blob: d4f334baff38e67712b339e4a3f3a4976adda314 [file] [log] [blame]
/*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// Functionality for launching and managing shell subprocesses.
//
// There are two types of subprocesses, PTY or raw. PTY is typically used for
// an interactive session, raw for non-interactive. There are also two methods
// of communication with the subprocess, passing raw data or using a simple
// protocol to wrap packets. The protocol allows separating stdout/stderr and
// passing the exit code back, but is not backwards compatible.
// ----------------+--------------------------------------
// Type Protocol | Exit code? Separate stdout/stderr?
// ----------------+--------------------------------------
// PTY No | No No
// Raw No | No No
// PTY Yes | Yes No
// Raw Yes | Yes Yes
// ----------------+--------------------------------------
//
// Non-protocol subprocesses work by passing subprocess stdin/out/err through
// a single pipe which is registered with a local socket in adbd. The local
// socket uses the fdevent loop to pass raw data between this pipe and the
// transport, which then passes data back to the adb client. Cleanup is done by
// waiting in a separate thread for the subprocesses to exit and then signaling
// a separate fdevent to close out the local socket from the main loop.
//
// ------------------+-------------------------+------------------------------
// Subprocess | adbd subprocess thread | adbd main fdevent loop
// ------------------+-------------------------+------------------------------
// | |
// stdin/out/err <-----------------------------> LocalSocket
// | | |
// | | Block on exit |
// | | * |
// v | * |
// Exit ---> Unblock |
// | | |
// | v |
// | Notify shell exit FD ---> Close LocalSocket
// ------------------+-------------------------+------------------------------
//
// The protocol requires the thread to intercept stdin/out/err in order to
// wrap/unwrap data with shell protocol packets.
//
// ------------------+-------------------------+------------------------------
// Subprocess | adbd subprocess thread | adbd main fdevent loop
// ------------------+-------------------------+------------------------------
// | |
// stdin/out <---> Protocol <---> LocalSocket
// stderr ---> Protocol ---> LocalSocket
// | | |
// v | |
// Exit ---> Exit code protocol ---> LocalSocket
// | | |
// | v |
// | Notify shell exit FD ---> Close LocalSocket
// ------------------+-------------------------+------------------------------
//
// An alternate approach is to put the protocol wrapping/unwrapping in the main
// fdevent loop, which has the advantage of being able to re-use the existing
// select() code for handling data streams. However, implementation turned out
// to be more complex due to partial reads and non-blocking I/O so this model
// was chosen instead.
#define TRACE_TAG SHELL
#include "sysdeps.h"
#include "shell_service.h"
#include <errno.h>
#include <paths.h>
#include <pty.h>
#include <pwd.h>
#include <sys/select.h>
#include <termios.h>
#include <memory>
#include <string>
#include <unordered_map>
#include <vector>
#include <android-base/logging.h>
#include <android-base/stringprintf.h>
#include <private/android_logger.h>
#include "adb.h"
#include "adb_io.h"
#include "adb_trace.h"
#include "adb_unique_fd.h"
#include "adb_utils.h"
#include "security_log_tags.h"
namespace {
// Reads from |fd| until close or failure.
std::string ReadAll(int fd) {
char buffer[512];
std::string received;
while (1) {
int bytes = adb_read(fd, buffer, sizeof(buffer));
if (bytes <= 0) {
break;
}
received.append(buffer, bytes);
}
return received;
}
// Creates a socketpair and saves the endpoints to |fd1| and |fd2|.
bool CreateSocketpair(unique_fd* fd1, unique_fd* fd2) {
int sockets[2];
if (adb_socketpair(sockets) < 0) {
PLOG(ERROR) << "cannot create socket pair";
return false;
}
fd1->reset(sockets[0]);
fd2->reset(sockets[1]);
return true;
}
class Subprocess {
public:
Subprocess(const std::string& command, const char* terminal_type,
SubprocessType type, SubprocessProtocol protocol);
~Subprocess();
const std::string& command() const { return command_; }
int ReleaseLocalSocket() { return local_socket_sfd_.release(); }
pid_t pid() const { return pid_; }
// Sets up FDs, forks a subprocess, starts the subprocess manager thread,
// and exec's the child. Returns false and sets error on failure.
bool ForkAndExec(std::string* _Nonnull error);
// Start the subprocess manager thread. Consumes the subprocess, regardless of success.
// Returns false and sets error on failure.
static bool StartThread(std::unique_ptr<Subprocess> subprocess,
std::string* _Nonnull error);
private:
// Opens the file at |pts_name|.
int OpenPtyChildFd(const char* pts_name, unique_fd* error_sfd);
static void ThreadHandler(void* userdata);
void PassDataStreams();
void WaitForExit();
unique_fd* SelectLoop(fd_set* master_read_set_ptr,
fd_set* master_write_set_ptr);
// Input/output stream handlers. Success returns nullptr, failure returns
// a pointer to the failed FD.
unique_fd* PassInput();
unique_fd* PassOutput(unique_fd* sfd, ShellProtocol::Id id);
const std::string command_;
const std::string terminal_type_;
bool make_pty_raw_ = false;
SubprocessType type_;
SubprocessProtocol protocol_;
pid_t pid_ = -1;
unique_fd local_socket_sfd_;
// Shell protocol variables.
unique_fd stdinout_sfd_, stderr_sfd_, protocol_sfd_;
std::unique_ptr<ShellProtocol> input_, output_;
size_t input_bytes_left_ = 0;
DISALLOW_COPY_AND_ASSIGN(Subprocess);
};
Subprocess::Subprocess(const std::string& command, const char* terminal_type,
SubprocessType type, SubprocessProtocol protocol)
: command_(command),
terminal_type_(terminal_type ? terminal_type : ""),
type_(type),
protocol_(protocol) {
// If we aren't using the shell protocol we must allocate a PTY to properly close the
// subprocess. PTYs automatically send SIGHUP to the slave-side process when the master side
// of the PTY closes, which we rely on. If we use a raw pipe, processes that don't read/write,
// e.g. screenrecord, will never notice the broken pipe and terminate.
// The shell protocol doesn't require a PTY because it's always monitoring the local socket FD
// with select() and will send SIGHUP manually to the child process.
if (protocol_ == SubprocessProtocol::kNone && type_ == SubprocessType::kRaw) {
// Disable PTY input/output processing since the client is expecting raw data.
D("Can't create raw subprocess without shell protocol, using PTY in raw mode instead");
type_ = SubprocessType::kPty;
make_pty_raw_ = true;
}
}
Subprocess::~Subprocess() {
WaitForExit();
}
bool Subprocess::ForkAndExec(std::string* error) {
unique_fd child_stdinout_sfd, child_stderr_sfd;
unique_fd parent_error_sfd, child_error_sfd;
char pts_name[PATH_MAX];
if (command_.empty()) {
__android_log_security_bswrite(SEC_TAG_ADB_SHELL_INTERACTIVE, "");
} else {
__android_log_security_bswrite(SEC_TAG_ADB_SHELL_CMD, command_.c_str());
}
// Create a socketpair for the fork() child to report any errors back to the parent. Since we
// use threads, logging directly from the child might deadlock due to locks held in another
// thread during the fork.
if (!CreateSocketpair(&parent_error_sfd, &child_error_sfd)) {
*error = android::base::StringPrintf(
"failed to create pipe for subprocess error reporting: %s", strerror(errno));
return false;
}
// Construct the environment for the child before we fork.
passwd* pw = getpwuid(getuid());
std::unordered_map<std::string, std::string> env;
if (environ) {
char** current = environ;
while (char* env_cstr = *current++) {
std::string env_string = env_cstr;
char* delimiter = strchr(&env_string[0], '=');
// Drop any values that don't contain '='.
if (delimiter) {
*delimiter++ = '\0';
env[env_string.c_str()] = delimiter;
}
}
}
if (pw != nullptr) {
// TODO: $HOSTNAME? Normally bash automatically sets that, but mksh doesn't.
env["HOME"] = pw->pw_dir;
env["LOGNAME"] = pw->pw_name;
env["USER"] = pw->pw_name;
env["SHELL"] = pw->pw_shell;
}
if (!terminal_type_.empty()) {
env["TERM"] = terminal_type_;
}
std::vector<std::string> joined_env;
for (auto it : env) {
const char* key = it.first.c_str();
const char* value = it.second.c_str();
joined_env.push_back(android::base::StringPrintf("%s=%s", key, value));
}
std::vector<const char*> cenv;
for (const std::string& str : joined_env) {
cenv.push_back(str.c_str());
}
cenv.push_back(nullptr);
if (type_ == SubprocessType::kPty) {
int fd;
pid_ = forkpty(&fd, pts_name, nullptr, nullptr);
if (pid_ > 0) {
stdinout_sfd_.reset(fd);
}
} else {
if (!CreateSocketpair(&stdinout_sfd_, &child_stdinout_sfd)) {
*error = android::base::StringPrintf("failed to create socketpair for stdin/out: %s",
strerror(errno));
return false;
}
// Raw subprocess + shell protocol allows for splitting stderr.
if (protocol_ == SubprocessProtocol::kShell &&
!CreateSocketpair(&stderr_sfd_, &child_stderr_sfd)) {
*error = android::base::StringPrintf("failed to create socketpair for stderr: %s",
strerror(errno));
return false;
}
pid_ = fork();
}
if (pid_ == -1) {
*error = android::base::StringPrintf("fork failed: %s", strerror(errno));
return false;
}
if (pid_ == 0) {
// Subprocess child.
setsid();
if (type_ == SubprocessType::kPty) {
child_stdinout_sfd.reset(OpenPtyChildFd(pts_name, &child_error_sfd));
}
dup2(child_stdinout_sfd, STDIN_FILENO);
dup2(child_stdinout_sfd, STDOUT_FILENO);
dup2(child_stderr_sfd != -1 ? child_stderr_sfd : child_stdinout_sfd, STDERR_FILENO);
// exec doesn't trigger destructors, close the FDs manually.
stdinout_sfd_.reset(-1);
stderr_sfd_.reset(-1);
child_stdinout_sfd.reset(-1);
child_stderr_sfd.reset(-1);
parent_error_sfd.reset(-1);
close_on_exec(child_error_sfd);
// adbd sets SIGPIPE to SIG_IGN to get EPIPE instead, and Linux propagates that to child
// processes, so we need to manually reset back to SIG_DFL here (http://b/35209888).
signal(SIGPIPE, SIG_DFL);
if (command_.empty()) {
execle(_PATH_BSHELL, _PATH_BSHELL, "-", nullptr, cenv.data());
} else {
execle(_PATH_BSHELL, _PATH_BSHELL, "-c", command_.c_str(), nullptr, cenv.data());
}
WriteFdExactly(child_error_sfd, "exec '" _PATH_BSHELL "' failed: ");
WriteFdExactly(child_error_sfd, strerror(errno));
child_error_sfd.reset(-1);
_Exit(1);
}
// Subprocess parent.
D("subprocess parent: stdin/stdout FD = %d, stderr FD = %d",
stdinout_sfd_.get(), stderr_sfd_.get());
// Wait to make sure the subprocess exec'd without error.
child_error_sfd.reset(-1);
std::string error_message = ReadAll(parent_error_sfd);
if (!error_message.empty()) {
*error = error_message;
return false;
}
D("subprocess parent: exec completed");
if (protocol_ == SubprocessProtocol::kNone) {
// No protocol: all streams pass through the stdinout FD and hook
// directly into the local socket for raw data transfer.
local_socket_sfd_.reset(stdinout_sfd_.release());
} else {
// Shell protocol: create another socketpair to intercept data.
if (!CreateSocketpair(&protocol_sfd_, &local_socket_sfd_)) {
*error = android::base::StringPrintf(
"failed to create socketpair to intercept data: %s", strerror(errno));
kill(pid_, SIGKILL);
return false;
}
D("protocol FD = %d", protocol_sfd_.get());
input_.reset(new ShellProtocol(protocol_sfd_));
output_.reset(new ShellProtocol(protocol_sfd_));
if (!input_ || !output_) {
*error = "failed to allocate shell protocol objects";
kill(pid_, SIGKILL);
return false;
}
// Don't let reads/writes to the subprocess block our thread. This isn't
// likely but could happen under unusual circumstances, such as if we
// write a ton of data to stdin but the subprocess never reads it and
// the pipe fills up.
for (int fd : {stdinout_sfd_.get(), stderr_sfd_.get()}) {
if (fd >= 0) {
if (!set_file_block_mode(fd, false)) {
*error = android::base::StringPrintf(
"failed to set non-blocking mode for fd %d", fd);
kill(pid_, SIGKILL);
return false;
}
}
}
}
D("subprocess parent: completed");
return true;
}
bool Subprocess::StartThread(std::unique_ptr<Subprocess> subprocess, std::string* error) {
Subprocess* raw = subprocess.release();
if (!adb_thread_create(ThreadHandler, raw)) {
*error =
android::base::StringPrintf("failed to create subprocess thread: %s", strerror(errno));
kill(raw->pid_, SIGKILL);
return false;
}
return true;
}
int Subprocess::OpenPtyChildFd(const char* pts_name, unique_fd* error_sfd) {
int child_fd = adb_open(pts_name, O_RDWR | O_CLOEXEC);
if (child_fd == -1) {
// Don't use WriteFdFmt; since we're in the fork() child we don't want
// to allocate any heap memory to avoid race conditions.
const char* messages[] = {"child failed to open pseudo-term slave ",
pts_name, ": ", strerror(errno)};
for (const char* message : messages) {
WriteFdExactly(*error_sfd, message);
}
abort();
}
if (make_pty_raw_) {
termios tattr;
if (tcgetattr(child_fd, &tattr) == -1) {
int saved_errno = errno;
WriteFdExactly(*error_sfd, "tcgetattr failed: ");
WriteFdExactly(*error_sfd, strerror(saved_errno));
abort();
}
cfmakeraw(&tattr);
if (tcsetattr(child_fd, TCSADRAIN, &tattr) == -1) {
int saved_errno = errno;
WriteFdExactly(*error_sfd, "tcsetattr failed: ");
WriteFdExactly(*error_sfd, strerror(saved_errno));
abort();
}
}
return child_fd;
}
void Subprocess::ThreadHandler(void* userdata) {
Subprocess* subprocess = reinterpret_cast<Subprocess*>(userdata);
adb_thread_setname(android::base::StringPrintf(
"shell srvc %d", subprocess->pid()));
D("passing data streams for PID %d", subprocess->pid());
subprocess->PassDataStreams();
D("deleting Subprocess for PID %d", subprocess->pid());
delete subprocess;
}
void Subprocess::PassDataStreams() {
if (protocol_sfd_ == -1) {
return;
}
// Start by trying to read from the protocol FD, stdout, and stderr.
fd_set master_read_set, master_write_set;
FD_ZERO(&master_read_set);
FD_ZERO(&master_write_set);
for (unique_fd* sfd : {&protocol_sfd_, &stdinout_sfd_, &stderr_sfd_}) {
if (*sfd != -1) {
FD_SET(*sfd, &master_read_set);
}
}
// Pass data until the protocol FD or both the subprocess pipes die, at
// which point we can't pass any more data.
while (protocol_sfd_ != -1 && (stdinout_sfd_ != -1 || stderr_sfd_ != -1)) {
unique_fd* dead_sfd = SelectLoop(&master_read_set, &master_write_set);
if (dead_sfd) {
D("closing FD %d", dead_sfd->get());
FD_CLR(*dead_sfd, &master_read_set);
FD_CLR(*dead_sfd, &master_write_set);
if (dead_sfd == &protocol_sfd_) {
// Using SIGHUP is a decent general way to indicate that the
// controlling process is going away. If specific signals are
// needed (e.g. SIGINT), pass those through the shell protocol
// and only fall back on this for unexpected closures.
D("protocol FD died, sending SIGHUP to pid %d", pid_);
kill(pid_, SIGHUP);
// We also need to close the pipes connected to the child process
// so that if it ignores SIGHUP and continues to write data it
// won't fill up the pipe and block.
stdinout_sfd_.reset();
stderr_sfd_.reset();
}
dead_sfd->reset();
}
}
}
namespace {
inline bool ValidAndInSet(const unique_fd& sfd, fd_set* set) {
return sfd != -1 && FD_ISSET(sfd, set);
}
} // namespace
unique_fd* Subprocess::SelectLoop(fd_set* master_read_set_ptr,
fd_set* master_write_set_ptr) {
fd_set read_set, write_set;
int select_n = std::max(std::max(protocol_sfd_, stdinout_sfd_), stderr_sfd_) + 1;
unique_fd* dead_sfd = nullptr;
// Keep calling select() and passing data until an FD closes/errors.
while (!dead_sfd) {
memcpy(&read_set, master_read_set_ptr, sizeof(read_set));
memcpy(&write_set, master_write_set_ptr, sizeof(write_set));
if (select(select_n, &read_set, &write_set, nullptr, nullptr) < 0) {
if (errno == EINTR) {
continue;
} else {
PLOG(ERROR) << "select failed, closing subprocess pipes";
stdinout_sfd_.reset(-1);
stderr_sfd_.reset(-1);
return nullptr;
}
}
// Read stdout, write to protocol FD.
if (ValidAndInSet(stdinout_sfd_, &read_set)) {
dead_sfd = PassOutput(&stdinout_sfd_, ShellProtocol::kIdStdout);
}
// Read stderr, write to protocol FD.
if (!dead_sfd && ValidAndInSet(stderr_sfd_, &read_set)) {
dead_sfd = PassOutput(&stderr_sfd_, ShellProtocol::kIdStderr);
}
// Read protocol FD, write to stdin.
if (!dead_sfd && ValidAndInSet(protocol_sfd_, &read_set)) {
dead_sfd = PassInput();
// If we didn't finish writing, block on stdin write.
if (input_bytes_left_) {
FD_CLR(protocol_sfd_, master_read_set_ptr);
FD_SET(stdinout_sfd_, master_write_set_ptr);
}
}
// Continue writing to stdin; only happens if a previous write blocked.
if (!dead_sfd && ValidAndInSet(stdinout_sfd_, &write_set)) {
dead_sfd = PassInput();
// If we finished writing, go back to blocking on protocol read.
if (!input_bytes_left_) {
FD_SET(protocol_sfd_, master_read_set_ptr);
FD_CLR(stdinout_sfd_, master_write_set_ptr);
}
}
} // while (!dead_sfd)
return dead_sfd;
}
unique_fd* Subprocess::PassInput() {
// Only read a new packet if we've finished writing the last one.
if (!input_bytes_left_) {
if (!input_->Read()) {
// Read() uses ReadFdExactly() which sets errno to 0 on EOF.
if (errno != 0) {
PLOG(ERROR) << "error reading protocol FD " << protocol_sfd_;
}
return &protocol_sfd_;
}
if (stdinout_sfd_ != -1) {
switch (input_->id()) {
case ShellProtocol::kIdWindowSizeChange:
int rows, cols, x_pixels, y_pixels;
if (sscanf(input_->data(), "%dx%d,%dx%d",
&rows, &cols, &x_pixels, &y_pixels) == 4) {
winsize ws;
ws.ws_row = rows;
ws.ws_col = cols;
ws.ws_xpixel = x_pixels;
ws.ws_ypixel = y_pixels;
ioctl(stdinout_sfd_, TIOCSWINSZ, &ws);
}
break;
case ShellProtocol::kIdStdin:
input_bytes_left_ = input_->data_length();
break;
case ShellProtocol::kIdCloseStdin:
if (type_ == SubprocessType::kRaw) {
if (adb_shutdown(stdinout_sfd_, SHUT_WR) == 0) {
return nullptr;
}
PLOG(ERROR) << "failed to shutdown writes to FD "
<< stdinout_sfd_;
return &stdinout_sfd_;
} else {
// PTYs can't close just input, so rather than close the
// FD and risk losing subprocess output, leave it open.
// This only happens if the client starts a PTY shell
// non-interactively which is rare and unsupported.
// If necessary, the client can manually close the shell
// with `exit` or by killing the adb client process.
D("can't close input for PTY FD %d", stdinout_sfd_.get());
}
break;
}
}
}
if (input_bytes_left_ > 0) {
int index = input_->data_length() - input_bytes_left_;
int bytes = adb_write(stdinout_sfd_, input_->data() + index, input_bytes_left_);
if (bytes == 0 || (bytes < 0 && errno != EAGAIN)) {
if (bytes < 0) {
PLOG(ERROR) << "error reading stdin FD " << stdinout_sfd_;
}
// stdin is done, mark this packet as finished and we'll just start
// dumping any further data received from the protocol FD.
input_bytes_left_ = 0;
return &stdinout_sfd_;
} else if (bytes > 0) {
input_bytes_left_ -= bytes;
}
}
return nullptr;
}
unique_fd* Subprocess::PassOutput(unique_fd* sfd, ShellProtocol::Id id) {
int bytes = adb_read(*sfd, output_->data(), output_->data_capacity());
if (bytes == 0 || (bytes < 0 && errno != EAGAIN)) {
// read() returns EIO if a PTY closes; don't report this as an error,
// it just means the subprocess completed.
if (bytes < 0 && !(type_ == SubprocessType::kPty && errno == EIO)) {
PLOG(ERROR) << "error reading output FD " << *sfd;
}
return sfd;
}
if (bytes > 0 && !output_->Write(id, bytes)) {
if (errno != 0) {
PLOG(ERROR) << "error reading protocol FD " << protocol_sfd_;
}
return &protocol_sfd_;
}
return nullptr;
}
void Subprocess::WaitForExit() {
int exit_code = 1;
D("waiting for pid %d", pid_);
while (true) {
int status;
if (pid_ == waitpid(pid_, &status, 0)) {
D("post waitpid (pid=%d) status=%04x", pid_, status);
if (WIFSIGNALED(status)) {
exit_code = 0x80 | WTERMSIG(status);
D("subprocess killed by signal %d", WTERMSIG(status));
break;
} else if (!WIFEXITED(status)) {
D("subprocess didn't exit");
break;
} else if (WEXITSTATUS(status) >= 0) {
exit_code = WEXITSTATUS(status);
D("subprocess exit code = %d", WEXITSTATUS(status));
break;
}
}
}
// If we have an open protocol FD send an exit packet.
if (protocol_sfd_ != -1) {
output_->data()[0] = exit_code;
if (output_->Write(ShellProtocol::kIdExit, 1)) {
D("wrote the exit code packet: %d", exit_code);
} else {
PLOG(ERROR) << "failed to write the exit code packet";
}
protocol_sfd_.reset(-1);
}
// Pass the local socket FD to the shell cleanup fdevent.
if (SHELL_EXIT_NOTIFY_FD >= 0) {
int fd = local_socket_sfd_;
if (WriteFdExactly(SHELL_EXIT_NOTIFY_FD, &fd, sizeof(fd))) {
D("passed fd %d to SHELL_EXIT_NOTIFY_FD (%d) for pid %d",
fd, SHELL_EXIT_NOTIFY_FD, pid_);
// The shell exit fdevent now owns the FD and will close it once
// the last bit of data flushes through.
static_cast<void>(local_socket_sfd_.release());
} else {
PLOG(ERROR) << "failed to write fd " << fd
<< " to SHELL_EXIT_NOTIFY_FD (" << SHELL_EXIT_NOTIFY_FD
<< ") for pid " << pid_;
}
}
}
} // namespace
// Create a pipe containing the error.
static int ReportError(SubprocessProtocol protocol, const std::string& message) {
int pipefd[2];
if (pipe(pipefd) != 0) {
LOG(ERROR) << "failed to create pipe to report error";
return -1;
}
std::string buf = android::base::StringPrintf("error: %s\n", message.c_str());
if (protocol == SubprocessProtocol::kShell) {
ShellProtocol::Id id = ShellProtocol::kIdStderr;
uint32_t length = buf.length();
WriteFdExactly(pipefd[1], &id, sizeof(id));
WriteFdExactly(pipefd[1], &length, sizeof(length));
}
WriteFdExactly(pipefd[1], buf.data(), buf.length());
if (protocol == SubprocessProtocol::kShell) {
ShellProtocol::Id id = ShellProtocol::kIdExit;
uint32_t length = 1;
char exit_code = 126;
WriteFdExactly(pipefd[1], &id, sizeof(id));
WriteFdExactly(pipefd[1], &length, sizeof(length));
WriteFdExactly(pipefd[1], &exit_code, sizeof(exit_code));
}
adb_close(pipefd[1]);
return pipefd[0];
}
int StartSubprocess(const char* name, const char* terminal_type,
SubprocessType type, SubprocessProtocol protocol) {
D("starting %s subprocess (protocol=%s, TERM=%s): '%s'",
type == SubprocessType::kRaw ? "raw" : "PTY",
protocol == SubprocessProtocol::kNone ? "none" : "shell",
terminal_type, name);
auto subprocess = std::make_unique<Subprocess>(name, terminal_type, type, protocol);
if (!subprocess) {
LOG(ERROR) << "failed to allocate new subprocess";
return ReportError(protocol, "failed to allocate new subprocess");
}
std::string error;
if (!subprocess->ForkAndExec(&error)) {
LOG(ERROR) << "failed to start subprocess: " << error;
return ReportError(protocol, error);
}
unique_fd local_socket(subprocess->ReleaseLocalSocket());
D("subprocess creation successful: local_socket_fd=%d, pid=%d", local_socket.get(),
subprocess->pid());
if (!Subprocess::StartThread(std::move(subprocess), &error)) {
LOG(ERROR) << "failed to start subprocess management thread: " << error;
return ReportError(protocol, error);
}
return local_socket.release();
}