| 2016-04-27 Nick Clifton <nickc@redhat.com> |
| |
| PR target/20000 |
| * fpu.c (check_exceptions): Fix typo checking for signalling |
| NANs. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * gdb-if.c (sim_open): Mark argv const. |
| (sim_create_inferior): Mark argv and env const. |
| |
| 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-11-10 Nick Clifton <nickc@redhat.com> |
| |
| * rx.c (id_names): Add nop4, nop5, nop6 and nop7. |
| (decode_opcode): Likewise. |
| (get_op): Handle RX_Operand_Zero_Indirect. |
| Handle RX_Bad_Size and RX_MAX_SIZE. |
| (put_op): Likewise. |
| (N_MAP): Increase to 90. |
| |
| 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_ARG_ENABLE(cycle-accurate)): Call AS_HELP_STRING. |
| (AC_ARG_ENABLE(cycle-stats)): Likewise. |
| * configure: Regenerate. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-04-24 Nick Clifton <nickc@redhat.com> |
| |
| PR sim/18273 |
| * reg.c (put_reg): Fix check for valid register number. |
| |
| 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2015-12-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdb-if.c (open): Rename to... |
| (rx_sim_is_open): This. Replace all uses of "open" by uses of |
| "rx_sim_is_open" throughout. |
| |
| 2014-08-19 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2014-08-15 Roland McGrath <mcgrathr@google.com> |
| |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2014-03-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * gdb-if.c (sim_do_command): Add const to cmd. Move args |
| to top and add const. Call strdup on cmd and free at end. |
| |
| 2014-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * gdb-if.c (sim_load): Add const to prog. |
| |
| 2014-02-17 Kevin Buettner <kevinb@redhat.com> |
| |
| * gdb-if.c (rx_signal_to_host): Rename to |
| `rx_signal_to_gdb_signal'. Make static. Update all callers |
| to use new name. Use signal names from include/gdb/signals.h. |
| |
| 2013-09-23 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2013-06-25 Nick Clifton <nickc@redhat.com> |
| |
| * rx.c (SHIFT_OP): A shift by zero still sets the condition |
| codes. |
| |
| 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2013-01-16 Nick Clifton <nickc@redhat.com> |
| |
| * rx.c (decode_opcode): Handle RXO_satr. |
| |
| 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * config.in, configure: Regenerate. |
| |
| 2012-05-24 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/7205 |
| |
| Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. |
| |
| 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2012-03-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (CYCLE_ACCURATE): Add template with AC_DEFINE call. |
| (CYCLE_STATS): Likewise. |
| |
| 2012-03-02 Kevin Buettner <kevinb@redhat.com> |
| |
| * load.h (rx_load): Add `callback' parameter to function prototype. |
| (gdb/callback.h): Include. |
| * load.c (load.h): Include. |
| (xprintf, find_section_name_by_offset): New functions. |
| (rx_load): Add `callback' parameter. Add code for printing |
| section loaded using GDB's printf facilities. |
| * gdb-if.c (sim_load, sim_create_inferior): Update calls to |
| rx_load(). |
| * main.c (main): Likewise. |
| * syscalls.c, syscalls.h (get_callbacks): New function. |
| |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: New file. |
| * configure: Regenerate. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change include to common/acinclude.m4. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER |
| call. Replace common.m4 include with SIM_AC_COMMON. |
| * configure: Regenerate. |
| |
| 2011-07-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Rename from configure.in. |
| |
| 2011-07-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.in: Add "dnl" before copyright notice. |
| |
| 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * gdb-if.c (sim_complete_command): New stub function. |
| |
| 2011-01-11 Andrew Burgess <aburgess@broadcom.com> |
| |
| * gdb-if.c (sim_store_register): Update return value to |
| match new API. |
| |
| 2010-12-14 DJ Delorie <dj@redhat.com> |
| |
| * rx.c (decode_opcode): For "MVFC PC,", use the address of the |
| opcode, not the address following the opcode. |
| (decode_opcode): RXO_branchrel is relative to the opcode's PC, not |
| the address following the opcode. |
| |
| 2010-11-11 DJ Delorie <dj@redhat.com> |
| |
| * rx.c (lsb_count): New. |
| (divu_cycles): New. |
| (div_cycles): New. |
| (decode_opcode): Fix cycle count math for div, divu, suntil, and |
| swhile. |
| |
| 2010-09-29 Kevin Buettner <kevinb@redhat.com> |
| |
| * mem.c (rx_mem_ptr): When invalidating the decode cache, account |
| for the fact that the instruction decoder never uses swapped |
| addresses. |
| |
| 2010-09-29 Nick Clifton <nickc@redhat.com> |
| |
| * rx.c (decode_opcode: RXO_int): Only break out of the emulation |
| loop if rx_syscall() does not return a RX_STEPPED result. |
| |
| 2010-09-23 Kevin Buettner <kevinb@redhat.com> |
| |
| * rx.c (decode_opcode): Add cycle information for RXO_smovu. |
| |
| 2010-09-23 Kevin Buettner <kevinb@redhat.com> |
| |
| * fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include. |
| |
| * rx.c (decode_opcode): Declare `tx' as unsigned. |
| |
| * cpu.h (reset_decoder): Declare. |
| * load.c (rx_load): Call `reset_decoder'. |
| * rx.c (reset_decoder): New function. |
| |
| 2010-07-29 DJ Delorie <dj@redhat.com> |
| |
| * rx.c (decode_cache_base): New. |
| (id_names): Remove ediv and edivu. |
| (optype_names): Add TwoReg. |
| (maybe_get_mem_page): New. |
| (rx_get_byte): Call it. |
| (get_op): Add TwoReg support. |
| (put_op): Likewise. |
| (PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode" |
| is a pointer now. |
| (DO_RETURN): New. We use longjmp to return an exception result. |
| (decode_opcode): Make opcode a pointer to the decode cache. Save |
| decoded opcode information and re-use. Call DO_RETURN instead of |
| return throughout. Remove ediv and edivu. |
| * mem.c (ptdc): New. Adds decode cache. |
| (rx_mem_ptr): Support it. |
| (rx_mem_decode_cache): New. |
| * mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE. |
| (rx_mem_decode_cache): Declare. |
| * gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here... |
| * main.c (main): ...and here. Use a fast loop if neither trace |
| nor disassemble is given. |
| * cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED, |
| RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a |
| valid code for anything. |
| |
| 2010-07-27 DJ Delorie <dj@redhat.com> |
| |
| * README.txt: New. |
| * config.h (CYCLE_ACCURATE, CYCLE_STATS): New. |
| * configure.in (--enable-cycle-accurate, --enable-cycle-stats): |
| New. Default to enabled. |
| * configure: Regenerate. |
| |
| * cpu.h (regs_type): Add cycle tracking info. |
| (reset_pipeline_stats): Declare. |
| (halt_pipeline_stats): Declare. |
| (pipeline_stats): Declare. |
| * main.c (done): Call pipeline_stats(). |
| * mem.h (rx_mem_ptr): Moved to here ... |
| * mem.c (mem_ptr): ... from here. Rename throughout. |
| (mem_put_byte): Move LEDs to Port A. Add Port B to control cycle |
| statistics. Move UART to SCI4. |
| (mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles. |
| * reg.c (init_regs): Set Rt reg to -1 (no reg). |
| * rx.c: Add cycle counting and statistics throughout. |
| (rx_get_byte): Optimize for speed. |
| (decode_opcode): Likewise. |
| (reset_pipeline_stats): New. |
| (halt_pipeline_stats): New. |
| (pipeline_stats): New. |
| * trace.c (sim_disasm_one): Print cycle count. |
| |
| 2010-07-07 Kevin Buettner <kevinb@redhat.com> |
| |
| * gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum. |
| |
| 2010-06-24 Kevin Buettner <kevinb@redhat.com> |
| |
| * gdb-if.c (trace.h): Include. |
| (reg_size, sim_fetch_register): Add cases for sim_rx_acc_regnum. |
| |
| 2010-06-07 Nick Clifton <nickc@redhat.com> |
| |
| * reg.c (set_oszc): Use unsigned int for the mask. |
| (set_szc, set_osz, set_sz): Likewise. |
| |
| 2010-05-28 Kevin Buettner <kevinb@redhat.com> |
| |
| * gdb-if.c (sim_do_command): Add a "sim verbose noisy" command. |
| |
| 2010-04-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * gdb-if.c (sim_write): Add const to buf arg. |
| |
| 2010-01-30 Masaki Muranaka <monaka@monami-software.com> |
| |
| * configure.in: Check if the host has getopt.h. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * main.c: Include config.h. |
| Use HAVE_STDLIB_H, HAVE_UNISTD_H, HAVE_GETOPT_H. |
| Include getopt.h in case HAVE_GETOPT_H is defined. |
| |
| 2009-12-22 Yoshinori Sato <ysato@users.sourceforge.jp> |
| |
| * rx/rx.c (decode_opcode): btst bit address mask fix. |
| |
| 2009-11-30 DJ Delorie <dj@redhat.com> |
| |
| * rx/rx.c (decode_opcode): fix SWHILE logic. |
| |
| 2009-10-27 DJ Delorie <dj@redhat.com> |
| Kevin Buettner <kevinb@redhat.com> |
| |
| * load.h: New. |
| * rx.c: New. |
| * syscalls.c: New. |
| * syscalls.h: New. |
| * load.c: New. |
| * configure.in: New. |
| * gdb-if.c: New. |
| * err.c: New. |
| * cpu.h: New. |
| * Makefile.in: New. |
| * fpu.c: New. |
| * mem.c: New. |
| * config.in: New. |
| * err.h: New. |
| * reg.c: New. |
| * mem.h: New. |
| * main.c: New. |
| * misc.h: New. |
| * trace.c: New. |
| * misc.c: New. |
| * syscall.h: New. |
| * trace.h: New. |
| * fpu.h: New. |
