readline/examples/rlfe/config.h.in - third_party/binutils-gdb - Git at Google

 /* Copyright 2004 Per Bothner <per@bothner.com>
  * Based on config.h from screen-4.0.2.
  * Copyright (c) 1993-2000
  *      Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
  *      Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
  * Copyright (c) 1987 Oliver Laumann
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program (see the file COPYING); if not, write to the
  * Free Software Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA
  *
  ****************************************************************
  * $Id$ FAU
  */


 /**********************************************************************
  *
  *	User Configuration Section
  */


 /*
  * define PTYMODE if you do not like the default of 0622, which allows
  * public write to your pty.
  * define PTYGROUP to some numerical group-id if you do not want the
  * tty to be in "your" group.
  * Note, screen is unable to change mode or group of the pty if it
  * is not installed with sufficient privilege. (e.g. set-uid-root)
  * define PTYROFS if the /dev/pty devices are mounted on a read-only
  * filesystem so screen should not even attempt to set mode or group
  * even if running as root (e.g. on TiVo).
  */
 #undef PTYMODE
 #undef PTYGROUP
 #undef PTYROFS

 /*
  * If screen is NOT installed set-uid root, screen can provide tty
  * security by exclusively locking the ptys.  While this keeps other
  * users from opening your ptys, it also keeps your own subprocesses
  * from being able to open /dev/tty.  Define LOCKPTY to add this
  * exclusive locking.
  */
 #undef LOCKPTY


 /**********************************************************************
  *
  *	End of User Configuration Section
  *
  *      Rest of this file is modified by 'configure'
  *      Change at your own risk!
  *
  */

 /*
  * Some defines to identify special unix variants
  */
 #ifndef SVR4
 #undef SVR4
 #endif

 #ifndef _POSIX_SOURCE
 #undef _POSIX_SOURCE
 #endif

 /*
  * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX).
  */
 #undef POSIX

 /*
  * Define TERMIO if you have struct termio instead of struct sgttyb.
  * This is usually the case for SVID systems, where BSD uses sgttyb.
  * POSIX systems should define this anyway, even though they use
  * struct termios.
  */
 #undef TERMIO

 /*
  * Define CYTERMIO if you have cyrillic termio modes.
  */
 #undef CYTERMIO

 /*
  * Define TERMINFO if your machine emulates the termcap routines
  * with the terminfo database.
  * Thus the .screenrc file is parsed for
  * the command 'terminfo' and not 'termcap'.
  */
 #undef TERMINFO

 /*
  * If your library does not define ospeed, define this.
  */
 #undef NEED_OSPEED

 /*
  * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX)
  */
 #ifndef SYSV
 #undef SYSV
 #endif

 /*
  * Define SIGVOID if your signal handlers return void.  On older
  * systems, signal returns int, but on newer ones, it returns void.
  */
 #undef SIGVOID

 /*
  * Define USESIGSET if you have sigset for BSD 4.1 reliable signals.
  */
 #undef USESIGSET

 /*
  * Define SYSVSIGS if signal handlers must be reinstalled after
  * they have been called.
  */
 #undef SYSVSIGS

 /*
  * Define BSDWAIT if your system defines a 'union wait' in <sys/wait.h>
  *
  * Only allow BSDWAIT i.e. wait3 on nonposix systems, since
  * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl
  *
  */
 #ifndef POSIX
 #undef BSDWAIT
 #endif

 /*
  * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com
  */
 #ifdef BSDWAIT
 #undef USE_WAIT2
 #endif

 /*
  * Define if you have the utempter utmp helper program
  */
 #undef HAVE_UTEMPTER

 /*
  * If ttyslot() breaks getlogin() by returning indexes to utmp entries
  * of type DEAD_PROCESS, then our getlogin() replacement should be
  * selected by defining BUGGYGETLOGIN.
  */
 #undef BUGGYGETLOGIN

 /*
  * If your system has the calls setreuid() and setregid(),
  * define HAVE_SETREUID. Otherwise screen will use a forked process to
  * safely create output files without retaining any special privileges.
  */
 #undef HAVE_SETREUID

 /*
  * If your system supports BSD4.4's seteuid() and setegid(), define
  * HAVE_SETEUID.
  */
 #undef HAVE_SETEUID

 /*
  * If you want the "time" command to display the current load average
  * define LOADAV. Maybe you must install screen with the needed
  * privileges to read /dev/kmem.
  * Note that NLIST_ stuff is only checked, when getloadavg() is not available.
  */
 #undef LOADAV

 #undef LOADAV_NUM
 #undef LOADAV_TYPE
 #undef LOADAV_SCALE
 #undef LOADAV_GETLOADAVG
 #undef LOADAV_UNIX
 #undef LOADAV_AVENRUN
 #undef LOADAV_USE_NLIST64

 #undef NLIST_DECLARED
 #undef NLIST_STRUCT
 #undef NLIST_NAME_UNION

 /*
  * If your system has the new format /etc/ttys (like 4.3 BSD) and the
  * getttyent(3) library functions, define GETTTYENT.
  */
 #undef GETTTYENT

 /*
  * Define USEBCOPY if the bcopy/memcpy from your system's C library
  * supports the overlapping of source and destination blocks.  When
  * undefined, screen uses its own (probably slower) version of bcopy().
  *
  * SYSV machines may have a working memcpy() -- Oh, this is
  * quite unlikely. Tell me if you see one.
  * "But then, memmove() should work, if at all available" he thought...
  * Boing, never say "works everywhere" unless you checked SCO UNIX.
  * Their memove fails the test in the configure script. Sigh. (Juergen)
  */
 #undef USEBCOPY
 #undef USEMEMCPY
 #undef USEMEMMOVE

 /*
  * If your system has vsprintf() and requires the use of the macros in
  * "varargs.h" to use functions with variable arguments,
  * define USEVARARGS.
  */
 #undef USEVARARGS

 /*
  * If your system has strerror() define this.
  */
 #undef HAVE_STRERROR

 /*
  * If the select return value doesn't treat a descriptor that is
  * usable for reading and writing as two hits, define SELECT_BROKEN.
  */
 #undef SELECT_BROKEN

 /*
  * Define this if your system supports named pipes.
  */
 #undef NAMEDPIPE

 /*
  * Define this if your system exits select() immediatly if a pipe is
  * opened read-only and no writer has opened it.
  */
 #undef BROKEN_PIPE

 /*
  * Define this if the unix-domain socket implementation doesn't
  * create a socket in the filesystem.
  */
 #undef SOCK_NOT_IN_FS

 /*
  * If your system has setenv() and unsetenv() define USESETENV
  */
 #undef USESETENV

 /*
  * If your system does not come with a setenv()/putenv()/getenv()
  * functions, you may bring in our own code by defining NEEDPUTENV.
  */
 #undef NEEDPUTENV

 /*
  * If the passwords are stored in a shadow file and you want the
  * builtin lock to work properly, define SHADOWPW.
  */
 #undef SHADOWPW

 /*
  * If you are on a SYS V machine that restricts filename length to 14
  * characters, you may need to enforce that by setting NAME_MAX to 14
  */
 #undef NAME_MAX		/* KEEP_UNDEF_HERE override system value */
 #undef NAME_MAX

 /*
  * define HAVE_RENAME if your system has a rename() function
  */
 #undef HAVE_RENAME

 /*
  * define HAVE__EXIT if your system has the _exit() call.
  */
 #undef HAVE__EXIT

 /*
  * define HAVE_LSTAT if your system has symlinks and the lstat() call.
  */
 #undef HAVE_LSTAT

 /*
  * define HAVE_UTIMES if your system has the utimes() call.
  */
 #undef HAVE_UTIMES

 /*
  * define HAVE_FCHOWN if your system has the fchown() call.
  */
 #undef HAVE_FCHOWN

 /*
  * define HAVE_FCHMOD if your system has the fchmod() call.
  */
 #undef HAVE_FCHMOD

 /*
  * define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib).
  */
 #undef HAVE_VSNPRINTF

 /*
  * define HAVE_GETCWD if your system has the getcwd() call.
  */
 #undef HAVE_GETCWD

 /*
  * define HAVE_SETLOCALE if your system has the setlocale() call.
  */
 #undef HAVE_SETLOCALE

 /*
  * define HAVE_STRFTIME if your system has the strftime() call.
  */
 #undef HAVE_STRFTIME

 /*
  * define HAVE_NL_LANGINFO if your system has the nl_langinfo() call
  * and <langinfo.h> defines CODESET.
  */
 #undef HAVE_NL_LANGINFO

 /*
  * Newer versions of Solaris include fdwalk, which can greatly improve
  * the startup time of screen; otherwise screen spends a lot of time
  * closing file descriptors.
  */
 #undef HAVE_FDWALK

 /*
  * define HAVE_DEV_PTC if you have a /dev/ptc character special
  * device.
  */
 #undef HAVE_DEV_PTC

 /*
  * define HAVE_SVR4_PTYS if you have a /dev/ptmx character special
  * device and support the ptsname(), grantpt(), unlockpt() functions.
  */
 #undef HAVE_SVR4_PTYS

 /*
  * define HAVE_GETPT if you have the getpt() function.
  */
 #undef HAVE_GETPT

 /*
  * define HAVE_OPENPTY if your system has the openpty() call.
  */
 #undef HAVE_OPENPTY

 /*
  * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen
  * to unusual environments. E.g. For SunOs the defaults are "qpr" and
  * "0123456789abcdef". For SunOs 4.1.2
  * #define PTYRANGE0 "pqrstuvwxyzPQRST"
  * is recommended by Dan Jacobson.
  */
 #undef PTYRANGE0
 #undef PTYRANGE1

 #define USEVARARGS

 #undef HAVE_SYS_STROPTS_H

 #undef HAVE_SYS_WAIT_H
	/* Copyright 2004 Per Bothner <per@bothner.com>
	* Based on config.h from screen-4.0.2.
	* Copyright (c) 1993-2000
	* Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
	* Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
	* Copyright (c) 1987 Oliver Laumann
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program (see the file COPYING); if not, write to the
	* Free Software Foundation, Inc.,
	* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
	*
	****************************************************************
	* $Id$ FAU
	*/





	/**********************************************************************
	*
	* User Configuration Section
	*/


	/*
	* define PTYMODE if you do not like the default of 0622, which allows
	* public write to your pty.
	* define PTYGROUP to some numerical group-id if you do not want the
	* tty to be in "your" group.
	* Note, screen is unable to change mode or group of the pty if it
	* is not installed with sufficient privilege. (e.g. set-uid-root)
	* define PTYROFS if the /dev/pty devices are mounted on a read-only
	* filesystem so screen should not even attempt to set mode or group
	* even if running as root (e.g. on TiVo).
	*/
	#undef PTYMODE
	#undef PTYGROUP
	#undef PTYROFS

	/*
	* If screen is NOT installed set-uid root, screen can provide tty
	* security by exclusively locking the ptys. While this keeps other
	* users from opening your ptys, it also keeps your own subprocesses
	* from being able to open /dev/tty. Define LOCKPTY to add this
	* exclusive locking.
	*/
	#undef LOCKPTY


	/**********************************************************************
	*
	* End of User Configuration Section
	*
	* Rest of this file is modified by 'configure'
	* Change at your own risk!
	*
	*/

	/*
	* Some defines to identify special unix variants
	*/
	#ifndef SVR4
	#undef SVR4
	#endif

	#ifndef _POSIX_SOURCE
	#undef _POSIX_SOURCE
	#endif

	/*
	* Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX).
	*/
	#undef POSIX

	/*
	* Define TERMIO if you have struct termio instead of struct sgttyb.
	* This is usually the case for SVID systems, where BSD uses sgttyb.
	* POSIX systems should define this anyway, even though they use
	* struct termios.
	*/
	#undef TERMIO

	/*
	* Define CYTERMIO if you have cyrillic termio modes.
	*/
	#undef CYTERMIO

	/*
	* Define TERMINFO if your machine emulates the termcap routines
	* with the terminfo database.
	* Thus the .screenrc file is parsed for
	* the command 'terminfo' and not 'termcap'.
	*/
	#undef TERMINFO

	/*
	* If your library does not define ospeed, define this.
	*/
	#undef NEED_OSPEED

	/*
	* Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX)
	*/
	#ifndef SYSV
	#undef SYSV
	#endif

	/*
	* Define SIGVOID if your signal handlers return void. On older
	* systems, signal returns int, but on newer ones, it returns void.
	*/
	#undef SIGVOID

	/*
	* Define USESIGSET if you have sigset for BSD 4.1 reliable signals.
	*/
	#undef USESIGSET

	/*
	* Define SYSVSIGS if signal handlers must be reinstalled after
	* they have been called.
	*/
	#undef SYSVSIGS

	/*
	* Define BSDWAIT if your system defines a 'union wait' in <sys/wait.h>
	*
	* Only allow BSDWAIT i.e. wait3 on nonposix systems, since
	* posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl
	*
	*/
	#ifndef POSIX
	#undef BSDWAIT
	#endif

	/*
	* On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com
	*/
	#ifdef BSDWAIT
	#undef USE_WAIT2
	#endif

	/*
	* Define if you have the utempter utmp helper program
	*/
	#undef HAVE_UTEMPTER

	/*
	* If ttyslot() breaks getlogin() by returning indexes to utmp entries
	* of type DEAD_PROCESS, then our getlogin() replacement should be
	* selected by defining BUGGYGETLOGIN.
	*/
	#undef BUGGYGETLOGIN

	/*
	* If your system has the calls setreuid() and setregid(),
	* define HAVE_SETREUID. Otherwise screen will use a forked process to
	* safely create output files without retaining any special privileges.
	*/
	#undef HAVE_SETREUID

	/*
	* If your system supports BSD4.4's seteuid() and setegid(), define
	* HAVE_SETEUID.
	*/
	#undef HAVE_SETEUID

	/*
	* If you want the "time" command to display the current load average
	* define LOADAV. Maybe you must install screen with the needed
	* privileges to read /dev/kmem.
	* Note that NLIST_ stuff is only checked, when getloadavg() is not available.
	*/
	#undef LOADAV

	#undef LOADAV_NUM
	#undef LOADAV_TYPE
	#undef LOADAV_SCALE
	#undef LOADAV_GETLOADAVG
	#undef LOADAV_UNIX
	#undef LOADAV_AVENRUN
	#undef LOADAV_USE_NLIST64

	#undef NLIST_DECLARED
	#undef NLIST_STRUCT
	#undef NLIST_NAME_UNION

	/*
	* If your system has the new format /etc/ttys (like 4.3 BSD) and the
	* getttyent(3) library functions, define GETTTYENT.
	*/
	#undef GETTTYENT

	/*
	* Define USEBCOPY if the bcopy/memcpy from your system's C library
	* supports the overlapping of source and destination blocks. When
	* undefined, screen uses its own (probably slower) version of bcopy().
	*
	* SYSV machines may have a working memcpy() -- Oh, this is
	* quite unlikely. Tell me if you see one.
	* "But then, memmove() should work, if at all available" he thought...
	* Boing, never say "works everywhere" unless you checked SCO UNIX.
	* Their memove fails the test in the configure script. Sigh. (Juergen)
	*/
	#undef USEBCOPY
	#undef USEMEMCPY
	#undef USEMEMMOVE

	/*
	* If your system has vsprintf() and requires the use of the macros in
	* "varargs.h" to use functions with variable arguments,
	* define USEVARARGS.
	*/
	#undef USEVARARGS

	/*
	* If your system has strerror() define this.
	*/
	#undef HAVE_STRERROR

	/*
	* If the select return value doesn't treat a descriptor that is
	* usable for reading and writing as two hits, define SELECT_BROKEN.
	*/
	#undef SELECT_BROKEN

	/*
	* Define this if your system supports named pipes.
	*/
	#undef NAMEDPIPE

	/*
	* Define this if your system exits select() immediatly if a pipe is
	* opened read-only and no writer has opened it.
	*/
	#undef BROKEN_PIPE

	/*
	* Define this if the unix-domain socket implementation doesn't
	* create a socket in the filesystem.
	*/
	#undef SOCK_NOT_IN_FS

	/*
	* If your system has setenv() and unsetenv() define USESETENV
	*/
	#undef USESETENV

	/*
	* If your system does not come with a setenv()/putenv()/getenv()
	* functions, you may bring in our own code by defining NEEDPUTENV.
	*/
	#undef NEEDPUTENV

	/*
	* If the passwords are stored in a shadow file and you want the
	* builtin lock to work properly, define SHADOWPW.
	*/
	#undef SHADOWPW

	/*
	* If you are on a SYS V machine that restricts filename length to 14
	* characters, you may need to enforce that by setting NAME_MAX to 14
	*/
	#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */
	#undef NAME_MAX

	/*
	* define HAVE_RENAME if your system has a rename() function
	*/
	#undef HAVE_RENAME

	/*
	* define HAVE__EXIT if your system has the _exit() call.
	*/
	#undef HAVE__EXIT

	/*
	* define HAVE_LSTAT if your system has symlinks and the lstat() call.
	*/
	#undef HAVE_LSTAT

	/*
	* define HAVE_UTIMES if your system has the utimes() call.
	*/
	#undef HAVE_UTIMES

	/*
	* define HAVE_FCHOWN if your system has the fchown() call.
	*/
	#undef HAVE_FCHOWN

	/*
	* define HAVE_FCHMOD if your system has the fchmod() call.
	*/
	#undef HAVE_FCHMOD

	/*
	* define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib).
	*/
	#undef HAVE_VSNPRINTF

	/*
	* define HAVE_GETCWD if your system has the getcwd() call.
	*/
	#undef HAVE_GETCWD

	/*
	* define HAVE_SETLOCALE if your system has the setlocale() call.
	*/
	#undef HAVE_SETLOCALE

	/*
	* define HAVE_STRFTIME if your system has the strftime() call.
	*/
	#undef HAVE_STRFTIME

	/*
	* define HAVE_NL_LANGINFO if your system has the nl_langinfo() call
	* and <langinfo.h> defines CODESET.
	*/
	#undef HAVE_NL_LANGINFO

	/*
	* Newer versions of Solaris include fdwalk, which can greatly improve
	* the startup time of screen; otherwise screen spends a lot of time
	* closing file descriptors.
	*/
	#undef HAVE_FDWALK

	/*
	* define HAVE_DEV_PTC if you have a /dev/ptc character special
	* device.
	*/
	#undef HAVE_DEV_PTC

	/*
	* define HAVE_SVR4_PTYS if you have a /dev/ptmx character special
	* device and support the ptsname(), grantpt(), unlockpt() functions.
	*/
	#undef HAVE_SVR4_PTYS

	/*
	* define HAVE_GETPT if you have the getpt() function.
	*/
	#undef HAVE_GETPT

	/*
	* define HAVE_OPENPTY if your system has the openpty() call.
	*/
	#undef HAVE_OPENPTY

	/*
	* define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen
	* to unusual environments. E.g. For SunOs the defaults are "qpr" and
	* "0123456789abcdef". For SunOs 4.1.2
	* #define PTYRANGE0 "pqrstuvwxyzPQRST"
	* is recommended by Dan Jacobson.
	*/
	#undef PTYRANGE0
	#undef PTYRANGE1

	#define USEVARARGS

	#undef HAVE_SYS_STROPTS_H

	#undef HAVE_SYS_WAIT_H