Quick Start Recipes

Checking out the source code

The Magenta Git repository is located at: https://fuchsia.googlesource.com/magenta

To clone the repository, assuming you setup the $SRC variable in your environment:

$ git clone https://fuchsia.googlesource.com/magenta $SRC/magenta

For the purpose of this document, we will assume that Magenta is checked out in $SRC/magenta and that we will build toolchains, QEMU, etc alongside that. Various make invocations are presented with a “-j32” option for parallel make. If that‘s excessive for the machine you’re building on, try -j16 or -j8.

Preparing the build environment


On Ubuntu this should obtain the necessary pre-reqs:

sudo apt-get install texinfo libglib2.0-dev autoconf libtool libsdl-dev build-essential


Install the Xcode Command Line Tools:

xcode-select --install

Install the other pre-reqs:

  • Using Homebrew:
brew install wget pkg-config glib autoconf automake libtool
  • Using MacPorts:
port install autoconf automake libtool libpixman pkgconfig glib2

Install Toolchains

If you're developing on Linux or macOS, there are prebuilt toolchain binaries avaiable. Just run this script from your Magenta working directory:


If you would like to build the toolchains yourself, follow the instructions later in the document.

Build Magenta

Build results will be in $SRC/magenta/build-{qemu-arm64,pc-x86-64}

The variable $BUILDDIR in examples below refers to the build output directory for the particular build in question.

cd $SRC/magenta

# for aarch64
make -j32 magenta-qemu-arm64

# for x86-64
make -j32 magenta-pc-x86-64

Using Clang

To build Magenta using Clang as the target toolchain, set the USE_CLANG=true variable when invoking Make.

cd $SRC/magenta

# for aarch64
make -j32 USE_CLANG=true magenta-qemu-arm64

# for x86-64
make -j32 USE_CLANG=true magenta-pc-x86-64

Building Magenta for all targets

# The -r enables release builds as well
./scripts/buildall -r

Please build for all targets before submitting to ensure builds work on all architectures.


You can skip this if you're only testing on actual hardware, but the emulator is handy for quick local tests and generally worth having around.

See QEMU for information on building and using QEMU with magenta.

Build Toolchains (Optional)

If the prebuilt toolchain binaries do not work for you, there are a set of scripts which will download and build suitable gcc toolchains for building Magenta for the ARM64 and x86-64 architectures:

cd $SRC
git clone https://fuchsia.googlesource.com/third_party/gcc_none_toolchains toolchains
cd toolchains
./doit -a 'arm aarch64 x86_64' -f -j32

Configure PATH for toolchains

If you're using the prebuilt toolchains, you can skip this step, since the build will find them automatically.

# on Linux
export PATH=$PATH:$SRC/toolchains/aarch64-elf-5.3.0-Linux-x86_64/bin
export PATH=$PATH:$SRC/toolchains/x86_64-elf-5.3.0-Linux-x86_64/bin

# on Mac
export PATH=$PATH:$SRC/toolchains/aarch64-elf-5.3.0-Darwin-x86_64/bin
export PATH=$PATH:$SRC/toolchains/x86_64-elf-5.3.0-Darwin-x86_64/bin

Copying files to and from Magenta

With local link IPv6 configured, the host tool ./build-magenta-ARCH/tools/netcp can be used to copy files.

# Copy the file myprogram to Magenta
netcp myprogram :/tmp/myprogram

# Copy the file myprogram back to the host
netcp :/tmp/myprogram myprogram

Including Additional Userspace Files

The Magenta build creates a bootfs image containing necessary userspace components for the system to boot (the device manager, some device drivers, etc). The kernel is capable of including a second bootfs image which is provided by QEMU or the bootloader as a ramdisk image.

To create such a bootfs image, use the mkbootfs tool that's generated as part of the build. It can assemble a bootfs image for either source directories (in which case every file in the specified directory and its subdirectories are included) or via a manifest file which specifies on a file-by-file basis which files to include.

$BUILDDIR/tools/mkbootfs -o extra.bootfs @/path/to/directory

echo "issue.txt=/etc/issue" > manifest
echo "etc/hosts=/etc/hosts" >> manifest
$BUILDDIR/tools/mkbootfs -o extra.bootfs manifest

On the booted Magenta system, the files in the bootfs will appear under /boot, so in the above manifest example, the “hosts” file would appear at /boot/etc/hosts.

For QEMU, use the -x option to the run-magenta-* scripts to specify an extra bootfs image.

Network Booting

The GigaBoot20x6 bootloader speaks a simple network boot protocol (over IPV6 UDP) which does not require any special host configuration or privileged access to use.

It does this by taking advantage of IPV6 Link Local Addressing and Multicast, allowing the device being booted to advertise its bootability and the host to find it and send a system image to it.

If you have a device (for example a Broadwell or Skylake Intel NUC) running GigaBoot20x6, you can boot Magenta on it like so:

$BUILDDIR/tools/bootserver $BUILDDIR/magenta.bin

# if you have an extra bootfs image (see above):
$BUILDDIR/tools/bootserver $BUILDDIR/magenta.bin /path/to/extra.bootfs

By default bootserver will continue to run and every time it obsveres a netboot beacon it will send the kernel (and bootfs if provided) to that device. If you pass the -1 option, bootserver will exit after a successful boot instead.

Network Log Viewing

The default build of Magenta includes a network log service that multicasts the system log over the link local IPv6 UDP. Please note that this is a quick hack and the protocol will certainly change at some point.

For now, if you're running Magenta on QEMU with the -N flag or running on hardware with a supported ethernet interface (ASIX USB Dongle or Intel Ethernet on NUC), the loglistener tool will observe logs broadcast over the local link:



For random tips on debugging in the magenta environment see debugging.