pylintrc - third_party/android/platform/external/avb - Git at Google

 # Copyright 2016 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 [MASTER]

 # Specify a configuration file.
 #rcfile=

 # Python code to execute, usually for sys.path manipulation such as
 # pygtk.require().
 #init-hook=

 # Profiled execution.
 profile=no

 # Add files or directories to the blacklist. They should be base names, not
 # paths.
 ignore=CVS,.svn,.git
 ignore-patterns=.*pb2\.py,.*pb2_grpc\.py

 # Pickle collected data for later comparisons.
 persistent=yes

 # List of plugins (as comma separated values of python modules names) to load,
 # usually to register additional checkers.
 load-plugins=
     pylint.extensions.bad_builtin,
     pylint.extensions.check_elif,
     pylint.extensions.docstyle,
     pylint.extensions.emptystring,
     pylint.extensions.overlapping_exceptions,
     pylint.extensions.redefined_variable_type,

 # Use multiple processes to speed up Pylint.  A value of 0 autodetects available
 # processors.
 jobs=0

 # Allow loading of arbitrary C extensions. Extensions are imported into the
 # active Python interpreter and may run arbitrary code.
 unsafe-load-any-extension=no

 # A comma-separated list of package or module names from where C extensions may
 # be loaded. Extensions are loading into the active Python interpreter and may
 # run arbitrary code
 extension-pkg-whitelist=

 # Allow optimization of some AST trees. This will activate a peephole AST
 # optimizer, which will apply various small optimizations. For instance, it can
 # be used to obtain the result of joining multiple strings with the addition
 # operator. Joining a lot of strings can lead to a maximum recursion error in
 # Pylint and this flag can prevent that. It has one side effect, the resulting
 # AST will be different than the one from reality.
 optimize-ast=no


 [MESSAGES CONTROL]

 # Only show warnings with the listed confidence levels. Leave empty to show
 # all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
 confidence=

 # Enable the message, report, category or checker with the given id(s). You can
 # either give multiple identifier separated by comma (,) or put this option
 # multiple time. See also the "--disable" option for examples.
 enable=
     apply-builtin,
     backtick,
     bad-python3-import,
     basestring-builtin,
     buffer-builtin,
     cmp-builtin,
     cmp-method,
     coerce-builtin,
     coerce-method,
     delslice-method,
     deprecated-itertools-function,
     deprecated-str-translate-call,
     deprecated-string-function,
     deprecated-types-field,
     dict-items-not-iterating,
     dict-iter-method,
     dict-keys-not-iterating,
     dict-values-not-iterating,
     dict-view-method,
     div-method,
     exception-message-attribute,
     execfile-builtin,
     file-builtin,
     filter-builtin-not-iterating,
     getslice-method,
     hex-method,
     idiv-method,
     import-star-module-level,
     indexing-exception,
     input-builtin,
     intern-builtin,
     invalid-str-codec,
     long-builtin,
     long-suffix,
     map-builtin-not-iterating,
     metaclass-assignment,
     next-method-called,
     next-method-defined,
     nonzero-method,
     oct-method,
     old-division,
     old-ne-operator,
     old-octal-literal,
     old-raise-syntax,
     parameter-unpacking,
     print-statement,
     raising-string,
     range-builtin-not-iterating,
     raw_input-builtin,
     rdiv-method,
     reduce-builtin,
     reload-builtin,
     round-builtin,
     setslice-method,
     standarderror-builtin,
     sys-max-int,
     unichr-builtin,
     unicode-builtin,
     unpacking-in-except,
     using-cmp-argument,
     xrange-builtin,
     zip-builtin-not-iterating,


 # Disable the message, report, category or checker with the given id(s). You
 # can either give multiple identifiers separated by comma (,) or put this
 # option multiple times (only on the command line, not in the configuration
 # file where it should appear only once).You can also use "--disable=all" to
 # disable everything first and then reenable specific checks. For example, if
 # you want to run only the similarities checker, you can use "--disable=all
 # --enable=similarities". If you want to run only the classes checker, but have
 # no Warning level messages displayed, use"--disable=all --enable=classes
 # --disable=W"
 # We leave many of the style warnings to judgement/peer review.
 # useless-object-inheritance: We disable this for Python 2 compatibility.
 disable=
     fixme,
     file-ignored,
     invalid-name,
     locally-disabled,
     locally-enabled,
     missing-docstring,
     no-self-use,
     star-args,
     too-few-public-methods,
     too-many-arguments,
     too-many-branches,
     too-many-instance-attributes,
     too-many-lines,
     too-many-locals,
     too-many-public-methods,
     too-many-return-statements,
     too-many-statements,
     useless-object-inheritance,


 [REPORTS]

 # Set the output format. Available formats are text, parseable, colorized, msvs
 # (visual studio) and html. You can also give a reporter class, eg
 # mypackage.mymodule.MyReporterClass.
 output-format=text

 # Put messages in a separate file for each module / package specified on the
 # command line instead of printing them on stdout. Reports (if any) will be
 # written in a file name "pylint_global.[txt|html]".
 files-output=no

 # Tells whether to display a full report or only the messages
 reports=no

 # Activate the evaluation score.
 score=no

 # Python expression which should return a note less than 10 (10 is the highest
 # note). You have access to the variables errors warning, statement which
 # respectively contain the number of errors / warnings messages and the total
 # number of statements analyzed. This is used by the global evaluation report
 # (RP0004).
 #evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

 # Template used to display messages. This is a python new-style format string
 # used to format the message information. See doc for all details
 #msg-template=


 [SIMILARITIES]

 # Minimum lines number of a similarity.
 min-similarity-lines=20

 # Ignore comments when computing similarities.
 ignore-comments=yes

 # Ignore docstrings when computing similarities.
 ignore-docstrings=yes

 # Ignore imports when computing similarities.
 ignore-imports=no


 [TYPECHECK]

 # Tells whether missing members accessed in mixin class should be ignored. A
 # mixin class is detected if its name ends with "mixin" (case insensitive).
 ignore-mixin-members=yes

 # List of module names for which member attributes should not be checked
 # (useful for modules/projects where namespaces are manipulated during runtime
 # and thus existing member attributes cannot be deduced by static analysis. It
 # supports qualified module names, as well as Unix pattern matching.
 ignored-modules=

 # List of classes names for which member attributes should not be checked
 # (useful for classes with attributes dynamically set). This supports can work
 # with qualified names.
 ignored-classes=hashlib,numpy

 # List of members which are set dynamically and missed by pylint inference
 # system, and so shouldn't trigger E1101 when accessed. Python regular
 # expressions are accepted.
 generated-members=


 [SPELLING]

 # Spelling dictionary name. Available dictionaries: none. To make it working
 # install python-enchant package.
 spelling-dict=

 # List of comma separated words that should not be checked.
 spelling-ignore-words=

 # A path to a file that contains private dictionary; one word per line.
 spelling-private-dict-file=

 # Tells whether to store unknown words to indicated private dictionary in
 # --spelling-private-dict-file option instead of raising a message.
 spelling-store-unknown-words=no


 [LOGGING]

 # Logging modules to check that the string format arguments are in logging
 # function parameter format
 logging-modules=logging


 [VARIABLES]

 # Tells whether we should check for unused import in __init__ files.
 init-import=no

 # A regular expression matching the name of dummy variables (i.e. expectedly
 # not used).
 dummy-variables-rgx=_|unused_

 # List of additional names supposed to be defined in builtins. Remember that
 # you should avoid to define new builtins when possible.
 additional-builtins=

 # List of strings which can identify a callback function by name. A callback
 # name must start or end with one of those strings.
 callbacks=cb_,_cb


 [FORMAT]

 # Maximum number of characters on a single line.
 max-line-length=80

 # Regexp for a line that is allowed to be longer than the limit.
 ignore-long-lines=^\s*(# )?<?https?://\S+>?$

 # Allow the body of an if to be on the same line as the test if there is no
 # else.
 single-line-if-stmt=no

 # List of optional constructs for which whitespace checking is disabled. `dict-
 # separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.
 # `trailing-comma` allows a space between comma and closing bracket: (a, ).
 # `empty-line` allows space-only lines.
 no-space-check=trailing-comma,dict-separator

 # Maximum number of lines in a module
 max-module-lines=1000

 # String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
 # tab).
 indent-string='  '

 # Number of spaces of indent required inside a hanging  or continued line.
 indent-after-paren=4

 # Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
 expected-line-ending-format=LF


 [MISCELLANEOUS]

 # List of note tags to take in consideration, separated by a comma.
 notes=FIXME,XXX,TODO


 [BASIC]

 # List of builtins function names that should not be used, separated by a comma
 bad-functions=map,filter,input

 # Good variable names which should always be accepted, separated by a comma
 good-names=i,j,k,ex,x,_

 # Bad variable names which should always be refused, separated by a comma
 bad-names=foo,bar,baz,toto,tutu,tata

 # Colon-delimited sets of names that determine each other's naming style when
 # the name regexes allow several styles.
 name-group=

 # Include a hint for the correct naming format with invalid-name
 include-naming-hint=no

 # Regular expression matching correct function names
 function-rgx=[a-z_][a-z0-9_]{2,30}$

 # Naming hint for function names
 function-name-hint=[a-z_][a-z0-9_]{2,30}$

 # Regular expression matching correct variable names
 variable-rgx=[a-z_][a-z0-9_]{2,30}$

 # Naming hint for variable names
 variable-name-hint=[a-z_][a-z0-9_]{2,30}$

 # Regular expression matching correct constant names
 const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

 # Naming hint for constant names
 const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$

 # Regular expression matching correct attribute names
 attr-rgx=[a-z_][a-z0-9_]{2,30}$

 # Naming hint for attribute names
 attr-name-hint=[a-z_][a-z0-9_]{2,30}$

 # Regular expression matching correct argument names
 argument-rgx=[a-z_][a-z0-9_]{2,30}$

 # Naming hint for argument names
 argument-name-hint=[a-z_][a-z0-9_]{2,30}$

 # Regular expression matching correct class attribute names
 class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$

 # Naming hint for class attribute names
 class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$

 # Regular expression matching correct inline iteration names
 inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

 # Naming hint for inline iteration names
 inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$

 # Regular expression matching correct class names
 class-rgx=[A-Z_][a-zA-Z0-9]+$

 # Naming hint for class names
 class-name-hint=[A-Z_][a-zA-Z0-9]+$

 # Regular expression matching correct module names
 module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

 # Naming hint for module names
 module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

 # Regular expression which should only match correct method names
 method-rgx=[a-z_][a-z0-9_]{2,30}$

 # Naming hint for method names
 method-name-hint=[a-z_][a-z0-9_]{2,30}$

 # Regular expression which should only match function or class names that do
 # not require a docstring.
 no-docstring-rgx=^_

 # Minimum line length for functions/classes that require docstrings, shorter
 # ones are exempt.
 docstring-min-length=10


 [ELIF]

 # Maximum number of nested blocks for function / method body
 max-nested-blocks=5


 [DESIGN]

 # Maximum number of arguments for function / method
 max-args=5

 # Argument names that match this expression will be ignored. Default to name
 # with leading underscore
 ignored-argument-names=_.*

 # Maximum number of locals for function / method body
 max-locals=15

 # Maximum number of return / yield for function / method body
 max-returns=6

 # Maximum number of branch for function / method body
 max-branches=12

 # Maximum number of statements in function / method body
 max-statements=50

 # Maximum number of parents for a class (see R0901).
 max-parents=10

 # Maximum number of attributes for a class (see R0902).
 max-attributes=7

 # Minimum number of public methods for a class (see R0903).
 min-public-methods=2

 # Maximum number of public methods for a class (see R0904).
 max-public-methods=20

 # Maximum number of boolean expressions in a if statement
 max-bool-expr=5


 [CLASSES]

 # List of method names used to declare (i.e. assign) instance attributes.
 defining-attr-methods=__init__,__new__,setUp

 # List of valid names for the first argument in a class method.
 valid-classmethod-first-arg=cls

 # List of valid names for the first argument in a metaclass class method.
 valid-metaclass-classmethod-first-arg=mcs

 # List of member names, which should be excluded from the protected access
 # warning.
 exclude-protected=_asdict,_fields,_replace,_source,_make


 [IMPORTS]

 # Deprecated modules which should not be used, separated by a comma
 deprecated-modules=regsub,TERMIOS,Bastion,rexec,optparse

 # Create a graph of every (i.e. internal and external) dependencies in the
 # given file (report RP0402 must not be disabled)
 import-graph=

 # Create a graph of external dependencies in the given file (report RP0402 must
 # not be disabled)
 ext-import-graph=

 # Create a graph of internal dependencies in the given file (report RP0402 must
 # not be disabled)
 int-import-graph=


 [EXCEPTIONS]

 # Exceptions that will emit a warning when being caught. Defaults to
 # "Exception"
 overgeneral-exceptions=Exception
	# Copyright 2016 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	[MASTER]

	# Specify a configuration file.
	#rcfile=

	# Python code to execute, usually for sys.path manipulation such as
	# pygtk.require().
	#init-hook=

	# Profiled execution.
	profile=no

	# Add files or directories to the blacklist. They should be base names, not
	# paths.
	ignore=CVS,.svn,.git
	ignore-patterns=.pb2\.py,.pb2_grpc\.py

	# Pickle collected data for later comparisons.
	persistent=yes

	# List of plugins (as comma separated values of python modules names) to load,
	# usually to register additional checkers.
	load-plugins=
	pylint.extensions.bad_builtin,
	pylint.extensions.check_elif,
	pylint.extensions.docstyle,
	pylint.extensions.emptystring,
	pylint.extensions.overlapping_exceptions,
	pylint.extensions.redefined_variable_type,

	# Use multiple processes to speed up Pylint. A value of 0 autodetects available
	# processors.
	jobs=0

	# Allow loading of arbitrary C extensions. Extensions are imported into the
	# active Python interpreter and may run arbitrary code.
	unsafe-load-any-extension=no

	# A comma-separated list of package or module names from where C extensions may
	# be loaded. Extensions are loading into the active Python interpreter and may
	# run arbitrary code
	extension-pkg-whitelist=

	# Allow optimization of some AST trees. This will activate a peephole AST
	# optimizer, which will apply various small optimizations. For instance, it can
	# be used to obtain the result of joining multiple strings with the addition
	# operator. Joining a lot of strings can lead to a maximum recursion error in
	# Pylint and this flag can prevent that. It has one side effect, the resulting
	# AST will be different than the one from reality.
	optimize-ast=no


	[MESSAGES CONTROL]

	# Only show warnings with the listed confidence levels. Leave empty to show
	# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
	confidence=

	# Enable the message, report, category or checker with the given id(s). You can
	# either give multiple identifier separated by comma (,) or put this option
	# multiple time. See also the "--disable" option for examples.
	enable=
	apply-builtin,
	backtick,
	bad-python3-import,
	basestring-builtin,
	buffer-builtin,
	cmp-builtin,
	cmp-method,
	coerce-builtin,
	coerce-method,
	delslice-method,
	deprecated-itertools-function,
	deprecated-str-translate-call,
	deprecated-string-function,
	deprecated-types-field,
	dict-items-not-iterating,
	dict-iter-method,
	dict-keys-not-iterating,
	dict-values-not-iterating,
	dict-view-method,
	div-method,
	exception-message-attribute,
	execfile-builtin,
	file-builtin,
	filter-builtin-not-iterating,
	getslice-method,
	hex-method,
	idiv-method,
	import-star-module-level,
	indexing-exception,
	input-builtin,
	intern-builtin,
	invalid-str-codec,
	long-builtin,
	long-suffix,
	map-builtin-not-iterating,
	metaclass-assignment,
	next-method-called,
	next-method-defined,
	nonzero-method,
	oct-method,
	old-division,
	old-ne-operator,
	old-octal-literal,
	old-raise-syntax,
	parameter-unpacking,
	print-statement,
	raising-string,
	range-builtin-not-iterating,
	raw_input-builtin,
	rdiv-method,
	reduce-builtin,
	reload-builtin,
	round-builtin,
	setslice-method,
	standarderror-builtin,
	sys-max-int,
	unichr-builtin,
	unicode-builtin,
	unpacking-in-except,
	using-cmp-argument,
	xrange-builtin,
	zip-builtin-not-iterating,


	# Disable the message, report, category or checker with the given id(s). You
	# can either give multiple identifiers separated by comma (,) or put this
	# option multiple times (only on the command line, not in the configuration
	# file where it should appear only once).You can also use "--disable=all" to
	# disable everything first and then reenable specific checks. For example, if
	# you want to run only the similarities checker, you can use "--disable=all
	# --enable=similarities". If you want to run only the classes checker, but have
	# no Warning level messages displayed, use"--disable=all --enable=classes
	# --disable=W"
	# We leave many of the style warnings to judgement/peer review.
	# useless-object-inheritance: We disable this for Python 2 compatibility.
	disable=
	fixme,
	file-ignored,
	invalid-name,
	locally-disabled,
	locally-enabled,
	missing-docstring,
	no-self-use,
	star-args,
	too-few-public-methods,
	too-many-arguments,
	too-many-branches,
	too-many-instance-attributes,
	too-many-lines,
	too-many-locals,
	too-many-public-methods,
	too-many-return-statements,
	too-many-statements,
	useless-object-inheritance,


	[REPORTS]

	# Set the output format. Available formats are text, parseable, colorized, msvs
	# (visual studio) and html. You can also give a reporter class, eg
	# mypackage.mymodule.MyReporterClass.
	output-format=text

	# Put messages in a separate file for each module / package specified on the
	# command line instead of printing them on stdout. Reports (if any) will be
	# written in a file name "pylint_global.[txt\|html]".
	files-output=no

	# Tells whether to display a full report or only the messages
	reports=no

	# Activate the evaluation score.
	score=no

	# Python expression which should return a note less than 10 (10 is the highest
	# note). You have access to the variables errors warning, statement which
	# respectively contain the number of errors / warnings messages and the total
	# number of statements analyzed. This is used by the global evaluation report
	# (RP0004).
	#evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

	# Template used to display messages. This is a python new-style format string
	# used to format the message information. See doc for all details
	#msg-template=


	[SIMILARITIES]

	# Minimum lines number of a similarity.
	min-similarity-lines=20

	# Ignore comments when computing similarities.
	ignore-comments=yes

	# Ignore docstrings when computing similarities.
	ignore-docstrings=yes

	# Ignore imports when computing similarities.
	ignore-imports=no


	[TYPECHECK]

	# Tells whether missing members accessed in mixin class should be ignored. A
	# mixin class is detected if its name ends with "mixin" (case insensitive).
	ignore-mixin-members=yes

	# List of module names for which member attributes should not be checked
	# (useful for modules/projects where namespaces are manipulated during runtime
	# and thus existing member attributes cannot be deduced by static analysis. It
	# supports qualified module names, as well as Unix pattern matching.
	ignored-modules=

	# List of classes names for which member attributes should not be checked
	# (useful for classes with attributes dynamically set). This supports can work
	# with qualified names.
	ignored-classes=hashlib,numpy

	# List of members which are set dynamically and missed by pylint inference
	# system, and so shouldn't trigger E1101 when accessed. Python regular
	# expressions are accepted.
	generated-members=


	[SPELLING]

	# Spelling dictionary name. Available dictionaries: none. To make it working
	# install python-enchant package.
	spelling-dict=

	# List of comma separated words that should not be checked.
	spelling-ignore-words=

	# A path to a file that contains private dictionary; one word per line.
	spelling-private-dict-file=

	# Tells whether to store unknown words to indicated private dictionary in
	# --spelling-private-dict-file option instead of raising a message.
	spelling-store-unknown-words=no


	[LOGGING]

	# Logging modules to check that the string format arguments are in logging
	# function parameter format
	logging-modules=logging


	[VARIABLES]

	# Tells whether we should check for unused import in __init__ files.
	init-import=no

	# A regular expression matching the name of dummy variables (i.e. expectedly
	# not used).
	dummy-variables-rgx=_\|unused_

	# List of additional names supposed to be defined in builtins. Remember that
	# you should avoid to define new builtins when possible.
	additional-builtins=

	# List of strings which can identify a callback function by name. A callback
	# name must start or end with one of those strings.
	callbacks=cb_,_cb


	[FORMAT]

	# Maximum number of characters on a single line.
	max-line-length=80

	# Regexp for a line that is allowed to be longer than the limit.
	ignore-long-lines=^\s*(# )?<?https?://\S+>?$

	# Allow the body of an if to be on the same line as the test if there is no
	# else.
	single-line-if-stmt=no

	# List of optional constructs for which whitespace checking is disabled. `dict-
	# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}.
	# `trailing-comma` allows a space between comma and closing bracket: (a, ).
	# `empty-line` allows space-only lines.
	no-space-check=trailing-comma,dict-separator

	# Maximum number of lines in a module
	max-module-lines=1000

	# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
	# tab).
	indent-string=' '

	# Number of spaces of indent required inside a hanging or continued line.
	indent-after-paren=4

	# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
	expected-line-ending-format=LF


	[MISCELLANEOUS]

	# List of note tags to take in consideration, separated by a comma.
	notes=FIXME,XXX,TODO


	[BASIC]

	# List of builtins function names that should not be used, separated by a comma
	bad-functions=map,filter,input

	# Good variable names which should always be accepted, separated by a comma
	good-names=i,j,k,ex,x,_

	# Bad variable names which should always be refused, separated by a comma
	bad-names=foo,bar,baz,toto,tutu,tata

	# Colon-delimited sets of names that determine each other's naming style when
	# the name regexes allow several styles.
	name-group=

	# Include a hint for the correct naming format with invalid-name
	include-naming-hint=no

	# Regular expression matching correct function names
	function-rgx=[a-z_][a-z0-9_]{2,30}$

	# Naming hint for function names
	function-name-hint=[a-z_][a-z0-9_]{2,30}$

	# Regular expression matching correct variable names
	variable-rgx=[a-z_][a-z0-9_]{2,30}$

	# Naming hint for variable names
	variable-name-hint=[a-z_][a-z0-9_]{2,30}$

	# Regular expression matching correct constant names
	const-rgx=(([A-Z_][A-Z0-9_])\|(__.__))$

	# Naming hint for constant names
	const-name-hint=(([A-Z_][A-Z0-9_])\|(__.__))$

	# Regular expression matching correct attribute names
	attr-rgx=[a-z_][a-z0-9_]{2,30}$

	# Naming hint for attribute names
	attr-name-hint=[a-z_][a-z0-9_]{2,30}$

	# Regular expression matching correct argument names
	argument-rgx=[a-z_][a-z0-9_]{2,30}$

	# Naming hint for argument names
	argument-name-hint=[a-z_][a-z0-9_]{2,30}$

	# Regular expression matching correct class attribute names
	class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}\|(__.*__))$

	# Naming hint for class attribute names
	class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}\|(__.*__))$

	# Regular expression matching correct inline iteration names
	inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

	# Naming hint for inline iteration names
	inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$

	# Regular expression matching correct class names
	class-rgx=[A-Z_][a-zA-Z0-9]+$

	# Naming hint for class names
	class-name-hint=[A-Z_][a-zA-Z0-9]+$

	# Regular expression matching correct module names
	module-rgx=(([a-z_][a-z0-9_]*)\|([A-Z][a-zA-Z0-9]+))$

	# Naming hint for module names
	module-name-hint=(([a-z_][a-z0-9_]*)\|([A-Z][a-zA-Z0-9]+))$

	# Regular expression which should only match correct method names
	method-rgx=[a-z_][a-z0-9_]{2,30}$

	# Naming hint for method names
	method-name-hint=[a-z_][a-z0-9_]{2,30}$

	# Regular expression which should only match function or class names that do
	# not require a docstring.
	no-docstring-rgx=^_

	# Minimum line length for functions/classes that require docstrings, shorter
	# ones are exempt.
	docstring-min-length=10


	[ELIF]

	# Maximum number of nested blocks for function / method body
	max-nested-blocks=5


	[DESIGN]

	# Maximum number of arguments for function / method
	max-args=5

	# Argument names that match this expression will be ignored. Default to name
	# with leading underscore
	ignored-argument-names=_.*

	# Maximum number of locals for function / method body
	max-locals=15

	# Maximum number of return / yield for function / method body
	max-returns=6

	# Maximum number of branch for function / method body
	max-branches=12

	# Maximum number of statements in function / method body
	max-statements=50

	# Maximum number of parents for a class (see R0901).
	max-parents=10

	# Maximum number of attributes for a class (see R0902).
	max-attributes=7

	# Minimum number of public methods for a class (see R0903).
	min-public-methods=2

	# Maximum number of public methods for a class (see R0904).
	max-public-methods=20

	# Maximum number of boolean expressions in a if statement
	max-bool-expr=5


	[CLASSES]

	# List of method names used to declare (i.e. assign) instance attributes.
	defining-attr-methods=__init__,__new__,setUp

	# List of valid names for the first argument in a class method.
	valid-classmethod-first-arg=cls

	# List of valid names for the first argument in a metaclass class method.
	valid-metaclass-classmethod-first-arg=mcs

	# List of member names, which should be excluded from the protected access
	# warning.
	exclude-protected=_asdict,_fields,_replace,_source,_make


	[IMPORTS]

	# Deprecated modules which should not be used, separated by a comma
	deprecated-modules=regsub,TERMIOS,Bastion,rexec,optparse

	# Create a graph of every (i.e. internal and external) dependencies in the
	# given file (report RP0402 must not be disabled)
	import-graph=

	# Create a graph of external dependencies in the given file (report RP0402 must
	# not be disabled)
	ext-import-graph=

	# Create a graph of internal dependencies in the given file (report RP0402 must
	# not be disabled)
	int-import-graph=


	[EXCEPTIONS]

	# Exceptions that will emit a warning when being caught. Defaults to
	# "Exception"
	overgeneral-exceptions=Exception