/* Main code for remote server for GDB.
   Copyright (C) 1989-2016 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#include "server.h"
#include "gdbthread.h"
#include "agent.h"
#include "notif.h"
#include "tdesc.h"
#include "rsp-low.h"

#include <ctype.h>
#include <unistd.h>
#if HAVE_SIGNAL_H
#include <signal.h>
#endif
#include "gdb_vecs.h"
#include "gdb_wait.h"
#include "btrace-common.h"
#include "filestuff.h"
#include "tracepoint.h"
#include "dll.h"
#include "hostio.h"

/* The thread set with an `Hc' packet.  `Hc' is deprecated in favor of
   `vCont'.  Note the multi-process extensions made `vCont' a
   requirement, so `Hc pPID.TID' is pretty much undefined.  So
   CONT_THREAD can be null_ptid for no `Hc' thread, minus_one_ptid for
   resuming all threads of the process (again, `Hc' isn't used for
   multi-process), or a specific thread ptid_t.  */
ptid_t cont_thread;

/* The thread set with an `Hg' packet.  */
ptid_t general_thread;

int server_waiting;

static int extended_protocol;
static int response_needed;
static int exit_requested;

/* --once: Exit after the first connection has closed.  */
int run_once;

int multi_process;
int report_fork_events;
int report_vfork_events;
int report_exec_events;
int report_thread_events;

/* Whether to report TARGET_WAITKING_NO_RESUMED events.  */
static int report_no_resumed;

int non_stop;
int swbreak_feature;
int hwbreak_feature;

/* True if the "vContSupported" feature is active.  In that case, GDB
   wants us to report whether single step is supported in the reply to
   "vCont?" packet.  */
static int vCont_supported;

/* Whether we should attempt to disable the operating system's address
   space randomization feature before starting an inferior.  */
int disable_randomization = 1;

static char **program_argv, **wrapper_argv;

int pass_signals[GDB_SIGNAL_LAST];
int program_signals[GDB_SIGNAL_LAST];
int program_signals_p;

/* The PID of the originally created or attached inferior.  Used to
   send signals to the process when GDB sends us an asynchronous interrupt
   (user hitting Control-C in the client), and to wait for the child to exit
   when no longer debugging it.  */

unsigned long signal_pid;

#ifdef SIGTTOU
/* A file descriptor for the controlling terminal.  */
int terminal_fd;

/* TERMINAL_FD's original foreground group.  */
pid_t old_foreground_pgrp;

/* Hand back terminal ownership to the original foreground group.  */

static void
restore_old_foreground_pgrp (void)
{
  tcsetpgrp (terminal_fd, old_foreground_pgrp);
}
#endif

/* Set if you want to disable optional thread related packets support
   in gdbserver, for the sake of testing GDB against stubs that don't
   support them.  */
int disable_packet_vCont;
int disable_packet_Tthread;
int disable_packet_qC;
int disable_packet_qfThreadInfo;

/* Last status reported to GDB.  */
static struct target_waitstatus last_status;
static ptid_t last_ptid;

char *own_buf;
static unsigned char *mem_buf;

/* A sub-class of 'struct notif_event' for stop, holding information
   relative to a single stop reply.  We keep a queue of these to
   push to GDB in non-stop mode.  */

struct vstop_notif
{
  struct notif_event base;

  /* Thread or process that got the event.  */
  ptid_t ptid;

  /* Event info.  */
  struct target_waitstatus status;
};

/* The current btrace configuration.  This is gdbserver's mirror of GDB's
   btrace configuration.  */
static struct btrace_config current_btrace_conf;

DEFINE_QUEUE_P (notif_event_p);

/* Put a stop reply to the stop reply queue.  */

static void
queue_stop_reply (ptid_t ptid, struct target_waitstatus *status)
{
  struct vstop_notif *new_notif = XNEW (struct vstop_notif);

  new_notif->ptid = ptid;
  new_notif->status = *status;

  notif_event_enque (&notif_stop, (struct notif_event *) new_notif);
}

static int
remove_all_on_match_ptid (QUEUE (notif_event_p) *q,
			  QUEUE_ITER (notif_event_p) *iter,
			  struct notif_event *event,
			  void *data)
{
  ptid_t filter_ptid = *(ptid_t *) data;
  struct vstop_notif *vstop_event = (struct vstop_notif *) event;

  if (ptid_match (vstop_event->ptid, filter_ptid))
    {
      if (q->free_func != NULL)
	q->free_func (event);

      QUEUE_remove_elem (notif_event_p, q, iter);
    }

  return 1;
}

/* See server.h.  */

void
discard_queued_stop_replies (ptid_t ptid)
{
  QUEUE_iterate (notif_event_p, notif_stop.queue,
		 remove_all_on_match_ptid, &ptid);
}

static void
vstop_notif_reply (struct notif_event *event, char *own_buf)
{
  struct vstop_notif *vstop = (struct vstop_notif *) event;

  prepare_resume_reply (own_buf, vstop->ptid, &vstop->status);
}

struct notif_server notif_stop =
{
  "vStopped", "Stop", NULL, vstop_notif_reply,
};

static int
target_running (void)
{
  return get_first_thread () != NULL;
}

static int
start_inferior (char **argv)
{
  char **new_argv = argv;

  if (wrapper_argv != NULL)
    {
      int i, count = 1;

      for (i = 0; wrapper_argv[i] != NULL; i++)
	count++;
      for (i = 0; argv[i] != NULL; i++)
	count++;
      new_argv = XALLOCAVEC (char *, count);
      count = 0;
      for (i = 0; wrapper_argv[i] != NULL; i++)
	new_argv[count++] = wrapper_argv[i];
      for (i = 0; argv[i] != NULL; i++)
	new_argv[count++] = argv[i];
      new_argv[count] = NULL;
    }

  if (debug_threads)
    {
      int i;
      for (i = 0; new_argv[i]; ++i)
	debug_printf ("new_argv[%d] = \"%s\"\n", i, new_argv[i]);
      debug_flush ();
    }

#ifdef SIGTTOU
  signal (SIGTTOU, SIG_DFL);
  signal (SIGTTIN, SIG_DFL);
#endif

  signal_pid = create_inferior (new_argv[0], new_argv);

  /* FIXME: we don't actually know at this point that the create
     actually succeeded.  We won't know that until we wait.  */
  fprintf (stderr, "Process %s created; pid = %ld\n", argv[0],
	   signal_pid);
  fflush (stderr);

#ifdef SIGTTOU
  signal (SIGTTOU, SIG_IGN);
  signal (SIGTTIN, SIG_IGN);
  terminal_fd = fileno (stderr);
  old_foreground_pgrp = tcgetpgrp (terminal_fd);
  tcsetpgrp (terminal_fd, signal_pid);
  atexit (restore_old_foreground_pgrp);
#endif

  if (wrapper_argv != NULL)
    {
      struct thread_resume resume_info;

      memset (&resume_info, 0, sizeof (resume_info));
      resume_info.thread = pid_to_ptid (signal_pid);
      resume_info.kind = resume_continue;
      resume_info.sig = 0;

      last_ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);

      if (last_status.kind == TARGET_WAITKIND_STOPPED)
	{
	  do
	    {
	      (*the_target->resume) (&resume_info, 1);

	      last_ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);
	      if (last_status.kind != TARGET_WAITKIND_STOPPED)
		break;

	      current_thread->last_resume_kind = resume_stop;
	      current_thread->last_status = last_status;
	    }
	  while (last_status.value.sig != GDB_SIGNAL_TRAP);
	}
      target_post_create_inferior ();
      return signal_pid;
    }

  /* Wait till we are at 1st instruction in program, return new pid
     (assuming success).  */
  last_ptid = mywait (pid_to_ptid (signal_pid), &last_status, 0, 0);

  target_post_create_inferior ();

  if (last_status.kind != TARGET_WAITKIND_EXITED
      && last_status.kind != TARGET_WAITKIND_SIGNALLED)
    {
      current_thread->last_resume_kind = resume_stop;
      current_thread->last_status = last_status;
    }
  else
    mourn_inferior (find_process_pid (ptid_get_pid (last_ptid)));

  return signal_pid;
}

static int
attach_inferior (int pid)
{
  /* myattach should return -1 if attaching is unsupported,
     0 if it succeeded, and call error() otherwise.  */

  if (myattach (pid) != 0)
    return -1;

  fprintf (stderr, "Attached; pid = %d\n", pid);
  fflush (stderr);

  /* FIXME - It may be that we should get the SIGNAL_PID from the
     attach function, so that it can be the main thread instead of
     whichever we were told to attach to.  */
  signal_pid = pid;

  if (!non_stop)
    {
      last_ptid = mywait (pid_to_ptid (pid), &last_status, 0, 0);

      /* GDB knows to ignore the first SIGSTOP after attaching to a running
	 process using the "attach" command, but this is different; it's
	 just using "target remote".  Pretend it's just starting up.  */
      if (last_status.kind == TARGET_WAITKIND_STOPPED
	  && last_status.value.sig == GDB_SIGNAL_STOP)
	last_status.value.sig = GDB_SIGNAL_TRAP;

      current_thread->last_resume_kind = resume_stop;
      current_thread->last_status = last_status;
    }

  return 0;
}

extern int remote_debug;

/* Decode a qXfer read request.  Return 0 if everything looks OK,
   or -1 otherwise.  */

static int
decode_xfer_read (char *buf, CORE_ADDR *ofs, unsigned int *len)
{
  /* After the read marker and annex, qXfer looks like a
     traditional 'm' packet.  */
  decode_m_packet (buf, ofs, len);

  return 0;
}

static int
decode_xfer (char *buf, char **object, char **rw, char **annex, char **offset)
{
  /* Extract and NUL-terminate the object.  */
  *object = buf;
  while (*buf && *buf != ':')
    buf++;
  if (*buf == '\0')
    return -1;
  *buf++ = 0;

  /* Extract and NUL-terminate the read/write action.  */
  *rw = buf;
  while (*buf && *buf != ':')
    buf++;
  if (*buf == '\0')
    return -1;
  *buf++ = 0;

  /* Extract and NUL-terminate the annex.  */
  *annex = buf;
  while (*buf && *buf != ':')
    buf++;
  if (*buf == '\0')
    return -1;
  *buf++ = 0;

  *offset = buf;
  return 0;
}

/* Write the response to a successful qXfer read.  Returns the
   length of the (binary) data stored in BUF, corresponding
   to as much of DATA/LEN as we could fit.  IS_MORE controls
   the first character of the response.  */
static int
write_qxfer_response (char *buf, const gdb_byte *data, int len, int is_more)
{
  int out_len;

  if (is_more)
    buf[0] = 'm';
  else
    buf[0] = 'l';

  return remote_escape_output (data, len, 1, (unsigned char *) buf + 1,
			       &out_len, PBUFSIZ - 2) + 1;
}

/* Handle btrace enabling in BTS format.  */

static const char *
handle_btrace_enable_bts (struct thread_info *thread)
{
  if (thread->btrace != NULL)
    return "E.Btrace already enabled.";

  current_btrace_conf.format = BTRACE_FORMAT_BTS;
  thread->btrace = target_enable_btrace (thread->entry.id,
					 &current_btrace_conf);
  if (thread->btrace == NULL)
    return "E.Could not enable btrace.";

  return NULL;
}

/* Handle btrace enabling in Intel Processor Trace format.  */

static const char *
handle_btrace_enable_pt (struct thread_info *thread)
{
  if (thread->btrace != NULL)
    return "E.Btrace already enabled.";

  current_btrace_conf.format = BTRACE_FORMAT_PT;
  thread->btrace = target_enable_btrace (thread->entry.id,
					 &current_btrace_conf);
  if (thread->btrace == NULL)
    return "E.Could not enable btrace.";

  return NULL;
}

/* Handle btrace disabling.  */

static const char *
handle_btrace_disable (struct thread_info *thread)
{

  if (thread->btrace == NULL)
    return "E.Branch tracing not enabled.";

  if (target_disable_btrace (thread->btrace) != 0)
    return "E.Could not disable branch tracing.";

  thread->btrace = NULL;
  return NULL;
}

/* Handle the "Qbtrace" packet.  */

static int
handle_btrace_general_set (char *own_buf)
{
  struct thread_info *thread;
  const char *err;
  char *op;

  if (!startswith (own_buf, "Qbtrace:"))
    return 0;

  op = own_buf + strlen ("Qbtrace:");

  if (ptid_equal (general_thread, null_ptid)
      || ptid_equal (general_thread, minus_one_ptid))
    {
      strcpy (own_buf, "E.Must select a single thread.");
      return -1;
    }

  thread = find_thread_ptid (general_thread);
  if (thread == NULL)
    {
      strcpy (own_buf, "E.No such thread.");
      return -1;
    }

  err = NULL;

  if (strcmp (op, "bts") == 0)
    err = handle_btrace_enable_bts (thread);
  else if (strcmp (op, "pt") == 0)
    err = handle_btrace_enable_pt (thread);
  else if (strcmp (op, "off") == 0)
    err = handle_btrace_disable (thread);
  else
    err = "E.Bad Qbtrace operation. Use bts, pt, or off.";

  if (err != 0)
    strcpy (own_buf, err);
  else
    write_ok (own_buf);

  return 1;
}

/* Handle the "Qbtrace-conf" packet.  */

static int
handle_btrace_conf_general_set (char *own_buf)
{
  struct thread_info *thread;
  char *op;

  if (!startswith (own_buf, "Qbtrace-conf:"))
    return 0;

  op = own_buf + strlen ("Qbtrace-conf:");

  if (ptid_equal (general_thread, null_ptid)
      || ptid_equal (general_thread, minus_one_ptid))
    {
      strcpy (own_buf, "E.Must select a single thread.");
      return -1;
    }

  thread = find_thread_ptid (general_thread);
  if (thread == NULL)
    {
      strcpy (own_buf, "E.No such thread.");
      return -1;
    }

  if (startswith (op, "bts:size="))
    {
      unsigned long size;
      char *endp = NULL;

      errno = 0;
      size = strtoul (op + strlen ("bts:size="), &endp, 16);
      if (endp == NULL || *endp != 0 || errno != 0 || size > UINT_MAX)
	{
	  strcpy (own_buf, "E.Bad size value.");
	  return -1;
	}

      current_btrace_conf.bts.size = (unsigned int) size;
    }
  else if (strncmp (op, "pt:size=", strlen ("pt:size=")) == 0)
    {
      unsigned long size;
      char *endp = NULL;

      errno = 0;
      size = strtoul (op + strlen ("pt:size="), &endp, 16);
      if (endp == NULL || *endp != 0 || errno != 0 || size > UINT_MAX)
	{
	  strcpy (own_buf, "E.Bad size value.");
	  return -1;
	}

      current_btrace_conf.pt.size = (unsigned int) size;
    }
  else
    {
      strcpy (own_buf, "E.Bad Qbtrace configuration option.");
      return -1;
    }

  write_ok (own_buf);
  return 1;
}

/* Handle all of the extended 'Q' packets.  */

static void
handle_general_set (char *own_buf)
{
  if (startswith (own_buf, "QPassSignals:"))
    {
      int numsigs = (int) GDB_SIGNAL_LAST, i;
      const char *p = own_buf + strlen ("QPassSignals:");
      CORE_ADDR cursig;

      p = decode_address_to_semicolon (&cursig, p);
      for (i = 0; i < numsigs; i++)
	{
	  if (i == cursig)
	    {
	      pass_signals[i] = 1;
	      if (*p == '\0')
		/* Keep looping, to clear the remaining signals.  */
		cursig = -1;
	      else
		p = decode_address_to_semicolon (&cursig, p);
	    }
	  else
	    pass_signals[i] = 0;
	}
      strcpy (own_buf, "OK");
      return;
    }

  if (startswith (own_buf, "QProgramSignals:"))
    {
      int numsigs = (int) GDB_SIGNAL_LAST, i;
      const char *p = own_buf + strlen ("QProgramSignals:");
      CORE_ADDR cursig;

      program_signals_p = 1;

      p = decode_address_to_semicolon (&cursig, p);
      for (i = 0; i < numsigs; i++)
	{
	  if (i == cursig)
	    {
	      program_signals[i] = 1;
	      if (*p == '\0')
		/* Keep looping, to clear the remaining signals.  */
		cursig = -1;
	      else
		p = decode_address_to_semicolon (&cursig, p);
	    }
	  else
	    program_signals[i] = 0;
	}
      strcpy (own_buf, "OK");
      return;
    }

  if (startswith (own_buf, "QCatchSyscalls:"))
    {
      const char *p = own_buf + sizeof ("QCatchSyscalls:") - 1;
      int enabled = -1;
      CORE_ADDR sysno;
      struct process_info *process;

      if (!target_running () || !target_supports_catch_syscall ())
	{
	  write_enn (own_buf);
	  return;
	}

      if (strcmp (p, "0") == 0)
	enabled = 0;
      else if (p[0] == '1' && (p[1] == ';' || p[1] == '\0'))
	enabled = 1;
      else
	{
	  fprintf (stderr, "Unknown catch-syscalls mode requested: %s\n",
		   own_buf);
	  write_enn (own_buf);
	  return;
	}

      process = current_process ();
      VEC_truncate (int, process->syscalls_to_catch, 0);

      if (enabled)
	{
	  p += 1;
	  if (*p == ';')
	    {
	      p += 1;
	      while (*p != '\0')
		{
		  p = decode_address_to_semicolon (&sysno, p);
		  VEC_safe_push (int, process->syscalls_to_catch, (int) sysno);
		}
	    }
	  else
	    VEC_safe_push (int, process->syscalls_to_catch, ANY_SYSCALL);
	}

      write_ok (own_buf);
      return;
    }

  if (strcmp (own_buf, "QStartNoAckMode") == 0)
    {
      if (remote_debug)
	{
	  fprintf (stderr, "[noack mode enabled]\n");
	  fflush (stderr);
	}

      noack_mode = 1;
      write_ok (own_buf);
      return;
    }

  if (startswith (own_buf, "QNonStop:"))
    {
      char *mode = own_buf + 9;
      int req = -1;
      const char *req_str;

      if (strcmp (mode, "0") == 0)
	req = 0;
      else if (strcmp (mode, "1") == 0)
	req = 1;
      else
	{
	  /* We don't know what this mode is, so complain to
	     GDB.  */
	  fprintf (stderr, "Unknown non-stop mode requested: %s\n",
		   own_buf);
	  write_enn (own_buf);
	  return;
	}

      req_str = req ? "non-stop" : "all-stop";
      if (start_non_stop (req) != 0)
	{
	  fprintf (stderr, "Setting %s mode failed\n", req_str);
	  write_enn (own_buf);
	  return;
	}

      non_stop = req;

      if (remote_debug)
	fprintf (stderr, "[%s mode enabled]\n", req_str);

      write_ok (own_buf);
      return;
    }

  if (startswith (own_buf, "QDisableRandomization:"))
    {
      char *packet = own_buf + strlen ("QDisableRandomization:");
      ULONGEST setting;

      unpack_varlen_hex (packet, &setting);
      disable_randomization = setting;

      if (remote_debug)
	{
	  if (disable_randomization)
	    fprintf (stderr, "[address space randomization disabled]\n");
	  else
	    fprintf (stderr, "[address space randomization enabled]\n");
	}

      write_ok (own_buf);
      return;
    }

  if (target_supports_tracepoints ()
      && handle_tracepoint_general_set (own_buf))
    return;

  if (startswith (own_buf, "QAgent:"))
    {
      char *mode = own_buf + strlen ("QAgent:");
      int req = 0;

      if (strcmp (mode, "0") == 0)
	req = 0;
      else if (strcmp (mode, "1") == 0)
	req = 1;
      else
	{
	  /* We don't know what this value is, so complain to GDB.  */
	  sprintf (own_buf, "E.Unknown QAgent value");
	  return;
	}

      /* Update the flag.  */
      use_agent = req;
      if (remote_debug)
	fprintf (stderr, "[%s agent]\n", req ? "Enable" : "Disable");
      write_ok (own_buf);
      return;
    }

  if (handle_btrace_general_set (own_buf))
    return;

  if (handle_btrace_conf_general_set (own_buf))
    return;

  if (startswith (own_buf, "QThreadEvents:"))
    {
      char *mode = own_buf + strlen ("QThreadEvents:");
      enum tribool req = TRIBOOL_UNKNOWN;

      if (strcmp (mode, "0") == 0)
	req = TRIBOOL_FALSE;
      else if (strcmp (mode, "1") == 0)
	req = TRIBOOL_TRUE;
      else
	{
	  char *mode_copy = xstrdup (mode);

	  /* We don't know what this mode is, so complain to GDB.  */
	  sprintf (own_buf, "E.Unknown thread-events mode requested: %s\n",
		   mode_copy);
	  xfree (mode_copy);
	  return;
	}

      report_thread_events = (req == TRIBOOL_TRUE);

      if (remote_debug)
	{
	  const char *req_str = report_thread_events ? "enabled" : "disabled";

	  fprintf (stderr, "[thread events are now %s]\n", req_str);
	}

      write_ok (own_buf);
      return;
    }

  /* Otherwise we didn't know what packet it was.  Say we didn't
     understand it.  */
  own_buf[0] = 0;
}

static const char *
get_features_xml (const char *annex)
{
  const struct target_desc *desc = current_target_desc ();

  /* `desc->xmltarget' defines what to return when looking for the
     "target.xml" file.  Its contents can either be verbatim XML code
     (prefixed with a '@') or else the name of the actual XML file to
     be used in place of "target.xml".

     This variable is set up from the auto-generated
     init_registers_... routine for the current target.  */

  if (desc->xmltarget != NULL && strcmp (annex, "target.xml") == 0)
    {
      if (*desc->xmltarget == '@')
	return desc->xmltarget + 1;
      else
	annex = desc->xmltarget;
    }

#ifdef USE_XML
  {
    extern const char *const xml_builtin[][2];
    int i;

    /* Look for the annex.  */
    for (i = 0; xml_builtin[i][0] != NULL; i++)
      if (strcmp (annex, xml_builtin[i][0]) == 0)
	break;

    if (xml_builtin[i][0] != NULL)
      return xml_builtin[i][1];
  }
#endif

  return NULL;
}

static void
monitor_show_help (void)
{
  monitor_output ("The following monitor commands are supported:\n");
  monitor_output ("  set debug <0|1>\n");
  monitor_output ("    Enable general debugging messages\n");
  monitor_output ("  set debug-hw-points <0|1>\n");
  monitor_output ("    Enable h/w breakpoint/watchpoint debugging messages\n");
  monitor_output ("  set remote-debug <0|1>\n");
  monitor_output ("    Enable remote protocol debugging messages\n");
  monitor_output ("  set debug-format option1[,option2,...]\n");
  monitor_output ("    Add additional information to debugging messages\n");
  monitor_output ("    Options: all, none");
  monitor_output (", timestamp");
  monitor_output ("\n");
  monitor_output ("  exit\n");
  monitor_output ("    Quit GDBserver\n");
}

/* Read trace frame or inferior memory.  Returns the number of bytes
   actually read, zero when no further transfer is possible, and -1 on
   error.  Return of a positive value smaller than LEN does not
   indicate there's no more to be read, only the end of the transfer.
   E.g., when GDB reads memory from a traceframe, a first request may
   be served from a memory block that does not cover the whole request
   length.  A following request gets the rest served from either
   another block (of the same traceframe) or from the read-only
   regions.  */

static int
gdb_read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
{
  int res;

  if (current_traceframe >= 0)
    {
      ULONGEST nbytes;
      ULONGEST length = len;

      if (traceframe_read_mem (current_traceframe,
			       memaddr, myaddr, len, &nbytes))
	return -1;
      /* Data read from trace buffer, we're done.  */
      if (nbytes > 0)
	return nbytes;
      if (!in_readonly_region (memaddr, length))
	return -1;
      /* Otherwise we have a valid readonly case, fall through.  */
      /* (assume no half-trace half-real blocks for now) */
    }

  res = prepare_to_access_memory ();
  if (res == 0)
    {
      if (set_desired_thread (1))
	res = read_inferior_memory (memaddr, myaddr, len);
      else
	res = 1;
      done_accessing_memory ();

      return res == 0 ? len : -1;
    }
  else
    return -1;
}

/* Write trace frame or inferior memory.  Actually, writing to trace
   frames is forbidden.  */

static int
gdb_write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len)
{
  if (current_traceframe >= 0)
    return EIO;
  else
    {
      int ret;

      ret = prepare_to_access_memory ();
      if (ret == 0)
	{
	  if (set_desired_thread (1))
	    ret = write_inferior_memory (memaddr, myaddr, len);
	  else
	    ret = EIO;
	  done_accessing_memory ();
	}
      return ret;
    }
}

/* Subroutine of handle_search_memory to simplify it.  */

static int
handle_search_memory_1 (CORE_ADDR start_addr, CORE_ADDR search_space_len,
			gdb_byte *pattern, unsigned pattern_len,
			gdb_byte *search_buf,
			unsigned chunk_size, unsigned search_buf_size,
			CORE_ADDR *found_addrp)
{
  /* Prime the search buffer.  */

  if (gdb_read_memory (start_addr, search_buf, search_buf_size)
      != search_buf_size)
    {
      warning ("Unable to access %ld bytes of target "
	       "memory at 0x%lx, halting search.",
	       (long) search_buf_size, (long) start_addr);
      return -1;
    }

  /* Perform the search.

     The loop is kept simple by allocating [N + pattern-length - 1] bytes.
     When we've scanned N bytes we copy the trailing bytes to the start and
     read in another N bytes.  */

  while (search_space_len >= pattern_len)
    {
      gdb_byte *found_ptr;
      unsigned nr_search_bytes = (search_space_len < search_buf_size
				  ? search_space_len
				  : search_buf_size);

      found_ptr = (gdb_byte *) memmem (search_buf, nr_search_bytes, pattern,
				       pattern_len);

      if (found_ptr != NULL)
	{
	  CORE_ADDR found_addr = start_addr + (found_ptr - search_buf);
	  *found_addrp = found_addr;
	  return 1;
	}

      /* Not found in this chunk, skip to next chunk.  */

      /* Don't let search_space_len wrap here, it's unsigned.  */
      if (search_space_len >= chunk_size)
	search_space_len -= chunk_size;
      else
	search_space_len = 0;

      if (search_space_len >= pattern_len)
	{
	  unsigned keep_len = search_buf_size - chunk_size;
	  CORE_ADDR read_addr = start_addr + chunk_size + keep_len;
	  int nr_to_read;

	  /* Copy the trailing part of the previous iteration to the front
	     of the buffer for the next iteration.  */
	  memcpy (search_buf, search_buf + chunk_size, keep_len);

	  nr_to_read = (search_space_len - keep_len < chunk_size
			? search_space_len - keep_len
			: chunk_size);

	  if (gdb_read_memory (read_addr, search_buf + keep_len,
			       nr_to_read) != search_buf_size)
	    {
	      warning ("Unable to access %ld bytes of target memory "
		       "at 0x%lx, halting search.",
		       (long) nr_to_read, (long) read_addr);
	      return -1;
	    }

	  start_addr += chunk_size;
	}
    }

  /* Not found.  */

  return 0;
}

/* Handle qSearch:memory packets.  */

static void
handle_search_memory (char *own_buf, int packet_len)
{
  CORE_ADDR start_addr;
  CORE_ADDR search_space_len;
  gdb_byte *pattern;
  unsigned int pattern_len;
  /* NOTE: also defined in find.c testcase.  */
#define SEARCH_CHUNK_SIZE 16000
  const unsigned chunk_size = SEARCH_CHUNK_SIZE;
  /* Buffer to hold memory contents for searching.  */
  gdb_byte *search_buf;
  unsigned search_buf_size;
  int found;
  CORE_ADDR found_addr;
  int cmd_name_len = sizeof ("qSearch:memory:") - 1;

  pattern = (gdb_byte *) malloc (packet_len);
  if (pattern == NULL)
    {
      error ("Unable to allocate memory to perform the search");
      strcpy (own_buf, "E00");
      return;
    }
  if (decode_search_memory_packet (own_buf + cmd_name_len,
				   packet_len - cmd_name_len,
				   &start_addr, &search_space_len,
				   pattern, &pattern_len) < 0)
    {
      free (pattern);
      error ("Error in parsing qSearch:memory packet");
      strcpy (own_buf, "E00");
      return;
    }

  search_buf_size = chunk_size + pattern_len - 1;

  /* No point in trying to allocate a buffer larger than the search space.  */
  if (search_space_len < search_buf_size)
    search_buf_size = search_space_len;

  search_buf = (gdb_byte *) malloc (search_buf_size);
  if (search_buf == NULL)
    {
      free (pattern);
      error ("Unable to allocate memory to perform the search");
      strcpy (own_buf, "E00");
      return;
    }

  found = handle_search_memory_1 (start_addr, search_space_len,
				  pattern, pattern_len,
				  search_buf, chunk_size, search_buf_size,
				  &found_addr);

  if (found > 0)
    sprintf (own_buf, "1,%lx", (long) found_addr);
  else if (found == 0)
    strcpy (own_buf, "0");
  else
    strcpy (own_buf, "E00");

  free (search_buf);
  free (pattern);
}

#define require_running(BUF)			\
  if (!target_running ())			\
    {						\
      write_enn (BUF);				\
      return;					\
    }

/* Parse options to --debug-format= and "monitor set debug-format".
   ARG is the text after "--debug-format=" or "monitor set debug-format".
   IS_MONITOR is non-zero if we're invoked via "monitor set debug-format".
   This triggers calls to monitor_output.
   The result is NULL if all options were parsed ok, otherwise an error
   message which the caller must free.

   N.B. These commands affect all debug format settings, they are not
   cumulative.  If a format is not specified, it is turned off.
   However, we don't go to extra trouble with things like
   "monitor set debug-format all,none,timestamp".
   Instead we just parse them one at a time, in order.

   The syntax for "monitor set debug" we support here is not identical
   to gdb's "set debug foo on|off" because we also use this function to
   parse "--debug-format=foo,bar".  */

static char *
parse_debug_format_options (const char *arg, int is_monitor)
{
  VEC (char_ptr) *options;
  int ix;
  char *option;

  /* First turn all debug format options off.  */
  debug_timestamp = 0;

  /* First remove leading spaces, for "monitor set debug-format".  */
  while (isspace (*arg))
    ++arg;

  options = delim_string_to_char_ptr_vec (arg, ',');

  for (ix = 0; VEC_iterate (char_ptr, options, ix, option); ++ix)
    {
      if (strcmp (option, "all") == 0)
	{
	  debug_timestamp = 1;
	  if (is_monitor)
	    monitor_output ("All extra debug format options enabled.\n");
	}
      else if (strcmp (option, "none") == 0)
	{
	  debug_timestamp = 0;
	  if (is_monitor)
	    monitor_output ("All extra debug format options disabled.\n");
	}
      else if (strcmp (option, "timestamp") == 0)
	{
	  debug_timestamp = 1;
	  if (is_monitor)
	    monitor_output ("Timestamps will be added to debug output.\n");
	}
      else if (*option == '\0')
	{
	  /* An empty option, e.g., "--debug-format=foo,,bar", is ignored.  */
	  continue;
	}
      else
	{
	  char *msg = xstrprintf ("Unknown debug-format argument: \"%s\"\n",
				  option);

	  free_char_ptr_vec (options);
	  return msg;
	}
    }

  free_char_ptr_vec (options);
  return NULL;
}

/* Handle monitor commands not handled by target-specific handlers.  */

static void
handle_monitor_command (char *mon, char *own_buf)
{
  if (strcmp (mon, "set debug 1") == 0)
    {
      debug_threads = 1;
      monitor_output ("Debug output enabled.\n");
    }
  else if (strcmp (mon, "set debug 0") == 0)
    {
      debug_threads = 0;
      monitor_output ("Debug output disabled.\n");
    }
  else if (strcmp (mon, "set debug-hw-points 1") == 0)
    {
      show_debug_regs = 1;
      monitor_output ("H/W point debugging output enabled.\n");
    }
  else if (strcmp (mon, "set debug-hw-points 0") == 0)
    {
      show_debug_regs = 0;
      monitor_output ("H/W point debugging output disabled.\n");
    }
  else if (strcmp (mon, "set remote-debug 1") == 0)
    {
      remote_debug = 1;
      monitor_output ("Protocol debug output enabled.\n");
    }
  else if (strcmp (mon, "set remote-debug 0") == 0)
    {
      remote_debug = 0;
      monitor_output ("Protocol debug output disabled.\n");
    }
  else if (startswith (mon, "set debug-format "))
    {
      char *error_msg
	= parse_debug_format_options (mon + sizeof ("set debug-format ") - 1,
				      1);

      if (error_msg != NULL)
	{
	  monitor_output (error_msg);
	  monitor_show_help ();
	  write_enn (own_buf);
	  xfree (error_msg);
	}
    }
  else if (strcmp (mon, "help") == 0)
    monitor_show_help ();
  else if (strcmp (mon, "exit") == 0)
    exit_requested = 1;
  else
    {
      monitor_output ("Unknown monitor command.\n\n");
      monitor_show_help ();
      write_enn (own_buf);
    }
}

/* Associates a callback with each supported qXfer'able object.  */

struct qxfer
{
  /* The object this handler handles.  */
  const char *object;

  /* Request that the target transfer up to LEN 8-bit bytes of the
     target's OBJECT.  The OFFSET, for a seekable object, specifies
     the starting point.  The ANNEX can be used to provide additional
     data-specific information to the target.

     Return the number of bytes actually transfered, zero when no
     further transfer is possible, -1 on error, -2 when the transfer
     is not supported, and -3 on a verbose error message that should
     be preserved.  Return of a positive value smaller than LEN does
     not indicate the end of the object, only the end of the transfer.

     One, and only one, of readbuf or writebuf must be non-NULL.  */
  int (*xfer) (const char *annex,
	       gdb_byte *readbuf, const gdb_byte *writebuf,
	       ULONGEST offset, LONGEST len);
};

/* Handle qXfer:auxv:read.  */

static int
handle_qxfer_auxv (const char *annex,
		   gdb_byte *readbuf, const gdb_byte *writebuf,
		   ULONGEST offset, LONGEST len)
{
  if (the_target->read_auxv == NULL || writebuf != NULL)
    return -2;

  if (annex[0] != '\0' || current_thread == NULL)
    return -1;

  return (*the_target->read_auxv) (offset, readbuf, len);
}

/* Handle qXfer:exec-file:read.  */

static int
handle_qxfer_exec_file (const char *const_annex,
			gdb_byte *readbuf, const gdb_byte *writebuf,
			ULONGEST offset, LONGEST len)
{
  char *file;
  ULONGEST pid;
  int total_len;

  if (the_target->pid_to_exec_file == NULL || writebuf != NULL)
    return -2;

  if (const_annex[0] == '\0')
    {
      if (current_thread == NULL)
	return -1;

      pid = pid_of (current_thread);
    }
  else
    {
      char *annex = (char *) alloca (strlen (const_annex) + 1);

      strcpy (annex, const_annex);
      annex = unpack_varlen_hex (annex, &pid);

      if (annex[0] != '\0')
	return -1;
    }

  if (pid <= 0)
    return -1;

  file = (*the_target->pid_to_exec_file) (pid);
  if (file == NULL)
    return -1;

  total_len = strlen (file);

  if (offset > total_len)
    return -1;

  if (offset + len > total_len)
    len = total_len - offset;

  memcpy (readbuf, file + offset, len);
  return len;
}

/* Handle qXfer:features:read.  */

static int
handle_qxfer_features (const char *annex,
		       gdb_byte *readbuf, const gdb_byte *writebuf,
		       ULONGEST offset, LONGEST len)
{
  const char *document;
  size_t total_len;

  if (writebuf != NULL)
    return -2;

  if (!target_running ())
    return -1;

  /* Grab the correct annex.  */
  document = get_features_xml (annex);
  if (document == NULL)
    return -1;

  total_len = strlen (document);

  if (offset > total_len)
    return -1;

  if (offset + len > total_len)
    len = total_len - offset;

  memcpy (readbuf, document + offset, len);
  return len;
}

/* Worker routine for handle_qxfer_libraries.
   Add to the length pointed to by ARG a conservative estimate of the
   length needed to transmit the file name of INF.  */

static void
accumulate_file_name_length (struct inferior_list_entry *inf, void *arg)
{
  struct dll_info *dll = (struct dll_info *) inf;
  unsigned int *total_len = (unsigned int *) arg;

  /* Over-estimate the necessary memory.  Assume that every character
     in the library name must be escaped.  */
  *total_len += 128 + 6 * strlen (dll->name);
}

/* Worker routine for handle_qxfer_libraries.
   Emit the XML to describe the library in INF.  */

static void
emit_dll_description (struct inferior_list_entry *inf, void *arg)
{
  struct dll_info *dll = (struct dll_info *) inf;
  char **p_ptr = (char **) arg;
  char *p = *p_ptr;
  char *name;

  strcpy (p, "  <library name=\"");
  p = p + strlen (p);
  name = xml_escape_text (dll->name);
  strcpy (p, name);
  free (name);
  p = p + strlen (p);
  strcpy (p, "\"><segment address=\"");
  p = p + strlen (p);
  sprintf (p, "0x%lx", (long) dll->base_addr);
  p = p + strlen (p);
  strcpy (p, "\"/></library>\n");
  p = p + strlen (p);

  *p_ptr = p;
}

/* Handle qXfer:libraries:read.  */

static int
handle_qxfer_libraries (const char *annex,
			gdb_byte *readbuf, const gdb_byte *writebuf,
			ULONGEST offset, LONGEST len)
{
  unsigned int total_len;
  char *document, *p;

  if (writebuf != NULL)
    return -2;

  if (annex[0] != '\0' || current_thread == NULL)
    return -1;

  total_len = 64;
  for_each_inferior_with_data (&all_dlls, accumulate_file_name_length,
			       &total_len);

  document = (char *) malloc (total_len);
  if (document == NULL)
    return -1;

  strcpy (document, "<library-list version=\"1.0\">\n");
  p = document + strlen (document);

  for_each_inferior_with_data (&all_dlls, emit_dll_description, &p);

  strcpy (p, "</library-list>\n");

  total_len = strlen (document);

  if (offset > total_len)
    {
      free (document);
      return -1;
    }

  if (offset + len > total_len)
    len = total_len - offset;

  memcpy (readbuf, document + offset, len);
  free (document);
  return len;
}

/* Handle qXfer:libraries-svr4:read.  */

static int
handle_qxfer_libraries_svr4 (const char *annex,
			     gdb_byte *readbuf, const gdb_byte *writebuf,
			     ULONGEST offset, LONGEST len)
{
  if (writebuf != NULL)
    return -2;

  if (current_thread == NULL || the_target->qxfer_libraries_svr4 == NULL)
    return -1;

  return the_target->qxfer_libraries_svr4 (annex, readbuf, writebuf, offset, len);
}

/* Handle qXfer:osadata:read.  */

static int
handle_qxfer_osdata (const char *annex,
		     gdb_byte *readbuf, const gdb_byte *writebuf,
		     ULONGEST offset, LONGEST len)
{
  if (the_target->qxfer_osdata == NULL || writebuf != NULL)
    return -2;

  return (*the_target->qxfer_osdata) (annex, readbuf, NULL, offset, len);
}

/* Handle qXfer:siginfo:read and qXfer:siginfo:write.  */

static int
handle_qxfer_siginfo (const char *annex,
		      gdb_byte *readbuf, const gdb_byte *writebuf,
		      ULONGEST offset, LONGEST len)
{
  if (the_target->qxfer_siginfo == NULL)
    return -2;

  if (annex[0] != '\0' || current_thread == NULL)
    return -1;

  return (*the_target->qxfer_siginfo) (annex, readbuf, writebuf, offset, len);
}

/* Handle qXfer:spu:read and qXfer:spu:write.  */

static int
handle_qxfer_spu (const char *annex,
		  gdb_byte *readbuf, const gdb_byte *writebuf,
		  ULONGEST offset, LONGEST len)
{
  if (the_target->qxfer_spu == NULL)
    return -2;

  if (current_thread == NULL)
    return -1;

  return (*the_target->qxfer_spu) (annex, readbuf, writebuf, offset, len);
}

/* Handle qXfer:statictrace:read.  */

static int
handle_qxfer_statictrace (const char *annex,
			  gdb_byte *readbuf, const gdb_byte *writebuf,
			  ULONGEST offset, LONGEST len)
{
  ULONGEST nbytes;

  if (writebuf != NULL)
    return -2;

  if (annex[0] != '\0' || current_thread == NULL || current_traceframe == -1)
    return -1;

  if (traceframe_read_sdata (current_traceframe, offset,
			     readbuf, len, &nbytes))
    return -1;
  return nbytes;
}

/* Helper for handle_qxfer_threads_proper.
   Emit the XML to describe the thread of INF.  */

static void
handle_qxfer_threads_worker (struct inferior_list_entry *inf, void *arg)
{
  struct thread_info *thread = (struct thread_info *) inf;
  struct buffer *buffer = (struct buffer *) arg;
  ptid_t ptid = thread_to_gdb_id (thread);
  char ptid_s[100];
  int core = target_core_of_thread (ptid);
  char core_s[21];
  const char *name = target_thread_name (ptid);

  write_ptid (ptid_s, ptid);

  buffer_xml_printf (buffer, "<thread id=\"%s\"", ptid_s);

  if (core != -1)
    {
      sprintf (core_s, "%d", core);
      buffer_xml_printf (buffer, " core=\"%s\"", core_s);
    }

  if (name != NULL)
    buffer_xml_printf (buffer, " name=\"%s\"", name);

  buffer_xml_printf (buffer, "/>\n");
}

/* Helper for handle_qxfer_threads.  */

static void
handle_qxfer_threads_proper (struct buffer *buffer)
{
  buffer_grow_str (buffer, "<threads>\n");

  for_each_inferior_with_data (&all_threads, handle_qxfer_threads_worker,
			       buffer);

  buffer_grow_str0 (buffer, "</threads>\n");
}

/* Handle qXfer:threads:read.  */

static int
handle_qxfer_threads (const char *annex,
		      gdb_byte *readbuf, const gdb_byte *writebuf,
		      ULONGEST offset, LONGEST len)
{
  static char *result = 0;
  static unsigned int result_length = 0;

  if (writebuf != NULL)
    return -2;

  if (annex[0] != '\0')
    return -1;

  if (offset == 0)
    {
      struct buffer buffer;
      /* When asked for data at offset 0, generate everything and store into
	 'result'.  Successive reads will be served off 'result'.  */
      if (result)
	free (result);

      buffer_init (&buffer);

      handle_qxfer_threads_proper (&buffer);

      result = buffer_finish (&buffer);
      result_length = strlen (result);
      buffer_free (&buffer);
    }

  if (offset >= result_length)
    {
      /* We're out of data.  */
      free (result);
      result = NULL;
      result_length = 0;
      return 0;
    }

  if (len > result_length - offset)
    len = result_length - offset;

  memcpy (readbuf, result + offset, len);

  return len;
}

/* Handle qXfer:traceframe-info:read.  */

static int
handle_qxfer_traceframe_info (const char *annex,
			      gdb_byte *readbuf, const gdb_byte *writebuf,
			      ULONGEST offset, LONGEST len)
{
  static char *result = 0;
  static unsigned int result_length = 0;

  if (writebuf != NULL)
    return -2;

  if (!target_running () || annex[0] != '\0' || current_traceframe == -1)
    return -1;

  if (offset == 0)
    {
      struct buffer buffer;

      /* When asked for data at offset 0, generate everything and
	 store into 'result'.  Successive reads will be served off
	 'result'.  */
      free (result);

      buffer_init (&buffer);

      traceframe_read_info (current_traceframe, &buffer);

      result = buffer_finish (&buffer);
      result_length = strlen (result);
      buffer_free (&buffer);
    }

  if (offset >= result_length)
    {
      /* We're out of data.  */
      free (result);
      result = NULL;
      result_length = 0;
      return 0;
    }

  if (len > result_length - offset)
    len = result_length - offset;

  memcpy (readbuf, result + offset, len);
  return len;
}

/* Handle qXfer:fdpic:read.  */

static int
handle_qxfer_fdpic (const char *annex, gdb_byte *readbuf,
		    const gdb_byte *writebuf, ULONGEST offset, LONGEST len)
{
  if (the_target->read_loadmap == NULL)
    return -2;

  if (current_thread == NULL)
    return -1;

  return (*the_target->read_loadmap) (annex, offset, readbuf, len);
}

/* Handle qXfer:btrace:read.  */

static int
handle_qxfer_btrace (const char *annex,
		     gdb_byte *readbuf, const gdb_byte *writebuf,
		     ULONGEST offset, LONGEST len)
{
  static struct buffer cache;
  struct thread_info *thread;
  enum btrace_read_type type;
  int result;

  if (the_target->read_btrace == NULL || writebuf != NULL)
    return -2;

  if (ptid_equal (general_thread, null_ptid)
      || ptid_equal (general_thread, minus_one_ptid))
    {
      strcpy (own_buf, "E.Must select a single thread.");
      return -3;
    }

  thread = find_thread_ptid (general_thread);
  if (thread == NULL)
    {
      strcpy (own_buf, "E.No such thread.");
      return -3;
    }

  if (thread->btrace == NULL)
    {
      strcpy (own_buf, "E.Btrace not enabled.");
      return -3;
    }

  if (strcmp (annex, "all") == 0)
    type = BTRACE_READ_ALL;
  else if (strcmp (annex, "new") == 0)
    type = BTRACE_READ_NEW;
  else if (strcmp (annex, "delta") == 0)
    type = BTRACE_READ_DELTA;
  else
    {
      strcpy (own_buf, "E.Bad annex.");
      return -3;
    }

  if (offset == 0)
    {
      buffer_free (&cache);

      result = target_read_btrace (thread->btrace, &cache, type);
      if (result != 0)
	{
	  memcpy (own_buf, cache.buffer, cache.used_size);
	  return -3;
	}
    }
  else if (offset > cache.used_size)
    {
      buffer_free (&cache);
      return -3;
    }

  if (len > cache.used_size - offset)
    len = cache.used_size - offset;

  memcpy (readbuf, cache.buffer + offset, len);

  return len;
}

/* Handle qXfer:btrace-conf:read.  */

static int
handle_qxfer_btrace_conf (const char *annex,
			  gdb_byte *readbuf, const gdb_byte *writebuf,
			  ULONGEST offset, LONGEST len)
{
  static struct buffer cache;
  struct thread_info *thread;
  int result;

  if (the_target->read_btrace_conf == NULL || writebuf != NULL)
    return -2;

  if (annex[0] != '\0')
    return -1;

  if (ptid_equal (general_thread, null_ptid)
      || ptid_equal (general_thread, minus_one_ptid))
    {
      strcpy (own_buf, "E.Must select a single thread.");
      return -3;
    }

  thread = find_thread_ptid (general_thread);
  if (thread == NULL)
    {
      strcpy (own_buf, "E.No such thread.");
      return -3;
    }

  if (thread->btrace == NULL)
    {
      strcpy (own_buf, "E.Btrace not enabled.");
      return -3;
    }

  if (offset == 0)
    {
      buffer_free (&cache);

      result = target_read_btrace_conf (thread->btrace, &cache);
      if (result != 0)
	{
	  memcpy (own_buf, cache.buffer, cache.used_size);
	  return -3;
	}
    }
  else if (offset > cache.used_size)
    {
      buffer_free (&cache);
      return -3;
    }

  if (len > cache.used_size - offset)
    len = cache.used_size - offset;

  memcpy (readbuf, cache.buffer + offset, len);

  return len;
}

static const struct qxfer qxfer_packets[] =
  {
    { "auxv", handle_qxfer_auxv },
    { "btrace", handle_qxfer_btrace },
    { "btrace-conf", handle_qxfer_btrace_conf },
    { "exec-file", handle_qxfer_exec_file},
    { "fdpic", handle_qxfer_fdpic},
    { "features", handle_qxfer_features },
    { "libraries", handle_qxfer_libraries },
    { "libraries-svr4", handle_qxfer_libraries_svr4 },
    { "osdata", handle_qxfer_osdata },
    { "siginfo", handle_qxfer_siginfo },
    { "spu", handle_qxfer_spu },
    { "statictrace", handle_qxfer_statictrace },
    { "threads", handle_qxfer_threads },
    { "traceframe-info", handle_qxfer_traceframe_info },
  };

static int
handle_qxfer (char *own_buf, int packet_len, int *new_packet_len_p)
{
  int i;
  char *object;
  char *rw;
  char *annex;
  char *offset;

  if (!startswith (own_buf, "qXfer:"))
    return 0;

  /* Grab the object, r/w and annex.  */
  if (decode_xfer (own_buf + 6, &object, &rw, &annex, &offset) < 0)
    {
      write_enn (own_buf);
      return 1;
    }

  for (i = 0;
       i < sizeof (qxfer_packets) / sizeof (qxfer_packets[0]);
       i++)
    {
      const struct qxfer *q = &qxfer_packets[i];

      if (strcmp (object, q->object) == 0)
	{
	  if (strcmp (rw, "read") == 0)
	    {
	      unsigned char *data;
	      int n;
	      CORE_ADDR ofs;
	      unsigned int len;

	      /* Grab the offset and length.  */
	      if (decode_xfer_read (offset, &ofs, &len) < 0)
		{
		  write_enn (own_buf);
		  return 1;
		}

	      /* Read one extra byte, as an indicator of whether there is
		 more.  */
	      if (len > PBUFSIZ - 2)
		len = PBUFSIZ - 2;
	      data = (unsigned char *) malloc (len + 1);
	      if (data == NULL)
		{
		  write_enn (own_buf);
		  return 1;
		}
	      n = (*q->xfer) (annex, data, NULL, ofs, len + 1);
	      if (n == -2)
		{
		  free (data);
		  return 0;
		}
	      else if (n == -3)
		{
		  /* Preserve error message.  */
		}
	      else if (n < 0)
		write_enn (own_buf);
	      else if (n > len)
		*new_packet_len_p = write_qxfer_response (own_buf, data, len, 1);
	      else
		*new_packet_len_p = write_qxfer_response (own_buf, data, n, 0);

	      free (data);
	      return 1;
	    }
	  else if (strcmp (rw, "write") == 0)
	    {
	      int n;
	      unsigned int len;
	      CORE_ADDR ofs;
	      unsigned char *data;

	      strcpy (own_buf, "E00");
	      data = (unsigned char *) malloc (packet_len - (offset - own_buf));
	      if (data == NULL)
		{
		  write_enn (own_buf);
		  return 1;
		}
	      if (decode_xfer_write (offset, packet_len - (offset - own_buf),
				     &ofs, &len, data) < 0)
		{
		  free (data);
		  write_enn (own_buf);
		  return 1;
		}

	      n = (*q->xfer) (annex, NULL, data, ofs, len);
	      if (n == -2)
		{
		  free (data);
		  return 0;
		}
	      else if (n == -3)
		{
		  /* Preserve error message.  */
		}
	      else if (n < 0)
		write_enn (own_buf);
	      else
		sprintf (own_buf, "%x", n);

	      free (data);
	      return 1;
	    }

	  return 0;
	}
    }

  return 0;
}

/* Compute 32 bit CRC from inferior memory.

   On success, return 32 bit CRC.
   On failure, return (unsigned long long) -1.  */

static unsigned long long
crc32 (CORE_ADDR base, int len, unsigned int crc)
{
  while (len--)
    {
      unsigned char byte = 0;

      /* Return failure if memory read fails.  */
      if (read_inferior_memory (base, &byte, 1) != 0)
	return (unsigned long long) -1;

      crc = xcrc32 (&byte, 1, crc);
      base++;
    }
  return (unsigned long long) crc;
}

/* Add supported btrace packets to BUF.  */

static void
supported_btrace_packets (char *buf)
{
  int btrace_supported = 0;

  if (target_supports_btrace (BTRACE_FORMAT_BTS))
    {
      strcat (buf, ";Qbtrace:bts+");
      strcat (buf, ";Qbtrace-conf:bts:size+");

      btrace_supported = 1;
    }

  if (target_supports_btrace (BTRACE_FORMAT_PT))
    {
      strcat (buf, ";Qbtrace:pt+");
      strcat (buf, ";Qbtrace-conf:pt:size+");

      btrace_supported = 1;
    }

  if (!btrace_supported)
    return;

  strcat (buf, ";Qbtrace:off+");
  strcat (buf, ";qXfer:btrace:read+");
  strcat (buf, ";qXfer:btrace-conf:read+");
}

/* Handle all of the extended 'q' packets.  */

static void
handle_query (char *own_buf, int packet_len, int *new_packet_len_p)
{
  static struct inferior_list_entry *thread_ptr;

  /* Reply the current thread id.  */
  if (strcmp ("qC", own_buf) == 0 && !disable_packet_qC)
    {
      ptid_t gdb_id;
      require_running (own_buf);

      if (!ptid_equal (general_thread, null_ptid)
	  && !ptid_equal (general_thread, minus_one_ptid))
	gdb_id = general_thread;
      else
	{
	  thread_ptr = get_first_inferior (&all_threads);
	  gdb_id = thread_to_gdb_id ((struct thread_info *)thread_ptr);
	}

      sprintf (own_buf, "QC");
      own_buf += 2;
      write_ptid (own_buf, gdb_id);
      return;
    }

  if (strcmp ("qSymbol::", own_buf) == 0)
    {
      struct thread_info *save_thread = current_thread;

      /* For qSymbol, GDB only changes the current thread if the
	 previous current thread was of a different process.  So if
	 the previous thread is gone, we need to pick another one of
	 the same process.  This can happen e.g., if we followed an
	 exec in a non-leader thread.  */
      if (current_thread == NULL)
	{
	  current_thread
	    = find_any_thread_of_pid (ptid_get_pid (general_thread));

	  /* Just in case, if we didn't find a thread, then bail out
	     instead of crashing.  */
	  if (current_thread == NULL)
	    {
	      write_enn (own_buf);
	      current_thread = save_thread;
	      return;
	    }
	}

      /* GDB is suggesting new symbols have been loaded.  This may
	 mean a new shared library has been detected as loaded, so
	 take the opportunity to check if breakpoints we think are
	 inserted, still are.  Note that it isn't guaranteed that
	 we'll see this when a shared library is loaded, and nor will
	 we see this for unloads (although breakpoints in unloaded
	 libraries shouldn't trigger), as GDB may not find symbols for
	 the library at all.  We also re-validate breakpoints when we
	 see a second GDB breakpoint for the same address, and or when
	 we access breakpoint shadows.  */
      validate_breakpoints ();

      if (target_supports_tracepoints ())
	tracepoint_look_up_symbols ();

      if (current_thread != NULL && the_target->look_up_symbols != NULL)
	(*the_target->look_up_symbols) ();

      current_thread = save_thread;

      strcpy (own_buf, "OK");
      return;
    }

  if (!disable_packet_qfThreadInfo)
    {
      if (strcmp ("qfThreadInfo", own_buf) == 0)
	{
	  ptid_t gdb_id;

	  require_running (own_buf);
	  thread_ptr = get_first_inferior (&all_threads);

	  *own_buf++ = 'm';
	  gdb_id = thread_to_gdb_id ((struct thread_info *)thread_ptr);
	  write_ptid (own_buf, gdb_id);
	  thread_ptr = thread_ptr->next;
	  return;
	}

      if (strcmp ("qsThreadInfo", own_buf) == 0)
	{
	  ptid_t gdb_id;

	  require_running (own_buf);
	  if (thread_ptr != NULL)
	    {
	      *own_buf++ = 'm';
	      gdb_id = thread_to_gdb_id ((struct thread_info *)thread_ptr);
	      write_ptid (own_buf, gdb_id);
	      thread_ptr = thread_ptr->next;
	      return;
	    }
	  else
	    {
	      sprintf (own_buf, "l");
	      return;
	    }
	}
    }

  if (the_target->read_offsets != NULL
      && strcmp ("qOffsets", own_buf) == 0)
    {
      CORE_ADDR text, data;

      require_running (own_buf);
      if (the_target->read_offsets (&text, &data))
	sprintf (own_buf, "Text=%lX;Data=%lX;Bss=%lX",
		 (long)text, (long)data, (long)data);
      else
	write_enn (own_buf);

      return;
    }

  /* Protocol features query.  */
  if (startswith (own_buf, "qSupported")
      && (own_buf[10] == ':' || own_buf[10] == '\0'))
    {
      char *p = &own_buf[10];
      int gdb_supports_qRelocInsn = 0;

      /* Process each feature being provided by GDB.  The first
	 feature will follow a ':', and latter features will follow
	 ';'.  */
      if (*p == ':')
	{
	  char **qsupported = NULL;
	  int count = 0;
	  int unknown = 0;
	  int i;

	  /* Two passes, to avoid nested strtok calls in
	     target_process_qsupported.  */
	  for (p = strtok (p + 1, ";");
	       p != NULL;
	       p = strtok (NULL, ";"))
	    {
	      count++;
	      qsupported = XRESIZEVEC (char *, qsupported, count);
	      qsupported[count - 1] = xstrdup (p);
	    }

	  for (i = 0; i < count; i++)
	    {
	      p = qsupported[i];
	      if (strcmp (p, "multiprocess+") == 0)
		{
		  /* GDB supports and wants multi-process support if
		     possible.  */
		  if (target_supports_multi_process ())
		    multi_process = 1;
		}
	      else if (strcmp (p, "qRelocInsn+") == 0)
		{
		  /* GDB supports relocate instruction requests.  */
		  gdb_supports_qRelocInsn = 1;
		}
	      else if (strcmp (p, "swbreak+") == 0)
		{
		  /* GDB wants us to report whether a trap is caused
		     by a software breakpoint and for us to handle PC
		     adjustment if necessary on this target.  */
		  if (target_supports_stopped_by_sw_breakpoint ())
		    swbreak_feature = 1;
		}
	      else if (strcmp (p, "hwbreak+") == 0)
		{
		  /* GDB wants us to report whether a trap is caused
		     by a hardware breakpoint.  */
		  if (target_supports_stopped_by_hw_breakpoint ())
		    hwbreak_feature = 1;
		}
	      else if (strcmp (p, "fork-events+") == 0)
		{
		  /* GDB supports and wants fork events if possible.  */
		  if (target_supports_fork_events ())
		    report_fork_events = 1;
		}
	      else if (strcmp (p, "vfork-events+") == 0)
		{
		  /* GDB supports and wants vfork events if possible.  */
		  if (target_supports_vfork_events ())
		    report_vfork_events = 1;
		}
	      else if (strcmp (p, "exec-events+") == 0)
		{
		  /* GDB supports and wants exec events if possible.  */
		  if (target_supports_exec_events ())
		    report_exec_events = 1;
		}
	      else if (strcmp (p, "vContSupported+") == 0)
		vCont_supported = 1;
	      else if (strcmp (p, "QThreadEvents+") == 0)
		;
	      else if (strcmp (p, "no-resumed+") == 0)
		{
		  /* GDB supports and wants TARGET_WAITKIND_NO_RESUMED
		     events.  */
		  report_no_resumed = 1;
		}
	      else
		{
		  /* Move the unknown features all together.  */
		  qsupported[i] = NULL;
		  qsupported[unknown] = p;
		  unknown++;
		}
	    }

	  /* Give the target backend a chance to process the unknown
	     features.  */
	  target_process_qsupported (qsupported, unknown);

	  for (i = 0; i < count; i++)
	    free (qsupported[i]);
	  free (qsupported);
	}

      sprintf (own_buf,
	       "PacketSize=%x;QPassSignals+;QProgramSignals+",
	       PBUFSIZ - 1);

      if (target_supports_catch_syscall ())
	strcat (own_buf, ";QCatchSyscalls+");

      if (the_target->qxfer_libraries_svr4 != NULL)
	strcat (own_buf, ";qXfer:libraries-svr4:read+"
		";augmented-libraries-svr4-read+");
      else
	{
	  /* We do not have any hook to indicate whether the non-SVR4 target
	     backend supports qXfer:libraries:read, so always report it.  */
	  strcat (own_buf, ";qXfer:libraries:read+");
	}

      if (the_target->read_auxv != NULL)
	strcat (own_buf, ";qXfer:auxv:read+");

      if (the_target->qxfer_spu != NULL)
	strcat (own_buf, ";qXfer:spu:read+;qXfer:spu:write+");

      if (the_target->qxfer_siginfo != NULL)
	strcat (own_buf, ";qXfer:siginfo:read+;qXfer:siginfo:write+");

      if (the_target->read_loadmap != NULL)
	strcat (own_buf, ";qXfer:fdpic:read+");

      /* We always report qXfer:features:read, as targets may
	 install XML files on a subsequent call to arch_setup.
	 If we reported to GDB on startup that we don't support
	 qXfer:feature:read at all, we will never be re-queried.  */
      strcat (own_buf, ";qXfer:features:read+");

      if (transport_is_reliable)
	strcat (own_buf, ";QStartNoAckMode+");

      if (the_target->qxfer_osdata != NULL)
	strcat (own_buf, ";qXfer:osdata:read+");

      if (target_supports_multi_process ())
	strcat (own_buf, ";multiprocess+");

      if (target_supports_fork_events ())
	strcat (own_buf, ";fork-events+");

      if (target_supports_vfork_events ())
	strcat (own_buf, ";vfork-events+");

      if (target_supports_exec_events ())
	strcat (own_buf, ";exec-events+");

      if (target_supports_non_stop ())
	strcat (own_buf, ";QNonStop+");

      if (target_supports_disable_randomization ())
	strcat (own_buf, ";QDisableRandomization+");

      strcat (own_buf, ";qXfer:threads:read+");

      if (target_supports_tracepoints ())
	{
	  strcat (own_buf, ";ConditionalTracepoints+");
	  strcat (own_buf, ";TraceStateVariables+");
	  strcat (own_buf, ";TracepointSource+");
	  strcat (own_buf, ";DisconnectedTracing+");
	  if (gdb_supports_qRelocInsn && target_supports_fast_tracepoints ())
	    strcat (own_buf, ";FastTracepoints+");
	  strcat (own_buf, ";StaticTracepoints+");
	  strcat (own_buf, ";InstallInTrace+");
	  strcat (own_buf, ";qXfer:statictrace:read+");
	  strcat (own_buf, ";qXfer:traceframe-info:read+");
	  strcat (own_buf, ";EnableDisableTracepoints+");
	  strcat (own_buf, ";QTBuffer:size+");
	  strcat (own_buf, ";tracenz+");
	}

      if (target_supports_hardware_single_step ()
	  || target_supports_software_single_step () )
	{
	  strcat (own_buf, ";ConditionalBreakpoints+");
	}
      strcat (own_buf, ";BreakpointCommands+");

      if (target_supports_agent ())
	strcat (own_buf, ";QAgent+");

      supported_btrace_packets (own_buf);

      if (target_supports_stopped_by_sw_breakpoint ())
	strcat (own_buf, ";swbreak+");

      if (target_supports_stopped_by_hw_breakpoint ())
	strcat (own_buf, ";hwbreak+");

      if (the_target->pid_to_exec_file != NULL)
	strcat (own_buf, ";qXfer:exec-file:read+");

      strcat (own_buf, ";vContSupported+");

      strcat (own_buf, ";QThreadEvents+");

      strcat (own_buf, ";no-resumed+");

      /* Reinitialize components as needed for the new connection.  */
      hostio_handle_new_gdb_connection ();
      target_handle_new_gdb_connection ();

      return;
    }

  /* Thread-local storage support.  */
  if (the_target->get_tls_address != NULL
      && startswith (own_buf, "qGetTLSAddr:"))
    {
      char *p = own_buf + 12;
      CORE_ADDR parts[2], address = 0;
      int i, err;
      ptid_t ptid = null_ptid;

      require_running (own_buf);

      for (i = 0; i < 3; i++)
	{
	  char *p2;
	  int len;

	  if (p == NULL)
	    break;

	  p2 = strchr (p, ',');
	  if (p2)
	    {
	      len = p2 - p;
	      p2++;
	    }
	  else
	    {
	      len = strlen (p);
	      p2 = NULL;
	    }

	  if (i == 0)
	    ptid = read_ptid (p, NULL);
	  else
	    decode_address (&parts[i - 1], p, len);
	  p = p2;
	}

      if (p != NULL || i < 3)
	err = 1;
      else
	{
	  struct thread_info *thread = find_thread_ptid (ptid);

	  if (thread == NULL)
	    err = 2;
	  else
	    err = the_target->get_tls_address (thread, parts[0], parts[1],
					       &address);
	}

      if (err == 0)
	{
	  strcpy (own_buf, paddress(address));
	  return;
	}
      else if (err > 0)
	{
	  write_enn (own_buf);
	  return;
	}

      /* Otherwise, pretend we do not understand this packet.  */
    }

  /* Windows OS Thread Information Block address support.  */
  if (the_target->get_tib_address != NULL
      && startswith (own_buf, "qGetTIBAddr:"))
    {
      char *annex;
      int n;
      CORE_ADDR tlb;
      ptid_t ptid = read_ptid (own_buf + 12, &annex);

      n = (*the_target->get_tib_address) (ptid, &tlb);
      if (n == 1)
	{
	  strcpy (own_buf, paddress(tlb));
	  return;
	}
      else if (n == 0)
	{
	  write_enn (own_buf);
	  return;
	}
      return;
    }

  /* Handle "monitor" commands.  */
  if (startswith (own_buf, "qRcmd,"))
    {
      char *mon = (char *) malloc (PBUFSIZ);
      int len = strlen (own_buf + 6);

      if (mon == NULL)
	{
	  write_enn (own_buf);
	  return;
	}

      if ((len % 2) != 0
	  || hex2bin (own_buf + 6, (gdb_byte *) mon, len / 2) != len / 2)
	{
	  write_enn (own_buf);
	  free (mon);
	  return;
	}
      mon[len / 2] = '\0';

      write_ok (own_buf);

      if (the_target->handle_monitor_command == NULL
	  || (*the_target->handle_monitor_command) (mon) == 0)
	/* Default processing.  */
	handle_monitor_command (mon, own_buf);

      free (mon);
      return;
    }

  if (startswith (own_buf, "qSearch:memory:"))
    {
      require_running (own_buf);
      handle_search_memory (own_buf, packet_len);
      return;
    }

  if (strcmp (own_buf, "qAttached") == 0
      || startswith (own_buf, "qAttached:"))
    {
      struct process_info *process;

      if (own_buf[sizeof ("qAttached") - 1])
	{
	  int pid = strtoul (own_buf + sizeof ("qAttached:") - 1, NULL, 16);
	  process = (struct process_info *)
	    find_inferior_id (&all_processes, pid_to_ptid (pid));
	}
      else
	{
	  require_running (own_buf);
	  process = current_process ();
	}

      if (process == NULL)
	{
	  write_enn (own_buf);
	  return;
	}

      strcpy (own_buf, process->attached ? "1" : "0");
      return;
    }

  if (startswith (own_buf, "qCRC:"))
    {
      /* CRC check (compare-section).  */
      char *comma;
      ULONGEST base;
      int len;
      unsigned long long crc;

      require_running (own_buf);
      comma = unpack_varlen_hex (own_buf + 5, &base);
      if (*comma++ != ',')
	{
	  write_enn (own_buf);
	  return;
	}
      len = strtoul (comma, NULL, 16);
      crc = crc32 (base, len, 0xffffffff);
      /* Check for memory failure.  */
      if (crc == (unsigned long long) -1)
	{
	  write_enn (own_buf);
	  return;
	}
      sprintf (own_buf, "C%lx", (unsigned long) crc);
      return;
    }

  if (handle_qxfer (own_buf, packet_len, new_packet_len_p))
    return;

  if (target_supports_tracepoints () && handle_tracepoint_query (own_buf))
    return;

  /* Otherwise we didn't know what packet it was.  Say we didn't
     understand it.  */
  own_buf[0] = 0;
}

static void gdb_wants_all_threads_stopped (void);
static void resume (struct thread_resume *actions, size_t n);

/* The callback that is passed to visit_actioned_threads.  */
typedef int (visit_actioned_threads_callback_ftype)
  (const struct thread_resume *, struct thread_info *);

/* Struct to pass data to visit_actioned_threads.  */

struct visit_actioned_threads_data
{
  const struct thread_resume *actions;
  size_t num_actions;
  visit_actioned_threads_callback_ftype *callback;
};

/* Call CALLBACK for any thread to which ACTIONS applies to.  Returns
   true if CALLBACK returns true.  Returns false if no matching thread
   is found or CALLBACK results false.
   Note: This function is itself a callback for find_inferior.  */

static int
visit_actioned_threads (struct inferior_list_entry *entry, void *datap)
{
  struct visit_actioned_threads_data *data
    = (struct visit_actioned_threads_data *) datap;
  const struct thread_resume *actions = data->actions;
  size_t num_actions = data->num_actions;
  visit_actioned_threads_callback_ftype *callback = data->callback;
  size_t i;

  for (i = 0; i < num_actions; i++)
    {
      const struct thread_resume *action = &actions[i];

      if (ptid_equal (action->thread, minus_one_ptid)
	  || ptid_equal (action->thread, entry->id)
	  || ((ptid_get_pid (action->thread)
	       == ptid_get_pid (entry->id))
	      && ptid_get_lwp (action->thread) == -1))
	{
	  struct thread_info *thread = (struct thread_info *) entry;

	  if ((*callback) (action, thread))
	    return 1;
	}
    }

  return 0;
}

/* Callback for visit_actioned_threads.  If the thread has a pending
   status to report, report it now.  */

static int
handle_pending_status (const struct thread_resume *resumption,
		       struct thread_info *thread)
{
  if (thread->status_pending_p)
    {
      thread->status_pending_p = 0;

      last_status = thread->last_status;
      last_ptid = thread->entry.id;
      prepare_resume_reply (own_buf, last_ptid, &last_status);
      return 1;
    }
  return 0;
}

/* Parse vCont packets.  */
static void
handle_v_cont (char *own_buf)
{
  char *p, *q;
  int n = 0, i = 0;
  struct thread_resume *resume_info;
  struct thread_resume default_action = {{0}};

  /* Count the number of semicolons in the packet.  There should be one
     for every action.  */
  p = &own_buf[5];
  while (p)
    {
      n++;
      p++;
      p = strchr (p, ';');
    }

  resume_info = (struct thread_resume *) malloc (n * sizeof (resume_info[0]));
  if (resume_info == NULL)
    goto err;

  p = &own_buf[5];
  while (*p)
    {
      p++;

      memset (&resume_info[i], 0, sizeof resume_info[i]);

      if (p[0] == 's' || p[0] == 'S')
	resume_info[i].kind = resume_step;
      else if (p[0] == 'r')
	resume_info[i].kind = resume_step;
      else if (p[0] == 'c' || p[0] == 'C')
	resume_info[i].kind = resume_continue;
      else if (p[0] == 't')
	resume_info[i].kind = resume_stop;
      else
	goto err;

      if (p[0] == 'S' || p[0] == 'C')
	{
	  int sig;
	  sig = strtol (p + 1, &q, 16);
	  if (p == q)
	    goto err;
	  p = q;

	  if (!gdb_signal_to_host_p ((enum gdb_signal) sig))
	    goto err;
	  resume_info[i].sig = gdb_signal_to_host ((enum gdb_signal) sig);
	}
      else if (p[0] == 'r')
	{
	  ULONGEST addr;

	  p = unpack_varlen_hex (p + 1, &addr);
	  resume_info[i].step_range_start = addr;

	  if (*p != ',')
	    goto err;

	  p = unpack_varlen_hex (p + 1, &addr);
	  resume_info[i].step_range_end = addr;
	}
      else
	{
	  p = p + 1;
	}

      if (p[0] == 0)
	{
	  resume_info[i].thread = minus_one_ptid;
	  default_action = resume_info[i];

	  /* Note: we don't increment i here, we'll overwrite this entry
	     the next time through.  */
	}
      else if (p[0] == ':')
	{
	  ptid_t ptid = read_ptid (p + 1, &q);

	  if (p == q)
	    goto err;
	  p = q;
	  if (p[0] != ';' && p[0] != 0)
	    goto err;

	  resume_info[i].thread = ptid;

	  i++;
	}
    }

  if (i < n)
    resume_info[i] = default_action;

  resume (resume_info, n);
  free (resume_info);
  return;

err:
  write_enn (own_buf);
  free (resume_info);
  return;
}

/* Resume target with ACTIONS, an array of NUM_ACTIONS elements.  */

static void
resume (struct thread_resume *actions, size_t num_actions)
{
  if (!non_stop)
    {
      /* Check if among the threads that GDB wants actioned, there's
	 one with a pending status to report.  If so, skip actually
	 resuming/stopping and report the pending event
	 immediately.  */
      struct visit_actioned_threads_data data;

      data.actions = actions;
      data.num_actions = num_actions;
      data.callback = handle_pending_status;
      if (find_inferior (&all_threads, visit_actioned_threads, &data) != NULL)
	return;

      enable_async_io ();
    }

  (*the_target->resume) (actions, num_actions);

  if (non_stop)
    write_ok (own_buf);
  else
    {
      last_ptid = mywait (minus_one_ptid, &last_status, 0, 1);

      if (last_status.kind == TARGET_WAITKIND_NO_RESUMED
	  && !report_no_resumed)
	{
	  /* The client does not support this stop reply.  At least
	     return error.  */
	  sprintf (own_buf, "E.No unwaited-for children left.");
	  disable_async_io ();
	  return;
	}

      if (last_status.kind != TARGET_WAITKIND_EXITED
          && last_status.kind != TARGET_WAITKIND_SIGNALLED
	  && last_status.kind != TARGET_WAITKIND_NO_RESUMED)
	current_thread->last_status = last_status;

      /* From the client's perspective, all-stop mode always stops all
	 threads implicitly (and the target backend has already done
	 so by now).  Tag all threads as "want-stopped", so we don't
	 resume them implicitly without the client telling us to.  */
      gdb_wants_all_threads_stopped ();
      prepare_resume_reply (own_buf, last_ptid, &last_status);
      disable_async_io ();

      if (last_status.kind == TARGET_WAITKIND_EXITED
          || last_status.kind == TARGET_WAITKIND_SIGNALLED)
        mourn_inferior (find_process_pid (ptid_get_pid (last_ptid)));
    }
}

/* Attach to a new program.  Return 1 if successful, 0 if failure.  */
static int
handle_v_attach (char *own_buf)
{
  int pid;

  pid = strtol (own_buf + 8, NULL, 16);
  if (pid != 0 && attach_inferior (pid) == 0)
    {
      /* Don't report shared library events after attaching, even if
	 some libraries are preloaded.  GDB will always poll the
	 library list.  Avoids the "stopped by shared library event"
	 notice on the GDB side.  */
      dlls_changed = 0;

      if (non_stop)
	{
	  /* In non-stop, we don't send a resume reply.  Stop events
	     will follow up using the normal notification
	     mechanism.  */
	  write_ok (own_buf);
	}
      else
	prepare_resume_reply (own_buf, last_ptid, &last_status);

      return 1;
    }
  else
    {
      write_enn (own_buf);
      return 0;
    }
}

/* Run a new program.  Return 1 if successful, 0 if failure.  */
static int
handle_v_run (char *own_buf)
{
  char *p, *next_p, **new_argv;
  int i, new_argc;

  new_argc = 0;
  for (p = own_buf + strlen ("vRun;"); p && *p; p = strchr (p, ';'))
    {
      p++;
      new_argc++;
    }

  new_argv = (char **) calloc (new_argc + 2, sizeof (char *));
  if (new_argv == NULL)
    {
      write_enn (own_buf);
      return 0;
    }

  i = 0;
  for (p = own_buf + strlen ("vRun;"); *p; p = next_p)
    {
      next_p = strchr (p, ';');
      if (next_p == NULL)
	next_p = p + strlen (p);

      if (i == 0 && p == next_p)
	new_argv[i] = NULL;
      else
	{
	  /* FIXME: Fail request if out of memory instead of dying.  */
	  new_argv[i] = (char *) xmalloc (1 + (next_p - p) / 2);
	  hex2bin (p, (gdb_byte *) new_argv[i], (next_p - p) / 2);
	  new_argv[i][(next_p - p) / 2] = '\0';
	}

      if (*next_p)
	next_p++;
      i++;
    }
  new_argv[i] = NULL;

  if (new_argv[0] == NULL)
    {
      /* GDB didn't specify a program to run.  Use the program from the
	 last run with the new argument list.  */

      if (program_argv == NULL)
	{
	  write_enn (own_buf);
	  freeargv (new_argv);
	  return 0;
	}

      new_argv[0] = strdup (program_argv[0]);
      if (new_argv[0] == NULL)
	{
	  write_enn (own_buf);
	  freeargv (new_argv);
	  return 0;
	}
    }

  /* Free the old argv and install the new one.  */
  freeargv (program_argv);
  program_argv = new_argv;

  start_inferior (program_argv);
  if (last_status.kind == TARGET_WAITKIND_STOPPED)
    {
      prepare_resume_reply (own_buf, last_ptid, &last_status);

      /* In non-stop, sending a resume reply doesn't set the general
	 thread, but GDB assumes a vRun sets it (this is so GDB can
	 query which is the main thread of the new inferior.  */
      if (non_stop)
	general_thread = last_ptid;

      return 1;
    }
  else
    {
      write_enn (own_buf);
      return 0;
    }
}

/* Kill process.  Return 1 if successful, 0 if failure.  */
static int
handle_v_kill (char *own_buf)
{
  int pid;
  char *p = &own_buf[6];
  if (multi_process)
    pid = strtol (p, NULL, 16);
  else
    pid = signal_pid;
  if (pid != 0 && kill_inferior (pid) == 0)
    {
      last_status.kind = TARGET_WAITKIND_SIGNALLED;
      last_status.value.sig = GDB_SIGNAL_KILL;
      last_ptid = pid_to_ptid (pid);
      discard_queued_stop_replies (last_ptid);
      write_ok (own_buf);
      return 1;
    }
  else
    {
      write_enn (own_buf);
      return 0;
    }
}

/* Handle all of the extended 'v' packets.  */
void
handle_v_requests (char *own_buf, int packet_len, int *new_packet_len)
{
  if (!disable_packet_vCont)
    {
      if (strcmp (own_buf, "vCtrlC") == 0)
	{
	  (*the_target->request_interrupt) ();
	  write_ok (own_buf);
	  return;
	}

      if (startswith (own_buf, "vCont;"))
	{
	  require_running (own_buf);
	  handle_v_cont (own_buf);
	  return;
	}

      if (startswith (own_buf, "vCont?"))
	{
	  strcpy (own_buf, "vCont;c;C;t");

	  if (target_supports_hardware_single_step () || !vCont_supported)
	    {
	      /* If target supports hardware single step, add actions s
		 and S to the list of supported actions.  On the other
		 hand, if GDB doesn't request the supported vCont actions
		 in qSupported packet, add s and S to the list too.  */
	      own_buf = own_buf + strlen (own_buf);
	      strcpy (own_buf, ";s;S");
	    }

	  if (target_supports_range_stepping ())
	    {
	      own_buf = own_buf + strlen (own_buf);
	      strcpy (own_buf, ";r");
	    }
	  return;
	}
    }

  if (startswith (own_buf, "vFile:")
      && handle_vFile (own_buf, packet_len, new_packet_len))
    return;

  if (startswith (own_buf, "vAttach;"))
    {
      if ((!extended_protocol || !multi_process) && target_running ())
	{
	  fprintf (stderr, "Already debugging a process\n");
	  write_enn (own_buf);
	  return;
	}
      handle_v_attach (own_buf);
      return;
    }

  if (startswith (own_buf, "vRun;"))
    {
      if ((!extended_protocol || !multi_process) && target_running ())
	{
	  fprintf (stderr, "Already debugging a process\n");
	  write_enn (own_buf);
	  return;
	}
      handle_v_run (own_buf);
      return;
    }

  if (startswith (own_buf, "vKill;"))
    {
      if (!target_running ())
	{
	  fprintf (stderr, "No process to kill\n");
	  write_enn (own_buf);
	  return;
	}
      handle_v_kill (own_buf);
      return;
    }

  if (handle_notif_ack (own_buf, packet_len))
    return;

  /* Otherwise we didn't know what packet it was.  Say we didn't
     understand it.  */
  own_buf[0] = 0;
  return;
}

/* Resume thread and wait for another event.  In non-stop mode,
   don't really wait here, but return immediatelly to the event
   loop.  */
static void
myresume (char *own_buf, int step, int sig)
{
  struct thread_resume resume_info[2];
  int n = 0;
  int valid_cont_thread;

  valid_cont_thread = (!ptid_equal (cont_thread, null_ptid)
			 && !ptid_equal (cont_thread, minus_one_ptid));

  if (step || sig || valid_cont_thread)
    {
      resume_info[0].thread = current_ptid;
      if (step)
	resume_info[0].kind = resume_step;
      else
	resume_info[0].kind = resume_continue;
      resume_info[0].sig = sig;
      n++;
    }

  if (!valid_cont_thread)
    {
      resume_info[n].thread = minus_one_ptid;
      resume_info[n].kind = resume_continue;
      resume_info[n].sig = 0;
      n++;
    }

  resume (resume_info, n);
}

/* Callback for for_each_inferior.  Make a new stop reply for each
   stopped thread.  */

static int
queue_stop_reply_callback (struct inferior_list_entry *entry, void *arg)
{
  struct thread_info *thread = (struct thread_info *) entry;

  /* For now, assume targets that don't have this callback also don't
     manage the thread's last_status field.  */
  if (the_target->thread_stopped == NULL)
    {
      struct vstop_notif *new_notif = XNEW (struct vstop_notif);

      new_notif->ptid = entry->id;
      new_notif->status = thread->last_status;
      /* Pass the last stop reply back to GDB, but don't notify
	 yet.  */
      notif_event_enque (&notif_stop,
			 (struct notif_event *) new_notif);
    }
  else
    {
      if (thread_stopped (thread))
	{
	  if (debug_threads)
	    {
	      char *status_string
		= target_waitstatus_to_string (&thread->last_status);

	      debug_printf ("Reporting thread %s as already stopped with %s\n",
			    target_pid_to_str (entry->id),
			    status_string);

	      xfree (status_string);
	    }

	  gdb_assert (thread->last_status.kind != TARGET_WAITKIND_IGNORE);

	  /* Pass the last stop reply back to GDB, but don't notify
	     yet.  */
	  queue_stop_reply (entry->id, &thread->last_status);
	}
    }

  return 0;
}

/* Set this inferior threads's state as "want-stopped".  We won't
   resume this thread until the client gives us another action for
   it.  */

static void
gdb_wants_thread_stopped (struct inferior_list_entry *entry)
{
  struct thread_info *thread = (struct thread_info *) entry;

  thread->last_resume_kind = resume_stop;

  if (thread->last_status.kind == TARGET_WAITKIND_IGNORE)
    {
      /* Most threads are stopped implicitly (all-stop); tag that with
	 signal 0.  */
      thread->last_status.kind = TARGET_WAITKIND_STOPPED;
      thread->last_status.value.sig = GDB_SIGNAL_0;
    }
}

/* Set all threads' states as "want-stopped".  */

static void
gdb_wants_all_threads_stopped (void)
{
  for_each_inferior (&all_threads, gdb_wants_thread_stopped);
}

/* Clear the gdb_detached flag of every process.  */

static void
gdb_reattached_process (struct inferior_list_entry *entry)
{
  struct process_info *process = (struct process_info *) entry;

  process->gdb_detached = 0;
}

/* Callback for for_each_inferior.  Clear the thread's pending status
   flag.  */

static void
clear_pending_status_callback (struct inferior_list_entry *entry)
{
  struct thread_info *thread = (struct thread_info *) entry;

  thread->status_pending_p = 0;
}

/* Callback for for_each_inferior.  If the thread is stopped with an
   interesting event, mark it as having a pending event.  */

static void
set_pending_status_callback (struct inferior_list_entry *entry)
{
  struct thread_info *thread = (struct thread_info *) entry;

  if (thread->last_status.kind != TARGET_WAITKIND_STOPPED
      || (thread->last_status.value.sig != GDB_SIGNAL_0
	  /* A breakpoint, watchpoint or finished step from a previous
	     GDB run isn't considered interesting for a new GDB run.
	     If we left those pending, the new GDB could consider them
	     random SIGTRAPs.  This leaves out real async traps.  We'd
	     have to peek into the (target-specific) siginfo to
	     distinguish those.  */
	  && thread->last_status.value.sig != GDB_SIGNAL_TRAP))
    thread->status_pending_p = 1;
}

/* Callback for find_inferior.  Return true if ENTRY (a thread) has a
   pending status to report to GDB.  */

static int
find_status_pending_thread_callback (struct inferior_list_entry *entry, void *data)
{
  struct thread_info *thread = (struct thread_info *) entry;

  return thread->status_pending_p;
}

/* Status handler for the '?' packet.  */

static void
handle_status (char *own_buf)
{
  /* GDB is connected, don't forward events to the target anymore.  */
  for_each_inferior (&all_processes, gdb_reattached_process);

  /* In non-stop mode, we must send a stop reply for each stopped
     thread.  In all-stop mode, just send one for the first stopped
     thread we find.  */

  if (non_stop)
    {
      find_inferior (&all_threads, queue_stop_reply_callback, NULL);

      /* The first is sent immediatly.  OK is sent if there is no
	 stopped thread, which is the same handling of the vStopped
	 packet (by design).  */
      notif_write_event (&notif_stop, own_buf);
    }
  else
    {
      struct inferior_list_entry *thread = NULL;

      pause_all (0);
      stabilize_threads ();
      gdb_wants_all_threads_stopped ();

      /* We can only report one status, but we might be coming out of
	 non-stop -- if more than one thread is stopped with
	 interesting events, leave events for the threads we're not
	 reporting now pending.  They'll be reported the next time the
	 threads are resumed.  Start by marking all interesting events
	 as pending.  */
      for_each_inferior (&all_threads, set_pending_status_callback);

      /* Prefer the last thread that reported an event to GDB (even if
	 that was a GDB_SIGNAL_TRAP).  */
      if (last_status.kind != TARGET_WAITKIND_IGNORE
	  && last_status.kind != TARGET_WAITKIND_EXITED
	  && last_status.kind != TARGET_WAITKIND_SIGNALLED)
	thread = find_inferior_id (&all_threads, last_ptid);

      /* If the last event thread is not found for some reason, look
	 for some other thread that might have an event to report.  */
      if (thread == NULL)
	thread = find_inferior (&all_threads,
				find_status_pending_thread_callback, NULL);

      /* If we're still out of luck, simply pick the first thread in
	 the thread list.  */
      if (thread == NULL)
	thread = get_first_inferior (&all_threads);

      if (thread != NULL)
	{
	  struct thread_info *tp = (struct thread_info *) thread;

	  /* We're reporting this event, so it's no longer
	     pending.  */
	  tp->status_pending_p = 0;

	  /* GDB assumes the current thread is the thread we're
	     reporting the status for.  */
	  general_thread = thread->id;
	  set_desired_thread (1);

	  gdb_assert (tp->last_status.kind != TARGET_WAITKIND_IGNORE);
	  prepare_resume_reply (own_buf, tp->entry.id, &tp->last_status);
	}
      else
	strcpy (own_buf, "W00");
    }
}

static void
gdbserver_version (void)
{
  printf ("GNU gdbserver %s%s\n"
	  "Copyright (C) 2016 Free Software Foundation, Inc.\n"
	  "gdbserver is free software, covered by the "
	  "GNU General Public License.\n"
	  "This gdbserver was configured as \"%s\"\n",
	  PKGVERSION, version, host_name);
}

static void
gdbserver_usage (FILE *stream)
{
  fprintf (stream, "Usage:\tgdbserver [OPTIONS] COMM PROG [ARGS ...]\n"
	   "\tgdbserver [OPTIONS] --attach COMM PID\n"
	   "\tgdbserver [OPTIONS] --multi COMM\n"
	   "\n"
	   "COMM may either be a tty device (for serial debugging),\n"
	   "HOST:PORT to listen for a TCP connection, or '-' or 'stdio' to use \n"
	   "stdin/stdout of gdbserver.\n"
	   "PROG is the executable program.  ARGS are arguments passed to inferior.\n"
	   "PID is the process ID to attach to, when --attach is specified.\n"
	   "\n"
	   "Operating modes:\n"
	   "\n"
	   "  --attach              Attach to running process PID.\n"
	   "  --multi               Start server without a specific program, and\n"
	   "                        only quit when explicitly commanded.\n"
	   "  --once                Exit after the first connection has closed.\n"
	   "  --help                Print this message and then exit.\n"
	   "  --version             Display version information and exit.\n"
	   "\n"
	   "Other options:\n"
	   "\n"
	   "  --wrapper WRAPPER --  Run WRAPPER to start new programs.\n"
	   "  --disable-randomization\n"
	   "                        Run PROG with address space randomization disabled.\n"
	   "  --no-disable-randomization\n"
	   "                        Don't disable address space randomization when\n"
	   "                        starting PROG.\n"
	   "\n"
	   "Debug options:\n"
	   "\n"
	   "  --debug               Enable general debugging output.\n"
	   "  --debug-format=opt1[,opt2,...]\n"
	   "                        Specify extra content in debugging output.\n"
	   "                          Options:\n"
	   "                            all\n"
	   "                            none\n"
	   "                            timestamp\n"
	   "  --remote-debug        Enable remote protocol debugging output.\n"
	   "  --disable-packet=opt1[,opt2,...]\n"
	   "                        Disable support for RSP packets or features.\n"
	   "                          Options:\n"
	   "                            vCont, Tthread, qC, qfThreadInfo and \n"
	   "                            threads (disable all threading packets).\n"
	   "\n"
	   "For more information, consult the GDB manual (available as on-line \n"
	   "info or a printed manual).\n");
  if (REPORT_BUGS_TO[0] && stream == stdout)
    fprintf (stream, "Report bugs to \"%s\".\n", REPORT_BUGS_TO);
}

static void
gdbserver_show_disableable (FILE *stream)
{
  fprintf (stream, "Disableable packets:\n"
	   "  vCont       \tAll vCont packets\n"
	   "  qC          \tQuerying the current thread\n"
	   "  qfThreadInfo\tThread listing\n"
	   "  Tthread     \tPassing the thread specifier in the "
	   "T stop reply packet\n"
	   "  threads     \tAll of the above\n");
}


#undef require_running
#define require_running(BUF)			\
  if (!target_running ())			\
    {						\
      write_enn (BUF);				\
      break;					\
    }

static int
first_thread_of (struct inferior_list_entry *entry, void *args)
{
  int pid = * (int *) args;

  if (ptid_get_pid (entry->id) == pid)
    return 1;

  return 0;
}

static void
kill_inferior_callback (struct inferior_list_entry *entry)
{
  struct process_info *process = (struct process_info *) entry;
  int pid = ptid_get_pid (process->entry.id);

  kill_inferior (pid);
  discard_queued_stop_replies (pid_to_ptid (pid));
}

/* Callback for for_each_inferior to detach or kill the inferior,
   depending on whether we attached to it or not.
   We inform the user whether we're detaching or killing the process
   as this is only called when gdbserver is about to exit.  */

static void
detach_or_kill_inferior_callback (struct inferior_list_entry *entry)
{
  struct process_info *process = (struct process_info *) entry;
  int pid = ptid_get_pid (process->entry.id);

  if (process->attached)
    detach_inferior (pid);
  else
    kill_inferior (pid);

  discard_queued_stop_replies (pid_to_ptid (pid));
}

/* for_each_inferior callback for detach_or_kill_for_exit to print
   the pids of started inferiors.  */

static void
print_started_pid (struct inferior_list_entry *entry)
{
  struct process_info *process = (struct process_info *) entry;

  if (! process->attached)
    {
      int pid = ptid_get_pid (process->entry.id);
      fprintf (stderr, " %d", pid);
    }
}

/* for_each_inferior callback for detach_or_kill_for_exit to print
   the pids of attached inferiors.  */

static void
print_attached_pid (struct inferior_list_entry *entry)
{
  struct process_info *process = (struct process_info *) entry;

  if (process->attached)
    {
      int pid = ptid_get_pid (process->entry.id);
      fprintf (stderr, " %d", pid);
    }
}

/* Call this when exiting gdbserver with possible inferiors that need
   to be killed or detached from.  */

static void
detach_or_kill_for_exit (void)
{
  /* First print a list of the inferiors we will be killing/detaching.
     This is to assist the user, for example, in case the inferior unexpectedly
     dies after we exit: did we screw up or did the inferior exit on its own?
     Having this info will save some head-scratching.  */

  if (have_started_inferiors_p ())
    {
      fprintf (stderr, "Killing process(es):");
      for_each_inferior (&all_processes, print_started_pid);
      fprintf (stderr, "\n");
    }
  if (have_attached_inferiors_p ())
    {
      fprintf (stderr, "Detaching process(es):");
      for_each_inferior (&all_processes, print_attached_pid);
      fprintf (stderr, "\n");
    }

  /* Now we can kill or detach the inferiors.  */

  for_each_inferior (&all_processes, detach_or_kill_inferior_callback);
}

/* Value that will be passed to exit(3) when gdbserver exits.  */
static int exit_code;

/* Cleanup version of detach_or_kill_for_exit.  */

static void
detach_or_kill_for_exit_cleanup (void *ignore)
{

  TRY
    {
      detach_or_kill_for_exit ();
    }

  CATCH (exception, RETURN_MASK_ALL)
    {
      fflush (stdout);
      fprintf (stderr, "Detach or kill failed: %s\n", exception.message);
      exit_code = 1;
    }
  END_CATCH
}

/* Main function.  This is called by the real "main" function,
   wrapped in a TRY_CATCH that handles any uncaught exceptions.  */

static void ATTRIBUTE_NORETURN
captured_main (int argc, char *argv[])
{
  int bad_attach;
  int pid;
  char *arg_end, *port;
  char **next_arg = &argv[1];
  volatile int multi_mode = 0;
  volatile int attach = 0;
  int was_running;

  while (*next_arg != NULL && **next_arg == '-')
    {
      if (strcmp (*next_arg, "--version") == 0)
	{
	  gdbserver_version ();
	  exit (0);
	}
      else if (strcmp (*next_arg, "--help") == 0)
	{
	  gdbserver_usage (stdout);
	  exit (0);
	}
      else if (strcmp (*next_arg, "--attach") == 0)
	attach = 1;
      else if (strcmp (*next_arg, "--multi") == 0)
	multi_mode = 1;
      else if (strcmp (*next_arg, "--wrapper") == 0)
	{
	  next_arg++;

	  wrapper_argv = next_arg;
	  while (*next_arg != NULL && strcmp (*next_arg, "--") != 0)
	    next_arg++;

	  if (next_arg == wrapper_argv || *next_arg == NULL)
	    {
	      gdbserver_usage (stderr);
	      exit (1);
	    }

	  /* Consume the "--".  */
	  *next_arg = NULL;
	}
      else if (strcmp (*next_arg, "--debug") == 0)
	debug_threads = 1;
      else if (startswith (*next_arg, "--debug-format="))
	{
	  char *error_msg
	    = parse_debug_format_options ((*next_arg)
					  + sizeof ("--debug-format=") - 1, 0);

	  if (error_msg != NULL)
	    {
	      fprintf (stderr, "%s", error_msg);
	      exit (1);
	    }
	}
      else if (strcmp (*next_arg, "--remote-debug") == 0)
	remote_debug = 1;
      else if (strcmp (*next_arg, "--disable-packet") == 0)
	{
	  gdbserver_show_disableable (stdout);
	  exit (0);
	}
      else if (startswith (*next_arg, "--disable-packet="))
	{
	  char *packets, *tok;

	  packets = *next_arg += sizeof ("--disable-packet=") - 1;
	  for (tok = strtok (packets, ",");
	       tok != NULL;
	       tok = strtok (NULL, ","))
	    {
	      if (strcmp ("vCont", tok) == 0)
		disable_packet_vCont = 1;
	      else if (strcmp ("Tthread", tok) == 0)
		disable_packet_Tthread = 1;
	      else if (strcmp ("qC", tok) == 0)
		disable_packet_qC = 1;
	      else if (strcmp ("qfThreadInfo", tok) == 0)
		disable_packet_qfThreadInfo = 1;
	      else if (strcmp ("threads", tok) == 0)
		{
		  disable_packet_vCont = 1;
		  disable_packet_Tthread = 1;
		  disable_packet_qC = 1;
		  disable_packet_qfThreadInfo = 1;
		}
	      else
		{
		  fprintf (stderr, "Don't know how to disable \"%s\".\n\n",
			   tok);
		  gdbserver_show_disableable (stderr);
		  exit (1);
		}
	    }
	}
      else if (strcmp (*next_arg, "-") == 0)
	{
	  /* "-" specifies a stdio connection and is a form of port
	     specification.  */
	  *next_arg = STDIO_CONNECTION_NAME;
	  break;
	}
      else if (strcmp (*next_arg, "--disable-randomization") == 0)
	disable_randomization = 1;
      else if (strcmp (*next_arg, "--no-disable-randomization") == 0)
	disable_randomization = 0;
      else if (strcmp (*next_arg, "--once") == 0)
	run_once = 1;
      else
	{
	  fprintf (stderr, "Unknown argument: %s\n", *next_arg);
	  exit (1);
	}

      next_arg++;
      continue;
    }

  port = *next_arg;
  next_arg++;
  if (port == NULL || (!attach && !multi_mode && *next_arg == NULL))
    {
      gdbserver_usage (stderr);
      exit (1);
    }

  /* Remember stdio descriptors.  LISTEN_DESC must not be listed, it will be
     opened by remote_prepare.  */
  notice_open_fds ();

  /* We need to know whether the remote connection is stdio before
     starting the inferior.  Inferiors created in this scenario have
     stdin,stdout redirected.  So do this here before we call
     start_inferior.  */
  remote_prepare (port);

  bad_attach = 0;
  pid = 0;

  /* --attach used to come after PORT, so allow it there for
       compatibility.  */
  if (*next_arg != NULL && strcmp (*next_arg, "--attach") == 0)
    {
      attach = 1;
      next_arg++;
    }

  if (attach
      && (*next_arg == NULL
	  || (*next_arg)[0] == '\0'
	  || (pid = strtoul (*next_arg, &arg_end, 0)) == 0
	  || *arg_end != '\0'
	  || next_arg[1] != NULL))
    bad_attach = 1;

  if (bad_attach)
    {
      gdbserver_usage (stderr);
      exit (1);
    }

  initialize_async_io ();
  initialize_low ();
  initialize_event_loop ();
  if (target_supports_tracepoints ())
    initialize_tracepoint ();
  initialize_notif ();

  own_buf = (char *) xmalloc (PBUFSIZ + 1);
  mem_buf = (unsigned char *) xmalloc (PBUFSIZ);

  if (pid == 0 && *next_arg != NULL)
    {
      int i, n;

      n = argc - (next_arg - argv);
      program_argv = XNEWVEC (char *, n + 1);
      for (i = 0; i < n; i++)
	program_argv[i] = xstrdup (next_arg[i]);
      program_argv[i] = NULL;

      /* Wait till we are at first instruction in program.  */
      start_inferior (program_argv);

      /* We are now (hopefully) stopped at the first instruction of
	 the target process.  This assumes that the target process was
	 successfully created.  */
    }
  else if (pid != 0)
    {
      if (attach_inferior (pid) == -1)
	error ("Attaching not supported on this target");

      /* Otherwise succeeded.  */
    }
  else
    {
      last_status.kind = TARGET_WAITKIND_EXITED;
      last_status.value.integer = 0;
      last_ptid = minus_one_ptid;
    }
  make_cleanup (detach_or_kill_for_exit_cleanup, NULL);

  /* Don't report shared library events on the initial connection,
     even if some libraries are preloaded.  Avoids the "stopped by
     shared library event" notice on gdb side.  */
  dlls_changed = 0;

  if (last_status.kind == TARGET_WAITKIND_EXITED
      || last_status.kind == TARGET_WAITKIND_SIGNALLED)
    was_running = 0;
  else
    was_running = 1;

  if (!was_running && !multi_mode)
    error ("No program to debug");

  while (1)
    {

      noack_mode = 0;
      multi_process = 0;
      report_fork_events = 0;
      report_vfork_events = 0;
      report_exec_events = 0;
      /* Be sure we're out of tfind mode.  */
      current_traceframe = -1;
      cont_thread = null_ptid;
      swbreak_feature = 0;
      hwbreak_feature = 0;
      vCont_supported = 0;

      remote_open (port);

      TRY
	{
	  /* Wait for events.  This will return when all event sources
	     are removed from the event loop.  */
	  start_event_loop ();

	  /* If an exit was requested (using the "monitor exit"
	     command), terminate now.  */
	  if (exit_requested)
	    throw_quit ("Quit");

	  /* The only other way to get here is for getpkt to fail:

	      - If --once was specified, we're done.

	      - If not in extended-remote mode, and we're no longer
	        debugging anything, simply exit: GDB has disconnected
	        after processing the last process exit.

	      - Otherwise, close the connection and reopen it at the
	        top of the loop.  */
	  if (run_once || (!extended_protocol && !target_running ()))
	    throw_quit ("Quit");

	  fprintf (stderr,
		   "Remote side has terminated connection.  "
		   "GDBserver will reopen the connection.\n");

	  /* Get rid of any pending statuses.  An eventual reconnection
	     (by the same GDB instance or another) will refresh all its
	     state from scratch.  */
	  discard_queued_stop_replies (minus_one_ptid);
	  for_each_inferior (&all_threads,
			     clear_pending_status_callback);

	  if (tracing)
	    {
	      if (disconnected_tracing)
		{
		  /* Try to enable non-stop/async mode, so we we can
		     both wait for an async socket accept, and handle
		     async target events simultaneously.  There's also
		     no point either in having the target always stop
		     all threads, when we're going to pass signals
		     down without informing GDB.  */
		  if (!non_stop)
		    {
		      if (start_non_stop (1))
			non_stop = 1;

		      /* Detaching implicitly resumes all threads;
			 simply disconnecting does not.  */
		    }
		}
	      else
		{
		  fprintf (stderr,
			   "Disconnected tracing disabled; "
			   "stopping trace run.\n");
		  stop_tracing ();
		}
	    }
	}
      CATCH (exception, RETURN_MASK_ERROR)
	{
	  fflush (stdout);
	  fprintf (stderr, "gdbserver: %s\n", exception.message);

	  if (response_needed)
	    {
	      write_enn (own_buf);
	      putpkt (own_buf);
	    }

	  if (run_once)
	    throw_quit ("Quit");
	}
      END_CATCH
    }
}

/* Main function.  */

int
main (int argc, char *argv[])
{

  TRY
    {
      captured_main (argc, argv);
    }
  CATCH (exception, RETURN_MASK_ALL)
    {
      if (exception.reason == RETURN_ERROR)
	{
	  fflush (stdout);
	  fprintf (stderr, "%s\n", exception.message);
	  fprintf (stderr, "Exiting\n");
	  exit_code = 1;
	}

      exit (exit_code);
    }
  END_CATCH

  gdb_assert_not_reached ("captured_main should never return");
}

/* Process options coming from Z packets for a breakpoint.  PACKET is
   the packet buffer.  *PACKET is updated to point to the first char
   after the last processed option.  */

static void
process_point_options (struct breakpoint *bp, char **packet)
{
  char *dataptr = *packet;
  int persist;

  /* Check if data has the correct format.  */
  if (*dataptr != ';')
    return;

  dataptr++;

  while (*dataptr)
    {
      if (*dataptr == ';')
	++dataptr;

      if (*dataptr == 'X')
	{
	  /* Conditional expression.  */
	  if (debug_threads)
	    debug_printf ("Found breakpoint condition.\n");
	  if (!add_breakpoint_condition (bp, &dataptr))
	    dataptr = strchrnul (dataptr, ';');
	}
      else if (startswith (dataptr, "cmds:"))
	{
	  dataptr += strlen ("cmds:");
	  if (debug_threads)
	    debug_printf ("Found breakpoint commands %s.\n", dataptr);
	  persist = (*dataptr == '1');
	  dataptr += 2;
	  if (add_breakpoint_commands (bp, &dataptr, persist))
	    dataptr = strchrnul (dataptr, ';');
	}
      else
	{
	  fprintf (stderr, "Unknown token %c, ignoring.\n",
		   *dataptr);
	  /* Skip tokens until we find one that we recognize.  */
	  dataptr = strchrnul (dataptr, ';');
	}
    }
  *packet = dataptr;
}

/* Event loop callback that handles a serial event.  The first byte in
   the serial buffer gets us here.  We expect characters to arrive at
   a brisk pace, so we read the rest of the packet with a blocking
   getpkt call.  */

static int
process_serial_event (void)
{
  char ch;
  int i = 0;
  int signal;
  unsigned int len;
  int res;
  CORE_ADDR mem_addr;
  int pid;
  unsigned char sig;
  int packet_len;
  int new_packet_len = -1;

  disable_async_io ();

  response_needed = 0;
  packet_len = getpkt (own_buf);
  if (packet_len <= 0)
    {
      remote_close ();
      /* Force an event loop break.  */
      return -1;
    }
  response_needed = 1;

  i = 0;
  ch = own_buf[i++];
  switch (ch)
    {
    case 'q':
      handle_query (own_buf, packet_len, &new_packet_len);
      break;
    case 'Q':
      handle_general_set (own_buf);
      break;
    case 'D':
      require_running (own_buf);

      if (multi_process)
	{
	  i++; /* skip ';' */
	  pid = strtol (&own_buf[i], NULL, 16);
	}
      else
	pid = ptid_get_pid (current_ptid);

      if ((tracing && disconnected_tracing) || any_persistent_commands ())
	{
	  struct thread_resume resume_info;
	  struct process_info *process = find_process_pid (pid);

	  if (process == NULL)
	    {
	      write_enn (own_buf);
	      break;
	    }

	  if (tracing && disconnected_tracing)
	    fprintf (stderr,
		     "Disconnected tracing in effect, "
		     "leaving gdbserver attached to the process\n");

	  if (any_persistent_commands ())
	    fprintf (stderr,
		     "Persistent commands are present, "
		     "leaving gdbserver attached to the process\n");

	  /* Make sure we're in non-stop/async mode, so we we can both
	     wait for an async socket accept, and handle async target
	     events simultaneously.  There's also no point either in
	     having the target stop all threads, when we're going to
	     pass signals down without informing GDB.  */
	  if (!non_stop)
	    {
	      if (debug_threads)
		debug_printf ("Forcing non-stop mode\n");

	      non_stop = 1;
	      start_non_stop (1);
	    }

	  process->gdb_detached = 1;

	  /* Detaching implicitly resumes all threads.  */
	  resume_info.thread = minus_one_ptid;
	  resume_info.kind = resume_continue;
	  resume_info.sig = 0;
	  (*the_target->resume) (&resume_info, 1);

	  write_ok (own_buf);
	  break; /* from switch/case */
	}

      fprintf (stderr, "Detaching from process %d\n", pid);
      stop_tracing ();
      if (detach_inferior (pid) != 0)
	write_enn (own_buf);
      else
	{
	  discard_queued_stop_replies (pid_to_ptid (pid));
	  write_ok (own_buf);

	  if (extended_protocol || target_running ())
	    {
	      /* There is still at least one inferior remaining or
		 we are in extended mode, so don't terminate gdbserver,
		 and instead treat this like a normal program exit.  */
	      last_status.kind = TARGET_WAITKIND_EXITED;
	      last_status.value.integer = 0;
	      last_ptid = pid_to_ptid (pid);

	      current_thread = NULL;
	    }
	  else
	    {
	      putpkt (own_buf);
	      remote_close ();

	      /* If we are attached, then we can exit.  Otherwise, we
		 need to hang around doing nothing, until the child is
		 gone.  */
	      join_inferior (pid);
	      exit (0);
	    }
	}
      break;
    case '!':
      extended_protocol = 1;
      write_ok (own_buf);
      break;
    case '?':
      handle_status (own_buf);
      break;
    case 'H':
      if (own_buf[1] == 'c' || own_buf[1] == 'g' || own_buf[1] == 's')
	{
	  ptid_t gdb_id, thread_id;
	  int pid;

	  require_running (own_buf);

	  gdb_id = read_ptid (&own_buf[2], NULL);

	  pid = ptid_get_pid (gdb_id);

	  if (ptid_equal (gdb_id, null_ptid)
	      || ptid_equal (gdb_id, minus_one_ptid))
	    thread_id = null_ptid;
	  else if (pid != 0
		   && ptid_equal (pid_to_ptid (pid),
				  gdb_id))
	    {
	      struct thread_info *thread =
		(struct thread_info *) find_inferior (&all_threads,
						      first_thread_of,
						      &pid);
	      if (!thread)
		{
		  write_enn (own_buf);
		  break;
		}

	      thread_id = thread->entry.id;
	    }
	  else
	    {
	      thread_id = gdb_id_to_thread_id (gdb_id);
	      if (ptid_equal (thread_id, null_ptid))
		{
		  write_enn (own_buf);
		  break;
		}
	    }

	  if (own_buf[1] == 'g')
	    {
	      if (ptid_equal (thread_id, null_ptid))
		{
		  /* GDB is telling us to choose any thread.  Check if
		     the currently selected thread is still valid. If
		     it is not, select the first available.  */
		  struct thread_info *thread =
		    (struct thread_info *) find_inferior_id (&all_threads,
							     general_thread);
		  if (thread == NULL)
		    thread = get_first_thread ();
		  thread_id = thread->entry.id;
		}

	      general_thread = thread_id;
	      set_desired_thread (1);
	      gdb_assert (current_thread != NULL);
	    }
	  else if (own_buf[1] == 'c')
	    cont_thread = thread_id;

	  write_ok (own_buf);
	}
      else
	{
	  /* Silently ignore it so that gdb can extend the protocol
	     without compatibility headaches.  */
	  own_buf[0] = '\0';
	}
      break;
    case 'g':
      require_running (own_buf);
      if (current_traceframe >= 0)
	{
	  struct regcache *regcache
	    = new_register_cache (current_target_desc ());

	  if (fetch_traceframe_registers (current_traceframe,
					  regcache, -1) == 0)
	    registers_to_string (regcache, own_buf);
	  else
	    write_enn (own_buf);
	  free_register_cache (regcache);
	}
      else
	{
	  struct regcache *regcache;

	  if (!set_desired_thread (1))
	    write_enn (own_buf);
	  else
	    {
	      regcache = get_thread_regcache (current_thread, 1);
	      registers_to_string (regcache, own_buf);
	    }
	}
      break;
    case 'G':
      require_running (own_buf);
      if (current_traceframe >= 0)
	write_enn (own_buf);
      else
	{
	  struct regcache *regcache;

	  if (!set_desired_thread (1))
	    write_enn (own_buf);
	  else
	    {
	      regcache = get_thread_regcache (current_thread, 1);
	      registers_from_string (regcache, &own_buf[1]);
	      write_ok (own_buf);
	    }
	}
      break;
    case 'm':
      require_running (own_buf);
      decode_m_packet (&own_buf[1], &mem_addr, &len);
      res = gdb_read_memory (mem_addr, mem_buf, len);
      if (res < 0)
	write_enn (own_buf);
      else
	bin2hex (mem_buf, own_buf, res);
      break;
    case 'M':
      require_running (own_buf);
      decode_M_packet (&own_buf[1], &mem_addr, &len, &mem_buf);
      if (gdb_write_memory (mem_addr, mem_buf, len) == 0)
	write_ok (own_buf);
      else
	write_enn (own_buf);
      break;
    case 'X':
      require_running (own_buf);
      if (decode_X_packet (&own_buf[1], packet_len - 1,
			   &mem_addr, &len, &mem_buf) < 0
	  || gdb_write_memory (mem_addr, mem_buf, len) != 0)
	write_enn (own_buf);
      else
	write_ok (own_buf);
      break;
    case 'C':
      require_running (own_buf);
      hex2bin (own_buf + 1, &sig, 1);
      if (gdb_signal_to_host_p ((enum gdb_signal) sig))
	signal = gdb_signal_to_host ((enum gdb_signal) sig);
      else
	signal = 0;
      myresume (own_buf, 0, signal);
      break;
    case 'S':
      require_running (own_buf);
      hex2bin (own_buf + 1, &sig, 1);
      if (gdb_signal_to_host_p ((enum gdb_signal) sig))
	signal = gdb_signal_to_host ((enum gdb_signal) sig);
      else
	signal = 0;
      myresume (own_buf, 1, signal);
      break;
    case 'c':
      require_running (own_buf);
      signal = 0;
      myresume (own_buf, 0, signal);
      break;
    case 's':
      require_running (own_buf);
      signal = 0;
      myresume (own_buf, 1, signal);
      break;
    case 'Z':  /* insert_ ... */
      /* Fallthrough.  */
    case 'z':  /* remove_ ... */
      {
	char *dataptr;
	ULONGEST addr;
	int kind;
	char type = own_buf[1];
	int res;
	const int insert = ch == 'Z';
	char *p = &own_buf[3];

	p = unpack_varlen_hex (p, &addr);
	kind = strtol (p + 1, &dataptr, 16);

	if (insert)
	  {
	    struct breakpoint *bp;

	    bp = set_gdb_breakpoint (type, addr, kind, &res);
	    if (bp != NULL)
	      {
		res = 0;

		/* GDB may have sent us a list of *point parameters to
		   be evaluated on the target's side.  Read such list
		   here.  If we already have a list of parameters, GDB
		   is telling us to drop that list and use this one
		   instead.  */
		clear_breakpoint_conditions_and_commands (bp);
		process_point_options (bp, &dataptr);
	      }
	  }
	else
	  res = delete_gdb_breakpoint (type, addr, kind);

	if (res == 0)
	  write_ok (own_buf);
	else if (res == 1)
	  /* Unsupported.  */
	  own_buf[0] = '\0';
	else
	  write_enn (own_buf);
	break;
      }
    case 'k':
      response_needed = 0;
      if (!target_running ())
	/* The packet we received doesn't make sense - but we can't
	   reply to it, either.  */
	return 0;

      fprintf (stderr, "Killing all inferiors\n");
      for_each_inferior (&all_processes, kill_inferior_callback);

      /* When using the extended protocol, we wait with no program
	 running.  The traditional protocol will exit instead.  */
      if (extended_protocol)
	{
	  last_status.kind = TARGET_WAITKIND_EXITED;
	  last_status.value.sig = GDB_SIGNAL_KILL;
	  return 0;
	}
      else
	exit (0);

    case 'T':
      {
	ptid_t gdb_id, thread_id;

	require_running (own_buf);

	gdb_id = read_ptid (&own_buf[1], NULL);
	thread_id = gdb_id_to_thread_id (gdb_id);
	if (ptid_equal (thread_id, null_ptid))
	  {
	    write_enn (own_buf);
	    break;
	  }

	if (mythread_alive (thread_id))
	  write_ok (own_buf);
	else
	  write_enn (own_buf);
      }
      break;
    case 'R':
      response_needed = 0;

      /* Restarting the inferior is only supported in the extended
	 protocol.  */
      if (extended_protocol)
	{
	  if (target_running ())
	    for_each_inferior (&all_processes,
			       kill_inferior_callback);
	  fprintf (stderr, "GDBserver restarting\n");

	  /* Wait till we are at 1st instruction in prog.  */
	  if (program_argv != NULL)
	    {
	      start_inferior (program_argv);
	      if (last_status.kind == TARGET_WAITKIND_STOPPED)
		{
		  /* Stopped at the first instruction of the target
		     process.  */
		  general_thread = last_ptid;
		}
	      else
		{
		  /* Something went wrong.  */
		  general_thread = null_ptid;
		}
	    }
	  else
	    {
	      last_status.kind = TARGET_WAITKIND_EXITED;
	      last_status.value.sig = GDB_SIGNAL_KILL;
	    }
	  return 0;
	}
      else
	{
	  /* It is a request we don't understand.  Respond with an
	     empty packet so that gdb knows that we don't support this
	     request.  */
	  own_buf[0] = '\0';
	  break;
	}
    case 'v':
      /* Extended (long) request.  */
      handle_v_requests (own_buf, packet_len, &new_packet_len);
      break;

    default:
      /* It is a request we don't understand.  Respond with an empty
	 packet so that gdb knows that we don't support this
	 request.  */
      own_buf[0] = '\0';
      break;
    }

  if (new_packet_len != -1)
    putpkt_binary (own_buf, new_packet_len);
  else
    putpkt (own_buf);

  response_needed = 0;

  if (exit_requested)
    return -1;

  return 0;
}

/* Event-loop callback for serial events.  */

int
handle_serial_event (int err, gdb_client_data client_data)
{
  if (debug_threads)
    debug_printf ("handling possible serial event\n");

  /* Really handle it.  */
  if (process_serial_event () < 0)
    return -1;

  /* Be sure to not change the selected thread behind GDB's back.
     Important in the non-stop mode asynchronous protocol.  */
  set_desired_thread (1);

  return 0;
}

/* Push a stop notification on the notification queue.  */

static void
push_stop_notification (ptid_t ptid, struct target_waitstatus *status)
{
  struct vstop_notif *vstop_notif = XNEW (struct vstop_notif);

  vstop_notif->status = *status;
  vstop_notif->ptid = ptid;
  /* Push Stop notification.  */
  notif_push (&notif_stop, (struct notif_event *) vstop_notif);
}

/* Event-loop callback for target events.  */

int
handle_target_event (int err, gdb_client_data client_data)
{
  if (debug_threads)
    debug_printf ("handling possible target event\n");

  last_ptid = mywait (minus_one_ptid, &last_status,
		      TARGET_WNOHANG, 1);

  if (last_status.kind == TARGET_WAITKIND_NO_RESUMED)
    {
      if (gdb_connected () && report_no_resumed)
	push_stop_notification (null_ptid, &last_status);
    }
  else if (last_status.kind != TARGET_WAITKIND_IGNORE)
    {
      int pid = ptid_get_pid (last_ptid);
      struct process_info *process = find_process_pid (pid);
      int forward_event = !gdb_connected () || process->gdb_detached;

      if (last_status.kind == TARGET_WAITKIND_EXITED
	  || last_status.kind == TARGET_WAITKIND_SIGNALLED)
	{
	  mark_breakpoints_out (process);
	  mourn_inferior (process);
	}
      else if (last_status.kind == TARGET_WAITKIND_THREAD_EXITED)
	;
      else
	{
	  /* We're reporting this thread as stopped.  Update its
	     "want-stopped" state to what the client wants, until it
	     gets a new resume action.  */
	  current_thread->last_resume_kind = resume_stop;
	  current_thread->last_status = last_status;
	}

      if (forward_event)
	{
	  if (!target_running ())
	    {
	      /* The last process exited.  We're done.  */
	      exit (0);
	    }

	  if (last_status.kind == TARGET_WAITKIND_EXITED
	      || last_status.kind == TARGET_WAITKIND_SIGNALLED
	      || last_status.kind == TARGET_WAITKIND_THREAD_EXITED)
	    ;
	  else
	    {
	      /* A thread stopped with a signal, but gdb isn't
		 connected to handle it.  Pass it down to the
		 inferior, as if it wasn't being traced.  */
	      struct thread_resume resume_info;

	      if (debug_threads)
		debug_printf ("GDB not connected; forwarding event %d for"
			      " [%s]\n",
			      (int) last_status.kind,
			      target_pid_to_str (last_ptid));

	      resume_info.thread = last_ptid;
	      resume_info.kind = resume_continue;
	      if (last_status.kind == TARGET_WAITKIND_STOPPED)
		resume_info.sig = gdb_signal_to_host (last_status.value.sig);
	      else
		resume_info.sig = 0;
	      (*the_target->resume) (&resume_info, 1);
	    }
	}
      else
	push_stop_notification (last_ptid, &last_status);
    }

  /* Be sure to not change the selected thread behind GDB's back.
     Important in the non-stop mode asynchronous protocol.  */
  set_desired_thread (1);

  return 0;
}