/*
 * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
 *
 * Copyright 1999-2016, Broadcom Corporation
 * All rights reserved,
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *    1. Redistributions of source code must retain the above copyright notice,
 *       this list of conditions and the following disclaimer.
 *    2. Redistributions in binary form must reproduce the above copyright notice,
 *       this list of conditions and the following disclaimer in the documentation
 *       and/or other materials provided with the distribution.
 *
 * This software is provided by the copyright holder "as is" and any express or
 * implied warranties, including, but not limited to, the implied warranties of
 * merchantability and fitness for a particular purpose are disclaimed. In no event
 * shall copyright holder be liable for any direct, indirect, incidental, special,
 * exemplary, or consequential damages (including, but not limited to, procurement
 * of substitute goods or services; loss of use, data, or profits; or business
 * interruption) however caused and on any theory of liability, whether in
 * contract, strict liability, or tort (including negligence or otherwise) arising
 * in any way out of the use of this software, even if advised of the possibility
 * of such damage
 *
 *
 * <<Broadcom-WL-IPTag/Open:>>
 *
 * $Id: sbpcmcia.h 521344 2014-12-17 10:03:55Z $
 */

#ifndef	_SBPCMCIA_H
#define	_SBPCMCIA_H

/* All the addresses that are offsets in attribute space are divided
 * by two to account for the fact that odd bytes are invalid in
 * attribute space and our read/write routines make the space appear
 * as if they didn't exist. Still we want to show the original numbers
 * as documented in the hnd_pcmcia core manual.
 */

/* PCMCIA Function Configuration Registers */
#define	PCMCIA_FCR		(0x700 / 2)

#define	FCR0_OFF		0
#define	FCR1_OFF		(0x40 / 2)
#define	FCR2_OFF		(0x80 / 2)
#define	FCR3_OFF		(0xc0 / 2)

#define	PCMCIA_FCR0		(0x700 / 2)
#define	PCMCIA_FCR1		(0x740 / 2)
#define	PCMCIA_FCR2		(0x780 / 2)
#define	PCMCIA_FCR3		(0x7c0 / 2)

/* Standard PCMCIA FCR registers */

#define	PCMCIA_COR		0

#define	COR_RST			0x80
#define	COR_LEV			0x40
#define	COR_IRQEN		0x04
#define	COR_BLREN		0x01
#define	COR_FUNEN		0x01


#define	PCICIA_FCSR		(2 / 2)
#define	PCICIA_PRR		(4 / 2)
#define	PCICIA_SCR		(6 / 2)
#define	PCICIA_ESR		(8 / 2)


#define PCM_MEMOFF		0x0000
#define F0_MEMOFF		0x1000
#define F1_MEMOFF		0x2000
#define F2_MEMOFF		0x3000
#define F3_MEMOFF		0x4000

/* Memory base in the function fcr's */
#define MEM_ADDR0		(0x728 / 2)
#define MEM_ADDR1		(0x72a / 2)
#define MEM_ADDR2		(0x72c / 2)

/* PCMCIA base plus Srom access in fcr0: */
#define PCMCIA_ADDR0		(0x072e / 2)
#define PCMCIA_ADDR1		(0x0730 / 2)
#define PCMCIA_ADDR2		(0x0732 / 2)

#define MEM_SEG			(0x0734 / 2)
#define SROM_CS			(0x0736 / 2)
#define SROM_DATAL		(0x0738 / 2)
#define SROM_DATAH		(0x073a / 2)
#define SROM_ADDRL		(0x073c / 2)
#define SROM_ADDRH		(0x073e / 2)
#define	SROM_INFO2		(0x0772 / 2)	/* Corerev >= 2 && <= 5 */
#define	SROM_INFO		(0x07be / 2)	/* Corerev >= 6 */

/*  Values for srom_cs: */
#define SROM_IDLE		0
#define SROM_WRITE		1
#define SROM_READ		2
#define SROM_WEN		4
#define SROM_WDS		7
#define SROM_DONE		8

/* Fields in srom_info: */
#define	SRI_SZ_MASK		0x03
#define	SRI_BLANK		0x04
#define	SRI_OTP			0x80


/* sbtmstatelow */
#define SBTML_INT_ACK		0x40000		/* ack the sb interrupt */
#define SBTML_INT_EN		0x20000		/* enable sb interrupt */

/* sbtmstatehigh */
#define SBTMH_INT_STATUS	0x40000		/* sb interrupt status */

#endif	/* _SBPCMCIA_H */