# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@

# Automake 1.9 will only build info files in the objdir if they are
# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
# though, so we use a bogus condition.
@GENINSRC_NEVER_TRUE@am__append_1 = bfd.info
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
	$(bfd_TEXINFOS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/extensions.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/proginstall.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../config/stdint.m4 $(top_srcdir)/../bfd/bfd.m4 \
	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../libtool.m4 \
	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
INFO_DEPS = bfd.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = bfd.dvi
PDFS = bfd.pdf
PSS = bfd.ps
HTMLS = bfd.html
TEXINFOS = bfd.texinfo
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \
             echo $(top_srcdir)/../texinfo/util/texi2dvi; \
           else \
             echo texi2dvi; \
           fi`
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BFD_HOSTPTR_T = @BFD_HOSTPTR_T@
BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@
BFD_HOST_64BIT_LONG_LONG = @BFD_HOST_64BIT_LONG_LONG@
BFD_HOST_64_BIT = @BFD_HOST_64_BIT@
BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@
BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
COREFILE = @COREFILE@
COREFLAG = @COREFLAG@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEBUGDIR = @DEBUGDIR@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GENCAT = @GENCAT@
GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_LIBBFD_FALSE = @INSTALL_LIBBFD_FALSE@
INSTALL_LIBBFD_TRUE = @INSTALL_LIBBFD_TRUE@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKGVERSION = @PKGVERSION@
PLUGINS_FALSE = @PLUGINS_FALSE@
PLUGINS_TRUE = @PLUGINS_TRUE@
POSUB = @POSUB@
RANLIB = @RANLIB@
REPORT_BUGS_TEXI = @REPORT_BUGS_TEXI@
REPORT_BUGS_TO = @REPORT_BUGS_TO@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHARED_LDFLAGS = @SHARED_LDFLAGS@
SHARED_LIBADD = @SHARED_LIBADD@
SHELL = @SHELL@
STRIP = @STRIP@
TDEFINES = @TDEFINES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DSYMUTIL = @ac_ct_DSYMUTIL@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_LIPO = @ac_ct_LIPO@
ac_ct_NMEDIT = @ac_ct_NMEDIT@
ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
ac_ct_OTOOL = @ac_ct_OTOOL@
ac_ct_OTOOL64 = @ac_ct_OTOOL64@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
all_backends = @all_backends@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bfd64_libs = @bfd64_libs@
bfd_backends = @bfd_backends@
bfd_default_target_size = @bfd_default_target_size@
bfd_file_ptr = @bfd_file_ptr@
bfd_machines = @bfd_machines@
bfd_ufile_ptr = @bfd_ufile_ptr@
bfdincludedir = @bfdincludedir@
bfdlibdir = @bfdlibdir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_noncanonical = @host_noncanonical@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
supports_plugins = @supports_plugins@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_noncanonical = @target_noncanonical@
target_os = @target_os@
target_vendor = @target_vendor@
tdefaults = @tdefaults@
wordsize = @wordsize@
AUTOMAKE_OPTIONS = 1.9 cygnus
DOCFILES = aoutx.texi  archive.texi archures.texi \
	bfdt.texi  cache.texi coffcode.texi \
	core.texi elf.texi elfcode.texi  format.texi \
	libbfd.texi bfdwin.texi bfdio.texi \
	opncls.texi  reloc.texi  section.texi  \
	syms.texi  targets.texi init.texi hash.texi linker.texi \
	mmo.texi \
	bfdver.texi

PROTOS = archive.p archures.p bfd.p \
	 core.p format.p \
	bfdio.p bfdwin.p \
	libbfd.p opncls.p reloc.p \
	section.p syms.p targets.p  \
	format.p  core.p init.p

IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip

# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
# you don't need these three:
SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
	$(srcdir)/../hash.c $(srcdir)/../linker.c \
	$(srcdir)/../mmo.c

SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
	$(srcdir)/../section.c $(srcdir)/../syms.c \
	$(srcdir)/../targets.c $(srcdir)/../init.c

SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
	$(srcdir)/../init.c

TEXIDIR = $(srcdir)/../../texinfo/fsf
info_TEXINFOS = bfd.texinfo
bfd_TEXINFOS = $(DOCFILES) bfdsumm.texi
MKDOC = chew$(EXEEXT_FOR_BUILD)
INCLUDES = -I.. -I$(srcdir)/.. -I$(srcdir)/../../include \
	-I$(srcdir)/../../intl -I../../intl

LIBBFD_H_DEP = \
	$(srcdir)/../libbfd-in.h	\
	$(srcdir)/../init.c		\
	$(srcdir)/../libbfd.c		\
	$(srcdir)/../bfdio.c		\
	$(srcdir)/../bfdwin.c		\
	$(srcdir)/../cache.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../elf.c		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(MKDOC)

LIBCOFF_H_DEP = \
	$(srcdir)/../libcoff-in.h	\
	$(srcdir)/../coffcode.h		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(MKDOC)

BFD_H_DEP = \
	$(srcdir)/../bfd-in.h 		\
	$(srcdir)/../init.c 		\
	$(srcdir)/../opncls.c 		\
	$(srcdir)/../libbfd.c 		\
	$(srcdir)/../bfdio.c		\
	$(srcdir)/../bfdwin.c		\
	$(srcdir)/../section.c 		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../syms.c		\
	$(srcdir)/../bfd.c		\
	$(srcdir)/../archive.c		\
	$(srcdir)/../corefile.c		\
	$(srcdir)/../targets.c		\
	$(srcdir)/../format.c		\
	$(srcdir)/../linker.c		\
	$(srcdir)/../simple.c		\
	$(srcdir)/../compress.c		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(srcdir)/../version.h		\
	$(MKDOC)

noinst_TEXINFOS = bfdint.texi
MOSTLYCLEANFILES = $(MKDOC) *.o
CLEANFILES = *.p *.ip
DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
	$(am__append_1)
MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool

bfd.info: bfd.texinfo $(bfd_TEXINFOS)
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

bfd.dvi: bfd.texinfo $(bfd_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo

bfd.pdf: bfd.texinfo $(bfd_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo

bfd.html: bfd.texinfo $(bfd_TEXINFOS) 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf bfd.aux bfd.cp bfd.cps bfd.fn bfd.ky bfd.kys bfd.log bfd.pg bfd.pgs \
	  bfd.tmp bfd.toc bfd.tp bfd.tps bfd.vr bfd.vrs bfd.dvi \
	  bfd.pdf bfd.ps bfd.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done

clean-info: mostlyclean-aminfo
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

check-am:
check: check-am
all-am: Makefile
installdirs:
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am:

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am:

.PHONY: all all-am check check-am clean clean-generic clean-info \
	clean-libtool dist-info distclean distclean-generic \
	distclean-libtool dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-info-am


$(MKDOC): $(srcdir)/chew.c
	$(CC_FOR_BUILD) -o chew.$$$$ $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) \
	  $(H_CFLAGS) $(INCLUDES) $(srcdir)/chew.c; \
	$(SHELL) $(srcdir)/../../move-if-change chew.$$$$ $(MKDOC)

protos: libbfd.h libcoff.h bfd.h

# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.

# We do not depend on chew directly so that we can distribute the info
# files, and permit people to rebuild them, without requiring the makeinfo
# program.  If somebody tries to rebuild info, but none of the .texi files
# have changed, then nothing will be rebuilt.

aoutx.texi: chew.c $(srcdir)/../aoutx.h $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../aoutx.h >aoutx.tmp
	$(SHELL) $(srcdir)/../../move-if-change aoutx.tmp aoutx.texi

archive.texi: chew.c $(srcdir)/../archive.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../archive.c >archive.tmp
	$(SHELL) $(srcdir)/../../move-if-change archive.tmp archive.texi

archures.texi: chew.c $(srcdir)/../archures.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archures.c >archures.tmp
	$(SHELL) $(srcdir)/../../move-if-change archures.tmp archures.texi

# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
# bfd.texinfo on an 8.3 filesystem.
bfdt.texi: chew.c $(srcdir)/../bfd.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfd.c >bfd.tmp
	$(SHELL) $(srcdir)/../../move-if-change bfd.tmp bfdt.texi

cache.texi: chew.c $(srcdir)/../cache.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../cache.c >cache.tmp
	$(SHELL) $(srcdir)/../../move-if-change cache.tmp cache.texi

coffcode.texi: chew.c $(srcdir)/../coffcode.h $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../coffcode.h >coffcode.tmp
	$(SHELL) $(srcdir)/../../move-if-change coffcode.tmp coffcode.texi

core.texi: chew.c $(srcdir)/../corefile.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../corefile.c >core.tmp
	$(SHELL) $(srcdir)/../../move-if-change core.tmp core.texi

elf.texi: chew.c $(srcdir)/../elf.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elf.c >elf.tmp
	$(SHELL) $(srcdir)/../../move-if-change elf.tmp elf.texi

elfcode.texi: chew.c $(srcdir)/../elfcode.h $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elfcode.h >elfcode.tmp
	$(SHELL) $(srcdir)/../../move-if-change elfcode.tmp elfcode.texi

mmo.texi: chew.c $(srcdir)/../mmo.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../mmo.c >mmo.tmp
	$(SHELL) $(srcdir)/../../move-if-change mmo.tmp mmo.texi

format.texi: chew.c $(srcdir)/../format.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../format.c >format.tmp
	$(SHELL) $(srcdir)/../../move-if-change format.tmp format.texi

libbfd.texi: chew.c $(srcdir)/../libbfd.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../libbfd.c >libbfd.tmp
	$(SHELL) $(srcdir)/../../move-if-change libbfd.tmp libbfd.texi

bfdio.texi: chew.c $(srcdir)/../bfdio.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdio.c >bfdio.tmp
	$(SHELL) $(srcdir)/../../move-if-change bfdio.tmp bfdio.texi

bfdwin.texi: chew.c $(srcdir)/../bfdwin.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdwin.c >bfdwin.tmp
	$(SHELL) $(srcdir)/../../move-if-change bfdwin.tmp bfdwin.texi

opncls.texi: chew.c $(srcdir)/../opncls.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str  <$(srcdir)/../opncls.c >opncls.tmp
	$(SHELL) $(srcdir)/../../move-if-change opncls.tmp opncls.texi

reloc.texi: chew.c $(srcdir)/../reloc.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../reloc.c >reloc.tmp
	$(SHELL) $(srcdir)/../../move-if-change reloc.tmp reloc.texi

section.texi: chew.c $(srcdir)/../section.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../section.c >section.tmp
	$(SHELL) $(srcdir)/../../move-if-change section.tmp section.texi

syms.texi: chew.c $(srcdir)/../syms.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../syms.c >syms.tmp
	$(SHELL) $(srcdir)/../../move-if-change syms.tmp syms.texi

targets.texi: chew.c $(srcdir)/../targets.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../targets.c >targets.tmp
	$(SHELL) $(srcdir)/../../move-if-change targets.tmp targets.texi

init.texi: chew.c $(srcdir)/../init.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../init.c >init.tmp
	$(SHELL) $(srcdir)/../../move-if-change init.tmp init.texi

hash.texi: chew.c $(srcdir)/../hash.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../hash.c >hash.tmp
	$(SHELL) $(srcdir)/../../move-if-change hash.tmp hash.texi

linker.texi: chew.c $(srcdir)/../linker.c $(srcdir)/doc.str
	$(MAKE) $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../linker.c >linker.tmp
	$(SHELL) $(srcdir)/../../move-if-change linker.tmp linker.texi

libbfd.h: $(LIBBFD_H_DEP)
	echo "$(LIBBFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(LIBBFD_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done

libcoff.h: $(LIBCOFF_H_DEP)
	echo "$(LIBCOFF_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(LIBCOFF_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done

bfd.h: $(BFD_H_DEP)
	echo "$(BFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(BFD_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done
	echo "#ifdef __cplusplus" >> $@
	echo "}" >> $@
	echo "#endif" >> $@
	echo "#endif" >> $@

bfdver.texi: $(srcdir)/Makefile.in
	@echo "creating $@"; \
	echo "@set VERSION $(VERSION)" > bfdver.texi; \
	if [ -n "$(PKGVERSION)" ]; then \
	  echo "@set VERSION_PACKAGE $(PKGVERSION)" >> bfdver.texi; \
	fi; \
	echo "@set UPDATED `date '+%B %Y'`" >> bfdver.texi; \
	if [ -n "$(REPORT_BUGS_TEXI)" ]; then \
	  echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> bfdver.texi; \
	fi

# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install: install-info

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(pdf__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
	done

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
	  f=$(html__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
	  else \
	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	  fi; \
	done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: