# Copyright (C) 2010-2016 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file is part of the GDB testsuite.
# It tests the mechanism exposing breakpoints to Guile.

load_lib gdb-guile.exp

standard_testfile

if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
    return -1
}

# Skip all tests if Guile scripting is not enabled.
if { [skip_guile_tests] } { continue }

proc test_bkpt_basic { } {
    global srcfile testfile hex decimal

    with_test_prefix "test_bkpt_basic" {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	if ![gdb_guile_runto_main] {
	    return
	}

	# Initially there should be one breakpoint: main.

	gdb_scm_test_silent_cmd "guile (define blist (breakpoints))" \
	    "get breakpoint list 1"
	gdb_test "guile (print (car blist))" \
	    "<gdb:breakpoint #1 BP_BREAKPOINT enabled noisy hit:1 ignore:0 @main>" \
	    "check main breakpoint"
	gdb_test "guile (print (breakpoint-location (car blist)))" \
	    "main" "check main breakpoint location"

	set mult_line [gdb_get_line_number "Break at multiply."]
	gdb_breakpoint ${mult_line}
	gdb_continue_to_breakpoint "Break at multiply."

	# Check that the Guile breakpoint code noted the addition of a
	# breakpoint "behind the scenes".
	gdb_scm_test_silent_cmd "guile (define blist (breakpoints))" \
	    "get breakpoint list 2"
	gdb_scm_test_silent_cmd "guile (define mult-bkpt (cadr blist))" \
	    "get multiply breakpoint"
	gdb_test "guile (print (length blist))" \
	    "= 2" "check for two breakpoints"
	gdb_test "guile (print mult-bkpt)" \
	    "= #<gdb:breakpoint #2 BP_BREAKPOINT enabled noisy hit:1 ignore:0 @.*scm-breakpoint.c:$mult_line>" \
	    "check multiply breakpoint"
	gdb_test "guile (print (breakpoint-location mult-bkpt))" \
	    "scm-breakpoint\.c:${mult_line}*" \
	    "check multiply breakpoint location"

	# Check hit and ignore counts. 
	gdb_test "guile (print (breakpoint-hit-count mult-bkpt))" \
	    "= 1" "check multiply breakpoint hit count"
	gdb_scm_test_silent_cmd "guile (set-breakpoint-ignore-count! mult-bkpt 4)" \
	    "set multiply breakpoint ignore count"
	gdb_continue_to_breakpoint "Break at multiply."
	gdb_test "guile (print (breakpoint-hit-count mult-bkpt))" \
	    "= 6" "check multiply breakpoint hit count 2"
	gdb_test "print result" \
	    " = 545" "check expected variable result after 6 iterations"

	# Test breakpoint is enabled and disabled correctly.
	gdb_breakpoint [gdb_get_line_number "Break at add."]
	gdb_continue_to_breakpoint "Break at add."
	gdb_test "guile (print (breakpoint-enabled? mult-bkpt))" \
	    "= #t" "check multiply breakpoint enabled"
	gdb_scm_test_silent_cmd  "guile (set-breakpoint-enabled! mult-bkpt #f)" \
	    "set multiply breakpoint disabled"
	gdb_continue_to_breakpoint "Break at add."
	gdb_scm_test_silent_cmd  "guile (set-breakpoint-enabled! mult-bkpt #t)" \
	    "set multiply breakpoint enabled"
	gdb_continue_to_breakpoint "Break at multiply."

	# Test other getters and setters.
	gdb_scm_test_silent_cmd "guile (define blist (breakpoints))" \
	    "get breakpoint list 3"
	gdb_test "guile (print (breakpoint-thread mult-bkpt))" \
	    "= #f" "check breakpoint thread"
	gdb_test "guile (print (= (breakpoint-type mult-bkpt) BP_BREAKPOINT))" \
	    "= #t" "check breakpoint type"
	gdb_test "guile (print (map breakpoint-number blist))" \
	    "= \\(1 2 3\\)" "check breakpoint numbers"
    }
}

proc test_bkpt_deletion { } {
    global srcfile testfile hex decimal

    with_test_prefix test_bkpt_deletion {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	if ![gdb_guile_runto_main] {
	    return
	}

	# Test breakpoints are deleted correctly.
	set deltst_location [gdb_get_line_number "Break at multiply."]
	set end_location [gdb_get_line_number "Break at end."]
	gdb_scm_test_silent_cmd  "guile (define dp1 (make-breakpoint \"$deltst_location\"))" \
	    "create deltst breakpoint"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! dp1)" \
	    "register dp1"
	gdb_breakpoint [gdb_get_line_number "Break at end."]
	gdb_scm_test_silent_cmd "guile (define del-list (breakpoints))" \
	    "get breakpoint list 4"
	gdb_test "guile (print (length del-list))" \
	    "= 3" "number of breakpoints before delete"
	gdb_continue_to_breakpoint "Break at multiply." \
	    ".*$srcfile:$deltst_location.*"
	gdb_scm_test_silent_cmd  "guile (delete-breakpoint! dp1)" \
	    "delete breakpoint"
	gdb_test "guile (print (breakpoint-number dp1))" \
	    "ERROR: .*: Invalid object: <gdb:breakpoint> in position 1: #<gdb:breakpoint #-1>.*" \
	    "check breakpoint invalidated"
	gdb_scm_test_silent_cmd "guile (set! del-list (breakpoints))" \
	    "get breakpoint list 5"
	gdb_test "guile (print (length del-list))" \
	    "= 2" "number of breakpoints after delete"
	gdb_continue_to_breakpoint "Break at end." ".*$srcfile:$end_location.*"
    }
}

proc test_bkpt_cond_and_cmds { } {
    global srcfile testfile hex decimal

    with_test_prefix test_bkpt_cond_and_cmds {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	if ![gdb_guile_runto_main] {
	    return
	}

	# Test conditional setting.
	set bp_location1 [gdb_get_line_number "Break at multiply."]
	gdb_scm_test_silent_cmd  "guile (define bp1 (make-breakpoint \"$bp_location1\"))" \
	    "create multiply breakpoint"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! bp1)" \
	    "register bp1"
	gdb_continue_to_breakpoint "Break at multiply."
	gdb_scm_test_silent_cmd  "guile (set-breakpoint-condition! bp1 \"i == 5\")" \
	    "set condition"
	gdb_test "guile (print (breakpoint-condition bp1))" \
	    "= i == 5" "test condition has been set"
	gdb_continue_to_breakpoint "Break at multiply."
	gdb_test "print i" \
	    "5" "test conditional breakpoint stopped after five iterations"
	gdb_scm_test_silent_cmd  "guile (set-breakpoint-condition! bp1 #f)" \
	    "clear condition"
	gdb_test "guile (print (breakpoint-condition bp1))" \
	    "= #f" "test condition has been removed"
	gdb_continue_to_breakpoint "Break at multiply."
	gdb_test "print i" "6" "test breakpoint stopped after six iterations"

	# Test commands.
	gdb_breakpoint [gdb_get_line_number "Break at add."]
	set test {commands $bpnum}
	gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
	set test {print "Command for breakpoint has been executed."}
	gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
	set test {print result}
	gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
	gdb_test "end"

	gdb_scm_test_silent_cmd "guile (define blist (breakpoints))" \
	    "get breakpoint list 6"
	gdb_test "guile (print (breakpoint-commands (list-ref blist (- (length blist) 1))))" \
	    "print \"Command for breakpoint has been executed.\".*print result"
    }
}

proc test_bkpt_invisible { } {
    global srcfile testfile hex decimal

    with_test_prefix test_bkpt_invisible {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	if ![gdb_guile_runto_main] {
	    return
	}

	# Test invisible breakpoints.
	delete_breakpoints
	set ibp_location [gdb_get_line_number "Break at multiply."]
	gdb_scm_test_silent_cmd  "guile (define vbp1 (make-breakpoint \"$ibp_location\" #:internal #f))" \
	    "create visible breakpoint"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! vbp1)" \
	    "register vbp1"
	gdb_scm_test_silent_cmd "guile (define vbp (car (breakpoints)))" \
	    "get visible breakpoint"
	gdb_test "guile (print vbp)" \
	    "= #<gdb:breakpoint #2 BP_BREAKPOINT enabled noisy hit:0 ignore:0 @.*scm-breakpoint.c:$ibp_location>" \
	    "check visible bp obj exists"
	gdb_test "guile (print (breakpoint-location vbp))" \
	    "scm-breakpoint\.c:$ibp_location*" "check visible breakpoint location"
	gdb_test "guile (print (breakpoint-visible? vbp))" \
	    "= #t" "check breakpoint visibility"
	gdb_test "info breakpoints" \
	    "scm-breakpoint\.c:$ibp_location.*" \
	    "check info breakpoints shows visible breakpoints"
	delete_breakpoints
	gdb_scm_test_silent_cmd  "guile (define ibp (make-breakpoint \"$ibp_location\" #:internal #t))" \
	    "create invisible breakpoint"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! ibp)" \
	    "register ibp"
	gdb_test "guile (print ibp)" \
	    "= #<gdb:breakpoint #-$decimal BP_BREAKPOINT enabled noisy hit:0 ignore:0 @.*scm-breakpoint.c:$ibp_location>" \
	    "check invisible bp obj exists"
	gdb_test "guile (print (breakpoint-location ibp))" \
	    "scm-breakpoint\.c:$ibp_location*" "check invisible breakpoint location"
	gdb_test "guile (print (breakpoint-visible? ibp))" \
	    "= #f" "check breakpoint invisibility"
	gdb_test "info breakpoints" \
	    "No breakpoints or watchpoints.*" \
	    "check info breakpoints does not show invisible breakpoints"
	gdb_test "maint info breakpoints" \
	    "scm-breakpoint\.c:$ibp_location.*" \
	    "check maint info breakpoints shows invisible breakpoints"
    }
}

proc test_watchpoints { } {
    global srcfile testfile hex decimal

    with_test_prefix test_watchpoints {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	# Disable hardware watchpoints if necessary.
	if [target_info exists gdb,no_hardware_watchpoints] {
	    gdb_test_no_output "set can-use-hw-watchpoints 0" ""
	}
	if ![gdb_guile_runto_main] {
	    return
	}

	gdb_scm_test_silent_cmd  "guile (define wp1 (make-breakpoint \"result\" #:type BP_WATCHPOINT #:wp-class WP_WRITE))" \
	    "create watchpoint"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! wp1)" \
	    "register wp1"
	gdb_test "continue" \
	    ".*\[Ww\]atchpoint.*result.*Old value = 0.*New value = 25.*main.*" \
	    "test watchpoint write"
    }
}

proc test_bkpt_internal { } {
    global srcfile testfile hex decimal

    with_test_prefix test_bkpt_internal {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	# Disable hardware watchpoints if necessary.
	if [target_info exists gdb,no_hardware_watchpoints] {
	    gdb_test_no_output "set can-use-hw-watchpoints 0" ""
	}
	if ![gdb_guile_runto_main] {
	    return
	}

	delete_breakpoints

	gdb_scm_test_silent_cmd  "guile (define wp1 (make-breakpoint \"result\" #:type BP_WATCHPOINT #:wp-class WP_WRITE #:internal #t))" \
	    "create invisible watchpoint"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! wp1)" \
	    "register wp1"
	gdb_test "info breakpoints" \
	    "No breakpoints or watchpoints.*" \
	    "check info breakpoints does not show invisible watchpoint"
	gdb_test "maint info breakpoints" \
	    ".*watchpoint.*result.*" \
	    "check maint info breakpoints shows invisible watchpoint"
	gdb_test "continue" \
	    ".*\[Ww\]atchpoint.*result.*Old value = 0.*New value = 25.*" \
	    "test invisible watchpoint write"
    }
}

proc test_bkpt_eval_funcs { } {
    global srcfile testfile hex decimal

    with_test_prefix test_bkpt_eval_funcs {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	# Disable hardware watchpoints if necessary.
	if [target_info exists gdb,no_hardware_watchpoints] {
	    gdb_test_no_output "set can-use-hw-watchpoints 0" ""
	}
	if ![gdb_guile_runto_main] {
	    return
	}

	delete_breakpoints

	# Define create-breakpoint! as a convenient wrapper around
	# make-breakpoint, register-breakpoint!
	gdb_test_no_output "guile (define (create-breakpoint! . args) (let ((bp (apply make-breakpoint args))) (register-breakpoint! bp) bp))" \
	    "define create-breakpoint!"

	gdb_test_multiline "data collection breakpoint 1" \
	    "guile" "" \
	    "(define (make-bp-data) (cons 0 0))" "" \
	    "(define bp-data-count car)" "" \
	    "(define set-bp-data-count! set-car!)" "" \
	    "(define bp-data-inf-i cdr)" "" \
	    "(define set-bp-data-inf-i! set-cdr!)" "" \
	    "(define (bp-eval-count bkpt) (bp-data-count (object-property bkpt 'bp-data)))" "" \
	    "(define (bp-eval-inf-i bkpt) (bp-data-inf-i (object-property bkpt 'bp-data)))" "" \
	    "(define (make-bp-eval location)" "" \
	    "  (let ((bp (create-breakpoint! location)))" "" \
	    "    (set-object-property! bp 'bp-data (make-bp-data))" "" \
	    "    (set-breakpoint-stop! bp" "" \
	    "       (lambda (bkpt)" "" \
	    "         (let ((data (object-property bkpt 'bp-data))" "" \
	    "               (inf-i (parse-and-eval \"i\")))" "" \
	    "           (set-bp-data-count! data (+ (bp-data-count data) 1))" "" \
	    "           (set-bp-data-inf-i! data inf-i)" "" \
	    "           (value=? inf-i 3))))" "" \
	    "    bp))" "" \
	    "end" ""

	gdb_test_multiline "data collection breakpoint 2" \
	    "guile" "" \
	    "(define (make-bp-also-eval location)" "" \
	    "  (let ((bp (create-breakpoint! location)))" "" \
	    "    (set-object-property! bp 'bp-data (make-bp-data))" "" \
	    "    (set-breakpoint-stop! bp" "" \
	    "       (lambda (bkpt)" "" \
	    "         (let* ((data (object-property bkpt 'bp-data))" "" \
	    "                (count (+ (bp-data-count data) 1)))" "" \
	    "           (set-bp-data-count! data count)" "" \
	    "           (= count 9))))" "" \
	    "    bp))" "" \
	    "end" ""

	gdb_test_multiline "data collection breakpoint 3" \
	    "guile" "" \
	    "(define (make-bp-basic location)" "" \
	    "  (let ((bp (create-breakpoint! location)))" "" \
	    "    (set-object-property! bp 'bp-data (make-bp-data))" "" \
	    "    bp))" "" \
	    "end" ""

	set bp_location2 [gdb_get_line_number "Break at multiply."]
	set end_location [gdb_get_line_number "Break at end."]
	gdb_scm_test_silent_cmd  "guile (define eval-bp1 (make-bp-eval \"$bp_location2\"))" \
	    "create eval-bp1 breakpoint"
	gdb_scm_test_silent_cmd  "guile (define also-eval-bp1 (make-bp-also-eval \"$bp_location2\"))" \
	    "create also-eval-bp1 breakpoint"
	gdb_scm_test_silent_cmd  "guile (define never-eval-bp1 (make-bp-also-eval \"$end_location\"))" \
	    "create never-eval-bp1 breakpoint"
	gdb_continue_to_breakpoint "Break at multiply." ".*$srcfile:$bp_location2.*"
	gdb_test "print i" "3" "check inferior value matches guile accounting"
	gdb_test "guile (print (bp-eval-inf-i eval-bp1))" \
	    "= 3" "check guile accounting matches inferior"
	gdb_test "guile (print (bp-eval-count also-eval-bp1))" \
	    "= 4" \
	    "check non firing same-location breakpoint eval function was also called at each stop 1"
	gdb_test "guile (print (bp-eval-count eval-bp1))" \
	    "= 4" \
	    "check non firing same-location breakpoint eval function was also called at each stop 2"

	# Check we cannot assign a condition to a breakpoint with a stop-func,
	# and cannot assign a stop-func to a breakpoint with a condition.

	delete_breakpoints
	set cond_bp [gdb_get_line_number "Break at multiply."]
	gdb_scm_test_silent_cmd  "guile (define eval-bp1 (make-bp-eval \"$cond_bp\"))" \
	    "create eval-bp1 breakpoint 2"
	set test_cond {cond $bpnum}
	gdb_test "$test_cond \"foo==3\"" \
	    "Only one stop condition allowed.*"
	gdb_scm_test_silent_cmd  "guile (define eval-bp2 (make-bp-basic \"$cond_bp\"))" \
	    "create basic breakpoint"
	gdb_scm_test_silent_cmd  "guile (set-breakpoint-condition! eval-bp2 \"1==1\")" \
	    "set a condition"
	gdb_test_multiline "construct an eval function" \
	    "guile" "" \
	    "(define (stop-func bkpt)" "" \
	    "   return #t)" "" \
	    "end" ""
	gdb_test "guile (set-breakpoint-stop! eval-bp2 stop-func)"  \
	    "Only one stop condition allowed.*"

	# Check that stop-func is run when location has normal bp.

	delete_breakpoints
	gdb_breakpoint [gdb_get_line_number "Break at multiply."]
	gdb_scm_test_silent_cmd  "guile (define check-eval (make-bp-eval \"$bp_location2\"))" \
	    "create check-eval breakpoint"
	gdb_test "guile (print (bp-eval-count check-eval))" \
	    "= 0" \
	    "test that evaluate function has not been yet executed (ie count = 0)"
	gdb_continue_to_breakpoint "Break at multiply." ".*$srcfile:$bp_location2.*"
	gdb_test "guile (print (bp-eval-count check-eval))" \
	    "= 1" \
	    "test that evaluate function is run when location also has normal bp"

	# Test watchpoints with stop-func.

	gdb_test_multiline "watchpoint stop func" \
	    "guile" "" \
	    "(define (make-wp-eval location)" "" \
	    "  (let ((wp (create-breakpoint! location #:type BP_WATCHPOINT #:wp-class WP_WRITE)))" "" \
	    "    (set-breakpoint-stop! wp" "" \
	    "      (lambda (bkpt)" "" \
	    "        (let ((result (parse-and-eval \"result\")))" "" \
	    "          (value=? result 788))))" "" \
	    "    wp))" "" \
	    "end" ""

	delete_breakpoints
	gdb_scm_test_silent_cmd  "guile (define wp1 (make-wp-eval \"result\"))" \
	    "create watchpoint"
	gdb_test "continue" ".*\[Ww\]atchpoint.*result.*Old value =.*New value = 788.*" \
	    "test watchpoint write"

	# Misc final tests.

	gdb_test "guile (print (bp-eval-count never-eval-bp1))" \
	    "= 0" \
	    "check that this unrelated breakpoints eval function was never called"
    }
}

proc test_bkpt_registration {} {
    global srcfile testfile

    with_test_prefix "test_bkpt_registration" {
	# Start with a fresh gdb.
	clean_restart ${testfile}

	if ![gdb_guile_runto_main] {
	    return
	}

	# Initially there should be one breakpoint: main.
	gdb_scm_test_silent_cmd "guile (define blist (breakpoints))" \
	    "get breakpoint list 1"
	gdb_test "guile (register-breakpoint! (car blist))" \
	    "ERROR: .*: not a Scheme breakpoint.*" \
	    "try to register a non-guile breakpoint"

	set bp_location1 [gdb_get_line_number "Break at multiply."]
	gdb_scm_test_silent_cmd  "guile (define bp1 (make-breakpoint \"$bp_location1\"))" \
	    "create multiply breakpoint"
	gdb_test "guile (print (breakpoint-valid? bp1))" \
	    "= #f" "breakpoint invalid after creation"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! bp1)" \
	    "register bp1"
	gdb_test "guile (print (breakpoint-valid? bp1))" \
	    "= #t" "breakpoint valid after registration"
	gdb_test "guile (register-breakpoint! bp1)" \
	    "ERROR: .*: breakpoint is already registered.*" \
	    "re-register already registered bp1"
	gdb_scm_test_silent_cmd "guile (delete-breakpoint! bp1)" \
	    "delete registered breakpoint"
	gdb_test "guile (print (breakpoint-valid? bp1))" \
	    "= #f" "breakpoint invalid after deletion"
	gdb_scm_test_silent_cmd "guile (register-breakpoint! bp1)" \
	    "re-register bp1"
	gdb_test "guile (print (breakpoint-valid? bp1))" \
	    "= #t" "breakpoint valid after re-registration"
    }
}

proc test_bkpt_address {} {
    global decimal srcfile

    # Leading whitespace is intentional!
    gdb_scm_test_silent_cmd \
	"guile (define bp1 (make-breakpoint \"  *multiply\"))" \
	"create address breakpoint a '  *multiply'" 1

    gdb_test "guile (register-breakpoint! bp1)" \
	".*Breakpoint ($decimal)+ at .*$srcfile, line ($decimal)+\."
}

test_bkpt_basic
test_bkpt_deletion
test_bkpt_cond_and_cmds
test_bkpt_invisible
test_watchpoints
test_bkpt_internal
test_bkpt_eval_funcs
test_bkpt_registration
test_bkpt_address