack_dummy. |
| (struct inferior_status) <stop_stack_dummy>: Change type. |
| * inferior.h (stop_stack_dummy): Update. |
| * infcmd.c (stop_stack_dummy): Change type. |
| * infcall.c (cleanup_delete_std_terminate_breakpoint): New |
| function. |
| (call_function_by_hand): Call set_std_terminate_breakpoint. |
| Rewrite std::terminate handling. |
| * breakpoint.h (enum bptype) <bp_std_terminate, |
| bp_std_terminate_master>: New. |
| (enum stop_stack_kind): New. |
| (struct bpstat_what) <call_dummy>: Change type. |
| (set_std_terminate_breakpoint, delete_std_terminate_breakpoint): |
| Declare. |
| * breakpoint.c (create_std_terminate_master_breakpoint): New |
| function. |
| (update_breakpoints_after_exec): Handle bp_std_terminate_master. |
| Call create_std_terminate_master_breakpoint. |
| (print_it_typical): Handle new breakpoint kinds. |
| (bpstat_stop_status): Handle bp_std_terminate_master. |
| (bpstat_what): Correctly set call_dummy field. Handle |
| bp_std_terminate_master and bp_std_terminate. |
| (print_one_breakpoint_location): Update. |
| (allocate_bp_location): Update. |
| (set_std_terminate_breakpoint): New function. |
| (delete_std_terminate_breakpoint): Likewise. |
| (create_thread_event_breakpoint): Update. |
| (delete_command): Update. |
| (breakpoint_re_set_one): Update. |
| (breakpoint_re_set): Call create_std_terminate_master_breakpoint. |
| |
| 2010-03-25 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symfile.c (build_section_addr_info_from_bfd): New. |
| (build_section_addr_info_from_objfile): Base it on |
| build_section_addr_info_from_bfd. |
| (addrs_section_compar, addrs_section_sort): New. |
| (addr_info_make_relative): New variables my_cleanup, abfd_addrs, |
| addrs_sorted, abfd_addrs_sorted and addrs_to_abfd_addrs. Build |
| addrs_to_abfd_addrs. Use it for recalculating ADDRS. |
| |
| 2010-03-24 Michael Snyder <msnyder@localhost.localdomain> |
| |
| * elfread.c (find_separate_debug_file_by_buildid): |
| Remove unused local variable. |
| |
| 2010-03-24 Tom Tromey <tromey@redhat.com> |
| |
| PR breakpoints/9352: |
| * NEWS: Mention changes to `commands' and `rbreak'. |
| * symtab.c (do_end_rbreak_breakpoints): New function. |
| (rbreak_command): Call start_rbreak_breakpoints; arrange to call |
| end_rbreak_breakpoints. |
| * breakpoint.c (breakpoint_count, tracepoint_count): Now static. |
| (set_breakpoint_count): Likewise. Clear last_was_multi. |
| (multi_start, multi_end, last_was_multi): New globals. |
| (start_rbreak_breakpoints, end_rbreak_breakpoints): New |
| functions. |
| (struct commands_info): New |
| (do_map_commands_command): New function. |
| (commands_command_1): New function. |
| (commands_command): Use it. |
| (commands_from_control_command): Likewise. |
| (do_delete_breakpoint): New function. |
| (delete_command): Use it. |
| (map_breakpoint_numbers): Add 'data' argument. Pass to callback. |
| (do_map_disable_breakpoint): New function. |
| (disable_command): Use it. |
| (do_map_enable_breakpoint): New function. |
| (enable_command): Use it. |
| (enable_once_breakpoint): Add argument. |
| (enable_once_command): Update. |
| (enable_delete_breakpoint): Add argument. |
| (enable_delete_command): Update. |
| (break_command_really): Set last_was_multi when needed. |
| (check_tracepoint_command): Fix formatting. |
| (validate_commands_for_breakpoint): New function. |
| (breakpoint_set_commands): Use it. |
| (tracepoint_save_command): Update. |
| * breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints): |
| Declare. |
| |
| 2010-03-24 Tom Tromey <tromey@redhat.com> |
| |
| * breakpoint.h (struct counted_command_line): New struct. |
| (struct breakpoint) <commands>: Change type. |
| (struct bpstats) <commands>: Change type. |
| <commands_left>: New field. |
| * breakpoint.c (alloc_counted_command_line): New function. |
| (incref_counted_command_line): Likewise. |
| (decref_counted_command_line): Likewise. |
| (do_cleanup_counted_command_line): Likewise. |
| (make_cleanup_decref_counted_command_line): Likewise. |
| (breakpoint_set_commands): Use decref_counted_command_line and |
| alloc_counted_command_line. |
| (commands_command): Don't error if breakpoint commands are |
| executing. |
| (commands_from_control_command): Likewise. |
| (bpstat_free): Update. |
| (bpstat_copy): Likewise. |
| (bpstat_clear_actions): Likewise. |
| (bpstat_do_actions_1): Likewise. |
| (bpstat_stop_status): Likewise. |
| (print_one_breakpoint_location): Likewise. |
| (delete_breakpoint): Likewise. |
| (bpstat_alloc): Initialize new field. |
| (tracepoint_save_command): Update. |
| * tracepoint.c (encode_actions): Update. |
| (trace_dump_command): Update. |
| |
| 2010-03-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * dwarf2-frame.c (dwarf2_frame_find_quirks): Use producer_is_realview. |
| * dwarf2read.c (load_full_comp_unit): Read DW_AT_producer. |
| (read_structure_type): For RealView, set TYPE_STUB on structures with |
| no byte size and no children. |
| (read_subroutine_type): Mark functions as prototyped by default. |
| * symtab.c (producer_is_realview): New function. |
| * symtab.h (expand_line_sal): Fix declaration formatting. |
| (producer_is_realview): Declare. |
| |
| 2010-03-24 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-tdep.c (skip_prologue_function): New function. |
| (submask, bit, bits, sbits, BranchDest): Move higher in the file. |
| (thumb_analyze_prologue): Document return value. Recognize more |
| Thumb instructions, skippable calls, and some Thumb-2 instructions. |
| Add debug output. |
| (arm_skip_prologue): Remove call dummy check. Check the prologue |
| for non-GNU compilers. |
| (arm_instruction_changes_pc): New function. |
| (arm_analyze_prologue): New function, broken out from |
| arm_scan_prologue. Recognize more ARM instructions and skippable |
| calls. Update comments. Handle NULL cache. Return the address |
| of the first unrecognized instruction. Do not skip past other |
| instructions which change control flow. Add debug output. |
| (arm_scan_prologue): Use arm_analyze_prologue. |
| (ARM_PC_32): Delete. |
| (shifted_reg_val): Simplify ARM_PC_32 check. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * tracepoint.c (tvariables_info_1): Actually compute |
| the number of rows in the result. |
| |
| 2010-03-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * remote.c (crc32): Constify `buf' parameter. |
| (remote_verify_memory): New, abstracted out from... |
| (compare_sections_command): ... this. Remove hardcoded target |
| checks. |
| (init_remote_ops): Install remote_verify_memory. |
| * target.c (target_verify_memory): New. |
| * target.h (struct target_ops) <to_verify_memory>: New field. |
| (target_verify_memory): Declare. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement -trace-save. |
| |
| * mi-cmds.h (mi_cmds_trace_save): Declare. |
| * mi-cmds.c (mi_cmds): Register -trace-save. |
| * mi/mi-main.c (mi_cmd_trace_save): New. |
| * remote.c (remote_save_trace_data): Take const parameter. |
| * target.h (struct target_ops::to_save_trace_data): Take |
| const parameter. |
| * target.c (update_current_target): Adjust to the above. |
| * tracepoint.c (trave_save): New, extracted from |
| (trace_save_command): ...this. |
| (tfile_trace_find): Remove message that is unnecessary now |
| that 'tfind' reports found frame. |
| * tracepoint.h (trace_save): Declare. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement -trace-find. |
| |
| * mi/mi-cmds.c (mi_cmds): Register -trace-find. |
| * mi/mi-cmds.h (mi_cmd_trace_find): Declare. |
| * mi/mi-main.c (mi_cmd_trace_find): New. |
| * target.h (struct target_ops): Document to_trace_find. |
| * tracepoint.h (tfind_1): Declare. |
| * tracepoint.c (finish_tfind_command): Rename to... |
| (tfind_1): ...this. |
| * remote.c (remote_trace_find): Return -1 if target say |
| there's no frame. Improve error diagnostics. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| -trace-define-variable and -trace-list-variables. |
| |
| * tracepoint.c (create_trace_state_variable): Make |
| private copy of name, as opposed to assuming the |
| pointer lives forever. |
| (tvariables_info_1): New. |
| (tvariables_info): Use the above. |
| * tracepoint.h (create_trace_state_variable, tvariables_info_1): |
| Declare. |
| * mi/mi-cmds.c (mi_cmds): Register -trace-define-variable |
| and -trace-list-variables. |
| * mi/mi-cmds.h (mi_cmd_trace_define_variable) |
| (mi_cmd_trace_list_variables): New. |
| * mi/mi-main.c (mi_cmd_trace_define_variable) |
| (mi_cmd_trace_list_variables): New. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement -break-passcount. |
| |
| * mi/mi-cmd-break.c (mi_cmd_break_passcount): New. |
| * mi/mi-cmds.c (mi_cmds): Register -break-passcount. |
| * mi/mi-cmds.h (mi_cmd_break_passcount): Declare. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| -trace-start/-trace-end/-trace-status. |
| |
| * mi/mi-cmds.c (mi_cmds): Register -trace-start, -trace-status |
| and -trace-stop. |
| * mi/mi-cmds.h (mi_cmd_trace_start, mi_cmd_trace_status) |
| (mi_cmd_trace_stop): Declare. |
| * mi/mi-main.c (mi_cmd_trace_start, mi_cmd_trace_status) |
| (mi_cmd_trace_stop): New. |
| * tracepoint.c (start_tracing): New, extracted from... |
| (trace_start_command): ...this. |
| (trace_status_mi): New. |
| * tracepoint.h (struct trace_status): Document |
| stopping_tracepoint. |
| (start_tracing, stop_tracing, trace_status_mi): Declare. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement creating tracepoints with -break-insert. |
| |
| * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle -a |
| to mean that tracepoint should be created. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * breakpoint.c (check_no_tracepoint_commands): Use |
| current spelling of 'teval'. |
| |
| 2010-03-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Unify actions and commands |
| |
| * defs.h (read_command_lines, read_command_lines_1): New |
| parameters validator and closure. |
| * tracepoint.h (struct action_line): Remove. |
| * breakpoint.h (struct breakpoint): Remove the 'actions' |
| field. |
| * defs.h (enum command_control_type): New value |
| while_stepping_control. |
| (struct command_line): Add comments. |
| * breakpoint.c (breakoint_is_tracepoint): New. |
| (breakpoint_set_commands): For tracepoints, |
| verify the commands are permissible. |
| (check_tracepoint_commands): New. |
| (commands_command): Require that each new line is validated using |
| check_tracepoint_command, if we set commands for a tracepoint. |
| (create_tracepoint_from_upload): Likewise. |
| (print_one_breakpoint_location): Remove the code to print |
| actions specifically. |
| (tracepoint_save_command): Relay to print_command_lines. |
| * cli/cli-script.c (process_next_line): New parameters validator |
| and closure. Handle 'while-stepping'. Call validator if not null. |
| (read_command_lines, read_command_lines1): Likewise. |
| (recurse_read_control_structure): New parameters validator and |
| closure. Handle while_stepping_control. |
| (print_command_lines): Handle while-stepping. |
| (get_command_line, define_command, document_command): Adjust. |
| * remote.c (remote_download_tracepoint): Adjust. |
| * tracepoint.c (make_cleanup_free_actions, read_actions) |
| (free_actions, do_free_actions_cleanup): Remove. |
| (trace_actions_command): Use read_command_lines. |
| (validate_actionline): Use error in one place. |
| (encode_actions_1): New, extracted from... |
| (encode_actions): ...this. Also use cleanups for exception |
| safety. |
| (trace_dump_command): Adjust. |
| * mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if |
| it's tracepoint. |
| |
| 2010-03-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (OPCODES_CFLAGS): Add -I$(OPCODES_SRC)/.. |
| |
| 2010-03-22 Stan Shebs <stan@codesourcery.com> |
| |
| * value.c (value_static_field): Be lazy about the field's value. |
| |
| 2010-03-22 Reid Kleckner <reid@kleckner.net> |
| |
| PR gdb/11094 |
| * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Add |
| bp_jit_event. |
| (disable_breakpoints_in_shlibs): Likewise. |
| |
| 2010-03-22 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * dwarf2read.c (partial_die_parent_scope): Work around buggy |
| GCC 4.1 debug info generation (GCC PR c++/28460). |
| (determine_prefix): Likewise. |
| |
| 2010-03-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * tui/tui-disasm.c (tui_get_begin_asm_address): Default to |
| get_current_arch. |
| * tui/tui-layout.c (extract_display_start_addr): Likewise. |
| |
| 2010-03-19 Stan Shebs <stan@codesourcery.com> |
| |
| * ax-gdb.c (gen_fetch): Handle bool. |
| (gen_usual_unary): Ditto. |
| (gen_cast): Ditto. |
| (gen_equal): New function. |
| (gen_less): New function. |
| (gen_expr_binop_rest): Call them, also return integer type from |
| logical operations. |
| (gen_expr): Ditto. |
| |
| 2010-03-19 Tom Tromey <tromey@redhat.com> |
| |
| * jv-lang.c (jv_dynamics_objfile_data_key) |
| (jv_type_objfile_data_key): New globals. |
| (class_symtab): Move earlier. |
| (jv_per_objfile_free): New function. |
| (get_dynamics_objfile): Call set_objfile_data. Add 'gdbarch' |
| parameter. |
| Remove ancient #if 1. |
| (add_class_symbol): Remove redundant declaration. |
| (java_lookup_class): Use alloc_type, not alloc_type_arch. |
| (java_link_class_type): Mark as static. Update. |
| (jv_clear_object_type): New function. |
| (set_java_object_type): Likewise. |
| (get_java_object_type): Use set_java_object_type. |
| (is_object_type): Likewise. |
| (_initialize_java_language): Register new objfile keys. |
| (get_java_class_symtab): Add 'gdbarch' parameter. |
| (add_class_symtab_symbol): Update. |
| (type_from_class): Update. |
| |
| 2010-03-19 Stan Shebs <stan@codesourcery.com> |
| |
| * ax-general.c (ax_const_l): Fix a sizing bug. |
| |
| 2010-03-18 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.1 released. |
| |
| 2010-03-18 Stan Shebs <stan@codesourcery.com> |
| Pedro Alves <pedro@codesourcery.com> |
| |
| * target.h (struct target_ops): New method |
| to_set_circular_trace_buffer. |
| (target_set_circular_trace_buffer): New macro. |
| * target.c (update_current_target): Add |
| to_set_circular_trace_buffer, fix to_set_disconnected_tracing |
| default behavior. |
| * remote.c (remote_set_circular_trace_buffer): New function. |
| (init_remote_ops): Add it to vector. |
| * tracepoint.h (struct trace_status): New field traceframes_created, |
| change buffer_size and buffer_free to int. |
| * tracepoint.c (circular_trace_buffer): New global. |
| (start_tracing): Send values of disconnected tracing and circular |
| trace buffer settings. |
| (set_circular_trace_buffer): New function. |
| (parse_trace_state): Handle total space and frames created. |
| (trace_status_command): Display total space and total frames |
| created. |
| (trace_save): Write out new status values. |
| (parse_trace_status): Set traceframe_count, traceframes_created, |
| buffer_free and buffer_size to -1 by default. |
| (_initialize_tracepoint): New setshow for circular-trace-buffer. |
| * NEWS: Mention the circular trace buffer option. |
| |
| 2010-03-18 Tom Tromey <tromey@redhat.com> |
| |
| * infcmd.c (finish_command_continuation): Wrap print_return_value |
| in TRY_CATCH. |
| |
| 2010-03-18 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (add_partial_subprogram): Make sure the subprogram |
| DIE has a name before creating the associated partial symbol. |
| (read_func_scope): Emit a complaint if the subprogram does not |
| have a name or when we can't extract the subprogram PC bounds. |
| |
| 2010-03-18 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * mi/mi-main.c (mi_cmd_list_thread_groups): Use get_current_arch |
| instead of selected frame architecture. |
| |
| 2010-03-18 Pedro Alves <pedro@codesourcery.com> |
| |
| * infcmd.c (until_command): Use ERROR_NO_INFERIOR. Ensure there's |
| a valid selected thread, and that it is not running. |
| (advance_command): Ditto. |
| (finish_command): Ditto. |
| |
| 2010-03-17 Stan Shebs <stan@codesourcery.com> |
| |
| * ax-gdb.c (require_rvalue): Disallow non-scalars. |
| |
| * infcall.c: Include tracepoint.h. |
| (call_function_by_hand): Disallow calls in tfind mode. |
| * infcmd.c: Include tracepoint.h. |
| (ensure_not_tfind_mode): New function. |
| (continue_1): Call it. |
| (step_1) Ditto. |
| (jump_command): Ditto. |
| (signal_command): Ditto. |
| (advance_command): Ditto. |
| (until_command): Ditto. |
| (finish_command): Ditto. |
| * tracepoint.h (disconnect_or_stop_tracing): Declare. |
| |
| * ax-gdb.h (struct axs_value): New field optimized_out. |
| (gen_trace_for_var): Add gdbarch argument. |
| * ax-gdb.c (gen_trace_static_fields): New function. |
| (gen_traced_pop): Call it, add gdbarch argument. |
| (gen_trace_for_expr): Update call to it. |
| (gen_trace_for_var): Ditto, and report optimized-out variables. |
| (gen_struct_ref_recursive): Check for optimized-out value. |
| (gen_struct_elt_for_reference): Ditto. |
| (gen_static_field): Pass gdbarch instead of expression, assume |
| optimization if field not found. |
| (gen_var_ref): Set the optimized_out flag. |
| (gen_expr): Error on optimized-out variable. |
| * tracepoint.c (collect_symbol): Handle struct-valued vars as |
| expressions, skip optimized-out variables with computed locations. |
| * dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of |
| erroring out if location expression missing. |
| (loclist_tracepoint_var_ref): Don't error out here. |
| |
| 2010-03-17 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (dwarf2_get_section_info): Handle case where no |
| DWARF data is available. |
| |
| 2010-03-17 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * symfile.c (generic_load): Reset breakpoints after loading. |
| |
| 2010-03-17 Tom Tromey <tromey@redhat.com> |
| |
| * linux-nat.c (linux_nat_detach): Check debug_linux_nat. |
| |
| 2010-03-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * spu-tdep.c (spu_catch_start): Replace set_breakpoint call with the |
| create_breakpoint call, adjust the parameters. |
| |
| 2010-03-16 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Chandru <chandru@in.ibm.com> |
| |
| * dwarf2read.c (read_subrange_type): Set TYPE_HIGH_BOUND_UNDEFINED. |
| * valarith.c (value_subscripted_rvalue): Suppress error if |
| TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED. |
| |
| 2010-03-16 Holger Hans Peter Freyther <zecke@selfish.org> |
| |
| * linux-record.c (record_linux_msghdr): Remove unintended semicolons. |
| |
| 2010-03-16 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-tasks.c (task_command_1): Check that the task ptid is valid |
| before doing the associated thread switch. |
| |
| 2010-03-16 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2010-03-16 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Simplify MI breakpoint setting. |
| |
| * breakpoint.c (break_command_really): Make nonstatic and |
| rename to... |
| (create_breakpoint): ...this. Rename prior function by this name |
| to... |
| (create_breakpoint_sal): ...this. |
| (create_breakpoints): Rename to... |
| (create_breakpoints_sal): ...this. |
| (set_breakpoint): Remove. |
| * breakpoint.h: Adjust to above changes. |
| * mi/mi-cmd-break.c (mi_cmd_break_insert): Simplify. |
| |
| 2010-03-15 Stan Shebs <stan@codesourcery.com> |
| |
| * ax-gdb.c: Include cp-support.h. |
| (find_field): Remove. |
| (gen_primitive_field): New function. |
| (gen_struct_ref_recursive): New function. |
| (gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead |
| of find_field. |
| (gen_static_field): New function. |
| (gen_struct_elt_for_reference): New. |
| (gen_namespace_elt): New. |
| (gen_maybe_namespace_elt): New. |
| (gen_aggregate_elt_ref): New. |
| (gen_expr): Add OP_SCOPE, display opcode name in error message. |
| |
| 2010-03-15 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (die_needs_namespace): Also return 0 for |
| DW_TAG_subprogram. |
| |
| 2010-03-15 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| PR c++/7936: |
| * cp-support.h: Added char *declaration element to using_direct |
| data struct. |
| (cp_add_using): Added char *declaration argument. |
| (cp_add_using_directive): Ditto. |
| (cp_lookup_symbol_imports): made extern. |
| * cp-namespace.c: Updated with the above changes. |
| * dwarf2read.c (read_import_statement): Ditto. |
| (read_namespace): Ditto. |
| (read_import_statement): Support import declarations. |
| * cp-namespace.c (cp_lookup_symbol_imports): Check for imported |
| declarations. |
| Added support for 'declaration_only' search. |
| (cp_lookup_symbol_namespace): Attempt to search for the name as |
| is before consideration of imports. |
| * symtab.c (lookup_symbol_aux_local): Added a 'declaration_only' |
| search at every block level search. |
| Now takes language argument. |
| (lookup_symbol_aux): Updated. |
| |
| 2010-03-15 Tom Tromey <tromey@redhat.com> |
| |
| * c-exp.y (name_not_typename): Add 'operator' clause. |
| |
| 2010-03-15 Ralf Corsepius <ralf.corsepius@rtems.org> (tiny change) |
| |
| * configure.ac: Exit if ${gdb_target_obs}" is not set. |
| * configure: Regenerate. |
| |
| 2010-03-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symfile.c (addr_info_make_relative): Ignore also missing ".dynbss" |
| and ".sdynbss". Update the comment. |
| |
| 2010-03-15 Jie Zhang <jie@codesourcery.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdbtypes.h (TYPE_IS_OPAQUE): Correct HAVE_CPLUS_STRUCT check. |
| |
| 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * charset.c [USE_WIN32API]: Include <windows.h>. |
| (_initialize_charset): Correct type of w32_host_default_charset. |
| |
| 2010-03-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * infrun.c (ptid_match): Don't assert that PTID is not a pid ptid. |
| |
| 2010-03-12 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/9708: |
| * dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: A variable |
| in a lexical block does not need a namespace. |
| (new_symbol) <DW_TAG_variable>: Put extern variables on |
| list_in_scope in all cases. |
| |
| 2010-03-12 Stan Shebs <stan@codesourcery.com> |
| |
| * ax-gdb.c (gen_expr): Add shift expressions. |
| (gen_expr_binop_rest): Ditto. |
| |
| 2010-03-12 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| * buildsym.c (finish_block): Reset using_directives pointer |
| after block initialization. |
| |
| 2010-03-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * amd64-tdep.c (amd64_word_names): Replace "sp" with "". |
| * i386-tdep.c (i386_word_names): Likewise. |
| |
| 2010-03-12 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.c (memory_xfer_partial): Don't use the stack cache if |
| inspecting trace frames. |
| * tracepoint.c (finish_tfind_command): Invalidate the target |
| dcache. |
| |
| 2010-03-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered |
| for the PIC displacement, print also the displacement value. |
| (svr4_exec_displacement): Print DISPLACEMENT if INFO_VERBOSE. |
| |
| 2010-03-10 Kevin Buettner <kevinb@redhat.com> |
| |
| * remote-mips.c (close_ports, mips_initialize_cleanups) |
| (mips_exit_cleanups, mips_send_command, mips_open, pmon_open) |
| (ddb_open, lsi_open, mips_remove_breakpoint, mips_remove_watchpoint) |
| (mips_stopped_by_watchpoint, send_srec, pmon_checkset) |
| (pmon_make_fastrec, pmon_check_ack, mips_expect_download) |
| (pmon_check_entry_address, pmon_check_total, pmon_end_download) |
| (pmon_download, pmon_load_fast, _initialize_remote_mips): Add |
| comments describing each of these functions. |
| (mips_enter_debug, mips_exit_debug, common_open) |
| (mips_signal_from_protocol, pmon_makeb64, pmon_zeroset): Add |
| blank line after the comment describing the function. |
| |
| 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (svr4_exec_displacement): Return now success, new |
| parameter displacementp. Update comment. |
| (svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS |
| element exists. Return if svr4_exec_displacement was not successful. |
| Update comment. |
| |
| 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * solib-svr4.c (read_program_header): Support type == -1 to read |
| all program headers. |
| (read_program_headers_from_bfd): New function. |
| (svr4_static_exec_displacement): Remove and move the comment ... |
| (svr4_exec_displacement): ... here. Remove variable found. New |
| variable displacement. Check also DYNAMIC. Verify DISPLACEMENT |
| alignment for ELF targets. Compare target vs. exec_bfd PHDRs for ELF |
| targets using read_program_headers_from_bfd. Remove the call of |
| svr4_static_exec_displacement. |
| |
| 2010-03-10 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (struct pubnames_header): Remove. |
| (_PUBNAMES_HEADER): Remove. |
| (_ACTUAL_PUBNAMES_HEADER_SIZE): Remove. |
| (struct aranges_header): Remove. |
| (_ARANGES_HEADER, _ACTUAL_ARANGES_HEADER_SIZE): Remove. |
| (struct dwarf2_per_objfile) <pubnames, aranges>: Remove. |
| (PUBNAMES_SECTION): Remove. |
| (ARANGES_SECTION): Remove. |
| (dwarf2_locate_sections): Don't handle pubnames or aranges. |
| (dwarf2_build_psymtabs): Remove dead code. |
| (dwarf2_build_psymtabs_easy): Remove. |
| |
| 2010-03-10 Tom Tromey <tromey@redhat.com> |
| |
| * elfread.c (elf_symfile_read): Don't call |
| dwarf2_build_frame_info. |
| * dwarf2read.c (struct dwarf2_section_info) <readin>: New field. |
| (struct dwarf2_per_objfile) <objfile>: New field. |
| (dwarf2_has_info): Now idempotent. Set objfile field. |
| (dwarf2_read_section): Check and set readin field. Call |
| posix_madvise. |
| (dwarf2_build_psymtabs): Don't read all sections. |
| (read_type_comp_unit_head): Read types section. |
| (create_debug_types_hash_table): Likewise. |
| (init_cu_die_reader): Add asserts. |
| (process_type_comp_unit): Add assert. |
| (dwarf2_build_psymtabs_hard): Read info section. |
| (load_partial_comp_unit): Add assert. |
| (create_all_comp_units): Read info section. |
| (load_full_comp_unit): Likewise. |
| (dwarf2_ranges_read): Read ranges section. |
| (dwarf2_record_block_ranges): Add assert. |
| (dwarf2_read_abbrevs): Read abbrev section. |
| (read_indirect_string): Read str section. |
| (dwarf_decode_line_header): Read line section. |
| (read_signatured_type_at_offset): Read types section. |
| (dwarf_decode_macros): Read macinfo section. |
| (dwarf2_symbol_mark_computed): Read loc section. |
| * dwarf2-frame.c (dwarf2_frame_find_fde): Call |
| dwarf2_build_frame_info. |
| (dwarf2_build_frame_info): Unconditionally set |
| dwarf2_frame_objfile_data on the objfile. |
| * configure.ac: Check for posix_madvise. |
| * config.in, configure: Rebuild. |
| |
| 2010-03-10 Tom Tromey <tromey@redhat.com> |
| |
| * xcoffread.c (xcoff_start_psymtab): Update. |
| (xcoff_end_psymtab): Update. |
| * psymtab.c (allocate_psymtab): Remove dead code. |
| * psympriv.h (struct partial_symtab) <read_symtab_private>: Now |
| void*. |
| * mdebugread.c (parse_partial_symbols): Update. |
| (new_psymtab): Likewise. |
| * dwarf2read.c (process_psymtab_comp_unit): Update. |
| (psymtab_to_symtab_1): Update. |
| * dbxread.c (start_psymtab): Update. |
| (end_psymtab): Likewise. |
| |
| 2010-03-10 Tom Tromey <tromey@redhat.com> |
| |
| * xcoffread.c: Include psymtab.h. |
| (xcoff_sym_fns): Update. |
| * symtab.h (struct partial_symbol): Remove. |
| (PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove. |
| (struct partial_symtab): Remove. |
| (PSYMTAB_TO_SYMTAB): Remove. |
| (lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab) |
| (find_pc_sect_psymtab): Remove. |
| (find_pc_sect_symtab_via_partial): Declare. |
| (find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab) |
| (find_main_psymtab): Remove. |
| (find_main_filename): Declare. |
| (fixup_psymbol_section): Remove. |
| (fixup_section): Declare. |
| * symtab.c: Include psymtab.h. |
| (lookup_symtab): Use lookup_symtab method. |
| (lookup_partial_symtab): Remove. |
| (find_pc_sect_psymtab_closer): Remove. |
| (find_pc_sect_psymtab): Remove. |
| (find_pc_sect_symtab_via_partial): New function. |
| (find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove. |
| (fixup_section): No longer static. |
| (fixup_psymbol_section): Remove. |
| (lookup_symbol_aux): Use lookup_symbol_aux_quick. |
| (lookup_global_symbol_from_objfile): Likewise. |
| (lookup_symbol_aux_psymtabs): Remove. |
| (lookup_symbol_aux_quick): New function. |
| (lookup_symbol_global): Use lookup_symbol_aux_quick. |
| (lookup_partial_symbol): Remove. |
| (basic_lookup_transparent_type_quick): New function. |
| (basic_lookup_transparent_type): Use it. |
| (find_main_psymtab): Remove. |
| (find_main_filename): New function. |
| (find_pc_sect_symtab): Use find_pc_sect_symtab method. |
| (find_line_symtab): Use expand_symtabs_with_filename method. |
| (output_partial_symbol_filename): New function. |
| (sources_info): Use map_partial_symbol_filenames. |
| (struct search_symbols_data): New type. |
| (search_symbols_file_matches): New function. |
| (search_symbols_name_matches): Likewise. |
| (search_symbols): Use expand_symtabs_matching method. |
| (struct add_name_data): Rename from add_macro_name_data. |
| (add_macro_name): Update. |
| (add_partial_symbol_name): New function. |
| (default_make_symbol_completion_list): Use |
| map_partial_symbol_names. |
| (struct add_partial_symbol_name): New type. |
| (maybe_add_partial_symtab_filename): New function. |
| (make_source_files_completion_list): Use |
| map_partial_symbol_filenames. |
| (expand_line_sal): Use expand_symtabs_with_filename method. |
| * symmisc.c: Include psymtab.h. |
| (print_objfile_statistics): Use print_stats method. |
| (dump_objfile): Use dump method. |
| (dump_psymtab, maintenance_print_psymbols) |
| (maintenance_info_psymtabs, maintenance_check_symtabs) |
| (extend_psymbol_list): Remove. |
| * symfile.h (struct quick_symbol_functions): New struct. |
| (struct sym_fns) <qf>: New field. |
| (sort_pst_symbols): Remove. |
| (increment_reading_symtab): Declare. |
| * symfile.c: Include psymtab.h. |
| (compare_psymbols, sort_pst_symbols): Remove. |
| (psymtab_to_symtab): Remove. |
| (increment_reading_symtab): New function. |
| (symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs |
| method. |
| (set_initial_language): Use find_main_filename. |
| (allocate_psymtab, discard_psymtab, cashier_psymtab): Remove. |
| (free_named_symtabs): Remove unused code. |
| (start_psymtab_common, add_psymbol_to_bcache) |
| (append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list): |
| Remove. |
| * stack.c: Include psymtab.h, symfile.h. |
| (backtrace_command_1): Use find_pc_sect_symtab_via_partial. |
| * source.h (psymtab_to_fullname): Don't declare. |
| * source.c: Include psymtab.h. |
| (select_source_symtab): Use find_last_source_symtab method. |
| (forget_cached_source_info): Use forget_cached_source_info |
| method. |
| (find_and_open_source): No longer static. |
| (psymtab_to_fullname): Remove. |
| * somread.c: Include psymtab.h. |
| (som_sym_fns): Update. |
| * psympriv.h: New file. |
| * psymtab.h: New file. |
| * psymtab.c: New file. |
| * objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove. |
| (ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise. |
| * objfiles.c: Include psymtab.h. |
| (objfile_relocate1): Use relocate method. |
| (objfile_has_partial_symbols): Use has_symbols method. |
| * mipsread.c: Include psymtab.h. |
| (ecoff_sym_fns): Update. |
| * mi/mi-cmd-file.c: Include psymtab.h. |
| (print_partial_file_name): New function. |
| (mi_cmd_file_list_exec_source_files): Use |
| map_partial_symbol_filenames. |
| * mdebugread.c: Include psympriv.h. |
| * machoread.c: Include psympriv.h. |
| (macho_sym_fns): Update. |
| * m2-exp.y (yylex): Use lookup_symtab. |
| * elfread.c: Include psympriv.h. |
| (elf_sym_fns): Update. |
| * dwarf2read.c: Include psympriv.h. |
| * dbxread.c: Include psympriv.h. |
| (aout_sym_fns): Update. |
| * cp-support.c: Include psymtab.h. |
| (read_in_psymtabs): Remove. |
| (make_symbol_overload_list_qualified): Use |
| expand_symtabs_for_function method. |
| * coffread.c: Include psympriv.h. |
| (coff_sym_fns): Update. |
| * blockframe.c: Include psymtab.h. |
| (find_pc_partial_function): Use find_pc_sect_symtab method. |
| * ada-lang.h (ada_update_initial_language): Update. |
| * ada-lang.c: Include psymtab.h. |
| (ada_update_initial_language): Remove 'main_pst' argument. |
| (ada_lookup_partial_symbol): Remove. |
| (struct ada_psym_data): New type. |
| (ada_add_psyms): New function. |
| (ada_add_non_local_symbols): Use map_ada_symtabs method. |
| (struct add_partial_datum): New type. |
| (ada_add_partial_symbol_completions): New function. |
| (ada_make_symbol_completion_list): Use map_partial_symbol_names. |
| (ada_exception_support_info_sniffer): Update. |
| * Makefile.in (SFILES): Add psymtab.c. |
| (COMMON_OBS): Add psymtab.o. |
| (HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h. |
| |
| 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * remote-fileio.c (cygwin_conv_path): Define macro for old cygwin API. |
| |
| 2010-03-10 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| PR C++/11236: |
| * cp-namespace.c (cp_add_using): Deleted. |
| (cp_add_using_directive): Use obstack allocations. |
| Merged the function cp_add_using into this one. |
| Added 'struct obstack *' argument. |
| (cp_scan_for_anonymous_namespaces): Updated. |
| * cp-support.h: Updated. |
| * dwarf2read.c (read_import_statement): Updated. |
| (read_namespace): Updated. |
| |
| 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * windows-nat.c (cygwin_conv_path): Remove old macro. |
| |
| 2010-03-10 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (condition_command): Handle watchpoint conditions. |
| (is_hardware_watchpoint): Add comment. |
| (is_watchpoint): New. |
| (update_watchpoint): Don't reparse the watchpoint's condition |
| unless necessary. |
| (WP_IGNORE): New. |
| (watchpoint_check): Use it. |
| (bpstat_check_watchpoint): Handle it. |
| (bpstat_check_breakpoint_conditions): Evaluate watchpoint local |
| conditions in a frame where it makes sense. |
| (watch_command_1): Store the innermost block of the condition |
| expression. |
| (delete_breakpoint): Delete the watchpoint condition expression. |
| * breakpoint.h (struct bp_location) <cond>: Update comment. |
| (struct breakpoint): New field `cond_exp_valid_block'. |
| |
| 2010-03-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Adjust handling of Ada DIEs after dwarf2_physname patch. |
| * dwarf2read.c (dwarf2_compute_name): Add handling of Ada DIEs. |
| |
| 2010-03-09 Christopher Faylor <me+cygwin@cgf.cx> |
| Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * windows-nat.c (cygwin_conv_path): Redefine to properly convert |
| from/to posix/win32. |
| (windows_make_so): Use non-Cygwin 1.7 specific function. |
| (windows_create_inferior): Make sure that cygallargs points to |
| original args in non Cygwin 1.7. case. |
| |
| 2010-03-09 Michael Snyder <msnyder@vmware.com> |
| |
| * i386-tdep.c (i386_record_lea_modrm_addr): Use extract_signed_int |
| after target_read_memory to get host byte order. |
| (i386_process_record): Ditto. |
| |
| 2010-03-09 Keith Seitz <keiths@redhat.com> |
| |
| Based on work from Daniel Jacobowitz <dan@codesourcery.com> |
| * c-typeprint.c (cp_type_print_method_args): For non-static methods, |
| print out const or volatile qualifiers, too. |
| (c_type_print_args): Add parameters show_artificial and language. |
| Skip artificial parameters when requested. |
| Use the appropriate language printer. |
| (c_type_print_varspec): Tell c_type_print_args to skip artificial |
| parameters and pass language_c. |
| * dwarf2read.c (die_list): New file global. |
| (struct partial_die_info): Update comments for name field. |
| (pdi_needs_namespace): Renamed to ... |
| (die_needs_namespace): ... this. Rewrite. |
| (dwarf2_linkage_name): Remove. |
| (add_partial_symbol): Do not predicate the call to |
| partial_die_full_name based on pdi_needs_namespace. |
| Remove call to cp_check_possible_namespace_symbols and associated |
| outdated comments. |
| (guess_structure_name): Do not inspect child subprogram DIEs. |
| (dwarf2_fullname): Update comments. |
| Use die_needs_namespace to assist in computing the name. |
| (read_func_scope): Use dwarf2_name to get the DIE's name. |
| Use dwarf2_physname to get the "linkage name" of the DIE. |
| (dwarf2_add_member_field): Use dwarf2_physname instead of |
| dwarf2_linkage_name. |
| (read_structure_type): For structs and classes, set TYPE_NAME, too. |
| (determine_class): Remove. |
| (read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages |
| except Ada. |
| (new_symbol): Unconditionally call dwarf2_name. |
| Compute the "linkage name" using dwarf2_physname. |
| Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs. |
| When determining to scan for anonymous C++ namespaces, ignore |
| the linkage name. |
| (dwarf2_physname): New function. |
| (dwarf2_full_name): Move content to new function and call |
| that. |
| (dwarf2_compute_name): "New" function. |
| (_initialize_dwarf2_read): Initialize die_list. |
| * gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable |
| physname. |
| (gnu_v3_print_method_ptr): Use the physname for virtual methods |
| without a demangled name. |
| Print out type information for non-virtual methods. |
| * linespec.c (decode_line_1): Force ANY string using "::" (or |
| "." for java) to use decode_compound, and clean up any stray quoting. |
| If we found a file symtab, re-evaluate whether the remainder is_quoted. |
| (decode_compound): Stop consuming at an open parenthesis. |
| Keep template parameters. |
| Keep any overload information. |
| Keep keywords like "const". |
| Remove paren_pointer. |
| Move is_quoted check from set_flags to here. |
| Remove #if 0 code from 2000. Ten years is long enough. |
| (find_method): Before comparing symbol names, canonicalize the string |
| from the user. |
| If a specific overload is requested, find it. Otherwise throw an error. |
| (find_method_overload_end): New function. |
| (set_flags): Remove. |
| (decode_compound): Assume that parentheses are matched. |
| It's a lot easier. |
| * symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag |
| to cplus_demangle. |
| * linespec.c (decode_line_1): Keep important keywords like |
| "const" and "volatile". |
| * symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove. |
| * typeprint.h (c_type_print_args): Add declaration. |
| * ui-file.c (do_ui_file_obsavestring): New function. |
| (ui_file_obsavestring): New function. |
| * ui-file.h (ui_file_obsavestring): Add declaration. |
| * valops.c (find_overload_match): Resolve the object to |
| a non-pointer type. |
| If the object is a data member, search the object for the member |
| and return with staticp set. |
| Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME. |
| Do not attempt to extract a function name from non-function types. |
| If the extracted function name and the original name are the same, |
| we don't have a C++ method. |
| |
| From Jan Kratochvil <jan.kratochvil@redhat.com>: |
| * dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name. |
| |
| * ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters |
| and arguments from symbol lookups. |
| * ax-gdb.c (gen_expr): Likewise. |
| * cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope, |
| cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type, |
| lookup_possible_namespace_symbol): Likewise. |
| * cp-support.c (read_in_psymtabs): Likewise. |
| * cp-support.h (cp_lookup_symbol_nonlocal): Likewise. |
| * language.h (la_lookup_symbol_nonlocal): Likewise. |
| * scm-valprint.c (scm_inferior_print): Likewise. |
| * solib-darwin.c (darwin_relocate_section_addresses): Likewise. |
| * solib-svr.c (elf_lookup_lib): Likewise. |
| * solib.c (show_auto_solib_add): Likewise. |
| * solist.h (lookup_lib_global, solib_global_lookup): Likewise. |
| * symmisc.c (maintenance_check_symtabs): Likewise. |
| * symtab.c (lookup_symbol_in_language, lookup_symbol_aux, |
| lookup_symbol_aux_local, lookup_symbol_aux_block, |
| lookup_symbol_from_objfile, lookup_symbol_aux_symtabs, |
| lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal, |
| lookup_symbol_static, lookup_symbol_global, symbol_matches_domain, |
| basic_lookup_transparent_type, find_main_psymtab, |
| lookup_block_symbol): Likewise. |
| * symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static, |
| lookup_symbol_global, lookup_symbol_aux_block, |
| lookup_symbol_partial_symbol, lookup_block_symbol, |
| lookup_global_symbol, value_maybe_namespace_elt): Likewise. |
| |
| 2010-03-09 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * python/python-internal.h: Include symtab.h. |
| |
| 2010-03-09 Joel Brobecker <brobecker@adacore.com> |
| Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * p-lang.c (is_pascal_string_type): Remove unneeded parentheses. |
| * p-valprint.c (pascal_val_print): Remove undeed block and fix |
| indentation. |
| |
| 2010-03-08 Tom Tromey <tromey@redhat.com> |
| |
| * breakpoint.c (breakpoint_1): Add "QUIT". |
| |
| 2010-03-08 Daniel Jacobowitz <dan@codesourcery.com> |
| Pedro Alves <pedro@codesourcery.com> |
| |
| * solib.c (solib_find): Replace extension if |
| solib_symbols_extension is set in the target gdbarch. |
| * arm-symbian-tdep.c (arm_symbian_init_abi): Set |
| solib_symbols_extension to "sym". |
| * gdbarch.sh (solib_symbols_extension): New variable. |
| (pstring): New function. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| |
| 2010-03-08 Tom Tromey <tromey@redhat.com> |
| |
| PR cli/9591: |
| * NEWS: Update. |
| * utils.c: Include main.h. |
| (fputs_maybe_filtered): Don't paginate if `batch_flag'. |
| (defaulted_query): Use default answer if `batch_flag'. |
| * main.h (batch_flag): Declare. |
| * main.c (batch_flag): New global. |
| (captured_main): Remove 'batch'. Update. |
| |
| 2010-03-08 Kevin Buettner <kevinb@redhat.com> |
| |
| From Richard Sandiford, Martin M. Hunt, Corinna Vinschen, |
| and Kevin Buettner: |
| |
| * remote-mips.c (rockhopper_ops): New target_ops struct. |
| (MON_ROCKHOPPER): New mips_monitor_type. |
| (read_hex_value): New function. |
| (mips_request): Send 8-byte values with a 'T' packet. Read the |
| packet argument as a string and use read_hex_value to parse it. |
| (mips_exit_debug): Wait for response when using MON_ROCKHOPPER. |
| (rockhopper_open): New function. |
| (mips_wait): Read the PC, FP and SP fields as strings. Use |
| read_hex_value to parse them and mips_set_register to commit them. |
| (mips_set_register): New function. |
| (mips_fetch_registers): Do not cast register value to "unsigned" |
| when reading a MON_ROCKHOPPER 't' packet. Use mips_set_register. |
| (mips_store_registers): Use a 'T' packet to set registers when |
| using MON_ROCKHOPPER. |
| (pmon_end_download): Don't run initEther if using MON_ROCKHOPPER |
| and expect the total to be printed before the entry address. |
| (_initialize_remote_mips): Initialize and add rockhopper_ops. |
| |
| 2010-03-08 Kevin Buettner <kevinb@redhat.com> |
| |
| * remote-mips.c (mips_fetch_word): Add new parameter, `valp'. |
| Change return value to int. Store value fetched in location |
| addressed by `val'. Use function's return value as success |
| or failure indicator. Adjust all callers. |
| |
| 2010-03-08 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * p-lang.c (is_pascal_string_type): Check that TYPE arg is non NULL. |
| |
| 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Hui Zhu <teawater@gmail.com> |
| |
| * record.c (record_open_1): Check tmp_to_stopped_by_watchpoint and |
| tmp_to_stopped_data_address. |
| (record_open): Reset tmp_to_stopped_by_watchpoint and |
| tmp_to_stopped_data_address. |
| * target.c (init_dummy_target): Add to_stopped_by_watchpoint and |
| to_stopped_data_address. |
| |
| 2010-03-08 Hui Zhu <teawater@gmail.com> |
| |
| * i386-tdep.c (i386_process_record): Initialize regnum. |
| |
| 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symfile.c (addr_info_make_relative): New variable sect_name, use it. |
| Do not warn on ".gnu.liblist" and ".gnu.conflict". |
| |
| 2010-03-08 Joel Brobecker <brobecker@adacore.com> |
| |
| Memory error when reading wrong core file. |
| * solib-svr4.c (solib_svr4_r_map): catch and print all exception |
| errors while reading the inferior memory, and return zero if |
| an exception was raised. |
| |
| 2010-03-07 Michael Snyder <msnyder@vmware.com> |
| |
| * record.c (record_restore): Rename tmpu8 to rectype. |
| |
| * i386-tdep.c (i386_record_lea_modrm_addr): Rename local variables |
| tmpu8, tmpi16, tmpi32, tmpulongest to addr8, addr16, addr32, addr64. |
| |
| (i386_record_push): Rename local tmpulongest to addr. |
| |
| (i386_process_record): Rename local tmpulongest to addr. |
| |
| Rename local variables tmpu16, tmpu32, tmpu64 to addr16, addr32, |
| addr64. |
| |
| Rename local variable tmpu8 to opcode8 and regnum. |
| |
| 2010-03-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * remote.c (remote_get_ada_task_ptid): New function. |
| (init_remote_ops): Set remote_ops.to_get_ada_task_ptid. |
| |
| 2010-03-06 Christopher Faylor <me+cygwin@cgf.cx> |
| |
| * windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one |
| block. Define helper macros to reduce ifdefs in code. |
| (get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer |
| size. Call unadorned GetModuleFileNameEx rather than |
| GetModuleFileNameEx*. |
| (windows_make_so): Use __PMAX to denote maximum buffer size and |
| cygwin_buf_t for buffer type. Use GetSystemDirectory{W,A} as |
| appropriate. |
| (get_image_name): Use __PMAX to denote maximum buffer size. |
| (handle_load_dll): Likewise. |
| (windows_pid_to_exec_file): Likewise. |
| (windows_create_inferior): Add many accommodations for older Cygwin and |
| non-Cygwin. |
| (bad_GetModuleFileNameExW): Control inclusion of this function based on |
| __USEWIDE conditional. |
| (bad_GetModuleFileNameExA): Likewise. |
| (_initialize_loadable): Just use real function names without the dyn_ |
| part since they are defined earlier. |
| |
| 2010-03-05 Corinna Vinschen <vinschen@redhat.com> |
| Tom Tromey <tromey@redhat.com> |
| |
| * utils.c (host_char_to_target): Add 'gdbarch' argument. |
| (parse_escape): Likewise. |
| * python/py-utils.c (unicode_to_target_string): Update. |
| (unicode_to_target_python_string): Update. |
| (target_string_to_unicode): Update. |
| * printcmd.c (printf_command): Update. |
| * p-exp.y (yylex): Update. |
| * objc-exp.y (yylex): Update. |
| * mi/mi-parse.c: Include charset.h. |
| (mi_parse_escape): New function. |
| (mi_parse_argv): Use it. |
| * jv-exp.y (yylex): Update. |
| * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New |
| function. |
| (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. |
| * gdbarch.sh (auto_charset, auto_wide_charset): New. |
| * gdbarch.c: Rebuild. |
| * gdbarch.h: Rebuild. |
| * defs.h (parse_escape): Update. |
| * cli/cli-setshow.c: Include arch-utils.h. |
| (do_setshow_command): Update. |
| * cli/cli-cmds.c (echo_command): Update. |
| * charset.h (target_charset, target_wide_charset): Update. |
| * charset.c: Include arch-utils.h. |
| (target_charset_name): Default to "auto". |
| (target_wide_charset_name): Likewise. |
| (show_target_charset_name): Handle "auto". |
| (show_target_wide_charset_name): Likewise. |
| (be_le_arch): New global. |
| (set_be_le_names): Add 'gdbarch' argument. |
| (validate): Likewise. Don't call set_be_le_names. |
| (set_charset_sfunc, set_host_charset_sfunc) |
| (set_target_charset_sfunc, set_target_wide_charset_sfunc): |
| Update. |
| (target_charset): Add 'gdbarch' argument. |
| (target_wide_charset): Likewise. Remove 'byte_order' argument. |
| (auto_target_charset_name): New global. |
| (default_auto_charset, default_auto_wide_charset): New functions. |
| (_initialize_charset): Set auto_target_charset_name. Allow "auto" |
| for target charsets. Copy result of nl_langinfo. Use GetACP if |
| USE_WIN32API. |
| * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, |
| remove 'byte_order' argument. Update. |
| (classify_type): Likewise. |
| (c_emit_char): Update. |
| (c_printchar): Update. |
| (c_printstr): Update. |
| (c_get_string): Update. |
| (evaluate_subexp_c): Update. |
| * arch-utils.h (default_auto_charset, default_auto_wide_charset): |
| Declare. |
| * python/python.c (gdbpy_target_charset): New function. |
| (gdbpy_target_wide_charset): Likewise. |
| (GdbMethods): Update. |
| * NEWS: Update. |
| |
| 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * symfile.c (build_section_addr_info_from_objfile): Do not mask |
| off high address bits. |
| |
| 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * python/py-lazy-string.c (gdbpy_extract_lazy_string): Extract |
| address as UnsignedLongLong, not LongLong. |
| |
| 2010-03-05 Kevin Buettner <kevinb@redhat.com> |
| Pedro Alves <pedro@codesourcery.com> |
| |
| * remote-mips.c (gdbthread.h): Include. |
| (remote_mips_ptid): Declare. |
| (mips_error): Only mourn the inferior when inferior_ptid is non-null. |
| (common_open): Set inferior_ptid, add it as an inferior, and |
| as a thread too. Delete FIXME comment regarding start_remote(). |
| (mips_close): Invoke generic_mourn_inferior(). |
| (mips_kill): Make sure that target_mourn_inferior is invoked. |
| (mips_mourn_inferior): Don't invoke generic_mourn_inferior, as |
| it's now invoked from mips_close(). |
| (mips_load): Don't null out inferior_ptid. Don't call |
| clear_symtab_users(). |
| (mips_thread_alive, mips_pid_to_str): New functions. |
| (_initialize_remote_mips): Initialize remote_mips_ptid. Initialize |
| to_thread_alive and to_pid_to_str operations. |
| |
| 2010-03-04 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (skip_one_die) <DW_FORM_ref_addr>: Use offset size |
| in DWARF 3 and later. |
| (read_attribute_value) <DW_FORM_ref_addr>: Likewise. |
| |
| 2010-03-04 Keith Seitz <keiths@redhat.com> |
| |
| * linespec.c (decode_line_1): Update comments for is_quote_enclosed. |
| If the filename portion of the linespec was quoted, recheck the |
| remainder for additional quoting. |
| (locate_first_half): Skip over completer chars, too. |
| |
| 2010-03-04 Tom Tromey <tromey@redhat.com> |
| |
| * printcmd.c (printf_command): Pass dummy argument to |
| printf_filtered. |
| |
| 2010-03-04 Doug Evans <dje@google.com> |
| |
| * arm-tdep.c (arm_make_stub_cache): Delete unused locals reg, |
| unwound_fp. |
| |
| * arm-tdep.c (arm_stub_unwind_sniffer): Add comment. |
| |
| 2010-03-04 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (update_watchpoint): Create a sentinel location if |
| the software watchpoint isn't watching any memory. |
| (breakpoint_address_bits): Skip dummy software watchpoint locations. |
| |
| 2010-03-04 Pedro Alves <pedro@codesourcery.com> |
| |
| * utils.c (fputs_maybe_filtered): Check if there's already a top |
| level interpreter before dereferencing it. If there isn't one, |
| don't paginate either. |
| |
| 2010-03-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> |
| |
| * arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get |
| the state right when single stepping. |
| (arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions. |
| Get the next PC along with the instruction state. |
| (thumb_get_next_pc): Remove. |
| (arm_get_next_pc): Modified to use arm_get_next_pc_raw. |
| |
| 2010-03-04 Hui Zhu <teawater@gmail.com> |
| |
| * i386-tdep.c (i386_process_record): Change "addr" to "tmpu64". |
| |
| 2010-03-03 Pedro Alves <pedro@codesourcery.com> |
| |
| * utils.c (fputs_maybe_filtered): Always disable pagination if the |
| top level interpreter is MI. |
| |
| 2010-03-03 Stan Shebs <stan@codesourcery.com> |
| |
| * remote.c (remote_download_tracepoint): Iterate over locations. |
| * tracepoint.c (validate_actionline): Ditto. |
| (encode_actions): Add location argument. |
| (trace_dump_command): Check all locations to see if stepping |
| frame. |
| |
| 2010-03-03 H.J. Lu <hongjiu.lu@intel.com> |
| Eli Zaretskii <eliz@gnu.org> |
| |
| * NEWS: Add X86 general purpose registers section. |
| |
| 2010-03-03 Tom Tromey <tromey@redhat.com> |
| |
| PR mi/11098: |
| * varobj.c (install_new_value): Handle case where new print_value |
| is NULL. |
| |
| 2010-03-03 Dainis Jonitis <jonitis@gmail.com> |
| |
| PR gdb/11345: |
| * printcmd.c (printf_command): Print end of format string using |
| printf_filtered. |
| |
| 2010-03-02 Tom Tromey <tromey@redhat.com> |
| |
| * mi/mi-cmd-break.c (mi_read_next_line): Add missing 'void'. |
| * defs.h (read_command_lines_1): Add missing 'void'. |
| * cli/cli-script.c (recurse_read_control_structure): Add missing |
| 'void'. |
| (read_next_line): Likewise. |
| (read_command_lines_1): Likewise. |
| |
| 2010-03-02 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * spu-tdep.c (spu_analyze_prologue): Track instruction to |
| store backchain as part of prologue. |
| |
| 2010-03-02 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * progspace.c (update_address_spaces): Update inferior address spaces |
| also. |
| |
| 2010-03-02 Doug Evans <dje@google.com> |
| |
| * dwarf2read.c (add_partial_subprogram): Add missing baseaddr to |
| lowpc,highpc args to addrmap_set_empty. |
| |
| 2010-03-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * amd64-tdep.c (amd64_byte_names): New. |
| (amd64_word_names): Likewise. |
| (amd64_dword_names): Likewise. |
| (amd64_pseudo_register_name): Likewise. |
| (amd64_pseudo_register_read): Likewise. |
| (amd64_pseudo_register_write): Likewise. |
| (amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs |
| and num_mmx_regs. Call set_gdbarch_pseudo_register_read, |
| set_gdbarch_pseudo_register_write and |
| set_tdesc_pseudo_register_name. Don't call |
| set_gdbarch_num_pseudo_regs. Don't set mm0_regnum. |
| |
| * i386-tdep.c (i386_num_mmx_regs): Removed. |
| (i386_num_pseudo_regs): Likewise. |
| (i386_byte_names): New. |
| (i386_word_names): Likewise. |
| (i386_byte_regnum_p): Likewise. |
| (i386_word_regnum_p): Likewise. |
| (i386_mmx_regnum_p): Updated. |
| (i386_pseudo_register_name): Make it global. Handle byte and |
| word pseudo-registers. |
| (i386_pseudo_register_read): Likewise. |
| (i386_pseudo_register_write): Likewise. |
| (i386_pseudo_register_type): Handle byte, word and dword |
| pseudo-registers |
| (i386_register_reggroup_p): Don't include pseudo |
| registers, except for MXX, in any register groups. Don't |
| include pseudo byte, word, dword registers in general_reggroup. |
| (i386_gdbarch_init): Set num_byte_regs, num_word_regs, |
| num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX |
| pseudo-registers after word pseudo-registers. Call |
| set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi. |
| |
| * i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs, |
| al_regnum, num_word_regs, ax_regnum, num_dword_regs and |
| eax_regnum. |
| (i386_byte_regnum_p): New. |
| (i386_word_regnum_p): Likewise. |
| (i386_dword_regnum_p): Likewise. |
| (i386_pseudo_register_name): Likewise. |
| (i386_pseudo_register_read): Likewise. |
| (i386_pseudo_register_write): Likewise. |
| |
| 2010-03-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * target-descriptions.c (tdesc_type): Remove |
| TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR. |
| (tdesc_predefined_types): Likewise. |
| (tdesc_gdb_type): Likewise. Pass NULL to append_flags_type_flag |
| if flag name is empty. |
| (maint_print_c_tdesc_cmd): Handle TDESC_TYPE_FLAGS. |
| |
| * features/i386/32bit-core.xml: Define i386_eflags. |
| * features/i386/64bit-core.xml: Likewise. |
| |
| * features/i386/32bit-sse.xml: Define i386_mxcsr. |
| * features/i386/64bit-sse.xml: Likewise. |
| |
| * features/i386/amd64-linux.c: Regenerated. |
| * features/i386/amd64.c: Likewise. |
| * features/i386/i386-linux.c: Likewise. |
| * features/i386/i386.c: Likewise. |
| |
| 2010-03-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdbtypes.c (append_composite_type_field_raw): New. |
| (append_composite_type_field_aligned): Use the new function. |
| * gdbtypes.h (append_composite_type_field_raw): Declare. |
| * target-descriptions.c (struct tdesc_type_field): Add start and end. |
| (struct tdesc_type_flag): New type. |
| (struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to |
| kind. Add size to u.u. Add u.f for flags. |
| (tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS. |
| (tdesc_free_type): Likewise. |
| (tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New. |
| (tdesc_add_field): Handle TDESC_TYPE_STRUCT. |
| (tdesc_add_bitfield, tdesc_add_flag): New. |
| * target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size) |
| (tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare. |
| * xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to |
| current_type. Add current_type_size and current_type_is_flags. |
| (tdesc_start_union): Clear the new fields. |
| (tdesc_start_struct, tdesc_start_flags): New. |
| (tdesc_start_field): Handle struct fields, including bitfields. |
| (field_attributes): Make type optional. Add start and end. |
| (union_children): Rename to struct_union_children. |
| (union_attributes): Rename to struct_union_attributes. Add optional |
| size. |
| (flags_attributes): New. |
| (feature_children): Add struct and flags. |
| * features/gdb-target.dtd: Add flags and struct to features. |
| Make field type optional. Add field start and end. |
| |
| 2010-03-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New. |
| (amd64_linux_read_description): Likewise. |
| (_initialize_amd64_linux_nat): Set to_read_description to |
| amd64_linux_read_description. |
| |
| * amd64-linux-tdep.c: Include "features/i386/amd64-linux.c". |
| (amd64_linux_register_name): Removed. |
| (amd64_linux_register_type): Likewise. |
| (amd64_linux_core_read_description): New. |
| (amd64_linux_init_abi): Set target description to |
| tdesc_amd64_linux if needed. Support orig_rax in target |
| description. Don't call set_gdbarch_register_name nor |
| set_gdbarch_register_type. Call |
| set_gdbarch_core_read_description. |
| (_initialize_amd64_linux_tdep): Call |
| initialize_tdesc_amd64_linux. |
| |
| * amd64-linux-tdep.h (tdesc_amd64_linux): New. |
| |
| * amd64-tdep.c: Include "features/i386/amd64.c". |
| (amd64_register_names): Removed. |
| (amd64_register_name): Likewise. |
| (amd64_register_type): Likewise. |
| (amd64_init_abi): Set num_core_regs and register_names. Set |
| target description to tdesc_amd64 if needed. Don't call |
| set_gdbarch_register_name nor set_gdbarch_register_type. |
| (_initialize_amd64_tdep): New. |
| |
| * i386-linux-nat.c (i386_linux_read_description): New. |
| (_initialize_i386_linux_nat): Set to_read_description to |
| i386_linux_read_description. |
| |
| * i386-linux-tdep.c: Include "features/i386/i386-linux.c". |
| (i386_linux_register_name): Removed. |
| (i386_linux_core_read_description): New. |
| (i386_linux_read_description): Likewise. |
| (i386_linux_init_abi): Don't call set_gdbarch_register_name. |
| Set target description to tdesc_i386_linux if needed. Support |
| orig_eax. Set register_reggroup_p. Call |
| set_gdbarch_core_read_description. |
| (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux. |
| |
| * i386-linux-tdep.h (tdesc_i386_linux): New. |
| |
| * i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS |
| with I387_NUM_REGS. |
| |
| * i386-tdep.c: Include "features/i386/i386.c". |
| (i386_register_names): Make it const. |
| (i386_mmx_names): Likewise. |
| (i386_num_register_names): Removed. |
| (i386_register_name): Likewise. |
| (i386_eflags_type): Likewise. |
| (i386_mxcsr_type): Likewise. |
| (i386_sse_type): Likewise. |
| (i386_register_type): Likewise. |
| (i387_ext_type): Call tdesc_find_type instead of arch_float_type. |
| (i386_pseudo_register_name): New. |
| (i386_pseudo_register_type): Likewise. |
| (i386_mmx_type): Make it static. |
| (i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with |
| I387_NUM_REGS. Set num_core_regs and register_names. Don't |
| call set_gdbarch_register_name nor set_gdbarch_register_type. |
| Set register_reggroup_p. Set target description to tdesc_i386 |
| if needed. Call set_tdesc_pseudo_register_type, |
| set_tdesc_pseudo_register_name and tdesc_use_registers. |
| (_initialize_i386_tdep): Call initialize_tdesc_i386. |
| initialize_tdesc_x86_64. |
| |
| * i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type, |
| i386_mxcsr_type and i386_sse_type. Add num_core_regs, |
| register_names, tdesc and register_reggroup_p. |
| (I386_NUM_FREGS): Removed. |
| (i386_eflags_type): Likewise. |
| (i386_mxcsr_type): Likewise. |
| (i386_mmx_type): Likewise. |
| (i386_sse_type): Likewise. |
| (i386_register_name): Likewise. |
| (i386_regnum): Add I386_MXCSR_REGNUM. |
| (I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM. |
| |
| * i387-tdep.h (I387_NUM_REGS): New. |
| |
| * regformats/i386/i386-linux.dat: Generated. |
| * regformats/i386/i386.dat: Likewise. |
| * regformats/i386/amd64-linux.dat: Likewise. |
| * regformats/i386/amd64.dat: Likewise. |
| |
| * regformats/reg-i386-linux.dat: Removed. |
| * regformats/reg-i386.dat: Likewise. |
| * regformats/reg-x86-64-linux.dat: Likewise. |
| * regformats/reg-x86-64.dat: Likewise. |
| |
| 2010-03-01 Corinna Vinschen <vinschen@redhat.com> |
| |
| * remote-fileio.c (remote_fileio_func_rename): Use Cygwin 1.7 |
| cygwin_conv_path API rather than the deprecated |
| cygwin_conv_to_full_posix_path. |
| * windows-nat.c: |
| (GetModuleFileNameExA): Undefine for Cygwin. |
| (GetModuleFileNameExW): Define for Cygwin. |
| (get_module_name): Change size of pathbuf to PATH_MAX for Cygwin. |
| Call GetModuleFileNameExW and convert path to POSIX using |
| cygwin_conv_path. |
| (windows_make_so): Always define p. Drop unused variable m. |
| Don't use Win32 functions to check file existance, rather use |
| access on Cygwin. Fetch system directory using GetSystemDirectoryW. |
| Use canonicalize_file_name to get full path. |
| (get_image_name): Use wcstombs, rather than WideCharToMultiByte |
| to convert Unicode pathname to multibyte on Cygwin. Otherwise, |
| use correct target buffer size in call to WideCharToMultiByte. |
| (handle_load_dll): Change size of dll_buf to PATH_MAX for Cygwin. |
| (windows_pid_to_exec_file): Change size of path to PATH_MAX for Cygwin. |
| (windows_create_inferior): Convert all paths and arguments to wchar_t |
| and use CreateProcessW on Cygwin. |
| (_initialize_windows_nat): Disable DOS-style path warning on Cygwin. |
| (bad_GetModuleFileNameExA): Undefine for Cygwin. |
| (bad_GetModuleFileNameExW): Define for Cygwin. |
| (_initialize_loadable): Load GetModuleFileNameExW into |
| dyn_GetModuleFileNameExW on Cygwin. Don't load ANSI function on Cygwin. |
| |
| 2010-02-28 Phil Muldoon <pmuldoon@redhat.com> |
| |
| PR python/11036 |
| * python/py-frame.c (frapy_read_var): Add block argument and logic |
| to cope with user provided blocks. |
| |
| 2010-02-28 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * infcall.c (call_function_by_hand): Remove gdb_assert on sp and old_sp. |
| New comment. |
| |
| 2010-02-28 Corinna Vinschen <vinschen@redhat.com> |
| |
| * Makefile.in (SUBDIR_MI_OBS): Move mi-common.o from here... |
| (COMMON_OBS): ... to here since it's used unconditionally. |
| (SUBDIR_MI_SRCS): Move mi/mi-common.c from here... |
| (SFILES): To here. |
| |
| 2010-02-26 David Daney <ddaney@caviumnetworks.com> |
| |
| * mips-linux-tdep.c: Update struct sigframe comments. |
| (SIGFRAME_CODE_OFFSET): Delete macro. |
| (mips_linux_o32_sigframe_init): Calculate sigcontext_base using |
| this_frame's sp. |
| (mips_linux_n32n64_sigframe_init): Same. |
| |
| 2010-02-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * remote-mips.c (mips_load): Don't use pseudo-register when |
| invalidating regcache. |
| |
| 2010-02-26 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-tdep.c (thumb_get_next_pc): Correct conditional branch opcode. |
| |
| 2010-02-26 Pedro Alves <pedro@codesourcery.com> |
| |
| * NEWS: Add "New targets" section, and mention ARM Symbian |
| support. |
| |
| 2010-02-26 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * dwarf2loc.c (struct piece_closure): Remove ARCH member, |
| add ADDR_SIZE member. |
| (allocate_piece_closure): Update. |
| (copy_pieced_value_closure): Likewise. |
| (dwarf2_evaluate_loc_desc): Likewise. |
| (read_pieced_value): Use DWARF address size instead of |
| GDB's gdbarch_addr_bit as size of values on the DWARF stack. |
| |
| 2010-02-26 Phil Muldoon <pmuldoon@redhat.com> |
| Tom Tromey <tromey@redhat.com> |
| |
| * python/py-type.c (typy_lookup_typename): Add in block argument. |
| If provided restrict lookup to specified blocks. |
| (gdbpy_lookup_type): Likewise. |
| (typy_lookup_type): Likewise. |
| |
| 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Symbian config |
| |
| gdb/ |
| * arm-symbian-tdep.c: New. |
| * configure.tgt (arm*-*-symbianelf*): New target. |
| (*-*-symbianelf*): New OS. |
| * osabi.c (gdb_osabi_names): Add Symbian. |
| * defs.h (gdb_osabi): Add GDB_OSABI_SYMBIAN. |
| * Makefile.in (ALL_TARGET_OBJS): Add arm-symbian-tdep.o. |
| (ALLDEPFILES): Add arm-symbian-tdep.c. |
| |
| 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * symfile.c (find_lowest_section): Include SEC_ALLOC sections. |
| |
| 2010-02-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * mi/mi-main.c (mi_cmd_execute): Fix typo. |
| |
| 2010-02-24 Phil Muldoon <pmuldoon@redhat.com> |
| Tom Tromey <tromey@redhat.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * python/python.c (_initialize_python): Call |
| gdbpy_initialize_symtabs, gdbpy_initialize_symbols and |
| gdbpy_initialize_blocks. |
| * python/python-internal.h: Declare struct symbol, block and |
| symtab_and_line. Declare block_object_type and |
| symbol_object_type |
| (gdbpy_lookup_symbol gdbpy_block_for_pc) |
| (symtab_and_line_to_sal_object, symtab_to_symtab_object) |
| (symbol_to_symbol_object, block_to_block_object) |
| (gdbpy_initialize_symtabs,gdbpy_initialize_symbols) |
| (gdbpy_initialize_blocks ): Declare. |
| * python/py-frame.c (frapy_block, frapy_function, frapy_find_sal) |
| (frapy_select): Add methods. |
| (frapy_read_var): Add symbol branch. |
| * Makefile.in (SUBDIR_PYTHON_OBS): Add py-symbol, py-symtab, |
| py-block. |
| (SUBDIR_PYTHON_SRCS): Likewise. |
| (py-symbol.o): New rule. |
| (py-symtab.o): Likewise. |
| (py-block.o): Likewise. |
| * python/py-symbol.c: New file. |
| * python/py-symtab.c: Likewise. |
| * python/py-block.c: Likewise. |
| |
| 2010-02-24 Pedro Alves <pedro@codesourcery.com> |
| |
| PR gdb/11321 |
| |
| * inferior.h (prepare_for_detach): Declare. |
| (struct inferior) <detaching>: New field. |
| * infrun.c (prepare_for_detach): New. |
| (handle_inferior_event) <random signal>: Don't stop if detaching. |
| * target.c (target_detach): Call prepare_for_detach. |
| |
| 2010-02-24 Pedro Alves <pedro@codesourcery.com> |
| |
| Per-process displaced stepping queue. |
| |
| * infrun.c (displaced_step_ptid, displaced_step_request_queue) |
| (displaced_step_gdbarch, displaced_step_closure, |
| (displaced_step_original, displaced_step_copy): Move globals to |
| this... |
| (struct displaced_step_inferior_state): ... new structure. |
| (displaced_step_inferior_states): New global. |
| (get_displaced_stepping_state, add_displaced_stepping_state) |
| (remove_displaced_stepping_state, infrun_inferior_exit): New |
| functions. |
| (displaced_step_clear): Add displaced_step_inferior_state |
| parameter, and adjust to handle it. |
| (displaced_step_clear_cleanup): Parameter is now a |
| displaced_step_inferior_state. Adjust. |
| (displaced_step_prepare): Adjust. |
| (displaced_step_fixup, displaced_step_fixup) |
| (infrun_thread_ptid_changed, resume): Adjust. |
| (init_wait_for_inferior): Don't call displaced_step_clear. |
| (infrun_thread_stop_requested): Rewrite. |
| (_initialize_infrun): Install infrun_inferior_exit as |
| inferior_exit observer. |
| |
| 2010-02-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * inferior.h (ptid_match): Declare. |
| * infrun.c (ptid_match): New. |
| * remote.c (queued_stop_reply): Rewrite and use ptid_match. |
| (handle_notification): Add debug output. |
| * linux-nat.c (ptid_match): Delete. |
| |
| 2010-02-24 David S. Miller <davem@davemloft.net> |
| |
| * gdb_ptrace.h (PT_SYSCALL): If PTRACE_SYSCALL is available, use it. |
| * syscalls/sparc-linux.xml: New. |
| * syscalls/sparc64-linux.xml: New. |
| * Makefile.in (XML_SYSCALL_FILES): Add new syscall XML files. |
| * sparc-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC32): Define. |
| (sparc32_linux_get_syscall_number): New function. |
| (sparc32_linux_init_abi): Set syscall XML file name and hook up |
| syscall number fetcher. |
| * sparc64-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC64): Define. |
| (sparc64_linux_get_syscall_number): New function. |
| (sparc64_linux_init_abi): Set syscall XML file name and hook up |
| syscall number fetcher. |
| |
| 2010-02-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Multiexec MI |
| |
| * breakpoint.c (clear_syscall_counts): Take struct inferior*. |
| * inferior.c (add_inferior_silent): Notify inferior_added |
| observer. |
| (delete_inferior_1): Notify inferior_removed observer. |
| (exit_inferior_1): Pass inferior, not pid, to observer. |
| (inferior_appeared): Likewise. |
| (add_inferior_with_spaces): New. |
| (add_inferior_command): Use the above. |
| * inferior.h (delete_inferior_1, add_inferior_with_spaces): |
| Declare. |
| |
| * inflow.c (inflow_inferior_exit): Likewise. |
| * jit.c (jit_inferior_exit_hook): Likewise. |
| |
| * mi/mi-cmds.c (mi_cmds): Register add-inferior and |
| remove-inferior. |
| * mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New. |
| * mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New. |
| (report_initial_inferior): New. |
| (mi_inferior_removed): Register the above. Make sure |
| inferior_added observer is called on the first inferior. |
| (mi_new_thread, mi_thread_exit): Thread group is now identified by |
| inferior number, not pid. |
| (mi_solib_loaded, mi_solib_unloaded): Report which inferiors are |
| affected. |
| * mi/mi-main.c (current_context): New. |
| (proceed_thread_callback): Use typed closure. |
| Proceed everything if pid is 0. Most implementation split into |
| (proceed_thread): ... this. |
| (run_one_inferior): New. |
| (mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run): |
| Adjust for multiexec behaviour. |
| (mi_cmd_add_inferior, mi_cmd_remove_inferior): New. |
| (mi_cmd_execute): Handle the 'thread-group' option here. |
| Do some extra checks. |
| * mi-parse.c (mi_parse): Handle the --all and --thread-group |
| options. |
| * mi-parse.h (struct mi_parse): New fields all and thread_group. |
| |
| 2010-02-24 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Make -exec-run a proper MI commands. |
| |
| * mi/mi-cmds.h (mi_cmd_exec_run): Declare. |
| * mi/mi-cmds.c (mi_cmds): Adjust. |
| * mi/mi-main.c (mi_cmd_exec_run): New. |
| |
| 2010-02-24 Pedro Alves <pedro@codesourcery.com> |
| Stan Shebs <stan@codesourcery.com> |
| |
| * tracepoint.h (set_traceframe_number) |
| (cleanup_restore_current_traceframe): Declare. |
| * tracepoint.c (set_traceframe_number): New. |
| (struct current_traceframe_cleanup): New. |
| (do_restore_current_traceframe_cleanup) |
| (restore_current_traceframe_cleanup_dtor) |
| (make_cleanup_restore_current_traceframe): New. |
| * infrun.c: Include tracepoint.h. |
| (fetch_inferior_event): Switch out and in of tfind mode. |
| |
| 2010-02-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (breakpoint_init_inferior): Also delete |
| bp_shlib_event breakpoints. |
| * solib-frv.c (enable_break): Remove call to |
| remove_solib_event_breakpoints. |
| * solib-svr4.c (enable_break): Ditto. |
| * solib-darwin.c (darwin_solib_create_inferior_hook): Ditto. |
| * solib-pa64.c (pa64_solib_create_inferior_hook): Ditto. |
| * solib-som.c (som_solib_create_inferior_hook): Ditto. |
| * solib-spu.c (spu_enable_break): Ditto. |
| |
| 2010-02-23 Harald Koenig <H.Koenig@science-computing.de> |
| |
| * c-exp.y (token_and_value): s/union YYSTYPE/YYSTYPE. |
| |
| 2010-02-23 Harald Koenig <H.Koenig@science-computing.de> |
| |
| * varobj.c (varobj_update): Avoid non-constants in initializers. |
| |
| 2010-02-23 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2loc.c (read_pieced_value) <DWARF_VALUE_STACK>: Correctly |
| handle big-endian values. |
| (dwarf2_evaluate_loc_desc) <DWARF_VALUE_STACK>: Likewise. |
| |
| 2010-02-22 Pedro Alves <pedro@codesourcery.com> |
| |
| PR9605 |
| |
| gdb/ |
| * breakpoint.c (insert_bp_location): If inserting the read |
| watchpoint failed, fallback to an access watchpoint. |
| (bpstat_check_watchpoint): Stop for read watchpoint triggers even |
| if the value changed, if not watching the same memory for writes. |
| (watchpoint_locations_match): Add comment. |
| (update_global_location_list): Copy the location's watchpoint type. |
| * i386-nat.c (i386_length_and_rw_bits): It's an internal error to |
| handle read watchpoints here. |
| (i386_insert_watchpoint): Read watchpoints aren't supported. |
| * remote.c (remote_insert_watchpoint): Return 1 for unsupported |
| packets. |
| * target.h (target_insert_watchpoint): Update description. |
| |
| 2010-02-19 Tom Tromey <tromey@redhat.com> |
| |
| * p-typeprint.c (pascal_type_print_varspec_prefix): Update. |
| * m2-typeprint.c (m2_print_type): Update. |
| * gdbtypes.c (recursive_dump_type): Update. |
| (copy_type_recursive): Update. |
| * c-typeprint.c (c_type_print_varspec_prefix): Update. |
| (c_type_print_base): Update. |
| * gdbtypes.h (TYPE_CODE_TEMPLATE, TYPE_CODE_TEMPLATE_ARG): |
| Remove. |
| (struct cplus_struct_type) <ntemplate_args>: Remove. |
| <struct template_arg>: Remove. |
| <is_dynamic>: Move earlier. |
| (TYPE_TEMPLATE_ARGS): Remove. |
| (TYPE_NTEMPLATE_ARGS): Remove. |
| (TYPE_TEMPLATE_ARG): Remove. |
| |
| 2010-02-19 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/8693, PR c++/9496: |
| * cp-namespace.c (cp_lookup_nested_type): Handle TYPE_CODE_UNION. |
| * c-exp.y (lex_one_token): Rename from yylex. Don't call |
| write_dollar_variable. Don't try to classify NAME tokens. |
| (token_and_value): New type. |
| (token_fifo, popping, name_obstack): New globals. |
| (classify_name): New function. |
| (classify_inner_name): Likewise. |
| (yylex): Likewise. |
| (VARIABLE): Now has type sval. |
| (exp : VARIABLE): Call write_dollar_variable. |
| (qualified_name): Use TYPENAME, not typebase. Add production for |
| multiple "::" instances. |
| (variable): Use name_not_typename. |
| (qualified_type): Remove. |
| (typebase): Update. |
| |
| 2010-02-19 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symfile.c (addr_info_make_relative): Extend comment. Move SECT to |
| a more inner block. Initialize ADDR by LOWER_OFFSET only if it was |
| found by bfd_get_section_by_name. |
| * symfile.h (struct section_addr_info) <sectindex>: New comment. |
| |
| 2010-02-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Add new "[...] since 7.1" section. Rename the "[...] since |
| 7.0 section" into "Changes in 7.1". |
| |
| 2010-02-19 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB 7.1 branch created (branch timestamp: 2010-02-18 20:00 UTC) |
| * version.in: Bump version to 7.1.50.20100219-cvs. |
| |
| 2010-02-18 Harald Koenig <H.Koenig@science-computing.de> |
| |
| * mi/mi-main.c (mi_cmd_exec_jump): Drop unneeded `return'. |
| * symfile.c (symfile_map_offsets_to_segments): Fix assertion. |
| |
| 2010-02-17 Tom Tromey <tromey@redhat.com> |
| |
| * NEWS: Add Python API Improvements section. |
| |
| 2010-02-18 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * NEWS: Correct typo. |
| |
| 2010-02-17 Tom Tromey <tromey@redhat.com> |
| |
| * objfiles.c (gdb_bfd_ref): Handle abfd==NULL. |
| |
| 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symfile.c (build_section_addr_info_from_objfile): Include sections |
| only if they are SEC_ALLOC or SEC_LOAD. |
| |
| 2010-02-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR shlibs/11293 |
| * solib-svr4.c (enable_break): Check size of CORE_ADDR instead |
| of ULONGEST for address size. |
| |
| 2010-02-17 Tom Tromey <tromey@redhat.com> |
| |
| * NEWS: Add C++ improvements section. |
| |
| 2010-02-17 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * python/python-internal.h [!WITH_THREAD] (PyGILState_Release, |
| PyThreadState_Swap): Avoid "statement with no effect" warning. |
| |
| 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (enable_break <target_auxv_search>): New variable |
| addr_bit. Adjust LOAD_ADDR sign for cross-arch inferiors. |
| |
| 2010-02-17 Tristan Gingold <gingold@adacore.com> |
| Petr HluzÃn <petr.hluzin@gmail.com> |
| |
| * avr-tdep.c (avr_scan_prologue): Convert an if statement to a |
| gdb_assert. Fix info->size for SIG prologue. |
| |
| 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * infcmd.c (show_inferior_tty_command): Check for NULL. |
| Correct output message. |
| |
| 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * linespec.c (decode_line_1): Handle FILE:FUNCTION even if |
| FUNCTION contains parentheses. Improve removal of a trailing |
| single quote. |
| |
| 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gcore.c (do_bfd_delete_cleanup): New function. |
| (gcore_command): Use it. Discard the cleanup after success. |
| (gcore_copy_callback): Delete dead code. |
| |
| 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * symfile.c (addr_info_make_relative): Always use |
| find_lowest_section. |
| |
| 2010-02-16 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| * NEWS: Added entry for namespace fixes. |
| |
| 2010-02-15 Tom Tromey <tromey@redhat.com> |
| |
| * dwarf2read.c (guess_structure_name): Allocate name on the |
| objfile obstack. |
| |
| 2010-02-15 Tom Tromey <tromey@redhat.com> |
| |
| * c-typeprint.c (c_type_print_base): Reverse order of test. |
| |
| 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (LM_ADDR_CHECK): New variable minpagesize. Optionally |
| initialize it from ELF BFD. Extend the prelink condition by it. |
| |
| 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * defs.h (parse_pid_to_attach): New. |
| * utils.c (parse_pid_to_attach): New. |
| * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid. |
| * gnu-nat.c (gnu_attach): Likewise. |
| * nto-procfs.c (procfs_attach): Likewise. |
| * procfs.c (procfs_attach): Likewise. |
| * windows-nat.c (windows_attach): Likewise. |
| * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy. |
| * inf-ttrace.c (inf_ttrace_attach): Likewise. |
| * remote.c (extended_remote_attach_1): Likewise. New comment on getpid |
| check. |
| |
| 2010-02-14 Masaki Muranaka <monaka@monami-software.com> |
| |
| * MAINTAINERS: Add myself for write after approval privileges. |
| |
| 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c: (LM_ADDR_CHECK): Move variable align to a more inner |
| block. |
| |
| 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c: (LM_ADDR_CHECK): Print successful prelink adjustment |
| only if INFO_VERBOSE. |
| |
| 2010-02-12 Tomas Holmberg <th@virtutech.com> |
| |
| * mi/mi-main.c: Added the --reverse flag to the following MI |
| commands: exec-continue, exec-finish, exec-next, exec-step, |
| exec-next-instruction, exec-step-instruction. This is to |
| support reverse execution over the MI interface to gdb. |
| |
| 2010-02-12 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (_initialize_tracepoint): Specify that the address |
| range of `tfind outsize' is exclusive, and that the address range |
| of `tfind range' is inclusive, in the commands' help strings. |
| |
| 2010-02-12 Joel Brobecker <brobecker@adacore.com> |
| |
| Spurious "dll not found" error messages on x64-windows. |
| * windows-nat.c: Add include of complaints.h. |
| (handle_unload_dll): Change dll-not-found error into a complaint. |
| |
| 2010-02-12 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (allocate_bp_location): Use bp_loc_other for |
| bp_tracepoint and bp_fast_tracepoint, not |
| bp_loc_software_breakpoint. |
| (update_global_location_list): Tracepoints are never duplicates of |
| anything. |
| |
| 2010-02-12 Pedro Alves <pedro@codesourcery.com> |
| |
| * breakpoint.c (break_command_really): Change return type to int. |
| Return false if no breakpoint was created, true otherwise. |
| (trace_command): Don't set the tracepoint count if no tracepoint |
| was created. |
| (ftrace_command): Ditto. |
| (create_tracepoint_from_upload): Bail out if the tracepoint wasn't |
| created in the breakpoints table. |
| |
| 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * solib-svr4.c (LM_ADDR_CHECK): New comment on PPC-aware condition. |
| |
| 2010-02-11 Pedro Alves <pedro@codesourcery.com> |
| |
| * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out if |
| the offset value isn't of integral type. |
| |
| 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * breakpoint.c (delete_breakpoint) <bpt->related_breakpoint != NULL>: |
| New. |
| |
| 2010-02-11 Pedro Alves <pedro@codesourcery.com> |
| |
| * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out on |
| non-subscriptable types. |
| * valarith.c (binop_types_user_defined_p): New, abstracted out |
| from ... |
| (binop_user_defined_p): ... this. |
| * value.h (binop_types_user_defined_p): Declare. |
| |
| 2010-02-11 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (tfile_open): Remove spurious discard_cleanups. |
| Merge uploaded TSVs before merging uploaded tracepoints. |
| |
| 2010-02-11 Pedro Alves <pedro@codesourcery.com> |
| |
| * ax-gdb.c (gen_deref): Don't allow dereferencing void pointers. |
| |
| 2010-02-11 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Add extra |
| whitespace character after a dot in comment. |
| (mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables): |
| Likewise. |
| (list_args_or_locals): For the 'all' (that is |
| -stack-list-variables) case, always output list of tuples. |
| Output 'arg' field if variable is argument. |
| |
| 2010-02-10 Tom Tromey <tromey@redhat.com> |
| |
| * parser-defs.h (parser_debug): Declare. |
| * parse.c (_initialize_parse): Install "debug parser" set/show |
| command. |
| (parser_debug): New global. |
| (show_parserdebug): New function. |
| * c-exp.y (c_parse): Set yydebug. |
| |
| 2010-02-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * target-descriptions.c (tdesc_type): Add TDESC_TYPE_I387_EXT, |
| TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR. |
| (tdesc_predefined_types): Add i387_ext, i386_eflags and |
| i386_mxcsr. |
| (tdesc_find_type): New. |
| (tdesc_gdb_type): Use tdesc_find_type. Handle TDESC_TYPE_I387_EXT, |
| TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR. |
| |
| * target-descriptions.h (tdesc_find_type): New. |
| |
| 2010-02-10 Michael Snyder <msnyder@vmware.com> |
| |
| * gdb-gdb.py: Comment fix. |
| |
| 2010-02-09 Tristan Gingold <gingold@adacore.com> |
| |
| * machoread.c (macho_symfile_relocate): New function. |
| (macho_sym_fns): Use macho_symfile_relocate instead of |
| default_symfile_relocate. |
| (macho_oso_data): New type. |
| (current_oso): New variable. |
| (macho_add_oso_symfile): Do not compute section_addr_info, but |
| instead set vma of sections. |
| Do not set SYMFILE_VERBOSE to call symbol_file_add_from_bfd. |
| Set and clear current_oso. |
| |
| 2010-02-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Wrong type description for tagged type parameter. |
| * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: When noside is |
| EVAL_AVOID_SIDE_EFFECTS, also handle the case when type is a |
| reference to a tagged type. |
| |
| 2010-02-09 Tristan Gingold <gingold@adacore.com> |
| |
| * objfiles.c (objfile_separate_debug_iterate): Do not iterate on |
| brothers of the parent. |
| |
| 2010-02-08 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/8017: |
| * value.h: Update. |
| * valops.c (search_struct_field): Make 'name' const. |
| (search_struct_method): Likewise. |
| (find_method_list): Make 'method' const. |
| (value_struct_elt): Make 'name' and 'err' const. |
| (value_find_oload_method_list): Make 'method' const. |
| (find_overload_match): Make 'name' const. |
| * eval.c (evaluate_subexp_standard): New locals function, |
| function_name. |
| <OP_FUNCALL>: Handle OP_SCOPE specially. |
| |
| 2010-02-08 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * infrun.c (handle_inferior_event): Do not look up regcache |
| for exited processes. |
| |
| Mon Feb 8 13:17:10 2010 Chris Moller <moller@mollerware.com> |
| |
| PR gdb/10728 |
| * valarith.c (value_ptrdiff): Added a test for a zero type length, |
| warn if found, and assume length = 1. |
| |
| 2010-02-08 Chris Moller <cmoller@redhat.com> |
| |
| PR gdb/9067 |
| * cp-valprint.c (cp_print_value_fields) Fix use of obstacks. |
| cp_print_static_field) Fix use of obstacks. |
| |
| 2010-02-08 Pedro Alves <pedro@codesourcery.com> |
| |
| * linux-nat.c (linux_nat_resume): In non-stop, also only tag |
| resumed LWPs as resumed. |
| (linux_nat_wait_1): If there's no resumed LWP in the set of LWPs |
| we're waiting for, bail out with TARGET_WAITKIND_IGNORE, instead |
| of throwing an internal error. If an LWP of a process we're not |
| waiting for reports a signal, don't force collecting a SIGSTOP, |
| and if it was breakpoint hit in non-stop mode, cancel it. Don't |
| go through all LWPs cancelling breakpoints in non-stop mode. |
| (resume_stopped_resumed_lwps): New. |
| (linux_nat_wait): Use it. |
| |
| 2010-02-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * features/Makefile (WHICH): Add i386/i386, i386/i386-linux, |
| i386/amd64 and i386/amd64-linux. |
| (i386/i386-expedite): New. |
| (i386/i386-linux-expedite): Likewise. |
| (i386/amd64-expedite):Likewise. |
| (i386/amd64-linux-expedite): Likewise. |
| ($(outdir)/i386/i386-linux.dat): Likewise. |
| ($(outdir)/i386/amd64.dat): Likewise. |
| ($(outdir)/i386/amd64-linux.dat): Likewise. |
| |
| * features/i386/32bit-core.xml: New. |
| * features/i386/32bit-linux.xml: Likewise. |
| * features/i386/32bit-sse.xml: Likewise. |
| * features/i386/64bit-core.xml: Likewise. |
| * features/i386/64bit-linux.xml: Likewise. |
| * features/i386/64bit-sse.xml: Likewise. |
| * features/i386/i386-linux.xml: Likewise. |
| * features/i386/i386.xml: Likewise. |
| * features/i386/amd64-linux.xml: Likewise. |
| * features/i386/amd64.xml: Likewise. |
| * features/i386/i386-linux.c: Likewise. |
| * features/i386/i386.c: Likewise. |
| * features/i386/amd64-linux.c: Likewise. |
| * features/i386/amd64.c: Likewise. |
| |
| 2010-02-05 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| PR c++/7935: |
| * cp-support.h: Added char* alias element to using_direct data |
| struct. |
| (cp_add_using): Added char* alias argument. |
| (cp_add_using_directive): Ditto. |
| * cp-namespace.c: Updated with the above changes. |
| (cp_lookup_symbol_imports): Check for aliases. |
| * dwarf2read.c (read_import_statement): Figure out local alias |
| for the import and pass it on to cp_add_using. |
| (read_namespace): Pass alias argument to cp_add_using. |
| |
| 2010-02-05 Hui Zhu <teawater@gmail.com> |
| |
| * defs.h (gdb_bfd_errmsg): New extern. |
| * exec.c (exec_file_attach): Change bfd_errmsg to |
| gdb_bfd_errmsg. |
| * utils.c (AMBIGUOUS_MESS1): New macro. |
| (AMBIGUOUS_MESS2): New macro. |
| (gdb_bfd_errmsg): New function. |
| |
| 2010-02-04 Doug Evans <dje@google.com> |
| |
| * solib-svr4.c (enable_break): Add comment. |
| |
| 2010-02-04 Anthony Green <green@moxielogic.com> |
| |
| * moxie-tdep.c (moxie_analyze_prologue): Fail protocol analysis |
| gracefully. |
| |
| 2010-02-04 Tom Tromey <tromey@redhat.com> |
| |
| * valops.c (search_struct_field): Account for |
| value_embedded_offset. Fix check for virtual base past the end of |
| the object. Use value_copy when making a slice of the value. |
| |
| 2010-02-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR tui/9622 |
| * tui/tui-interp.c (tui_init): Call tui_initialize_readline |
| only if gdb_stdout is a tty. |
| |
| 2010-02-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * target-descriptions.c: Include "osabi.h". |
| (maint_print_c_tdesc_cmd): Generate set_tdesc_osabi for valid |
| OSABI. |
| |
| 2010-02-04 Tristan Gingold <gingold@adacore.com> |
| |
| * machoread.c (macho_add_oso): Renamed to macho_register_oso. |
| (macho_symtab_read): Adjust calls to macho_add_oso. |
| (macho_oso_symfile): Renamed to macho_symfile_read_all_oso. |
| (macho_symfile_read): Adjust call to macho_oso_symfile. |
| (macho_new_init): Move this function after declarations. |
| (macho_symfile_init): Ditto. |
| * darwin-nat-info.c (darwin_lib_gdb_ports): Remove. |
| * darwin-nat.c (darwin_lookup_task): Remove unused prototype. |
| |
| 2010-02-04 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Include MI command in remotelog. |
| |
| * mi/mi-main.c (mi_execute_command): Call target_log_command. |
| |
| 2010-02-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * remote.c (remote_state): Remove gdbarch. |
| (init_remote_state): Don't set gdbarch. |
| (remote_query_supported): Pass target_gdbarch instead of |
| rs->gdbarch to gdbarch_qsupported. |
| |
| 2010-02-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * gdbarch.sh: Add qsupported. |
| |
| * gdbarch.c: Regenerated. |
| * gdbarch.h: Likewise. |
| |
| * remote.c (remote_state): Add gdbarch. |
| (init_remote_state): Set gdbarch. |
| (remote_query_supported): Support gdbarch_qsupported. |
| |
| 2010-02-03 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Also check for |
| __FreeBSD_kernel_version. |
| |
| 2010-02-03 Tristan Gingold <gingold@adacore.com> |
| |
| * symfile.h (struct sym_fns): Add sym_relocate field. |
| (default_symfile_relocate): New prototype. |
| (symfile_relocate_debug_section): First argument is now an objfile. |
| * symfile.c (default_symfile_relocate): Rename from |
| symfile_relocate_debug_section, first argument is now an objfile. |
| (symfile_relocate_debug_section): New function. |
| * coffread.c (coff_sym_fns): Set sym_relocate field. |
| * somread.c (som_sym_fns): Ditto. |
| * mipsread.c (ecoff_sym_fns): Ditto. |
| * machoread.c (macho_sym_fns): Ditto. |
| * elfread.c (elf_sym_fns): Ditto. |
| * dwarf2read.c (dwarf2_read_section): Ditto. |
| * xcoffread.c (xcoff_sym_fns): Ditto. |
| * dbxread.c (aout_sym_fns): Ditto. |
| (dbx_psymtab_to_symtab): Adjust call to symfile_relocate_debug_section. |
| (elfstab_build_psymtabs): Ditto. |
| |
| 2010-02-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * defs.h (MAX_REGISTER_SIZE): Increase to 32. |
| |
| 2010-02-02 Tom Tromey <tromey@redhat.com> |
| |
| * valops.c (value_cast_structs): Try downcasting using the RTTI |
| type. |
| |
| 2010-02-02 Tom Tromey <tromey@redhat.com> |
| |
| * gnu-v2-abi.c: Don't include gnu-v2-abi.h. |
| (gnuv2_baseclass_offset): Now static. |
| * Makefile.in (HFILES_NO_SRCDIR): Remove gnu-v2-abi.h. |
| * gnu-v2-abi.h: Remove. |
| |
| 2010-02-02 Tom Tromey <tromey@redhat.com> |
| |
| * m2-typeprint.c (m2_record_fields): Don't use |
| TYPE_DECLARED_TYPE. |
| * gdbtypes.h (TYPE_DECLARED_CLASS): New macro. |
| (struct main_type) <flag_declared_class>: New field. |
| (struct cplus_struct_type) <declared_type>: Remove. |
| <ntemplate_args>: Move earlier. |
| (DECLARED_TYPE_CLASS, DECLARED_TYPE_UNION, DECLARED_TYPE_STRUCT) |
| (DECLARED_TYPE_TEMPLATE): Remove. |
| (TYPE_DECLARED_TYPE): Remove. |
| * gdbtypes.c (lookup_union): Don't use TYPE_DECLARED_TYPE. |
| * dwarf2read.c (read_structure_type): Set TYPE_DECLARED_CLASS. |
| * c-typeprint.c (c_type_print_base): Use TYPE_DECLARED_CLASS, not |
| TYPE_DECLARED_TYPE. |
| |
| 2010-02-02 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/11226, PR c++/9629, PR c++/9688, PR c++/8890: |
| * valops.c (search_struct_field): Compute nbases after calling |
| CHECK_TYPEDEF. |
| (check_field): Call CHECK_TYPEDEF. |
| * cp-valprint.c (cp_print_value): Pass correct address to |
| baseclass_offset. Fix check for virtual base past the end of the |
| object. Don't offset address passed to cp_print_value_fields or |
| apply_val_pretty_printer. |
| (cp_print_value_fields): Fix call to val_print. |
| (cp_print_value_fields_rtti): New function. |
| * c-valprint.c (c_val_print): Use cp_print_value_fields_rtti. |
| * p-valprint.c (pascal_object_print_value_fields): Fix call to |
| val_print. |
| * python/py-prettyprint.c (apply_val_pretty_printer): Add embedded |
| offset to address. |
| * language.h (struct language_defn) <la_val_print>: Document. |
| * c-lang.h (cp_print_value_fields_rtti): Declare. |
| |
| 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| PR libc/11214: |
| * linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New. |
| (linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU]. |
| (linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New. |
| |
| 2010-02-01 Michael Matz <matz@suse.de> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * i386-tdep.c (i386_frame_cache): Assume valid anonymous |
| functions use a frame pointer. |
| |
| 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert |
| by a conditional setting DYN_ADDR. Use DYN_ADDR. |
| * config/djgpp/fnchange.lst: Add translations for |
| symbol-without-target_section.exp and symbol-without-target_section.c. |
| |
| 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * gdbarch.sh: Set LANG and LC_ALL to C, not c. |
| (remote_breakpoint_for_pc): Correct invalid_p check. |
| * gdbarch.c: Regenerated. |
| |
| 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-tdep.c (arm_find_mapping_symbol): New function, from |
| arm_pc_is_thumb. |
| (arm_pc_is_thumb): Use arm_find_mapping_symbol. |
| (extend_buffer_earlier): New function. |
| (MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants. |
| (arm_adjust_breakpoint_address): New function. |
| (arm_gdbarch_init): Register arm_adjust_breakpoint_address. |
| |
| 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint) |
| (arm_linux_thumb2_le_breakpoint): New constants. |
| (arm_linux_init_abi): Set thumb2_breakpoint and |
| thumb2_breakpoint_size. |
| * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions. |
| (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE. |
| Implement support for single stepping through IT blocks if |
| a 32-bit Thumb breakpoint instruction is available. |
| (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction |
| is available, use it when needed. |
| (arm_remote_breakpoint_from_pc): New function. |
| (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc. |
| * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint |
| comment. Add thumb2_breakpoint and thumb2_breakpoint_size. |
| |
| 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * arch-utils.c (default_remote_breakpoint_from_pc): New function. |
| * arch-utils.h (default_remote_breakpoint_from_pc): Declare. |
| * gdbarch.c, gdbarch.h: Regenerated. |
| * gdbarch.sh (remote_breakpoint_from_pc): New architecture method. |
| * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use |
| gdbarch_remote_breakpoint_from_pc. |
| |
| 2010-01-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * infrun.c (prepare_to_proceed): Handle other signals which might |
| match a breakpoint. |
| (handle_inferior_event): Move the check for unusual breakpoint |
| signals earlier. |
| |
| 2010-01-29 Paul Hilfinger <hilfinger@adacore.com> |
| |
| amd64 - function returning record with field straddling 2 registers. |
| * amd64-tdep.c (amd_classify_aggregate): Handle the case of |
| a record of length <= 16 in which a field straddles the two |
| eightbytes. |
| |
| 2010-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| Implement return values on amd64-windows. |
| * amd64-windows-tdep.c: #include gdbcore.h and regcache.h. |
| (amd64_windows_return_value): New function. |
| (amd64_windows_init_abi): Call set_gdbarch_return_value with |
| amd64_windows_return_value. |
| |
| 2010-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| amd64-windows: 32 bytes allocated on stack by caller for integer |
| parameter registers. |
| * i386-tdep.h (struct gdbarch_tdep): Add new field |
| integer_param_regs_saved_in_caller_frame. |
| * amd64-windows-tdep.c (amd64_windows_init_abi): Set |
| tdep->integer_param_regs_saved_in_caller_frame to 1. |
| * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on |
| stack if tdep->integer_param_regs_saved_in_caller_frame is set. |
| |
| 2010-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| amd64-windows: memory args passed by pointer during function calls. |
| * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer. |
| * amd64-tdep.c (amd64_push_arguments): Add handling of architectures |
| where tdep->memory_args_by_pointer is non-zero. |
| * amd64-windows-tdep.c (amd64_windows_init_abi): Set |
| tdep->memory_args_by_pointer to 1. |
| |
| 2010-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| amd64-windows: Integer parameters in function calls. |
| * i386-tdep.h (enum amd64_reg_class): New, moved here from |
| amd64-tdep.c. |
| (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs, |
| call_dummy_integer_regs, and classify. |
| * amd64-tdep.h (amd64_classify): Add declaration. |
| * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant. |
| (amd64_reg_class): Delete, moved to i386-tdep.h. |
| (amd64_classify): Make non-static. Move declaration to amd64-tdep.h. |
| Replace call to amd64_classify by call to tdep->classify. |
| (amd64_push_arguments): Get the list of registers to use for |
| passing integer parameters from the gdbarch tdep structure, |
| rather than using a hardcoded one. Replace calls to amd64_classify |
| by calls to tdep->classify. |
| (amd64_push_dummy_call): Get the register number used for |
| the "hidden" argument from tdep->call_dummy_integer_regs. |
| (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs |
| and tdep->call_dummy_integer_regs. Set tdep->classify. |
| * amd64-windows-tdep.c: Add include of gdbtypes.h. |
| (amd64_windows_dummy_call_integer_regs): New static global. |
| (amd64_windows_classify): New function. |
| (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs |
| tdep->call_dummy_integer_regs and tdep->classify. |
| |
| 2010-01-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * regcache.c (regcache_xmalloc): Add aspace argument. Use it |
| for the new regcache. All callers updated. |
| (regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here. |
| (get_thread_arch_regcache): Do not set aspace here. |
| * regcache.h (regcache_xmalloc): Update declaration. |
| |
| * frame.c, infcall.c, ppc-linux-tdep.c: Calls to |
| regcache_xmalloc updated. |
| |
| 2010-01-28 Joel Brobecker <brobecker@adacore.com> |
| |
| Another -Wunused-function error in procfs.c (sparc-solaris) |
| * procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up. |
| Only define if SYS_syssgi is defined. |
| (remove_dbx_link_breakpoint): Delete declaration. Move up. |
| (dbx_link_addr, insert_dbx_link_bpt_in_file) |
| (insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi |
| is itself defined. |
| |
| 2010-01-27 Christopher Faylor <me+cygwin@cgf.cx> |
| |
| * windows-nat.c (windows_initialization_done): New variable. |
| (get_windows_debug_event): Issue error when process dies before |
| completely initializing. |
| (do_initial_windows_stuff): Set flag to indicate when we are done with |
| the initial steps of attaching to the child. |
| |
| 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symtab.h (struct symbol <symtab>): New comment on NULL values. |
| |
| 2010-01-27 Doug Evans <dje@google.com> |
| |
| * solib-svr4.c (solib_break_names): Add __dl_rtld_db_dlactivity. |
| |
| * breakpoint.c (bpstat_stop_status): Delete useless code. |
| |
| 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * printcmd.c (display_uses_solib_p): Remove variable section. Access |
| objfile via SYMBOL_SYMTAB. |
| |
| 2010-01-26 Tom Tromey <tromey@redhat.com> |
| |
| PR exp/7643: |
| * eval.c (evaluate_subexp_for_address) <UNOP_IND>: Call |
| coerce_array on result. |
| |
| 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| * cp-namespace.c (cp_lookup_symbol_namespace): Added |
| search_parent argument. |
| (cp_add_using): Initialize 'searched' field. |
| (reset_directive_searched): New function. |
| * cp-support.h: Add 'searched' field to using_direct struct. |
| (cp_lookup_symbol_imports): Ditto. |
| * cp-namespace.c (cp_lookup_symbol_imports): Ditto. |
| Perform recursive search. |
| Implement non parent search. |
| * valops.c (value_maybe_namespace_elt): Updated. |
| |
| 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com> |
| |
| PR gdb/10929: |
| * dwarf2read.c (read_lexical_block_scope): Create blocks for |
| scopes which contain using directives even if they contain no |
| declarations. |
| * symtab.c (lookup_symbol_aux): Pass lowest level block to |
| la_lookup_symbol_nonlocal. |
| * cp-namespace.c (cp_lookup_symbol_nonlocal): call |
| cp_lookup_symbol_namespace. |
| (cp_lookup_symbol_namespace): Perform an import lookup at every |
| block level. |
| (cp_lookup_symbol_imports): New function. |
| (cp_lookup_symbol_in_namespace): New function. |
| |
| 2010-01-25 Tom Tromey <tromey@redhat.com> |
| |
| PR gdb/11049: |
| * c-valprint.c (c_val_print): Fix test of extract_unsigned_integer |
| result. |
| |
| 2010-01-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> |
| |
| * configure.ac: Only use host_os part when disabling TUI on osf. |
| Use test to check variables, prefix strings with x. |
| * configure: Regenerate. |
| |
| * solib-osf.c (osf_current_sos): Initialize tail. |
| |
| 2010-01-25 gingold <gingold@adacore.com> |
| |
| * windows-nat.c (windows_continue): Use %x to print thread id. |
| (get_windows_debug_event): Ditto. |
| |
| 2010-01-22 Tom Tromey <tromey@redhat.com> |
| |
| PR symtab/11199: |
| * dwarf2read.c (quirk_gcc_member_function_pointer): Change return |
| type and arguments. Use smash_to_methodptr_type. |
| (read_structure_type): Call quirk_gcc_member_function_pointer |
| later. |
| * gdbtypes.h (smash_to_methodptr_type): Declare. |
| * gdbtypes.c (smash_to_methodptr_type): New function. |
| (lookup_methodptr_type): Use it. |
| |
| 2010-01-21 Tom Tromey <tromey@redhat.com> |
| |
| PR symtab/11198: |
| * symtab.h (lookup_minimal_symbol_and_objfile): Declare. |
| * minsyms.c (lookup_minimal_symbol_and_objfile): New function. |
| * glibc-tdep.c (find_minsym_and_objfile): Remove. |
| (glibc_skip_solib_resolver): Use |
| lookup_minimal_symbol_and_objfile. |
| |
| 2010-01-21 Kai Tietz <kai.tietz@onevision.com> |
| |
| * inflow.c (check_syscall): Guard by #if clause for GO32 and |
| WIN32 targets. |
| |
| 2010-01-20 Tom Tromey <tromey@redhat.com> |
| |
| PR backtrace/10770: |
| * valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and |
| BINOP_GEQ. Handle BINOP_NOTEQUAL in the signed case. |
| * dwarf2expr.c (new_dwarf_expr_context): Allocate |
| dwarf_stack_values, not CORE_ADDRs. |
| (execute_stack_op): Change DW_OP_div and comparison operators to |
| use signed operands. |
| |
| 2010-01-20 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Per-inferior args and tty and environment. |
| |
| * infcmd.c (inferior_args): Rename to ... |
| (inferior_args_scratch): ... this. |
| (inferior_io_terminal): Rename to ... |
| (inferior_io_terminal_scratch): ... this. |
| (inferior_argc, inferior_argv): Remove. |
| (set_inferior_io_terminal, get_inferior_io_terminal): Store |
| inside current_inferior(). |
| (set_inferior_tty_command, show_inferior_tty_command): New. |
| (get_inferior_args, set_inferior_args): Store inside |
| current_inferior(). |
| (notice_args_set): Likewise and rename to... |
| (set_args_command): ... this. |
| (set_inferior_args_vector): Likewise. |
| (notice_args_read): Rename to... |
| (show_args_command): ...new. |
| (tty_command): Remove. |
| (run_command_1): Don't free old args, as they are freed by |
| set_inferior_arg now. |
| (run_no_args_command): Likewise. |
| (inferior_environ): Remove. |
| (run_command_1): Use environment of the current inferior. |
| (environment_info, set_environment_command) |
| (unset_environment_command, path_info, path_command): Likewise. |
| (_initialize_infcmd): Adjust for function and variable renames. |
| Do not init inferior_environ. |
| * inferior.h (set_inferior_arg): Adjust prototype. |
| (struct inferior): New fields args, argc, argv, terminal, environment. |
| (inferior_environ): Remove declaration. |
| * inferior.c (free_inferior): Free new fields. |
| (add_inferior_silent): Initialize 'environment' field. |
| * main.c (captured_main): Set arguments only after the initial |
| inferior has been created. Set set_inferior_io_terminal, |
| not tty_command. |
| * mi/mi-main.c (mi_cmd_env_path): Use environment of the current |
| inferior. |
| (_initialize_mi_cmd_env): Adjust for disappearance of global |
| inferior_environ. |
| * solib.c (solib_find): Use environment of the current inferior. |
| |
| 2010-01-20 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if |
| HAVE_PYTHON. |
| (instantiate_pretty_printer): Move HAVE_PYTHON outside of the function. |
| |
| 2010-01-20 Joel Brobecker <brobecker@adacore.com> |
| |
| Get rid of ada-lang.c:function_name_from_pc. |
| * ada-lang.c: Add "stack.h" #include. |
| (function_name_from_pc): Delete. |
| (is_known_support_routine): Replace call to function_name_from_pc |
| by call to find_frame_funname. |
| (ada_unhandled_exception_name_addr_from_raise): Likewise. |
| |
| 2010-01-19 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/11026: |
| * dwarf2read.c (read_partial_die): Allocate partial DIE's name on |
| objfile obstack. |
| |
| 2010-01-19 Tom Tromey <tromey@redhat.com> |
| |
| * top.c (stop_sig, float_handler, do_nothing): Remove. |
| |
| 2010-01-19 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * breakpoint.c (watchpoint_check): Check the call |
| gdbarch_in_function_epilogue_p before calling frame_find_by_id. |
| Extend the comment. |
| * config/djgpp/fnchange.lst: Add translations for |
| watchpoint-cond-gone.exp, watchpoint-cond-gone.c and |
| watchpoint-cond-gone-stripped.c. |
| |
| 2010-01-19 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/8000: |
| * dwarf2read.c (partial_die_parent_scope): Put enumeration type |
| into parent scope, and enumerator into grandparent scope. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of |
| i[34567]86-*-solaris2.1[0-9]*. |
| * configure.tgt: Likewise. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Document the source command enhancement allowing it |
| to load Python scripts. Document the "set/show script-extension" |
| commands. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| Add -Wunused-function to compile flags. |
| * configure.ac: Add -Wunused-function to build_warnings. |
| * configure: Regenerate. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| "delete" ada-lex.c:input function, not used. |
| * ada-lex.l: #define YY_NO_INPUT. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| Delete free_named_symtabs and associated cleanup. |
| * symfile.h (free_named_symtabs): Delete declaration. |
| * symfile.c: Remove some commented out code (clear_symtab_users_once). |
| (cashier_psymtab): Comment function out. |
| Delete declaration. |
| (free_named_symtabs): Delete. |
| * coffread.c (coff_end_symtab): Remove call to free_named_symtabs. |
| * dbxread.c (end_psymtab): Likewise. |
| * dwarf2read.c (process_psymtab_comp_unit): Ditto. |
| * exec.c (exec_close_1): Ditto. |
| * xcoffread.c (xcoff_end_psymtab): Likewise. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * stack.c (print_block_frame_labels): Comment function out. |
| |
| 2010-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| Delete unused or undefined functions. |
| * breakpoint.c (ep_parse_optional_filename): Delete. |
| * dcache.c (dcache_write_line): Remove declaration. |
| * infrun.c (build_infrun): Remove declaration. |
| * tracepoint.c (tracepoint_save_command): Remove declaration. |
| * linux-nat.c (init_lwp_list): Delete. No longer used. |
| * event-loop.c (check_async_signal_handlers): Delete declaration. |
| * infrun.c (init_execution_control_state): Delete. |
| (proceed): Update comment to avoid mentioning |
| init_execution_control_state. |
| * target.c (kill_or_be_killed, nosupport_runtime): Delete. |
| * ada-lang.c (ada_to_static_fixed_value): Delete. |
| * scm-lang.c (evaluate_subexp_scm): Delete declaration. |
| * cp-namespace.c (cp_copy_usings): Delete. |
| * xml-syscall.c (xml_number_of_syscalls): Delete. |
| * progspace.c (find_program_space_by_num): Delete. |
| * inflow.c (handle_sigio): Delete declaration. |
| * hppa-tdep.c (hppa_alignof): Delete. |
| * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset) |
| (mipsnbsd_core_osabi_sniffer): Delete. |
| |
| 2010-01-18 Tom Tromey <tromey@redhat.com> |
| |
| PR c++/9680: |
| * c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST) |
| (CONST_CAST): New tokens. |
| (exp): Add new productions. |
| (ident_tokens): Add const_cast, dynamic_cast, static_cast, and |
| reinterpret_cast. |
| (is_cast_operator): New function. |
| (yylex): Handle cast operators specially. |
| * eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST, |
| UNOP_REINTERPRET_CAST>: New cases. |
| * expprint.c (print_subexp_standard): Likewise. |
| (op_name_standard): Likewise. |
| (dump_subexp_body_standard): Likewise. |
| * parse.c (operator_length_standard): Likewise. |
| * expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST, |
| UNOP_REINTERPRET_CAST. |
| * gdbtypes.c (class_types_same_p): New function. |
| (is_ancestor): Use it. |
| (is_public_ancestor): New function. |
| (is_unique_ancestor_worker): Likewise. |
| (is_unique_ancestor): Likewise. |
| * gdbtypes.h (class_types_same_p, is_public_ancestor) |
| (is_unique_ancestor): Declare. |
| * valops.c (value_reinterpret_cast): New function. |
| (dynamic_cast_check_1): Likewise. |
| (dynamic_cast_check_2): Likewise. |
| (value_dynamic_cast): Likewise. |
| * value.h (value_reinterpret_cast, value_dynamic_cast): Declare. |
| |
| 2010-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix build failure when building without Python support. |
| * python/python.c: Always include exceptions.h, even when HAVE_PYTHON |
| is not defined. |
| |
| 2010-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| Use XVS field type instead of doing a parallel lookup. |
| * ada-lang.c (ada_get_base_type): Follow the XVS field type |
| if it is a reference type instead of doing a type lookup using |
| the XVS field name. |
| |
| 2010-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| Trust PAD types instead of using PAD___XVS. |
| * ada-lang.c (trust_pad_over_xvs): New static variable. |
| (ada_is_aligner_type): If !trust_pad_over_xvs and there is a |
| parallel XVS type, follow the XVS type instead of the PAD type. |
| (unwrap_value): Make sure that there is no parallel XVE type |
| before returning the value as is. |
| (set_ada_list, show_ada_list): New static variables. |
| (set_ada_command, show_ada_command): New functions. |
| (_initialize_ada_language): Add new "set/show ada" prefix commands. |
| Add new "set/show ada trust-PAD-over-XVS" setting. |
| |
| 2010-01-18 Tom Tromey <tromey@redhat.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| Allow "source" to load python scripts. |
| * exceptions.h (enum errors): Add UNSUPPORTED_ERROR. |
| * python/python.c (source_python_script): New function. |
| * python/python.h (source_python_script): Add declaration. |
| * cli/cli-cmds.c: #include exceptions.h and python/python.h. |
| (script_ext_off, script_ext_soft, script_ext_strict) |
| (script_ext_enums, script_ext_mode): New static constants. |
| (show_script_ext_mode, find_and_open_script): New functions. |
| (source_script): Enhance to handle Python scripts. |
| (init_cli_cmds): Add set/show script-extension commands. |
| |
| 2010-01-16 Stan Shebs <stan@codesourcery.com> |
| |
| * tracepoint.h (struct trace_status): Use unsigned long long |
| instead of size_t. |
| * tracepoint.c (trace_status_command): Fix printf directive. |
| (trace_save_command): Check fwrite returns, fix printf directive. |
| (trace_filename): New global. |
| (tfile_open): Set it, check read returns. |
| (tfile_close): Free trace_filename. |
| (tfile_get_traceframe_address): Check read returns. |
| (tfile_trace_find): Ditto. |
| (tfile_fetch_registers): Ditto. |
| (tfile_xfer_partial): Ditto. |
| (tfile_get_trace_state_variable_value): Ditto. |
| |
| 2010-01-15 Stan Shebs <stan@codesourcery.com> |
| |
| Add trace file support. |
| * tracepoint.h (enum trace_stop_reason): New enum. |
| (struct trace_status): New struct. |
| (parse_trace_status): Declare. |
| (struct uploaded_tp): Move here from remote.c, |
| add fields for actions. |
| (struct uploaded_tsv): New struct. |
| * tracepoint.c (tfile_ops): New target vector. |
| (trace_fd): New global. |
| (tfile_open): New function. |
| (tfile_close): New function. |
| (tfile_files_info): New function. |
| (tfile_get_trace_status): New function. |
| (tfile_get_traceframe_address): New function. |
| (tfile_trace_find): New function. |
| (tfile_fetch_registers): New function. |
| (tfile_xfer_partial): New function. |
| (tfile_get_trace_state_variable_value): New function. |
| (init_tfile_ops): New function. |
| (_initialize_tracepoint): Call it, add tfile target. |
| (trace_status): New global. |
| (current_trace_status): New function. |
| (trace_running_p): Remove, change all users to get from |
| current_trace_status()->running. |
| (get_trace_status): Remove. |
| (trace_status_command): Call target_get_trace_status directly, |
| report more detail including tracing stop reasons. |
| (trace_find_command): Always allow tfind on a file. |
| (trace_find_pc_command): Ditto. |
| (trace_find_tracepoint_command): Ditto. |
| (trace_find_line_command): Ditto. |
| (trace_find_range_command): Ditto. |
| (trace_find_outside_command): Ditto. |
| (trace_frames_offset, cur_offset): Declare as off_t. |
| (trace_regblock_size): Rename from reg_size, update users. |
| (parse_trace_status): New function. |
| (tfile_interp_line): New function. |
| (disconnect_or_stop_tracing): Ensure current trace |
| status before asking what to do. |
| (stop_reason_names): New global. |
| (trace_save_command): New command. |
| (get_uploaded_tp): Move here from remote.c. |
| (find_matching_tracepoint): Ditto. |
| (merge_uploaded_tracepoints): New function. |
| (parse_trace_status): Use stop_reason_names. |
| (_initialize_tracepoint): Define tsave command. |
| * target.h (target_ops): New fields to_save_trace_data, |
| to_upload_tracepoints, to_upload_trace_state_variables, |
| to_get_raw_trace_data, change to_get_trace_status |
| to take a pointer to a status struct. |
| (target_save_trace_data): New macro. |
| (target_upload_tracepoints): New macro. |
| (target_upload_trace_state_variables): New macro. |
| (target_get_raw_trace_data): New macro. |
| * target.c (update_current_target): Add new methods, change |
| signature of to_get_trace_status. |
| * remote.c (hex2bin): Make globally visible. |
| (bin2hex): Ditto. |
| (remote_download_trace_state_variable): Download name also. |
| (remote_get_trace_status): Update parameter, use |
| parse_trace_status. |
| (remote_save_trace_data): New function. |
| (remote_upload_tracepoints): New function. |
| (remote_upload_trace_state_variables): New function. |
| (remote_get_raw_trace_data): New function. |
| (remote_start_remote): Use them. |
| (_initialize_remote_ops): Add operations. |
| * ax-gdb.c: Include breakpoint.h. |
| * breakpoint.c (create_tracepoint_from_upload): Use |
| break_command_really, return tracepoint, warn about unimplemented |
| parts. |
| * NEWS: Mention trace file addition. |
| |
| 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix compilation warning on gcc-3.4. |
| * exec.c (print_section_info): Move the `displacement' variable |
| initialization to its declaration. |
| |
| 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE |
| comparison. |
| |
| 2010-01-15 Eric Botcazou <botcazou@adacore.com> |
| |
| "info tasks" broken by typedefs in ATCB type definitions. |
| * ada-lang.c (ada_template_to_fixed_record_type_1): Add call to |
| ada_check_typedef before retrieving the length of the type for |
| regular fields. |
| |
| 2010-01-15 Joel Brobecker <brobecker@adacore.com> |
| |
| Do not use name-based lookup for unconstrained packed arrays. |
| * ada-lang.c (find_parallel_type_by_descriptive_type): |
| Limit the fallback to name-based lookups to the case where |
| the type is a constrained packed array. |
| |
| 2010-01-15 Joel Brobecker <brobecker@adacore.com> |
| |
| Enhance gdb-gdb.py to handle main_type.type_specific. |
| * gdb-gdb.py: Print the type-specific part of struct main_type. |
| |
| 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * utils.c: Include sys/resource.h. |
| (dump_core, can_dump_core): New. |
| (internal_vproblem): Update the comment. Check can_dump_core while |
| setting dump_core_p. Replace two abort calls by dump_core calls. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Eli Zaretskii <eliz@gnu.org> |
| |
| * NEWS: Document the PIE support. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h. |
| (check_is_pie_binary, _initialize_linux_tdep): Remove. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (svr4_exec_displacement): New comment for entry_point. |
| Replace exec_entry_point call by bfd_get_start_address. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Support Valgrind attachments broken by the PIE support. |
| * auxv.c: Include gdbcore.h. |
| (procfs_xfer_auxv): Make static. Reduce its comment. Drop its |
| parameters ops, object and annex. Remove their assertions. |
| (ld_so_xfer_auxv, memory_xfer_auxv): New function. |
| * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ... |
| (memory_xfer_auxv): ... here. |
| * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to |
| memory_xfer_auxv. |
| * procfs.c (procfs_xfer_partial): Likewise. |
| * solib-svr4.c (svr4_relocate_main_executable): New prototype. |
| (svr4_special_symbol_handling): Call svr4_relocate_main_executable. |
| (svr4_solib_create_inferior_hook): Conditionalize the |
| svr4_relocate_main_executable call. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (scan_dyntag): Remove variable dyn_addr. New variable |
| target_section. Find SECT in current_target_sections, gdb_assert it. |
| (elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile. |
| New variable abfd. |
| * symtab.c (lookup_objfile_from_block): Return the binary file instead |
| of separate debug info file. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Support PIEs with no symfile_objfile. |
| * exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point. |
| * solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block. |
| |
| 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * solib-svr4.c (svr4_relocate_main_executable): Move the static exec |
| code part to ... |
| (svr4_static_exec_displacement): ... a new function. |
| (svr4_exec_displacement): New function. |
| (svr4_relocate_main_executable): Call svr4_exec_displacement. Allocate |
| new_offsets using alloca now. Remove variable old_chain and changed. |
| Call objfile_relocate unconditionally now. |
| |
| 2010-01-14 Doug Evans <dje@google.com> |
| |
| * gdbtypes.c (arch_flags_type): Fix comment. |
| * gdbtypes.h (arch_composite_type): Fix comment. |
| |
| 2009-01-14 Tristan Gingold <gingold@adacore.com> |
| |
| * machoread.c (macho_add_oso_symfile): Add symfile_flags parameter. |
| Call xstrdup for abfd->filename. Pass symfile_flags and objfile flags |
| to symbol_file_add_from_bfd. Add OSO as separate objfile. |
| (macho_oso_symfile): Add symfile_flags parameter. Pass it to |
| macho_add_oso_symfile. |
| (macho_symfile_read): Pass symfile_flags to macho_oso_symfile. |
| |
| 2010-01-14 Joel Brobecker <brobecker@adacore.com> |
| |
| Tru64: Dead threads are never deleted. |
| * dec-thread.c (dec_thread_ptid_is_alive): New function. |
| (dec_thread_count_gdb_threads): Fix counter increment. |
| (dec_thread_add_gdb_thread): Fix *listp increment. |
| (resync_thread_list): Fix bug in deletion of dead threads that |
| caused all threads to be deleted, instead of just the dead ones. |
| |
| 2010-01-13 Phil Muldoon <pmuldoon@redhat.com> |
| |
| PR python/10705 |
| |
| * python/python-internal.h: Add lazy_string_object_type |
| definition. |
| (create_lazy_string_object, gdbpy_initialize_lazy_string) |
| (gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define. |
| * python/py-value.c (valpy_lazy_string): New function. |
| (convert_value_from_python): Add lazy string conversion. |
| * python/py-prettyprint.c (pretty_print_one_value): Check if |
| return is also a lazy string. |
| (print_string_repr): Add lazy string printing branch. |
| (print_children): Likewise. |
| * python/py-lazy-string.c: New file. Implement lazy strings. |
| * python/python.c (_initialize_python): Call |
| gdbpy_initialize_lazy_string. |
| * varobj.c (value_get_print_value): Add lazy string printing |
| branch. Account for encoding. |
| * c-lang.c (c_printstr): Account for new encoding argument. If |
| encoding is NULL, find encoding suited for type, otherwise use |
| user encoding. |
| * language.h (language_defn): Add encoding argument. |
| (LA_PRINT_STRING): Likewise. |
| * language.c (unk_lang_printstr): Update to reflect new encoding |
| argument to language_defn. |
| * ada-lang.h (ada_printstr): Likewise. |
| * c-lang.h (c_printstr): Likewise. |
| * p-lang.h (pascal_printstr); |
| * f-lang.c (f_printstr): Likewise. |
| * m2-lang.c (m2_printstr): Likewise. |
| * objc-lang.c (objc_printstr): Likewise. |
| * p-lang.c (pascal_printstr): Likewise. |
| * scm-lang.c (scm_printstr): Likewise. |
| * c-valprint.c (c_val_print): Update LA_PRINT_STRING call for |
| encoding argument. |
| * ada-valprint.c (ada_printstr): Likewise. |
| * f-valprint.c (f_val_print): Likewise |
| * m2-valprint.c (m2_val_print): Likewise. |
| * p-valprint.c (pascal_val_print): Likewise. |
| * expprint.c (print_subexp_standard): Likewise. |
| * valprint.c (val_print_string): Likewise. |
| * Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string. |
| (SUBDIR_PYTHON_SRCS): Likewise. |
| (py-lazy-string.o): New rule. |
| |
| 2010-01-13 Doug Evans <dje@google.com> |
| |
| * mi/mi-main.c (list_available_thread_groups): Avoid "may be used |
| uninitialized" warning from gcc on local `tree'. |
| |
| 2010-01-13 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Implement core awareness. |
| |
| * bcache.c (compare_ints): Remove |
| (print_percentage): Use compare_positive_ints. |
| * defs.h (compare_positive_ints): Declare. |
| * linux-nat.h (struct lin_lwp): New field core. |
| (linux_nat_core_of_thread_1): Declare. |
| * linux-nat.c (add_lwp): Init the 'core' field. |
| (linux_nat_wait_1): Record the core. |
| (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New. |
| (linux_nat_add_target): Register the above. |
| * linux-thread-db.c (update_thread_core): New. |
| (thread_db_find_new_threads): Update core information for |
| every thread. |
| * remote.c (struct private_thread_info): New. |
| (free_private_thread_info, demand_private_info): New. |
| (PACKET_qXfer_threads, use_osdata_threads): New. |
| (struct thread_item, threads_parsing_context |
| (start_thread, end_thread, thread_attributes) |
| (thread_children, threads_children, threads_elements): New. |
| (remote_threads_info): Try qXfer:threads before anything |
| else. |
| (remote_protocol_packets): Register qXfer:threads. |
| (remote_open_1): Init use_osdata_threads. |
| (struct stop_reply): New field 'core'. |
| (remote_parse_stop_reply): Parse core number. |
| (process_stop_reply): Record core number. |
| (remote_xfer_partial): Handle qXfer:threads. |
| (remote_core_of_thread): New. |
| (init_remote_ops): Register remote_core_of_thread. |
| (_initialize_remote): Register qXfer:read. |
| * target.c (target_core_of_thread): New |
| * target.h (enum target_object): New value TARGET_OBJECT_THREADS. |
| (struct target_ops): New field to_core_of_threads. |
| (target_core_of_thread): Declare. |
| * gdbthread.h (struct thread_info): New field private_dtor. |
| * thread.c (print_thread_info): Report the core. |
| * ui-out.c (MAX_UI_OUT_LEVELS): Increase. |
| * utils.c (compare_positive_ints): New. |
| * features/threads.dtd: New. |
| * mi/mi-interp.c (mi_on_normal_stop): Report the core. |
| * mi/mi-main.c (struct collect_cores_data, collect_cores) |
| (do_nothing, free_vector_of_osdata_items) |
| (splay_tree_int_comparator, free_splay_tree): New. |
| (print_one_inferior_data): Implemented printing of selected |
| inferiors. Collect and print cores. |
| (output_cores): New. |
| (mi_cmd_list_thread_groups): Support --recurse. Permit specifying |
| thread groups together with --available. |
| |
| 2010-01-12 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * configure: Regenerate (for _STRUCTURED_PROC). |
| |
| 2010-01-12 Joel Brobecker <brobecker@adacore.com> |
| |
| Delete dead function. |
| * ada-lang.c (extract_string): Delete. No longer used. |
| |
| 2010-01-12 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix -Wunused warning in dec-thread.c. |
| * dec-thread.c (dec_thread_count_gdb_threads) |
| (dec_thread_add_gdb_thread): Prevent -Wunused warning. |
| |
| 2010-01-12 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_print_floating): Remove trailing space. |
| |
| 2010-01-12 Joel Brobecker <brobecker@adacore.com> |
| |
| Add support for DW_AT_GNAT_descriptive_type. |
| * gdbtypes.h (enum type_specific_kind): New enum. |
| (struct main_type) [type_specific_field]: New component. |
| [type_specific]: Add new component "gnat_stuff". |
| (struct gnat_aux_type): New type. |
| (INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type). |
| (HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type). |
| (gnat_aux_default, allocate_gnat_aux_type): Add declaration. |
| (INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO) |
| (TYPE_SPECIFIC_FIELD): New macros. |
| (TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given |
| type does not hold any cplus-specific data. |
| (TYPE_RAW_CPLUS_SPECIFIC): New macro. |
| (TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros. |
| (TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has |
| cplus-specific data. |
| * gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite. |
| Set new component TYPE_SPECIFIC_FIELD (type). |
| (gnat_aux_default): New constant. |
| (allocate_gnat_aux_type): New function. |
| (init_type): Add initialization the type-specific stuff for |
| TYPE_CODE_FLT and TYPE_CODE_FUNC types. |
| (print_gnat_stuff): New function. |
| (recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus- |
| specific data. Adjust code that prints the contents of the |
| type-specific union using the TYPE_SPECIFIC_FIELD value. |
| * dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate |
| the type cplus stuff for Ada types. |
| (dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type): |
| Error out if these routines are called with an Ada type. |
| (read_structure_type, read_array_type, read_subrange_type): |
| Add call to set_descriptive_type. |
| (set_die_type): Initialize the gnat-specific data if necessary. |
| (need_gnat_info, die_descriptive_type, set_descriptive_type): |
| New functions. |
| * ada-lang.c (decode_constrained_packed_array_type): Use |
| decode_constrained_packed_array_type instead of doing a standard |
| lookup to locate a parallel type. |
| (find_parallel_type_by_descriptive_type): New function. |
| (ada_find_parallel_type_with_name): New function. |
| (ada_find_parallel_type): Reimplement using |
| ada_find_parallel_type_with_name. |
| * ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT |
| to check if type has a cplus stuff. |
| * linespec.c (total_number_of_methods): Likewise. |
| * mdebugread.c (new_type): Likewise. |
| |
| 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * NEWS: Document the 0b binary number prefix parsing. |
| |
| 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * objfiles.c (objfile_relocate1): Change the return type to int. |
| Describe the new return value. Return non-zero if data changed. |
| (objfile_relocate): New variable changed. Set it. Call |
| breakpoint_re_set depending on CHANGED. |
| |
| 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Implement binary numbers parsing. |
| * c-exp.y (parse_number): New case 'b' and 'B'. |
| |
| 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Tristan Gingold <gingold@adacore.com> |
| |
| * solib.c (info_sharedlibrary_command): Replace |
| objfile_has_partial_symbols and objfile_has_full_symbols calls by |
| objfile_has_symbols. |
| |
| 2010-01-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Document the improvements made to the mips-irix port. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix the documentation of valprint.c:value_print. |
| * valprint.c (value_print): Update the function description to |
| mention that the syntax of the output follows the current_language, |
| not necessarily C. |
| |
| 2010-01-09 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix displacement of separate debug info files. |
| * objfiles.c (objfile_relocate): Rename to ... |
| (objfile_relocate1): ... here and make it static. Extend the comment. |
| (objfile_relocate): New function. |
| * solib-spu.c (spu_relocate_main_executable): Explicitly check if |
| SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain. |
| Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now |
| allocated using alloca. |
| * symfile.c (copy_section_addr_info): Remove. |
| (build_section_addr_info_from_objfile): Make it global. New variables |
| addr_bit and mask, use them. |
| * symfile.h (build_section_addr_info_from_objfile): New prototype. |
| (copy_section_addr_info): Remove. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Signal unwinder for mips-irix N32. |
| * mips-irix-tdep.c: #include mips-tdep.h, trad-frame.h, and |
| tramp-frame.h. |
| (SIGTRAMP_FRAME_SIZE, SIGCONTEXT_PC_OFF, SIGCONTEXT_REGS_OFF) |
| (SIGCONTEXT_FPREGS_OFF, SIGCONTEXT_FPCSR_OFF, SIGCONTEXT_HI_OFF) |
| (SIGCONTEXT_LO_OFF): New macros. |
| (mips_irix_n32_tramp_frame_init): New function. |
| (mips_irix_n32_tramp_frame): New static constant. |
| (mips_irix_init_abi): Prepend the mips_irix_n32_tramp_frame unwinder. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Breakpoint in shared library does not work on mips-irix. |
| * procfs.c: #include "observer.h". |
| (procfs_inferior_created): New function, moving here the code |
| which unsets the syssgi syscall-exit notifications. |
| (procfs_create_inferior): Remove the code which unsets the syssgi |
| syscall-exit notifications. It is too early to do this here. |
| (_initialize_procfs): Attach the procfs_inferior_created observer. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Wrong return convention for arrays (mips-irix). |
| * mips-tdep.c (mips_n32n64_return_value): Arrays whose size is |
| 128 bits or smaller are returned the same way as structs |
| and unions of the the same size. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Cannot set the PC on mips-irix. |
| * irix5-nat.c (fill_gregset): Check regno against the raw PC |
| register number, no the cooked one. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Error while loading core file on mips-irix. |
| * solib-irix.c (irix_solib_create_inferior_hook): Do nothing |
| if debugging from a core file. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB hangs when attaching to process on mips-irix. |
| * solib-irix.c (irix_solib_create_inferior_hook): Do nothing if |
| attaching to a process. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Use the correct breakpoint instruction on mips-irix. |
| * mips-tdep.c (mips_breakpoint_from_pc): Add new static variable |
| containing the correct breakpoint instruction to use on mips-irix. |
| Use it when the osabi is GDB_OSABI_IRIX. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| -Wunused warning in procfs.c (mips-irix only). |
| * procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them |
| throughout instead of using praddset and prdelset respectively. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB crash while stepping into function. |
| * infrun.c (handle_inferior_event): Refetch the current frame |
| after handling what.main_action, in case that pointer became |
| dangling. |
| |
| 2010-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix build failure of solaris-hosted cross debuggers. |
| * ada-valprint.c, parse.c: Include defs.h before including ctype.h. |
| |
| 2010-01-09 Daniel Gutson <dgutson@codesourcery.com> |
| |
| Fix build failure on sparc-solaris. |
| * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus. |
| |
| 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Move some symfile code into subroutines. |
| * symfile.h (relative_addr_info_to_section_offsets) |
| (addr_info_make_relative): New prototypes. |
| * symfile.c (default_symfile_offsets): Move a part to ... |
| (relative_addr_info_to_section_offsets): ... this new function. |
| (default_symfile_offsets): Call it. |
| (syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move |
| this part to ... |
| (addr_info_make_relative): ... this new function. |
| |
| 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Add from_tty to solib_create_inferior_hook. |
| * infcmd.c (post_create_inferior): Move solib_add after |
| solib_create_inferior_hook. Pass from_tty to |
| solib_create_inferior_hook. Call solib_add and SOLIB_ADD with |
| 0 from_tty and comment why. |
| * infrun.c (follow_exec): Pass from_tty solib_create_inferior_hook as 0. |
| * linux-nat.c (linux_child_follow_fork): Likewise. |
| * nto-procfs.c (procfs_post_attach, procfs_create_inferior): Likewise. |
| * solib-darwin.c (darwin_solib_create_inferior_hook): New parameter |
| from_tty. |
| * solib-frv.c (frv_solib_create_inferior_hook): Likewise. |
| * solib-irix.c (irix_solib_create_inferior_hook): Likewise. |
| * solib-null.c (null_solib_create_inferior_hook): Likewise. |
| * solib-osf.c (osf_solib_create_inferior_hook): Likewise. |
| * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise. |
| * solib-som.c (som_solib_create_inferior_hook): Likewise. |
| * solib-spu.c (spu_solib_create_inferior_hook): New parameter from_tty. |
| Pass it to svr4_so_ops.solib_create_inferior_hook. |
| * solib-sunos.c (sunos_solib_create_inferior_hook): New parameter |
| from_tty. |
| * solib-svr4.c (enable_break): New parameter from_tty. Pass it to |
| solib_add. |
| (svr4_solib_create_inferior_hook): New parameter from_tty. Pass it to |
| enable_break. |
| * solib-target.c (solib_target_solib_create_inferior_hook): New |
| parameter from_tty. |
| * solib.c (solib_create_inferior_hook): New parameter from_tty. Pass |
| it to ops->solib_create_inferior_hook. |
| (reload_shared_libraries): Pass from_tty to solib_create_inferior_hook. |
| Move solib_add after solib_create_inferior_hook, call it now with |
| from_tty as 0. New comment there. |
| * solib.h (solib_create_inferior_hook): New parameter from_tty. |
| * solist.h (struct target_so_ops <solib_create_inferior_hook>): |
| Likewise. |
| |
| 2010-01-08 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Fix multiexec race. |
| * infrun.c (handle_inferior_event): Use get_thread_regcache |
| with events ptid, not get_current_regcache. |
| |
| 2009-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| GDB crash with empty executable name (MinGW). |
| * source.c (openp): Add assert that parameter string is not NULL. |
| if parameter string is an empty string, then return with a failure |
| immediately. |
| |
| 2009-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| Get rid of support for VAX Floats. |
| * ada-lang.h (ada_is_vax_floating_type, ada_vax_float_type_suffix) |
| (ada_vax_float_print_function): Delete. |
| * ada-lang.c (ada_is_vax_floating_type, ada_vax_float_type_suffix) |
| (ada_vax_float_print_function): Delete. |
| * ada-typeprint.c (print_vax_floating_point_type): Delete. |
| (ada_print_type): Remove support for VAX floats. |
| * ada-valprint.c (ada_val_print_1): Remove support for VAX floats. |
| |
| 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * stabsread.c (read_args): Handle zero arguments. |
| |
| 2009-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| Cannot find in-tree libiconv.a after reconfigure. |
| * acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a |
| that we can use, then cache the path to this archive. |
| * configure: Regenerate. |
| |
| 2010-01-07 Stan Shebs <stan@codesourcery.com> |
| |
| Make tracepoint operations go through target vector. |
| * target.h (enum trace_find_type): New enum. |
| (struct target_ops): New fields to_trace_init, |
| to_download_tracepoint, to_download_trace_state_variable, |
| to_trace_set_readonly_regions, to_trace_start, to_get_trace_status, |
| to_trace_stop, to_trace_find, to_get_trace_state_variable_value, |
| to_set_disconnected_tracing. |
| (target_trace_init): New macro. |
| (target_download_tracepoint): New macro. |
| (target_download_trace_state_variable): New macro. |
| (target_trace_start): New macro. |
| (target_trace_set_readonly_regions): New macro. |
| (target_get_trace_status): New macro. |
| (target_trace_stop): New macro. |
| (target_trace_find): New macro. |
| (target_get_trace_state_variable_value): New macro. |
| (target_set_disconnected_tracing): New macro. |
| * target.c (update_current_target): Inherit and set defaults for |
| tracepoint operations. |
| * tracepoint.c (default_collect): Make globally visible. |
| (target_is_remote): Remove, along with all calls. |
| (tvariables_info): Call target_get_trace_state_variable_value. |
| (remote_set_transparent_ranges): Remove. |
| (trace_start_command): Call target_trace_init, |
| target_download_tracepoint, etc. |
| (download_tracepoint): Remove. |
| (trace_stop_command): Simplify. |
| (stop_tracing): Call target_trace_stop. |
| (get_trace_status): Call target_get_trace_status. |
| (trace_status_command): Add case for targets that cannot trace. |
| (finish_tfind_command): Change to take numerical arguments, call |
| target_trace_find. |
| (trace_find_command): Update call to finish_tfind_command. |
| (trace_find_pc_command): Ditto. |
| (trace_find_tracepoint_command): Ditto. |
| (trace_find_line_command): Ditto. |
| (trace_find_range_command): Ditto. |
| (trace_find_outside_command): Ditto. |
| (set_disconnected_tracing_value): Call |
| target_set_disconnected_tracing. |
| * remote.c: Add protocol encoding bits from tracepoint.c. |
| (trace_error): Move from tracepoint.c. |
| (remote_get_noisy_reply): Ditto. |
| (free_actions_list_cleanup_wrapper): Ditto. |
| (free_actions_list): Ditto. |
| (remote_trace_init): New function. |
| (remote_download_tracepoint): New function. |
| (remote_download_trace_state_variable): New function. |
| (remote_trace_set_readonly_regions): New function. |
| (remote_trace_start): New function. |
| (remote_get_trace_status): New function. |
| (remote_trace_stop): New function. |
| (remote_trace_find): New function. |
| (remote_download_trace_state_variable): New function. |
| (remote_set_disconnected_tracing): New function. |
| (init_remote_ops): Add tracepoint operations. |
| |
| * tracepoint.c (trace_dump_command): Don't decr_pc_after_break. |
| |
| 2010-01-07 Tristan Gingold <gingold@adacore.com> |
| |
| * symfile.c (build_section_addr_info_from_objfile): New function. |
| (symbol_file_add_separate): Don't use offsets from objfile but |
| built an addr info. |
| |
| 2010-01-06 Stan Shebs <stan@codesourcery.com> |
| |
| Support disconnected tracing. |
| * infcmd.c (detach_command): Ask whether to stop tracing. |
| * cli/cli-cmds.c (quit_command): Ditto. |
| * breakpoint.h (struct breakpoint): New field number_on_target. |
| * breakpoint.c (create_tracepoint_from_upload): New function. |
| (get_tracepoint_by_number_on_target): New function. |
| * remote.c (struct remote): New field disconnected_tracing. |
| (remote_disconnected_tracing_feature): New function. |
| (remote_protocol_features): Add DisconnectedTracing. |
| (struct uploaded_tp): New struct. |
| (uploaded_tps): New global. |
| (get_uploaded_tp): New function. |
| (find_matching_tracepoint): New function. |
| (remote_get_tracing_state): New function. |
| (remote_start_remote): Call it. |
| * tracepoint.c (disconnected_tracing): New global. |
| (trace_start_command): Initialize number_on_target. |
| (stop_tracing): New function, split out from... |
| (trace_stop_command): Call stop_tracing. |
| (get_trace_status): New function, split out from... |
| (trace_status_command): Call get_trace_status, add info on |
| disconnection behavior. |
| (disconnect_or_stop_tracing): New function. |
| (finish_tfind_command): Translate from number on target. |
| (trace_find_tracepoint_command): Translate to number on target. |
| (send_disconnected_tracing_value): New function. |
| (set_disconnected_tracing): New function. |
| (_initialize_tracepoint): Add disconnected-tracing variable. |
| * NEWS: Mention disconnected tracing. |
| |
| 2010-01-06 Tristan Gingold <gingold@adacore.com> |
| |
| * symtab.c (lookup_global_symbol_from_objfile): Rename objfile |
| parameter to main_objfile. Iterate on all separate debug objfiles. |
| * symfile.h (symbol_file_add_separate) |
| (find_separate_debug_file_by_debuglink): Remove parameter names. |
| * symfile.c (symbol_file_add_separate): Use add_separate_objfile. |
| (reread_symbols): Use free_objfile_separate_debug. |
| * objfiles.h (struct objfile): Add separate_debug_objfile_link. |
| Adjust comment. |
| (objfile_separate_debug_iterate, add_separate_debug_objfile) |
| (free_objfile_separate_debug): New prototypes. |
| * objfiles.c (objfile_separate_debug_iterate): New function. |
| (add_separate_debug_objfile, free_objfile_separate_debug): New |
| functions. |
| (free_objfile): Use free_objfile_separate_debug. Adjust for |
| multiple separate debug objfile. |
| (objfile_has_symbols): Adjust comment. Iterate on all separate |
| debug objfiles. |
| * minsyms.c (lookup_minimal_symbol): Adjust for multiple separate |
| debug objfile. |
| (lookup_minimal_symbol_text): Ditto. |
| (lookup_minimal_symbol_by_pc_name): Ditto. |
| (lookup_minimal_symbol_solib_trampoline): Ditto. |
| (lookup_minimal_symbol_by_pc_section_1): Iterate on all separate |
| debug objfiles. |
| |
| 2010-01-05 Stan Shebs <stan@codesourcery.com> |
| |
| Add fast tracepoints. |
| * arch-utils.h (default_fast_tracepoint_valid_at): Declare. |
| * arch-utils.c (default_fast_tracepoint_valid_at): New function. |
| * breakpoint.h (enum bptype): Add bp_fast_tracepoint. |
| * breakpoint.c (tracepoint_type): New function. |
| (ALL_TRACEPOINTS): Use it. |
| (should_be_inserted): Ditto. |
| (bpstat_check_location): Ditto. |
| (print_one_breakpoint_location): Ditto. |
| (user_settable_breakpoint): Ditto. |
| (set_breakpoint_location_function): Ditto. |
| (disable_breakpoints_in_shlibs): Ditto. |
| (delete_trace_command): Ditto. |
| (print_it_typical): Add bp_fast_tracepoint case. |
| (bpstat_what): Ditto. |
| (print_one_breakpoint_location): Ditto. |
| (allocate_bp_location): Ditto. |
| (mention): Ditto. |
| (breakpoint_re_set_one): Ditto. |
| (disable_command): Ditto. |
| (enable_command): Ditto. |
| (check_fast_tracepoint_sals): New function. |
| (break_command_really): Call it. |
| (ftrace_command): New function. |
| (_initialize_breakpoint): Add ftrace command. |
| * gdbarch.sh (fast_tracepoint_valid_at): New. |
| * gdbarch.h, gdbarch.c: Regenerate. |
| * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. |
| (i386_gdbarch_init): Use it. |
| * remote.c (struct remote_state): New field fast_tracepoints. |
| (PACKET_FastTracepoints): New packet config type. |
| (remote_fast_tracepoint_feature): New function. |
| (remote_protocol_features): Add FastTracepoints. |
| (remote_supports_fast_tracepoints): New function. |
| (_initialize_remote): Add FastTracepoints. |
| * tracepoint.c (download_tracepoint): Add fast tracepoint option. |
| * NEWS: Mention fast tracepoints. |
| |
| 2010-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdb-gdb.py: New file. |
| |
| 2010-01-05 Michael Snyder <msnyder@vmware.com> |
| |
| * infrun.c (handle_inferior_event): Fix typo in comment. |
| |
| 2010-01-05 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * symfile.c (syms_from_objfile): Remove the !MAINLINE conditional. |
| |
| 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * features/Makefile (WHICH): Add s390-linux32, s390-linux64, |
| and s390x-linux64. |
| (s390-linux32-expedite): Define. |
| (s390-linux64-expedite): Define. |
| (s390x-linux64-expedite): Define. |
| * features/s390-acr.xml: New file. |
| * features/s390-fpr.xml: New file. |
| * features/s390-core32.xml: New file. |
| * features/s390-core64.xml: New file. |
| * features/s390x-core64.xml: New file. |
| * features/s390-linux32.xml: New file. |
| * features/s390-linux64.xml: New file. |
| * features/s390x-linux64.xml: New file. |
| * features/s390-linux32.c: New generated file. |
| * features/s390-linux64.c: New generated file. |
| * features/s390x-linux64.c: New generated file. |
| |
| * regformats/s390-linux32.dat: New generated file. |
| * regformats/s390-linux64.dat: New generated file. |
| * regformats/s390x-linux64.dat: New generated file. |
| * regformats/reg-s390.dat: Remove. |
| * regformats/reg-s390x.dat: Remove. |
| |
| * s390-nat.c: Include "auxv.h" and <elf.h>. |
| (HWCAP_S390_HIGH_GPRS): Define if undefined. |
| (s390_target_wordsize): New function. |
| (s390_auxv_parse): Likewise. |
| (s390_get_hwcap): Likewise. |
| (s390_read_description): Likewise. |
| (_initialize_s390_nat): Install s390_auxv_parse and |
| s390_read_description. |
| |
| * s390-tdep.c: Include "features/s390-linux32.c", |
| "features/s390-linux64.c", and "features/s390x-linux64.c". |
| (struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum. |
| (s390_register_call_saved): New function. |
| (s390_register_name): Remove. |
| (s390_register_type): Remove. |
| (s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums. |
| (s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs. |
| (s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI. |
| (s390_pseudo_register_name): New function. |
| (s390_pseudo_register_type): New function. |
| (s390_pseudo_register_read): Handle both 32-bit and 64-bit cases. |
| Handle full GPR pesudos and varying pseudo register numbers. |
| (s390_pseudo_register_write): Likewise |
| (s390x_pseudo_register_read): Remove. |
| (s390x_pseudo_register_write): Likewise. |
| (s390_register_group): Remove. |
| (s390_pseudo_register_group): New function. |
| (s390_regmap_gregset): Add GPR upper halves. |
| (s390x_regmap_gregset): Likewise. |
| (s390_regmap_fpregset): Likewise. |
| (s390_regmap_upper): New global variable. |
| (s390_upper_regset): New global variable. |
| (s390_upper_regset_sections): New global variable. |
| (s390_regset_from_core_section): Handle GPR upper halves. |
| (s390_core_read_description): New function. |
| (s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered |
| register information. Handle varying pseudo register numbers. |
| (s390_backchain_frame_unwind_cache): Likewise. |
| (s390_frame_prev_register): Unwind full GPRs to show lower halves. |
| (s390_stub_frame_unwind_cache): Handle varying pseudo register numbers. |
| (s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as |
| PC and CC pseudos. Unwind upper halves and full GPRs as appropriate. |
| Handle varying pseudo register numbers. |
| (s390_unwind_pc): Handle varying pseudo register numbers. |
| (s390_dwarf2_prev_register): New function. |
| (s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered |
| register information. Handle varying pseudo register numbers. |
| Install s390_dwarf2_prev_register to unwind full GPRs. |
| (s390_gdbarch_init): Handle target descriptions. Assign varying |
| pseudo register numbers. Install s390_adjust_frame_regnum. |
| (_initialize_s390_tdep): Initialize target descriptions. |
| |
| * s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define. |
| (S390_NUM_REGS): Redefine to include upper half registers. |
| (S390_PC_REGNUM, S390_CC_REGNUM): Remove. |
| (S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise. |
| (tdesc_s390_linux32): Add declaration. |
| (tdesc_s390_linux64): Likewise. |
| (tdesc_s390x_linux64): Likewise. |
| |
| 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * regset.h (struct core_regset_section): Add HUMAN_NAME. |
| * i386-linux-tdep.c (i386_linux_regset_sections): Fill in HUMAN_NAME. |
| * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise. |
| (ppc_linux_vmx_regset_sections): Likewise. |
| (ppc_linux_fp_regset_sections): Likewise. |
| |
| * corelow.c (get_core_register_section): Constify arguments. |
| (get_core_registers): Use gdbarch_core_regset_sections instead |
| of hard-coded platform-specific register section names. |
| |
| 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * dwarf2loc.c (read_pieced_value): If a piece occupies part of |
| a register, assume the least-significant part is used. |
| (write_pieced_value): Likewise. |
| |
| 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * printcmd.c: Include "arch-utils.h". |
| (do_one_display): Re-parse expression if current architecture changed. |
| |
| 2010-01-03 Jan Kratochvil <jan.kratochvil@redhat.com> |
| Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.c (check_typedef): New comment on type length. |
| * value.c (allocate_value_lazy): Remove the unused atype variable. New |
| comment on type length. |
| (value_primitive_field): Keep the original TYPE value, new comment. |
| |
| 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * cli/cli-script.c (process_next_line): Rename p1 as p_end and p2 as |
| p_start. Change != comparisons to > and < comparisons. |
| |
| 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * cli/cli-script.c (process_next_line): Check P2 overrun. |
| |
| 2009-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Update the copyright hearder to add year 2010 for most GDB files. |
| |
| 2009-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix build failure in inf-ptrace.c. |
| * inf-ptrace.c (inf_ptrace_follow_fork): Fix typo. |
| |
| 2010-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year. |
| |
| 2010-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix break *FUN'address thread NUM. |
| * ada-lex.l (task): Expand rule to also match the thread keyword. |
| |
| 2010-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Fix break *FUN'address task NUM. |
| * ada-lex.l (task): New rule. |
| * ada-lang.c (valid_task_id): Make sure the Ada task list has |
| been built before using it. |
| |
| For older changes see ChangeLog-2009. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |