2019-05-11  Joel Brobecker  <brobecker@adacore.com>

	* version.in: Set GDB version number to 8.3.

2019-05-08  Tom Tromey  <tromey@adacore.com>

	* utils.c (fputs_maybe_filtered): Reset style after paging, even
	when no wrap column is set.

2019-05-04  Tom Tromey  <tom@tromey.com>

	* psymtab.c (psymbol_name_matches, match_partial_symbol)
	(lookup_partial_symbol, print_partial_symbols)
	(recursively_search_psymtabs, sort_pst_symbols, psymbol_hash)
	(psymbol_compare): Update.
	(add_psymbol_to_bcache): Clear the entire psymbol.
	(maintenance_check_psymtabs): Update.
	* psympriv.h (struct partial_symbol): Don't derive from
	general_symbol_info.
	<obj_section, unrelocated_address, address,
	set_unrelocated_address>: Update.
	<ginfo>: New member.
	* dwarf-index-write.c (write_psymbols, debug_names::insert)
	(debug_names::write_psymbols): Update.

2019-05-03  Eli Zaretskii  <eliz@gnu.org>

	* windows-nat.c [_WIN32_WINNT]: Define _WIN32_WINNT to Windows XP
	level, so that various Windows header files expose the necessary
	declarations and definitions.

	* symfile.c (find_separate_debug_file): Remove colon from the
	drive spec of DOS/Windows file names of the target, so that the
	file name produced from DEBUGDIR and the target's directory will
	be valid on DOS/Windows systems.

2019-04-30  Joel Brobecker  <brobecker@adacore.com>

	* windows-nat.c (get_windows_debug_event) <EXIT_PROCESS_DEBUG_EVENT>:
	Use current_event.dwThreadId instead of main_thread_id.

2019-04-30  Tom Tromey  <tromey@adacore.com>

	PR c++/24470:
	* dwarf2read.c (process_structure_scope): Handle case where type
	has template parameters but no symbol was created.

2019-04-19  Sergei Trofimovich <siarheit@google.com>

	* configure.ac: add --enable-source-highlight switch.
	* configure: Regenerate.
	* top.c (print_gdb_version): plumb --enable-source-highlight
	status to "show configuration".

2019-04-19  Ilya Yu. Malakhov  <malakhov@mcst.ru>

	PR symtab/24423:
	* source.c (print_source_lines_base): Advance "iter" when a
	control character is seen.

2019-04-19  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* inferior.h (struct infcall_suspend_state_deleter):
	Catch exception in destructor to avoid crash.

2019-04-12  Eli Zaretskii  <eliz@gnu.org>

	* utils.c (prompt_for_continue): Don't restore the styling at the
	end, as applied_style has the wrong value.  This fixes styling in
	long lists of file names that are interrupted by the "Continue?"
	prompt.

2019-03-26  Joel Brobecker  <brobecker@adacore.com>

	* version.in: Set GDB version number to 8.2.91.DATE-git.

2019-03-26  Joel Brobecker  <brobecker@adacore.com>

	GDB 8.2.91 released.

2019-03-26  Joel Brobecker  <brobecker@adacore.com>

	* version.in: Set GDB version number to 8.2.91.

2019-03-20  Tom Tromey  <tromey@adacore.com>

	PR gdb/24391
	* infrun.c (handle_inferior_event): Rename from
	handle_inferior_event_1.  Create a scoped_value_mark.
	(handle_inferior_event): Remove.

2019-03-25  Simon Marchi  <simon.marchi@polymtl.ca>

	* source-cache.c (source_cache::get_source_lines): Re-read
	fullname after calling open_source_file.

2019-03-18  Pedro Alves  <palves@redhat.com>
	    Eli Zaretskii <eliz@gnu.org>

	* tui/tui-out.c (tui_ui_out::tui_ui_out): Fix initialization of
	m_line and m_start_of_line.

2019-03-18  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-io.c (gdb_wgetch): Don't echo CR.
	(tui_getc): When gdb_wgetch returns a CR, behave the same as when
	it returns a newline.  This fixes a regression in TU mode, whereby
	the next line is output on the same screen line as the user input.

2019-03-18  Pedro Alves  <palves@redhat.com>

	* tui/tui-io.c (reverse_mode_p, reverse_save_bg, reverse_save_fg):
	New globals.
	(apply_style): New, factored out from ...
	(apply_ansi_escape): ... this.  Handle reverse video mode.
	(tui_set_reverse_mode): New function.
	* tui/tui-io.h (tui_set_reverse_mode): New declaration.
	* tui/tui-winsource.c (tui_show_source_line): Use
	tui_set_reverse_mode instead of setting A_STANDOUT.
	* ui-style.h (struct ui_file_style) <set_reverse, set_fg, set_bg>:
	New setter methods.

2019-03-18  Hannes Domani  <ssbssa@yahoo.de>

	* tui/tui-source.c (copy_source_line): Fix handling of 'column'.
	Handle tabs.

2019-03-17  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-winsource.c (tui_set_is_exec_point_at): Call
	tui_refill_source_window instead of tui_refresh_win, to update the
	current execution line.  This fixes redisplay of the current line
	when stepping through the code with "next" or "step".

2019-03-16  Eli Zaretskii  <eliz@gnu.org>

	* source-cache.c (source_cache::get_source_lines): Call
	find_source_lines to initialize s->nlines.  This fixes vertical
	scrolling of TUI source window when the DOWN arrow is pressed.

2019-03-16  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-winsource.c (tui_show_source_line): Revert "Use
	wclrtoeol in tui_show_source_line".  This reverts changes made in
	commit 4a3045920bbe4e50a0f4920b0fdc4e88ef23015c.

2019-03-12  John Baldwin  <jhb@FreeBSD.org>

	* NEWS: Combine separate "New targets" sections for 8.3.

2019-03-14  Eli Zaretskii  <eliz@gnu.org>

	The MS-Windows port of ncurses fails to switch to a color pair if
	one or both of the colors are the implicit default colors.  This
	change records the default colors when TUI is initialized, and
	then specifies them explicitly when a color pair uses the default
	colors.  This allows color styling in TUI mode on MS-Windows.

	* tui/tui-io.c [__MINGW32__]: Include windows.h.  Declare
	ncurses_norm_attr.
	(tui_initialize_io) [__MINGW32__]: Record the default terminal
	colors in ncurses_norm_attr.
	(apply_ansi_escape) [__MINGW32__]: If a color in a color pair is
	"none", replace it with the default color recorded in
	ncurses_norm_attr.

2019-03-14  Tom Tromey  <tromey@adacore.com>

	* source-cache.h (class source_cache) <get_source_lines>: Return
	std::string.
	* source-cache.c (source_cache::extract_lines): Handle case where
	first_pos==npos.  Return std::string.
	(source_cache::get_source_lines): Update.

2019-03-14  Tom Tromey  <tromey@adacore.com>

	* NEWS: Add item for "style sources" commands.
	* source-cache.c (source_cache::get_source_lines): Check
	source_styling.
	* cli/cli-style.c (source_styling): New global.
	(_initialize_cli_style): Add "style sources" commands.
	(show_style_sources): New function.
	* cli/cli-style.h (source_styling): Declare.

2019-03-14  Pedro Alves  <palves@redhat.com>
	    Tom Tromey  <tromey@adacore.com>

	* tui/tui-winsource.h (tui_refill_source_window): Declare.
	* tui/tui-winsource.c (tui_refill_source_window): New function,
	from...
	(tui_horizontal_source_scroll): ... here.  Move some logic.
	* cli/cli-style.c (set_style_enabled): Notify new observable.
	* tui/tui-hooks.c (tui_redisplay_source): New function.
	(tui_attach_detach_observers): Attach or detach
	tui_redisplay_source.
	* observable.h (source_styling_changed): New observable.
	* observable.c: Define source_styling_changed observable.

2019-03-12  Eli Zaretskii  <eliz@gnu.org>

	PR/24325
	* source-cache.c: #undef open and close, to avoid unresolved
	externals during linking.

2019-03-08  Eli Zaretskii  <eliz@gnu.org>

	Support styling on native MS-Windows console

	PR/24315
	* utils.c (can_emit_style_escape) [_WIN32]: Don't disable styling
	on MS-Windows if $TERM is not defined.

	* cli/cli-style.c: Set cli_styling to 1 in the MinGW build.

	* posix-hdep.c (gdb_console_fputs):
	* mingw-hdep.c (rgb_to_16colors, gdb_console_fputs): New
	functions.
	* ui-file.h (gdb_console_fputs): Add prototype.

	* ui-file.c (stdio_file::puts): Call gdb_console_fputs, and fall
	back to fputs only if the former returns zero.

2019-03-07  Brian Vandenberg  <phantall@gmail.com>
	    Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR gdb/8527
	* procfs.c (proc_wait_for_stop): Wrap write of PCWSTOP in
	set_sigint_trap, clear_sigint_trap.

2019-03-02  Eli Zaretskii  <eliz@gnu.org>

	* xml-syscall.c (xml_list_syscalls_by_group): Drop 'struct' from
	for-loop range, to avoid compiler warnings.

	* tui/tui.c (tui_enable) [__MINGW32__]: Don't declare 'cap', to
	avoid compiler warnings about unused variables.

2019-03-02  Eli Zaretskii  <eliz@gnu.org>

	* NEWS: Mention end of support for native debugging on MS-Windows
	before XP.

2019-03-02  Eli Zaretskii  <eliz@gnu.org>

	PR gdb/24292
	* common/netstuff.c:
	* gdbserver/gdbreplay.c
	* gdbserver/remote-utils.c:
	* ser-tcp.c:
	* unittests/parse-connection-spec-selftests.c [USE_WIN32API]:
	Include ws2tcpip.h instead of wsiapi.h and winsock2.h.  Redefine
	_WIN32_WINNT to 0x0501 if defined to a smaller value, as
	'getaddrinfo' and 'freeaddrinfo' were not available before
	Windows XP, and mingw.org's MinGW headers by default define
	_WIN32_WINNT to 0x500.

2019-02-27  Kevin Buettner  <kevinb@redhat.com>
    
	* NEWS: Note minimum Python version.

2019-02-27  Joel Brobecker  <brobecker@adacore.com>

	* version.in: Set GDB version number to 8.2.90.DATE-git.

2019-02-27  Joel Brobecker  <brobecker@adacore.com>

	GDB 8.2.90 released.

2019-02-27  Joel Brobecker  <brobecker@adacore.com>

	* version.in: Set GDB version number to 8.2.90.

2019-02-27  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Change "Changes since GDB 8.2" into "Changes in GDB 8.3".

2019-02-27  Joel Brobecker  <brobecker@adacore.com>

	GDB 8.3 branch created (143420fb0d5ae54323ba9953f0818c194635228d):
	* version.in: Bump version to 8.2.90.DATE-git.

2019-02-26  Simon Marchi  <simon.marchi@efficios.com>

	* aix-thread.c (ptid_cmp): Remove unused variable.
	(get_signaled_thread): Likewise.
	(store_regs_user_thread): Likewise.
	(store_regs_kernel_thread): Likewise.
	(fetch_regs_kernel_thread): Remove shadowed variable.

2019-02-26  Andrew Burgess  <andrew.burgess@embecosm.com>

	* features/riscv/32bit-cpu.xml: Add register numbers.
	* features/riscv/32bit-fpu.c: Regenerate.
	* features/riscv/32bit-fpu.xml: Add register numbers.
	* features/riscv/64bit-cpu.xml: Add register numbers.
	* features/riscv/64bit-fpu.c: Regenerate.
	* features/riscv/64bit-fpu.xml: Add register numbers.

2019-02-26  Kevin Buettner  <kevinb@redhat.com>

	* NEWS: Mention two argument form of gdb.Value constructor.
	* python/py-value.c (convert_buffer_and_type_to_value): New
	function.
	(valpy_new): Parse arguments via gdb_PyArg_ParseTupleAndKeywords.
	Add support for handling an optional second argument.  Call
	convert_buffer_and_type_to_value as appropriate.
	* python/python-internal.h (Py_buffer_deleter): New struct.
	(Py_buffer_up): New typedef.

2019-02-25  John Baldwin  <jhb@FreeBSD.org>

	* dwarf2read.c (dwarf2_get_dwz_file): Reset dwz_bfd to nullptr
	instead of releasing ownership.

2019-02-25  Jordan Rupprecht  <rupprecht@google.com>

	* dwarf2read.c (open_and_init_dwp_file): Call
	elf_numsections instead of bfd_count_sections to initialize
	dwp_file->num_sections.

2019-02-25  Tom Tromey  <tromey@adacore.com>

	* solib-darwin.c (darwin_get_dyld_bfd): Don't release dyld_bfd.

2019-02-23  Sergio Durigan Junior  <sergiodj@redhat.com>

	* gcore.in: Add '--readnever' option when invoking GDB.

2019-02-22  Simon Marchi  <simon.marchi@polymtl.ca>

	* MAINTAINERS: Update my email address.

2019-02-22  Simon Marchi  <simon.marchi@polymtl.ca>

	* build-id.c (build_id_to_debug_bfd_1): New function.
	(build_id_to_debug_bfd): Look for separate debug file in
	sysroot.

2019-02-22  Andrew Burgess  <andrew.burgess@embecosm.com>

	* gdbarch.sh: Update the copyright year range that is placed into
	generated files.

2019-02-22  Keith Seitz  <keiths@redhat.com>

	PR symtab/23853
	* linespec.c (create_sals_line_offset): Search for the default
	symtab's filename instead of its fullname.

2019-02-21  Alan Hayward  <alan.hayward@arm.com>

	* NEWS: Update style defaults.

2019-02-21  Alan Hayward  <alan.hayward@arm.com>

	* main.c (captured_main_1): Disable styling in batch mode.

2019-02-20  Tom Tromey  <tom@tromey.com>

	* symtab.c (symtab_symbol_info): Fix typos.

2019-02-20  Tom Tromey  <tromey@adacore.com>

	* findcmd.c (_initialize_mem_search): Use upper case for
	metasyntactic variables.

2019-02-20  Alan Hayward  <alan.hayward@arm.com>

	* aarch64-tdep.c (aarch64_add_reggroups): New function.
	(aarch64_gdbarch_init): Call aarch64_add_reggroups.

2019-02-19  Simon Marchi  <simon.marchi@polymtl.ca>

	* top.h (source_file_name): Change to std::string.
	* top.c (source_file_name): Likewise.
	(command_line_input): Adjust.
	* cli/cli-script.c (script_from_file): Adjust.

2019-02-19  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c
	(ravenscar_thread_target::update_thread_list): Don't call
	ada_build_task_list.
	* ada-lang.h (ada_build_task_list): Don't declare.
	* ada-tasks.c (struct ada_tasks_inferior_data)
	<task_list_valid_p>: Now bool.
	(read_known_tasks, ada_task_list_changed)
	(ada_tasks_invalidate_inferior_data): Update.
	(read_known_tasks_array): Return bool.
	(read_known_tasks_list): Likewise.
	(read_known_tasks): Return void.
	(ada_build_task_list): Now static.

2019-02-18  Andrew Burgess  <andrew.burgess@embecosm.com>

	* gdbtypes.c (type_align): Allow alignment of TYPE_CODE_METHODPTR
	and TYPE_CODE_MEMBERPTR to be overridden by the gdbarch.

2019-02-18  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* ada-task.c (_initialize_tasks): Use 'with_cleanup' register
	variant for ada_tasks_pspace_data_handle and
	ada_tasks_inferior_data_handle.
	(ada_tasks_pspace_data_cleanup): New function.
	(ada_tasks_inferior_data_cleanup): New function.

2019-02-17  Tom Tromey  <tom@tromey.com>

	* macrotab.h (macro_source_fullname): Return a std::string.
	* macrotab.c (macro_include, check_for_redefinition)
	(macro_undef, macro_lookup_definition, foreach_macro)
	(foreach_macro_in_scope): Update.
	(macro_source_fullname): Return a std::string.
	* macrocmd.c (show_pp_source_pos): Update.

2019-02-17  Tom Tromey  <tom@tromey.com>

	* macrocmd.c (show_pp_source_pos): Style the file names.

2019-02-17  Tom Tromey  <tom@tromey.com>

	PR tui/24197:
	* tui/tui-source.c (tui_set_source_content_nil): Rewrite.

2019-02-17  Tom Tromey  <tom@tromey.com>

	* ada-lang.c (user_select_syms): Use filtered printing.
	* utils.c (wrap_style): New global.
	(desired_style): Remove.
	(emit_style_escape): Add stream parameter.
	(set_output_style, reset_terminal_style, prompt_for_continue):
	Update.
	(flush_wrap_buffer): Only flush gdb_stdout.
	(wrap_here): Set wrap_style.
	(fputs_maybe_filtered): Clear the wrap buffer on exception.  Don't
	treat escape sequences as a character.  Change when wrap buffer is
	flushed.
	(fputs_styled): Do not set the output style when the default is
	requested.
	* ui-style.h (struct ui_file_style) <is_default>: New method.
	* source.c (print_source_lines_base): Emit escape sequences in one
	piece.

2019-02-17  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.c (type_align): Handle TYPE_CODE_RANGE the same as
	integers and enumeration types.

2019-02-17  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (standard_lookup): Use ada_lookup_encoded_symbol
	instead of lookup_symbol_in_language
	(do_exact_match): New function.
	(ada_get_symbol_name_matcher): Return do_exact_match when
	doing a verbatim match.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c (ravenscar_thread_target::resume)
	(ravenscar_thread_target::wait): Special case wildcard requests.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c (base_ptid): Remove.
	(struct ravenscar_thread_target) <close>: New method.
	<m_base_ptid>: New member.
	<update_inferior_ptid, active_task, task_is_currently_active,
	runtime_initialized>: Declare methods.
	<ravenscar_thread_target>: Add constructor.
	(ravenscar_thread_target::task_is_currently_active)
	(ravenscar_thread_target::update_inferior_ptid)
	(ravenscar_runtime_initialized): Rename.  Now methods.
	(ravenscar_thread_target::resume, ravenscar_thread_target::wait)
	(ravenscar_thread_target::update_thread_list): Update.
	(ravenscar_thread_target::active_task): Now method.
	(ravenscar_thread_target::store_registers)
	(ravenscar_thread_target::prepare_to_store)
	(ravenscar_thread_target::prepare_to_store)
	(ravenscar_thread_target::mourn_inferior): Update.
	(ravenscar_inferior_created): Use "new" to create target.
	(ravenscar_thread_target::get_ada_task_ptid): Update.
	(_initialize_ravenscar): Don't initialize base_ptid.
	(ravenscar_ops): Remove global.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* target.h (push_target): Declare new overload.
	* target.c (push_target): New overload, taking an rvalue reference.
	* remote.c (remote_target::open_1): Use push_target overload.
	* corelow.c (core_target_open): Use push_target overload.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c (is_ravenscar_task)
	(ravenscar_task_is_currently_active): Return bool.
	(ravenscar_update_inferior_ptid, get_running_thread_msymbol)
	(_initialize_ravenscar): Remove "(void)".
	(has_ravenscar_runtime, ravenscar_runtime_initialized): Likewise.
	Return bool.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c (ravenscar_runtime_initializer)
	(has_ravenscar_runtime, get_running_thread_id)
	(ravenscar_thread_target::resume): Fix indentation.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* sparc-ravenscar-thread.c (struct sparc_ravenscar_ops): Derive
	from ravenscar_arch_ops.
	(sparc_ravenscar_ops::fetch_registers)
	(sparc_ravenscar_ops::store_registers): Now methods.
	(sparc_ravenscar_prepare_to_store): Remove.
	(sparc_ravenscar_ops): Redefine.
	* ravenscar-thread.h (struct ravenscar_arch_ops): Add virtual
	methods and destructor.  Remove members.
	* ravenscar-thread.c (ravenscar_thread_target::fetch_registers)
	(ravenscar_thread_target::store_registers)
	(ravenscar_thread_target::prepare_to_store): Update.
	* ppc-ravenscar-thread.c (ppc_ravenscar_generic_prepare_to_store):
	Remove.
	(struct ppc_ravenscar_powerpc_ops): Derive from
	ravenscar_arch_ops.
	(ppc_ravenscar_powerpc_ops::fetch_registers)
	(ppc_ravenscar_powerpc_ops::store_registers): Now methods.
	(ppc_ravenscar_powerpc_ops): Redefine.
	(struct ppc_ravenscar_e500_ops): Derive from ravenscar_arch_ops.
	(ppc_ravenscar_e500_ops::fetch_registers)
	(ppc_ravenscar_e500_ops::store_registers): Now methods.
	(ppc_ravenscar_e500_ops): Redefine.
	* aarch64-ravenscar-thread.c
	(aarch64_ravenscar_generic_prepare_to_store): Remove.
	(struct aarch64_ravenscar_ops): Derive from ravenscar_arch_ops.
	(aarch64_ravenscar_fetch_registers)
	(aarch64_ravenscar_store_registers): Now methods.
	(aarch64_ravenscar_ops): Redefine.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c (ravenscar_thread_target::stopped_by_sw_breakpoint)
	(ravenscar_thread_target::stopped_by_hw_breakpoint)
	(ravenscar_thread_target::stopped_by_watchpoint)
	(ravenscar_thread_target::stopped_data_address)
	(ravenscar_thread_target::core_of_thread): Use scoped_restore.

2019-02-15  Tom Tromey  <tromey@adacore.com>

	* ravenscar-thread.c: Fix some typos.

2019-02-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>
	    Tom Tromey  <tromey@adacore.com>

	* ada-lang.c (ada_exception_sal): Change addr_string to a
	std::string.
	(create_ada_exception_catchpoint): Update.

2019-02-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>
	    Tom Tromey  <tromey@adacore.com>

	* breakpoint.c (~bp_location): Rename from bp_location_dtor.
	(bp_location_ops): Remove.
	(base_breakpoint_allocate_location): Update.
	(free_bp_location): Update.
	* ada-lang.c (class ada_catchpoint_location)
	<ada_catchpoint_location>: Remove ops parameter.
	(ada_catchpoint_location_dtor): Remove.
	(ada_catchpoint_location_ops): Remove.
	(allocate_location_exception): Update.
	* breakpoint.h (struct bp_location_ops): Remove.
	(class bp_location) <bp_location>: Remove bp_location_ops
	parameter.
	<~bp_location>: Add destructor.
	<ops>: Remove.

2019-02-14  Thomas Schwinge  <thomas@codesourcery.com>
	    Pedro Alves  <palves@redhat.com>

	* remote.c (remote_target::remote_parse_stop_reply): Avoid using
	'PATH_MAX'.

2019-02-14  David Michael  <fedora.dm0@gmail.com>
	    Samuel Thibault  <samuel.thibault@gnu.org>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* gnu-nat.c (S_proc_getmsgport_reply, S_proc_task2proc_reply)
	(S_proc_pid2proc_reply): Adjust to Hurd "proc" interface changes.

2019-02-14  Thomas Schwinge  <thomas@codesourcery.com>

	* gnu-nat.c (gnu_write_inferior, parse_int_arg, _parse_bool_arg)
	(check_empty): Use "const char *".

	* gnu-nat.c (gnu_nat_target::detach): Instead of
	'detach_inferior (pid)' call
	'detach_inferior (find_inferior_pid (pid))'.

	* configure.nat [gdb_host == i386gnu] (NATDEPFILES): Add
	'nat/fork-inferior.o'.
	* gnu-nat.c: #include "nat/fork-inferior.h".

	* gnu-nat.c (gnu_nat_target::detach): Instead of
	'inf_child_maybe_unpush_target (ops)' call 'maybe_unpush_target'.
	* gnu-nat.h: #include "inf-child.h".
	* i386-gnu-nat.c (gnu_fetch_registers): Rename/move to
	'i386_gnu_nat_target::fetch_registers'.
	(gnu_store_registers): Rename/move to
	'i386_gnu_nat_target::store_registers'.

	* config/i386/nm-i386gnu.h: Don't "#include" any files.
	* gnu-nat.h (mach_thread_info): New function.
	* gnu-nat.c (thread_takeover_sc_cmd): Use it.

	* config/i386/nm-i386gnu.h (gnu_target_pid_to_str): Remove.

2019-02-14  Frederic Konrad  <konrad@adacore.com>

	* riscv-rdep.c (riscv_type_alignment): Handle TYPE_CODE_RANGE.

2019-02-14  Joel Brobecker  <brobecker@adacore.com>

	* windows-nat.c (windows_add_thread): Add new parameter
	"main_thread_p" with default value set to false.  Update
	function documentation as well as all callers.
	(windows_delete_thread): Likewise.
	(fake_create_process): Update call to windows_add_thread.
	(get_windows_debug_event) <CREATE_THREAD_DEBUG_EVENT>
	<CREATE_PROCESS_DEBUG_EVENT>: Likewise.
	<EXIT_THREAD_DEBUG_EVENT, EXIT_PROCESS_DEBUG_EVENT>: Update
	call to windows_delete_thread.

2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>

	* MAINTAINERS: Add Andrew Burgess as global maintainer.

2019-02-12  John Baldwin  <jhb@FreeBSD.org>

	* symfile.c (find_separate_debug_file): Use canonical path of
	sysroot with child_path instead of gdb_sysroot if it is valid.

2019-02-12  John Baldwin  <jhb@FreeBSD.org>

	* symfile.c (find_separate_debug_file): Use child_path to
	determine if an object file is under a sysroot.

2019-02-12  John Baldwin  <jhb@FreeBSD.org>

	* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
	unittests/child-path-selftests.c.
	* common/pathstuff.c (child_path): New function.
	* common/pathstuff.h (child_path): New prototype.
	* unittests/child-path-selftests.c: New file.

2019-02-12  John Baldwin  <jhb@FreeBSD.org>

	* symfile.c (find_separate_debug_file): Look for separate debug
	files in debug directories under the sysroot.

2019-02-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* symtab.h (struct minimal_symbol data_p): New const method.
	(struct minimal_symbol text_p): Likewise.
	* symtab.c (output_source_filename): Use file name style
	to print file name.
	(print_symbol_info): Likewise.
	(print_msymbol_info): Use address style to print addresses.
	Use function name style to print executable text symbols.
	(expand_symtab_containing_pc): Use data_p.
	(find_pc_sect_compunit_symtab): Likewise.

2019-02-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* breakpoint.c (describe_other_breakpoints): Use address style
	to print addresses.
	(say_where): Likewise.

2019-02-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* ada-typeprint.c (print_func_type): Print function name
	style to print function name.
	* c-typeprint.c (c_print_type_1): Likewise.

2019-02-11  Alan Hayward  <alan.hayward@arm.com>

	* aarch64-linux-tdep.c (aarch64_linux_get_syscall_number): Check
	for execve.

2019-02-10  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* c-exp.y (direct_abs_decl): Use emplace_back to record the
	type_stack.

2019-02-10  Joel Brobecker  <brobecker@adacore.com>

	* ada-varobj.c (ada_value_is_changeable_p): Add handling of
	TYPE_CODE_REF types.

2019-02-08  Jim Wilson  <jimw@sifive.com>

	* riscv-linux-tdep.c (riscv_linux_fregmap): New.
	(riscv_linux_fregset): New.
	(riscv_linux_iterate_over_regset_sections): Call cb for .reg2 section.

2019-02-07  Tom Tromey  <tom@tromey.com>

	* thread.c (thread_cancel_execution_command): Update.
	* thread-fsm.h (struct thread_fsm): Add constructor, destructor,
	methods.
	(struct thread_fsm_ops): Remove.
	(thread_fsm_ctor, thread_fsm_delete, thread_fsm_clean_up)
	(thread_fsm_should_stop, thread_fsm_return_value)
	(thread_fsm_set_finished, thread_fsm_finished_p)
	(thread_fsm_async_reply_reason, thread_fsm_should_notify_stop):
	Don't declare.
	* mi/mi-interp.c (mi_on_normal_stop_1): Update.
	* infrun.c (clear_proceed_status_thread)
	(clean_up_just_stopped_threads_fsms, fetch_inferior_event)
	(print_stop_event): Update.
	* infcmd.c (struct step_command_fsm): Inherit from thread_fsm.
	Add constructor.
	(step_command_fsm_ops): Remove.
	(new_step_command_fsm): Remove.
	(step_1): Update.
	(step_command_fsm::should_stop): Rename from
	step_command_fsm_should_stop.
	(step_command_fsm::clean_up): Rename from
	step_command_fsm_clean_up.
	(step_command_fsm::do_async_reply_reason): Rename from
	step_command_fsm_async_reply_reason.
	(struct until_next_fsm): Inherit from thread_fsm.  Add
	constructor.
	(until_next_fsm_ops): Remove.
	(new_until_next_fsm): Remove.
	(until_next_fsm::should_stop): Rename from
	until_next_fsm_should_stop.
	(until_next_fsm::clean_up): Rename from until_next_fsm_clean_up.
	(until_next_fsm::do_async_reply_reason): Rename from
	until_next_fsm_async_reply_reason.
	(struct finish_command_fsm): Inherit from thread_fsm.  Add
	constructor.  Change type of breakpoint.
	(finish_command_fsm_ops): Remove.
	(new_finish_command_fsm): Remove.
	(finish_command_fsm::should_stop): Rename from
	finish_command_fsm_should_stop.
	(finish_command_fsm::clean_up): Rename from
	finish_command_fsm_clean_up.
	(finish_command_fsm::return_value): Rename from
	finish_command_fsm_return_value.
	(finish_command_fsm::do_async_reply_reason): Rename from
	finish_command_fsm_async_reply_reason.
	(finish_command): Update.
	* infcall.c (struct call_thread_fsm): Inherit from thread_fsm.
	Add constructor.
	(call_thread_fsm_ops): Remove.
	(call_thread_fsm::call_thread_fsm): Rename from
	new_call_thread_fsm.
	(call_thread_fsm::should_stop): Rename from
	call_thread_fsm_should_stop.
	(call_thread_fsm::should_notify_stop): Rename from
	call_thread_fsm_should_notify_stop.
	(run_inferior_call, call_function_by_hand_dummy): Update.
	* cli/cli-interp.c (should_print_stop_to_console): Update.
	* breakpoint.c (struct until_break_fsm): Inherit from thread_fsm.
	Add constructor.  Change type of location_breakpoint,
	caller_breakpoint.
	(until_break_fsm_ops): Remove.
	(new_until_break_fsm): Remove.
	(until_break_fsm::should_stop): Rename from
	until_break_fsm_should_stop.
	(until_break_fsm::clean_up): Rename from
	until_break_fsm_clean_up.
	(until_break_fsm::do_async_reply_reason): Rename from
	until_break_fsm_async_reply_reason.
	(until_break_command): Update.
	* thread-fsm.c: Remove.
	* Makefile.in (COMMON_SFILES): Remove thread-fsm.c.

2019-02-07  Tom Tromey  <tom@tromey.com>

	* yy-remap.h: Add include guard.
	* xtensa-tdep.h: Add include guard.
	* xcoffread.h: Rename include guard.
	* varobj-iter.h: Add include guard.
	* tui/tui.h: Rename include guard.
	* tui/tui-winsource.h: Rename include guard.
	* tui/tui-wingeneral.h: Rename include guard.
	* tui/tui-windata.h: Rename include guard.
	* tui/tui-win.h: Rename include guard.
	* tui/tui-stack.h: Rename include guard.
	* tui/tui-source.h: Rename include guard.
	* tui/tui-regs.h: Rename include guard.
	* tui/tui-out.h: Rename include guard.
	* tui/tui-layout.h: Rename include guard.
	* tui/tui-io.h: Rename include guard.
	* tui/tui-hooks.h: Rename include guard.
	* tui/tui-file.h: Rename include guard.
	* tui/tui-disasm.h: Rename include guard.
	* tui/tui-data.h: Rename include guard.
	* tui/tui-command.h: Rename include guard.
	* tic6x-tdep.h: Add include guard.
	* target/waitstatus.h: Rename include guard.
	* target/wait.h: Rename include guard.
	* target/target.h: Rename include guard.
	* target/resume.h: Rename include guard.
	* target-float.h: Rename include guard.
	* stabsread.h: Add include guard.
	* rs6000-tdep.h: Add include guard.
	* riscv-fbsd-tdep.h: Add include guard.
	* regformats/regdef.h: Rename include guard.
	* record.h: Rename include guard.
	* python/python.h: Rename include guard.
	* python/python-internal.h: Rename include guard.
	* python/py-stopevent.h: Rename include guard.
	* python/py-ref.h: Rename include guard.
	* python/py-record.h: Rename include guard.
	* python/py-record-full.h: Rename include guard.
	* python/py-record-btrace.h: Rename include guard.
	* python/py-instruction.h: Rename include guard.
	* python/py-events.h: Rename include guard.
	* python/py-event.h: Rename include guard.
	* procfs.h: Add include guard.
	* proc-utils.h: Add include guard.
	* p-lang.h: Add include guard.
	* or1k-tdep.h: Rename include guard.
	* observable.h: Rename include guard.
	* nto-tdep.h: Rename include guard.
	* nat/x86-linux.h: Rename include guard.
	* nat/x86-linux-dregs.h: Rename include guard.
	* nat/x86-gcc-cpuid.h: Add include guard.
	* nat/x86-dregs.h: Rename include guard.
	* nat/x86-cpuid.h: Rename include guard.
	* nat/ppc-linux.h: Rename include guard.
	* nat/mips-linux-watch.h: Rename include guard.
	* nat/linux-waitpid.h: Rename include guard.
	* nat/linux-ptrace.h: Rename include guard.
	* nat/linux-procfs.h: Rename include guard.
	* nat/linux-osdata.h: Rename include guard.
	* nat/linux-nat.h: Rename include guard.
	* nat/linux-namespaces.h: Rename include guard.
	* nat/linux-btrace.h: Rename include guard.
	* nat/glibc_thread_db.h: Rename include guard.
	* nat/gdb_thread_db.h: Rename include guard.
	* nat/gdb_ptrace.h: Rename include guard.
	* nat/fork-inferior.h: Rename include guard.
	* nat/amd64-linux-siginfo.h: Rename include guard.
	* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
	* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
	* nat/aarch64-linux.h: Rename include guard.
	* nat/aarch64-linux-hw-point.h: Rename include guard.
	* mn10300-tdep.h: Add include guard.
	* mips-linux-tdep.h: Add include guard.
	* mi/mi-parse.h: Rename include guard.
	* mi/mi-out.h: Rename include guard.
	* mi/mi-main.h: Rename include guard.
	* mi/mi-interp.h: Rename include guard.
	* mi/mi-getopt.h: Rename include guard.
	* mi/mi-console.h: Rename include guard.
	* mi/mi-common.h: Rename include guard.
	* mi/mi-cmds.h: Rename include guard.
	* mi/mi-cmd-break.h: Rename include guard.
	* m2-lang.h: Add include guard.
	* location.h: Rename include guard.
	* linux-record.h: Rename include guard.
	* linux-nat.h: Add include guard.
	* linux-fork.h: Add include guard.
	* i386-darwin-tdep.h: Rename include guard.
	* hppa-linux-offsets.h: Add include guard.
	* guile/guile.h: Rename include guard.
	* guile/guile-internal.h: Rename include guard.
	* gnu-nat.h: Rename include guard.
	* gdb-stabs.h: Rename include guard.
	* frv-tdep.h: Add include guard.
	* f-lang.h: Add include guard.
	* event-loop.h: Add include guard.
	* darwin-nat.h: Rename include guard.
	* cp-abi.h: Rename include guard.
	* config/sparc/nm-sol2.h: Rename include guard.
	* config/nm-nto.h: Rename include guard.
	* config/nm-linux.h: Add include guard.
	* config/i386/nm-i386gnu.h: Rename include guard.
	* config/djgpp/nl_types.h: Rename include guard.
	* config/djgpp/langinfo.h: Rename include guard.
	* compile/gcc-cp-plugin.h: Add include guard.
	* compile/gcc-c-plugin.h: Add include guard.
	* compile/compile.h: Rename include guard.
	* compile/compile-object-run.h: Rename include guard.
	* compile/compile-object-load.h: Rename include guard.
	* compile/compile-internal.h: Rename include guard.
	* compile/compile-cplus.h: Rename include guard.
	* compile/compile-c.h: Rename include guard.
	* common/xml-utils.h: Rename include guard.
	* common/x86-xstate.h: Rename include guard.
	* common/version.h: Rename include guard.
	* common/vec.h: Rename include guard.
	* common/tdesc.h: Rename include guard.
	* common/selftest.h: Rename include guard.
	* common/scoped_restore.h: Rename include guard.
	* common/scoped_mmap.h: Rename include guard.
	* common/scoped_fd.h: Rename include guard.
	* common/safe-iterator.h: Rename include guard.
	* common/run-time-clock.h: Rename include guard.
	* common/refcounted-object.h: Rename include guard.
	* common/queue.h: Rename include guard.
	* common/ptid.h: Rename include guard.
	* common/print-utils.h: Rename include guard.
	* common/preprocessor.h: Rename include guard.
	* common/pathstuff.h: Rename include guard.
	* common/observable.h: Rename include guard.
	* common/netstuff.h: Rename include guard.
	* common/job-control.h: Rename include guard.
	* common/host-defs.h: Rename include guard.
	* common/gdb_wait.h: Rename include guard.
	* common/gdb_vecs.h: Rename include guard.
	* common/gdb_unlinker.h: Rename include guard.
	* common/gdb_unique_ptr.h: Rename include guard.
	* common/gdb_tilde_expand.h: Rename include guard.
	* common/gdb_sys_time.h: Rename include guard.
	* common/gdb_string_view.h: Rename include guard.
	* common/gdb_splay_tree.h: Rename include guard.
	* common/gdb_setjmp.h: Rename include guard.
	* common/gdb_ref_ptr.h: Rename include guard.
	* common/gdb_optional.h: Rename include guard.
	* common/gdb_locale.h: Rename include guard.
	* common/gdb_assert.h: Rename include guard.
	* common/filtered-iterator.h: Rename include guard.
	* common/filestuff.h: Rename include guard.
	* common/fileio.h: Rename include guard.
	* common/environ.h: Rename include guard.
	* common/common-utils.h: Rename include guard.
	* common/common-types.h: Rename include guard.
	* common/common-regcache.h: Rename include guard.
	* common/common-inferior.h: Rename include guard.
	* common/common-gdbthread.h: Rename include guard.
	* common/common-exceptions.h: Rename include guard.
	* common/common-defs.h: Rename include guard.
	* common/common-debug.h: Rename include guard.
	* common/cleanups.h: Rename include guard.
	* common/buffer.h: Rename include guard.
	* common/btrace-common.h: Rename include guard.
	* common/break-common.h: Rename include guard.
	* cli/cli-utils.h: Rename include guard.
	* cli/cli-style.h: Rename include guard.
	* cli/cli-setshow.h: Rename include guard.
	* cli/cli-script.h: Rename include guard.
	* cli/cli-interp.h: Rename include guard.
	* cli/cli-decode.h: Rename include guard.
	* cli/cli-cmds.h: Rename include guard.
	* charset-list.h: Add include guard.
	* buildsym-legacy.h: Rename include guard.
	* bfin-tdep.h: Add include guard.
	* ax.h: Rename include guard.
	* arm-linux-tdep.h: Add include guard.
	* arm-fbsd-tdep.h: Add include guard.
	* arch/xtensa.h: Rename include guard.
	* arch/tic6x.h: Add include guard.
	* arch/i386.h: Add include guard.
	* arch/arm.h: Rename include guard.
	* arch/arm-linux.h: Rename include guard.
	* arch/arm-get-next-pcs.h: Rename include guard.
	* arch/amd64.h: Add include guard.
	* arch/aarch64-insn.h: Rename include guard.
	* arch-utils.h: Rename include guard.
	* annotate.h: Add include guard.
	* amd64-darwin-tdep.h: Rename include guard.
	* aarch64-linux-tdep.h: Add include guard.
	* aarch64-fbsd-tdep.h: Add include guard.
	* aarch32-linux-nat.h: Add include guard.

2019-02-06  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* macrotab.c (macro_define_internal): New function that
	factorizes macro_define_object_internal and macro_define_function
	code.
	(macro_define_object_internal): Use macro_define_internal.
	(macro_define_function): Likewise.

2019-02-06  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* macrocmd.c (extract_identifier): Return
	a gdb::unique_xmalloc_ptr<char> instead of a char *, and update
	callers.

2019-02-06  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c (fbsd_fetch_cmdline): Join arguments with spaces.

2019-02-05  Tom Tromey  <tom@tromey.com>

	* target.c (target_stack::unpush): Move assertion earlier.

2019-01-30  Tom Tromey  <tom@tromey.com>

	PR python/23615:
	* python/python.c (execute_gdb_command): Use gdbpy_allow_threads.
	(gdbpy_parse_and_eval): Likewise.
	* python/python-internal.h (gdbpy_allow_threads): New class.

2019-01-28  John Baldwin  <jhb@FreeBSD.org>

	* aarch64-fbsd-tdep.c (aarch64_fbsd_gregmap)
	(aarch64_fbsd_fpregmap): Move earlier.
	(AARCH64_MCONTEXT_REG_SIZE, AARCH64_MCONTEXT_FPREG_SIZE): Delete.
	(aarch64_fbsd_sigframe_init): Use trad_frame_set_reg_regmap
	instead of individual calls to trad_frame_set_reg_addr.
	* arm-fbsd-tdep.c (arm_fbsd_gregmap, arm_fbsd_vfpregmap): Move
	earlier.
	(ARM_MCONTEXT_REG_SIZE, ARM_MCONTEXT_VFP_REG_SIZE): Delete.
	(arm_fbsd_sigframe_init): Use trad_frame_set_reg_regmap
	instead of individual calls to trad_frame_set_reg_addr.

2019-01-28  Alan Hayward  <alan.hayward@arm.com>

	* CONTRIBUTE: Replace contribution list with wiki link.

2019-01-25  Tom Tromey  <tom@tromey.com>

	* Makefile.in (GDB_CFLAGS): Don't add -I for common.

2019-01-25  Tom Tromey  <tom@tromey.com>

	* xtensa-linux-nat.c: Fix common/ includes.
	* xml-support.h: Fix common/ includes.
	* xml-support.c: Fix common/ includes.
	* x86-linux-nat.c: Fix common/ includes.
	* windows-nat.c: Fix common/ includes.
	* varobj.h: Fix common/ includes.
	* varobj.c: Fix common/ includes.
	* value.c: Fix common/ includes.
	* valops.c: Fix common/ includes.
	* utils.c: Fix common/ includes.
	* unittests/xml-utils-selftests.c: Fix common/ includes.
	* unittests/utils-selftests.c: Fix common/ includes.
	* unittests/unpack-selftests.c: Fix common/ includes.
	* unittests/tracepoint-selftests.c: Fix common/ includes.
	* unittests/style-selftests.c: Fix common/ includes.
	* unittests/string_view-selftests.c: Fix common/ includes.
	* unittests/scoped_restore-selftests.c: Fix common/ includes.
	* unittests/scoped_mmap-selftests.c: Fix common/ includes.
	* unittests/scoped_fd-selftests.c: Fix common/ includes.
	* unittests/rsp-low-selftests.c: Fix common/ includes.
	* unittests/parse-connection-spec-selftests.c: Fix common/
	includes.
	* unittests/optional-selftests.c: Fix common/ includes.
	* unittests/offset-type-selftests.c: Fix common/ includes.
	* unittests/observable-selftests.c: Fix common/ includes.
	* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
	* unittests/memrange-selftests.c: Fix common/ includes.
	* unittests/memory-map-selftests.c: Fix common/ includes.
	* unittests/lookup_name_info-selftests.c: Fix common/ includes.
	* unittests/function-view-selftests.c: Fix common/ includes.
	* unittests/environ-selftests.c: Fix common/ includes.
	* unittests/copy_bitwise-selftests.c: Fix common/ includes.
	* unittests/common-utils-selftests.c: Fix common/ includes.
	* unittests/cli-utils-selftests.c: Fix common/ includes.
	* unittests/array-view-selftests.c: Fix common/ includes.
	* ui-file.c: Fix common/ includes.
	* tui/tui-io.c: Fix common/ includes.
	* tracepoint.h: Fix common/ includes.
	* tracepoint.c: Fix common/ includes.
	* tracefile-tfile.c: Fix common/ includes.
	* top.h: Fix common/ includes.
	* top.c: Fix common/ includes.
	* thread.c: Fix common/ includes.
	* target/waitstatus.h: Fix common/ includes.
	* target/waitstatus.c: Fix common/ includes.
	* target.h: Fix common/ includes.
	* target.c: Fix common/ includes.
	* target-memory.c: Fix common/ includes.
	* target-descriptions.c: Fix common/ includes.
	* symtab.h: Fix common/ includes.
	* symfile.c: Fix common/ includes.
	* stap-probe.c: Fix common/ includes.
	* spu-linux-nat.c: Fix common/ includes.
	* sparc-nat.c: Fix common/ includes.
	* source.c: Fix common/ includes.
	* solib.c: Fix common/ includes.
	* solib-target.c: Fix common/ includes.
	* ser-unix.c: Fix common/ includes.
	* ser-tcp.c: Fix common/ includes.
	* ser-pipe.c: Fix common/ includes.
	* ser-base.c: Fix common/ includes.
	* selftest-arch.c: Fix common/ includes.
	* s12z-tdep.c: Fix common/ includes.
	* rust-exp.y: Fix common/ includes.
	* rs6000-aix-tdep.c: Fix common/ includes.
	* riscv-tdep.c: Fix common/ includes.
	* remote.c: Fix common/ includes.
	* remote-notif.h: Fix common/ includes.
	* remote-fileio.h: Fix common/ includes.
	* remote-fileio.c: Fix common/ includes.
	* regcache.h: Fix common/ includes.
	* regcache.c: Fix common/ includes.
	* record-btrace.c: Fix common/ includes.
	* python/python.c: Fix common/ includes.
	* python/py-type.c: Fix common/ includes.
	* python/py-inferior.c: Fix common/ includes.
	* progspace.h: Fix common/ includes.
	* producer.c: Fix common/ includes.
	* procfs.c: Fix common/ includes.
	* proc-api.c: Fix common/ includes.
	* printcmd.c: Fix common/ includes.
	* ppc-linux-nat.c: Fix common/ includes.
	* parser-defs.h: Fix common/ includes.
	* osdata.c: Fix common/ includes.
	* obsd-nat.c: Fix common/ includes.
	* nat/x86-linux.c: Fix common/ includes.
	* nat/x86-linux-dregs.c: Fix common/ includes.
	* nat/x86-dregs.h: Fix common/ includes.
	* nat/x86-dregs.c: Fix common/ includes.
	* nat/ppc-linux.c: Fix common/ includes.
	* nat/mips-linux-watch.h: Fix common/ includes.
	* nat/mips-linux-watch.c: Fix common/ includes.
	* nat/linux-waitpid.c: Fix common/ includes.
	* nat/linux-ptrace.h: Fix common/ includes.
	* nat/linux-ptrace.c: Fix common/ includes.
	* nat/linux-procfs.c: Fix common/ includes.
	* nat/linux-personality.c: Fix common/ includes.
	* nat/linux-osdata.c: Fix common/ includes.
	* nat/linux-namespaces.c: Fix common/ includes.
	* nat/linux-btrace.h: Fix common/ includes.
	* nat/linux-btrace.c: Fix common/ includes.
	* nat/fork-inferior.c: Fix common/ includes.
	* nat/amd64-linux-siginfo.c: Fix common/ includes.
	* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
	* nat/aarch64-linux.c: Fix common/ includes.
	* nat/aarch64-linux-hw-point.h: Fix common/ includes.
	* nat/aarch64-linux-hw-point.c: Fix common/ includes.
	* namespace.h: Fix common/ includes.
	* mips-linux-tdep.c: Fix common/ includes.
	* minsyms.c: Fix common/ includes.
	* mi/mi-parse.h: Fix common/ includes.
	* mi/mi-main.c: Fix common/ includes.
	* mi/mi-cmd-env.c: Fix common/ includes.
	* memrange.h: Fix common/ includes.
	* memattr.c: Fix common/ includes.
	* maint.h: Fix common/ includes.
	* maint.c: Fix common/ includes.
	* main.c: Fix common/ includes.
	* machoread.c: Fix common/ includes.
	* location.c: Fix common/ includes.
	* linux-thread-db.c: Fix common/ includes.
	* linux-nat.c: Fix common/ includes.
	* linux-fork.c: Fix common/ includes.
	* inline-frame.c: Fix common/ includes.
	* infrun.c: Fix common/ includes.
	* inflow.c: Fix common/ includes.
	* inferior.h: Fix common/ includes.
	* inferior.c: Fix common/ includes.
	* infcmd.c: Fix common/ includes.
	* inf-ptrace.c: Fix common/ includes.
	* inf-child.c: Fix common/ includes.
	* ia64-linux-nat.c: Fix common/ includes.
	* i387-tdep.c: Fix common/ includes.
	* i386-tdep.c: Fix common/ includes.
	* i386-linux-tdep.c: Fix common/ includes.
	* i386-linux-nat.c: Fix common/ includes.
	* i386-go32-tdep.c: Fix common/ includes.
	* i386-fbsd-tdep.c: Fix common/ includes.
	* i386-fbsd-nat.c: Fix common/ includes.
	* guile/scm-type.c: Fix common/ includes.
	* guile/guile.c: Fix common/ includes.
	* go32-nat.c: Fix common/ includes.
	* gnu-nat.c: Fix common/ includes.
	* gdbthread.h: Fix common/ includes.
	* gdbarch-selftests.c: Fix common/ includes.
	* gdb_usleep.c: Fix common/ includes.
	* gdb_select.h: Fix common/ includes.
	* gdb_bfd.c: Fix common/ includes.
	* gcore.c: Fix common/ includes.
	* fork-child.c: Fix common/ includes.
	* findvar.c: Fix common/ includes.
	* fbsd-nat.c: Fix common/ includes.
	* event-top.c: Fix common/ includes.
	* event-loop.c: Fix common/ includes.
	* dwarf2read.c: Fix common/ includes.
	* dwarf2loc.c: Fix common/ includes.
	* dwarf2-frame.c: Fix common/ includes.
	* dwarf-index-cache.c: Fix common/ includes.
	* dtrace-probe.c: Fix common/ includes.
	* disasm-selftests.c: Fix common/ includes.
	* defs.h: Fix common/ includes.
	* csky-tdep.c: Fix common/ includes.
	* cp-valprint.c: Fix common/ includes.
	* cp-support.h: Fix common/ includes.
	* cp-support.c: Fix common/ includes.
	* corelow.c: Fix common/ includes.
	* completer.h: Fix common/ includes.
	* completer.c: Fix common/ includes.
	* compile/compile.c: Fix common/ includes.
	* compile/compile-loc2c.c: Fix common/ includes.
	* compile/compile-cplus-types.c: Fix common/ includes.
	* compile/compile-cplus-symbols.c: Fix common/ includes.
	* command.h: Fix common/ includes.
	* cli/cli-dump.c: Fix common/ includes.
	* cli/cli-cmds.c: Fix common/ includes.
	* charset.c: Fix common/ includes.
	* build-id.c: Fix common/ includes.
	* btrace.h: Fix common/ includes.
	* btrace.c: Fix common/ includes.
	* breakpoint.h: Fix common/ includes.
	* breakpoint.c: Fix common/ includes.
	* ax.h: 
	(enum agent_op): Fix common/ includes.
	* ax-general.c (struct aop_map): Fix common/ includes.
	* ax-gdb.c: Fix common/ includes.
	* auxv.c: Fix common/ includes.
	* auto-load.c: Fix common/ includes.
	* arm-tdep.c: Fix common/ includes.
	* arch/riscv.c: Fix common/ includes.
	* arch/ppc-linux-common.c: Fix common/ includes.
	* arch/i386.c: Fix common/ includes.
	* arch/arm.c: Fix common/ includes.
	* arch/arm-linux.c: Fix common/ includes.
	* arch/arm-get-next-pcs.c: Fix common/ includes.
	* arch/amd64.c: Fix common/ includes.
	* arch/aarch64.c: Fix common/ includes.
	* arch/aarch64-insn.c: Fix common/ includes.
	* arch-utils.c: Fix common/ includes.
	* amd64-windows-tdep.c: Fix common/ includes.
	* amd64-tdep.c: Fix common/ includes.
	* amd64-sol2-tdep.c: Fix common/ includes.
	* amd64-obsd-tdep.c: Fix common/ includes.
	* amd64-nbsd-tdep.c: Fix common/ includes.
	* amd64-linux-tdep.c: Fix common/ includes.
	* amd64-linux-nat.c: Fix common/ includes.
	* amd64-fbsd-tdep.c: Fix common/ includes.
	* amd64-fbsd-nat.c: Fix common/ includes.
	* amd64-dicos-tdep.c: Fix common/ includes.
	* amd64-darwin-tdep.c: Fix common/ includes.
	* agent.c: Fix common/ includes.
	* ada-lang.h: Fix common/ includes.
	* ada-lang.c: Fix common/ includes.
	* aarch64-tdep.c: Fix common/ includes.

2019-01-25  Tom Tromey  <tom@tromey.com>

	* common/create-version.sh: Use common/version.h.

2019-01-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (signal_stop, signal_print, signal_program)
	(signal_catch, signal_pass): Now arrays instead of pointers.
	(update_signals_program_target, do_target_resume)
	(signal_catch_update, handle_command, _initialize_infrun): Adjust.
	* linux-nat.c (linux_nat_target::pass_signals)
	(linux_nat_target::create_inferior, linux_nat_target::attach):
	Adjust.
	* linux-nat.h (linux_nat_target::pass_signals): Adjust.
	* nto-procfs.c (nto_procfs_target::pass_signals): Adjust.
	* procfs.c (procfs_target::pass_signals): Adjust.
	* record-full.c (record_full_target::resume): Adjust.
	* remote.c (remote_target::pass_signals)
	(remote_target::program_signals): Adjust.
	* target-debug.h (target_debug_print_signals): Now takes a
	gdb::array_view as parameter.  Adjust.
	* target.h (target_ops) <pass_signals, program_signals>: Replace
	pointer and length parameters with gdb::array_view.
	(target_pass_signals, target_program_signals): Likewise.
	* target-delegates.c: Regenerate.

2019-01-24  Pedro Alves  <palves@redhat.com>

	* common/forward-scope-exit.h
	(forward_scope_exit::forward_scope_exit): Pass arguments to
	m_bind_function directly, instead of creating a std::bind and
	copying that.

2019-01-24  Alan Hayward  <alan.hayward@arm.com>

	* aarch64-tdep.c (aapcs_is_vfp_call_or_return_candidate_1): Check
	for static members.
	(pass_in_v_vfp_candidate): Likewise.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* regcache.c (class regcache_invalidator): Remove.
	(regcache::raw_write): Use make_scope_exit.

2019-01-23  Tom Tromey  <tom@tromey.com>

	* ui-out.h (class ui_out_emit_type): Update comment.

2019-01-23  Tom Tromey  <tom@tromey.com>

	* infrun.c (fetch_inferior_event): Update comment.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* infrun.c (reinstall_readline_callback_handler_cleanup): Remove
	parameter.
	(fetch_inferior_event): Use SCOPE_EXIT.


2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* infrun.c (disable_thread_events): Delete.
	(stop_all_threads): Use SCOPE_EXIT.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* symfile.c: Include forward-scope-exit.h.
	(clear_symtab_users_cleanup): Replace forward declaration with
	a FORWARD_SCOPE_EXIT.
	(syms_from_objfile_1): Use the forward_scope_exit and
	gdb::optional instead of cleanup_function.
	(reread_symbols): Use the forward_scope_exit instead of
	cleanup_function.
	(clear_symtab_users_cleanup): Remove function.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* linux-nat.c: Include scope-exit.h.
	(cleanup_target_stop): Remove.
	(linux_nat_target::static_tracepoint_markers_by_strid): Use
	SCOPE_EXIT.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* infcall.c (cleanup_delete_std_terminate_breakpoint): Remove.
	(call_function_by_hand_dummy): Use SCOPE_EXIT.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Andrew Burgess  <andrew.burgess@embecosm.com>
	    Pedro Alves  <palves@redhat.com>

	* infrun.c (fetch_inferior_event): Use scope_exit.
	* utils.h (make_bpstat_clear_actions_cleanup): Don't declare.
	* top.c (execute_command): Use scope_exit.
	* breakpoint.c (bpstat_do_actions): Use scope_exit.
	* utils.c (do_bpstat_clear_actions_cleanup)
	(make_bpstat_clear_actions_cleanup): Remove.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* infrun.c: Include "common/scope-exit.h"
	(delete_just_stopped_threads_infrun_breakpoints_cleanup): Remove.
	(wait_for_inferior): Use SCOPE_EXIT.
	(fetch_inferior_event): Use scope_exit.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Pedro Alves  <palves@redhat.com>

	* breakpoint.c (create_breakpoint): Remove cleanup.

2019-01-23  Tom Tromey  <tom@tromey.com>
	    Andrew Burgess  <andrew.burgess@embecosm.com>
	    Pedro Alves  <palves@redhat.com>

2019-01-23  Pedro Alves  <palves@redhat.com>

	* gdbarch-selftests.c (struct on_exit): Use SCOPE_EXIT.

2019-01-23  Pedro Alves  <palves@redhat.com>
	    Andrew Burgess  <andrew.burgess@embecosm.com>

	* gdbthread.h: Include "common/forward-scope-exit.h".
	(scoped_finish_thread_state): Redefine custom class in terms of
	forward_scope_exit.

2019-01-23  Pedro Alves  <palves@redhat.com>
	    Andrew Burgess  <andrew.burgess@embecosm.com>

	* common/forward-scope-exit.h: New file.

2019-01-23  Pedro Alves  <palves@redhat.com>
	    Andrew Burgess  <andrew.burgess@embecosm.com>
	    Tom Tromey  <tom@tromey.com>

	* common/scope-exit.h: New file.

2019-01-23  Pedro Alves  <palves@redhat.com>

	* common/preprocessor.h (ESC): Rename to ...
	(ESC_PARENS): ... this.
	* common/valid-expr.h (CHECK_VALID_EXPR_1, CHECK_VALID_EXPR_2)
	(CHECK_VALID_EXPR_3, CHECK_VALID_EXPR_4): Adjust.

2019-01-23  Tom Tromey  <tom@tromey.com>

	* language.h (class scoped_switch_to_sym_language_if_auto):
	Initialize m_lang in both cases.

2019-01-23  Alan Hayward  <alan.hayward@arm.com>

	* nat/aarch64-linux.c (aarch64_linux_new_thread): Replace XNEW
	with XCNEW.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* corelow.c: Do not include sys/file.h.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* tui/tui-wingeneral.h: Include gdb_curses.h.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* source-cache.h (class source_cache) <get_source_lines,
	get_plain_source_lines, extract_lines>: Rename "lines" parameter.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* remote-fileio.h (struct remote_target): Declare.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* python/py-arch.c: Do not include py-ref.h.
	* python/py-bpevent.c: Do not include py-ref.h.
	* python/py-cmd.c: Do not include py-ref.h.
	* python/py-continueevent.c: Do not include py-ref.h.
	* python/py-event.h: Do not include py-ref.h.
	* python/py-evtregistry.c: Do not include py-ref.h.
	* python/py-finishbreakpoint.c: Do not include py-ref.h.
	* python/py-frame.c: Do not include py-ref.h.
	* python/py-framefilter.c: Do not include py-ref.h.
	* python/py-function.c: Do not include py-ref.h.
	* python/py-infevents.c: Do not include py-ref.h.
	* python/py-linetable.c: Do not include py-ref.h.
	* python/py-objfile.c: Do not include py-ref.h.
	* python/py-param.c: Do not include py-ref.h.
	* python/py-prettyprint.c: Do not include py-ref.h.
	* python/py-progspace.c: Do not include py-ref.h.
	* python/py-symbol.c: Do not include py-ref.h.
	* python/py-symtab.c: Do not include py-ref.h.
	* python/py-type.c: Do not include py-ref.h.
	* python/py-unwind.c: Do not include py-ref.h.
	* python/py-utils.c: Do not include py-ref.h.
	* python/py-value.c: Do not include py-ref.h.
	* python/py-varobj.c: Do not include py-ref.h.
	* python/py-xmethods.c: Do not include py-ref.h.
	* python/python.c: Do not include py-ref.h.
	* varobj.c: Do not include py-ref.h.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* objfiles.h (struct objfile_per_bfd_storage): Use "struct"
	keyword for bcache.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* compile/compile-cplus-types.c: Remove a comment by #include.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* compile/gcc-c-plugin.h: Include compile-internal.h.

2019-01-22  Tom Tromey  <tom@tromey.com>

	* stabsread.c (EXTERN): Do not define.
	(symnum, next_symbol_text_func, processing_gcc_compilation)
	(within_function, global_sym_chain, global_stabs)
	(previous_stab_code, this_object_header_files)
	(n_this_object_header_files)
	(n_allocated_this_object_header_files): Define.
	* stabsread.h (EXTERN): Never define.  Use "extern".

2019-01-22  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* event-top.c (handle_line_of_input): use unique_xmalloc_ptr for
	history_value.

2019-01-21  Tom Tromey  <tom@tromey.com>

	* ui-out.c: Fix includes.
	* tui/tui-source.c: Fix includes.
	* target.c: Fix includes.
	* remote.c: Fix includes.
	* regcache.c: Fix includes.
	* python/py-block.c: Fix includes.
	* printcmd.c: Fix includes.
	* or1k-tdep.c: Fix includes.
	* mi/mi-main.c: Fix includes.
	* m32r-tdep.c: Fix includes.
	* csky-tdep.c: Fix includes.
	* compile/compile-cplus-types.c: Fix includes.
	* cli/cli-interp.c: Fix includes.

2019-01-21  Alan Hayward  <alan.hayward@arm.com>

	* aarch64-tdep.c (aapcs_is_vfp_call_or_return_candidate_1): Check
	for padding.

2019-01-16  Tom Tromey  <tom@tromey.com>

	* objfiles.h (struct minimal_symbol_iterator): Rename.  Move
	earlier.
	(struct objfile) <msymbols_range>: Move from top level.
	<msymbols>: New method.
	(class objfile_msymbols): Remove.
	* symtab.c (default_collect_symbol_completion_matches_break_on):
	Update.
	* symmisc.c (dump_msymbols): Update.
	* stabsread.c (scan_file_globals): Update.
	* objc-lang.c (info_selectors_command, info_classes_command)
	(find_methods): Update.
	* minsyms.c (find_solib_trampoline_target): Update.
	* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Update.
	* coffread.c (coff_symfile_read): Update.
	* ada-lang.c (ada_lookup_simple_minsym)
	(ada_collect_symbol_completion_matches): Update.

2019-01-16  Tom Tromey  <tom@tromey.com>

	* objfiles.h (class objfile_msymbols) <iterator>: Change argument
	type.  Remove no-argument constructor.
	<iterator::operator++>: Simplify.
	<begin>: Update.
	<end>: Use minimal_symbol_count.

2019-01-16  Tom Tromey  <tom@tromey.com>

	* objfiles.h (struct objfile) <psymtabs>: New method.
	(class objfile_psymtabs): Remove.
	* psymtab.h (class psymtab_storage) <partial_symtab_range>: New
	typedef.
	<range>: New method.
	(require_partial_symbols): Change return type.
	* psymtab.c (require_partial_symbols)
	(psym_expand_symtabs_matching): Update.
	* mdebugread.c (parse_partial_symbols): Update.
	* dbxread.c (dbx_end_psymtab): Update.

2019-01-15  Tom Tromey  <tom@tromey.com>

	* symtab.c (lookup_objfile_from_block)
	(lookup_symbol_in_objfile_symtabs)
	(basic_lookup_transparent_type_1, find_pc_sect_compunit_symtab)
	(find_line_symtab, info_sources_command)
	(default_collect_symbol_completion_matches_break_on)
	(make_source_files_completion_list): Update.
	* symmisc.c (print_objfile_statistics, dump_objfile)
	(maintenance_print_symbols, maintenance_info_symtabs)
	(maintenance_check_symtabs, maintenance_info_line_tables):
	Update.
	* source.c (select_source_symtab)
	(forget_cached_source_info_for_objfile): Update.
	* objfiles.h (class objfile_compunits): Remove.
	(struct objfile) <compunits_range>: New typedef.
	(compunits): New method.
	* objfiles.c (objfile_relocate1): Update.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update.
	* maint.c (count_symtabs_and_blocks): Update.
	* linespec.c (iterate_over_all_matching_symtabs): Update.
	* cp-support.c (add_symbol_overload_list_qualified): Update.
	* coffread.c (coff_symtab_read): Update.
	* ada-lang.c (add_nonlocal_symbols)
	(ada_collect_symbol_completion_matches)
	(ada_add_global_exceptions): Update.

2019-01-15  Tom Tromey  <tom@tromey.com>

	* progspace.h (program_space) <objfiles_safe_range>: New
	typedef.
	<objfiles_safe>: New method.
	* objfiles.h (class all_objfiles_safe): Remove.
	* objfiles.c (free_all_objfiles, objfile_purge_solibs): Update.
	* jit.c (jit_inferior_exit_hook): Update.

2019-01-17  Tom Tromey  <tom@tromey.com>

	* progspace.h (program_space) <objfiles_range>: New typedef.
	<objfiles>: New method.
	<objfiles_head>: Rename from objfiles.
	(object_files): Update.
	* guile/scm-progspace.c (gdbscm_progspace_objfiles): Update.
	* guile/scm-pretty-print.c
	(ppscm_find_pretty_printer_from_objfiles): Update.
	* guile/scm-objfile.c (gdbscm_objfiles): Update.
	* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers):
	Update.
	* python/py-progspace.c (pspy_get_objfiles): Update.
	* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
	Update.
	* python/py-objfile.c (objfpy_lookup_objfile_by_name)
	(objfpy_lookup_objfile_by_build_id): Update.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update.
	* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
	Update.
	* symtab.c (iterate_over_symtabs, matching_obj_sections)
	(expand_symtab_containing_pc, lookup_objfile_from_block)
	(lookup_static_symbol, basic_lookup_transparent_type)
	(find_pc_sect_compunit_symtab, find_symbol_at_address)
	(find_line_symtab, info_sources_command)
	(default_collect_symbol_completion_matches_break_on)
	(make_source_files_completion_list, find_main_name): Update.
	* symmisc.c (print_symbol_bcache_statistics)
	(print_objfile_statistics, maintenance_print_symbols)
	(maintenance_print_msymbols, maintenance_print_objfiles)
	(maintenance_info_symtabs, maintenance_check_symtabs)
	(maintenance_expand_symtabs, maintenance_info_line_tables):
	Update.
	* symfile.c (remove_symbol_file_command, overlay_invalidate_all)
	(find_pc_overlay, find_pc_mapped_section, list_overlays_command)
	(map_overlay_command, unmap_overlay_command)
	(simple_overlay_update, expand_symtabs_matching)
	(map_symbol_filenames): Update.
	* symfile-debug.c (set_debug_symfile): Update.
	* spu-tdep.c (spu_overlay_update, spu_objfile_from_frame):
	Update.
	* source.c (select_source_symtab, forget_cached_source_info):
	Update.
	* solib.c (solib_read_symbols): Update.
	* solib-spu.c (append_ocl_sos): Update.
	* psymtab.c (maintenance_print_psymbols)
	(maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
	* probe.c (parse_probes_in_pspace, find_probe_by_pc): Update.
	* printcmd.c (info_symbol_command): Update.
	* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created):
	Update.
	* objfiles.h (class all_objfiles): Remove.
	* objfiles.c (have_partial_symbols, have_full_symbols)
	(have_minimal_symbols, qsort_cmp, update_section_map)
	(shared_objfile_contains_address_p)
	(default_iterate_over_objfiles_in_search_order): Update.
	* objc-lang.c (info_selectors_command, info_classes_command)
	(find_methods): Update.
	* minsyms.c (find_solib_trampoline_target): Update.
	* maint.c (maintenance_info_sections)
	(maintenance_translate_address, count_symtabs_and_blocks):
	Update.
	* main.c (captured_main_1): Update.
	* linux-thread-db.c (try_thread_db_load_from_pdir)
	(has_libpthread): Update.
	* linespec.c (iterate_over_all_matching_symtabs)
	(search_minsyms_for_name): Update.
	* jit.c (jit_find_objf_with_entry_addr): Update.
	* hppa-tdep.c (find_unwind_entry)
	(hppa_lookup_stub_minimal_symbol): Update.
	* gcore.c (gcore_create_callback, objfile_find_memory_regions):
	Update.
	* elfread.c (elf_gnu_ifunc_resolve_by_cache)
	(elf_gnu_ifunc_resolve_by_got): Update.
	* dwarf2-frame.c (dwarf2_frame_find_fde): Update.
	* dwarf-index-write.c (save_gdb_index_command): Update.
	* cp-support.c (add_symbol_overload_list_qualified): Update.
	* breakpoint.c (create_overlay_event_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint): Update.
	* blockframe.c (find_pc_partial_function): Update.
	* ada-lang.c (ada_lookup_simple_minsym, add_nonlocal_symbols)
	(ada_collect_symbol_completion_matches)
	(ada_add_global_exceptions): Update.

2019-01-17  Tom Tromey  <tom@tromey.com>

	* solib-target.c (lm_info_target_p): Remove typedef.  Don't
	declare VEC.
	(solib_target_parse_libraries): Change return type.
	(library_list_start_segment, library_list_start_section)
	(library_list_end_library, library_list_start_library); Update.
	(solib_target_free_library_list): Remove.
	(solib_target_parse_libraries): Remove cleanup.  Change return
	type.
	(solib_target_current_sos): Update.

2019-01-17  Tom Tromey  <tromey@bapiya>

	* valprint.c: Replace "the the" with "the".
	* symtab.c: Replace "the the" with "the".
	* solib.c: Replace "the the" with "the".
	* solib-dsbt.c: Replace "the the" with "the".
	* linespec.c: Replace "the the" with "the".
	* dwarf2loc.h: Replace "the the" with "the".
	* amd64-windows-tdep.c: Replace "the the" with "the".
	* aarch64-tdep.c: Replace "the the" with "the".

2019-01-16  Keith Seitz  <keiths@redhat.com>

	PR gdb/23773
	* dwarf2read.c (dwarf2_cu) <ancestor>: New field.
	<builder>: Rename to ..
	<m_builder>: ... this and make private.
	(dwarf2_cu::get_builder): New method.  Change all users of
	`builder' to use this method.
	(dwarf2_start_symtab): Move to ...
	(dwarf2_cu::start_symtab): ... here.  Update all callers
	(setup_type_unit_groups): Move to ...
	(dwarf2_cu::setup_type_unit_groups): ... here.  Update all
	callers.
	(dwarf2_cu::reset_builder): New method.
	(process_full_compunit, process_full_type_unit): Use
	dwarf2_cu::reset_builder.
	(follow_die_offset): Record the ancestor CU if it is different
	from the followed DIE's CU.
	(follow_die_sig_1): Likewise.

2019-01-15  Tom Tromey  <tom@tromey.com>

	* remote.c (class remote_state) <buf>: Now a char_vector.
	<buf_size>: Remove.
	(remote_target::getpkt): Change type of buf.  Remove sizeof_buf
	parameter.
	(remote_target::getpkt_or_notif_sane_1)
	(remote_target::getpkt_sane)
	(remote_target::getpkt_or_notif_sane): Likewise.
	(class remote_target) <putpkt>: New overload.
	(remote_target::read_frame): Change type of "buf_p".  Remove
	sizeof_p parameter.
	(packet_ok): New overload.
	(packet_check_result): New overload.
	Update all uses.

2019-01-14  Tom Tromey  <tom@tromey.com>

	* remote-notif.c (handle_notification, remote_notif_ack)
	(remote_notif_parse): Make "buf" const.
	* remote-notif.h (struct notif_client) <parse, ack>: Make "buf"
	const.
	(remote_notif_parse, remote_notif_ack, handle_notification):
	Likewise.
	* remote.c (remote_notif_stop_parse): Make "buf" const.
	(remote_target::remote_parse_stop_reply): Make "buf" const.
	(remote_notif_stop_ack): Make "buf" const.

2019-01-14  Tom Tromey  <tom@tromey.com>

	* remote.c (remote_console_output): Make parameter const.

2019-01-14  Tom Tromey  <tom@tromey.com>

	* target-debug.h (target_debug_print_signals): Constify.
	* nto-procfs.c (nto_procfs_target::pass_signals): Update.
	* procfs.c (procfs_target::pass_signals): Update.
	* linux-nat.c (linux_nat_target::pass_signals): Update.
	* linux-nat.h (class linux_nat_target) <pass_signals>: Update.
	* target-delegates.c: Rebuild.
	* remote.c (remote_target::program_signals): Update.
	(remote_target::pass_signals): Update.
	* target.c (target_pass_signals): Constify argument.
	(target_program_signals): Likewise.
	* target.h (struct target_ops) <pass_signals, program_signals>:
	Constify argument.
	(target_pass_signals, target_program_signals): Constify argument.

2019-01-14  Tom Tromey  <tom@tromey.com>

	PR tui/28819:
	* tui/tui-io.c (gdb_wgetch): Print \r when needed.

2019-01-14  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

	* ppc-tdep.h (struct gdbarch_tdep) <ppc_v0_alias_regnum>: New
	field.
	* rs6000-tdep.c: Include reggroups.h.
	(IS_V_ALIAS_PSEUDOREG): Define.
	(rs6000_register_name): Return names for the "vX" aliases.
	(rs6000_pseudo_register_type): Return type for the "vX" aliases.
	(rs6000_pseudo_register_reggroup_p): Restore.  Handle "vX"
	aliases.  Call default_register_reggroup_p for all other
	pseudo-registers.
	(v_alias_pseudo_register_read, v_alias_pseudo_register_write):
	New functions.
	(rs6000_pseudo_register_read, rs6000_pseudo_register_write):
	Handle "vX" aliases.
	(v_alias_pseudo_register_collect): New function.
	(rs6000_ax_pseudo_register_collect): Handle "vX" aliases.
	(rs6000_gdbarch_init): Initialize "vX" aliases as
	pseudo-registers.  Restore registration of
	rs6000_pseudo_register_reggroup_p with
	set_tdesc_pseudo_register_reggroup_p.

2019-01-13  Max Filippov  <jcmvbkbc@gmail.com>

	* xtensa-linux-tdep.c (xtensa_linux_init_abi): Update
	tdep->num_pseudo_regs. Add calls to set_gdbarch_num_regs and
	set_gdbarch_num_pseudo_regs.

2019-01-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* cli/cli-style.h (class cli_style_option): <add_setshow_commands>
	Remove arg prefixname, add do_set and do_show.
	Add member functions set_list and show_list.
	* cli/cli-style.c (class cli_style_option): Update accordingly.
	(style_set_list): Move to file scope.
	(style_show_list): Likewise.
	(set_style): Call help_list.
	(show_style): Call cmd_show_list.
	(_initialize_cli_style): New macro STYLE_ADD_SETSHOW_COMMANDS.
	Update to use the new macro.

2019-10-12  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (_initialize_ada_language): Expand the help text
	for the "catch exception" command.

2019-01-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* symtab.c (matching_obj_sections): Initialize obj,
	declare it closer to its usage.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* thread-iter.h (inf_threads_iterator): Use next_iterator.
	(basic_inf_threads_range): Remove.
	(inf_threads_range, inf_non_exited_threads_range)
	(safe_inf_threads_range): Use next_adapter.

2019-01-10  Keith Seitz  <keiths@redhat.com>

	PR gdb/23712
	PR symtab/23010
	* dwarf2read.c (dw2_add_symbol_to_list): Remove.
	(fixup_go_packaging, new_symbol): Use add_symbol_to_list.

2019-01-10  Keith Seitz  <keiths@redhat.com>

	PR gdb/23712
	PR symtab/23010
	* dictionary.c (pending_to_vector): Remove.
	(dict_create_hashed_1, dict_create_linear_1, dict_add_pending_1):
	Remove _1 suffix, replacing functions of the same name.  Update
	all callers.
	(dict_create_hashed, dict_create_hashed_expandable)
	(dict_create_linear, dict_create_linear_expandable, dict_free)
	(dict_add_symbol, dict_add_pending, dict_size, dict_empty):
	Make functions static.

2019-01-10  Keith Seitz  <keiths@redhat.com>

	PR gdb/23712
	PR symtab/23010
	* dictionary.h (struct dictionary): Replace declaration with
	multidictionary.
	(dict_create_hashed, dict_create_hashed_expandable)
	(dict_create_linear, dict_create_linear_expandable)
	(dict_free, dict_add_symbol, dict_add_pending, dict_empty)
	(dict_iterator_first, dict_iterator_next, dict_iter_match_first)
	(dict_iter_match_next, dict_size): Rename to "mdict_" versions
	taking multidictionary argument.
	[ALL_DICT_SYMBOLS]: Update for multidictionary.
	* block.h (struct block) <dict>: Change to multidictionary
	and rename `multidict'.
	* block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c,
	symmisc.c: Update all dictionary references to multidictionary.

2019-01-10  Keith Seitz  <keiths@redhat.com>

	PR gdb/23712
	PR symtab/23010
	* dictionary.c: Include unordered_map.
	(pending_to_vector): New function.
	(dict_create_hashed_1, dict_create_linear_1, dict_add_pending_1):
	Rewrite the non-"_1" functions to take vector instead
	of linked list.
	(dict_create_hashed, dict_create_linear, dict_add_pending): Use the
	"new" _1 versions of the same name.
	(multidictionary): Define.
	(std::hash<enum language): New definition.
	(collate_pending_symbols_by_language, mdict_create_hashed)
	(mdict_create_hashed_expandable, mdict_create_linear)
	(mdict_create_linear_expandable, mdict_free)
	(find_language_dictionary, create_new_language_dictionary)
	(mdict_add_symbol, mdict_add_pending, mdict_iterator_first)
	(mdict_iterator_next, mdict_iter_match_first, mdict_iter_match_next)
	(mdict_size, mdict_empty): New functions.
	* dictionary.h (mdict_iterator): Define.

2019-01-10  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (read_uploaded_action)
	(create_tracepoint_from_upload): Adjust to use
	gdb::unique_xmalloc_ptr.
	* ctf.c (ctf_write_uploaded_tp):
	(SET_ARRAY_FIELD): Use emplace_back.
	(SET_STRING_FIELD): Adjust to use gdb::unique_xmalloc_ptr.
	* tracefile-tfile.c (tfile_write_uploaded_tp):
	* tracepoint.c (parse_tracepoint_definition): Adjust to use
	gdb::unique_xmalloc_ptr.
	* tracepoint.h (struct uploaded_tp) <cond, actions, step_actions,
	at_string, cond_string, cmd_strings>: Replace char pointers
	with gdb::unique_xmalloc_ptr.

2019-01-10  Pedro Alves  <palves@redhat.com>

	* solib-target.c (library_list_start_library): Don't xstrdup name.

2019-01-10  Pedro Alves  <palves@redhat.com>

	* mdebugread.c (parse_partial_symbols): Use
	gdb::unique_xmalloc_ptr to manage heap-allocated 'stabsstring'.

2019-01-10  Andrew Burgess  <andrew.burgess@embecosm.com>

	* linux-fork.c (scoped_switch_fork_info)
	<~scoped_switch_fork_info>: Fix incorrect variable name.

2019-01-10  Andrew Burgess  <andrew.burgess@embecosm.com>

	* linux-fork.c (scoped_switch_fork_info)
	<scoped_switch_fork_info>: Make explicit.
	<~scoped_switch_fork_info>: Wrap core in TRY/CATCH.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* objfiles.h (objfile::reset_psymtabs): Update.
	* objfiles.c (objfile::objfile): Update.
	* psymtab.h (psymtab_storage::obstack): Update.
	(psymtab_storage::m_obstack): Use gdb::optional.
	(class psymtab_storage): Update comment.  Remove objfile
	parameter.
	* psymtab.c (psymtab_storage::psymtab_storage): Update.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* psymtab.h (psymtab_storage::allocate_psymtab): New method.
	<free_psymtabs>: Now private.
	* psymtab.c (psymtab_storage::allocate_psymtab): Implement.
	(allocate_psymtab): Use new method.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* xcoffread.c (xcoff_end_psymtab): Use allocate_dependencies.
	* psymtab.h (psymtab_storage::allocate_dependencies): New method.
	* mdebugread.c (parse_partial_symbols): Use
	allocate_dependencies.
	* dwarf2read.c (dwarf2_create_include_psymtab): Use
	allocate_dependencies.
	(process_psymtab_comp_unit_reader)
	(build_type_psymtab_dependencies): Likewise.
	* dbxread.c (dbx_end_psymtab): Use allocate_dependencies.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* psymtab.c (add_psymbol_to_bcache): Pass psymtab obstack to
	PSYMBOL_SET_LANGUAGE.
	(allocate_psymtab): Allocate psymtab on the psymtab obstack.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* psymtab.h (psymtab_storage::obstack): New method.
	<m_obstack>: Rename from obstack; now private.
	* psymtab.c (psymtab_storage): Update.
	* dwarf2read.c (create_addrmap_from_index)
	(create_addrmap_from_aranges, dwarf2_build_psymtabs_hard):
	Update.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* symfile.c (reread_symbols): Call objfile->reset_psymtabs.
	* objfiles.h (objfile::reset_psymtabs): New method.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* symmisc.c (print_symbol_bcache_statistics): Update.
	(print_objfile_statistics): Update.
	* symfile.c (reread_symbols): Update.
	* psymtab.h (class psymtab_storage): New.
	* psymtab.c (psymtab_storage): New constructor.
	(~psymtab_storage): New destructor.
	(require_partial_symbols): Update.
	(ALL_OBJFILE_PSYMTABS_REQUIRED): Rewrite.
	(find_pc_sect_psymtab, find_pc_sect_psymbol)
	(match_partial_symbol, lookup_partial_symbol, dump_psymtab)
	(psym_dump, recursively_search_psymtabs, psym_has_symbols)
	(psym_find_compunit_symtab_by_address, sort_pst_symbols)
	(start_psymtab_common, end_psymtab_common)
	(add_psymbol_to_bcache, add_psymbol_to_list, init_psymbol_list)
	(allocate_psymtab): Update.
	(psymtab_storage::discard_psymtab): Rename from discard_psymtab.
	Update.
	(dump_psymtab_addrmap, maintenance_print_psymbols)
	(maintenance_check_psymtabs): Update.
	(class objfile_psymtabs): Move to objfiles.h.
	* psympriv.h (discard_psymtab): Now inline.
	(psymtab_discarder::psymtab_discarder): Update.
	(psymtab_discarder::~psymtab_discarder): Update.
	(ALL_OBJFILE_PSYMTABS): Rewrite.
	* objfiles.h (struct objfile) <psymtabs, psymtabs_addrmap,
	free_psymtabs, psymbol_cache, global_psymbols, static_psymbols>:
	Remove fields.
	<partial_symtabs>: New field.
	(class objfile_psymtabs): Move from psymtab.h.  Update.
	* objfiles.c (objfile::objfile): Initialize partial_symtabs, not
	psymbol_cache.
	(objfile::~objfile): Don't destroy psymbol_cache.
	* mdebugread.c (parse_partial_symbols): Update.
	* dwarf2read.c (create_addrmap_from_index)
	(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
	(process_psymtab_comp_unit_reader, dwarf2_build_psymtabs_hard)
	(add_partial_subprogram, dwarf2_ranges_read): Update.
	* dwarf-index-write.c (write_address_map)
	(write_one_signatured_type, recursively_write_psymbols)
	(class debug_names, class debug_names, write_psymtabs_to_index):
	Update.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* symtab.h (SYMBOL_SET_NAMES): Update.
	(symbol_set_names): Update.
	(MSYMBOL_SET_NAMES): Update.
	* symtab.c (symbol_set_names): Change argument to be an
	objfile_per_bfd_storage.
	* psymtab.c (add_psymbol_to_bcache): Update.
	* psympriv.h (PSYMBOL_SET_NAMES): Take per_bfd argument.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* symtab.c (create_demangled_names_hash): Change argument to be an
	objfile_per_bfd_storage.
	(symbol_set_names): Update.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* xcoffread.c (xcoff_initial_scan): Unconditionally call
	init_psymbol_list.
	* psymtab.c (init_psymbol_list): Do nothing if already called.
	* psympriv.h (init_psymbol_list): Add comment.
	* dwarf2read.c (dwarf2_build_psymtabs): Unconditionally call
	init_psymbol_list.
	* dbxread.c (dbx_symfile_read): Unconditionally call
	init_psymbol_list.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* xcoffread.c (scan_xcoff_symtab): Update.
	* psymtab.c (add_psymbol_to_list): Replace "list" parameter with
	"where".
	* mdebugread.c (parse_partial_symbols)
	(handle_psymbol_enumerators): Update.
	* dwarf2read.c (add_partial_symbol, load_partial_dies): Update.
	* dbxread.c (read_dbx_symtab): Update.
	* psympriv.h (psymbol_placement): New enum.
	(add_psymbol_to_list): Update.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* xcoffread.c (xcoff_start_psymtab): Remove global_psymbols and
	static_psymbols parameters.
	(scan_xcoff_symtab): Update.
	* psymtab.c (start_psymtab_common): Remove global_psymbols and
	static_psymbols parameters.
	* psympriv.h (start_psymtab_common): Update.
	* mdebugread.c (parse_partial_symbols): Update.
	* dwarf2read.c (create_partial_symtab): Update.
	* dbxread.c (read_dbx_symtab): Update.
	(start_psymtab): Remove global_psymbols and static_psymbols
	parameters.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* xcoffread.c (xcoff_end_psymtab): Remove some initializations.
	* psymtab.c (allocate_psymtab): Add comment.
	* psympriv.h (allocate_psymtab): Add comment.
	* dwarf2read.c (dwarf2_create_include_psymtab): Remove some
	initializations.
	* dbxread.c (dbx_end_psymtab): Remove some initializations.

2019-01-10  Tom Tromey  <tom@tromey.com>

	* symfile.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs):
	Don't declare.
	* mipsread.c: Include mdebugread.h.
	* mdebugread.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs):
	Declare.
	* elfread.c: Include mdebugread.h.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* dbxread.c (dbx_end_psymtab): Use objfile_psymtabs.
	* mdebugread.c (parse_partial_symbols): Use objfile_psymtabs.
	* psymtab.c (ALL_OBJFILE_PSYMTABS_REQUIRED): Remove.
	(psym_map_symtabs_matching_filename, find_pc_sect_psymtab)
	(psym_lookup_symbol, psym_find_last_source_symtab)
	(psym_forget_cached_source_info, psym_print_stats)
	(psym_expand_symtabs_for_function, psym_expand_all_symtabs)
	(psym_expand_symtabs_with_fullname, psym_map_symbol_filenames)
	(psym_map_matching_symbols, psym_expand_symtabs_matching)
	(psym_find_compunit_symtab_by_address)
	(maintenance_print_psymbols, maintenance_info_psymtabs)
	(maintenance_check_psymtabs): Use ranged for.
	* psymtab.h (class objfile_psymtabs): New.
	(require_partial_symbols): Return objfile_psymtabs.
	* psympriv.h (ALL_OBJFILE_PSYMTABS): Remove.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symfile.c (overlay_invalidate_all, find_pc_overlay)
	(find_pc_mapped_section, list_overlays_command)
	(map_overlay_command, unmap_overlay_command)
	(simple_overlay_update): Use all_objfiles.
	* spu-tdep.c (spu_overlay_update): Use all_objfiles.
	* printcmd.c (info_symbol_command): Use all_objfiles.
	* objfiles.h (ALL_OBJSECTIONS): Remove.
	* maint.c (maintenance_translate_address): Use all_objfiles.
	* gcore.c (gcore_create_callback): Use all_objfiles.
	(objfile_find_memory_regions): Likewise.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symtab.c (find_line_symtab, info_sources_command)
	(make_source_files_completion_list): Use objfile_compunits.
	* source.c (select_source_symtab): Use objfile_compunits.
	* objfiles.h (struct objfile): Update comment.
	(ALL_OBJFILES): Remove.
	(ALL_FILETABS): Remove.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Use
	objfile_compunits.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symmisc.c (print_objfile_statistics, dump_objfile)
	(maintenance_print_symbols): Use compunit_filetabs.
	* source.c (forget_cached_source_info_for_objfile): Use
	compunit_filetabs.
	* objfiles.h (ALL_OBJFILE_FILETABS): Remove.
	(ALL_FILETABS): Use compunit_filetabs.
	* objfiles.c (objfile_relocate1): Use compunit_filetabs.
	* coffread.c (coff_symtab_read): Use compunit_filetabs.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symtab.h (ALL_COMPUNIT_FILETABS): Remove.
	(compunit_filetabs): New.
	* symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use
	compunit_filetabs.
	(info_sources_command, make_source_files_completion_list): Remove
	declaration.
	* symmisc.c (print_objfile_statistics, dump_objfile)
	(maintenance_print_symbols): Remove declaration.
	(maintenance_info_symtabs): Use compunit_filetabs.
	(maintenance_info_line_tables): Likewise.
	* source.c (select_source_symtab): Change local variable name.
	(forget_cached_source_info_for_objfile): Remove declaration.
	* objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs.
	* objfiles.c (objfile_relocate1): Remove declaration.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
	declaration.
	* maint.c (count_symtabs_and_blocks): Use compunit_filetabs.
	* coffread.c (coff_symtab_read): Remove declaration.
	* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
	compunit_filetabs.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symtab.c (lookup_objfile_from_block)
	(find_pc_sect_compunit_symtab, search_symbols)
	(default_collect_symbol_completion_matches_break_on): Use
	objfile_compunits.
	* objfiles.h (ALL_COMPUNITS): Remove.
	* maint.c (count_symtabs_and_blocks): Use objfile_compunits.
	* cp-support.c (add_symbol_overload_list_qualified): Use
	objfile_compunits.
	* ada-lang.c (ada_collect_symbol_completion_matches)
	(ada_add_global_exceptions): Use objfile_compunits.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* source.c (select_source_symtab)
	(forget_cached_source_info_for_objfile): Remove declaration.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
	declaration.
	* maint.c (count_symtabs_and_blocks): Remove declaration.
	* cp-support.c (add_symbol_overload_list_qualified): Remove
	declaration.
	* coffread.c (coff_symtab_read): Remove declaration.
	* symtab.c (lookup_symbol_in_objfile_symtabs)
	(basic_lookup_transparent_type_1): Use objfile_compunits.
	(lookup_objfile_from_block, find_pc_sect_compunit_symtab)
	(info_sources_command, search_symbols)
	(default_collect_symbol_completion_matches_break_on)
	(make_source_files_completion_list): Remove declaration.
	* ada-lang.c (add_nonlocal_symbols): Use objfile_compunits.
	(ada_collect_symbol_completion_matches)
	(ada_add_global_exceptions): Remove declaration.
	* linespec.c (iterate_over_all_matching_symtabs): Use
	objfile_compunits.
	* objfiles.h (ALL_OBJFILE_COMPUNITS): Remove.
	(class objfile_compunits): New.
	(ALL_COMPUNITS): Use objfile_compunits.
	* symmisc.c (print_objfile_statistics, maintenance_info_symtabs)
	(maintenance_check_symtabs, maintenance_info_line_tables): Use
	objfile_compunits.
	* objfiles.c (objfile_relocate1): Use objfile_compunits.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symtab.c (search_symbols)
	(default_collect_symbol_completion_matches_break_on): Use
	objfile_msymbols.
	* ada-lang.c (ada_lookup_simple_minsym)
	(ada_collect_symbol_completion_matches): Use objfile_msymbols.
	* minsyms.c (find_solib_trampoline_target): Use objfile_msymbols.
	* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Use
	objfile_msymbols.
	* coffread.c (coff_symfile_read): Use objfile_msymbols.
	* symmisc.c (dump_msymbols): Use objfile_msymbols.
	* objc-lang.c (find_methods): Use objfile_msymbols.
	(info_selectors_command, info_classes_command): Likewise.
	* stabsread.c (scan_file_globals): Use objfile_msymbols.
	* objfiles.h (class objfile_msymbols): New.
	(ALL_OBJFILE_MSYMBOLS): Remove.
	(ALL_MSYMBOLS): Remove.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* common/next-iterator.h (next_adapter): Add Iterator template
	parameter.
	* objfiles.h (ALL_OBJFILES_SAFE): Remove.
	(class all_objfiles_safe): New.
	* jit.c (jit_inferior_exit_hook): Use all_objfiles_safe.
	* objfiles.c (put_objfile_before): Update comment.
	(add_separate_debug_objfile): Likewise.
	(free_all_objfiles): Use all_objfiles_safe.
	(objfile_purge_solibs): Likewise.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* symtab.c (iterate_over_symtabs, matching_obj_sections)
	(expand_symtab_containing_pc, lookup_static_symbol)
	(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
	(find_symbol_at_address, find_line_symtab, find_main_name): Use
	all_objfiles.
	* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
	* breakpoint.c (create_overlay_event_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint): Use all_objfiles.
	* linux-thread-db.c (try_thread_db_load_from_pdir)
	(has_libpthread): Use all_objfiles.
	* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
	* linespec.c (iterate_over_all_matching_symtabs)
	(search_minsyms_for_name): Use all_objfiles.
	* maint.c (maintenance_info_sections): Use all_objfiles.
	* main.c (captured_main_1): Use all_objfiles.
	* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
	* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
	* guile/scm-pretty-print.c
	(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
	* solib-spu.c (append_ocl_sos): Use all_objfiles.
	* symmisc.c (maintenance_print_symbols): Use all_objfiles.
	(maintenance_print_msymbols): Use all_objfiles.
	* source.c (select_source_symtab): Use all_objfiles.
	* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
	* symfile.c (remove_symbol_file_command)
	(expand_symtabs_matching, map_symbol_filenames): Use
	all_objfiles.
	* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
	all_objfiles.
	* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
	* objc-lang.c (find_methods): Use all_objfiles.
	* objfiles.c (have_partial_symbols, have_full_symbols)
	(have_minimal_symbols, qsort_cmp)
	(default_iterate_over_objfiles_in_search_order): Use
	all_objfiles.
	* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
	* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
	(maintenance_check_psymtabs): Use all_objfiles.
	(ALL_PSYMTABS): Remove.
	* compile/compile-object-run.c (do_module_cleanup): Use
	all_objfiles.
	* blockframe.c (find_pc_partial_function): Use all_objfiles.
	* cp-support.c (add_symbol_overload_list_qualified): Use
	all_objfiles.
	* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
	Use all_objfiles.
	* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
	* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
	all_objfiles.
	* python/py-objfile.c (objfpy_lookup_objfile_by_name)
	(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
	* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
	Uses all_objfiles.
	* solib.c (solib_read_symbols): Use all_objfiles

2019-01-09  Tom Tromey  <tom@tromey.com>

	* probe.c (parse_probes_in_pspace): Use all_objfiles.
	* guile/scm-progspace.c (gdbscm_progspace_objfiles): Use
	all_objfiles.
	* objfiles.h (ALL_PSPACE_OBJFILES): Remove.
	* symmisc.c (print_symbol_bcache_statistics)
	(print_objfile_statistics, maintenance_print_objfiles)
	(maintenance_info_symtabs, maintenance_check_symtabs)
	(maintenance_expand_symtabs, maintenance_info_line_tables): Use
	all_objfiles.
	* source.c (forget_cached_source_info): Use all_objfiles.
	* symfile-debug.c (set_debug_symfile): Use all_objfiles.
	* elfread.c (elf_gnu_ifunc_resolve_by_cache)
	(elf_gnu_ifunc_resolve_by_got): Use all_objfiles.
	* objfiles.c (update_section_map): Use all_objfiles.
	(shared_objfile_contains_address_p): Likewise.
	* psymtab.c (maintenance_info_psymtabs): Use all_objfiles.
	* python/py-progspace.c (pspy_get_objfiles): Use all_objfiles.

2019-01-09  Tom Tromey  <tom@tromey.com>

	* common/next-iterator.h: New file.
	* objfiles.h (class all_objfiles): New.
	(struct objfile_iterator): New.

2019-01-09  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* NEWS: Move the description of the changed "frame", "select-frame",
	 and "info frame" commands to the Changed commands section.

2019-01-09  Simon Marchi  <simon.marchi@ericsson.com>

	* gdbtypes.c (check_stub_method_group): Remove handling of old
	mangling schemes.
	* linespec.c (find_methods): Likewise.
	* stabsread.c (read_member_functions): Likewise.
	* valops.c (search_struct_method): Likewise.
	(value_struct_elt_for_reference): Likewise.
	* NEWS: Mention this change.

2019-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

	* cli/cli-cmds.c (list_command): Pass a source_lines_range to
	print_source_lines.
	* source.c (print_source_lines_base): Update line number check.
	(print_source_lines): New function.
	(source_lines_range::source_lines_range): New function.
	* source.h (class source_lines_range): New class.
	(print_source_lines): New declaration.

2019-01-09  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* linespec.c (linespec_state_destructor): Free self->canonical_names.

2019-01-08  Tom Tromey  <tom@tromey.com>
	    Simon Marchi  <simon.marchi@ericsson.com>

	PR gdb/24060
	* ada-exp.y (DOLLAR_VARIABLE): Rename from SPECIAL_VARIABLE.
	* ada-lex.l (DOLLAR_VARIABLE): Likewise.
	* c-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE.
	* f-exp.y (DOLLAR_VARIABLE): Likewise.
	* m2-exp.y (DOLLAR_VARIABLE): Rename from INTERNAL_VAR.
	* p-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE.

2019-01-08  Andrew Burgess  <andrew.burgess@embecosm.com>

	* source.c (select_source_symtab): Move header comment to
	declaration in source.h.
	(forget_cached_source_info_for_objfile): Likewise.
	(forget_cached_source_info): Likewise.
	(identify_source_line): Likewise.
	* source.h (identify_source_line): Move declaration from symtab.h
	and add comment from source.c
	(print_source_lines): Likewise.
	(forget_cached_source_info_for_objfile): Likewise.
	(forget_cached_source_info): Likewise.
	(select_source_symtab): Likewise.
	(enum print_source_lines_flag): Move definition from symtab.h.
	* symtab.h (identify_source_line): Move declaration to source.h.
	(print_source_lines): Likewise.
	(forget_cached_source_info_for_objfile): Likewise.
	(forget_cached_source_info): Likewise.
	(select_source_symtab): Likewise.
	(enum print_source_lines_flag): Move definition to source.h.
	* tui/tui-hooks.c: Add 'source.h' include.

2019-01-08  Andrew Burgess  <andrew.burgess@embecosm.com>

	* source.c (print_source_lines_base): Handle requests to print
	reverse line number sequences, and guard against empty lines
	string.

2019-01-08  Andrew Burgess  <andrew.burgess@embecosm.com>

	* source.c (print_source_lines_base): Fix skip of '\r' if next
	character is '\n'.

2019-01-06  Tom Tromey  <tom@tromey.com>

	* c-exp.y (struct c_parse_state) <macro_original_text,
	expansion_obstack>: New member.
	(macro_original_text, expansion_obstack): Remove globals.
	(scan_macro_expansion, scanning_macro_expansion)
	(finished_macro_expansion): Update.
	(scan_macro_cleanup): Remove.
	(yylex, c_parse): Update.

2019-01-06  Tom Tromey  <tom@tromey.com>

	* c-exp.y (struct c_parse_state) <strings>: New member.
	(operator_stoken): Update.

2019-01-06  Tom Tromey  <tom@tromey.com>

	* parser-defs.h (type_ptr): Remove typedef.  Don't declare VEC.
	(union type_stack_elt) <typelist_val>: Now a pointer to
	std::vector.
	(type_stack_cleanup): Don't declare.
	(push_typelist): Update.
	* parse.c (pop_typelist): Return a std::vector.
	(push_typelist): Take a std::vector.
	(follow_types): Update.  Do not free args.
	(type_stack_cleanup): Remove.
	* c-exp.y (struct c_parse_state): New.
	(cpstate): New global.
	(type_aggregate_p, exp, ptr_operator, parameter_typelist)
	(nonempty_typelist): Update.
	(func_mod): Create a new vector.
	(c_parse): Create a c_parse_state.
	(check_parameter_typelist): Do not delete params.
	(function_method): Update.  Do not delete type_list.

2019-01-06  Tom Tromey  <tom@tromey.com>

	PR gdb/28155:
	* python/py-finishbreakpoint.c (bpfinishpy_init): Use
	check_typedef.
	* infcmd.c (finish_command_fsm_should_stop): Use check_typedef.
	(print_return_value): Likewise.

2019-01-05  Tom Tromey  <tom@tromey.com>

	* contrib/cleanup_check.py: Remove.
	* contrib/gcc-with-excheck: Remove.
	* contrib/exsummary.py: Remove.
	* contrib/excheck.py: Remove.

2019-01-05  Joel Brobecker  <brobecker@adacore.com>

	* thread.c (delete_thread_1): Add gdb_assert that THR is not
	NULL. Initialize tpprev to NULL instead of assigning it
	to NULL on the next statement.
	* windows-nat.c (windows_delete_thread): Remove check for
	main_thread_id before printing thread exit notifications.
	(get_windows_debug_event) <EXIT_THREAD_DEBUG_EVENT>:
	Remove thread ID check against main_thread_id.
	<CREATE_PROCESS_DEBUG_EVENT>: Remove call to
	windows_delete_thread.
	<EXIT_PROCESS_DEBUG_EVENT>: Add call to windows_delete_thread.

2019-01-04  Tom Tromey  <tom@tromey.com>

	* compile/compile.c (_initialize_compile): Use upper case for
	metasyntactic variables.
	* symmisc.c (_initialize_symmisc): Use upper case for
	metasyntactic variables.
	* psymtab.c (_initialize_psymtab): Use upper case for
	metasyntactic variables.
	* demangle.c (demangle_command): Use upper case for metasyntactic
	variables.
	(_initialize_demangler): Likewise.
	* ax-gdb.c (_initialize_ax_gdb): Use upper case for metasyntactic
	variables.

2019-01-03  Tom Tromey  <tom@tromey.com>

	* tui/tui-source.c (tui_set_source_content): Use xstrdup.

2019-01-03  Tom Tromey  <tom@tromey.com>

	* python/py-symtab.c (salpy_str): Update.
	(struct salpy_sal_object) <symtab>: Now a PyObject.
	(salpy_dealloc): Update.
	(del_objfile_sal): Use gdbpy_ref.

2019-01-03  Tom Tromey  <tom@tromey.com>

	* python/py-type.c (convert_field): Use new_reference.  Return
	gdbpy_ref.
	(make_fielditem): Return gdbpy_ref.
	(typy_fields): Update.
	(typy_getitem): Update.
	(field_name): Return gdbpy_ref.  Use new_reference.
	(typy_iterator_iternext): Update.

2019-01-03  Tom Tromey  <tom@tromey.com>

	* python/py-record.c (gdbpy_stop_recording): Use Py_RETURN_NONE.

2019-01-03  Tom Tromey  <tom@tromey.com>

	* python/py-value.c (valpy_dealloc): Use Py_XDECREF.
	* python/py-type.c (typy_fields_items): Use gdbpy_ref.
	* python/py-progspace.c (pspy_set_printers): Use gdbpy_ref.
	(pspy_set_frame_filters, pspy_set_frame_unwinders)
	(pspy_set_type_printers): Likewise.
	* python/py-function.c (fnpy_init): Use gdbpy_ref.
	* python/py-cmd.c (cmdpy_init): Use gdbpy_ref.
	* python/py-objfile.c (objfpy_set_printers): Use gdbpy_ref.
	(objfpy_set_frame_filters, objfpy_set_frame_unwinders)
	(objfpy_set_type_printers): Likewise.

2019-01-03  Tom Tromey  <tom@tromey.com>

	* python/python.c (gdbpy_enter, ~gdbpy_enter): Update.
	(gdbpy_print_stack): Use gdbpy_err_fetch.
	* python/python-internal.h (class gdbpy_err_fetch): New class.
	(class gdbpy_enter) <m_error_type, m_error_value,
	m_error_traceback>: Remove.
	<m_error>: New member.
	(gdbpy_exception_to_string): Don't declare.
	* python/py-varobj.c (py_varobj_iter_next): Use gdbpy_err_fetch.
	* python/py-value.c (convert_value_from_python): Use
	gdbpy_err_fetch.
	* python/py-utils.c (gdbpy_err_fetch::to_string): Rename from
	gdbpy_exception_to_string.
	(gdbpy_handle_exception): Use gdbpy_err_fetch.
	* python/py-prettyprint.c (print_stack_unless_memory_error): Use
	gdbpy_err_fetch.

2019-01-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* linux-nat.c (delete_lwp_cleanup): Delete.
	(struct lwp_deleter): New struct.
	(lwp_info_up): New typedef.
	(linux_nat_target::follow_fork): Delete cleanup, and make use of
	lwp_info_up.

2019-01-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* linux-fork.c (class scoped_switch_fork_info): New class.
	(inferior_call_waitpid): Update to use scoped_switch_fork_info.

2019-01-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* valops.c (find_overload_match): Remove use of null_cleanup, and
	calls to do_cleanups.

2019-01-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* compile/compile-cplus-types.c
	(compile_cplus_instance::decl_name): Handle changes to
	cp_func_name.
	* cp-support.c (cp_func_name): Update header comment, update
	return type.
	* cp-support.h (cp_func_name): Update return type in declaration.
	* valops.c (find_overload_match): Move temp_func local to top
	level of function and change its type.  Use temp_func to hold and
	delete temporary string obtained from cp_func_name.

2019-01-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* remote.c (remote_target::remote_check_symbols): Convert `msg` to
	gdb::char_vector, remove cleanup, and update uses of `msg`.

2019-01-03  Jim Wilson  <jimw@sifive.com>

	* riscv-tdep.c (riscv_freg_feature): Drop s0 name from f8.

2019-01-02  Tom Tromey  <tom@tromey.com>

	* xml-tdesc.c (xml_cache): Hold a target_desc_up.
	(tdesc_parse_xml): Remove cleanups.
	* target-descriptions.h (make_cleanup_free_target_description):
	Don't declare.
	(target_desc_deleter): New struct.
	(target_desc_up): New typedef.
	* target-descriptions.c (target_desc_deleter::operator()): Rename
	from free_target_description.
	(make_cleanup_free_target_description): Remove.

2019-01-02  Tom Tromey  <tom@tromey.com>

	* linespec.c (struct linespec_parser): Rename from ls_parser.  Add
	constructor, destructor.
	(linespec_parser): Remove typedef.
	(~linespec_parser): Rename from linespec_parser_delete.
	(linespec_lex_to_end, linespec_complete_label)
	(linespec_complete): Update.
	(decode_line_full): Remove cleanups.
	(decode_line_1): Update.

2019-01-02  Tom Tromey  <tom@tromey.com>

	* python/python-internal.h (inferior_to_inferior_object): Change
	return type.
	* python/py-exitedevent.c (create_exited_event_object): Update.
	* python/py-inferior.c (inferior_to_inferior_object): Return
	gdbpy_ref.
	(python_new_inferior, python_inferior_deleted)
	(thread_to_thread_object, delete_thread_object)
	(build_inferior_list, gdbpy_selected_inferior): Update.
	* python/py-infthread.c (create_thread_object): Update.  Also fail
	if inferior_to_inferior_object fails.

2019-01-02  Simon Marchi  <simon.marchi@ericsson.com>

	* inferior.h (class inferior) <displaced_step_state>: New field.
	* infrun.h (struct displaced_step_state): Move here from
	infrun.c.  Initialize fields, add constructor.
	<inf>: Remove field.
	<reset>: New method.
	* infrun.c (struct displaced_step_inferior_state): Move to
	infrun.h.
	(displaced_step_inferior_states): Remove.
	(get_displaced_stepping_state): Adust.
	(displaced_step_in_progress_any_inferior): Adjust.
	(displaced_step_in_progress_thread): Adjust.
	(displaced_step_in_progress): Adjust.
	(add_displaced_stepping_state): Remove.
	(get_displaced_step_closure_by_addr): Adjust.
	(remove_displaced_stepping_state): Remove.
	(infrun_inferior_exit): Call displaced_step_state.reset.
	(use_displaced_stepping): Don't check for NULL.
	(displaced_step_prepare_throw): Call
	get_displaced_stepping_state.
	(displaced_step_fixup): Don't check for NULL.
	(prepare_for_detach): Don't check for NULL.

2019-01-02  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* infcall.c (call_function_by_hand_dummy): cleanup/destroy sm
	 in case of call that did not complete.

2019-01-02  Andrey Utkin  <autkin@undo.io>

	* symfile.c (find_separate_debug_file): Fix search of debug files for
	remote debuggee.

2019-01-02  Tom Tromey  <tom@tromey.com>

	* python/py-inferior.c (gdbpy_initialize_inferior): Fix
	indentation.
	* python/py-frame.c (frapy_older): Remove cast.
	(frapy_newer): Likewise.
	* python/py-breakpoint.c (local_setattro): Remove cast.
	* python/py-arch.c (archpy_name): Remove local variable.
	* python/py-type.c (gdbpy_lookup_type): Remove cast.

2019-01-02  Joel Brobecker  <brobecker@adacore.com>

	* unittests/basic_string_view/element_access/char/empty.cc:
	Fix year range in copyright header.

2019-01-01  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arch/riscv.h (struct riscv_gdbarch_features) <hw_float_abi>:
	Delete.
	<operator==>: Update with for removed field.
	<hash>: Likewise.
	* riscv-tdep.h (struct gdbarch_tdep) <features>: Renamed to...
	<isa_features>: ...this.
	<abi_features>: New field.
	(riscv_isa_flen): Update comment.
	(riscv_abi_xlen): New declaration.
	(riscv_abi_flen): New declaration.
	* riscv-tdep.c (riscv_isa_xlen): Update to get answer from
	isa_features.
	(riscv_abi_xlen): New function.
	(riscv_isa_flen): Update to get answer from isa_features.
	(riscv_abi_flen): New function.
	(riscv_has_fp_abi): Update to get answer from abi_features.
	(riscv_call_info::riscv_call_info): Use abi xlen and flen, not isa
	xlen and flen.
	(riscv_call_info) <xlen, flen>: Update comment.
	(riscv_call_arg_struct): Remove invalid assertions
	(riscv_features_from_gdbarch_info): Update now hw_float_abi field
	is removed.
	(riscv_gdbarch_init): Gather isa features and abi features
	separately, ensure both match on the gdbarch when reusing an old
	gdbarch.  Relax an error check to allow 32-bit abi float to run on
	a target with 64-bit float hardware.

2019-01-01  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* source.c (search_command_helper): Stop reverse search
	when line 1 has been searched.

2019-01-01  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* record-full.c (record_full_base_target::close): Rewrite
	record_full_core_buf_list free logic.

2019-01-01  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* break-catch-syscall.c (print_one_catch_syscall): xfree
	the last text.

2019-01-01  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Update Copyright year in version
	message.

2019-01-01  Joel Brobecker  <brobecker@adacore.com>

	Update copyright year range in all GDB files.

2019-01-01, 19  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2018.

For older changes see ChangeLog-2018.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: