blob: bc65d55d42415c6d464b9af3f41ae4facb712f52 [file] [log] [blame]
/*
* BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
*
* Copyright 1999-2016, Broadcom Corporation
* All rights reserved,
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* This software is provided by the copyright holder "as is" and any express or
* implied warranties, including, but not limited to, the implied warranties of
* merchantability and fitness for a particular purpose are disclaimed. In no event
* shall copyright holder be liable for any direct, indirect, incidental, special,
* exemplary, or consequential damages (including, but not limited to, procurement
* of substitute goods or services; loss of use, data, or profits; or business
* interruption) however caused and on any theory of liability, whether in
* contract, strict liability, or tort (including negligence or otherwise) arising
* in any way out of the use of this software, even if advised of the possibility
* of such damage
*
*
* <<Broadcom-WL-IPTag/Open:>>
*
* $Id: sbpcmcia.h 521344 2014-12-17 10:03:55Z $
*/
#ifndef _SBPCMCIA_H
#define _SBPCMCIA_H
/* All the addresses that are offsets in attribute space are divided
* by two to account for the fact that odd bytes are invalid in
* attribute space and our read/write routines make the space appear
* as if they didn't exist. Still we want to show the original numbers
* as documented in the hnd_pcmcia core manual.
*/
/* PCMCIA Function Configuration Registers */
#define PCMCIA_FCR (0x700 / 2)
#define FCR0_OFF 0
#define FCR1_OFF (0x40 / 2)
#define FCR2_OFF (0x80 / 2)
#define FCR3_OFF (0xc0 / 2)
#define PCMCIA_FCR0 (0x700 / 2)
#define PCMCIA_FCR1 (0x740 / 2)
#define PCMCIA_FCR2 (0x780 / 2)
#define PCMCIA_FCR3 (0x7c0 / 2)
/* Standard PCMCIA FCR registers */
#define PCMCIA_COR 0
#define COR_RST 0x80
#define COR_LEV 0x40
#define COR_IRQEN 0x04
#define COR_BLREN 0x01
#define COR_FUNEN 0x01
#define PCICIA_FCSR (2 / 2)
#define PCICIA_PRR (4 / 2)
#define PCICIA_SCR (6 / 2)
#define PCICIA_ESR (8 / 2)
#define PCM_MEMOFF 0x0000
#define F0_MEMOFF 0x1000
#define F1_MEMOFF 0x2000
#define F2_MEMOFF 0x3000
#define F3_MEMOFF 0x4000
/* Memory base in the function fcr's */
#define MEM_ADDR0 (0x728 / 2)
#define MEM_ADDR1 (0x72a / 2)
#define MEM_ADDR2 (0x72c / 2)
/* PCMCIA base plus Srom access in fcr0: */
#define PCMCIA_ADDR0 (0x072e / 2)
#define PCMCIA_ADDR1 (0x0730 / 2)
#define PCMCIA_ADDR2 (0x0732 / 2)
#define MEM_SEG (0x0734 / 2)
#define SROM_CS (0x0736 / 2)
#define SROM_DATAL (0x0738 / 2)
#define SROM_DATAH (0x073a / 2)
#define SROM_ADDRL (0x073c / 2)
#define SROM_ADDRH (0x073e / 2)
#define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */
#define SROM_INFO (0x07be / 2) /* Corerev >= 6 */
/* Values for srom_cs: */
#define SROM_IDLE 0
#define SROM_WRITE 1
#define SROM_READ 2
#define SROM_WEN 4
#define SROM_WDS 7
#define SROM_DONE 8
/* Fields in srom_info: */
#define SRI_SZ_MASK 0x03
#define SRI_BLANK 0x04
#define SRI_OTP 0x80
/* sbtmstatelow */
#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
/* sbtmstatehigh */
#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
#endif /* _SBPCMCIA_H */