/* -----------------------------------------------------------------------------
Software License for The Fraunhofer FDK AAC Codec Library for Android

© Copyright  1995 - 2018 Fraunhofer-Gesellschaft zur Förderung der angewandten
Forschung e.V. All rights reserved.

 1.    INTRODUCTION
The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software
that implements the MPEG Advanced Audio Coding ("AAC") encoding and decoding
scheme for digital audio. This FDK AAC Codec software is intended to be used on
a wide variety of Android devices.

AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient
general perceptual audio codecs. AAC-ELD is considered the best-performing
full-bandwidth communications codec by independent studies and is widely
deployed. AAC has been standardized by ISO and IEC as part of the MPEG
specifications.

Patent licenses for necessary patent claims for the FDK AAC Codec (including
those of Fraunhofer) may be obtained through Via Licensing
(www.vialicensing.com) or through the respective patent owners individually for
the purpose of encoding or decoding bit streams in products that are compliant
with the ISO/IEC MPEG audio standards. Please note that most manufacturers of
Android devices already license these patent claims through Via Licensing or
directly from the patent owners, and therefore FDK AAC Codec software may
already be covered under those patent licenses when it is used for those
licensed purposes only.

Commercially-licensed AAC software libraries, including floating-point versions
with enhanced sound quality, are also available from Fraunhofer. Users are
encouraged to check the Fraunhofer website for additional applications
information and documentation.

2.    COPYRIGHT LICENSE

Redistribution and use in source and binary forms, with or without modification,
are permitted without payment of copyright license fees provided that you
satisfy the following conditions:

You must retain the complete text of this software license in redistributions of
the FDK AAC Codec or your modifications thereto in source code form.

You must retain the complete text of this software license in the documentation
and/or other materials provided with redistributions of the FDK AAC Codec or
your modifications thereto in binary form. You must make available free of
charge copies of the complete source code of the FDK AAC Codec and your
modifications thereto to recipients of copies in binary form.

The name of Fraunhofer may not be used to endorse or promote products derived
from this library without prior written permission.

You may not charge copyright license fees for anyone to use, copy or distribute
the FDK AAC Codec software or your modifications thereto.

Your modified versions of the FDK AAC Codec must carry prominent notices stating
that you changed the software and the date of any change. For modified versions
of the FDK AAC Codec, the term "Fraunhofer FDK AAC Codec Library for Android"
must be replaced by the term "Third-Party Modified Version of the Fraunhofer FDK
AAC Codec Library for Android."

3.    NO PATENT LICENSE

NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without
limitation the patents of Fraunhofer, ARE GRANTED BY THIS SOFTWARE LICENSE.
Fraunhofer provides no warranty of patent non-infringement with respect to this
software.

You may use this FDK AAC Codec software or modifications thereto only for
purposes that are authorized by appropriate patent licenses.

4.    DISCLAIMER

This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright
holders and contributors "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES,
including but not limited to the implied warranties of merchantability and
fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary,
or consequential damages, including but not limited to procurement of substitute
goods or services; loss of use, data, or profits, or business interruption,
however caused and on any theory of liability, whether in contract, strict
liability, or tort (including negligence), arising in any way out of the use of
this software, even if advised of the possibility of such damage.

5.    CONTACT INFORMATION

Fraunhofer Institute for Integrated Circuits IIS
Attention: Audio and Multimedia Departments - FDK AAC LL
Am Wolfsmantel 33
91058 Erlangen, Germany

www.iis.fraunhofer.de/amm
amm-info@iis.fraunhofer.de
----------------------------------------------------------------------------- */

/******************* Library for basic calculation routines ********************

   Author(s):   M. Gayer

   Description: Fixed point specific mathematical functions

*******************************************************************************/

#ifndef FIXPOINT_MATH_H
#define FIXPOINT_MATH_H

#include "common_fix.h"
#include "scale.h"

/*
 * Data definitions
 */

#define LD_DATA_SCALING (64.0f)
#define LD_DATA_SHIFT 6 /* pow(2, LD_DATA_SHIFT) = LD_DATA_SCALING */

#define MAX_LD_PRECISION 10
#define LD_PRECISION 10

/* Taylor series coefficients for ln(1-x), centered at 0 (MacLaurin polynomial).
 */
#ifndef LDCOEFF_16BIT
LNK_SECTION_CONSTDATA_L1
static const FIXP_DBL ldCoeff[MAX_LD_PRECISION] = {
    FL2FXCONST_DBL(-1.0),       FL2FXCONST_DBL(-1.0 / 2.0),
    FL2FXCONST_DBL(-1.0 / 3.0), FL2FXCONST_DBL(-1.0 / 4.0),
    FL2FXCONST_DBL(-1.0 / 5.0), FL2FXCONST_DBL(-1.0 / 6.0),
    FL2FXCONST_DBL(-1.0 / 7.0), FL2FXCONST_DBL(-1.0 / 8.0),
    FL2FXCONST_DBL(-1.0 / 9.0), FL2FXCONST_DBL(-1.0 / 10.0)};
#else  /* LDCOEFF_16BIT */
LNK_SECTION_CONSTDATA_L1
static const FIXP_SGL ldCoeff[MAX_LD_PRECISION] = {
    FL2FXCONST_SGL(-1.0),       FL2FXCONST_SGL(-1.0 / 2.0),
    FL2FXCONST_SGL(-1.0 / 3.0), FL2FXCONST_SGL(-1.0 / 4.0),
    FL2FXCONST_SGL(-1.0 / 5.0), FL2FXCONST_SGL(-1.0 / 6.0),
    FL2FXCONST_SGL(-1.0 / 7.0), FL2FXCONST_SGL(-1.0 / 8.0),
    FL2FXCONST_SGL(-1.0 / 9.0), FL2FXCONST_SGL(-1.0 / 10.0)};
#endif /* LDCOEFF_16BIT */

/*****************************************************************************

    functionname: invSqrtNorm2
    description:  delivers 1/sqrt(op) normalized to .5...1 and the shift value
of the OUTPUT

*****************************************************************************/
#define SQRT_BITS 7
#define SQRT_VALUES (128 + 2)
#define SQRT_BITS_MASK 0x7f
#define SQRT_FRACT_BITS_MASK 0x007FFFFF

extern const FIXP_DBL invSqrtTab[SQRT_VALUES];

/*
 * Hardware specific implementations
 */

#if defined(__x86__)
#include "x86/fixpoint_math_x86.h"
#endif /* target architecture selector */

/*
 * Fallback implementations
 */
#if !defined(FUNCTION_fIsLessThan)
/**
 * \brief Compares two fixpoint values incl. scaling.
 * \param a_m mantissa of the first input value.
 * \param a_e exponent of the first input value.
 * \param b_m mantissa of the second input value.
 * \param b_e exponent of the second input value.
 * \return non-zero if (a_m*2^a_e) < (b_m*2^b_e), 0 otherwise
 */
FDK_INLINE INT fIsLessThan(FIXP_DBL a_m, INT a_e, FIXP_DBL b_m, INT b_e) {
  if (a_e > b_e) {
    return ((b_m >> fMin(a_e - b_e, DFRACT_BITS - 1)) > a_m);
  } else {
    return ((a_m >> fMin(b_e - a_e, DFRACT_BITS - 1)) < b_m);
  }
}

FDK_INLINE INT fIsLessThan(FIXP_SGL a_m, INT a_e, FIXP_SGL b_m, INT b_e) {
  if (a_e > b_e) {
    return ((b_m >> fMin(a_e - b_e, FRACT_BITS - 1)) > a_m);
  } else {
    return ((a_m >> fMin(b_e - a_e, FRACT_BITS - 1)) < b_m);
  }
}
#endif

/**
 * \brief deprecated. Use fLog2() instead.
 */
#define CalcLdData(op) fLog2(op, 0)

void LdDataVector(FIXP_DBL *srcVector, FIXP_DBL *destVector, INT number);

extern const UINT exp2_tab_long[32];
extern const UINT exp2w_tab_long[32];
extern const UINT exp2x_tab_long[32];

LNK_SECTION_CODE_L1
FDK_INLINE FIXP_DBL CalcInvLdData(const FIXP_DBL x) {
  int set_zero = (x < FL2FXCONST_DBL(-31.0 / 64.0)) ? 0 : 1;
  int set_max = (x >= FL2FXCONST_DBL(31.0 / 64.0)) | (x == FL2FXCONST_DBL(0.0));

  FIXP_SGL frac = (FIXP_SGL)((LONG)x & 0x3FF);
  UINT index3 = (UINT)(LONG)(x >> 10) & 0x1F;
  UINT index2 = (UINT)(LONG)(x >> 15) & 0x1F;
  UINT index1 = (UINT)(LONG)(x >> 20) & 0x1F;
  int exp = fMin(31, ((x > FL2FXCONST_DBL(0.0f)) ? (31 - (int)(x >> 25))
                                                 : (int)(-(x >> 25))));

  UINT lookup1 = exp2_tab_long[index1] * set_zero;
  UINT lookup2 = exp2w_tab_long[index2];
  UINT lookup3 = exp2x_tab_long[index3];
  UINT lookup3f =
      lookup3 + (UINT)(LONG)fMultDiv2((FIXP_DBL)(0x0016302F), (FIXP_SGL)frac);

  UINT lookup12 = (UINT)(LONG)fMult((FIXP_DBL)lookup1, (FIXP_DBL)lookup2);
  UINT lookup = (UINT)(LONG)fMult((FIXP_DBL)lookup12, (FIXP_DBL)lookup3f);

  FIXP_DBL retVal = (lookup << 3) >> exp;

  if (set_max) {
    retVal = (FIXP_DBL)MAXVAL_DBL;
  }

  return retVal;
}

void InitLdInt();
FIXP_DBL CalcLdInt(INT i);

extern const USHORT sqrt_tab[49];

inline FIXP_DBL sqrtFixp_lookup(FIXP_DBL x) {
  UINT y = (INT)x;
  UCHAR is_zero = (y == 0);
  INT zeros = fixnormz_D(y) & 0x1e;
  y <<= zeros;
  UINT idx = (y >> 26) - 16;
  USHORT frac = (y >> 10) & 0xffff;
  USHORT nfrac = 0xffff ^ frac;
  UINT t = (UINT)nfrac * sqrt_tab[idx] + (UINT)frac * sqrt_tab[idx + 1];
  t = t >> (zeros >> 1);
  return (is_zero ? 0 : t);
}

inline FIXP_DBL sqrtFixp_lookup(FIXP_DBL x, INT *x_e) {
  UINT y = (INT)x;
  INT e;

  if (x == (FIXP_DBL)0) {
    return x;
  }

  /* Normalize */
  e = fixnormz_D(y);
  y <<= e;
  e = *x_e - e + 2;

  /* Correct odd exponent. */
  if (e & 1) {
    y >>= 1;
    e++;
  }
  /* Get square root */
  UINT idx = (y >> 26) - 16;
  USHORT frac = (y >> 10) & 0xffff;
  USHORT nfrac = 0xffff ^ frac;
  UINT t = (UINT)nfrac * sqrt_tab[idx] + (UINT)frac * sqrt_tab[idx + 1];

  /* Write back exponent */
  *x_e = e >> 1;
  return (FIXP_DBL)(LONG)(t >> 1);
}

void InitInvSqrtTab();

#ifndef FUNCTION_invSqrtNorm2
/**
 * \brief calculate 1.0/sqrt(op)
 * \param op_m mantissa of input value.
 * \param result_e pointer to return the exponent of the result
 * \return mantissa of the result
 */
/*****************************************************************************
  delivers 1/sqrt(op) normalized to .5...1 and the shift value of the OUTPUT,
  i.e. the denormalized result is 1/sqrt(op) = invSqrtNorm(op) * 2^(shift)
  uses Newton-iteration for approximation
      Q(n+1) = Q(n) + Q(n) * (0.5 - 2 * V * Q(n)^2)
      with Q = 0.5* V ^-0.5; 0.5 <= V < 1.0
*****************************************************************************/
static FDK_FORCEINLINE FIXP_DBL invSqrtNorm2(FIXP_DBL op, INT *shift) {
  FIXP_DBL val = op;
  FIXP_DBL reg1, reg2;

  if (val == FL2FXCONST_DBL(0.0)) {
    *shift = 16;
    return ((LONG)MAXVAL_DBL); /* maximum positive value */
  }

#define INVSQRTNORM2_LINEAR_INTERPOLATE
#define INVSQRTNORM2_LINEAR_INTERPOLATE_HQ

  /* normalize input, calculate shift value */
  FDK_ASSERT(val > FL2FXCONST_DBL(0.0));
  *shift = fNormz(val) - 1; /* CountLeadingBits() is not necessary here since
                               test value is always > 0 */
  val <<= *shift;           /* normalized input V */
  *shift += 2;              /* bias for exponent */

#if defined(INVSQRTNORM2_LINEAR_INTERPOLATE)
  INT index =
      (INT)(val >> (DFRACT_BITS - 1 - (SQRT_BITS + 1))) & SQRT_BITS_MASK;
  FIXP_DBL Fract =
      (FIXP_DBL)(((INT)val & SQRT_FRACT_BITS_MASK) << (SQRT_BITS + 1));
  FIXP_DBL diff = invSqrtTab[index + 1] - invSqrtTab[index];
  reg1 = invSqrtTab[index] + (fMultDiv2(diff, Fract) << 1);
#if defined(INVSQRTNORM2_LINEAR_INTERPOLATE_HQ)
  /* reg1 = t[i] + (t[i+1]-t[i])*fract ... already computed ...
                                       + (1-fract)fract*(t[i+2]-t[i+1])/2 */
  if (Fract != (FIXP_DBL)0) {
    /* fract = fract * (1 - fract) */
    Fract = fMultDiv2(Fract, (FIXP_DBL)((ULONG)0x80000000 - (ULONG)Fract)) << 1;
    diff = diff - (invSqrtTab[index + 2] - invSqrtTab[index + 1]);
    reg1 = fMultAddDiv2(reg1, Fract, diff);
  }
#endif /* INVSQRTNORM2_LINEAR_INTERPOLATE_HQ */
#else
#error \
    "Either define INVSQRTNORM2_NEWTON_ITERATE or INVSQRTNORM2_LINEAR_INTERPOLATE"
#endif
  /* calculate the output exponent = input exp/2 */
  if (*shift & 0x00000001) { /* odd shift values ? */
    /* Note: Do not use rounded value 0x5A82799A to avoid overflow with
     * shift-by-2 */
    reg2 = (FIXP_DBL)0x5A827999;
    /* FL2FXCONST_DBL(0.707106781186547524400844362104849f);*/ /* 1/sqrt(2);
                                                                */
    reg1 = fMultDiv2(reg1, reg2) << 2;
  }

  *shift = *shift >> 1;

  return (reg1);
}
#endif /* FUNCTION_invSqrtNorm2 */

#ifndef FUNCTION_sqrtFixp
static FDK_FORCEINLINE FIXP_DBL sqrtFixp(FIXP_DBL op) {
  INT tmp_exp = 0;
  FIXP_DBL tmp_inv = invSqrtNorm2(op, &tmp_exp);

  FDK_ASSERT(tmp_exp > 0);
  return ((FIXP_DBL)(fMultDiv2((op << (tmp_exp - 1)), tmp_inv) << 2));
}
#endif /* FUNCTION_sqrtFixp */

#ifndef FUNCTION_invFixp
/**
 * \brief calculate 1.0/op
 * \param op mantissa of the input value.
 * \return mantissa of the result with implicit exponent of 31
 * \exceptions are provided for op=0,1 setting max. positive value
 */
static inline FIXP_DBL invFixp(FIXP_DBL op) {
  if ((op == (FIXP_DBL)0x00000000) || (op == (FIXP_DBL)0x00000001)) {
    return ((LONG)MAXVAL_DBL);
  }
  INT tmp_exp;
  FIXP_DBL tmp_inv = invSqrtNorm2(op, &tmp_exp);
  FDK_ASSERT((31 - (2 * tmp_exp + 1)) >= 0);
  int shift = 31 - (2 * tmp_exp + 1);
  tmp_inv = fPow2Div2(tmp_inv);
  if (shift) {
    tmp_inv = ((tmp_inv >> (shift - 1)) + (FIXP_DBL)1) >> 1;
  }
  return tmp_inv;
}

/**
 * \brief calculate 1.0/(op_m * 2^op_e)
 * \param op_m mantissa of the input value.
 * \param op_e pointer into were the exponent of the input value is stored, and
 * the result will be stored into.
 * \return mantissa of the result
 */
static inline FIXP_DBL invFixp(FIXP_DBL op_m, int *op_e) {
  if ((op_m == (FIXP_DBL)0x00000000) || (op_m == (FIXP_DBL)0x00000001)) {
    *op_e = 31 - *op_e;
    return ((LONG)MAXVAL_DBL);
  }

  INT tmp_exp;
  FIXP_DBL tmp_inv = invSqrtNorm2(op_m, &tmp_exp);

  *op_e = (tmp_exp << 1) - *op_e + 1;
  return fPow2Div2(tmp_inv);
}
#endif /* FUNCTION_invFixp */

#ifndef FUNCTION_schur_div

/**
 * \brief Divide two FIXP_DBL values with given precision.
 * \param num dividend
 * \param denum divisor
 * \param count amount of significant bits of the result (starting to the MSB)
 * \return num/divisor
 */

FIXP_DBL schur_div(FIXP_DBL num, FIXP_DBL denum, INT count);

#endif /* FUNCTION_schur_div */

FIXP_DBL mul_dbl_sgl_rnd(const FIXP_DBL op1, const FIXP_SGL op2);

#ifndef FUNCTION_fMultNorm
/**
 * \brief multiply two values with normalization, thus max precision.
 * Author: Robert Weidner
 *
 * \param f1 first factor
 * \param f2 second factor
 * \param result_e pointer to an INT where the exponent of the result is stored
 * into
 * \return mantissa of the product f1*f2
 */
FIXP_DBL fMultNorm(FIXP_DBL f1, FIXP_DBL f2, INT *result_e);

/**
 * \brief Multiply 2 values using maximum precision. The exponent of the result
 * is 0.
 * \param f1_m mantissa of factor 1
 * \param f2_m mantissa of factor 2
 * \return mantissa of the result with exponent equal to 0
 */
inline FIXP_DBL fMultNorm(FIXP_DBL f1, FIXP_DBL f2) {
  FIXP_DBL m;
  INT e;

  m = fMultNorm(f1, f2, &e);

  m = scaleValueSaturate(m, e);

  return m;
}

/**
 * \brief Multiply 2 values with exponent and use given exponent for the
 * mantissa of the result.
 * \param f1_m mantissa of factor 1
 * \param f1_e exponent of factor 1
 * \param f2_m mantissa of factor 2
 * \param f2_e exponent of factor 2
 * \param result_e exponent for the returned mantissa of the result
 * \return mantissa of the result with exponent equal to result_e
 */
inline FIXP_DBL fMultNorm(FIXP_DBL f1_m, INT f1_e, FIXP_DBL f2_m, INT f2_e,
                          INT result_e) {
  FIXP_DBL m;
  INT e;

  m = fMultNorm(f1_m, f2_m, &e);

  m = scaleValueSaturate(m, e + f1_e + f2_e - result_e);

  return m;
}
#endif /* FUNCTION_fMultNorm */

#ifndef FUNCTION_fMultI
/**
 * \brief Multiplies a fractional value and a integer value and performs
 * rounding to nearest
 * \param a fractional value
 * \param b integer value
 * \return integer value
 */
inline INT fMultI(FIXP_DBL a, INT b) {
  FIXP_DBL m, mi;
  INT m_e;

  m = fMultNorm(a, (FIXP_DBL)b, &m_e);

  if (m_e < (INT)0) {
    if (m_e > (INT)-DFRACT_BITS) {
      m = m >> ((-m_e) - 1);
      mi = (m + (FIXP_DBL)1) >> 1;
    } else {
      mi = (FIXP_DBL)0;
    }
  } else {
    mi = scaleValueSaturate(m, m_e);
  }

  return ((INT)mi);
}
#endif /* FUNCTION_fMultI */

#ifndef FUNCTION_fMultIfloor
/**
 * \brief Multiplies a fractional value and a integer value and performs floor
 * rounding
 * \param a fractional value
 * \param b integer value
 * \return integer value
 */
inline INT fMultIfloor(FIXP_DBL a, INT b) {
  FIXP_DBL m, mi;
  INT m_e;

  m = fMultNorm(a, (FIXP_DBL)b, &m_e);

  if (m_e < (INT)0) {
    if (m_e > (INT)-DFRACT_BITS) {
      mi = m >> (-m_e);
    } else {
      mi = (FIXP_DBL)0;
      if (m < (FIXP_DBL)0) {
        mi = (FIXP_DBL)-1;
      }
    }
  } else {
    mi = scaleValueSaturate(m, m_e);
  }

  return ((INT)mi);
}
#endif /* FUNCTION_fMultIfloor */

#ifndef FUNCTION_fMultIceil
/**
 * \brief Multiplies a fractional value and a integer value and performs ceil
 * rounding
 * \param a fractional value
 * \param b integer value
 * \return integer value
 */
inline INT fMultIceil(FIXP_DBL a, INT b) {
  FIXP_DBL m, mi;
  INT m_e;

  m = fMultNorm(a, (FIXP_DBL)b, &m_e);

  if (m_e < (INT)0) {
    if (m_e > (INT)-DFRACT_BITS) {
      mi = (m >> (-m_e));
      if ((LONG)m & ((1 << (-m_e)) - 1)) {
        mi = mi + (FIXP_DBL)1;
      }
    } else {
      mi = (FIXP_DBL)1;
      if (m < (FIXP_DBL)0) {
        mi = (FIXP_DBL)0;
      }
    }
  } else {
    mi = scaleValueSaturate(m, m_e);
  }

  return ((INT)mi);
}
#endif /* FUNCTION_fMultIceil */

#ifndef FUNCTION_fDivNorm
/**
 * \brief Divide 2 FIXP_DBL values with normalization of input values.
 * \param num numerator
 * \param denum denominator
 * \param result_e pointer to an INT where the exponent of the result is stored
 * into
 * \return num/denum with exponent = *result_e
 */
FIXP_DBL fDivNorm(FIXP_DBL num, FIXP_DBL denom, INT *result_e);

/**
 * \brief Divide 2 positive FIXP_DBL values with normalization of input values.
 * \param num numerator
 * \param denum denominator
 * \return num/denum with exponent = 0
 */
FIXP_DBL fDivNorm(FIXP_DBL num, FIXP_DBL denom);

/**
 * \brief Divide 2 signed FIXP_DBL values with normalization of input values.
 * \param num numerator
 * \param denum denominator
 * \param result_e pointer to an INT where the exponent of the result is stored
 * into
 * \return num/denum with exponent = *result_e
 */
FIXP_DBL fDivNormSigned(FIXP_DBL L_num, FIXP_DBL L_denum, INT *result_e);

/**
 * \brief Divide 2 signed FIXP_DBL values with normalization of input values.
 * \param num numerator
 * \param denum denominator
 * \return num/denum with exponent = 0
 */
FIXP_DBL fDivNormSigned(FIXP_DBL num, FIXP_DBL denom);
#endif /* FUNCTION_fDivNorm */

/**
 * \brief Adjust mantissa to exponent -1
 * \param a_m mantissa of value to be adjusted
 * \param pA_e pointer to the exponen of a_m
 * \return adjusted mantissa
 */
inline FIXP_DBL fAdjust(FIXP_DBL a_m, INT *pA_e) {
  INT shift;

  shift = fNorm(a_m) - 1;
  *pA_e -= shift;

  return scaleValue(a_m, shift);
}

#ifndef FUNCTION_fAddNorm
/**
 * \brief Add two values with normalization
 * \param a_m mantissa of first summand
 * \param a_e exponent of first summand
 * \param a_m mantissa of second summand
 * \param a_e exponent of second summand
 * \param pResult_e pointer to where the exponent of the result will be stored
 * to.
 * \return mantissa of result
 */
inline FIXP_DBL fAddNorm(FIXP_DBL a_m, INT a_e, FIXP_DBL b_m, INT b_e,
                         INT *pResult_e) {
  INT result_e;
  FIXP_DBL result_m;

  /* If one of the summands is zero, return the other.
     This is necessary for the summation of a very small number to zero */
  if (a_m == (FIXP_DBL)0) {
    *pResult_e = b_e;
    return b_m;
  }
  if (b_m == (FIXP_DBL)0) {
    *pResult_e = a_e;
    return a_m;
  }

  a_m = fAdjust(a_m, &a_e);
  b_m = fAdjust(b_m, &b_e);

  if (a_e > b_e) {
    result_m = a_m + (b_m >> fMin(a_e - b_e, DFRACT_BITS - 1));
    result_e = a_e;
  } else {
    result_m = (a_m >> fMin(b_e - a_e, DFRACT_BITS - 1)) + b_m;
    result_e = b_e;
  }

  *pResult_e = result_e;
  return result_m;
}

inline FIXP_DBL fAddNorm(FIXP_DBL a_m, INT a_e, FIXP_DBL b_m, INT b_e,
                         INT result_e) {
  FIXP_DBL result_m;

  a_m = scaleValue(a_m, a_e - result_e);
  b_m = scaleValue(b_m, b_e - result_e);

  result_m = a_m + b_m;

  return result_m;
}
#endif /* FUNCTION_fAddNorm */

/**
 * \brief Divide 2 FIXP_DBL values with normalization of input values.
 * \param num numerator
 * \param denum denomintator
 * \return num/denum with exponent = 0
 */
FIXP_DBL fDivNormHighPrec(FIXP_DBL L_num, FIXP_DBL L_denum, INT *result_e);

#ifndef FUNCTION_fPow
/**
 * \brief return 2 ^ (exp_m * 2^exp_e)
 * \param exp_m mantissa of the exponent to 2.0f
 * \param exp_e exponent of the exponent to 2.0f
 * \param result_e pointer to a INT where the exponent of the result will be
 * stored into
 * \return mantissa of the result
 */
FIXP_DBL f2Pow(const FIXP_DBL exp_m, const INT exp_e, INT *result_e);

/**
 * \brief return 2 ^ (exp_m * 2^exp_e). This version returns only the mantissa
 * with implicit exponent of zero.
 * \param exp_m mantissa of the exponent to 2.0f
 * \param exp_e exponent of the exponent to 2.0f
 * \return mantissa of the result
 */
FIXP_DBL f2Pow(const FIXP_DBL exp_m, const INT exp_e);

/**
 * \brief return x ^ (exp_m * 2^exp_e), where log2(x) = baseLd_m * 2^(baseLd_e).
 * This saves the need to compute log2() of constant values (when x is a
 * constant).
 * \param baseLd_m mantissa of log2() of x.
 * \param baseLd_e exponent of log2() of x.
 * \param exp_m mantissa of the exponent to 2.0f
 * \param exp_e exponent of the exponent to 2.0f
 * \param result_e pointer to a INT where the exponent of the result will be
 * stored into
 * \return mantissa of the result
 */
FIXP_DBL fLdPow(FIXP_DBL baseLd_m, INT baseLd_e, FIXP_DBL exp_m, INT exp_e,
                INT *result_e);

/**
 * \brief return x ^ (exp_m * 2^exp_e), where log2(x) = baseLd_m * 2^(baseLd_e).
 * This saves the need to compute log2() of constant values (when x is a
 * constant). This version does not return an exponent, which is
 * implicitly 0.
 * \param baseLd_m mantissa of log2() of x.
 * \param baseLd_e exponent of log2() of x.
 * \param exp_m mantissa of the exponent to 2.0f
 * \param exp_e exponent of the exponent to 2.0f
 * \return mantissa of the result
 */
FIXP_DBL fLdPow(FIXP_DBL baseLd_m, INT baseLd_e, FIXP_DBL exp_m, INT exp_e);

/**
 * \brief return (base_m * 2^base_e) ^ (exp * 2^exp_e). Use fLdPow() instead
 * whenever possible.
 * \param base_m mantissa of the base.
 * \param base_e exponent of the base.
 * \param exp_m mantissa of power to be calculated of the base.
 * \param exp_e exponent of power to be calculated of the base.
 * \param result_e pointer to a INT where the exponent of the result will be
 * stored into.
 * \return mantissa of the result.
 */
FIXP_DBL fPow(FIXP_DBL base_m, INT base_e, FIXP_DBL exp_m, INT exp_e,
              INT *result_e);

/**
 * \brief return (base_m * 2^base_e) ^ N
 * \param base_m mantissa of the base
 * \param base_e exponent of the base
 * \param N power to be calculated of the base
 * \param result_e pointer to a INT where the exponent of the result will be
 * stored into
 * \return mantissa of the result
 */
FIXP_DBL fPowInt(FIXP_DBL base_m, INT base_e, INT N, INT *result_e);
#endif /* #ifndef FUNCTION_fPow */

#ifndef FUNCTION_fLog2
/**
 * \brief Calculate log(argument)/log(2) (logarithm with base 2). deprecated.
 * Use fLog2() instead.
 * \param arg mantissa of the argument
 * \param arg_e exponent of the argument
 * \param result_e pointer to an INT to store the exponent of the result
 * \return the mantissa of the result.
 * \param
 */
FIXP_DBL CalcLog2(FIXP_DBL arg, INT arg_e, INT *result_e);

/**
 * \brief calculate logarithm of base 2 of x_m * 2^(x_e)
 * \param x_m mantissa of the input value.
 * \param x_e exponent of the input value.
 * \param pointer to an INT where the exponent of the result is returned into.
 * \return mantissa of the result.
 */
FDK_INLINE FIXP_DBL fLog2(FIXP_DBL x_m, INT x_e, INT *result_e) {
  FIXP_DBL result_m;

  /* Short cut for zero and negative numbers. */
  if (x_m <= FL2FXCONST_DBL(0.0f)) {
    *result_e = DFRACT_BITS - 1;
    return FL2FXCONST_DBL(-1.0f);
  }

  /* Calculate log2() */
  {
    FIXP_DBL x2_m;

    /* Move input value x_m * 2^x_e toward 1.0, where the taylor approximation
       of the function log(1-x) centered at 0 is most accurate. */
    {
      INT b_norm;

      b_norm = fNormz(x_m) - 1;
      x2_m = x_m << b_norm;
      x_e = x_e - b_norm;
    }

    /* map x from log(x) domain to log(1-x) domain. */
    x2_m = -(x2_m + FL2FXCONST_DBL(-1.0));

    /* Taylor polynomial approximation of ln(1-x) */
    {
      FIXP_DBL px2_m;
      result_m = FL2FXCONST_DBL(0.0);
      px2_m = x2_m;
      for (int i = 0; i < LD_PRECISION; i++) {
        result_m = fMultAddDiv2(result_m, ldCoeff[i], px2_m);
        px2_m = fMult(px2_m, x2_m);
      }
    }
    /* Multiply result with 1/ln(2) = 1.0 + 0.442695040888 (get log2(x) from
     * ln(x) result). */
    result_m =
        fMultAddDiv2(result_m, result_m,
                     FL2FXCONST_DBL(2.0 * 0.4426950408889634073599246810019));

    /* Add exponent part. log2(x_m * 2^x_e) = log2(x_m) + x_e */
    if (x_e != 0) {
      int enorm;

      enorm = DFRACT_BITS - fNorm((FIXP_DBL)x_e);
      /* The -1 in the right shift of result_m compensates the fMultDiv2() above
       * in the taylor polynomial evaluation loop.*/
      result_m = (result_m >> (enorm - 1)) +
                 ((FIXP_DBL)x_e << (DFRACT_BITS - 1 - enorm));

      *result_e = enorm;
    } else {
      /* 1 compensates the fMultDiv2() above in the taylor polynomial evaluation
       * loop.*/
      *result_e = 1;
    }
  }

  return result_m;
}

/**
 * \brief calculate logarithm of base 2 of x_m * 2^(x_e)
 * \param x_m mantissa of the input value.
 * \param x_e exponent of the input value.
 * \return mantissa of the result with implicit exponent of LD_DATA_SHIFT.
 */
FDK_INLINE FIXP_DBL fLog2(FIXP_DBL x_m, INT x_e) {
  if (x_m <= FL2FXCONST_DBL(0.0f)) {
    x_m = FL2FXCONST_DBL(-1.0f);
  } else {
    INT result_e;
    x_m = fLog2(x_m, x_e, &result_e);
    x_m = scaleValue(x_m, result_e - LD_DATA_SHIFT);
  }
  return x_m;
}

#endif /* FUNCTION_fLog2 */

#ifndef FUNCTION_fAddSaturate
/**
 * \brief Add with saturation of the result.
 * \param a first summand
 * \param b second summand
 * \return saturated sum of a and b.
 */
inline FIXP_SGL fAddSaturate(const FIXP_SGL a, const FIXP_SGL b) {
  LONG sum;

  sum = (LONG)(SHORT)a + (LONG)(SHORT)b;
  sum = fMax(fMin((INT)sum, (INT)MAXVAL_SGL), (INT)MINVAL_SGL);
  return (FIXP_SGL)(SHORT)sum;
}

/**
 * \brief Add with saturation of the result.
 * \param a first summand
 * \param b second summand
 * \return saturated sum of a and b.
 */
inline FIXP_DBL fAddSaturate(const FIXP_DBL a, const FIXP_DBL b) {
  LONG sum;

  sum = (LONG)(a >> 1) + (LONG)(b >> 1);
  sum = fMax(fMin((INT)sum, (INT)(MAXVAL_DBL >> 1)), (INT)(MINVAL_DBL >> 1));
  return (FIXP_DBL)(LONG)(sum << 1);
}
#endif /* FUNCTION_fAddSaturate */

INT fixp_floorToInt(FIXP_DBL f_inp, INT sf);
FIXP_DBL fixp_floor(FIXP_DBL f_inp, INT sf);

INT fixp_ceilToInt(FIXP_DBL f_inp, INT sf);
FIXP_DBL fixp_ceil(FIXP_DBL f_inp, INT sf);

INT fixp_truncateToInt(FIXP_DBL f_inp, INT sf);
FIXP_DBL fixp_truncate(FIXP_DBL f_inp, INT sf);

INT fixp_roundToInt(FIXP_DBL f_inp, INT sf);
FIXP_DBL fixp_round(FIXP_DBL f_inp, INT sf);

/*****************************************************************************

 array for 1/n, n=1..80

****************************************************************************/

extern const FIXP_DBL invCount[80];

LNK_SECTION_INITCODE
inline void InitInvInt(void) {}

/**
 * \brief Calculate the value of 1/i where i is a integer value. It supports
 *        input values from 1 upto (80-1).
 * \param intValue Integer input value.
 * \param FIXP_DBL representation of 1/intValue
 */
inline FIXP_DBL GetInvInt(int intValue) {
  return invCount[fMin(fMax(intValue, 0), 80 - 1)];
}

#endif /* FIXPOINT_MATH_H */