# Copyright 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# This file was written by Elena Zannoni (ezannoni@cygnus.com)

# this file tests command line calls with functions returning structures
# corresponding source file: call_return_struct.c


if $tracelevel then {
        strace $tracelevel
}

set prms_id 0
set bug_id 0

set testfile "call-rt-st"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}


# Test depends on printf, which the sparclet stub doesn't support.  
if { [istarget "sparclet-*-*"] } {
    return 0;
}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
    }


# Create and source the file that provides information about the compiler
# used to compile the test case.

if [get_compiler_info ${binfile}] {
    return -1;
}

# Some targets can't do function calls, so don't even bother with this
# test.
if [target_info exists gdb,cannot_call_functions] {
    setup_xfail "*-*-*" 2416
    fail "This target can not call functions"
    continue
}

# Set the current language to C.  This counts as a test.  If it
# fails, then we skip the other tests.

proc set_lang_c {} {
    global gdb_prompt

    send_gdb "set language c\n"
    gdb_expect {
	-re ".*$gdb_prompt $" {}
	timeout { fail "set language c (timeout)" ; return 0; }
    }

    send_gdb "show language\n"
    gdb_expect {
	-re ".* source language is \"c\".*$gdb_prompt $" {
	    pass "set language to \"c\""
	    return 1
	}
	-re ".*$gdb_prompt $" {
	    fail "setting language to \"c\""
	    return 0
	}
	timeout {
	    fail "can't show language (timeout)"
	    return 0
	}
    }
}


source ${binfile}.ci


# Start with a fresh gdb.

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"


if ![runto_main] then {
    perror "couldn't run to breakpoint"
    continue
}


gdb_test "break loop_count" \
    "Breakpoint.* file .*call-rt-st.c, line 106\\." \
    "breakpoint loop_count"


send_gdb "continue\n"
gdb_expect {
 -re  "Continuing\\..*Breakpoint.*loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+106\[\t \]+for \\(index=0; index.4; index..\\);\[\r\n \]+$gdb_prompt $" {
                 pass "continue to loop_count"}
      -re ".*$gdb_prompt $" { fail "continue to loop_count"}           
      timeout           { fail "(timeout) continue to loop_count"}
}

send_gdb "finish\n"
gdb_expect {
    -re  "Run till exit from .0  loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:617\[ \t\r\n\]+617\[\t \]+return 0;.*$gdb_prompt $" {
	pass "finish out from loop_count (line 617)"
    }
    -re  "Run till exit from .0  loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:615\[ \t\r\n\]+615\[\t \]+loop_count.*$gdb_prompt $" {
	pass "finish out from loop_count (line 615)"
    }
    -re ".*$gdb_prompt $" {
	fail "finish out from loop_count"
    }
    timeout {
	fail "finish out from loop_count (timeout)"
    }
}

# Ask GDB to print the value of EXPR, and expect to see the regexp
# RESULT in the output.  If we get back the error message "Function
# return value unknown", call that an `unsupported' test; on some
# architectures, it's impossible to find structs returned by value
# reliably.
proc print_struct_call { expr result } {
    global gdb_prompt

    set command "print $expr"
    send_gdb "${command}\n"
    gdb_expect {
        -re "$result\[\r\n\]+$gdb_prompt $" {
            pass "$command"
        }
        -re "Function return value unknown.\[\r\n\]+$gdb_prompt $" {
            unsupported "$command"
        }
        -re "$gdb_prompt $" {
            fail "$command"
        }
        timeout {
            fail "$command (timeout)"
        }
    }
}


if ![gdb_skip_stdio_test "print print_struct_rep(*struct1)"] {
    print_struct_call "print_struct_rep(*struct1)" \
            ".*Contents of struct1:\[ \t\n\r\]+22\[ \t\]+0\[ \t\n\r\]+.\[0-9\]+ = \\{value = 5, head = 0\\}"
}

if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
    print_struct_call "print_one_large_struct(*list1)" \
            ".*\[ \t\]+4\[ \t\]+1\[ \r\n\]+.\[0-9\]+ = \\{next_index = \\{1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\}, values = \\{4, 6, 8, 10, 12, 14, 16, 18, 20, 22\\}, head = 0\\}"
}

if {![gdb_skip_float_test "print print_one_double(*d1)"] && \
        ![gdb_skip_stdio_test "print print_one_double(*d1)"] } {
    print_struct_call "print_one_double(*d1)" \
	    ".*Contents of one_double_t:\[ \r\n\]+1\\.111110\[ \r\n\]+.\[0-9\]+ = \\{double1 = 1\\.111\[0-9\]*\\}"
}

if {![gdb_skip_float_test "print print_two_floats(*f3)"] && \
        ![gdb_skip_stdio_test "print print_two_floats(*f3)"] } {
    print_struct_call "print_two_floats(*f3)" \
            ".*Contents of two_floats_t:\[ \r\n\]+-2\\.345000\[ \t]+1\\.000000\[ \r\n\]+.\[0-9\]+ = \\{float1 = -2\\.34500003, float2 = 1\\}"
}

if ![gdb_skip_stdio_test "print print_bit_flags(*flags)"] {
    print_struct_call "print_bit_flags(*flags)" \
            ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+.\[0-9\]+ = \\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\\}"
}

if ![gdb_skip_stdio_test "print print_bit_flags_combo(*flags_combo)"] {
    print_struct_call "print_bit_flags_combo(*flags_combo)" \
            ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+ch1: y\[ \t\]+ch2: n\[ \r\n\]+.\[0-9\]+ = \\{alpha = 1, beta = 0, ch1 = 121 'y', gamma = 1, delta = 0, ch2 = 110 'n', epsilon = 1, omega = 0\\}"
}

if ![gdb_skip_stdio_test "print print_three_chars(*three_chars)"] {
    print_struct_call "print_three_chars(*three_char)" \
            ".*Contents of three_char_t:\[ \r\n\]+x\[ \t\]+y\[ \t\]+z\[ \r\n\]+.\[0-9\]+ = \\{ch1 = 120 'x', ch2 = 121 'y', ch3 = 122 'z'\\}"
}

if ![gdb_skip_stdio_test "print print_five_chars(*five_chars)"] {
    print_struct_call "print_five_chars(*five_char)" \
            ".*Contents of five_char_t:\[ \r\n\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o\[ \r\n\]+.\[0-9\]+ = \\{ch1 = 104 'h', ch2 = 101 'e', ch3 = 108 'l', ch4 = 108 'l', ch5 = 111 'o'\\}"
}

if ![gdb_skip_stdio_test "print print_int_char_combo(*int_char_combo)"] {
    print_struct_call "print_int_char_combo(*int_char_combo)" \
            ".*Contents of int_char_combo_t:\[ \r\n\]+13\[ \t\]+!\[ \r\n\]+.\[0-9\]+ = \\{int1 = 13, ch1 = 33 '!'\\}"
}

return