blob: f71723d8c9763da997d82626330cc8c3d382a5d1 [file] [log] [blame]
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_SENSOR_SERVICE_H
#define ANDROID_SENSOR_SERVICE_H
#include "SensorList.h"
#include "RecentEventLogger.h"
#include <binder/BinderService.h>
#include <binder/IUidObserver.h>
#include <cutils/compiler.h>
#include <sensor/ISensorServer.h>
#include <sensor/ISensorEventConnection.h>
#include <sensor/Sensor.h>
#include <utils/AndroidThreads.h>
#include <utils/KeyedVector.h>
#include <utils/Looper.h>
#include <utils/SortedVector.h>
#include <utils/String8.h>
#include <utils/Vector.h>
#include <utils/threads.h>
#include <stdint.h>
#include <sys/types.h>
#include <unordered_map>
#include <unordered_set>
#if __clang__
// Clang warns about SensorEventConnection::dump hiding BBinder::dump. The cause isn't fixable
// without changing the API, so let's tell clang this is indeed intentional.
#pragma clang diagnostic ignored "-Woverloaded-virtual"
#endif
// ---------------------------------------------------------------------------
#define IGNORE_HARDWARE_FUSION false
#define DEBUG_CONNECTIONS false
// Max size is 100 KB which is enough to accept a batch of about 1000 events.
#define MAX_SOCKET_BUFFER_SIZE_BATCHED (100 * 1024)
// For older HALs which don't support batching, use a smaller socket buffer size.
#define SOCKET_BUFFER_SIZE_NON_BATCHED (4 * 1024)
#define SENSOR_REGISTRATIONS_BUF_SIZE 200
namespace android {
// ---------------------------------------------------------------------------
class SensorInterface;
using namespace SensorServiceUtil;
class SensorService :
public BinderService<SensorService>,
public BnSensorServer,
protected Thread
{
// nested class/struct for internal use
class SensorEventConnection;
class SensorDirectConnection;
public:
void cleanupConnection(SensorEventConnection* connection);
void cleanupConnection(SensorDirectConnection* c);
status_t enable(const sp<SensorEventConnection>& connection, int handle,
nsecs_t samplingPeriodNs, nsecs_t maxBatchReportLatencyNs, int reservedFlags,
const String16& opPackageName);
status_t disable(const sp<SensorEventConnection>& connection, int handle);
status_t setEventRate(const sp<SensorEventConnection>& connection, int handle, nsecs_t ns,
const String16& opPackageName);
status_t flushSensor(const sp<SensorEventConnection>& connection,
const String16& opPackageName);
virtual status_t shellCommand(int in, int out, int err, Vector<String16>& args);
private:
friend class BinderService<SensorService>;
// nested class/struct for internal use
class SensorRecord;
class SensorEventAckReceiver;
class SensorRegistrationInfo;
// If accessing a sensor we need to make sure the UID has access to it. If
// the app UID is idle then it cannot access sensors and gets no trigger
// events, no on-change events, flush event behavior does not change, and
// recurring events are the same as the first one delivered in idle state
// emulating no sensor change. As soon as the app UID transitions to an
// active state we will start reporting events as usual and vise versa. This
// approach transparently handles observing sensors while the app UID transitions
// between idle/active state avoiding to get stuck in a state receiving sensor
// data while idle or not receiving sensor data while active.
class UidPolicy : public BnUidObserver {
public:
explicit UidPolicy(wp<SensorService> service)
: mService(service) {}
void registerSelf();
void unregisterSelf();
bool isUidActive(uid_t uid);
void onUidGone(uid_t uid, bool disabled);
void onUidActive(uid_t uid);
void onUidIdle(uid_t uid, bool disabled);
void addOverrideUid(uid_t uid, bool active);
void removeOverrideUid(uid_t uid);
private:
bool isUidActiveLocked(uid_t uid);
void updateOverrideUid(uid_t uid, bool active, bool insert);
Mutex mUidLock;
wp<SensorService> mService;
std::unordered_set<uid_t> mActiveUids;
std::unordered_map<uid_t, bool> mOverrideUids;
};
enum Mode {
// The regular operating mode where any application can register/unregister/call flush on
// sensors.
NORMAL = 0,
// This mode is only used for testing purposes. Not all HALs support this mode. In this mode,
// the HAL ignores the sensor data provided by physical sensors and accepts the data that is
// injected from the SensorService as if it were the real sensor data. This mode is primarily
// used for testing various algorithms like vendor provided SensorFusion, Step Counter and
// Step Detector etc. Typically in this mode, there will be a client (a
// SensorEventConnection) which will be injecting sensor data into the HAL. Normal apps can
// unregister and register for any sensor that supports injection. Registering to sensors
// that do not support injection will give an error. TODO(aakella) : Allow exactly one
// client to inject sensor data at a time.
DATA_INJECTION = 1,
// This mode is used only for testing sensors. Each sensor can be tested in isolation with
// the required sampling_rate and maxReportLatency parameters without having to think about
// the data rates requested by other applications. End user devices are always expected to be
// in NORMAL mode. When this mode is first activated, all active sensors from all connections
// are disabled. Calling flush() will return an error. In this mode, only the requests from
// selected apps whose package names are whitelisted are allowed (typically CTS apps). Only
// these apps can register/unregister/call flush() on sensors. If SensorService switches to
// NORMAL mode again, all sensors that were previously registered to are activated with the
// corresponding paramaters if the application hasn't unregistered for sensors in the mean
// time. NOTE: Non whitelisted app whose sensors were previously deactivated may still
// receive events if a whitelisted app requests data from the same sensor.
RESTRICTED = 2
// State Transitions supported.
// RESTRICTED <--- NORMAL ---> DATA_INJECTION
// ---> <---
// Shell commands to switch modes in SensorService.
// 1) Put SensorService in RESTRICTED mode with packageName .cts. If it is already in
// restricted mode it is treated as a NO_OP (and packageName is NOT changed).
//
// $ adb shell dumpsys sensorservice restrict .cts.
//
// 2) Put SensorService in DATA_INJECTION mode with packageName .xts. If it is already in
// data_injection mode it is treated as a NO_OP (and packageName is NOT changed).
//
// $ adb shell dumpsys sensorservice data_injection .xts.
//
// 3) Reset sensorservice back to NORMAL mode.
// $ adb shell dumpsys sensorservice enable
};
static const char* WAKE_LOCK_NAME;
static char const* getServiceName() ANDROID_API { return "sensorservice"; }
SensorService() ANDROID_API;
virtual ~SensorService();
virtual void onFirstRef();
// Thread interface
virtual bool threadLoop();
// ISensorServer interface
virtual Vector<Sensor> getSensorList(const String16& opPackageName);
virtual Vector<Sensor> getDynamicSensorList(const String16& opPackageName);
virtual sp<ISensorEventConnection> createSensorEventConnection(
const String8& packageName,
int requestedMode, const String16& opPackageName);
virtual int isDataInjectionEnabled();
virtual sp<ISensorEventConnection> createSensorDirectConnection(const String16& opPackageName,
uint32_t size, int32_t type, int32_t format, const native_handle *resource);
virtual int setOperationParameter(
int32_t handle, int32_t type, const Vector<float> &floats, const Vector<int32_t> &ints);
virtual status_t dump(int fd, const Vector<String16>& args);
String8 getSensorName(int handle) const;
bool isVirtualSensor(int handle) const;
sp<SensorInterface> getSensorInterfaceFromHandle(int handle) const;
bool isWakeUpSensor(int type) const;
void recordLastValueLocked(sensors_event_t const* buffer, size_t count);
static void sortEventBuffer(sensors_event_t* buffer, size_t count);
const Sensor& registerSensor(SensorInterface* sensor,
bool isDebug = false, bool isVirtual = false);
const Sensor& registerVirtualSensor(SensorInterface* sensor, bool isDebug = false);
const Sensor& registerDynamicSensorLocked(SensorInterface* sensor, bool isDebug = false);
bool unregisterDynamicSensorLocked(int handle);
status_t cleanupWithoutDisable(const sp<SensorEventConnection>& connection, int handle);
status_t cleanupWithoutDisableLocked(const sp<SensorEventConnection>& connection, int handle);
void cleanupAutoDisabledSensorLocked(const sp<SensorEventConnection>& connection,
sensors_event_t const* buffer, const int count);
static bool canAccessSensor(const Sensor& sensor, const char* operation,
const String16& opPackageName);
// SensorService acquires a partial wakelock for delivering events from wake up sensors. This
// method checks whether all the events from these wake up sensors have been delivered to the
// corresponding applications, if yes the wakelock is released.
void checkWakeLockState();
void checkWakeLockStateLocked();
bool isWakeLockAcquired();
bool isWakeUpSensorEvent(const sensors_event_t& event) const;
sp<Looper> getLooper() const;
// Reset mWakeLockRefCounts for all SensorEventConnections to zero. This may happen if
// SensorService did not receive any acknowledgements from apps which have registered for
// wake_up sensors.
void resetAllWakeLockRefCounts();
// Acquire or release wake_lock. If wake_lock is acquired, set the timeout in the looper to 5
// seconds and wake the looper.
void setWakeLockAcquiredLocked(bool acquire);
// Send events from the event cache for this particular connection.
void sendEventsFromCache(const sp<SensorEventConnection>& connection);
// Promote all weak referecences in mActiveConnections vector to strong references and add them
// to the output vector.
void populateActiveConnections( SortedVector< sp<SensorEventConnection> >* activeConnections);
// If SensorService is operating in RESTRICTED mode, only select whitelisted packages are
// allowed to register for or call flush on sensors. Typically only cts test packages are
// allowed.
bool isWhiteListedPackage(const String8& packageName);
bool isOperationRestricted(const String16& opPackageName);
// Reset the state of SensorService to NORMAL mode.
status_t resetToNormalMode();
status_t resetToNormalModeLocked();
// Transforms the UUIDs for all the sensors into proper IDs.
void makeUuidsIntoIdsForSensorList(Vector<Sensor> &sensorList) const;
// Gets the appropriate ID from the given UUID.
int32_t getIdFromUuid(const Sensor::uuid_t &uuid) const;
// Either read from storage or create a new one.
static bool initializeHmacKey();
// Enable SCHED_FIFO priority for thread
void enableSchedFifoMode();
// Sets whether the given UID can get sensor data
void setSensorAccess(uid_t uid, bool hasAccess);
// Overrides the UID state as if it is idle
status_t handleSetUidState(Vector<String16>& args, int err);
// Clears the override for the UID state
status_t handleResetUidState(Vector<String16>& args, int err);
// Gets the UID state
status_t handleGetUidState(Vector<String16>& args, int out, int err);
// Prints the shell command help
status_t printHelp(int out);
static uint8_t sHmacGlobalKey[128];
static bool sHmacGlobalKeyIsValid;
SensorList mSensors;
status_t mInitCheck;
// Socket buffersize used to initialize BitTube. This size depends on whether batching is
// supported or not.
uint32_t mSocketBufferSize;
sp<Looper> mLooper;
sp<SensorEventAckReceiver> mAckReceiver;
// protected by mLock
mutable Mutex mLock;
DefaultKeyedVector<int, SensorRecord*> mActiveSensors;
std::unordered_set<int> mActiveVirtualSensors;
SortedVector< wp<SensorEventConnection> > mActiveConnections;
bool mWakeLockAcquired;
sensors_event_t *mSensorEventBuffer, *mSensorEventScratch;
wp<const SensorEventConnection> * mMapFlushEventsToConnections;
std::unordered_map<int, RecentEventLogger*> mRecentEvent;
SortedVector< wp<SensorDirectConnection> > mDirectConnections;
Mode mCurrentOperatingMode;
// This packagaName is set when SensorService is in RESTRICTED or DATA_INJECTION mode. Only
// applications with this packageName are allowed to activate/deactivate or call flush on
// sensors. To run CTS this is can be set to ".cts." and only CTS tests will get access to
// sensors.
String8 mWhiteListedPackage;
int mNextSensorRegIndex;
Vector<SensorRegistrationInfo> mLastNSensorRegistrations;
sp<UidPolicy> mUidPolicy;
};
} // namespace android
#endif // ANDROID_SENSOR_SERVICE_H