/*
 * Definitions for ioctls to access DHD iovars.
 * Based on wlioctl.h (for Broadcom 802.11abg driver).
 * (Moves towards generic ioctls for BCM drivers/iovars.)
 *
 * Definitions subject to change without notice.
 *
 * Copyright 1999-2016, Broadcom Corporation
 * All rights reserved,
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *    1. Redistributions of source code must retain the above copyright notice,
 *       this list of conditions and the following disclaimer.
 *    2. Redistributions in binary form must reproduce the above copyright notice,
 *       this list of conditions and the following disclaimer in the documentation
 *       and/or other materials provided with the distribution.
 *
 * This software is provided by the copyright holder "as is" and any express or
 * implied warranties, including, but not limited to, the implied warranties of
 * merchantability and fitness for a particular purpose are disclaimed. In no event
 * shall copyright holder be liable for any direct, indirect, incidental, special,
 * exemplary, or consequential damages (including, but not limited to, procurement
 * of substitute goods or services; loss of use, data, or profits; or business
 * interruption) however caused and on any theory of liability, whether in
 * contract, strict liability, or tort (including negligence or otherwise) arising
 * in any way out of the use of this software, even if advised of the possibility
 * of such damage
 *
 *
 * <<Broadcom-WL-IPTag/Open:>>
 *
 * $Id: dhdioctl.h 585723 2015-09-11 06:26:37Z $
 */

#ifndef _dhdioctl_h_
#define	_dhdioctl_h_

#include <typedefs.h>


/* require default structure packing */
#define BWL_DEFAULT_PACKING
#include <packed_section_start.h>


/* Linux network driver ioctl encoding */
typedef struct dhd_ioctl {
	uint cmd;	/* common ioctl definition */
	void *buf;	/* pointer to user buffer */
	uint len;	/* length of user buffer */
	bool set;	/* get or set request (optional) */
	uint used;	/* bytes read or written (optional) */
	uint needed;	/* bytes needed (optional) */
	uint driver;	/* to identify target driver */
} dhd_ioctl_t;

/* Underlying BUS definition */
enum {
	BUS_TYPE_USB = 0, /* for USB dongles */
	BUS_TYPE_SDIO, /* for SDIO dongles */
	BUS_TYPE_PCIE /* for PCIE dongles */
};

/* per-driver magic numbers */
#define DHD_IOCTL_MAGIC		0x00444944

/* bump this number if you change the ioctl interface */
#define DHD_IOCTL_VERSION	1

#define	DHD_IOCTL_MAXLEN	8192		/* max length ioctl buffer required */
#define	DHD_IOCTL_SMLEN		256		/* "small" length ioctl buffer required */

/* common ioctl definitions */
#define DHD_GET_MAGIC				0
#define DHD_GET_VERSION				1
#define DHD_GET_VAR				2
#define DHD_SET_VAR				3

/* message levels */
#define DHD_ERROR_VAL	0x0001
#define DHD_TRACE_VAL	0x0002
#define DHD_INFO_VAL	0x0004
#define DHD_DATA_VAL	0x0008
#define DHD_CTL_VAL	0x0010
#define DHD_TIMER_VAL	0x0020
#define DHD_HDRS_VAL	0x0040
#define DHD_BYTES_VAL	0x0080
#define DHD_INTR_VAL	0x0100
#define DHD_LOG_VAL	0x0200
#define DHD_GLOM_VAL	0x0400
#define DHD_EVENT_VAL	0x0800
#define DHD_BTA_VAL	0x1000
#define DHD_ISCAN_VAL	0x2000
#define DHD_ARPOE_VAL	0x4000
#define DHD_REORDER_VAL	0x8000
#define DHD_NOCHECKDIED_VAL		0x20000 /* UTF WAR */
#define DHD_PNO_VAL		0x80000
#define DHD_MSGTRACE_VAL	0x100000
#define DHD_FWLOG_VAL		0x400000
#define DHD_RTT_VAL		0x200000
#define DHD_IOV_INFO_VAL	0x800000
#define DHD_ANDROID_VAL	0x10000
#define DHD_IW_VAL	0x20000
#define DHD_CFG_VAL	0x40000
#define DHD_CONFIG_VAL	0x80000

#ifdef SDTEST
/* For pktgen iovar */
typedef struct dhd_pktgen {
	uint version;		/* To allow structure change tracking */
	uint freq;		/* Max ticks between tx/rx attempts */
	uint count;		/* Test packets to send/rcv each attempt */
	uint print;		/* Print counts every <print> attempts */
	uint total;		/* Total packets (or bursts) */
	uint minlen;		/* Minimum length of packets to send */
	uint maxlen;		/* Maximum length of packets to send */
	uint numsent;		/* Count of test packets sent */
	uint numrcvd;		/* Count of test packets received */
	uint numfail;		/* Count of test send failures */
	uint mode;		/* Test mode (type of test packets) */
	uint stop;		/* Stop after this many tx failures */
} dhd_pktgen_t;

/* Version in case structure changes */
#define DHD_PKTGEN_VERSION 2

/* Type of test packets to use */
#define DHD_PKTGEN_ECHO		1 /* Send echo requests */
#define DHD_PKTGEN_SEND 	2 /* Send discard packets */
#define DHD_PKTGEN_RXBURST	3 /* Request dongle send N packets */
#define DHD_PKTGEN_RECV		4 /* Continuous rx from continuous tx dongle */
#endif /* SDTEST */

/* Enter idle immediately (no timeout) */
#define DHD_IDLE_IMMEDIATE	(-1)

/* Values for idleclock iovar: other values are the sd_divisor to use when idle */
#define DHD_IDLE_ACTIVE	0	/* Do not request any SD clock change when idle */
#define DHD_IDLE_STOP   (-1)	/* Request SD clock be stopped (and use SD1 mode) */


/* require default structure packing */
#include <packed_section_end.h>

#endif /* _dhdioctl_h_ */