include/sbsysmem.h - third_party/bcmdhd - Git at Google

 /*
  * SiliconBackplane System Memory core
  *
  * Copyright 1999-2016, Broadcom Corporation
  * All rights reserved,
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *    1. Redistributions of source code must retain the above copyright notice,
  *       this list of conditions and the following disclaimer.
  *    2. Redistributions in binary form must reproduce the above copyright notice,
  *       this list of conditions and the following disclaimer in the documentation
  *       and/or other materials provided with the distribution.
  *
  * This software is provided by the copyright holder "as is" and any express or
  * implied warranties, including, but not limited to, the implied warranties of
  * merchantability and fitness for a particular purpose are disclaimed. In no event
  * shall copyright holder be liable for any direct, indirect, incidental, special,
  * exemplary, or consequential damages (including, but not limited to, procurement
  * of substitute goods or services; loss of use, data, or profits; or business
  * interruption) however caused and on any theory of liability, whether in
  * contract, strict liability, or tort (including negligence or otherwise) arising
  * in any way out of the use of this software, even if advised of the possibility
  * of such damage
  *
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
  * $Id: sbsysmem.h 514727 2014-11-12 03:02:48Z $
  */

 #ifndef	_SBSYSMEM_H
 #define	_SBSYSMEM_H

 #ifndef _LANGUAGE_ASSEMBLY

 /* cpp contortions to concatenate w/arg prescan */
 #ifndef PAD
 #define	_PADLINE(line)	pad ## line
 #define	_XSTR(line)	_PADLINE(line)
 #define	PAD		_XSTR(__LINE__)
 #endif	/* PAD */

 /* sysmem core registers */
 typedef volatile struct sysmemregs {
 	uint32	coreinfo;
 	uint32	bwalloc;
 	uint32	extracoreinfo;
 	uint32	biststat;
 	uint32	bankidx;
 	uint32	standbyctrl;

 	uint32	errlogstatus;
 	uint32	errlogaddr;

 	uint32	cambankidx;
 	uint32	cambankstandbyctrl;
 	uint32	cambankpatchctrl;
 	uint32	cambankpatchtblbaseaddr;
 	uint32	cambankcmdreg;
 	uint32	cambankdatareg;
 	uint32	cambankmaskreg;
 	uint32	PAD[1];
 	uint32	bankinfo;
 	uint32	PAD[15];
 	uint32	extmemconfig;
 	uint32	extmemparitycsr;
 	uint32	extmemparityerrdata;
 	uint32	extmemparityerrcnt;
 	uint32	extmemwrctrlandsize;
 	uint32	PAD[84];
 	uint32	workaround;
 	uint32	pwrctl;
 	uint32	PAD[133];
 	uint32  sr_control;
 	uint32  sr_status;
 	uint32  sr_address;
 	uint32  sr_data;
 } sysmemregs_t;

 #endif	/* _LANGUAGE_ASSEMBLY */

 /* Register offsets */
 #define	SR_COREINFO		0x00
 #define	SR_BWALLOC		0x04
 #define	SR_BISTSTAT		0x0c
 #define	SR_BANKINDEX		0x10
 #define	SR_BANKSTBYCTL		0x14
 #define SR_PWRCTL		0x1e8

 /* Coreinfo register */
 #define	SRCI_PT_MASK		0x00070000	/* port type[18:16] */
 #define	SRCI_PT_SHIFT		16
 /* port types : SRCI_PT_<processorPT>_<backplanePT> */
 #define SRCI_PT_OCP_OCP		0
 #define SRCI_PT_AXI_OCP		1
 #define SRCI_PT_ARM7AHB_OCP	2
 #define SRCI_PT_CM3AHB_OCP	3
 #define SRCI_PT_AXI_AXI		4
 #define SRCI_PT_AHB_AXI		5

 #define SRCI_LSS_MASK		0x00f00000
 #define SRCI_LSS_SHIFT		20
 #define SRCI_LRS_MASK		0x0f000000
 #define SRCI_LRS_SHIFT		24

 /* In corerev 0, the memory size is 2 to the power of the
  * base plus 16 plus to the contents of the memsize field plus 1.
  */
 #define	SRCI_MS0_MASK		0xf
 #define SR_MS0_BASE		16

 /*
  * In corerev 1 the bank size is 2 ^ the bank size field plus 14,
  * the memory size is number of banks times bank size.
  * The same applies to rom size.
  */
 #define	SRCI_ROMNB_MASK		0xf000
 #define	SRCI_ROMNB_SHIFT	12
 #define	SRCI_ROMBSZ_MASK	0xf00
 #define	SRCI_ROMBSZ_SHIFT	8
 #define	SRCI_SRNB_MASK		0xf0
 #define	SRCI_SRNB_SHIFT		4
 #define	SRCI_SRBSZ_MASK		0xf
 #define	SRCI_SRBSZ_SHIFT	0

 #define SR_BSZ_BASE		14

 /* Standby control register */
 #define	SRSC_SBYOVR_MASK	0x80000000
 #define	SRSC_SBYOVR_SHIFT	31
 #define	SRSC_SBYOVRVAL_MASK	0x60000000
 #define	SRSC_SBYOVRVAL_SHIFT	29
 #define	SRSC_SBYEN_MASK		0x01000000
 #define	SRSC_SBYEN_SHIFT	24

 /* Power control register */
 #define SRPC_PMU_STBYDIS_MASK	0x00000010
 #define SRPC_PMU_STBYDIS_SHIFT	4
 #define SRPC_STBYOVRVAL_MASK	0x00000008
 #define SRPC_STBYOVRVAL_SHIFT	3
 #define SRPC_STBYOVR_MASK	0x00000007
 #define SRPC_STBYOVR_SHIFT	0

 /* Extra core capability register */
 #define SRECC_NUM_BANKS_MASK   0x000000F0
 #define SRECC_NUM_BANKS_SHIFT  4
 #define SRECC_BANKSIZE_MASK    0x0000000F
 #define SRECC_BANKSIZE_SHIFT   0

 #define SRECC_BANKSIZE(value)	 (1 << (value))

 /* CAM bank patch control */
 #define SRCBPC_PATCHENABLE 0x80000000

 #define SRP_ADDRESS   0x0001FFFC
 #define SRP_VALID     0x8000

 /* CAM bank command reg */
 #define SRCMD_WRITE  0x00020000
 #define SRCMD_READ   0x00010000
 #define SRCMD_DONE   0x80000000

 #define SRCMD_DONE_DLY	1000

 /* bankidx and bankinfo reg defines */
 #define SYSMEM_BANKINFO_SZMASK		0x7f
 #define SYSMEM_BANKIDX_ROM_MASK		0x100

 #define SYSMEM_BANKIDX_MEMTYPE_SHIFT	8
 /* sysmem bankinfo memtype */
 #define SYSMEM_MEMTYPE_RAM		0
 #define SYSMEM_MEMTYPE_R0M		1
 #define SYSMEM_MEMTYPE_DEVRAM		2

 #define	SYSMEM_BANKINFO_REG		0x40
 #define	SYSMEM_BANKIDX_REG		0x10
 #define	SYSMEM_BANKINFO_STDBY_MASK	0x400
 #define	SYSMEM_BANKINFO_STDBY_TIMER	0x800

 #define SYSMEM_BANKINFO_DEVRAMSEL_SHIFT		13
 #define SYSMEM_BANKINFO_DEVRAMSEL_MASK		0x2000
 #define SYSMEM_BANKINFO_DEVRAMPRO_SHIFT		14
 #define SYSMEM_BANKINFO_DEVRAMPRO_MASK		0x4000
 #define SYSMEM_BANKINFO_SLPSUPP_SHIFT		15
 #define SYSMEM_BANKINFO_SLPSUPP_MASK		0x8000
 #define SYSMEM_BANKINFO_RETNTRAM_SHIFT		16
 #define SYSMEM_BANKINFO_RETNTRAM_MASK		0x00010000
 #define SYSMEM_BANKINFO_PDASZ_SHIFT		17
 #define SYSMEM_BANKINFO_PDASZ_MASK		0x003E0000
 #define SYSMEM_BANKINFO_DEVRAMREMAP_SHIFT	24
 #define SYSMEM_BANKINFO_DEVRAMREMAP_MASK	0x01000000

 /* extracoreinfo register */
 #define SYSMEM_DEVRAMBANK_MASK		0xF000
 #define SYSMEM_DEVRAMBANK_SHIFT		12

 /* bank info to calculate bank size */
 #define	SYSMEM_BANKINFO_SZBASE          8192
 #define SYSMEM_BANKSIZE_SHIFT		13      /* SYSMEM_BANKINFO_SZBASE */

 #endif	/* _SBSYSMEM_H */
	/*
	* SiliconBackplane System Memory core
	*
	* Copyright 1999-2016, Broadcom Corporation
	* All rights reserved,
	*
	* Redistribution and use in source and binary forms, with or without modification,
	* are permitted provided that the following conditions are met:
	* 1. Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* This software is provided by the copyright holder "as is" and any express or
	* implied warranties, including, but not limited to, the implied warranties of
	* merchantability and fitness for a particular purpose are disclaimed. In no event
	* shall copyright holder be liable for any direct, indirect, incidental, special,
	* exemplary, or consequential damages (including, but not limited to, procurement
	* of substitute goods or services; loss of use, data, or profits; or business
	* interruption) however caused and on any theory of liability, whether in
	* contract, strict liability, or tort (including negligence or otherwise) arising
	* in any way out of the use of this software, even if advised of the possibility
	* of such damage
	*
	*
	* <<Broadcom-WL-IPTag/Open:>>
	*
	* $Id: sbsysmem.h 514727 2014-11-12 03:02:48Z $
	*/

	#ifndef _SBSYSMEM_H
	#define _SBSYSMEM_H

	#ifndef _LANGUAGE_ASSEMBLY

	/* cpp contortions to concatenate w/arg prescan */
	#ifndef PAD
	#define _PADLINE(line) pad ## line
	#define _XSTR(line) _PADLINE(line)
	#define PAD _XSTR(__LINE__)
	#endif /* PAD */

	/* sysmem core registers */
	typedef volatile struct sysmemregs {
	uint32 coreinfo;
	uint32 bwalloc;
	uint32 extracoreinfo;
	uint32 biststat;
	uint32 bankidx;
	uint32 standbyctrl;

	uint32 errlogstatus;
	uint32 errlogaddr;

	uint32 cambankidx;
	uint32 cambankstandbyctrl;
	uint32 cambankpatchctrl;
	uint32 cambankpatchtblbaseaddr;
	uint32 cambankcmdreg;
	uint32 cambankdatareg;
	uint32 cambankmaskreg;
	uint32 PAD[1];
	uint32 bankinfo;
	uint32 PAD[15];
	uint32 extmemconfig;
	uint32 extmemparitycsr;
	uint32 extmemparityerrdata;
	uint32 extmemparityerrcnt;
	uint32 extmemwrctrlandsize;
	uint32 PAD[84];
	uint32 workaround;
	uint32 pwrctl;
	uint32 PAD[133];
	uint32 sr_control;
	uint32 sr_status;
	uint32 sr_address;
	uint32 sr_data;
	} sysmemregs_t;

	#endif /* _LANGUAGE_ASSEMBLY */

	/* Register offsets */
	#define SR_COREINFO 0x00
	#define SR_BWALLOC 0x04
	#define SR_BISTSTAT 0x0c
	#define SR_BANKINDEX 0x10
	#define SR_BANKSTBYCTL 0x14
	#define SR_PWRCTL 0x1e8

	/* Coreinfo register */
	#define SRCI_PT_MASK 0x00070000 /* port type[18:16] */
	#define SRCI_PT_SHIFT 16
	/* port types : SRCI_PT_<processorPT>_<backplanePT> */
	#define SRCI_PT_OCP_OCP 0
	#define SRCI_PT_AXI_OCP 1
	#define SRCI_PT_ARM7AHB_OCP 2
	#define SRCI_PT_CM3AHB_OCP 3
	#define SRCI_PT_AXI_AXI 4
	#define SRCI_PT_AHB_AXI 5

	#define SRCI_LSS_MASK 0x00f00000
	#define SRCI_LSS_SHIFT 20
	#define SRCI_LRS_MASK 0x0f000000
	#define SRCI_LRS_SHIFT 24

	/* In corerev 0, the memory size is 2 to the power of the
	* base plus 16 plus to the contents of the memsize field plus 1.
	*/
	#define SRCI_MS0_MASK 0xf
	#define SR_MS0_BASE 16

	/*
	* In corerev 1 the bank size is 2 ^ the bank size field plus 14,
	* the memory size is number of banks times bank size.
	* The same applies to rom size.
	*/
	#define SRCI_ROMNB_MASK 0xf000
	#define SRCI_ROMNB_SHIFT 12
	#define SRCI_ROMBSZ_MASK 0xf00
	#define SRCI_ROMBSZ_SHIFT 8
	#define SRCI_SRNB_MASK 0xf0
	#define SRCI_SRNB_SHIFT 4
	#define SRCI_SRBSZ_MASK 0xf
	#define SRCI_SRBSZ_SHIFT 0

	#define SR_BSZ_BASE 14

	/* Standby control register */
	#define SRSC_SBYOVR_MASK 0x80000000
	#define SRSC_SBYOVR_SHIFT 31
	#define SRSC_SBYOVRVAL_MASK 0x60000000
	#define SRSC_SBYOVRVAL_SHIFT 29
	#define SRSC_SBYEN_MASK 0x01000000
	#define SRSC_SBYEN_SHIFT 24

	/* Power control register */
	#define SRPC_PMU_STBYDIS_MASK 0x00000010
	#define SRPC_PMU_STBYDIS_SHIFT 4
	#define SRPC_STBYOVRVAL_MASK 0x00000008
	#define SRPC_STBYOVRVAL_SHIFT 3
	#define SRPC_STBYOVR_MASK 0x00000007
	#define SRPC_STBYOVR_SHIFT 0

	/* Extra core capability register */
	#define SRECC_NUM_BANKS_MASK 0x000000F0
	#define SRECC_NUM_BANKS_SHIFT 4
	#define SRECC_BANKSIZE_MASK 0x0000000F
	#define SRECC_BANKSIZE_SHIFT 0

	#define SRECC_BANKSIZE(value) (1 << (value))

	/* CAM bank patch control */
	#define SRCBPC_PATCHENABLE 0x80000000

	#define SRP_ADDRESS 0x0001FFFC
	#define SRP_VALID 0x8000

	/* CAM bank command reg */
	#define SRCMD_WRITE 0x00020000
	#define SRCMD_READ 0x00010000
	#define SRCMD_DONE 0x80000000

	#define SRCMD_DONE_DLY 1000

	/* bankidx and bankinfo reg defines */
	#define SYSMEM_BANKINFO_SZMASK 0x7f
	#define SYSMEM_BANKIDX_ROM_MASK 0x100

	#define SYSMEM_BANKIDX_MEMTYPE_SHIFT 8
	/* sysmem bankinfo memtype */
	#define SYSMEM_MEMTYPE_RAM 0
	#define SYSMEM_MEMTYPE_R0M 1
	#define SYSMEM_MEMTYPE_DEVRAM 2

	#define SYSMEM_BANKINFO_REG 0x40
	#define SYSMEM_BANKIDX_REG 0x10
	#define SYSMEM_BANKINFO_STDBY_MASK 0x400
	#define SYSMEM_BANKINFO_STDBY_TIMER 0x800

	#define SYSMEM_BANKINFO_DEVRAMSEL_SHIFT 13
	#define SYSMEM_BANKINFO_DEVRAMSEL_MASK 0x2000
	#define SYSMEM_BANKINFO_DEVRAMPRO_SHIFT 14
	#define SYSMEM_BANKINFO_DEVRAMPRO_MASK 0x4000
	#define SYSMEM_BANKINFO_SLPSUPP_SHIFT 15
	#define SYSMEM_BANKINFO_SLPSUPP_MASK 0x8000
	#define SYSMEM_BANKINFO_RETNTRAM_SHIFT 16
	#define SYSMEM_BANKINFO_RETNTRAM_MASK 0x00010000
	#define SYSMEM_BANKINFO_PDASZ_SHIFT 17
	#define SYSMEM_BANKINFO_PDASZ_MASK 0x003E0000
	#define SYSMEM_BANKINFO_DEVRAMREMAP_SHIFT 24
	#define SYSMEM_BANKINFO_DEVRAMREMAP_MASK 0x01000000

	/* extracoreinfo register */
	#define SYSMEM_DEVRAMBANK_MASK 0xF000
	#define SYSMEM_DEVRAMBANK_SHIFT 12

	/* bank info to calculate bank size */
	#define SYSMEM_BANKINFO_SZBASE 8192
	#define SYSMEM_BANKSIZE_SHIFT 13 /* SYSMEM_BANKINFO_SZBASE */

	#endif /* _SBSYSMEM_H */