blob: 3f32e7d74091f14639e596208b97f3738b935586 [file] [log] [blame]
/*
**
** Copyright 2010, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
#define PROGNAME "run-as"
#define LOG_TAG PROGNAME
#include <dirent.h>
#include <errno.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/capability.h>
#include <sys/cdefs.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <time.h>
#include <unistd.h>
#include <private/android_filesystem_config.h>
#include <selinux/android.h>
#include "package.h"
/*
* WARNING WARNING WARNING WARNING
*
* This program runs with CAP_SETUID and CAP_SETGID capabilities on Android
* production devices. Be very conservative when modifying it to avoid any
* serious security issue. Keep in mind the following:
*
* - This program should only run for the 'root' or 'shell' users
*
* - Avoid anything that is more complex than simple system calls
* until the uid/gid has been dropped to that of a normal user
* or you are sure to exit.
*
* This avoids depending on environment variables, system properties
* and other external factors that may affect the C library in
* unpredictable ways.
*
* - Do not trust user input and/or the filesystem whenever possible.
*
* Read README.TXT for more details.
*
*
*
* The purpose of this program is to run a command as a specific
* application user-id. Typical usage is:
*
* run-as <package-name> <command> <args>
*
* The 'run-as' binary is installed with CAP_SETUID and CAP_SETGID file
* capabilities, but will check the following:
*
* - that it is invoked from the 'shell' or 'root' user (abort otherwise)
* - that '<package-name>' is the name of an installed and debuggable package
* - that the package's data directory is well-formed (see package.c)
*
* If so, it will drop to the application's user id / group id, cd to the
* package's data directory, then run the command there.
*
* NOTE: In the future it might not be possible to cd to the package's data
* directory under that package's user id / group id, in which case this
* utility will need to be changed accordingly.
*
* This can be useful for a number of different things on production devices:
*
* - Allow application developers to look at their own applicative data
* during development.
*
* - Run the 'gdbserver' binary executable to allow native debugging
*/
__noreturn static void
panic(const char* format, ...)
{
va_list args;
int e = errno;
fprintf(stderr, "%s: ", PROGNAME);
va_start(args, format);
vfprintf(stderr, format, args);
va_end(args);
exit(e ? -e : 1);
}
static void
usage(void)
{
panic("Usage:\n " PROGNAME " <package-name> [--user <uid>] <command> [<args>]\n");
}
int main(int argc, char **argv)
{
const char* pkgname;
uid_t myuid, uid, gid, userAppId = 0;
int commandArgvOfs = 2, userId = 0;
PackageInfo info;
struct __user_cap_header_struct capheader;
struct __user_cap_data_struct capdata[2];
/* check arguments */
if (argc < 2) {
usage();
}
/* check userid of caller - must be 'shell' or 'root' */
myuid = getuid();
if (myuid != AID_SHELL && myuid != AID_ROOT) {
panic("only 'shell' or 'root' users can run this program\n");
}
memset(&capheader, 0, sizeof(capheader));
memset(&capdata, 0, sizeof(capdata));
capheader.version = _LINUX_CAPABILITY_VERSION_3;
capdata[CAP_TO_INDEX(CAP_SETUID)].effective |= CAP_TO_MASK(CAP_SETUID);
capdata[CAP_TO_INDEX(CAP_SETGID)].effective |= CAP_TO_MASK(CAP_SETGID);
capdata[CAP_TO_INDEX(CAP_SETUID)].permitted |= CAP_TO_MASK(CAP_SETUID);
capdata[CAP_TO_INDEX(CAP_SETGID)].permitted |= CAP_TO_MASK(CAP_SETGID);
if (capset(&capheader, &capdata[0]) < 0) {
panic("Could not set capabilities: %s\n", strerror(errno));
}
pkgname = argv[1];
/* get user_id from command line if provided */
if ((argc >= 4) && !strcmp(argv[2], "--user")) {
userId = atoi(argv[3]);
if (userId < 0)
panic("Negative user id %d is provided\n", userId);
commandArgvOfs += 2;
}
/* retrieve package information from system (does setegid) */
if (get_package_info(pkgname, userId, &info) < 0) {
panic("Package '%s' is unknown\n", pkgname);
}
/* verify that user id is not too big. */
if ((UID_MAX - info.uid) / AID_USER < (uid_t)userId) {
panic("User id %d is too big\n", userId);
}
/* calculate user app ID. */
userAppId = (AID_USER * userId) + info.uid;
/* reject system packages */
if (userAppId < AID_APP) {
panic("Package '%s' is not an application\n", pkgname);
}
/* reject any non-debuggable package */
if (!info.isDebuggable) {
panic("Package '%s' is not debuggable\n", pkgname);
}
/* check that the data directory path is valid */
if (check_data_path(info.dataDir, userAppId) < 0) {
panic("Package '%s' has corrupt installation\n", pkgname);
}
/* Ensure that we change all real/effective/saved IDs at the
* same time to avoid nasty surprises.
*/
uid = gid = userAppId;
if(setresgid(gid,gid,gid) || setresuid(uid,uid,uid)) {
panic("Permission denied\n");
}
/* Required if caller has uid and gid all non-zero */
memset(&capdata, 0, sizeof(capdata));
if (capset(&capheader, &capdata[0]) < 0) {
panic("Could not clear all capabilities: %s\n", strerror(errno));
}
if (selinux_android_setcontext(uid, 0, info.seinfo, pkgname) < 0) {
panic("Could not set SELinux security context: %s\n", strerror(errno));
}
/* cd into the data directory */
if (TEMP_FAILURE_RETRY(chdir(info.dataDir)) < 0) {
panic("Could not cd to package's data directory: %s\n", strerror(errno));
}
/* User specified command for exec. */
if ((argc >= commandArgvOfs + 1) &&
(execvp(argv[commandArgvOfs], argv+commandArgvOfs) < 0)) {
panic("exec failed for %s: %s\n", argv[commandArgvOfs], strerror(errno));
}
/* Default exec shell. */
execlp("/system/bin/sh", "sh", NULL);
panic("exec failed: %s\n", strerror(errno));
}