/*
 * Copyright (C) 2004-2010 NXP Software
 * Copyright (C) 2010 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "BIQUAD.h"
#include "BQ_2I_D16F16Css_TRC_WRA_01_Private.h"
#include "LVM_Macros.h"


/**************************************************************************
 ASSUMPTIONS:
 COEFS-
 pBiquadState->coefs[0] is A2, pBiquadState->coefs[1] is A1
 pBiquadState->coefs[2] is A0, pBiquadState->coefs[3] is -B2
 pBiquadState->coefs[4] is -B1, these are in Q15 format

 DELAYS-
 pBiquadState->pDelays[0] is x(n-1)L in Q0 format
 pBiquadState->pDelays[1] is x(n-1)R in Q0 format
 pBiquadState->pDelays[2] is x(n-2)L in Q0 format
 pBiquadState->pDelays[3] is x(n-2)R in Q0 format
 pBiquadState->pDelays[4] is y(n-1)L in Q0 format
 pBiquadState->pDelays[5] is y(n-1)R in Q0 format
 pBiquadState->pDelays[6] is y(n-2)L in Q0 format
 pBiquadState->pDelays[7] is y(n-2)R in Q0 format
***************************************************************************/
#ifdef BUILD_FLOAT
void BQ_2I_D16F16C15_TRC_WRA_01 ( Biquad_FLOAT_Instance_t       *pInstance,
                                  LVM_FLOAT               *pDataIn,
                                  LVM_FLOAT               *pDataOut,
                                  LVM_INT16               NrSamples)
    {
        LVM_FLOAT  ynL,ynR;
        LVM_INT16 ii;
        PFilter_State_FLOAT pBiquadState = (PFilter_State_FLOAT) pInstance;

         for (ii = NrSamples; ii != 0; ii--)
         {


            /**************************************************************************
                            PROCESSING OF THE LEFT CHANNEL
            ***************************************************************************/
            // ynL=A2  * x(n-2)L
            ynL = (LVM_FLOAT)pBiquadState->coefs[0] * pBiquadState->pDelays[2];

            // ynL+=A1  * x(n-1)L
            ynL += (LVM_FLOAT)pBiquadState->coefs[1] * pBiquadState->pDelays[0];

            // ynL+=A0  * x(n)L
            ynL += (LVM_FLOAT)pBiquadState->coefs[2] * (*pDataIn);

            // ynL+= ( -B2  * y(n-2)L
            ynL += (LVM_FLOAT)pBiquadState->coefs[3] * pBiquadState->pDelays[6];

            // ynL+=( -B1  * y(n-1)L
            ynL += (LVM_FLOAT)pBiquadState->coefs[4] * pBiquadState->pDelays[4];


            /**************************************************************************
                            PROCESSING OF THE RIGHT CHANNEL
            ***************************************************************************/
            // ynR=A2  * x(n-2)R
            ynR = (LVM_FLOAT)pBiquadState->coefs[0] * pBiquadState->pDelays[3];

            // ynR+=A1  * x(n-1)R
            ynR += (LVM_FLOAT)pBiquadState->coefs[1] * pBiquadState->pDelays[1];

            // ynR+=A0  * x(n)R
            ynR += (LVM_FLOAT)pBiquadState->coefs[2] * (*(pDataIn+1));

            // ynR+= ( -B2  * y(n-2)R  )
            ynR += (LVM_FLOAT)pBiquadState->coefs[3] * pBiquadState->pDelays[7];

            // ynR+=( -B1  * y(n-1)R  )
            ynR += (LVM_FLOAT)pBiquadState->coefs[4] * pBiquadState->pDelays[5];


            /**************************************************************************
                            UPDATING THE DELAYS
            ***************************************************************************/
            pBiquadState->pDelays[7] = pBiquadState->pDelays[5];  // y(n-2)R=y(n-1)R
            pBiquadState->pDelays[6] = pBiquadState->pDelays[4];  // y(n-2)L=y(n-1)L
            pBiquadState->pDelays[3] = pBiquadState->pDelays[1];  // x(n-2)R=x(n-1)R
            pBiquadState->pDelays[2] = pBiquadState->pDelays[0];  // x(n-2)L=x(n-1)L
            pBiquadState->pDelays[5] = ynR;                       // Update y(n-1)R
            pBiquadState->pDelays[4] = ynL;                       // Update y(n-1)L
            pBiquadState->pDelays[0] = (*pDataIn++);              // Update x(n-1)L
            pBiquadState->pDelays[1] = (*pDataIn++);              // Update x(n-1)R

            /**************************************************************************
                            WRITING THE OUTPUT
            ***************************************************************************/
            *pDataOut++ = (LVM_FLOAT)ynL; // Write Left output
            *pDataOut++ = (LVM_FLOAT)ynR; // Write Right ouput

        }

    }
#else
void BQ_2I_D16F16C15_TRC_WRA_01 ( Biquad_Instance_t       *pInstance,
                                  LVM_INT16               *pDataIn,
                                  LVM_INT16               *pDataOut,
                                  LVM_INT16               NrSamples)
    {
        LVM_INT32  ynL,ynR;
        LVM_INT16 ii;
        PFilter_State pBiquadState = (PFilter_State) pInstance;

         for (ii = NrSamples; ii != 0; ii--)
         {


            /**************************************************************************
                            PROCESSING OF THE LEFT CHANNEL
            ***************************************************************************/
            // ynL=A2 (Q15) * x(n-2)L (Q0) in Q15
            ynL=(LVM_INT32)pBiquadState->coefs[0]* pBiquadState->pDelays[2];

            // ynL+=A1 (Q15) * x(n-1)L (Q0) in Q15
            ynL+=(LVM_INT32)pBiquadState->coefs[1]* pBiquadState->pDelays[0];

            // ynL+=A0 (Q15) * x(n)L (Q0) in Q15
            ynL+=(LVM_INT32)pBiquadState->coefs[2]* (*pDataIn);

            // ynL+= ( -B2 (Q15) * y(n-2)L (Q0) ) in Q15
            ynL+=(LVM_INT32)pBiquadState->coefs[3]*pBiquadState->pDelays[6];

            // ynL+=( -B1 (Q15) * y(n-1)L (Q0) ) in Q15
            ynL+=(LVM_INT32)pBiquadState->coefs[4]*pBiquadState->pDelays[4];

            ynL=ynL>>15; // ynL in Q0 format

            /**************************************************************************
                            PROCESSING OF THE RIGHT CHANNEL
            ***************************************************************************/
            // ynR=A2 (Q15) * x(n-2)R (Q0) in Q15
            ynR=(LVM_INT32)pBiquadState->coefs[0]*pBiquadState->pDelays[3];

            // ynR+=A1 (Q15) * x(n-1)R (Q0) in Q15
            ynR+=(LVM_INT32)pBiquadState->coefs[1]*pBiquadState->pDelays[1];

            // ynR+=A0 (Q15) * x(n)R (Q0) in Q15
            ynR+=(LVM_INT32)pBiquadState->coefs[2]*(*(pDataIn+1));

            // ynR+= ( -B2 (Q15) * y(n-2)R (Q0) ) in Q15
            ynR+=(LVM_INT32)pBiquadState->coefs[3]*pBiquadState->pDelays[7];

            // ynR+=( -B1 (Q15) * y(n-1)R (Q0) ) in Q15
            ynR+=(LVM_INT32)pBiquadState->coefs[4]*pBiquadState->pDelays[5];

            ynR=ynR>>15; // ynL in Q0 format
            /**************************************************************************
                            UPDATING THE DELAYS
            ***************************************************************************/
            pBiquadState->pDelays[7]=pBiquadState->pDelays[5];  // y(n-2)R=y(n-1)R
            pBiquadState->pDelays[6]=pBiquadState->pDelays[4];  // y(n-2)L=y(n-1)L
            pBiquadState->pDelays[3]=pBiquadState->pDelays[1];  // x(n-2)R=x(n-1)R
            pBiquadState->pDelays[2]=pBiquadState->pDelays[0];  // x(n-2)L=x(n-1)L
            pBiquadState->pDelays[5]=ynR;                       // Update y(n-1)R in Q0
            pBiquadState->pDelays[4]=ynL;                       // Update y(n-1)L in Q0
            pBiquadState->pDelays[0]=(*pDataIn++);              // Update x(n-1)L in Q0
            pBiquadState->pDelays[1]=(*pDataIn++);              // Update x(n-1)R in Q0

            /**************************************************************************
                            WRITING THE OUTPUT
            ***************************************************************************/
            *pDataOut++=(LVM_INT16)ynL; // Write Left output in Q0
            *pDataOut++=(LVM_INT16)ynR; // Write Right ouput in Q0

        }

    }
#endif