| # Copyright 2012, 2013 |
| # Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. |
| |
| # |
| # Some generic MIPS tests |
| # |
| |
| # When adding a new test to this file, try to do the following things: |
| # |
| # * If testing assembly and disassembly of code, don't forget to test |
| # the actual bit encodings of the instructions (using the |
| # --show-raw-insn flag to objdump). |
| # |
| # * Try to run the test for as many architectures as appropriate, |
| # using the "run_dump_test_arches" or "run_list_test_arches" functions, |
| # along with the output from a call to "mips_arch_list_matching." |
| # |
| # * Be sure to compare the test output before and after your testsuite |
| # changes, to verify that existing and new tests were run as expected. |
| # Look for expect ERROR messages in the testsuite .log file to make sure |
| # the new expect code did not contain errors. |
| |
| # To add support for a new CPU to this file, add an appropriate entry |
| # to the sequence of "mips_arch_create" function calls below, and test |
| # the result. The new CPU should automatically be used when running |
| # various tests. If the new CPU is the default CPU for any tool |
| # targets, make sure the call to "mips_arch_create" reflects that fact. |
| |
| |
| # The functions below create and manipulate an "architecture data |
| # array" which contains entries for each MIPS architecture (or CPU) |
| # known to these tests. The array contains the following information |
| # for each architecture, indexed by the name of the architecture |
| # described by the entry: |
| # |
| # displayname: The name of the entry to be used for pretty-printing. |
| # |
| # gprsize: The size in bits of General Purpose Registers provided by |
| # the architecture (must be 32 or 64). |
| # |
| # props: A list of text strings which are associated with the |
| # architecture. These include the architecture name as well as |
| # information about what instructions the CPU supports. When matching |
| # based on properties, an additional property is added to the normal |
| # property list, "gpr<gprsize>" so that tests can match CPUs which |
| # have GPRs of a specific size. The following properties are most |
| # useful when matching properties for generic (i.e., not CPU-specific) |
| # tests: |
| # |
| # mips1, mips2, mips3, mips4, mips5, mips32, mips64 |
| # The architecture includes the instructions defined |
| # by that MIPS ISA. |
| # |
| # fpisa3, fpisa4, fpisa5 |
| # The architecture includes the floating-point |
| # instructions defined by that MIPS ISA. |
| # |
| # gpr_ilocks |
| # The architecture interlocks GPRs accesses. (That is, |
| # there are no load delay slots.) |
| # |
| # mips3d The architecture includes the MIPS-3D ASE. |
| # |
| # ror The architecture includes hardware rotate instructions. |
| # |
| # gpr32, gpr64 |
| # The architecture provides 32- or 64-bit General Purpose |
| # Registers. |
| # |
| # singlefloat |
| # The CPU is 64 bit, but only supports 32 bit FPU. |
| # |
| # nollsc |
| # The CPU doesn't support ll, sc, lld and scd instructions. |
| # |
| # as_flags: The assembler flags used when assembling tests for this |
| # architecture. |
| # |
| # objdump_flags: The objdump flags used when disassembling tests for |
| # this architecture. |
| # |
| # Most entries in the architecture array will have values in all of |
| # the fields above. One entry, "default" represents the default CPU |
| # based on the target of the assembler being built. If always has |
| # empty "as_flags" and "objdump_flags." |
| |
| # mips_arch_init |
| # |
| # This function initializes the architecture data array ("mips_arches") |
| # to be empty. |
| proc mips_arch_init {} { |
| global mips_arches |
| |
| # Catch because the variable won't be set the first time through. |
| catch {unset mips_arches} |
| } |
| |
| # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \ |
| # (optional:) DEFAULT_FOR_TARGETS |
| # |
| # This function creates a new entry in the architecture data array, |
| # for the architecture or CPU named ARCH, and fills in the entry |
| # according to the rest of the arguments. |
| # |
| # The new entry's property list is initialized to contain ARCH, any |
| # properties specified by PROPS, and the properties associated with |
| # the entry specified by EXTENDS. (The new architecture is considered |
| # to extend the capabilities provided by that architecture.) |
| # |
| # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which |
| # this architecture is the default architecture. If "istarget" returns |
| # true for any of the targets in the list, a "default" entry will be |
| # added to the architecture array which indicates that ARCH is the default |
| # architecture. |
| proc mips_arch_create {arch gprsize extends props as_flags objdump_flags |
| {default_for_targets {}}} { |
| global mips_arches |
| |
| if { [info exists mips_arches($arch)] } { |
| error "mips_arch_create: arch \"$arch\" already exists" |
| } |
| if { $gprsize != 32 && $gprsize != 64 } { |
| error "mips_arch_create: invalid GPR size $gprsize" |
| } |
| |
| set archdata(displayname) $arch |
| set archdata(gprsize) $gprsize |
| set archdata(as_flags) $as_flags |
| set archdata(objdump_flags) $objdump_flags |
| set archdata(props) $arch |
| eval lappend archdata(props) $props |
| if { [string length $extends] != 0 } { |
| eval lappend archdata(props) [mips_arch_properties $extends 0] |
| } |
| |
| set mips_arches($arch) [array get archdata] |
| |
| # Set as default if appropriate. |
| foreach target $default_for_targets { |
| if { [istarget $target] } { |
| if { [info exists mips_arches(default)] } { |
| error "mips_arch_create: default arch already exists" |
| } |
| |
| set archdata(displayname) "default = $arch" |
| set archdata(as_flags) "" |
| set archdata(objdump_flags) "" |
| |
| set mips_arches(default) [array get archdata] |
| break |
| } |
| } |
| } |
| |
| # mips_arch_destroy ARCH |
| # |
| # The opposite of the above. This function removes an entry from |
| # the architecture data array, for the architecture or CPU named ARCH. |
| |
| proc mips_arch_destroy {arch} { |
| global mips_arches |
| |
| if { [info exists mips_arches($arch)] } { |
| unset mips_arches($arch) |
| } |
| } |
| |
| # mips_arch_list_all |
| # |
| # This function returns the list of all names of entries in the |
| # architecture data array (including the default entry, if a default |
| # is known). |
| proc mips_arch_list_all {} { |
| global mips_arches |
| return [lsort -dictionary [array names mips_arches]] |
| } |
| |
| # mips_arch_data ARCH |
| # |
| # This function returns the information associated with ARCH |
| # in the architecture data array, in "array get" form. |
| proc mips_arch_data {arch} { |
| global mips_arches |
| |
| if { ! [info exists mips_arches($arch)] } { |
| error "mips_arch_data: unknown arch \"$arch\"" |
| } |
| return $mips_arches($arch) |
| } |
| |
| # mips_arch_displayname ARCH |
| # |
| # This function returns the printable name associated with ARCH in |
| # the architecture data array. |
| proc mips_arch_displayname {arch} { |
| array set archdata [mips_arch_data $arch] |
| return $archdata(displayname) |
| } |
| |
| # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE |
| # |
| # This function returns the property list associated with ARCH in the |
| # architecture data array, including the "canonical" target name as the |
| # first element. |
| # |
| # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64" |
| # property will be returned as part of the list based on the |
| # architecture's GPR size. |
| proc mips_arch_properties {arch {include_gprsize 1}} { |
| array set archdata [mips_arch_data $arch] |
| set props $archdata(props) |
| if { $include_gprsize } { |
| lappend props gpr$archdata(gprsize) |
| } |
| return $props |
| } |
| |
| # mips_arch_as_flags ARCH |
| # |
| # This function returns the assembler flags associated with ARCH in |
| # the architecture data array. |
| proc mips_arch_as_flags {arch} { |
| array set archdata [mips_arch_data $arch] |
| return $archdata(as_flags) |
| } |
| |
| # mips_arch_objdump_flags ARCH |
| # |
| # This function returns the objdump disassembly flags associated with |
| # ARCH in the architecture data array. |
| proc mips_arch_objdump_flags {arch} { |
| array set archdata [mips_arch_data $arch] |
| return $archdata(objdump_flags) |
| } |
| |
| # mips_arch_matches ARCH PROPMATCHLIST |
| # |
| # This function returns non-zero if ARCH matches the set of properties |
| # described by PROPMATCHLIST. Each entry in PROPMATCHLIST can either |
| # be the name of a property which must be matched, or "!" followed by |
| # the name of a property which must not be matched. ARCH matches |
| # PROPMATCHLIST if and only if all of the conditions specified by |
| # PROPMATCHLIST are satisfied. |
| proc mips_arch_matches {arch propmatchlist} { |
| foreach pm $propmatchlist { |
| if { [string match {!*} $pm] } { |
| # fail if present. |
| set inverted 1 |
| set p [string range $pm 1 end] |
| } { |
| # fail if not present. |
| set inverted 0 |
| set p $pm |
| } |
| |
| set loc [lsearch -exact [mips_arch_properties $arch] $p] |
| |
| # required-absent and found, or required-present and not found: fail. |
| if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } { |
| return 0 |
| } |
| } |
| return 1 |
| } |
| |
| # mips_arch_list_matching ARGS |
| # |
| # This function returns a list of all architectures which match |
| # the conditions described by its arguments. Its arguments are |
| # taken as a list and used as the PROPMATCHLIST in a call to |
| # "mips_arch_matches" for each known architecture. |
| proc mips_arch_list_matching {args} { |
| set l "" |
| foreach arch [mips_arch_list_all] { |
| # For now, don't match default arch until we know what its |
| # properties actually are. |
| if { [string compare $arch default] == 0 |
| && [string length [mips_arch_properties default]] == 0} { |
| continue |
| } |
| if { [mips_arch_matches $arch $args] } { |
| lappend l $arch |
| } |
| } |
| return $l |
| } |
| |
| |
| # The functions below facilitate running various types of tests. |
| |
| # run_dump_test_arch NAME OPTS ARCH |
| # |
| # Invoke "run_dump_test" for test NAME with additional assembler options OPTS. |
| # Add the assembler and disassembler flags that are associated with |
| # architecture ARCH. |
| # |
| # You can override the expected output for particular architectures. |
| # The possible test names are, in order of preference: |
| # |
| # 1. CARCH@NAME.d |
| # 2. NAME.d |
| # |
| # where CARCH is the "canonical" name of architecture ARCH as recorded |
| # in its associated property list. |
| proc run_dump_test_arch { name opts arch } { |
| global subdir srcdir |
| |
| set proparch [lindex [mips_arch_properties $arch 0] 0] |
| set prefixes [list ${proparch}@ ] |
| if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } { |
| lappend prefixes octeon@ |
| } |
| foreach prefix ${prefixes} { |
| set archname ${prefix}${name} |
| if { [file exists "$srcdir/$subdir/${archname}.d"] } { |
| set name $archname |
| break |
| } |
| } |
| |
| if [catch {run_dump_test $name \ |
| "{name {([concat $opts [mips_arch_displayname $arch]])}} |
| {objdump {[mips_arch_objdump_flags $arch]}} |
| {as {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] { |
| perror "$rv" |
| untested "$subdir/$name ($arch)" |
| } |
| } |
| |
| # run_dump_test_arches NAME [OPTS] ARCH_LIST |
| # |
| # Invoke "run_dump_test_arch" for test NAME, for each architecture |
| # listed in ARCH_LIST. OPTS, if specified, is a list of additional |
| # assembler options that should be used for all architectures. |
| proc run_dump_test_arches { name args } { |
| set opts "" |
| if { [llength $args] > 1 } { |
| set opts [lindex $args 0] |
| set args [lrange $args 1 end] |
| } |
| set arch_list [lindex $args 0] |
| foreach arch $arch_list { |
| run_dump_test_arch $name $opts $arch |
| } |
| } |
| |
| # run_list_test_arch NAME OPTS ARCH |
| # |
| # Invoke "run_list_test" for test NAME with additional assembler options OPTS. |
| # Add the assembler flags that are associated with architecture ARCH. |
| proc run_list_test_arch { name opts arch } { |
| global subdir |
| |
| set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])" |
| if [catch {run_list_test \ |
| $name \ |
| [concat $opts [mips_arch_as_flags $arch]] \ |
| $testname} rv] { |
| perror "$rv" |
| untested "$testname" |
| } |
| } |
| |
| # run_list_test_arches NAME [OPTS] ARCH_LIST |
| # |
| # Invoke "run_list_test_arch" for test NAME, for each architecture listed |
| # in ARCH_LIST. OPTS, if specified, is a list of additional assembler |
| # options that should be used for all architectures. |
| proc run_list_test_arches { name args } { |
| set opts "" |
| if { [llength $args] > 1 } { |
| set opts [lindex $args 0] |
| set args [lrange $args 1 end] |
| } |
| set arch_list [lindex $args 0] |
| foreach arch $arch_list { |
| run_list_test_arch "$name" "$opts" "$arch" |
| } |
| } |
| |
| |
| # Create the architecture data array by providing data for all |
| # known architectures. |
| # |
| # Note that several targets pick default CPU based on ABI. We |
| # can't easily handle that; do NOT list those targets as defaulting |
| # to any architecture. |
| mips_arch_init |
| mips_arch_create mips1 32 {} {} \ |
| { -march=mips1 -mtune=mips1 } { -mmips:3000 } |
| mips_arch_create mips2 32 mips1 { gpr_ilocks } \ |
| { -march=mips2 -mtune=mips2 } { -mmips:6000 } |
| mips_arch_create mips3 64 mips2 { fpisa3 } \ |
| { -march=mips3 -mtune=mips3 } { -mmips:4000 } |
| mips_arch_create mips4 64 mips3 { fpisa4 } \ |
| { -march=mips4 -mtune=mips4 } { -mmips:8000 } |
| mips_arch_create mips5 64 mips4 { fpisa5 } \ |
| { -march=mips5 -mtune=mips5 } { -mmips:mips5 } |
| mips_arch_create mips32 32 mips2 {} \ |
| { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \ |
| { mipsisa32-*-* mipsisa32el-*-* } |
| mips_arch_create mips32r2 32 mips32 { fpisa3 fpisa4 fpisa5 ror } \ |
| { -march=mips32r2 -mtune=mips32r2 } \ |
| { -mmips:isa32r2 } \ |
| { mipsisa32r2-*-* mipsisa32r2el-*-* } |
| mips_arch_create mips64 64 mips5 { mips32 } \ |
| { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \ |
| { mipsisa64-*-* mipsisa64el-*-* } |
| mips_arch_create mips64r2 64 mips64 { mips32r2 ror } \ |
| { -march=mips64r2 -mtune=mips64r2 } \ |
| { -mmips:isa64r2 } \ |
| { mipsisa64r2-*-* mipsisa64r2el-*-* } |
| mips_arch_create mips16 32 {} {} \ |
| { -march=mips1 -mips16 } { -mmips:16 } |
| mips_arch_create micromips 64 mips64r2 {} \ |
| { -march=mips64 -mmicromips } {} |
| mips_arch_create r3000 32 mips1 {} \ |
| { -march=r3000 -mtune=r3000 } { -mmips:3000 } |
| mips_arch_create r3900 32 mips1 { gpr_ilocks } \ |
| { -march=r3900 -mtune=r3900 } { -mmips:3900 } \ |
| { mipstx39-*-* mipstx39el-*-* } |
| mips_arch_create r4000 64 mips3 {} \ |
| { -march=r4000 -mtune=r4000 } { -mmips:4000 } |
| mips_arch_create vr5400 64 mips4 { ror } \ |
| { -march=vr5400 -mtune=vr5400 } { -mmips:5400 } |
| mips_arch_create sb1 64 mips64 { mips3d } \ |
| { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \ |
| { mipsisa64sb1-*-* mipsisa64sb1el-*-* } |
| mips_arch_create octeon 64 mips64r2 {} \ |
| { -march=octeon -mtune=octeon } { -mmips:octeon } \ |
| { mips64octeon*-*-* } |
| mips_arch_create octeonp 64 octeon {} \ |
| { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \ |
| { } |
| mips_arch_create octeon2 64 octeonp {} \ |
| { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \ |
| { } |
| mips_arch_create xlr 64 mips64 {} \ |
| { -march=xlr -mtune=xlr } { -mmips:xlr } |
| mips_arch_create r5900 64 mips3 { gpr_ilocks singlefloat nollsc } \ |
| { -march=r5900 -mtune=r5900 } { -mmips:5900 } \ |
| { mipsr5900el-*-* mips64r5900el-*-* } |
| |
| # |
| # And now begin the actual tests! VxWorks uses RELA rather than REL |
| # relocations, so most of the generic dump tests will not work there. |
| # |
| if { [istarget mips*-*-vxworks*] } { |
| run_dump_test "vxworks1" |
| run_dump_test "vxworks1-xgot" |
| run_dump_test "vxworks1-el" |
| run_dump_test "vxworks1-xgot-el" |
| } elseif { [istarget mips*-*-*] } { |
| set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*]] |
| set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] || [istarget mips*-sde-elf*]] |
| |
| if { [istarget "mips*-*-*linux*"] |
| || [istarget "mips*-sde-elf*"] |
| || [istarget "mips*-*-*bsd*"] } then { |
| set tmips "t" |
| } else { |
| set tmips "" |
| } |
| if [istarget mips*el-*-*] { |
| set el "el" |
| } { |
| set el "" |
| } |
| |
| run_dump_test_arches "dot-1" [mips_arch_list_matching mips1] |
| run_dump_test_arches "abs" [mips_arch_list_matching mips1] |
| run_dump_test_arches "add" [mips_arch_list_matching mips1] |
| run_dump_test_arches "and" [mips_arch_list_matching mips1] |
| run_dump_test_arches "mips1-fp" [mips_arch_list_matching mips1] |
| run_list_test_arches "mips1-fp" "-32 -msoft-float" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test "break20" |
| run_dump_test "trap20" |
| |
| run_dump_test_arches "beq" [mips_arch_list_matching mips1] |
| run_dump_test_arches "bge" [mips_arch_list_matching mips1] |
| run_dump_test_arches "bgeu" [mips_arch_list_matching mips1] |
| run_dump_test_arches "blt" [mips_arch_list_matching mips1] |
| run_dump_test_arches "bltu" [mips_arch_list_matching mips1] |
| run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2] |
| run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1] |
| run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1] |
| run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1] |
| run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3] |
| run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3] |
| run_dump_test "branch-misc-3" |
| run_dump_test "branch-swap" |
| |
| # Sweep a range of branch offsets so that it hits a position where |
| # it is at the beginning of a frag and then swapped with a 16-bit |
| # instruction from the preceding frag. The offset will be somewhere |
| # close below 4096 as this is the default obstack size limit that |
| # we use and some space will have been already consumed. The exact |
| # amount depends on the host's programming model. |
| for { set count 960 } { $count <= 1024 } { incr count } { |
| run_list_test "branch-swap-2" "--defsym count=$count" \ |
| "MIPS branch swapping ($count)" |
| } |
| |
| run_dump_test "div" |
| |
| if { !$addr32 } { |
| run_dump_test_arches "dli" [mips_arch_list_matching mips3] |
| } |
| run_dump_test_arches "jal" [mips_arch_list_matching mips1] |
| run_dump_test_arches "jal-mask-11" [mips_arch_list_matching mips1] |
| run_dump_test_arches "jal-mask-12" [mips_arch_list_matching mips1] |
| run_dump_test_arches "jal-mask-21" [mips_arch_list_matching micromips] |
| run_dump_test_arches "jal-mask-22" [mips_arch_list_matching micromips] |
| run_dump_test "eret-1" |
| run_dump_test "eret-2" |
| run_dump_test "eret-3" |
| run_dump_test_arches "24k-branch-delay-1" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test_arches "24k-triple-stores-1" \ |
| [mips_arch_list_matching fpisa5 !octeon] |
| run_dump_test_arches "24k-triple-stores-2" \ |
| [mips_arch_list_matching mips2] |
| run_dump_test_arches "24k-triple-stores-2-llsc" \ |
| [mips_arch_list_matching mips2 !nollsc] |
| run_dump_test_arches "24k-triple-stores-3" \ |
| [mips_arch_list_matching mips2] |
| run_dump_test_arches "24k-triple-stores-4" \ |
| [mips_arch_list_matching mips2 !singlefloat] |
| run_dump_test_arches "24k-triple-stores-5" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test_arches "24k-triple-stores-6" \ |
| [mips_arch_list_matching mips2 !singlefloat] |
| run_dump_test_arches "24k-triple-stores-7" \ |
| [mips_arch_list_matching mips2 !singlefloat] |
| run_dump_test_arches "24k-triple-stores-8" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test_arches "24k-triple-stores-9" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test_arches "24k-triple-stores-10" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test_arches "24k-triple-stores-11" \ |
| [mips_arch_list_matching mips1] |
| |
| run_dump_test_arches "jal-svr4pic" [mips_arch_list_matching mips1] |
| run_dump_test_arches "jal-svr4pic-noreorder" \ |
| [mips_arch_list_matching mips1] |
| run_dump_test "jal-xgot" |
| run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1] |
| if $has_newabi { run_dump_test "jal-newabi" } |
| run_dump_test "la" |
| run_dump_test "la-svr4pic" |
| run_dump_test "la-xgot" |
| run_dump_test "lca-svr4pic" |
| run_dump_test "lca-xgot" |
| # XXX FIXME: Has mips2 and later insns with mips1 disassemblies. |
| # (Should split and then use appropriate arch lists.) |
| run_dump_test_arches "lb" [mips_arch_list_matching mips1 !mips2] |
| run_dump_test_arches "lb-svr4pic" \ |
| [mips_arch_list_matching mips1 !gpr_ilocks] |
| run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks] |
| # Both versions specify the cpu, so we can run both regardless of |
| # the interlocking in the configured default cpu. |
| run_dump_test "lb-xgot" |
| run_dump_test "lb-xgot-ilocks" |
| run_dump_test_arches "ld" [mips_arch_list_matching mips1] |
| run_dump_test_arches "ld-forward" [mips_arch_list_matching mips1] |
| run_dump_test_arches "sd" [mips_arch_list_matching mips1] |
| run_dump_test_arches "sd-forward" [mips_arch_list_matching mips1] |
| run_dump_test_arches "l_d" [mips_arch_list_matching mips1 !singlefloat] |
| run_dump_test_arches "l_d-single" [mips_arch_list_matching mips1 singlefloat] |
| run_dump_test_arches "l_d-forward" [mips_arch_list_matching mips1 !singlefloat] |
| run_dump_test_arches "s_d" [mips_arch_list_matching mips1 !singlefloat] |
| run_dump_test_arches "s_d-single" [mips_arch_list_matching mips1 singlefloat] |
| run_dump_test_arches "s_d-forward" [mips_arch_list_matching mips1 !singlefloat] |
| run_dump_test_arches "ldc1" [mips_arch_list_matching mips2 !singlefloat] |
| run_dump_test_arches "ldc1-forward" [mips_arch_list_matching mips2 !singlefloat] |
| run_dump_test_arches "sdc1" [mips_arch_list_matching mips2 !singlefloat] |
| run_dump_test_arches "sdc1-forward" [mips_arch_list_matching mips2 !singlefloat] |
| if $has_newabi { |
| run_dump_test_arches "ld-n32" [mips_arch_list_matching mips3] |
| run_dump_test_arches "ld-forward-n32" \ |
| [mips_arch_list_matching mips3] |
| run_dump_test_arches "sd-n32" [mips_arch_list_matching mips3] |
| run_dump_test_arches "sd-forward-n32" \ |
| [mips_arch_list_matching mips3] |
| run_dump_test_arches "l_d-n32" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "l_d-forward-n32" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "s_d-n32" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "s_d-forward-n32" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "ldc1-n32" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "ldc1-forward-n32" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "sdc1-n32" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "sdc1-forward-n32" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "ld-n64" [mips_arch_list_matching mips3] |
| run_dump_test_arches "ld-forward-n64" \ |
| [mips_arch_list_matching mips3] |
| run_dump_test_arches "sd-n64" [mips_arch_list_matching mips3] |
| run_dump_test_arches "sd-forward-n64" \ |
| [mips_arch_list_matching mips3] |
| run_dump_test_arches "l_d-n64" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "l_d-forward-n64" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "s_d-n64" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "s_d-forward-n64" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "ldc1-n64" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "ldc1-forward-n64" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "sdc1-n64" [mips_arch_list_matching mips3 !singlefloat] |
| run_dump_test_arches "sdc1-forward-n64" \ |
| [mips_arch_list_matching mips3 !singlefloat] |
| } |
| run_dump_test_arches "ld-zero" [mips_arch_list_matching mips1] |
| run_dump_test_arches "ld-zero-2" [mips_arch_list_matching mips2 !nollsc] |
| run_dump_test_arches "ld-zero-3" [mips_arch_list_matching mips3 !nollsc] |
| run_dump_test_arches "ld-zero-u" [mips_arch_list_matching micromips] |
| run_dump_test_arches "ld-zero-q" [mips_arch_list_matching r5900] |
| run_dump_test "ld-svr4pic" |
| run_dump_test "ld-xgot" |
| run_dump_test_arches "li" [mips_arch_list_matching mips1] |
| run_dump_test "lifloat" |
| run_dump_test "lif-svr4pic" |
| run_dump_test "lif-xgot" |
| run_dump_test_arches "mips4" [mips_arch_list_matching mips4] |
| run_dump_test_arches "mips4-fp" "-32" \ |
| [mips_arch_list_matching fpisa4] |
| run_dump_test_arches "mips4-fp" "-mabi=o64" \ |
| [mips_arch_list_matching fpisa4 gpr64] |
| run_list_test_arches "mips4-fp" "-32 -msoft-float" \ |
| [mips_arch_list_matching fpisa4] |
| run_dump_test_arches "mips4-branch-likely" \ |
| [mips_arch_list_matching mips4] |
| run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \ |
| [mips_arch_list_matching mips4] |
| run_dump_test_arches "mips5-fp" "-32" \ |
| [mips_arch_list_matching fpisa5] |
| run_dump_test_arches "mips5-fp" "-mabi=o64" \ |
| [mips_arch_list_matching fpisa5 gpr64] |
| run_dump_test "mul" |
| |
| run_dump_test_arches "rol" [mips_arch_list_matching mips1 !ror] |
| run_dump_test_arches "rol-hw" [mips_arch_list_matching ror] |
| |
| run_dump_test_arches "rol64" [mips_arch_list_matching gpr64 !ror] |
| run_dump_test_arches "rol64-hw" [mips_arch_list_matching gpr64 ror] |
| |
| run_dump_test "sb" |
| run_dump_test "trunc" |
| run_dump_test "ulh" |
| run_dump_test_arches "ulh2-eb" [mips_arch_list_matching mips1] |
| run_dump_test_arches "ulh2-el" [mips_arch_list_matching mips1] |
| run_dump_test "ulh-svr4pic" |
| run_dump_test "ulh-xgot" |
| run_dump_test "ulw" |
| run_dump_test "uld" |
| run_dump_test "ush" |
| run_dump_test "usw" |
| run_dump_test "usd" |
| run_dump_test_arches "ulw2-eb" [mips_arch_list_matching mips1 !gpr_ilocks] |
| run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks] |
| run_dump_test_arches "ulw2-el" [mips_arch_list_matching mips1 !gpr_ilocks] |
| run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks] |
| |
| run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3] |
| run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3] |
| |
| run_dump_test "mips16" |
| run_dump_test "mips16-64" |
| # Check MIPS16e extensions |
| run_dump_test_arches "mips16e" [mips_arch_list_matching mips32 !micromips] |
| # Check jalx handling |
| run_dump_test "mips16-jalx" |
| run_dump_test "mips-jalx" |
| run_dump_test "mips-jalx-2" |
| # Check MIPS16 HI16/LO16 relocations |
| run_dump_test "mips16-hilo" |
| if $has_newabi { |
| run_dump_test "mips16-hilo-n32" |
| } |
| run_dump_test "mips16-hilo-match" |
| run_dump_test "delay" |
| run_dump_test "nodelay" |
| run_dump_test "mips4010" |
| run_dump_test "mips4650" |
| run_dump_test "mips4100" |
| run_dump_test "vr4111" |
| run_dump_test "vr4120" |
| run_dump_test "vr4120-2" |
| run_dump_test "vr4130" |
| run_dump_test "vr5400" |
| run_list_test "vr5400-ill" "-march=vr5400" |
| run_dump_test "vr5500" |
| run_dump_test "rm7000" |
| run_dump_test "perfcount" |
| run_dump_test "lineno" |
| run_dump_test "sync" |
| |
| run_dump_test_arches "virt" [mips_arch_list_matching mips32r2] |
| run_dump_test_arches "virt64" [mips_arch_list_matching mips64r2] |
| |
| run_dump_test_arches "mips32" [mips_arch_list_matching mips32] |
| run_dump_test_arches "mips32-imm" [mips_arch_list_matching mips32] |
| |
| run_dump_test_arches "mips32-sf32" [mips_arch_list_matching mips32] |
| run_list_test_arches "mips32-sf32" "-32 -msoft-float" \ |
| [mips_arch_list_matching mips32] |
| run_dump_test_arches "mips32-cp2" [mips_arch_list_matching mips32 \ |
| !octeon] |
| |
| run_dump_test_arches "mips32r2" [mips_arch_list_matching mips32r2] |
| run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \ |
| !octeon] |
| run_dump_test_arches "mips32r2-fp32" \ |
| [mips_arch_list_matching mips32r2] |
| run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \ |
| [mips_arch_list_matching mips32r2] |
| run_list_test_arches "mips32r2-ill" "-32" \ |
| [mips_arch_list_matching mips32r2 gpr32] |
| run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \ |
| [mips_arch_list_matching mips32r2 gpr64] |
| run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \ |
| [mips_arch_list_matching mips32r2] |
| |
| run_dump_test_arches "mips64" [mips_arch_list_matching mips64] |
| run_dump_test_arches "mips64-cp2" [mips_arch_list_matching mips64 \ |
| !octeon] |
| |
| run_dump_test_arches "mips64r2" [mips_arch_list_matching mips64r2] |
| run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2] |
| |
| run_dump_test "set-arch" |
| |
| if { !$addr32 } { |
| run_dump_test "mips64-mips3d" |
| run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d] |
| |
| run_dump_test "mips64-mdmx" |
| run_dump_test "sb1-ext-mdmx" |
| run_dump_test "sb1-ext-ps" |
| run_dump_test "xlr-ext" |
| } |
| |
| run_dump_test_arches "relax" [mips_arch_list_matching mips2] |
| run_dump_test_arches "relax-at" [mips_arch_list_matching mips2] |
| run_dump_test "relax-swap1-mips1" |
| run_dump_test "relax-swap1-mips2" |
| run_dump_test "relax-swap2" |
| run_dump_test_arches "relax-swap3" [mips_arch_list_all] |
| run_list_test_arches "relax-bc1any" "-mips3d -relax-branch" \ |
| [mips_arch_list_matching mips64 \ |
| !micromips] |
| run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \ |
| [mips_arch_list_matching mips64r2 \ |
| !micromips] |
| |
| run_dump_test_arches "eva" [mips_arch_list_matching mips32r2 !octeon] |
| |
| run_list_test "illegal" "-32" |
| run_list_test "baddata1" "-32" |
| run_list_test "jalr" "" |
| |
| run_dump_test "mips-gp32-fp32" |
| run_dump_test "mips-gp32-fp64" |
| run_dump_test "mips-gp64-fp32" |
| run_dump_test "mips-gp64-fp64" |
| |
| # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file |
| # containing 4650-specific instructions with -m4650 and -mcpu=4650, |
| # and verify that they're the same. Specifically, we're checking |
| # that the EF_MIPS_MACH field is set, and that the 4650 'mul' |
| # instruction does get used. In previous versions of GAS, |
| # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't. |
| run_dump_test "elf_e_flags1" |
| run_dump_test "elf_e_flags2" |
| run_dump_test "elf_e_flags3" |
| run_dump_test "elf_e_flags4" |
| |
| # Check EF_MIPS_ARCH markings for each supported architecture. |
| run_dump_test "elf_arch_mips1" |
| run_dump_test "elf_arch_mips2" |
| run_dump_test "elf_arch_mips3" |
| run_dump_test "elf_arch_mips4" |
| run_dump_test "elf_arch_mips5" |
| run_dump_test "elf_arch_mips32" |
| run_dump_test "elf_arch_mips32r2" |
| run_dump_test "elf_arch_mips64" |
| run_dump_test "elf_arch_mips64r2" |
| |
| # Verify that ASE markings are handled properly. |
| run_dump_test "elf_ase_mips16" |
| run_dump_test "elf_ase_mips16-2" |
| |
| run_dump_test "elf_ase_micromips" |
| run_dump_test "elf_ase_micromips-2" |
| |
| run_dump_test "mips-gp32-fp32-pic" |
| run_dump_test "mips-gp32-fp64-pic" |
| run_dump_test "mips-gp64-fp32-pic" |
| run_dump_test "mips-gp64-fp64-pic" |
| |
| run_dump_test "mips-abi32" |
| run_dump_test "mips-abi32-pic" |
| run_dump_test "mips-abi32-pic2" |
| |
| run_dump_test "elf${el}-rel" |
| run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64 !singlefloat] |
| run_dump_test "e32${el}-rel2" |
| run_dump_test "elf${el}-rel3" |
| run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64] |
| run_dump_test "e32-rel4" |
| run_dump_test "elf-rel5" |
| run_dump_test "elf-rel6" |
| if $has_newabi { |
| run_dump_test "elf-rel6-n32" |
| run_dump_test "elf-rel6-n64" |
| } |
| run_dump_test "elf-rel7" |
| run_dump_test "elf-rel8" |
| run_dump_test "elf-rel8-mips16" |
| run_dump_test "elf-rel9" |
| run_dump_test "elf-rel9-mips16" |
| if $has_newabi { |
| run_dump_test "elf-rel10" |
| run_dump_test "elf-rel11" |
| } |
| run_dump_test "elf-rel12" |
| run_dump_test "elf-rel13" |
| run_dump_test "elf-rel13-mips16" |
| run_dump_test "elf-rel14" |
| |
| if $has_newabi { |
| run_dump_test "elf-rel15" |
| run_dump_test "elf-rel16" |
| |
| run_dump_test "elf-rel-got-n32" |
| run_dump_test "elf-rel-xgot-n32" |
| run_dump_test "elf-rel-got-n64" |
| run_dump_test "elf-rel-xgot-n64" |
| } |
| run_dump_test "elf-rel17" |
| if $has_newabi { |
| run_dump_test "elf-rel18" |
| } |
| run_dump_test "elf-rel19" |
| run_dump_test "elf-rel20" |
| if $has_newabi { |
| run_dump_test "elf-rel21" |
| run_dump_test "elf-rel22" |
| run_dump_test "elf-rel23" |
| run_dump_test "elf-rel23a" |
| run_dump_test "elf-rel23b" |
| run_dump_test "elf-rel24" |
| } |
| |
| run_dump_test "elf-rel25" |
| run_dump_test "elf-rel25a" |
| run_dump_test "elf-rel26" |
| |
| run_dump_test_arches "elf-rel27" [mips_arch_list_all] |
| |
| if $has_newabi { |
| run_dump_test "elf-rel28-n32" |
| run_dump_test "elf-rel28-n64" |
| run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3] |
| } |
| run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all] |
| |
| run_dump_test "${tmips}mips${el}16-e" |
| run_dump_test "${tmips}mips${el}16-f" |
| |
| run_dump_test "elf-consthilo" |
| run_dump_test "expr1" |
| |
| run_list_test "tls-ill" "-32" |
| run_dump_test "tls-o32" |
| run_dump_test "tls-relw" |
| run_dump_test "jalr2" |
| run_dump_test_arches "jalr3" [mips_arch_list_matching mips1 \ |
| !micromips] |
| if $has_newabi { |
| run_dump_test_arches "jalr3-n32" \ |
| [mips_arch_list_matching mips3 \ |
| !micromips] |
| run_dump_test_arches "jalr3-n64" \ |
| [mips_arch_list_matching mips3 \ |
| !micromips] |
| } |
| |
| run_dump_test_arches "aent" [mips_arch_list_matching mips1] |
| |
| run_dump_test_arches "branch-misc-4" [mips_arch_list_matching mips1] |
| run_dump_test_arches "branch-misc-4-64" [mips_arch_list_matching mips3] |
| |
| run_dump_test_arches "loc-swap" [mips_arch_list_all] |
| run_dump_test_arches "loc-swap-dis" [mips_arch_list_all] |
| run_dump_test_arches "loc-swap-2" [mips_arch_list_all] |
| run_dump_test_arches "loc-swap-3" [mips_arch_list_all] |
| |
| if $has_newabi { |
| run_dump_test "n32-consec" |
| } |
| |
| # tests of objdump's ability to disassemble using different |
| # register names. |
| run_dump_test "gpr-names-numeric" |
| run_dump_test "gpr-names-32" |
| run_dump_test "gpr-names-n32" |
| run_dump_test "gpr-names-64" |
| |
| run_dump_test "fpr-names-numeric" |
| run_dump_test "fpr-names-32" |
| run_dump_test "fpr-names-n32" |
| run_dump_test "fpr-names-64" |
| |
| run_dump_test "cp0-names-numeric" |
| run_dump_test "cp0-names-r3000" |
| run_dump_test "cp0-names-r4000" \ |
| { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } } |
| run_dump_test "cp0-names-r4000" \ |
| { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } } |
| run_dump_test "cp0-names-mips32" |
| run_dump_test "cp0-names-mips32r2" |
| run_dump_test "cp0-names-mips64" |
| run_dump_test "cp0-names-mips64r2" |
| run_dump_test "cp0-names-sb1" |
| |
| run_dump_test "cp0sel-names-numeric" |
| run_dump_test "cp0sel-names-mips32" |
| run_dump_test "cp0sel-names-mips32r2" |
| run_dump_test "cp0sel-names-mips64" |
| run_dump_test "cp0sel-names-mips64r2" |
| run_dump_test "cp0sel-names-sb1" |
| |
| run_dump_test "hwr-names-numeric" |
| run_dump_test "hwr-names-mips32r2" |
| run_dump_test "hwr-names-mips64r2" |
| |
| run_dump_test "ldstla-32" |
| run_dump_test "ldstla-32-mips3" |
| run_dump_test "ldstla-32-shared" |
| run_dump_test "ldstla-32-mips3-shared" |
| run_list_test "ldstla-32-1" "-mabi=32" \ |
| "MIPS ld-st-la bad constants (ABI o32)" |
| run_list_test "ldstla-32-mips3-1" "-mabi=32" \ |
| "MIPS ld-st-la bad constants (ABI o32, mips3)" |
| run_list_test "ldstla-32-1" "-KPIC -mabi=32" \ |
| "MIPS ld-st-la bad constants (ABI o32, shared)" |
| run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \ |
| "MIPS ld-st-la bad constants (ABI o32, mips3, shared)" |
| run_dump_test "ldstla-eabi64" |
| if $has_newabi { |
| run_dump_test "ldstla-n64" |
| run_dump_test "ldstla-n64-shared" |
| run_dump_test "ldstla-n64-sym32" |
| } |
| |
| run_dump_test "macro-warn-1" |
| run_dump_test "macro-warn-2" |
| run_dump_test "macro-warn-3" |
| run_dump_test "macro-warn-4" |
| if $has_newabi { |
| run_dump_test "macro-warn-1-n32" |
| run_dump_test "macro-warn-2-n32" |
| } |
| |
| run_dump_test "noat-1" |
| run_list_test "noat-2" "" |
| run_list_test "noat-3" "" |
| run_list_test "noat-4" "" |
| run_list_test "noat-5" "" |
| run_list_test "noat-6" "" |
| run_list_test "noat-7" "" |
| |
| run_dump_test "at-1" |
| run_list_test "at-2" "-32 -mips1" "MIPS at-2" |
| |
| run_dump_test "loongson-2e" |
| run_dump_test "loongson-2f" |
| run_dump_test "loongson-2f-2" |
| run_dump_test "loongson-2f-3" |
| |
| run_dump_test "loongson-3a" |
| run_dump_test "loongson-3a-2" |
| run_dump_test "loongson-3a-3" |
| |
| run_dump_test_arches "octeon" [mips_arch_list_matching octeon] |
| run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp] |
| run_list_test_arches "octeon-ill" [mips_arch_list_matching octeon] |
| run_dump_test_arches "octeon-pref" [mips_arch_list_matching octeon] |
| run_dump_test_arches "octeon2" [mips_arch_list_matching octeon2] |
| |
| run_dump_test "smartmips" |
| run_dump_test_arches "mips32-dsp" [mips_arch_list_matching mips32r2 \ |
| !octeon] |
| run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \ |
| !octeon] |
| run_dump_test "mips64-dsp" |
| run_dump_test "mips32-mt" |
| |
| run_dump_test "mips16-dwarf2" |
| if $has_newabi { |
| run_dump_test "mips16-dwarf2-n32" |
| } |
| run_dump_test "mips16-stabs" |
| |
| run_dump_test "mips16e-jrc" |
| run_dump_test "mips16e-save" |
| run_dump_test "mips16e-64" |
| run_list_test "mips16e-64" "-march=mips32 -32" |
| run_dump_test "mips16-intermix" |
| |
| run_dump_test "vxworks1" |
| run_dump_test "vxworks1-xgot" |
| run_dump_test "vxworks1-el" |
| run_dump_test "vxworks1-xgot-el" |
| |
| run_dump_test "noreorder" |
| run_dump_test "align" |
| run_dump_test "align2" |
| run_dump_test "align2-el" |
| run_dump_test "align3" |
| run_dump_test "odd-float" |
| run_dump_test "ehword" |
| |
| run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \ |
| [mips_arch_list_matching mips2] |
| run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \ |
| [mips_arch_list_matching mips2] |
| |
| run_list_test_arches "mips-hard-float-flag" \ |
| "-32 -msoft-float -mhard-float" \ |
| [mips_arch_list_matching mips1 !singlefloat] |
| run_list_test_arches "mips-double-float-flag" \ |
| "-32 -msingle-float -mdouble-float" \ |
| [mips_arch_list_matching mips1 !singlefloat] |
| |
| run_dump_test "mips16-vis-1" |
| run_dump_test "call-nonpic-1" |
| run_dump_test "mips32-sync" |
| run_dump_test_arches "mips32r2-sync" \ |
| [mips_arch_list_matching mips32r2] |
| run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5] |
| run_dump_test_arches "cache" [lsort -dictionary -unique [concat \ |
| [mips_arch_list_matching mips3] \ |
| [mips_arch_list_matching mips32] ] ] |
| run_dump_test_arches "daddi" [mips_arch_list_matching mips3] |
| run_dump_test_arches "pref" [lsort -dictionary -unique [concat \ |
| [mips_arch_list_matching mips4] \ |
| [mips_arch_list_matching mips32] ] ] |
| |
| if $has_newabi { run_dump_test "cfi-n64-1" } |
| |
| run_dump_test "pr12915" |
| run_dump_test "reginfo-1a" |
| run_dump_test "reginfo-1b" |
| |
| run_dump_test "micromips" |
| run_dump_test "micromips-trap" |
| run_dump_test "micromips-insn32" |
| run_dump_test "micromips-noinsn32" |
| run_list_test "micromips" "-mips32r2 -32 -mfp64 -minsn32" \ |
| "microMIPS for MIPS32r2 (instructions invalid in insn32 mode)" |
| run_list_test "micromips-size-0" \ |
| "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0" |
| run_dump_test "micromips-size-1" |
| run_dump_test "micromips-branch-relax" |
| run_dump_test "micromips-branch-relax-pic" |
| run_dump_test "micromips-branch-delay" |
| run_dump_test "micromips-warn-branch-delay" |
| run_dump_test "micromips-warn-branch-delay-1" |
| run_dump_test "micromips-b16" |
| |
| run_dump_test_arches "mcu" [mips_arch_list_matching mips32r2 \ |
| !octeon] |
| run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all] |
| run_dump_test_arches "hilo-diff-el" [mips_arch_list_all] |
| if $has_newabi { |
| run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3] |
| run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3] |
| run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3] |
| run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3] |
| } |
| run_dump_test_arches "lui" [mips_arch_list_matching mips1] |
| run_list_test_arches "lui-1" "-32" [mips_arch_list_matching mips1] |
| run_list_test_arches "lui-2" "-32" [mips_arch_list_matching mips1] |
| |
| run_dump_test "r5900" |
| run_dump_test "r5900-full" |
| run_list_test "r5900-nollsc" "-mabi=o64 -march=r5900" |
| run_dump_test "r5900-vu0" |
| |
| run_list_test_arches "ext-ill" [mips_arch_list_matching mips64r2] |
| |
| run_list_test "ase-errors-1" "-mabi=32 -march=mips1" "ASE errors (1)" |
| run_list_test "ase-errors-2" "-mabi=o64 -march=mips3" "ASE errors (2)" |
| run_list_test "ase-errors-3" "-mabi=32 -march=mips1" "ASE errors (3)" |
| run_list_test "ase-errors-4" "-mabi=o64 -march=mips3" "ASE errors (4)" |
| |
| run_dump_test_arches "la-reloc" [mips_arch_list_matching mips1] |
| if { $has_newabi } { |
| run_dump_test_arches "dla-reloc" [mips_arch_list_matching mips3] |
| } |
| |
| # Start with MIPS II to avoid load delay nops. |
| run_dump_test_arches "ld-reloc" [mips_arch_list_matching mips2] |
| run_dump_test_arches "ulw-reloc" [mips_arch_list_matching mips2] |
| run_dump_test_arches "ulh-reloc" [mips_arch_list_matching mips2] |
| |
| run_dump_test "l_d-reloc" |
| } |