fuchsia / third_party / android / platform / frameworks / av / refs/tags/android-10.0.0_r20 / . / media / libmedia / include / media / LinearMap.h

/* | |

* Copyright 2015 The Android Open Source Project | |

* | |

* Licensed under the Apache License, Version 2.0 (the "License"); | |

* you may not use this file except in compliance with the License. | |

* You may obtain a copy of the License at | |

* | |

* http://www.apache.org/licenses/LICENSE-2.0 | |

* | |

* Unless required by applicable law or agreed to in writing, software | |

* distributed under the License is distributed on an "AS IS" BASIS, | |

* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |

* See the License for the specific language governing permissions and | |

* limitations under the License. | |

*/ | |

#ifndef ANDROID_LINEAR_MAP_H | |

#define ANDROID_LINEAR_MAP_H | |

#include <stdint.h> | |

namespace android { | |

/* | |

A general purpose lookup utility that defines a mapping between X and Y as a | |

continuous set of line segments with shared (x, y) end-points. | |

The (x, y) points must be added in order, monotonically increasing in both x and y; | |

a log warning is emitted if this does not happen (See general usage notes below). | |

A limited history of (x, y) points is kept for space reasons (See general usage notes). | |

In AudioFlinger, we use the LinearMap to associate track frames to | |

sink frames. When we want to obtain a client track timestamp, we first | |

get a timestamp from the sink. The sink timestamp's position (mPosition) | |

corresponds to the sink frames written. We use LinearMap to figure out which track frame | |

the sink frame corresponds to. This allows us to substitute a track frame for the | |

the sink frame (keeping the mTime identical) and return that timestamp back to the client. | |

The method findX() can be used to retrieve an x value from a given y value and is | |

used for timestamps, similarly for findY() which is provided for completeness. | |

We update the (track frame, sink frame) points in the LinearMap each time we write data | |

to the sink by the AudioFlinger PlaybackThread (MixerThread). | |

AudioFlinger Timestamp Notes: | |

1) Example: Obtaining a track timestamp during playback. In this case, the LinearMap | |

looks something like this: | |

Track Frame Sink Frame | |

(track start) | |

0 50000 (track starts here, the sink may already be running) | |

1000 51000 | |

2000 52000 | |

When we request a track timestamp, we call the sink getTimestamp() and get for example | |

mPosition = 51020. Using the LinearMap, we find we have played to track frame 1020. | |

We substitute the sink mPosition of 51020 with the track position 1020, | |

and return that timestamp to the app. | |

2) Example: Obtaining a track timestamp duing pause. In this case, the LinearMap | |

looks something like this: | |

Track Frame Sink Frame | |

... (some time has gone by) | |

15000 30000 | |

16000 31000 | |

17000 32000 | |

(pause here) | |

(suppose we call sink getTimestamp() here and get sink mPosition = 31100; that means | |

we have played to track frame 16100. The track timestamp mPosition will | |

continue to advance until the sink timestamp returns a value of mPosition | |

greater than 32000, corresponding to track frame 17000 when the pause was called). | |

17000 33000 | |

17000 34000 | |

... | |

3) If the track underruns, it appears as if a pause was called on that track. | |

4) If there is an underrun in the HAL layer, then it may be possible that | |

the sink getTimestamp() will return a value greater than the number of frames written | |

(it should always be less). This should be rare, if not impossible by some | |

HAL implementations of the sink getTimestamp. In that case, timing is lost | |

and we will return the most recent track frame written. | |

5) When called with no points in the map, findX() returns the start value (default 0). | |

This is consistent with starting after a stop() or flush(). | |

6) Resuming after Track standby will be similar to coming out of pause, as the HAL ensures | |

framesWritten() and getTimestamp() are contiguous for non-offloaded/direct tracks. | |

7) LinearMap works for different speeds and sample rates as it uses | |

linear interpolation. Since AudioFlinger only updates speed and sample rate | |

exactly at the sample points pushed into the LinearMap, the returned values | |

from findX() and findY() are accurate regardless of how many speed or sample | |

rate changes are made, so long as the coordinate looked up is within the | |

sample history. | |

General usage notes: | |

1) In order for the LinearMap to work reliably, you cannot look backwards more | |

than the size of its circular buffer history, set upon creation (typically 16). | |

If you look back further, the position is extrapolated either from a passed in | |

extrapolation parameter or from the oldest line segment. | |

2) Points must monotonically increase in x and y. The increment between adjacent | |

points cannot be greater than signed 32 bits. Wrap in the x, y coordinates are supported, | |

since we use differences in our computation. | |

3) If the frame data is discontinuous (due to stop or flush) call reset() to clear | |

the sample counter. | |

4) If (x, y) are not strictly monotonic increasing, i.e. (x2 > x1) and (y2 > y1), | |

then one or both of the inverses y = f(x) or x = g(y) may have multiple solutions. | |

In that case, the most recent solution is returned by findX() or findY(). We | |

do not warn if (x2 == x1) or (y2 == y1), but we do logcat warn if (x2 < x1) or | |

(y2 < y1). | |

5) Due to rounding it is possible x != findX(findY(x)) or y != findY(findX(y)) | |

even when the inverse exists. Nevertheless, the values should be close. | |

*/ | |

template <typename T> | |

class LinearMap { | |

public: | |

// This enumeration describes the reliability of the findX() or findY() estimation | |

// in descending order. | |

enum FindMethod { | |

FIND_METHOD_INTERPOLATION, // High reliability (errors due to rounding) | |

FIND_METHOD_FORWARD_EXTRAPOLATION, // Reliability based on no future speed changes | |

FIND_METHOD_BACKWARD_EXTRAPOLATION, // Reliability based on prior estimated speed | |

FIND_METHOD_START_VALUE, // No samples in history, using start value | |

}; | |

explicit LinearMap(size_t size) | |

: mSize(size), | |

mPos(0), // a circular buffer, so could start anywhere. the first sample is at 1. | |

mSamples(0), | |

// mStepValid(false), // only valid if mSamples > 1 | |

// mExtrapolateTail(false), // only valid if mSamples > 0 | |

mX(new T[size]), | |

mY(new T[size]) { } | |

~LinearMap() { | |

delete[] mX; | |

delete[] mY; | |

} | |

// Add a new sample point to the linear map. | |

// | |

// The difference between the new sample and the previous sample | |

// in the x or y coordinate must be less than INT32_MAX for purposes | |

// of the linear interpolation or extrapolation. | |

// | |

// The value should be monotonic increasing (e.g. diff >= 0); | |

// logcat warnings are issued if they are not. | |

__attribute__((no_sanitize("integer"))) | |

void push(T x, T y) { | |

// Assumption: we assume x, y are monotonic increasing values, | |

// which (can) wrap in precision no less than 32 bits and have | |

// "step" or differences between adjacent points less than 32 bits. | |

if (mSamples > 0) { | |

const bool lastStepValid = mStepValid; | |

int32_t xdiff; | |

int32_t ydiff; | |

// check difference assumption here | |

mStepValid = checkedDiff(&xdiff, x, mX[mPos], "x") | |

& /* bitwise AND to always warn for ydiff, though logical AND is also OK */ | |

checkedDiff(&ydiff, y, mY[mPos], "y"); | |

// Optimization: do not add a new sample if the line segment would | |

// simply extend the previous line segment. This extends the useful | |

// history by removing redundant points. | |

if (mSamples > 1 && mStepValid && lastStepValid) { | |

const size_t prev = previousPosition(); | |

const int32_t xdiff2 = x - mX[prev]; | |

const int32_t ydiff2 = y - mY[prev]; | |

// if both current step and previous step are valid (non-negative and | |

// less than INT32_MAX for precision greater than 4 bytes) | |

// then the sum of the two steps is valid when the | |

// int32_t difference is non-negative. | |

if (xdiff2 >= 0 && ydiff2 >= 0 | |

&& (int64_t)xdiff2 * ydiff == (int64_t)ydiff2 * xdiff) { | |

// ALOGD("reusing sample! (%u, %u) sample depth %zd", x, y, mSamples); | |

mX[mPos] = x; | |

mY[mPos] = y; | |

return; | |

} | |

} | |

} | |

if (++mPos >= mSize) { | |

mPos = 0; | |

} | |

if (mSamples < mSize) { | |

mExtrapolateTail = false; | |

++mSamples; | |

} else { | |

// we enable extrapolation beyond the oldest sample | |

// if the sample buffers are completely full and we | |

// no longer know the full history. | |

mExtrapolateTail = true; | |

} | |

mX[mPos] = x; | |

mY[mPos] = y; | |

} | |

// clear all samples from the circular array | |

void reset() { | |

// no need to reset mPos, we use a circular buffer. | |

// computed values such as mStepValid are set after a subsequent push(). | |

mSamples = 0; | |

} | |

// returns true if LinearMap contains at least one sample. | |

bool hasData() const { | |

return mSamples != 0; | |

} | |

// find the corresponding X point from a Y point. | |

// See findU for details. | |

__attribute__((no_sanitize("integer"))) | |

T findX(T y, FindMethod *method = NULL, double extrapolation = 0.0, T startValue = 0) const { | |

return findU(y, mX, mY, method, extrapolation, startValue); | |

} | |

// find the corresponding Y point from a X point. | |

// See findU for details. | |

__attribute__((no_sanitize("integer"))) | |

T findY(T x, FindMethod *method = NULL, double extrapolation = 0.0, T startValue = 0) const { | |

return findU(x, mY, mX, method, extrapolation, startValue); | |

} | |

protected: | |

// returns false if the diff is out of int32_t bounds or negative. | |

__attribute__((no_sanitize("integer"))) | |

static inline bool checkedDiff(int32_t *diff, T x2, T x1, const char *coord) { | |

if (sizeof(T) >= 8) { | |

const int64_t diff64 = x2 - x1; | |

*diff = (int32_t)diff64; // intentionally lose precision | |

if (diff64 > INT32_MAX) { | |

ALOGW("LinearMap: %s overflow diff(%lld) from %llu - %llu exceeds INT32_MAX", | |

coord, (long long)diff64, | |

(unsigned long long)x2, (unsigned long long)x1); | |

return false; | |

} else if (diff64 < 0) { | |

ALOGW("LinearMap: %s negative diff(%lld) from %llu - %llu", | |

coord, (long long)diff64, | |

(unsigned long long)x2, (unsigned long long)x1); | |

return false; | |

} | |

return true; | |

} | |

// for 32 bit integers we cannot detect overflow (it | |

// shows up as a negative difference). | |

*diff = x2 - x1; | |

if (*diff < 0) { | |

ALOGW("LinearMap: %s negative diff(%d) from %u - %u", | |

coord, *diff, (unsigned)x2, (unsigned)x1); | |

return false; | |

} | |

return true; | |

} | |

// Returns the previous position in the mSamples array | |

// going backwards back steps. | |

// | |

// Parameters: | |

// back: number of backward steps, cannot be less than zero or greater than mSamples. | |

// | |

__attribute__((no_sanitize("integer"))) | |

size_t previousPosition(ssize_t back = 1) const { | |

LOG_ALWAYS_FATAL_IF(back < 0 || (size_t)back > mSamples, "Invalid back(%zd)", back); | |

ssize_t position = mPos - back; | |

if (position < 0) position += mSize; | |

return (size_t)position; | |

} | |

// A generic implementation of finding the "other coordinate" with coordinates | |

// (u, v) = (x, y) or (u, v) = (y, x). | |

// | |

// Parameters: | |

// uArray: the u axis samples. | |

// vArray: the v axis samples. | |

// method: [out] how the returned value was computed. | |

// extrapolation: the slope used when extrapolating from the | |

// first sample value or the last sample value in the history. | |

// If mExtrapolateTail is set, the slope of the last line segment | |

// is used if the extrapolation parameter is zero to continue the tail of history. | |

// At this time, we do not use a different value for forward extrapolation from the | |

// head of history from backward extrapolation from the tail of history. | |

// TODO: back extrapolation value could be stored along with mX, mY in history. | |

// startValue: used only when there are no samples in history. One can detect | |

// whether there are samples in history by the method hasData(). | |

// | |

__attribute__((no_sanitize("integer"))) | |

T findU(T v, T *uArray, T *vArray, FindMethod *method, | |

double extrapolation, T startValue) const { | |

if (mSamples == 0) { | |

if (method != NULL) { | |

*method = FIND_METHOD_START_VALUE; | |

} | |

return startValue; // nothing yet | |

} | |

ssize_t previous = 0; | |

int32_t diff = 0; | |

for (ssize_t i = 0; i < (ssize_t)mSamples; ++i) { | |

size_t current = previousPosition(i); | |

// Assumption: even though the type "T" may have precision greater | |

// than 32 bits, the difference between adjacent points is limited to 32 bits. | |

diff = v - vArray[current]; | |

if (diff >= 0 || | |

(i == (ssize_t)mSamples - 1 && mExtrapolateTail && extrapolation == 0.0)) { | |

// ALOGD("depth = %zd out of %zd", i, limit); | |

if (i == 0) { | |

if (method != NULL) { | |

*method = FIND_METHOD_FORWARD_EXTRAPOLATION; | |

} | |

return uArray[current] + diff * extrapolation; | |

} | |

// interpolate / extrapolate: For this computation, we | |

// must use differentials here otherwise we have inconsistent | |

// values on modulo wrap. previous is always valid here since | |

// i > 0. we also perform rounding with the assumption | |

// that uStep, vStep, and diff are non-negative. | |

int32_t uStep = uArray[previous] - uArray[current]; // non-negative | |

int32_t vStep = vArray[previous] - vArray[current]; // positive | |

T u = uStep <= 0 || vStep <= 0 ? // we do not permit negative ustep or vstep | |

uArray[current] | |

: ((int64_t)diff * uStep + (vStep >> 1)) / vStep + uArray[current]; | |

// ALOGD("u:%u diff:%d uStep:%d vStep:%d u_current:%d", | |

// u, diff, uStep, vStep, uArray[current]); | |

if (method != NULL) { | |

*method = (diff >= 0) ? | |

FIND_METHOD_INTERPOLATION : FIND_METHOD_BACKWARD_EXTRAPOLATION; | |

} | |

return u; | |

} | |

previous = current; | |

} | |

// previous is always valid here. | |

if (method != NULL) { | |

*method = FIND_METHOD_BACKWARD_EXTRAPOLATION; | |

} | |

return uArray[previous] + diff * extrapolation; | |

} | |

private: | |

const size_t mSize; // Size of mX and mY arrays (history). | |

size_t mPos; // Index in mX and mY of last pushed data; | |

// (incremented after push) [0, mSize - 1]. | |

size_t mSamples; // Number of valid samples in the array [0, mSize]. | |

bool mStepValid; // Last sample step was valid (non-negative) | |

bool mExtrapolateTail; // extrapolate tail using oldest line segment | |

T * const mX; // History of X values as a circular array. | |

T * const mY; // History of Y values as a circular array. | |

}; | |

} // namespace android | |

#endif // ANDROID_LINEAR_MAP_H |