| # Copyright 1999, 2000, 2002, 2003, 2004, 2005, 2007, 2008 |
| # Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # This file was based on a file written by Fred Fish. (fnf@cygnus.com) |
| |
| # Test setup routines that work with the MI interpreter. |
| |
| # The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt. |
| # Set it if it is not already set. |
| global mi_gdb_prompt |
| if ![info exists mi_gdb_prompt] then { |
| set mi_gdb_prompt "\[(\]gdb\[)\] \r\n" |
| } |
| |
| global mi_inferior_spawn_id |
| global mi_inferior_tty_name |
| |
| set MIFLAGS "-i=mi" |
| |
| # |
| # mi_gdb_exit -- exit the GDB, killing the target program if necessary |
| # |
| proc mi_gdb_exit {} { |
| catch mi_uncatched_gdb_exit |
| } |
| |
| proc mi_uncatched_gdb_exit {} { |
| global GDB |
| global GDBFLAGS |
| global verbose |
| global gdb_spawn_id; |
| global gdb_prompt |
| global mi_gdb_prompt |
| global MIFLAGS |
| |
| gdb_stop_suppressing_tests; |
| |
| if { [info procs sid_exit] != "" } { |
| sid_exit |
| } |
| |
| if ![info exists gdb_spawn_id] { |
| return; |
| } |
| |
| verbose "Quitting $GDB $GDBFLAGS $MIFLAGS" |
| |
| if { [is_remote host] && [board_info host exists fileid] } { |
| send_gdb "999-gdb-exit\n"; |
| gdb_expect 10 { |
| -re "y or n" { |
| send_gdb "y\n"; |
| exp_continue; |
| } |
| -re "Undefined command.*$gdb_prompt $" { |
| send_gdb "quit\n" |
| exp_continue; |
| } |
| -re "DOSEXIT code" { } |
| default { } |
| } |
| } |
| |
| if ![is_remote host] { |
| remote_close host; |
| } |
| unset gdb_spawn_id |
| } |
| |
| # |
| # default_mi_gdb_start [INFERIOR_PTY] -- start gdb running, default procedure |
| # |
| # INFERIOR_PTY should be set to separate-inferior-tty to have the inferior work |
| # with it's own PTY. If set to same-inferior-tty, the inferior shares GDB's PTY. |
| # The default value is same-inferior-tty. |
| # |
| # When running over NFS, particularly if running many simultaneous |
| # tests on different hosts all using the same server, things can |
| # get really slow. Give gdb at least 3 minutes to start up. |
| # |
| proc default_mi_gdb_start { args } { |
| global verbose |
| global GDB |
| global GDBFLAGS |
| global gdb_prompt |
| global mi_gdb_prompt |
| global timeout |
| global gdb_spawn_id; |
| global MIFLAGS |
| |
| gdb_stop_suppressing_tests; |
| set inferior_pty no-tty |
| |
| if { [llength $args] == 1} { |
| set inferior_pty [lindex $args 0] |
| } |
| |
| set separate_inferior_pty [string match $inferior_pty separate-inferior-tty] |
| |
| # Start SID. |
| if { [info procs sid_start] != "" } { |
| verbose "Spawning SID" |
| sid_start |
| } |
| |
| verbose "Spawning $GDB -nw $GDBFLAGS $MIFLAGS" |
| |
| if [info exists gdb_spawn_id] { |
| return 0; |
| } |
| |
| if ![is_remote host] { |
| if { [which $GDB] == 0 } then { |
| perror "$GDB does not exist." |
| exit 1 |
| } |
| } |
| |
| # Create the new PTY for the inferior process. |
| if { $separate_inferior_pty } { |
| spawn -pty |
| global mi_inferior_spawn_id |
| global mi_inferior_tty_name |
| set mi_inferior_spawn_id $spawn_id |
| set mi_inferior_tty_name $spawn_out(slave,name) |
| } |
| |
| set res [remote_spawn host "$GDB -nw $GDBFLAGS $MIFLAGS [host_info gdb_opts]"]; |
| if { $res < 0 || $res == "" } { |
| perror "Spawning $GDB failed." |
| return 1; |
| } |
| gdb_expect { |
| -re "~\"GNU.*\r\n~\".*$mi_gdb_prompt$" { |
| # We have a new format mi startup prompt. If we are |
| # running mi1, then this is an error as we should be |
| # using the old-style prompt. |
| if { $MIFLAGS == "-i=mi1" } { |
| perror "(mi startup) Got unexpected new mi prompt." |
| remote_close host; |
| return -1; |
| } |
| verbose "GDB initialized." |
| } |
| -re "\[^~\].*$mi_gdb_prompt$" { |
| # We have an old format mi startup prompt. If we are |
| # not running mi1, then this is an error as we should be |
| # using the new-style prompt. |
| if { $MIFLAGS != "-i=mi1" } { |
| perror "(mi startup) Got unexpected old mi prompt." |
| remote_close host; |
| return -1; |
| } |
| verbose "GDB initialized." |
| } |
| -re ".*unrecognized option.*for a complete list of options." { |
| untested "Skip mi tests (not compiled with mi support)." |
| remote_close host; |
| return -1; |
| } |
| -re ".*Interpreter `mi' unrecognized." { |
| untested "Skip mi tests (not compiled with mi support)." |
| remote_close host; |
| return -1; |
| } |
| timeout { |
| perror "(timeout) GDB never initialized after 10 seconds." |
| remote_close host; |
| return -1 |
| } |
| } |
| set gdb_spawn_id -1; |
| |
| # FIXME: mi output does not go through pagers, so these can be removed. |
| # force the height to "unlimited", so no pagers get used |
| send_gdb "100-gdb-set height 0\n" |
| gdb_expect 10 { |
| -re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" { |
| verbose "Setting height to 0." 2 |
| } |
| timeout { |
| warning "Couldn't set the height to 0" |
| } |
| } |
| # force the width to "unlimited", so no wraparound occurs |
| send_gdb "101-gdb-set width 0\n" |
| gdb_expect 10 { |
| -re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" { |
| verbose "Setting width to 0." 2 |
| } |
| timeout { |
| warning "Couldn't set the width to 0." |
| } |
| } |
| # If allowing the inferior to have its own PTY then assign the inferior |
| # its own terminal device here. |
| if { $separate_inferior_pty } { |
| send_gdb "102-inferior-tty-set $mi_inferior_tty_name\n" |
| gdb_expect 10 { |
| -re ".*102\\\^done\r\n$mi_gdb_prompt$" { |
| verbose "redirect inferior output to new terminal device." |
| } |
| timeout { |
| warning "Couldn't redirect inferior output." 2 |
| } |
| } |
| } |
| |
| detect_async |
| |
| return 0; |
| } |
| |
| # |
| # Overridable function. You can override this function in your |
| # baseboard file. |
| # |
| proc mi_gdb_start { args } { |
| return [default_mi_gdb_start $args] |
| } |
| |
| # Many of the tests depend on setting breakpoints at various places and |
| # running until that breakpoint is reached. At times, we want to start |
| # with a clean-slate with respect to breakpoints, so this utility proc |
| # lets us do this without duplicating this code everywhere. |
| # |
| |
| proc mi_delete_breakpoints {} { |
| global mi_gdb_prompt |
| |
| # FIXME: The mi operation won't accept a prompt back and will use the 'all' arg |
| send_gdb "102-break-delete\n" |
| gdb_expect 30 { |
| -re "Delete all breakpoints.*y or n.*$" { |
| send_gdb "y\n"; |
| exp_continue |
| } |
| -re "102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" { |
| # This happens if there were no breakpoints |
| } |
| timeout { perror "Delete all breakpoints in mi_delete_breakpoints (timeout)" ; return } |
| } |
| |
| # The correct output is not "No breakpoints or watchpoints." but an |
| # empty BreakpointTable. Also, a query is not acceptable with mi. |
| send_gdb "103-break-list\n" |
| gdb_expect 30 { |
| -re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {} |
| -re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}\r\n$mi_gdb_prompt$" {} |
| -re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"} |
| -re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return } |
| -re "Delete all breakpoints.*or n.*$" { |
| warning "Unexpected prompt for breakpoints deletion"; |
| send_gdb "y\n"; |
| exp_continue |
| } |
| timeout { perror "-break-list (timeout)" ; return } |
| } |
| } |
| |
| proc mi_gdb_reinitialize_dir { subdir } { |
| global mi_gdb_prompt |
| global MIFLAGS |
| |
| global suppress_flag |
| if { $suppress_flag } { |
| return |
| } |
| |
| if [is_remote host] { |
| return ""; |
| } |
| |
| if { $MIFLAGS == "-i=mi1" } { |
| send_gdb "104-environment-directory\n" |
| gdb_expect 60 { |
| -re ".*Reinitialize source path to empty.*y or n. " { |
| warning "Got confirmation prompt for dir reinitialization." |
| send_gdb "y\n" |
| gdb_expect 60 { |
| -re "$mi_gdb_prompt$" {} |
| timeout {error "Dir reinitialization failed (timeout)"} |
| } |
| } |
| -re "$mi_gdb_prompt$" {} |
| timeout {error "Dir reinitialization failed (timeout)"} |
| } |
| } else { |
| send_gdb "104-environment-directory -r\n" |
| gdb_expect 60 { |
| -re "104\\\^done,source-path=.*\r\n$mi_gdb_prompt$" {} |
| -re "$mi_gdb_prompt$" {} |
| timeout {error "Dir reinitialization failed (timeout)"} |
| } |
| } |
| |
| send_gdb "105-environment-directory $subdir\n" |
| gdb_expect 60 { |
| -re "Source directories searched.*$mi_gdb_prompt$" { |
| verbose "Dir set to $subdir" |
| } |
| -re "105\\\^done.*\r\n$mi_gdb_prompt$" { |
| # FIXME: We return just the prompt for now. |
| verbose "Dir set to $subdir" |
| # perror "Dir \"$subdir\" failed." |
| } |
| } |
| } |
| |
| # Send GDB the "target" command. |
| # FIXME: Some of these patterns are not appropriate for MI. Based on |
| # config/monitor.exp:gdb_target_command. |
| proc mi_gdb_target_cmd { targetname serialport } { |
| global mi_gdb_prompt |
| |
| set serialport_re [string_to_regexp $serialport] |
| for {set i 1} {$i <= 3} {incr i} { |
| send_gdb "47-target-select $targetname $serialport\n" |
| gdb_expect 60 { |
| -re "47\\^connected.*$mi_gdb_prompt$" { |
| verbose "Set target to $targetname"; |
| return 0; |
| } |
| -re "unknown host.*$mi_gdb_prompt" { |
| verbose "Couldn't look up $serialport" |
| } |
| -re "Couldn't establish connection to remote.*$mi_gdb_prompt$" { |
| verbose "Connection failed"; |
| } |
| -re "Remote MIPS debugging.*$mi_gdb_prompt$" { |
| verbose "Set target to $targetname"; |
| return 0; |
| } |
| -re "Remote debugging using .*$serialport_re.*$mi_gdb_prompt$" { |
| verbose "Set target to $targetname"; |
| return 0; |
| } |
| -re "Remote target $targetname connected to.*$mi_gdb_prompt$" { |
| verbose "Set target to $targetname"; |
| return 0; |
| } |
| -re "Connected to.*$mi_gdb_prompt$" { |
| verbose "Set target to $targetname"; |
| return 0; |
| } |
| -re "Ending remote.*$mi_gdb_prompt$" { } |
| -re "Connection refused.*$mi_gdb_prompt$" { |
| verbose "Connection refused by remote target. Pausing, and trying again." |
| sleep 5 |
| continue |
| } |
| -re "Timeout reading from remote system.*$mi_gdb_prompt$" { |
| verbose "Got timeout error from gdb."; |
| } |
| timeout { |
| send_gdb ""; |
| break |
| } |
| } |
| } |
| return 1 |
| } |
| |
| # |
| # load a file into the debugger (file command only). |
| # return a -1 if anything goes wrong. |
| # |
| proc mi_gdb_file_cmd { arg } { |
| global verbose |
| global loadpath |
| global loadfile |
| global GDB |
| global mi_gdb_prompt |
| global last_loaded_file |
| upvar timeout timeout |
| |
| set last_loaded_file $arg |
| |
| if [is_remote host] { |
| set arg [remote_download host $arg]; |
| if { $arg == "" } { |
| error "download failed" |
| return -1; |
| } |
| } |
| |
| # FIXME: Several of these patterns are only acceptable for console |
| # output. Queries are an error for mi. |
| send_gdb "105-file-exec-and-symbols $arg\n" |
| gdb_expect 120 { |
| -re "Reading symbols from.*done.*$mi_gdb_prompt$" { |
| verbose "\t\tLoaded $arg into the $GDB" |
| return 0 |
| } |
| -re "has no symbol-table.*$mi_gdb_prompt$" { |
| perror "$arg wasn't compiled with \"-g\"" |
| return -1 |
| } |
| -re "Load new symbol table from \".*\".*y or n. $" { |
| send_gdb "y\n" |
| gdb_expect 120 { |
| -re "Reading symbols from.*done.*$mi_gdb_prompt$" { |
| verbose "\t\tLoaded $arg with new symbol table into $GDB" |
| # All OK |
| } |
| timeout { |
| perror "(timeout) Couldn't load $arg, other program already loaded." |
| return -1 |
| } |
| } |
| } |
| -re "No such file or directory.*$mi_gdb_prompt$" { |
| perror "($arg) No such file or directory\n" |
| return -1 |
| } |
| -re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" { |
| # We (MI) are just giving the prompt back for now, instead of giving |
| # some acknowledgement. |
| return 0 |
| } |
| timeout { |
| perror "couldn't load $arg into $GDB (timed out)." |
| return -1 |
| } |
| eof { |
| # This is an attempt to detect a core dump, but seems not to |
| # work. Perhaps we need to match .* followed by eof, in which |
| # gdb_expect does not seem to have a way to do that. |
| perror "couldn't load $arg into $GDB (end of file)." |
| return -1 |
| } |
| } |
| } |
| |
| # |
| # connect to the target and download a file, if necessary. |
| # return a -1 if anything goes wrong. |
| # |
| proc mi_gdb_target_load { } { |
| global verbose |
| global loadpath |
| global loadfile |
| global GDB |
| global mi_gdb_prompt |
| upvar timeout timeout |
| |
| if { [info procs gdbserver_gdb_load] != "" } { |
| mi_gdb_test "kill" ".*" "" |
| set res [gdbserver_gdb_load] |
| set protocol [lindex $res 0] |
| set gdbport [lindex $res 1] |
| |
| if { [mi_gdb_target_cmd $protocol $gdbport] != 0 } { |
| return -1 |
| } |
| } elseif { [info procs send_target_sid] != "" } { |
| # For SID, things get complex |
| send_gdb "kill\n" |
| gdb_expect 10 { |
| -re ".*$mi_gdb_prompt$" |
| } |
| send_target_sid |
| gdb_expect 60 { |
| -re "\\^done.*$mi_gdb_prompt$" { |
| } |
| timeout { |
| perror "Unable to connect to SID target" |
| return -1 |
| } |
| } |
| send_gdb "48-target-download\n" |
| gdb_expect 10 { |
| -re "48\\^done.*$mi_gdb_prompt$" { |
| } |
| timeout { |
| perror "Unable to download to SID target" |
| return -1 |
| } |
| } |
| } elseif { [target_info protocol] == "sim" } { |
| # For the simulator, just connect to it directly. |
| send_gdb "47-target-select sim\n" |
| gdb_expect 10 { |
| -re "47\\^connected.*$mi_gdb_prompt$" { |
| } |
| timeout { |
| perror "Unable to select sim target" |
| return -1 |
| } |
| } |
| send_gdb "48-target-download\n" |
| gdb_expect 10 { |
| -re "48\\^done.*$mi_gdb_prompt$" { |
| } |
| timeout { |
| perror "Unable to download to sim target" |
| return -1 |
| } |
| } |
| } elseif { [target_info gdb_protocol] == "remote" } { |
| # remote targets |
| if { [mi_gdb_target_cmd "remote" [target_info netport]] != 0 } { |
| perror "Unable to connect to remote target" |
| return -1 |
| } |
| send_gdb "48-target-download\n" |
| gdb_expect 10 { |
| -re "48\\^done.*$mi_gdb_prompt$" { |
| } |
| timeout { |
| perror "Unable to download to remote target" |
| return -1 |
| } |
| } |
| } |
| return 0 |
| } |
| |
| # |
| # load a file into the debugger. |
| # return a -1 if anything goes wrong. |
| # |
| proc mi_gdb_load { arg } { |
| if { $arg != "" } { |
| return [mi_gdb_file_cmd $arg] |
| } |
| return 0 |
| } |
| |
| # mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb; |
| # test the result. |
| # |
| # COMMAND is the command to execute, send to GDB with send_gdb. If |
| # this is the null string no command is sent. |
| # PATTERN is the pattern to match for a PASS, and must NOT include |
| # the \r\n sequence immediately before the gdb prompt. |
| # MESSAGE is the message to be printed. (If this is the empty string, |
| # then sometimes we don't call pass or fail at all; I don't |
| # understand this at all.) |
| # IPATTERN is the pattern to match for the inferior's output. This parameter |
| # is optional. If present, it will produce a PASS if the match is |
| # successful, and a FAIL if unsuccessful. |
| # |
| # Returns: |
| # 1 if the test failed, |
| # 0 if the test passes, |
| # -1 if there was an internal error. |
| # |
| proc mi_gdb_test { args } { |
| global verbose |
| global mi_gdb_prompt |
| global GDB expect_out |
| upvar timeout timeout |
| |
| set command [lindex $args 0] |
| set pattern [lindex $args 1] |
| set message [lindex $args 2] |
| |
| if [llength $args]==4 { |
| set ipattern [lindex $args 3] |
| } |
| |
| if [llength $args]==5 { |
| set question_string [lindex $args 3]; |
| set response_string [lindex $args 4]; |
| } else { |
| set question_string "^FOOBAR$" |
| } |
| |
| if $verbose>2 then { |
| send_user "Sending \"$command\" to gdb\n" |
| send_user "Looking to match \"$pattern\"\n" |
| send_user "Message is \"$message\"\n" |
| } |
| |
| set result -1 |
| set string "${command}\n"; |
| set string_regex [string_to_regexp $command] |
| |
| if { $command != "" } { |
| while { "$string" != "" } { |
| set foo [string first "\n" "$string"]; |
| set len [string length "$string"]; |
| if { $foo < [expr $len - 1] } { |
| set str [string range "$string" 0 $foo]; |
| if { [send_gdb "$str"] != "" } { |
| global suppress_flag; |
| |
| if { ! $suppress_flag } { |
| perror "Couldn't send $command to GDB."; |
| } |
| fail "$message"; |
| return $result; |
| } |
| gdb_expect 2 { |
| -re "\[\r\n\]" { } |
| timeout { } |
| } |
| set string [string range "$string" [expr $foo + 1] end]; |
| } else { |
| break; |
| } |
| } |
| if { "$string" != "" } { |
| if { [send_gdb "$string"] != "" } { |
| global suppress_flag; |
| |
| if { ! $suppress_flag } { |
| perror "Couldn't send $command to GDB."; |
| } |
| fail "$message"; |
| return $result; |
| } |
| } |
| } |
| |
| if [info exists timeout] { |
| set tmt $timeout; |
| } else { |
| global timeout; |
| if [info exists timeout] { |
| set tmt $timeout; |
| } else { |
| set tmt 60; |
| } |
| } |
| verbose -log "Expecting: ^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)" |
| gdb_expect $tmt { |
| -re "\\*\\*\\* DOSEXIT code.*" { |
| if { $message != "" } { |
| fail "$message"; |
| } |
| gdb_suppress_entire_file "GDB died"; |
| return -1; |
| } |
| -re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" { |
| if ![isnative] then { |
| warning "Can`t communicate to remote target." |
| } |
| gdb_exit |
| gdb_start |
| set result -1 |
| } |
| -re "^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)" { |
| # At this point, $expect_out(1,string) is the MI input command. |
| # and $expect_out(2,string) is the MI output command. |
| # If $expect_out(1,string) is "", then there was no MI input command here. |
| |
| # NOTE, there is no trailing anchor because with GDB/MI, |
| # asynchronous responses can happen at any point, causing more |
| # data to be available. Normally an anchor is used to make |
| # sure the end of the output is matched, however, $mi_gdb_prompt |
| # is just as good of an anchor since mi_gdb_test is meant to |
| # match a single mi output command. If a second GDB/MI output |
| # response is sent, it will be in the buffer for the next |
| # time mi_gdb_test is called. |
| if ![string match "" $message] then { |
| pass "$message" |
| } |
| set result 0 |
| } |
| -re "(${question_string})$" { |
| send_gdb "$response_string\n"; |
| exp_continue; |
| } |
| -re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" { |
| perror "Undefined command \"$command\"." |
| fail "$message" |
| set result 1 |
| } |
| -re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" { |
| perror "\"$command\" is not a unique command name." |
| fail "$message" |
| set result 1 |
| } |
| -re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" { |
| if ![string match "" $message] then { |
| set errmsg "$message (the program exited)" |
| } else { |
| set errmsg "$command (the program exited)" |
| } |
| fail "$errmsg" |
| return -1 |
| } |
| -re "The program is not being run.*$mi_gdb_prompt\[ \]*$" { |
| if ![string match "" $message] then { |
| set errmsg "$message (the program is no longer running)" |
| } else { |
| set errmsg "$command (the program is no longer running)" |
| } |
| fail "$errmsg" |
| return -1 |
| } |
| -re ".*$mi_gdb_prompt\[ \]*$" { |
| if ![string match "" $message] then { |
| fail "$message" |
| } |
| set result 1 |
| } |
| "<return>" { |
| send_gdb "\n" |
| perror "Window too small." |
| fail "$message" |
| } |
| -re "\\(y or n\\) " { |
| send_gdb "n\n" |
| perror "Got interactive prompt." |
| fail "$message" |
| } |
| eof { |
| perror "Process no longer exists" |
| if { $message != "" } { |
| fail "$message" |
| } |
| return -1 |
| } |
| full_buffer { |
| perror "internal buffer is full." |
| fail "$message" |
| } |
| timeout { |
| if ![string match "" $message] then { |
| fail "$message (timeout)" |
| } |
| set result 1 |
| } |
| } |
| |
| # If the GDB output matched, compare the inferior output. |
| if { $result == 0 } { |
| if [ info exists ipattern ] { |
| if { ![target_info exists gdb,noinferiorio] } { |
| global mi_inferior_spawn_id |
| expect { |
| -i $mi_inferior_spawn_id -re "$ipattern" { |
| pass "$message inferior output" |
| } |
| timeout { |
| fail "$message inferior output (timeout)" |
| set result 1 |
| } |
| } |
| } else { |
| unsupported "$message inferior output" |
| } |
| } |
| } |
| |
| return $result |
| } |
| |
| # |
| # MI run command. (A modified version of gdb_run_cmd) |
| # |
| |
| # In patterns, the newline sequence ``\r\n'' is matched explicitly as |
| # ``.*$'' could swallow up output that we attempt to match elsewhere. |
| |
| proc mi_run_cmd {args} { |
| global suppress_flag |
| if { $suppress_flag } { |
| return -1 |
| } |
| global mi_gdb_prompt |
| |
| if [target_info exists gdb_init_command] { |
| send_gdb "[target_info gdb_init_command]\n"; |
| gdb_expect 30 { |
| -re "$mi_gdb_prompt$" { } |
| default { |
| perror "gdb_init_command for target failed"; |
| return; |
| } |
| } |
| } |
| |
| if { [mi_gdb_target_load] < 0 } { |
| return |
| } |
| |
| if [target_info exists use_gdb_stub] { |
| if [target_info exists gdb,do_reload_on_run] { |
| send_gdb "220-exec-continue\n"; |
| gdb_expect 60 { |
| -re "220\\^running\[\r\n\]+\\*running,thread-id=\"\[^\"\]+\"\r\n$mi_gdb_prompt$" {} |
| default {} |
| } |
| return; |
| } |
| |
| if [target_info exists gdb,start_symbol] { |
| set start [target_info gdb,start_symbol]; |
| } else { |
| set start "start"; |
| } |
| |
| # HACK: Should either use 000-jump or fix the target code |
| # to better handle RUN. |
| send_gdb "jump *$start\n" |
| warning "Using CLI jump command, expect run-to-main FAIL" |
| return |
| } |
| |
| send_gdb "220-exec-run $args\n" |
| gdb_expect { |
| -re "220\\^running\r\n(\\*running,thread-id=\"\[^\"\]+\"\r\n|=thread-created,id=\"1\"\r\n)*${mi_gdb_prompt}" { |
| } |
| timeout { |
| perror "Unable to start target" |
| return |
| } |
| } |
| # NOTE: Shortly after this there will be a ``000*stopped,...(gdb)'' |
| } |
| |
| # |
| # Just like run-to-main but works with the MI interface |
| # |
| |
| proc mi_run_to_main { } { |
| global suppress_flag |
| if { $suppress_flag } { |
| return -1 |
| } |
| |
| global srcdir |
| global subdir |
| global binfile |
| global srcfile |
| |
| mi_delete_breakpoints |
| mi_gdb_reinitialize_dir $srcdir/$subdir |
| mi_gdb_load ${binfile} |
| |
| mi_runto main |
| } |
| |
| |
| # Just like gdb's "runto" proc, it will run the target to a given |
| # function. The big difference here between mi_runto and mi_execute_to |
| # is that mi_execute_to must have the inferior running already. This |
| # proc will (like gdb's runto) (re)start the inferior, too. |
| # |
| # FUNC is the linespec of the place to stop (it inserts a breakpoint here). |
| # It returns: |
| # -1 if test suppressed, failed, timedout |
| # 0 if test passed |
| |
| proc mi_runto_helper {func run_or_continue} { |
| global suppress_flag |
| if { $suppress_flag } { |
| return -1 |
| } |
| |
| global mi_gdb_prompt expect_out |
| global hex decimal fullname_syntax |
| |
| set test "mi runto $func" |
| mi_gdb_test "200-break-insert -t $func" \ |
| "200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"$func\(\\\(.*\\\)\)?\",file=\".*\",line=\"\[0-9\]*\",times=\"0\",original-location=\".*\"\}" \ |
| "breakpoint at $func" |
| |
| if {![regexp {number="[0-9]+"} $expect_out(buffer) str] |
| || ![scan $str {number="%d"} bkptno]} { |
| set bkptno {[0-9]+} |
| } |
| |
| if {$run_or_continue == "run"} { |
| mi_run_cmd |
| } else { |
| mi_send_resuming_command "exec-continue" "$test" |
| } |
| |
| mi_expect_stop "breakpoint-hit" $func ".*" ".*" "\[0-9\]+" { "" "disp=\"del\"" } $test |
| } |
| |
| proc mi_runto {func} { |
| mi_runto_helper $func "run" |
| } |
| |
| # Next to the next statement |
| # For return values, see mi_execute_to_helper |
| |
| proc mi_next { test } { |
| return [mi_next_to {.*} {.*} {.*} {.*} $test] |
| } |
| |
| |
| # Step to the next statement |
| # For return values, see mi_execute_to_helper |
| |
| proc mi_step { test } { |
| return [mi_step_to {.*} {.*} {.*} {.*} $test] |
| } |
| |
| set async "unknown" |
| |
| proc detect_async {} { |
| global async |
| global mi_gdb_prompt |
| |
| send_gdb "show target-async\n" |
| |
| gdb_expect { |
| -re ".*Controlling the inferior in asynchronous mode is on...*$mi_gdb_prompt$" { |
| set async 1 |
| } |
| -re ".*$mi_gdb_prompt$" { |
| set async 0 |
| } |
| timeout { |
| set async 0 |
| } |
| } |
| return $async |
| } |
| |
| # Wait for MI *stopped notification to appear. |
| # The REASON, FUNC, ARGS, FILE and LINE are regular expressions |
| # to match against whatever is output in *stopped. ARGS should |
| # not include [] the list of argument is enclosed in, and other |
| # regular expressions should not include quotes. |
| # If EXTRA is a list of one element, it's the regular expression |
| # for output expected right after *stopped, and before GDB prompt. |
| # If EXTRA is a list of two elements, the first element is for |
| # output right after *stopped, and the second element is output |
| # right after reason field. The regex after reason should not include |
| # the comma separating it from the following fields. |
| # |
| # When we fail to match output at all, -1 is returned. Otherwise, |
| # the line at which we stop is returned. This is useful when exact |
| # line is not possible to specify for some reason -- one can pass |
| # the .* regexp for line, and then check the line programmatically. |
| proc mi_expect_stop { reason func args file line extra test } { |
| |
| global mi_gdb_prompt |
| global hex |
| global decimal |
| global fullname_syntax |
| global async |
| |
| set after_stopped "" |
| set after_reason "" |
| if { [llength $extra] == 2 } { |
| set after_stopped [lindex $extra 0] |
| set after_reason [lindex $extra 1] |
| set after_reason "${after_reason}," |
| } elseif { [llength $extra] == 1 } { |
| set after_stopped [lindex $extra 0] |
| } |
| |
| if {$async} { |
| set prompt_re "" |
| } else { |
| set prompt_re "$mi_gdb_prompt" |
| } |
| |
| if { $reason == "really-no-reason" } { |
| gdb_expect { |
| -re "\\*stopped\r\n$prompt_re$" { |
| pass "$test" |
| } |
| timeout { |
| fail "$test (unknown output after running)" |
| } |
| } |
| return |
| } |
| |
| if { $reason == "exited-normally" } { |
| |
| gdb_expect { |
| -re "\\*stopped,reason=\"exited-normally\"\r\n$prompt_re$" { |
| pass "$test" |
| } |
| -re ".*$mi_gdb_prompt$" {fail "continue to end (2)"} |
| timeout { |
| fail "$test (unknown output after running)" |
| } |
| } |
| return |
| } |
| |
| set args "\\\[$args\\\]" |
| |
| set bn "" |
| if { $reason == "breakpoint-hit" } { |
| set bn {bkptno="[0-9]+",} |
| } |
| |
| set r "" |
| if { $reason != "" } { |
| set r "reason=\"$reason\"," |
| } |
| |
| |
| set a $after_reason |
| |
| verbose -log "mi_expect_stop: expecting: \\*stopped,${r}${a}${bn}thread-id=\"$decimal\",stopped-threads=.*,frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\"\}\r\n$after_stopped$prompt_re$" |
| gdb_expect { |
| -re "\\*stopped,${r}${a}${bn}thread-id=\"$decimal\",stopped-threads=.*,frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"($line)\"\}$after_stopped\r\n$prompt_re$" { |
| pass "$test" |
| return $expect_out(2,string) |
| } |
| -re "\\*stopped,${r}${a}${bn}thread-id=\"$decimal\",stopped-threads=.*,frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}.*\r\n$prompt_re$" { |
| verbose -log "got $expect_out(buffer)" |
| fail "$test (stopped at wrong place)" |
| return -1 |
| } |
| -re ".*\r\n$mi_gdb_prompt$" { |
| verbose -log "got $expect_out(buffer)" |
| fail "$test (unknown output after running)" |
| return -1 |
| } |
| timeout { |
| fail "$test (timeout)" |
| return -1 |
| } |
| } |
| } |
| |
| # cmd should not include the number or newline (i.e. "exec-step 3", not |
| # "220-exec-step 3\n" |
| |
| # Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives |
| # after the first prompt is printed. |
| |
| proc mi_execute_to { cmd reason func args file line extra test } { |
| global suppress_flag |
| if { $suppress_flag } { |
| return -1 |
| } |
| |
| mi_send_resuming_command "$cmd" "$test" |
| set r [mi_expect_stop $reason $func $args $file $line $extra $test] |
| return $r |
| } |
| |
| proc mi_next_to { func args file line test } { |
| mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \ |
| "$file" "$line" "" "$test" |
| } |
| |
| proc mi_step_to { func args file line test } { |
| mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \ |
| "$file" "$line" "" "$test" |
| } |
| |
| proc mi_finish_to { func args file line result ret test } { |
| mi_execute_to "exec-finish" "function-finished" "$func" "$args" \ |
| "$file" "$line" \ |
| ",gdb-result-var=\"$result\",return-value=\"$ret\"" \ |
| "$test" |
| } |
| |
| proc mi_continue_to {func} { |
| mi_runto_helper $func "continue" |
| } |
| |
| proc mi0_execute_to { cmd reason func args file line extra test } { |
| mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \ |
| "$file" "$line" "$extra" "$test" |
| } |
| |
| proc mi0_next_to { func args file line test } { |
| mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \ |
| "$file" "$line" "" "$test" |
| } |
| |
| proc mi0_step_to { func args file line test } { |
| mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \ |
| "$file" "$line" "" "$test" |
| } |
| |
| proc mi0_finish_to { func args file line result ret test } { |
| mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \ |
| "$file" "$line" \ |
| ",gdb-result-var=\"$result\",return-value=\"$ret\"" \ |
| "$test" |
| } |
| |
| proc mi0_continue_to { bkptno func args file line test } { |
| mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \ |
| "$func" "$args" "$file" "$line" "" "$test" |
| } |
| |
| # Creates a breakpoint and checks the reported fields are as expected |
| proc mi_create_breakpoint { location number disp func file line address test } { |
| verbose -log "Expecting: 222\\^done,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",fullname=\".*\",line=\"$line\",times=\"0\",original-location=\".*\"\}" |
| mi_gdb_test "222-break-insert $location" \ |
| "222\\^done,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",fullname=\".*\",line=\"$line\",times=\"0\",original-location=\".*\"\}" \ |
| $test |
| } |
| |
| proc mi_list_breakpoints { expected test } { |
| set fullname ".*" |
| |
| set body "" |
| set first 1 |
| |
| foreach item $children { |
| if {$first == 0} { |
| set body "$body," |
| } |
| set number disp func file line address |
| set number [lindex $item 0] |
| set disp [lindex $item 1] |
| set func [lindex $item 2] |
| set line [lindex $item 3] |
| set address [lindex $item 4] |
| set body "$body,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",${fullname},line=\"$line\",times=\"0\",original-location=\".*\"\}" |
| set first 0 |
| } |
| |
| verbose -log "Expecint: 666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[$body\\\]\}" \ |
| mi_gdb_test "666-break-list" \ |
| "666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[$body\\\]\}" \ |
| $test |
| } |
| |
| # Creates varobj named NAME for EXPRESSION. |
| # Name cannot be "-". |
| proc mi_create_varobj { name expression testname } { |
| mi_gdb_test "-var-create $name * $expression" \ |
| "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*" \ |
| $testname |
| } |
| |
| proc mi_create_floating_varobj { name expression testname } { |
| mi_gdb_test "-var-create $name @ $expression" \ |
| "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*" \ |
| $testname |
| } |
| |
| |
| # Same as mi_create_varobj, but also checks the reported type |
| # of the varobj. |
| proc mi_create_varobj_checked { name expression type testname } { |
| mi_gdb_test "-var-create $name * $expression" \ |
| "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=\"$type\".*" \ |
| $testname |
| } |
| |
| # Deletes the specified NAME. |
| proc mi_delete_varobj { name testname } { |
| mi_gdb_test "-var-delete $name" \ |
| "\\^done,ndeleted=.*" \ |
| $testname |
| } |
| |
| # Updates varobj named NAME and checks that all varobjs in EXPECTED |
| # are reported as updated, and no other varobj is updated. |
| # Assumes that no varobj is out of scope and that no varobj changes |
| # types. |
| proc mi_varobj_update { name expected testname } { |
| set er "\\^done,changelist=\\\[" |
| set first 1 |
| foreach item $expected { |
| set v "{name=\"$item\",in_scope=\"true\",type_changed=\"false\"}" |
| if {$first == 1} { |
| set er "$er$v" |
| set first 0 |
| } else { |
| set er "$er,$v" |
| } |
| } |
| set er "$er\\\]" |
| |
| verbose -log "Expecting: $er" 2 |
| mi_gdb_test "-var-update $name" $er $testname |
| } |
| |
| proc mi_varobj_update_with_type_change { name new_type new_children testname } { |
| set v "{name=\"$name\",in_scope=\"true\",type_changed=\"true\",new_type=\"$new_type\",new_num_children=\"$new_children\"}" |
| set er "\\^done,changelist=\\\[$v\\\]" |
| verbose -log "Expecting: $er" |
| mi_gdb_test "-var-update $name" $er $testname |
| } |
| |
| proc mi_check_varobj_value { name value testname } { |
| |
| mi_gdb_test "-var-evaluate-expression $name" \ |
| "\\^done,value=\"$value\"" \ |
| $testname |
| } |
| |
| # Check the results of the: |
| # |
| # -var-list-children VARNAME |
| # |
| # command. The CHILDREN parement should be a list of lists. |
| # Each inner list can have either 3 or 4 elements, describing |
| # fields that gdb is expected to report for child variable object, |
| # in the following order |
| # |
| # - Name |
| # - Expression |
| # - Number of children |
| # - Type |
| # |
| # If inner list has 3 elements, the gdb is expected to output no |
| # type for a child and no value. |
| # |
| # If the inner list has 4 elements, gdb output is expected to |
| # have no value. |
| # |
| proc mi_list_varobj_children { varname children testname } { |
| |
| set options "" |
| if {[llength $varname] == 2} { |
| set options [lindex $varname 1] |
| set varname [lindex $varname 0] |
| } |
| |
| set numchildren [llength $children] |
| set children_exp {} |
| set whatever "\"\[^\"\]+\"" |
| |
| foreach item $children { |
| |
| set name [lindex $item 0] |
| set exp [lindex $item 1] |
| set numchild [lindex $item 2] |
| if {[llength $item] == 5} { |
| set type [lindex $item 3] |
| set value [lindex $item 4] |
| |
| lappend children_exp\ |
| "child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",value=\"$value\",type=\"$type\"\(,thread-id=\"\[0-9\]+\")?}" |
| } elseif {[llength $item] == 4} { |
| set type [lindex $item 3] |
| |
| lappend children_exp\ |
| "child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",type=\"$type\"\(,thread-id=\"\[0-9\]+\")?}" |
| } else { |
| lappend children_exp\ |
| "child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\"(,thread-id=\"\[0-9\]+\")?}" |
| } |
| } |
| set children_exp_j [join $children_exp ","] |
| if {$numchildren} { |
| set expected "\\^done,numchild=\".*\",children=\\\[$children_exp_j.*\\\]" |
| } { |
| set expected "\\^done,numchild=\"0\"" |
| } |
| |
| verbose -log "Expecting: $expected" |
| |
| mi_gdb_test "-var-list-children $options $varname" $expected $testname |
| } |
| |
| # Verifies that variable object VARNAME has NUMBER children, |
| # where each one is named $VARNAME.<index-of-child> and has type TYPE. |
| proc mi_list_array_varobj_children { varname number type testname } { |
| set t {} |
| for {set i 0} {$i < $number} {incr i} { |
| lappend t [list $varname.$i $i 0 $type] |
| } |
| mi_list_varobj_children $varname $t $testname |
| } |
| |
| # A list of two-element lists. First element of each list is |
| # a Tcl statement, and the second element is the line |
| # number of source C file where the statement originates. |
| set mi_autotest_data "" |
| # The name of the source file for autotesting. |
| set mi_autotest_source "" |
| |
| proc count_newlines { string } { |
| return [regexp -all "\n" $string] |
| } |
| |
| # Prepares for running inline tests in FILENAME. |
| # See comments for mi_run_inline_test for detailed |
| # explanation of the idea and syntax. |
| proc mi_prepare_inline_tests { filename } { |
| |
| global srcdir |
| global subdir |
| global mi_autotest_source |
| global mi_autotest_data |
| |
| set mi_autotest_data {} |
| |
| set mi_autotest_source $filename |
| |
| if { ! [regexp "^/" "$filename"] } then { |
| set filename "$srcdir/$subdir/$filename" |
| } |
| |
| set chan [open $filename] |
| set content [read $chan] |
| set line_number 1 |
| while {1} { |
| set start [string first "/*:" $content] |
| if {$start != -1} { |
| set end [string first ":*/" $content] |
| if {$end == -1} { |
| error "Unterminated special comment in $filename" |
| } |
| |
| set prefix [string range $content 0 $start] |
| set prefix_newlines [count_newlines $prefix] |
| |
| set line_number [expr $line_number+$prefix_newlines] |
| set comment_line $line_number |
| |
| set comment [string range $content [expr $start+3] [expr $end-1]] |
| |
| set comment_newlines [count_newlines $comment] |
| set line_number [expr $line_number+$comment_newlines] |
| |
| set comment [string trim $comment] |
| set content [string range $content [expr $end+3] \ |
| [string length $content]] |
| lappend mi_autotest_data [list $comment $comment_line] |
| } else { |
| break |
| } |
| } |
| close $chan |
| } |
| |
| # Helper to mi_run_inline_test below. |
| # Return the list of all (statement,line_number) lists |
| # that comprise TESTCASE. The begin and end markers |
| # are not included. |
| proc mi_get_inline_test {testcase} { |
| |
| global mi_gdb_prompt |
| global mi_autotest_data |
| global mi_autotest_source |
| |
| set result {} |
| |
| set seen_begin 0 |
| set seen_end 0 |
| foreach l $mi_autotest_data { |
| |
| set comment [lindex $l 0] |
| |
| if {$comment == "BEGIN: $testcase"} { |
| set seen_begin 1 |
| } elseif {$comment == "END: $testcase"} { |
| set seen_end 1 |
| break |
| } elseif {$seen_begin==1} { |
| lappend result $l |
| } |
| } |
| |
| if {$seen_begin == 0} { |
| error "Autotest $testcase not found" |
| } |
| |
| if {$seen_begin == 1 && $seen_end == 0} { |
| error "Missing end marker for test $testcase" |
| } |
| |
| return $result |
| } |
| |
| # Sets temporary breakpoint at LOCATION. |
| proc mi_tbreak {location} { |
| |
| global mi_gdb_prompt |
| |
| mi_gdb_test "-break-insert -t $location" \ |
| {\^done,bkpt=.*} \ |
| "run to $location (set breakpoint)" |
| } |
| |
| # Send COMMAND that must be a command that resumes |
| # the inferiour (run/continue/next/etc) and consumes |
| # the "^running" output from it. |
| proc mi_send_resuming_command_raw {command test} { |
| |
| global mi_gdb_prompt |
| |
| send_gdb "$command\n" |
| gdb_expect { |
| -re "\\^running\r\n\\*running,thread-id=\"\[^\"\]+\"\r\n${mi_gdb_prompt}" { |
| # Note that lack of 'pass' call here -- this works around limitation |
| # in DejaGNU xfail mechanism. mi-until.exp has this: |
| # |
| # setup_kfail gdb/2104 "*-*-*" |
| # mi_execute_to ... |
| # |
| # and mi_execute_to uses mi_send_resuming_command. If we use 'pass' here, |
| # it will reset kfail, so when the actual test fails, it will be flagged |
| # as real failure. |
| } |
| -re ".*${mi_gdb_prompt}" { |
| fail "$test (failed to resume)" |
| } |
| -re "\\^error,msg=.*" { |
| fail "$test (MI error)" |
| return -1 |
| } |
| timeout { |
| fail "$test" |
| return -1 |
| } |
| } |
| } |
| |
| proc mi_send_resuming_command {command test} { |
| mi_send_resuming_command_raw -$command $test |
| } |
| |
| # Helper to mi_run_inline_test below. |
| # Sets a temporary breakpoint at LOCATION and runs |
| # the program using COMMAND. When the program is stopped |
| # returns the line at which it. Returns -1 if line cannot |
| # be determined. |
| # Does not check that the line is the same as requested. |
| # The caller can check itself if required. |
| proc mi_continue_to_line {location test} { |
| |
| mi_tbreak $location |
| mi_send_resuming_command "exec-continue" "run to $location (exec-continue)" |
| return [mi_get_stop_line $test] |
| } |
| |
| # Wait until gdb prints the current line. |
| proc mi_get_stop_line {test} { |
| |
| global mi_gdb_prompt |
| global async |
| |
| if {$async} { |
| set prompt_re "" |
| } else { |
| set prompt_re "$mi_gdb_prompt" |
| } |
| |
| gdb_expect { |
| -re ".*line=\"(.*)\".*\r\n$prompt_re$" { |
| return $expect_out(1,string) |
| } |
| -re ".*$mi_gdb_prompt$" { |
| fail "wait for stop ($test)" |
| } |
| timeout { |
| fail "wait for stop ($test)" |
| } |
| } |
| } |
| |
| # Run a MI test embedded in comments in a C file. |
| # The C file should contain special comments in the following |
| # three forms: |
| # |
| # /*: BEGIN: testname :*/ |
| # /*: <Tcl statements> :*/ |
| # /*: END: testname :*/ |
| # |
| # This procedure find the begin and end marker for the requested |
| # test. Then, a temporary breakpoint is set at the begin |
| # marker and the program is run (from start). |
| # |
| # After that, for each special comment between the begin and end |
| # marker, the Tcl statements are executed. It is assumed that |
| # for each comment, the immediately preceding line is executable |
| # C statement. Then, gdb will be single-stepped until that |
| # preceding C statement is executed, and after that the |
| # Tcl statements in the comment will be executed. |
| # |
| # For example: |
| # |
| # /*: BEGIN: assignment-test :*/ |
| # v = 10; |
| # /*: <Tcl code to check that 'v' is indeed 10 :*/ |
| # /*: END: assignment-test :*/ |
| # |
| # The mi_prepare_inline_tests function should be called before |
| # calling this function. A given C file can contain several |
| # inline tests. The names of the tests must be unique within one |
| # C file. |
| # |
| proc mi_run_inline_test { testcase } { |
| |
| global mi_gdb_prompt |
| global hex |
| global decimal |
| global fullname_syntax |
| global mi_autotest_source |
| |
| set commands [mi_get_inline_test $testcase] |
| |
| set first 1 |
| set line_now 1 |
| |
| foreach c $commands { |
| set statements [lindex $c 0] |
| set line [lindex $c 1] |
| set line [expr $line-1] |
| |
| # We want gdb to be stopped at the expression immediately |
| # before the comment. If this is the first comment, the |
| # program is either not started yet or is in some random place, |
| # so we run it. For further comments, we might be already |
| # standing at the right line. If not continue till the |
| # right line. |
| |
| if {$first==1} { |
| # Start the program afresh. |
| mi_tbreak "$mi_autotest_source:$line" |
| mi_run_cmd |
| set line_now [mi_get_stop_line "$testcase: step to $line"] |
| set first 0 |
| } elseif {$line_now!=$line} { |
| set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"] |
| } |
| |
| if {$line_now!=$line} { |
| fail "$testcase: go to line $line" |
| } |
| |
| # We're not at the statement right above the comment. |
| # Execute that statement so that the comment can test |
| # the state after the statement is executed. |
| |
| # Single-step past the line. |
| mi_send_resuming_command "exec-next" "$testcase: step over $line" |
| set line_now [mi_get_stop_line "$testcase: step over $line"] |
| |
| # We probably want to use 'uplevel' so that statements |
| # have direct access to global variables that the |
| # main 'exp' file has set up. But it's not yet clear, |
| # will need more experience to be sure. |
| eval $statements |
| } |
| } |
| |
| proc get_mi_thread_list {name} { |
| global expect_out |
| |
| # MI will return a list of thread ids: |
| # |
| # -thread-list-ids |
| # ^done,thread-ids=[thread-id="1",thread-id="2",...],number-of-threads="N" |
| # (gdb) |
| mi_gdb_test "-thread-list-ids" \ |
| {.*\^done,thread-ids={(thread-id="[0-9]+"(,)?)+},number-of-threads="[0-9]+"} \ |
| "-thread_list_ids ($name)" |
| |
| set output {} |
| if {[info exists expect_out(buffer)]} { |
| set output $expect_out(buffer) |
| } |
| |
| set thread_list {} |
| if {![regexp {thread-ids=\{(thread-id="[0-9]+"(,)?)*\}} $output threads]} { |
| fail "finding threads in MI output ($name)" |
| } else { |
| pass "finding threads in MI output ($name)" |
| |
| # Make list of console threads |
| set start [expr {[string first \{ $threads] + 1}] |
| set end [expr {[string first \} $threads] - 1}] |
| set threads [string range $threads $start $end] |
| foreach thread [split $threads ,] { |
| if {[scan $thread {thread-id="%d"} num]} { |
| lappend thread_list $num |
| } |
| } |
| } |
| |
| return $thread_list |
| } |
| |
| # Check that MI and the console know of the same threads. |
| # Appends NAME to all test names. |
| proc check_mi_and_console_threads {name} { |
| global expect_out |
| |
| mi_gdb_test "-thread-list-ids" \ |
| {.*\^done,thread-ids={(thread-id="[0-9]+"(,)*)+},number-of-threads="[0-9]+"} \ |
| "-thread-list-ids ($name)" |
| set mi_output {} |
| if {[info exists expect_out(buffer)]} { |
| set mi_output $expect_out(buffer) |
| } |
| |
| # GDB will return a list of thread ids and some more info: |
| # |
| # (gdb) |
| # -interpreter-exec console "info threads" |
| # ~" 4 Thread 2051 (LWP 7734) 0x401166b1 in __libc_nanosleep () at __libc_nanosleep:-1" |
| # ~" 3 Thread 1026 (LWP 7733) () at __libc_nanosleep:-1" |
| # ~" 2 Thread 2049 (LWP 7732) 0x401411f8 in __poll (fds=0x804bb24, nfds=1, timeout=2000) at ../sysdeps/unix/sysv/linux/poll.c:63" |
| # ~"* 1 Thread 1024 (LWP 7731) main (argc=1, argv=0xbfffdd94) at ../../../src/gdb/testsuite/gdb.mi/pthreads.c:160" |
| # FIXME: kseitz/2002-09-05: Don't use the hack-cli method. |
| mi_gdb_test "info threads" \ |
| {.*(~".*"[\r\n]*)+.*} \ |
| "info threads ($name)" |
| set console_output {} |
| if {[info exists expect_out(buffer)]} { |
| set console_output $expect_out(buffer) |
| } |
| |
| # Make a list of all known threads to console (gdb's thread IDs) |
| set console_thread_list {} |
| foreach line [split $console_output \n] { |
| if {[string index $line 0] == "~"} { |
| # This is a line from the console; trim off "~", " ", "*", and "\"" |
| set line [string trim $line ~\ \"\*] |
| if {[scan $line "%d" id] == 1} { |
| lappend console_thread_list $id |
| } |
| } |
| } |
| |
| # Now find the result string from MI |
| set mi_result "" |
| foreach line [split $mi_output \n] { |
| if {[string range $line 0 4] == "^done"} { |
| set mi_result $line |
| } |
| } |
| if {$mi_result == ""} { |
| fail "finding MI result string ($name)" |
| } else { |
| pass "finding MI result string ($name)" |
| } |
| |
| # Finally, extract the thread ids and compare them to the console |
| set num_mi_threads_str "" |
| if {![regexp {number-of-threads="[0-9]+"} $mi_result num_mi_threads_str]} { |
| fail "finding number of threads in MI output ($name)" |
| } else { |
| pass "finding number of threads in MI output ($name)" |
| |
| # Extract the number of threads from the MI result |
| if {![scan $num_mi_threads_str {number-of-threads="%d"} num_mi_threads]} { |
| fail "got number of threads from MI ($name)" |
| } else { |
| pass "got number of threads from MI ($name)" |
| |
| # Check if MI and console have same number of threads |
| if {$num_mi_threads != [llength $console_thread_list]} { |
| fail "console and MI have same number of threads ($name)" |
| } else { |
| pass "console and MI have same number of threads ($name)" |
| |
| # Get MI thread list |
| set mi_thread_list [get_mi_thread_list $name] |
| |
| # Check if MI and console have the same threads |
| set fails 0 |
| foreach ct [lsort $console_thread_list] mt [lsort $mi_thread_list] { |
| if {$ct != $mt} { |
| incr fails |
| } |
| } |
| if {$fails > 0} { |
| fail "MI and console have same threads ($name)" |
| |
| # Send a list of failures to the log |
| send_log "Console has thread ids: $console_thread_list\n" |
| send_log "MI has thread ids: $mi_thread_list\n" |
| } else { |
| pass "MI and console have same threads ($name)" |
| } |
| } |
| } |
| } |
| } |
| |
| proc mi_load_shlibs { args } { |
| if {![is_remote target]} { |
| return |
| } |
| |
| foreach file $args { |
| gdb_download $file |
| } |
| |
| # Even if the target supplies full paths for shared libraries, |
| # they may not be paths for this system. |
| mi_gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "\^done" "" |
| } |
| |