blob: 19df760ab31c8261d8746f1f61f60600501dea6d [file] [log] [blame]
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @addtogroup Media
* @{
*/
/**
* @file NdkImage.h
*/
/*
* This file defines an NDK API.
* Do not remove methods.
* Do not change method signatures.
* Do not change the value of constants.
* Do not change the size of any of the classes defined in here.
* Do not reference types that are not part of the NDK.
* Do not #include files that aren't part of the NDK.
*/
#ifndef _NDK_IMAGE_H
#define _NDK_IMAGE_H
#include <sys/cdefs.h>
#include "NdkMediaError.h"
#if __ANDROID_API__ >= 26
#include <android/hardware_buffer.h>
#endif /* __ANDROID_API__ >= 26 */
__BEGIN_DECLS
/**
* AImage is an opaque type that provides access to image generated by {@link AImageReader}.
*/
typedef struct AImage AImage;
// Formats not listed here will not be supported by AImageReader
enum AIMAGE_FORMATS {
/**
* 32 bits RGBA format, 8 bits for each of the four channels.
*
* <p>
* Corresponding formats:
* <ul>
* <li>AHardwareBuffer: AHARDWAREBUFFER_FORMAT_R8G8B8A8_UNORM</li>
* <li>Vulkan: VK_FORMAT_R8G8B8A8_UNORM</li>
* <li>OpenGL ES: GL_RGBA8</li>
* </ul>
* </p>
*
* @see AImage
* @see AImageReader
* @see AHardwareBuffer
*/
AIMAGE_FORMAT_RGBA_8888 = 0x1,
/**
* 32 bits RGBX format, 8 bits for each of the four channels. The values
* of the alpha channel bits are ignored (image is assumed to be opaque).
*
* <p>
* Corresponding formats:
* <ul>
* <li>AHardwareBuffer: AHARDWAREBUFFER_FORMAT_R8G8B8X8_UNORM</li>
* <li>Vulkan: VK_FORMAT_R8G8B8A8_UNORM</li>
* <li>OpenGL ES: GL_RGB8</li>
* </ul>
* </p>
*
* @see AImage
* @see AImageReader
* @see AHardwareBuffer
*/
AIMAGE_FORMAT_RGBX_8888 = 0x2,
/**
* 24 bits RGB format, 8 bits for each of the three channels.
*
* <p>
* Corresponding formats:
* <ul>
* <li>AHardwareBuffer: AHARDWAREBUFFER_FORMAT_R8G8B8_UNORM</li>
* <li>Vulkan: VK_FORMAT_R8G8B8_UNORM</li>
* <li>OpenGL ES: GL_RGB8</li>
* </ul>
* </p>
*
* @see AImage
* @see AImageReader
* @see AHardwareBuffer
*/
AIMAGE_FORMAT_RGB_888 = 0x3,
/**
* 16 bits RGB format, 5 bits for Red channel, 6 bits for Green channel,
* and 5 bits for Blue channel.
*
* <p>
* Corresponding formats:
* <ul>
* <li>AHardwareBuffer: AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM</li>
* <li>Vulkan: VK_FORMAT_R5G6B5_UNORM_PACK16</li>
* <li>OpenGL ES: GL_RGB565</li>
* </ul>
* </p>
*
* @see AImage
* @see AImageReader
* @see AHardwareBuffer
*/
AIMAGE_FORMAT_RGB_565 = 0x4,
/**
* 64 bits RGBA format, 16 bits for each of the four channels.
*
* <p>
* Corresponding formats:
* <ul>
* <li>AHardwareBuffer: AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT</li>
* <li>Vulkan: VK_FORMAT_R16G16B16A16_SFLOAT</li>
* <li>OpenGL ES: GL_RGBA16F</li>
* </ul>
* </p>
*
* @see AImage
* @see AImageReader
* @see AHardwareBuffer
*/
AIMAGE_FORMAT_RGBA_FP16 = 0x16,
/**
* Multi-plane Android YUV 420 format.
*
* <p>This format is a generic YCbCr format, capable of describing any 4:2:0
* chroma-subsampled planar or semiplanar buffer (but not fully interleaved),
* with 8 bits per color sample.</p>
*
* <p>Images in this format are always represented by three separate buffers
* of data, one for each color plane. Additional information always
* accompanies the buffers, describing the row stride and the pixel stride
* for each plane.</p>
*
* <p>The order of planes is guaranteed such that plane #0 is always Y, plane #1 is always
* U (Cb), and plane #2 is always V (Cr).</p>
*
* <p>The Y-plane is guaranteed not to be interleaved with the U/V planes
* (in particular, pixel stride is always 1 in {@link AImage_getPlanePixelStride}).</p>
*
* <p>The U/V planes are guaranteed to have the same row stride and pixel stride, that is, the
* return value of {@link AImage_getPlaneRowStride} for the U/V plane are guaranteed to be the
* same, and the return value of {@link AImage_getPlanePixelStride} for the U/V plane are also
* guaranteed to be the same.</p>
*
* <p>For example, the {@link AImage} object can provide data
* in this format from a {@link ACameraDevice} through an {@link AImageReader} object.</p>
*
* <p>This format is always supported as an output format for the android Camera2 NDK API.</p>
*
* @see AImage
* @see AImageReader
* @see ACameraDevice
*/
AIMAGE_FORMAT_YUV_420_888 = 0x23,
/**
* Compressed JPEG format.
*
* <p>This format is always supported as an output format for the android Camera2 NDK API.</p>
*/
AIMAGE_FORMAT_JPEG = 0x100,
/**
* 16 bits per pixel raw camera sensor image format, usually representing a single-channel
* Bayer-mosaic image.
*
* <p>The layout of the color mosaic, the maximum and minimum encoding
* values of the raw pixel data, the color space of the image, and all other
* needed information to interpret a raw sensor image must be queried from
* the {@link ACameraDevice} which produced the image.</p>
*/
AIMAGE_FORMAT_RAW16 = 0x20,
/**
* Private raw camera sensor image format, a single channel image with implementation depedent
* pixel layout.
*
* <p>AIMAGE_FORMAT_RAW_PRIVATE is a format for unprocessed raw image buffers coming from an
* image sensor. The actual structure of buffers of this format is implementation-dependent.</p>
*
*/
AIMAGE_FORMAT_RAW_PRIVATE = 0x24,
/**
* Android 10-bit raw format.
*
* <p>
* This is a single-plane, 10-bit per pixel, densely packed (in each row),
* unprocessed format, usually representing raw Bayer-pattern images coming
* from an image sensor.
* </p>
* <p>
* In an image buffer with this format, starting from the first pixel of
* each row, each 4 consecutive pixels are packed into 5 bytes (40 bits).
* Each one of the first 4 bytes contains the top 8 bits of each pixel, The
* fifth byte contains the 2 least significant bits of the 4 pixels, the
* exact layout data for each 4 consecutive pixels is illustrated below
* (Pi[j] stands for the jth bit of the ith pixel):
* </p>
* <table>
* <tr>
* <th align="center"></th>
* <th align="center">bit 7</th>
* <th align="center">bit 6</th>
* <th align="center">bit 5</th>
* <th align="center">bit 4</th>
* <th align="center">bit 3</th>
* <th align="center">bit 2</th>
* <th align="center">bit 1</th>
* <th align="center">bit 0</th>
* </tr>
* <tr>
* <td align="center">Byte 0:</td>
* <td align="center">P0[9]</td>
* <td align="center">P0[8]</td>
* <td align="center">P0[7]</td>
* <td align="center">P0[6]</td>
* <td align="center">P0[5]</td>
* <td align="center">P0[4]</td>
* <td align="center">P0[3]</td>
* <td align="center">P0[2]</td>
* </tr>
* <tr>
* <td align="center">Byte 1:</td>
* <td align="center">P1[9]</td>
* <td align="center">P1[8]</td>
* <td align="center">P1[7]</td>
* <td align="center">P1[6]</td>
* <td align="center">P1[5]</td>
* <td align="center">P1[4]</td>
* <td align="center">P1[3]</td>
* <td align="center">P1[2]</td>
* </tr>
* <tr>
* <td align="center">Byte 2:</td>
* <td align="center">P2[9]</td>
* <td align="center">P2[8]</td>
* <td align="center">P2[7]</td>
* <td align="center">P2[6]</td>
* <td align="center">P2[5]</td>
* <td align="center">P2[4]</td>
* <td align="center">P2[3]</td>
* <td align="center">P2[2]</td>
* </tr>
* <tr>
* <td align="center">Byte 3:</td>
* <td align="center">P3[9]</td>
* <td align="center">P3[8]</td>
* <td align="center">P3[7]</td>
* <td align="center">P3[6]</td>
* <td align="center">P3[5]</td>
* <td align="center">P3[4]</td>
* <td align="center">P3[3]</td>
* <td align="center">P3[2]</td>
* </tr>
* <tr>
* <td align="center">Byte 4:</td>
* <td align="center">P3[1]</td>
* <td align="center">P3[0]</td>
* <td align="center">P2[1]</td>
* <td align="center">P2[0]</td>
* <td align="center">P1[1]</td>
* <td align="center">P1[0]</td>
* <td align="center">P0[1]</td>
* <td align="center">P0[0]</td>
* </tr>
* </table>
* <p>
* This format assumes
* <ul>
* <li>a width multiple of 4 pixels</li>
* <li>an even height</li>
* </ul>
* </p>
*
* <pre>size = row stride * height</pre> where the row stride is in <em>bytes</em>,
* not pixels.
*
* <p>
* Since this is a densely packed format, the pixel stride is always 0. The
* application must use the pixel data layout defined in above table to
* access each row data. When row stride is equal to (width * (10 / 8)), there
* will be no padding bytes at the end of each row, the entire image data is
* densely packed. When stride is larger than (width * (10 / 8)), padding
* bytes will be present at the end of each row.
* </p>
* <p>
* For example, the {@link AImage} object can provide data in this format from a
* {@link ACameraDevice} (if supported) through a {@link AImageReader} object.
* The number of planes returned by {@link AImage_getNumberOfPlanes} will always be 1.
* The pixel stride is undefined ({@link AImage_getPlanePixelStride} will return
* {@link AMEDIA_ERROR_UNSUPPORTED}), and the {@link AImage_getPlaneRowStride} described the
* vertical neighboring pixel distance (in bytes) between adjacent rows.
* </p>
*
* @see AImage
* @see AImageReader
* @see ACameraDevice
*/
AIMAGE_FORMAT_RAW10 = 0x25,
/**
* Android 12-bit raw format.
*
* <p>
* This is a single-plane, 12-bit per pixel, densely packed (in each row),
* unprocessed format, usually representing raw Bayer-pattern images coming
* from an image sensor.
* </p>
* <p>
* In an image buffer with this format, starting from the first pixel of each
* row, each two consecutive pixels are packed into 3 bytes (24 bits). The first
* and second byte contains the top 8 bits of first and second pixel. The third
* byte contains the 4 least significant bits of the two pixels, the exact layout
* data for each two consecutive pixels is illustrated below (Pi[j] stands for
* the jth bit of the ith pixel):
* </p>
* <table>
* <tr>
* <th align="center"></th>
* <th align="center">bit 7</th>
* <th align="center">bit 6</th>
* <th align="center">bit 5</th>
* <th align="center">bit 4</th>
* <th align="center">bit 3</th>
* <th align="center">bit 2</th>
* <th align="center">bit 1</th>
* <th align="center">bit 0</th>
* </tr>
* <tr>
* <td align="center">Byte 0:</td>
* <td align="center">P0[11]</td>
* <td align="center">P0[10]</td>
* <td align="center">P0[ 9]</td>
* <td align="center">P0[ 8]</td>
* <td align="center">P0[ 7]</td>
* <td align="center">P0[ 6]</td>
* <td align="center">P0[ 5]</td>
* <td align="center">P0[ 4]</td>
* </tr>
* <tr>
* <td align="center">Byte 1:</td>
* <td align="center">P1[11]</td>
* <td align="center">P1[10]</td>
* <td align="center">P1[ 9]</td>
* <td align="center">P1[ 8]</td>
* <td align="center">P1[ 7]</td>
* <td align="center">P1[ 6]</td>
* <td align="center">P1[ 5]</td>
* <td align="center">P1[ 4]</td>
* </tr>
* <tr>
* <td align="center">Byte 2:</td>
* <td align="center">P1[ 3]</td>
* <td align="center">P1[ 2]</td>
* <td align="center">P1[ 1]</td>
* <td align="center">P1[ 0]</td>
* <td align="center">P0[ 3]</td>
* <td align="center">P0[ 2]</td>
* <td align="center">P0[ 1]</td>
* <td align="center">P0[ 0]</td>
* </tr>
* </table>
* <p>
* This format assumes
* <ul>
* <li>a width multiple of 4 pixels</li>
* <li>an even height</li>
* </ul>
* </p>
*
* <pre>size = row stride * height</pre> where the row stride is in <em>bytes</em>,
* not pixels.
*
* <p>
* Since this is a densely packed format, the pixel stride is always 0. The
* application must use the pixel data layout defined in above table to
* access each row data. When row stride is equal to (width * (12 / 8)), there
* will be no padding bytes at the end of each row, the entire image data is
* densely packed. When stride is larger than (width * (12 / 8)), padding
* bytes will be present at the end of each row.
* </p>
* <p>
* For example, the {@link AImage} object can provide data in this format from a
* {@link ACameraDevice} (if supported) through a {@link AImageReader} object.
* The number of planes returned by {@link AImage_getNumberOfPlanes} will always be 1.
* The pixel stride is undefined ({@link AImage_getPlanePixelStride} will return
* {@link AMEDIA_ERROR_UNSUPPORTED}), and the {@link AImage_getPlaneRowStride} described the
* vertical neighboring pixel distance (in bytes) between adjacent rows.
* </p>
*
* @see AImage
* @see AImageReader
* @see ACameraDevice
*/
AIMAGE_FORMAT_RAW12 = 0x26,
/**
* Android dense depth image format.
*
* <p>Each pixel is 16 bits, representing a depth ranging measurement from a depth camera or
* similar sensor. The 16-bit sample consists of a confidence value and the actual ranging
* measurement.</p>
*
* <p>The confidence value is an estimate of correctness for this sample. It is encoded in the
* 3 most significant bits of the sample, with a value of 0 representing 100% confidence, a
* value of 1 representing 0% confidence, a value of 2 representing 1/7, a value of 3
* representing 2/7, and so on.</p>
*
* <p>As an example, the following sample extracts the range and confidence from the first pixel
* of a DEPTH16-format {@link AImage}, and converts the confidence to a floating-point value
* between 0 and 1.f inclusive, with 1.f representing maximum confidence:
*
* <pre>
* uint16_t* data;
* int dataLength;
* AImage_getPlaneData(image, 0, (uint8_t**)&data, &dataLength);
* uint16_t depthSample = data[0];
* uint16_t depthRange = (depthSample & 0x1FFF);
* uint16_t depthConfidence = ((depthSample >> 13) & 0x7);
* float depthPercentage = depthConfidence == 0 ? 1.f : (depthConfidence - 1) / 7.f;
* </pre>
* </p>
*
* <p>This format assumes
* <ul>
* <li>an even width</li>
* <li>an even height</li>
* <li>a horizontal stride multiple of 16 pixels</li>
* </ul>
* </p>
*
* <pre> y_size = stride * height </pre>
*
* When produced by a camera, the units for the range are millimeters.
*/
AIMAGE_FORMAT_DEPTH16 = 0x44363159,
/**
* Android sparse depth point cloud format.
*
* <p>A variable-length list of 3D points plus a confidence value, with each point represented
* by four floats; first the X, Y, Z position coordinates, and then the confidence value.</p>
*
* <p>The number of points is ((size of the buffer in bytes) / 16).
*
* <p>The coordinate system and units of the position values depend on the source of the point
* cloud data. The confidence value is between 0.f and 1.f, inclusive, with 0 representing 0%
* confidence and 1.f representing 100% confidence in the measured position values.</p>
*
* <p>As an example, the following code extracts the first depth point in a DEPTH_POINT_CLOUD
* format {@link AImage}:
* <pre>
* float* data;
* int dataLength;
* AImage_getPlaneData(image, 0, (uint8_t**)&data, &dataLength);
* float x = data[0];
* float y = data[1];
* float z = data[2];
* float confidence = data[3];
* </pre>
*
*/
AIMAGE_FORMAT_DEPTH_POINT_CLOUD = 0x101,
/**
* Android private opaque image format.
*
* <p>The choices of the actual format and pixel data layout are entirely up to the
* device-specific and framework internal implementations, and may vary depending on use cases
* even for the same device. Also note that the contents of these buffers are not directly
* accessible to the application.</p>
*
* <p>When an {@link AImage} of this format is obtained from an {@link AImageReader} or
* {@link AImage_getNumberOfPlanes()} method will return zero.</p>
*/
AIMAGE_FORMAT_PRIVATE = 0x22
};
/**
* Data type describing an cropped rectangle returned by {@link AImage_getCropRect}.
*
* <p>Note that the right and bottom coordinates are exclusive, so the width of the rectangle is
* (right - left) and the height of the rectangle is (bottom - top).</p>
*/
typedef struct AImageCropRect {
int32_t left;
int32_t top;
int32_t right;
int32_t bottom;
} AImageCropRect;
#if __ANDROID_API__ >= 24
/**
* Return the image back the the system and delete the AImage object from memory.
*
* <p>Do NOT use the image pointer after this method returns.
* Note that if the parent {@link AImageReader} is closed, all the {@link AImage} objects acquired
* from the parent reader will be returned to system. All AImage_* methods except this method will
* return {@link AMEDIA_ERROR_INVALID_OBJECT}. Application still needs to call this method on those
* {@link AImage} objects to fully delete the {@link AImage} object from memory.</p>
*
* @param image The {@link AImage} to be deleted.
*/
void AImage_delete(AImage* image);
/**
* Query the width of the input {@link AImage}.
*
* @param image the {@link AImage} of interest.
* @param width the width of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or width is NULL.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li></ul>
*/
media_status_t AImage_getWidth(const AImage* image, /*out*/int32_t* width);
/**
* Query the height of the input {@link AImage}.
*
* @param image the {@link AImage} of interest.
* @param height the height of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or height is NULL.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li></ul>
*/
media_status_t AImage_getHeight(const AImage* image, /*out*/int32_t* height);
/**
* Query the format of the input {@link AImage}.
*
* <p>The format value will be one of AIMAGE_FORMAT_* enum value.</p>
*
* @param image the {@link AImage} of interest.
* @param format the format of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or format is NULL.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li></ul>
*/
media_status_t AImage_getFormat(const AImage* image, /*out*/int32_t* format);
/**
* Query the cropped rectangle of the input {@link AImage}.
*
* <p>The crop rectangle specifies the region of valid pixels in the image, using coordinates in the
* largest-resolution plane.</p>
*
* @param image the {@link AImage} of interest.
* @param rect the cropped rectangle of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or rect is NULL.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li></ul>
*/
media_status_t AImage_getCropRect(const AImage* image, /*out*/AImageCropRect* rect);
/**
* Query the timestamp of the input {@link AImage}.
*
* <p>
* The timestamp is measured in nanoseconds, and is normally monotonically increasing. The
* timestamps for the images from different sources may have different timebases therefore may not
* be comparable. The specific meaning and timebase of the timestamp depend on the source providing
* images. For images generated by camera, the timestamp value will match
* {@link ACAMERA_SENSOR_TIMESTAMP} of the {@link ACameraMetadata} in
* {@link ACameraCaptureSession_captureCallbacks#onCaptureStarted} and
* {@link ACameraCaptureSession_captureCallbacks#onCaptureCompleted} callback.
* </p>
*
* @param image the {@link AImage} of interest.
* @param timestampNs the timestamp of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or timestampNs is NULL.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li></ul>
*/
media_status_t AImage_getTimestamp(const AImage* image, /*out*/int64_t* timestampNs);
/**
* Query the number of planes of the input {@link AImage}.
*
* <p>The number of plane of an {@link AImage} is determined by its format, which can be queried by
* {@link AImage_getFormat} method.</p>
*
* @param image the {@link AImage} of interest.
* @param numPlanes the number of planes of the image will be filled here if the method call
* succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or numPlanes is NULL.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li></ul>
*/
media_status_t AImage_getNumberOfPlanes(const AImage* image, /*out*/int32_t* numPlanes);
/**
* Query the pixel stride of the input {@link AImage}.
*
* <p>This is the distance between two consecutive pixel values in a row of pixels. It may be
* larger than the size of a single pixel to account for interleaved image data or padded formats.
* Note that pixel stride is undefined for some formats such as {@link AIMAGE_FORMAT_RAW_PRIVATE},
* and calling this method on images of these formats will cause {@link AMEDIA_ERROR_UNSUPPORTED}
* being returned.
* For formats where pixel stride is well defined, the pixel stride is always greater than 0.</p>
*
* @param image the {@link AImage} of interest.
* @param planeIdx the index of the plane. Must be less than the number of planes of input image.
* @param pixelStride the pixel stride of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or pixelStride is NULL, or planeIdx
* is out of the range of [0, numOfPlanes - 1].</li>
* <li>{@link AMEDIA_ERROR_UNSUPPORTED} if pixel stride is undefined for the format of input
* image.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li>
* <li>{@link AMEDIA_IMGREADER_CANNOT_LOCK_IMAGE} if the {@link AImage} cannot be locked
* for CPU access.</li></ul>
*/
media_status_t AImage_getPlanePixelStride(
const AImage* image, int planeIdx, /*out*/int32_t* pixelStride);
/**
* Query the row stride of the input {@link AImage}.
*
* <p>This is the distance between the start of two consecutive rows of pixels in the image. Note
* that row stried is undefined for some formats such as {@link AIMAGE_FORMAT_RAW_PRIVATE}, and
* calling this method on images of these formats will cause {@link AMEDIA_ERROR_UNSUPPORTED}
* being returned.
* For formats where row stride is well defined, the row stride is always greater than 0.</p>
*
* @param image the {@link AImage} of interest.
* @param planeIdx the index of the plane. Must be less than the number of planes of input image.
* @param rowStride the row stride of the image will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or rowStride is NULL, or planeIdx
* is out of the range of [0, numOfPlanes - 1].</li>
* <li>{@link AMEDIA_ERROR_UNSUPPORTED} if row stride is undefined for the format of input
* image.</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li>
* <li>{@link AMEDIA_IMGREADER_CANNOT_LOCK_IMAGE} if the {@link AImage} cannot be locked
* for CPU access.</li></ul>
*/
media_status_t AImage_getPlaneRowStride(
const AImage* image, int planeIdx, /*out*/int32_t* rowStride);
/**
* Get the data pointer of the input image for direct application access.
*
* <p>Note that once the {@link AImage} or the parent {@link AImageReader} is deleted, the data
* pointer from previous AImage_getPlaneData call becomes invalid. Do NOT use it after the
* {@link AImage} or the parent {@link AImageReader} is deleted.</p>
*
* @param image the {@link AImage} of interest.
* @param planeIdx the index of the plane. Must be less than the number of planes of input image.
* @param data the data pointer of the image will be filled here if the method call succeeeds.
* @param dataLength the valid length of data will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image, data or dataLength is NULL, or
* planeIdx is out of the range of [0, numOfPlanes - 1].</li>
* <li>{@link AMEDIA_ERROR_INVALID_OBJECT} if the {@link AImageReader} generated this
* image has been deleted.</li>
* <li>{@link AMEDIA_IMGREADER_CANNOT_LOCK_IMAGE} if the {@link AImage} cannot be locked
* for CPU access.</li></ul>
*/
media_status_t AImage_getPlaneData(
const AImage* image, int planeIdx,
/*out*/uint8_t** data, /*out*/int* dataLength);
#endif /* __ANDROID_API__ >= 24 */
#if __ANDROID_API__ >= 26
/**
* Return the image back the the system and delete the AImage object from memory asynchronously.
*
* <p>Similar to {@link AImage_delete}, do NOT use the image pointer after this method returns.
* However, the caller can still hold on to the {@link AHardwareBuffer} returned from this image and
* signal the release of the hardware buffer back to the {@link AImageReader}'s queue using
* releaseFenceFd.</p>
*
* @param image The {@link AImage} to be deleted.
* @param releaseFenceFd A sync fence fd defined in {@link sync.h}, which signals the release of
* underlying {@link AHardwareBuffer}.
*
* @see sync.h
*/
void AImage_deleteAsync(AImage* image, int releaseFenceFd);
/**
* Get the hardware buffer handle of the input image intended for GPU and/or hardware access.
*
* <p>Note that no reference on the returned {@link AHardwareBuffer} handle is acquired
* automatically. Once the {@link AImage} or the parent {@link AImageReader} is deleted, the
* {@link AHardwareBuffer} handle from previous {@link AImage_getHardwareBuffer} becomes
* invalid.</p>
*
* <p>If the caller ever needs to hold on a reference to the {@link AHardwareBuffer} handle after
* the {@link AImage} or the parent {@link AImageReader} is deleted, it must call {@link
* AHardwareBuffer_acquire} to acquire an extra reference, and call {@link AHardwareBuffer_release}
* once it has finished using it in order to properly deallocate the underlying memory managed by
* {@link AHardwareBuffer}. If the caller has acquired extra reference on an {@link AHardwareBuffer}
* returned from this function, it must also register a listener using the function
* {@link AImageReader_setBufferRemovedListener} to be notified when the buffer is no longer used
* by {@link AImageReader}.</p>
*
* @param image the {@link AImage} of interest.
* @param outBuffer The memory area pointed to by buffer will contain the acquired AHardwareBuffer
* handle.
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if image or buffer is NULL</li></ul>
*
* @see AImageReader_ImageCallback
*/
media_status_t AImage_getHardwareBuffer(const AImage* image, /*out*/AHardwareBuffer** buffer);
#endif /* __ANDROID_API__ >= 26 */
__END_DECLS
#endif //_NDK_IMAGE_H
/** @} */