| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_GUI_IGRAPHICBUFFERPRODUCER_H |
| #define ANDROID_GUI_IGRAPHICBUFFERPRODUCER_H |
| |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #include <utils/Errors.h> |
| #include <utils/RefBase.h> |
| |
| #include <binder/IInterface.h> |
| |
| #include <ui/Fence.h> |
| #include <ui/GraphicBuffer.h> |
| #include <ui/Rect.h> |
| |
| namespace android { |
| // ---------------------------------------------------------------------------- |
| |
| class IProducerListener; |
| class NativeHandle; |
| class Surface; |
| |
| /* |
| * This class defines the Binder IPC interface for the producer side of |
| * a queue of graphics buffers. It's used to send graphics data from one |
| * component to another. For example, a class that decodes video for |
| * playback might use this to provide frames. This is typically done |
| * indirectly, through Surface. |
| * |
| * The underlying mechanism is a BufferQueue, which implements |
| * BnGraphicBufferProducer. In normal operation, the producer calls |
| * dequeueBuffer() to get an empty buffer, fills it with data, then |
| * calls queueBuffer() to make it available to the consumer. |
| * |
| * This class was previously called ISurfaceTexture. |
| */ |
| class IGraphicBufferProducer : public IInterface |
| { |
| public: |
| DECLARE_META_INTERFACE(GraphicBufferProducer); |
| |
| enum { |
| // A flag returned by dequeueBuffer when the client needs to call |
| // requestBuffer immediately thereafter. |
| BUFFER_NEEDS_REALLOCATION = 0x1, |
| // A flag returned by dequeueBuffer when all mirrored slots should be |
| // released by the client. This flag should always be processed first. |
| RELEASE_ALL_BUFFERS = 0x2, |
| }; |
| |
| // requestBuffer requests a new buffer for the given index. The server (i.e. |
| // the IGraphicBufferProducer implementation) assigns the newly created |
| // buffer to the given slot index, and the client is expected to mirror the |
| // slot->buffer mapping so that it's not necessary to transfer a |
| // GraphicBuffer for every dequeue operation. |
| // |
| // The slot must be in the range of [0, NUM_BUFFER_SLOTS). |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - one of the two conditions occurred: |
| // * slot was out of range (see above) |
| // * buffer specified by the slot is not dequeued |
| virtual status_t requestBuffer(int slot, sp<GraphicBuffer>* buf) = 0; |
| |
| // setBufferCount sets the number of buffer slots available. Calling this |
| // will also cause all buffer slots to be emptied. The caller should empty |
| // its mirrored copy of the buffer slots when calling this method. |
| // |
| // This function should not be called when there are any dequeued buffer |
| // slots, doing so will result in a BAD_VALUE error returned. |
| // |
| // The buffer count should be at most NUM_BUFFER_SLOTS (inclusive), but at least |
| // the minimum undequeued buffer count (exclusive). The minimum value |
| // can be obtained by calling query(NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS). |
| // In particular the range is (minUndequeudBuffers, NUM_BUFFER_SLOTS]. |
| // |
| // The buffer count may also be set to 0 (the default), to indicate that |
| // the producer does not wish to set a value. |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - one of the below conditions occurred: |
| // * bufferCount was out of range (see above) |
| // * client has one or more buffers dequeued |
| virtual status_t setBufferCount(int bufferCount) = 0; |
| |
| // dequeueBuffer requests a new buffer slot for the client to use. Ownership |
| // of the slot is transfered to the client, meaning that the server will not |
| // use the contents of the buffer associated with that slot. |
| // |
| // The slot index returned may or may not contain a buffer (client-side). |
| // If the slot is empty the client should call requestBuffer to assign a new |
| // buffer to that slot. |
| // |
| // Once the client is done filling this buffer, it is expected to transfer |
| // buffer ownership back to the server with either cancelBuffer on |
| // the dequeued slot or to fill in the contents of its associated buffer |
| // contents and call queueBuffer. |
| // |
| // If dequeueBuffer returns the BUFFER_NEEDS_REALLOCATION flag, the client is |
| // expected to call requestBuffer immediately. |
| // |
| // If dequeueBuffer returns the RELEASE_ALL_BUFFERS flag, the client is |
| // expected to release all of the mirrored slot->buffer mappings. |
| // |
| // The fence parameter will be updated to hold the fence associated with |
| // the buffer. The contents of the buffer must not be overwritten until the |
| // fence signals. If the fence is Fence::NO_FENCE, the buffer may be written |
| // immediately. |
| // |
| // The async parameter sets whether we're in asynchronous mode for this |
| // dequeueBuffer() call. |
| // |
| // The width and height parameters must be no greater than the minimum of |
| // GL_MAX_VIEWPORT_DIMS and GL_MAX_TEXTURE_SIZE (see: glGetIntegerv). |
| // An error due to invalid dimensions might not be reported until |
| // updateTexImage() is called. If width and height are both zero, the |
| // default values specified by setDefaultBufferSize() are used instead. |
| // |
| // The pixel formats are enumerated in <graphics.h>, e.g. |
| // HAL_PIXEL_FORMAT_RGBA_8888. If the format is 0, the default format |
| // will be used. |
| // |
| // The usage argument specifies gralloc buffer usage flags. The values |
| // are enumerated in <gralloc.h>, e.g. GRALLOC_USAGE_HW_RENDER. These |
| // will be merged with the usage flags specified by |
| // IGraphicBufferConsumer::setConsumerUsageBits. |
| // |
| // This call will block until a buffer is available to be dequeued. If |
| // both the producer and consumer are controlled by the app, then this call |
| // can never block and will return WOULD_BLOCK if no buffer is available. |
| // |
| // A non-negative value with flags set (see above) will be returned upon |
| // success. |
| // |
| // Return of a negative means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - both in async mode and buffer count was less than the |
| // max numbers of buffers that can be allocated at once. |
| // * INVALID_OPERATION - cannot attach the buffer because it would cause |
| // too many buffers to be dequeued, either because |
| // the producer already has a single buffer dequeued |
| // and did not set a buffer count, or because a |
| // buffer count was set and this call would cause |
| // it to be exceeded. |
| // * WOULD_BLOCK - no buffer is currently available, and blocking is disabled |
| // since both the producer/consumer are controlled by app |
| // * NO_MEMORY - out of memory, cannot allocate the graphics buffer. |
| // |
| // All other negative values are an unknown error returned downstream |
| // from the graphics allocator (typically errno). |
| virtual status_t dequeueBuffer(int* slot, sp<Fence>* fence, bool async, |
| uint32_t w, uint32_t h, uint32_t format, uint32_t usage) = 0; |
| |
| // detachBuffer attempts to remove all ownership of the buffer in the given |
| // slot from the buffer queue. If this call succeeds, the slot will be |
| // freed, and there will be no way to obtain the buffer from this interface. |
| // The freed slot will remain unallocated until either it is selected to |
| // hold a freshly allocated buffer in dequeueBuffer or a buffer is attached |
| // to the slot. The buffer must have already been dequeued, and the caller |
| // must already possesses the sp<GraphicBuffer> (i.e., must have called |
| // requestBuffer). |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - the given slot number is invalid, either because it is |
| // out of the range [0, NUM_BUFFER_SLOTS), or because the slot |
| // it refers to is not currently dequeued and requested. |
| virtual status_t detachBuffer(int slot) = 0; |
| |
| // detachNextBuffer is equivalent to calling dequeueBuffer, requestBuffer, |
| // and detachBuffer in sequence, except for two things: |
| // |
| // 1) It is unnecessary to know the dimensions, format, or usage of the |
| // next buffer. |
| // 2) It will not block, since if it cannot find an appropriate buffer to |
| // return, it will return an error instead. |
| // |
| // Only slots that are free but still contain a GraphicBuffer will be |
| // considered, and the oldest of those will be returned. outBuffer is |
| // equivalent to outBuffer from the requestBuffer call, and outFence is |
| // equivalent to fence from the dequeueBuffer call. |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - either outBuffer or outFence were NULL. |
| // * NO_MEMORY - no slots were found that were both free and contained a |
| // GraphicBuffer. |
| virtual status_t detachNextBuffer(sp<GraphicBuffer>* outBuffer, |
| sp<Fence>* outFence) = 0; |
| |
| // attachBuffer attempts to transfer ownership of a buffer to the buffer |
| // queue. If this call succeeds, it will be as if this buffer was dequeued |
| // from the returned slot number. As such, this call will fail if attaching |
| // this buffer would cause too many buffers to be simultaneously dequeued. |
| // |
| // If attachBuffer returns the RELEASE_ALL_BUFFERS flag, the caller is |
| // expected to release all of the mirrored slot->buffer mappings. |
| // |
| // A non-negative value with flags set (see above) will be returned upon |
| // success. |
| // |
| // Return of a negative value means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - outSlot or buffer were NULL or invalid combination of |
| // async mode and buffer count override. |
| // * INVALID_OPERATION - cannot attach the buffer because it would cause |
| // too many buffers to be dequeued, either because |
| // the producer already has a single buffer dequeued |
| // and did not set a buffer count, or because a |
| // buffer count was set and this call would cause |
| // it to be exceeded. |
| // * WOULD_BLOCK - no buffer slot is currently available, and blocking is |
| // disabled since both the producer/consumer are |
| // controlled by the app. |
| virtual status_t attachBuffer(int* outSlot, |
| const sp<GraphicBuffer>& buffer) = 0; |
| |
| // queueBuffer indicates that the client has finished filling in the |
| // contents of the buffer associated with slot and transfers ownership of |
| // that slot back to the server. |
| // |
| // It is not valid to call queueBuffer on a slot that is not owned |
| // by the client or one for which a buffer associated via requestBuffer |
| // (an attempt to do so will fail with a return value of BAD_VALUE). |
| // |
| // In addition, the input must be described by the client (as documented |
| // below). Any other properties (zero point, etc) |
| // are client-dependent, and should be documented by the client. |
| // |
| // The slot must be in the range of [0, NUM_BUFFER_SLOTS). |
| // |
| // Upon success, the output will be filled with meaningful values |
| // (refer to the documentation below). |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - one of the below conditions occurred: |
| // * fence was NULL |
| // * scaling mode was unknown |
| // * both in async mode and buffer count was less than the |
| // max numbers of buffers that can be allocated at once |
| // * slot index was out of range (see above). |
| // * the slot was not in the dequeued state |
| // * the slot was enqueued without requesting a buffer |
| // * crop rect is out of bounds of the buffer dimensions |
| |
| struct QueueBufferInput : public Flattenable<QueueBufferInput> { |
| friend class Flattenable<QueueBufferInput>; |
| inline QueueBufferInput(const Parcel& parcel); |
| // timestamp - a monotonically increasing value in nanoseconds |
| // isAutoTimestamp - if the timestamp was synthesized at queue time |
| // crop - a crop rectangle that's used as a hint to the consumer |
| // scalingMode - a set of flags from NATIVE_WINDOW_SCALING_* in <window.h> |
| // transform - a set of flags from NATIVE_WINDOW_TRANSFORM_* in <window.h> |
| // async - if the buffer is queued in asynchronous mode |
| // fence - a fence that the consumer must wait on before reading the buffer, |
| // set this to Fence::NO_FENCE if the buffer is ready immediately |
| // sticky - the sticky transform set in Surface (only used by the LEGACY |
| // camera mode). |
| inline QueueBufferInput(int64_t timestamp, bool isAutoTimestamp, |
| const Rect& crop, int scalingMode, uint32_t transform, bool async, |
| const sp<Fence>& fence, uint32_t sticky = 0) |
| : timestamp(timestamp), isAutoTimestamp(isAutoTimestamp), crop(crop), |
| scalingMode(scalingMode), transform(transform), stickyTransform(sticky), |
| async(async), fence(fence) { } |
| inline void deflate(int64_t* outTimestamp, bool* outIsAutoTimestamp, |
| Rect* outCrop, int* outScalingMode, uint32_t* outTransform, |
| bool* outAsync, sp<Fence>* outFence, |
| uint32_t* outStickyTransform = NULL) const { |
| *outTimestamp = timestamp; |
| *outIsAutoTimestamp = bool(isAutoTimestamp); |
| *outCrop = crop; |
| *outScalingMode = scalingMode; |
| *outTransform = transform; |
| *outAsync = bool(async); |
| *outFence = fence; |
| if (outStickyTransform != NULL) { |
| *outStickyTransform = stickyTransform; |
| } |
| } |
| |
| // Flattenable protocol |
| size_t getFlattenedSize() const; |
| size_t getFdCount() const; |
| status_t flatten(void*& buffer, size_t& size, int*& fds, size_t& count) const; |
| status_t unflatten(void const*& buffer, size_t& size, int const*& fds, size_t& count); |
| |
| private: |
| int64_t timestamp; |
| int isAutoTimestamp; |
| Rect crop; |
| int scalingMode; |
| uint32_t transform; |
| uint32_t stickyTransform; |
| int async; |
| sp<Fence> fence; |
| }; |
| |
| // QueueBufferOutput must be a POD structure |
| struct __attribute__ ((__packed__)) QueueBufferOutput { |
| inline QueueBufferOutput() { } |
| // outWidth - filled with default width applied to the buffer |
| // outHeight - filled with default height applied to the buffer |
| // outTransformHint - filled with default transform applied to the buffer |
| // outNumPendingBuffers - num buffers queued that haven't yet been acquired |
| // (counting the currently queued buffer) |
| inline void deflate(uint32_t* outWidth, |
| uint32_t* outHeight, |
| uint32_t* outTransformHint, |
| uint32_t* outNumPendingBuffers) const { |
| *outWidth = width; |
| *outHeight = height; |
| *outTransformHint = transformHint; |
| *outNumPendingBuffers = numPendingBuffers; |
| } |
| inline void inflate(uint32_t inWidth, uint32_t inHeight, |
| uint32_t inTransformHint, uint32_t inNumPendingBuffers) { |
| width = inWidth; |
| height = inHeight; |
| transformHint = inTransformHint; |
| numPendingBuffers = inNumPendingBuffers; |
| } |
| private: |
| uint32_t width; |
| uint32_t height; |
| uint32_t transformHint; |
| uint32_t numPendingBuffers; |
| }; |
| |
| virtual status_t queueBuffer(int slot, |
| const QueueBufferInput& input, QueueBufferOutput* output) = 0; |
| |
| // cancelBuffer indicates that the client does not wish to fill in the |
| // buffer associated with slot and transfers ownership of the slot back to |
| // the server. |
| // |
| // The buffer is not queued for use by the consumer. |
| // |
| // The buffer will not be overwritten until the fence signals. The fence |
| // will usually be the one obtained from dequeueBuffer. |
| virtual void cancelBuffer(int slot, const sp<Fence>& fence) = 0; |
| |
| // query retrieves some information for this surface |
| // 'what' tokens allowed are that of NATIVE_WINDOW_* in <window.h> |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - the buffer queue has been abandoned. |
| // * BAD_VALUE - what was out of range |
| virtual int query(int what, int* value) = 0; |
| |
| // connect attempts to connect a client API to the IGraphicBufferProducer. |
| // This must be called before any other IGraphicBufferProducer methods are |
| // called except for getAllocator. A consumer must be already connected. |
| // |
| // This method will fail if the connect was previously called on the |
| // IGraphicBufferProducer and no corresponding disconnect call was made. |
| // |
| // The listener is an optional binder callback object that can be used if |
| // the producer wants to be notified when the consumer releases a buffer |
| // back to the BufferQueue. It is also used to detect the death of the |
| // producer. If only the latter functionality is desired, there is a |
| // DummyProducerListener class in IProducerListener.h that can be used. |
| // |
| // The api should be one of the NATIVE_WINDOW_API_* values in <window.h> |
| // |
| // The producerControlledByApp should be set to true if the producer is hosted |
| // by an untrusted process (typically app_process-forked processes). If both |
| // the producer and the consumer are app-controlled then all buffer queues |
| // will operate in async mode regardless of the async flag. |
| // |
| // Upon success, the output will be filled with meaningful data |
| // (refer to QueueBufferOutput documentation above). |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * NO_INIT - one of the following occurred: |
| // * the buffer queue was abandoned |
| // * no consumer has yet connected |
| // * BAD_VALUE - one of the following has occurred: |
| // * the producer is already connected |
| // * api was out of range (see above). |
| // * output was NULL. |
| // * DEAD_OBJECT - the token is hosted by an already-dead process |
| // |
| // Additional negative errors may be returned by the internals, they |
| // should be treated as opaque fatal unrecoverable errors. |
| virtual status_t connect(const sp<IProducerListener>& listener, |
| int api, bool producerControlledByApp, QueueBufferOutput* output) = 0; |
| |
| // disconnect attempts to disconnect a client API from the |
| // IGraphicBufferProducer. Calling this method will cause any subsequent |
| // calls to other IGraphicBufferProducer methods to fail except for |
| // getAllocator and connect. Successfully calling connect after this will |
| // allow the other methods to succeed again. |
| // |
| // This method will fail if the the IGraphicBufferProducer is not currently |
| // connected to the specified client API. |
| // |
| // The api should be one of the NATIVE_WINDOW_API_* values in <window.h> |
| // |
| // Disconnecting from an abandoned IGraphicBufferProducer is legal and |
| // is considered a no-op. |
| // |
| // Return of a value other than NO_ERROR means an error has occurred: |
| // * BAD_VALUE - one of the following has occurred: |
| // * the api specified does not match the one that was connected |
| // * api was out of range (see above). |
| // * DEAD_OBJECT - the token is hosted by an already-dead process |
| virtual status_t disconnect(int api) = 0; |
| |
| // Attaches a sideband buffer stream to the IGraphicBufferProducer. |
| // |
| // A sideband stream is a device-specific mechanism for passing buffers |
| // from the producer to the consumer without using dequeueBuffer/ |
| // queueBuffer. If a sideband stream is present, the consumer can choose |
| // whether to acquire buffers from the sideband stream or from the queued |
| // buffers. |
| // |
| // Passing NULL or a different stream handle will detach the previous |
| // handle if any. |
| virtual status_t setSidebandStream(const sp<NativeHandle>& stream) = 0; |
| |
| // Allocates buffers based on the given dimensions/format. |
| // |
| // This function will allocate up to the maximum number of buffers |
| // permitted by the current BufferQueue configuration. It will use the |
| // given format, dimensions, and usage bits, which are interpreted in the |
| // same way as for dequeueBuffer, and the async flag must be set the same |
| // way as for dequeueBuffer to ensure that the correct number of buffers are |
| // allocated. This is most useful to avoid an allocation delay during |
| // dequeueBuffer. If there are already the maximum number of buffers |
| // allocated, this function has no effect. |
| virtual void allocateBuffers(bool async, uint32_t width, uint32_t height, |
| uint32_t format, uint32_t usage) = 0; |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| class BnGraphicBufferProducer : public BnInterface<IGraphicBufferProducer> |
| { |
| public: |
| virtual status_t onTransact( uint32_t code, |
| const Parcel& data, |
| Parcel* reply, |
| uint32_t flags = 0); |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| }; // namespace android |
| |
| #endif // ANDROID_GUI_IGRAPHICBUFFERPRODUCER_H |
