Running Camera Tests

To test the on-device functionality:

  1. fx set [product].[board] --with //bundles:tests
  2. You may have to re-flash zedboot if you flashed with a different fx set command
  3. fx serve
  4. Restart the target device in the netboot cable configuration
  5. Run fx run-test camera_full_on_device_test

Note: most on-device tests require the camera to be physically enabled (i.e. the device must not be muted). If a test determines that the device may be muted, a warning will be displayed and the test will be skipped.

To test camera functionality manually:

  1. Follow steps 1 throuh 4 for on-device test setup
  2. Run fx shell tiles_ctl start
  3. Run fx shell tiles_ctl add fuchsia-pkg://

To test camera libraries off-device:

You can follow the directions above to test on the device, and run: fx run-test camera_full_test


  1. fx set workstation.x64 --with //bundles:tests
  2. fx build
  3. fx serve
  4. In another terminal: fx emu -N
  5. In another terminal: fx run-test camera_full_test

To run single tests:

Single components can be tested by following the instructions above, and adding a -t test_name to the end. For example:

fx run-test camera_full_test -t gdc-task