| 2013-06-01 George Thomas <george.thomas@atmel.com> |
| |
| * gas/config/tc-avr.c: Change ISA for devices with USB support to |
| AVR_ISA_XMEGAU |
| |
| 2013-05-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (md_begin): Don't align text/data/bss sections |
| for ELF. |
| |
| 2013-05-31 Paul Brook <paul@codesourcery.com> |
| |
| gas/ |
| * config/tc-mips.c (s_ehword): New. |
| |
| 2013-05-30 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH. |
| |
| 2013-05-29 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * write.c (resolve_reloc_expr_symbols): On REL targets don't |
| convert relocs who have no relocatable field either. Rephrase |
| the conditional so that the PC-relative check is only applied |
| for REL targets. |
| |
| 2013-05-28 Chao-ying Fu <Chao-ying.Fu@imgtec.com> |
| |
| * config/tc-mips.c (macro) <ld>: Don't use $zero for address |
| calculation. |
| |
| 2013-05-28 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (reloc_table): Update to use |
| BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of |
| BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE. |
| (md_apply_fix): Likewise. |
| (aarch64_force_relocation): Likewise. |
| |
| 2013-05-28 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (it_fsm_post_encode): Improve |
| warning messages about deprecated IT block formats. |
| |
| 2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com> |
| |
| * config/tc-aarch64.c (md_apply_fix): Move value range checking |
| inside fx_done condition. |
| |
| 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de> |
| |
| * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB. |
| |
| 2013-05-20 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error |
| and clean up warning when using PRINT_OPCODE_TABLE. |
| |
| 2013-05-20 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_apply_fix): Hoist code common to insn |
| and data fixups performing shift/high adjust/sign extension on |
| fieldval. Sink fx_pcrel handling and checks. Use fixP->fx_size |
| when writing data fixups rather than recalculating size. |
| |
| 2013-05-16 Jan-Benedict Glaw <jbglaw@lug-owl.de> |
| |
| * doc/c-msp430.texi: Fix typo. |
| |
| 2013-05-16 Tristan Gingold <gingold@adacore.com> |
| |
| * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC |
| are also TOC symbols. |
| |
| 2013-05-16 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c: Make -mmcu recognise more part numbers. |
| Add -mcpu command to specify core type. |
| * doc/c-msp430.texi: Update documentation. |
| |
| 2013-05-09 Andrew Pinski <apinski@cavium.com> |
| |
| * config/tc-mips.c (struct mips_set_options): New ase_virt field. |
| (mips_opts): Update for the new field. |
| (file_ase_virt): New variable. |
| (ISA_SUPPORTS_VIRT_ASE): New macro. |
| (ISA_SUPPORTS_VIRT64_ASE): New macro. |
| (MIPS_CPU_ASE_VIRT): New define. |
| (is_opcode_valid): Handle ase_virt. |
| (macro_build): Handle "+J". |
| (validate_mips_insn): Likewise. |
| (mips_ip): Likewise. |
| (enum options): Add OPTION_VIRT and OPTION_NO_VIRT. |
| (md_longopts): Add mvirt and mnovirt |
| (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT. |
| (mips_after_parse_args): Handle ase_virt field. |
| (s_mipsset): Handle "virt" and "novirt". |
| (mips_elf_final_processing): Add a comment about virt ASE might need |
| a new flag. |
| (md_show_usage): Print out the usage of -mvirt and mno-virt options. |
| * doc/c-mips.texi: Document -mvirt and -mno-virt. |
| Document ".set virt" and ".set novirt". |
| |
| 2013-05-09 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under |
| control of operand flag bits. |
| |
| 2013-05-07 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro. |
| (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise. |
| (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise. |
| (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise. |
| (md_apply_fix): Set fx_no_overflow for assorted relocations. |
| Shift and sign-extend fieldval for use by some VLE reloc |
| operand->insert functions. |
| |
| 2013-05-06 Paul Brook <paul@codesourcery.com> |
| Catherine Moore <clm@codesourcery.com> |
| |
| * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL. |
| (limited_pcrel_reloc_p): Likewise. |
| (md_apply_fix): Likewise. |
| (tc_gen_reloc): Likewise. |
| |
| 2013-05-06 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (limited_pcrel_reloc_p): New function. |
| (mips_fix_adjustable): Adjust pc-relative check to use |
| limited_pc_reloc_p. |
| |
| 2013-05-02 Richard Sandiford <rdsandiford@googlemail.com> |
| |
| * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries. |
| (s_mips_stab): Do not restrict to stabn only. |
| |
| 2013-05-02 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-msp430.c: Add support for the MSP430X architecture. |
| Add code to insert a NOP instruction after any instruction that |
| might change the interrupt state. |
| Add support for the LARGE memory model. |
| Add code to initialise the .MSP430.attributes section. |
| * config/tc-msp430.h: Add support for the MSP430X architecture. |
| * doc/c-msp430.texi: Document the new -mL and -mN command line |
| options. |
| * NEWS: Mention support for the MSP430X architecture. |
| |
| 2013-05-01 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * configure.tgt: Replace alpha*-*-linuxecoff* pattern with |
| alpha*-*-linux*ecoff*. |
| |
| 2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com> |
| |
| * config/tc-mips.c (mips_ip): Add sizelo. |
| For "+C", "+G", and "+H", set sizelo and compare against it. |
| |
| 2013-04-29 Nick Clifton <nickc@redhat.com> |
| |
| * as.c (Options): Add -gdwarf-sections. |
| (parse_args): Likewise. |
| * as.h (flag_dwarf_sections): Declare. |
| * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes. |
| (process_entries): When -gdwarf-sections is enabled generate |
| fragmentary .debug_line sections. |
| (out_debug_line): Set the section for the .debug_line section end |
| symbol. |
| * doc/as.texinfo: Document -gdwarf-sections. |
| * NEWS: Mention -gdwarf-sections. |
| |
| 2013-04-26 Christian Groessler <chris@groessler.org> |
| |
| * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline |
| according to the target parameter. Don't call s_segm since s_segm |
| calls bfd_set_arch_mach using stdoutput, but stdoutput isn't |
| initialized yet. |
| (md_begin): Call s_segm according to target parameter from command |
| line. |
| |
| 2013-04-25 Alan Modra <amodra@gmail.com> |
| |
| * configure.in: Allow little-endian linux. |
| * configure: Regenerate. |
| |
| 2013-04-24 Sandra Loosemore <sandra@codesourcery.com> |
| |
| * config/tc-nios2.c (nios2_control_register_arg_p): Rename |
| "fstatus" control register to "eccinj". |
| |
| 2013-04-19 Kai Tietz <ktietz@redhat.com> |
| |
| * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin. |
| |
| 2013-04-15 Julian Brown <julian@codesourcery.com> |
| |
| * expr.c (add_to_result, subtract_from_result): Make global. |
| * expr.h (add_to_result, subtract_from_result): Add prototypes. |
| * config/tc-sh.c (sh_optimize_expr): Use add_to_result, |
| subtract_from_result to handle extra bit of precision for .sleb128 |
| directive operands. |
| |
| 2013-04-10 Julian Brown <julian@codesourcery.com> |
| |
| * read.c (convert_to_bignum): Add sign parameter. Use it |
| instead of X_unsigned to determine sign of resulting bignum. |
| (emit_expr): Pass extra argument to convert_to_bignum. |
| (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass |
| X_extrabit to convert_to_bignum. |
| (parse_bitfield_cons): Set X_extrabit. |
| * expr.c (make_expr_symbol, expr_build_uconstant, operand): |
| Initialise X_extrabit field as appropriate. |
| (add_to_result): New. |
| (subtract_from_result): New. |
| (expr): Use above. |
| * expr.h (expressionS): Add X_extrabit field. |
| |
| 2013-04-10 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base |
| register being PC when is_t or writeback, and use distinct |
| diagnostic for the latter case. |
| |
| 2013-04-10 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (parse_operands): Re-write |
| po_barrier_or_imm(). |
| (do_barrier): Remove bogus constraint(). |
| (do_t_barrier): Remove. |
| |
| 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com> |
| |
| * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2, |
| ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2, |
| ATmega2564RFR2 |
| * gas/doc/c-avr.texi (-mmcu documentation): Likewise. |
| |
| 2013-04-09 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (do_vmrs): Accept all control registers. |
| Use local variable Rt in more places. |
| (do_vmsr): Accept all control registers. |
| |
| 2013-04-09 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix |
| if there was none specified for moves between scalar and core |
| register. |
| |
| 2013-04-09 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the |
| NEON_ALL_LANES case. |
| |
| 2013-04-08 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for |
| PC-relative VSTR. |
| |
| 2013-04-08 Jan Beulich <jbeulich@suse.com> |
| |
| * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq |
| entry to sp_fiq. |
| |
| 2013-04-03 Alan Modra <amodra@gmail.com> |
| |
| * doc/as.texinfo: Add support to generate man options for h8300. |
| * doc/c-h8300.texi: Likewise. |
| |
| 2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and |
| Cortex-A57. |
| |
| 2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com> |
| |
| PR binutils/15068 |
| * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array. |
| |
| 2013-03-26 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/15295 |
| * listing.c (rebuffer_line): Rewrite to avoid seeking back to the |
| start of the file each time. |
| |
| PR gas/15178 |
| * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for |
| FreeBSD targets. |
| |
| 2013-03-26 Douglas B Rupp <rupp@gnat.com> |
| |
| * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment |
| after fixup. |
| |
| 2013-03-21 Will Newton <will.newton@linaro.org> |
| |
| * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all |
| pc-relative str instructions in Thumb mode. |
| |
| 2013-03-21 Michael Schewe <michael.schewe@gmx.net> |
| |
| * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov |
| @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc |
| R_H8_DISP32A16. |
| * config/tc-h8300.h: Remove duplicated defines. |
| |
| 2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> |
| |
| PR gas/15282 |
| * tc-avr.c (mcu_has_3_byte_pc): New function. |
| (tc_cfi_frame_initial_instructions): Call it to find return |
| address size. |
| |
| 2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com> |
| |
| PR gas/15095 |
| * config/tc-tic6x.c (tic6x_try_encode): Handle |
| tic6x_coding_dreg_(msb|lsb) field coding types and use it to |
| encode register pair numbers when required. |
| |
| 2013-03-15 Will Newton <will.newton@linaro.org> |
| |
| * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register |
| in vstr in Thumb mode for pre-ARMv7 cores. |
| |
| 2013-03-14 Andreas Schwab <schwab@suse.de> |
| |
| * doc/c-arc.texi (ARC Directives): Revert last change and use |
| @itemize instead of @table. |
| * doc/c-arm.texi (ARM-Instruction-Set): Likewise. |
| |
| 2013-03-14 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/15273 |
| * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a |
| NULL message, instead just check ARM_CPU_IS_ANY directly. |
| |
| 2013-03-14 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/15212 |
| * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet |
| for table format. |
| * doc/c-arm.texi (ARM-Instruction-Set): Likewise. Also add text |
| to the @item directives. |
| (ARM-Neon-Alignment): Move to correct place in the document. |
| * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table |
| formatting. |
| * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of |
| @smallexample. |
| |
| 2013-03-12 Sebastian Huber <sebastian.huber@embedded-brains.de> |
| |
| * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case. Add 'o' |
| case. Add default BAD_CASE to switch. |
| |
| 2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de> |
| |
| * config/tc-nios2.c (nios2_assemble_args_ds): New function. |
| (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries. |
| |
| 2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (crc_ext_armv8): New feature set. |
| (UNPRED_REG): New macro. |
| (do_crc32_1): New function. |
| (do_crc32b, do_crc32h, do_crc32w, do_crc32cb, |
| do_crc32ch, do_crc32cw): Likewise. |
| (TUEc): New macro. |
| (insns): Add entries for crc32 mnemonics. |
| (arm_extensions): Add entry for crc. |
| |
| 2013-03-08 Chung-Lin Tang <cltang@codesourcery.com> |
| |
| * write.h (struct fix): Add fx_dot_frag field. |
| (dot_frag): Declare. |
| * write.c (dot_frag): New variable. |
| (fix_new_internal): Set fx_dot_frag field with dot_frag. |
| (fixup_segment): Base calculation of fx_offset with fx_dot_frag. |
| * expr.c (expr): Save value of frag_now in dot_frag when setting |
| dot_value. |
| * read.c (emit_expr): Likewise. Delete comments. |
| |
| 2013-03-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (flag_code_names): Removed. |
| (i386_index_check): Rewrote. |
| |
| 2013-03-05 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern'; |
| add comment. |
| (aarch64_double_precision_fmovable): New function. |
| (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new |
| function; handle hexadecimal representation of IEEE754 encoding. |
| (parse_operands): Update the call to parse_aarch64_imm_float. |
| |
| 2013-02-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix. |
| (check_hle): Updated. |
| (md_assemble): Likewise. |
| (parse_insn): Likewise. |
| |
| 2013-02-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (_i386_insn): Add rep_prefix. |
| (md_assemble): Check if REP prefix is OK. |
| (parse_insn): Remove expecting_string_instruction. Set |
| i.rep_prefix. |
| |
| 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_features): Add the 'crc' option. |
| |
| 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn |
| for system registers. |
| |
| 2013-02-27 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE. |
| (rl78_op): Handle %code(). |
| (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands. |
| (tc_gen_reloc): Likwise; convert to a computed reloc. |
| (md_apply_fix): Likewise. |
| |
| 2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com> |
| |
| * config/rl78-parse.y: Fix encoding of DIVWU insn. |
| |
| 2013-02-25 Terry Guo <terry.guo@arm.com> |
| |
| * config/tc-arm.c (arm_cpus): Add cortex-r7 entry. |
| * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to |
| list of accepted CPUs. |
| |
| 2013-02-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/15159 |
| * config/tc-i386.c (cpu_arch): Add ".smap". |
| |
| * doc/c-i386.texi: Document smap. |
| |
| 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (s_cpload): Call mips_mark_labels and set |
| mips_assembling_insn appropriately. |
| (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise. |
| |
| 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com> |
| |
| * config/tc-mips.c (append_insn): Correct indentation, remove |
| extraneous braces. |
| |
| 2013-02-15 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * config/tc-arm.c (do_neon_mov): Break on NS_NULL. |
| |
| 2013-02-15 Sebastian Huber <sebastian.huber@embedded-brains.de> |
| |
| * configure.tgt: Add nios2-*-rtems*. |
| |
| 2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (md_begin): Change to check if 'name' is |
| NULL. |
| |
| 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de> |
| |
| * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro. |
| (macro): Use it. Assert that trunc.w.s is not used for r5900. |
| |
| 2013-02-08 Yi-Hsiu, Hsu <ahsu@marvell.com> |
| |
| * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4 |
| core. |
| |
| 2013-02-06 Sandra Loosemore <sandra@codesourcery.com> |
| Andrew Jenner <andrew@codesourcery.com> |
| |
| Based on patches from Altera Corporation. |
| |
| * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c. |
| (TARGET_CPU_HFILES): Add config/tc-nios2.h. |
| * Makefile.in: Regenerated. |
| * configure.tgt: Add case for nios2*-linux*. |
| * config/obj-elf.c: Conditionally include elf/nios2.h. |
| * config/tc-nios2.c: New file. |
| * config/tc-nios2.h: New file. |
| * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi. |
| * doc/Makefile.in: Regenerated. |
| * doc/all.texi: Set NIOSII. |
| * doc/as.texinfo (Overview): Add Nios II options. |
| (Machine Dependencies): Include c-nios2.texi. |
| * doc/c-nios2.texi: New file. |
| * NEWS: Note Altera Nios II support. |
| |
| 2013-02-06 Alan Modra <amodra@gmail.com> |
| |
| PR gas/14255 |
| * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc. |
| Don't skip fixups with fx_subsy non-NULL. |
| * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups |
| with fx_subsy non-NULL. |
| |
| 2013-02-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * doc/c-metag.texi: Add "@c man" markers. |
| |
| 2013-02-04 Alan Modra <amodra@gmail.com> |
| |
| * write.c (fixup_segment): Return void. Delete seg_reloc_count |
| related code. |
| (TC_ADJUST_RELOC_COUNT): Delete. |
| * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete. |
| |
| 2013-02-04 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2013-01-30 Markos Chandras <markos.chandras@imgtec.com> |
| |
| * config/tc-metag.c: Make SWAP instruction less permissive with |
| its operands. |
| |
| 2013-01-29 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified |
| relocs in .word/.etc statements. |
| |
| 2013-01-29 Roland McGrath <mcgrathr@google.com> |
| |
| * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad |
| immediate value for 8-bit offset" error so it shows line info. |
| |
| 2013-01-24 Joseph Myers <joseph@codesourcery.com> |
| |
| * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections |
| for 64-bit output. |
| |
| 2013-01-24 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-v850.c: Add support for e3v5 architecture. |
| * doc/c-v850.texi: Mention new support. |
| |
| 2013-01-23 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/15039 |
| * config/tc-avr.c: Include dwarf2dbg.h. |
| |
| 2013-01-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (reloc): Support size relocation only for ELF. |
| (tc_i386_fix_adjustable): Likewise. |
| (lex_got): Likewise. |
| (tc_gen_reloc): Likewise. |
| |
| 2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (output_operand_error_record): Change to output |
| the out-of-range error message as value-expected message if there is |
| only one single value in the expected range. |
| (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with |
| LSL #0 as a programmer-friendly feature. |
| |
| 2013-01-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32. |
| (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and |
| BFD_RELOC_64_SIZE relocations. |
| (lex_got): Support "symbol@SIZE" and don't create GOT symbol |
| for it. |
| (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64 |
| relocations against local symbols. |
| |
| 2013-01-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after |
| finding some sort of toc syntax error, and break to avoid |
| compiler uninit warning. |
| |
| 2013-01-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/15019 |
| * config/tc-i386.c (lex_got): Increment length by 1 if the |
| relocation token is removed. |
| |
| 2013-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-v850.c (md_assemble): Allow signed values for |
| V850E_IMMEDIATE. |
| |
| 2013-01-11 Sean Keys <skeys@ipdatasys.com> |
| |
| * config/tc-xgate.c (md_begin): Fix mistake made when going from |
| git to cvs. |
| |
| 2013-01-10 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm. |
| * doc/c-ppc.texi (PowerPC-Opts): Likewise. |
| * config/tc-ppc.c (md_show_usage): Likewise. |
| (ppc_handle_align): Handle power8's group ending nop. |
| |
| 2013-01-10 Sean Keys <skeys@ipdatasys.com> |
| |
| * config/tc-xgate.c (md_begin): Fix the printing of opcodes so |
| that the assember exits after the opcodes have been printed. |
| |
| 2013-01-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * app.c: Remove trailing white spaces. |
| * as.c: Likewise. |
| * as.h: Likewise. |
| * cond.c: Likewise. |
| * dw2gencfi.c: Likewise. |
| * dwarf2dbg.h: Likewise. |
| * ecoff.c: Likewise. |
| * input-file.c: Likewise. |
| * itbl-lex.h: Likewise. |
| * output-file.c: Likewise. |
| * read.c: Likewise. |
| * sb.c: Likewise. |
| * subsegs.c: Likewise. |
| * symbols.c: Likewise. |
| * write.c: Likewise. |
| * config/tc-i386.c: Likewise. |
| * doc/Makefile.am: Likewise. |
| * doc/Makefile.in: Likewise. |
| * doc/c-aarch64.texi: Likewise. |
| * doc/c-alpha.texi: Likewise. |
| * doc/c-arc.texi: Likewise. |
| * doc/c-arm.texi: Likewise. |
| * doc/c-avr.texi: Likewise. |
| * doc/c-bfin.texi: Likewise. |
| * doc/c-cr16.texi: Likewise. |
| * doc/c-d10v.texi: Likewise. |
| * doc/c-d30v.texi: Likewise. |
| * doc/c-h8300.texi: Likewise. |
| * doc/c-hppa.texi: Likewise. |
| * doc/c-i370.texi: Likewise. |
| * doc/c-i386.texi: Likewise. |
| * doc/c-i860.texi: Likewise. |
| * doc/c-m32c.texi: Likewise. |
| * doc/c-m32r.texi: Likewise. |
| * doc/c-m68hc11.texi: Likewise. |
| * doc/c-m68k.texi: Likewise. |
| * doc/c-microblaze.texi: Likewise. |
| * doc/c-mips.texi: Likewise. |
| * doc/c-msp430.texi: Likewise. |
| * doc/c-mt.texi: Likewise. |
| * doc/c-s390.texi: Likewise. |
| * doc/c-score.texi: Likewise. |
| * doc/c-sh.texi: Likewise. |
| * doc/c-sh64.texi: Likewise. |
| * doc/c-tic54x.texi: Likewise. |
| * doc/c-tic6x.texi: Likewise. |
| * doc/c-v850.texi: Likewise. |
| * doc/c-xc16x.texi: Likewise. |
| * doc/c-xgate.texi: Likewise. |
| * doc/c-xtensa.texi: Likewise. |
| * doc/c-z80.texi: Likewise. |
| * doc/internals.texi: Likewise. |
| |
| 2013-01-10 Roland McGrath <mcgrathr@google.com> |
| |
| * hash.c (hash_new_sized): Make it global. |
| * hash.h: Declare it. |
| * macro.c (define_macro): Use hash_new_sized instead of hash_new, |
| pass a small size. |
| |
| 2013-01-10 Will Newton <will.newton@imgtec.com> |
| |
| * Makefile.am: Add Meta. |
| * Makefile.in: Regenerate. |
| * config/tc-metag.c: New file. |
| * config/tc-metag.h: New file. |
| * configure.tgt: Add Meta. |
| * doc/Makefile.am: Add Meta. |
| * doc/Makefile.in: Regenerate. |
| * doc/all.texi: Add Meta. |
| * doc/as.texiinfo: Document Meta options. |
| * doc/c-metag.texi: New file. |
| |
| 2013-01-09 Steve Ellcey <sellcey@mips.com> |
| |
| * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal |
| calls. |
| * config/tc-mips.c (internalError): Remove, replace with abort. |
| |
| 2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Change to compare the result |
| of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'. |
| |
| 2013-01-07 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/14887 |
| * config/tc-arm.c (skip_past_char): Skip whitespace before the |
| anticipated character. |
| * config/tc-arm.c (parse_address_main): Delete skip of whitespace |
| here as it is no longer needed. |
| |
| 2013-01-06 Andreas Schwab <schwab@linux-m68k.org> |
| |
| * doc/c-mips.texi (MIPS Opts): Fix use of @itemx. |
| * doc/c-score.texi (SCORE-Opts): Likewise. |
| * doc/c-tic54x.texi (TIC54X-Directives): Likewise. |
| |
| 2013-01-04 Juergen Urban <JuergenUrban@gmx.de> |
| |
| * config/tc-mips.c: Add support for MIPS r5900. |
| Add M_LQ_AB and M_SQ_AB to support large values for instructions |
| lq and sq. |
| (can_swap_branch_p, get_append_method): Detect some conditional |
| short loops to fix a bug on the r5900 by NOP in the branch delay |
| slot. |
| (M_MUL): Support 3 operands in multu on r5900. |
| (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I. |
| (s_mipsset): Force 32 bit floating point on r5900. |
| (mips_ip): Check parameter range of instructions mfps and mtps on |
| r5900. |
| * configure.in: Detect CPU type when target string contains r5900 |
| (e.g. mips64r5900el-linux-gnu). |
| |
| 2013-01-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * as.c (parse_args): Update copyright year to 2013. |
| |
| 2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53" |
| and "cortex57". |
| |
| 2013-01-02 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/14987 |
| * config/tc-arm.c (parse_address_main): Skip whitespace before a |
| closing bracket. |
| |
| For older changes see ChangeLog-2012 |
| |
| Copyright (C) 2013 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |