## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
## Copyright 1996, 1997, 1998, 1999, 2000, 2001
## Free Software Foundation, Inc.
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
##
## As a special exception to the GNU General Public License, if you
## distribute this file as part of a program that contains a
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.

# serial 46 AC_PROG_LIBTOOL
AC_DEFUN([AC_PROG_LIBTOOL],
[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
  AC_PROVIDE_IFELSE([AC_PROG_CXX],
    [AC_LIBTOOL_CXX],
    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
])])

dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
    [AC_LIBTOOL_GCJ],
    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
        [AC_LIBTOOL_GCJ],
	[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
	  [AC_LIBTOOL_GCJ],
	[ifdef([AC_PROG_GCJ],
	       [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
])])
	 ifdef([A][M_PROG_GCJ],
	       [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
])])
	 ifdef([LT_AC_PROG_GCJ],
	       [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
])])])])])])

AC_DEFUN([_AC_PROG_LIBTOOL],
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl

# Save cache, so that ltconfig can load it
AC_CACHE_SAVE

# Actually configure libtool.  ac_aux_dir is where install-sh is found.
AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])

# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

AC_DEFUN([AC_LIBTOOL_SETUP],
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([AC_EXEEXT])dnl
dnl

# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    AC_PATH_MAGIC
  fi
  ;;
esac

AC_CHECK_TOOL(RANLIB, ranlib, :)
AC_CHECK_TOOL(STRIP, strip, :)

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

AC_ARG_WITH(pic,
  [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
     pic_mode="$withval", pic_mode=default)
test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
   if test "$lt_cv_prog_gnu_ld" = yes; then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -melf32bsmip"
      ;;
    *N32*)
      LD="${LD-ld} -melf32bmipn32"
      ;;
    *64-bit*)
      LD="${LD-ld} -melf64bmip"
      ;;
    esac
   else
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
   fi
  fi
  rm -rf conftest*
  ;;

ia64-*-hpux*)
  # Find out which ABI we are using.
  echo 'int i;' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case "`/usr/bin/file conftest.o`" in
    *ELF-32*)
      HPUX_IA64_MODE="32"
      ;;
    *ELF-64*)
      HPUX_IA64_MODE="64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_LANG_SAVE
     AC_LANG_C
     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
     AC_LANG_RESTORE])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)

  # recent cygwin and mingw systems supply a stub DllMain which the user
  # can override, but on older systems we have to supply one
  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
    [AC_TRY_LINK([],
      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
      DllMain (0, 0, 0);],
      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])

  case $host/$CC in
  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
    # old mingw systems require "-dll" to link a DLL, while more recent ones
    # require "-mdll"
    SAVE_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS -mdll"
    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
    CFLAGS="$SAVE_CFLAGS" ;;
  *-*-cygwin* | *-*-pw32*)
    # cygwin systems need to pass --dll to the linker, and not link
    # crt.o which will require a WinMain@16 definition.
    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
  esac
  ;;
  ])
esac
])

# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])

# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])

# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN([AC_ENABLE_SHARED],
[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN([AC_ENABLE_STATIC],
[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])

# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN([AC_DISABLE_STATIC],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])


# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN([AC_ENABLE_FAST_INSTALL],
[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN([AC_DISABLE_FAST_INSTALL],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])

# AC_LIBTOOL_PICMODE - implement the --with-pic flag
# Usage: AC_LIBTOOL_PICMODE[(MODE)]
#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
#   `both'.
AC_DEFUN([AC_LIBTOOL_PICMODE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
pic_mode=ifelse($#,1,$1,default)])


# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
AC_DEFUN([AC_PATH_TOOL_PREFIX],
[AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word.  This closes a longstanding sh security hole.
  ac_dummy="ifelse([$2], , $PATH, [$2])"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$1; then
      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac])
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  AC_MSG_RESULT($MAGIC_CMD)
else
  AC_MSG_RESULT(no)
fi
])


# AC_PATH_MAGIC - find a file program which can recognise a shared library
AC_DEFUN([AC_PATH_MAGIC],
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
  else
    MAGIC_CMD=:
  fi
fi
])


# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN([AC_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [[\\/]* | [A-Za-z]:[\\/]*)]
      re_direlt=['/[^/][^/]*/\.\./']
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$lt_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])

AC_DEFUN([AC_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi])
with_gnu_ld=$lt_cv_prog_gnu_ld
])

# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
#   -- PORTME Some linkers may need a different reload flag.
AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
])

# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
#  -- PORTME fill in with the dynamic library characteristics
AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
[AC_CACHE_CHECK([how to recognise dependant libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [regex]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* |pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.[012])
    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd* )
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20*|hpux11*)
  case $host_cpu in
  hppa*)
    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
    lt_cv_file_magic_cmd=/usr/bin/file
    lt_cv_file_magic_test_file=/usr/lib/libc.sl
    ;;
  ia64*)
    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
    lt_cv_file_magic_cmd=/usr/bin/file
    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
    ;;
  esac
  ;;

irix5* | irix6*)
  case $host_os in
  irix5*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux-gnu*)
  case $host_cpu in
  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
    lt_cv_deplibs_check_method=pass_all ;;
  *)
    # glibc up to 2.1.1 does not perform some relocations on ARM
    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
  else
    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
  fi
  ;;

newsos6)
  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

[sysv5uw[78]* | sysv4*uw2*)]
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  motorola)
    lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  esac
  ;;
esac
])
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
])


# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN([AC_PROG_NM],
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(lt_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi])
NM="$lt_cv_path_NM"
AC_MSG_RESULT([$NM])
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN([AC_CHECK_LIBM],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cygwin* | *-*-pw32*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments.  Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case $enable_ltdl_convenience in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!).  If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    INCLTDL=
  fi
])

# If this macro is not defined by Autoconf, define it here.
ifdef([AC_PROVIDE_IFELSE],
      [],
      [define([AC_PROVIDE_IFELSE],
              [ifdef([AC_PROVIDE_$1],
                     [$2], [$3])])])

# AC_LIBTOOL_CXX - enable support for C++ libraries
AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])

AC_DEFUN([_AC_LIBTOOL_CXX],
[AC_REQUIRE([AC_PROG_CXX])
AC_REQUIRE([AC_PROG_CXXCPP])
LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
lt_save_CC="$CC"
lt_save_CFLAGS="$CFLAGS"
dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
dnl is set to the C++ compiler.
AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" \
file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
|| AC_MSG_ERROR([libtool tag configuration failed])
CC="$lt_save_CC"
CFLAGS="$lt_save_CFLAGS"

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

# AC_LIBTOOL_GCJ - enable support for GCJ libraries
AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])

AC_DEFUN([_AC_LIBTOOL_GCJ],
[AC_REQUIRE([AC_PROG_LIBTOOL])
AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
         [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
           [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
lt_save_CC="$CC"
lt_save_CFLAGS="$CFLAGS"
dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
dnl is set to the C++ compiler.
AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" \
file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
|| AC_MSG_ERROR([libtool tag configuration failed])
CC="$lt_save_CC"
CFLAGS="$lt_save_CFLAGS"

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

dnl old names
AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])

dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl

AC_DEFUN([LT_AC_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj, no)
  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
  AC_SUBST(GCJFLAGS)
])