| # GAP PTS Instructions |
| |
| ## Setup |
| Tools used to pass GAP tests in PTS: |
| * ACTS (see \<fuchsia_root\>/src/connectivity/bluetooth/docs/pts/acts_pts_setup.md) |
| * Use the BluetoothCmdLineTest tool for all tests: |
| * act.py -c \<config\> -tc BluetoothCmdLineTest |
| * SL4F (see \<fuchsia_root\>/garnet/bin/sl4f/README.md) |
| |
| ## IXIT Values |
| TSPX_iut_device_name_in_adv_packaet_for_random_address: fs_test |
| |
| ## TESTS |
| |
| ### GAP/DISC/NONM/BV-01-C |
| ACTS Steps: |
| 1. [PTS Interaction] - Press Yes for the ability to send a non-connectable advertisement |
| 2. `ble_start_generic_nonconnectable_advertisement` |
| 3. `ble_stop_advertisement` |
| |
| ### GAP/DISC/NONM/BV-02-C |
| |
| ### GAP/DISC/GENM/BV-01-C |
| ACTS Steps: |
| 1. [PTS Interaction] - Press Yes for the ability to send a non-connectable advertisement |
| 2. `ble_start_generic_nonconnectable_advertisement` |
| 3. [PTS Interaction] - Press OK |
| 4. `ble_stop_advertisement` |
| |
| ### GAP/DISC/GENM/BV-02-C |
| ACTS Steps: |
| 1. [PTS Interaction] - Press Yes for the ability to send a non-connectable advertisement |
| 2. `ble_start_generic_connectable_advertisement` |
| 3. [PTS Interaction] - Press OK |
| 4. `ble_stop_advertisement` |
| |
| ### GAP/DISC/GENP/BV-01-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press OK |
| 2. `btc_request_discovery true` (wait some time for scan results) |
| 3. `btc_request_discovery false` |
| 4. `btc_get_known_remote_devices` |
| 5. [PTS Interaction] - Validate PTS is found in the scan results and press OK |
| |
| ### GAP/DISC/GENP/BV-02-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press OK |
| 2. `btc_request_discovery true` (wait some time for scan results) |
| 3. `btc_request_discovery false` |
| 4. `btc_get_known_remote_devices` |
| 5. [PTS Interaction] - Validate PTS is found in the scan results and press OK |
| |
| ### GAP/DISC/GENP/BV-03-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press OK |
| 2. `btc_request_discovery true` (wait some time for scan results) |
| 3. `btc_request_discovery false` |
| 4. `btc_get_known_remote_devices` |
| 5. [PTS Interaction] - Validate PTS is not found in the scan results and press OK |
| |
| ### GAP/DISC/GENP/BV-04-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press OK |
| 2. `btc_request_discovery true` (wait some time for scan results) |
| 3. `btc_request_discovery false` |
| 4. `btc_get_known_remote_devices` |
| 5. [PTS Interaction] - Validate PTS is not found in the scan results and press OK |
| |
| ### GAP/DISC/GENP/BV-05-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press Yes |
| 2. `btc_request_discovery true` (wait some time for scan results) |
| 3. `btc_request_discovery false` |
| 4. `btc_get_known_remote_devices` |
| 5. [PTS Interaction] - Validate PTS is not found in the scan results and press OK |
| |
| ### GAP/IDLE/NAMP/BV-01-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. |
| |
| ACTS Steps: |
| 1. [PTS Interaction] Press Yes |
| 2. `tool_refresh_unique_id_using_bt_control` |
| 3. `gattc_connect` |
| 4. `gattc_read_all_chars` |
| 5. `gattc_disconnect` |
| |
| ### GAP/IDLE/NAMP/BV-02-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. |
| |
| ACTS Steps: |
| 1. [PTS Interaction] Press Yes |
| 2. `tool_refresh_unique_id_using_bt_control` |
| 3. `gattc_connect` |
| |
| ### GAP/IDLE/GIN/BV-01-C |
| ACTS Steps: |
| 1. `tool_refresh_unique_id_using_bt_control` |
| 2. [PTS Interaction] Press Yes if peer id is found |
| |
| ### GAP/IDLE/DED/BV-02-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press Ok/Yes |
| 2. `tool_refresh_unique_id_using_bt_control` |
| 3. [PTS Interaction] Press yes if peer ID was found based on the given name |
| |
| ### GAP/CONN/NCON/BV-01-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press Ok/Yes |
| 2. `ble_start_generic_nonconnectable_advertisement` |
| |
| ### GAP/CONN/NCON/BV-02-C |
| ACTS Steps: |
| 1. [PTS Interaction] Press No |
| 2. `ble_start_generic_nonconnectable_advertisement` |
| |
| ### GAP/CONN/UCON/BV-01-C |
| ACTS Steps: |
| 1. `ble_start_generic_connectable_advertisement` |
| |
| ### GAP/CONN/UCON/BV-02-C |
| ACTS Steps: |
| 1. `ble_start_generic_connectable_advertisement` |
| |
| ### GAP/CONN/ACEP/BV-01-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Note: Send the connection request very quickly to PTS after the test starts |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| ### GAP/CONN/GCEP/BV-01-C |
| ACTS Steps: |
| 1. `tool_refresh_unique_id` |
| 2. `gattc_connect` |
| 3. `gattc_disconnect` |
| |
| ### GAP/CONN/GCEP/BV-02-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| |
| ### GAP/CONN/DCEP/BV-01-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| ### GAP/CONN/DCEP/BV-03-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| ### GAP/CONN/CPUP/BV-04-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| |
| ### GAP/CONN/CPUP/BV-05-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| ### GAP/CONN/CPUP/BV-06-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| ### GAP/CONN/TERM/BV-01-C |
| Note: Run GAP/CONN/GCEP/BV-02-C first to get the unique id needed. Send outgoing connection very quickly after the test starts. |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| ACTS Steps: |
| 1. [PTS Interaction] - Click Yes to indicate the support of both central and peripheral |
| 1. `gattc_connect` |
| 2. `gattc_disconnect` |
| |
| ### GAP/BOND/NBON/BV-01-C |
| |
| ### GAP/BOND/NBON/BV-02-C |
| |
| ### GAP/BOND/NBON/BV-03-C |
| Pre-steps: |
| Replace TSPX_bd_addr_iut with the random address of the Fuchsia device. |
| This can be one by: |
| 1. Advertising on Android with nrf connect, connecting to it with the Fuchsia device and then inputting the address to PTS before running the test. This is tedious but works. |
| |
| Note: PTS is buggy, run twice |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `ble_start_generic_connectable_advertisement` |
| 3. [PTS Interaction] - Press OK to disconnect |
| |
| ### GAP/BOND/BON/BV-01-C |
| Pre-steps: |
| Note: Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `ble_start_generic_connectable_advertisement` |
| 3. `btc_get_known_remote_devices` - Save peer 'id' from the response |
| 4. tool_set_unique_mac_addr_id <'id from step 3'> |
| 5. [PTS Interaction] - Press OK to disconnect |
| 6. `ble_start_generic_connectable_advertisement` |
| |
| ### GAP/BOND/BON/BV-02-C |
| Note: PTS is buggy |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `tool_refresh_unique_id` |
| 3. `gattc_connect` |
| 4. `btc_pair ENCRYPTED BONDABLE LE` |
| 5. [PTS Interaction] - Press OK to disconnect the link |
| 6. `gattc_connect` |
| 7. [PTS Interaction] - Press OK to disconnect the link |
| |
| ### GAP/BOND/BON/BV-03-C |
| Note: PTS is buggy, run twice |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `ble_start_generic_connectable_advertisement` |
| 3. [PTS Interaction] - Press OK to disconnect |
| 4. `ble_start_generic_connectable_advertisement` |
| 5. [PTS Interaction] - Press OK to disconnect |
| 6. `ble_start_generic_connectable_advertisement` |
| 7. [PTS Interaction] - Press OK to disconnect |
| |
| ### GAP/BOND/BON/BV-04-C |
| Note: PTS is buggy |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| |
| ACTS Steps:This can be one by: |
| 1. `btc_accept_pairing` |
| 2. `tool_refresh_unique_id` |
| 3. `gattc_connect` |
| 4. `gattc_disconnect` - When prompted |
| 4. `gattc_connect` |
| 5. [PTS Interaction] - Press OK to disconnect the link |
| |
| |
| ### GAP/SEC/AUT/BV-02-C |
| ### GAP/SEC/AUT/BV-11-C |
| ACTS Steps: |
| 1. `gatts_setup_database TEST_DB_2` |
| 2. `btc_set_io_capabilities KEYBOARD DISPLAY` |
| 3. `btc_accept_pairing` |
| 4. `ble_start_generic_connectable_advertisement` |
| 5. [PTS Interaction] - input 0x000e |
| 6. `btc_input_pairing_pin [pin]` - Pin from PTS prompt |
| |
| ### GAP/SEC/AUT/BV-12-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| |
| ACTs Steps |
| 1. `tool_refresh_unique_id` |
| 2. `btc_accept_pairing` |
| 3. `gatts_setup_database TEST_DB_2` |
| 4. `gattc_connect` |
| 5. [PTS Interaction] - Enter the handle 000e into PTS for the characteristic handle with insufficient authentication |
| 6. bt-cli> pair <id> ENC T LE |
| |
| ### GAP/SEC/AUT/BV-13-C |
| |
| ### GAP/SEC/AUT/BV-14-C |
| |
| ### GAP/SEC/AUT/BV-17-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| |
| ACTs Steps |
| 1. `tool_refresh_unique_id` |
| 2. `btc_accept_pairing` |
| 3. `gattc_connect` |
| 4. `gattc_read_char_by_id 0009` |
| 6. bt-cli> pair <id> ENC T LE |
| |
| ### GAP/SEC/AUT/BV-18-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `ble_start_generic_connectable_advertisement` |
| 3. `btc_get_known_remote_devices` - Save peer 'id' from the response |
| 4. tool_set_unique_mac_addr_id <'id from step 3'> |
| 5. `gattc_connect` |
| 6. `gattc_read_char_by_id` [id from PTS] |
| |
| ### GAP/SEC/AUT/BV-19-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `tool_refresh_unique_id` |
| 2. `gattc_connect` |
| 4. `btc_pair ENCRYPTED BONDABLE LE` |
| 5. [PTS Interaction] - Press OK to disconnect link |
| 6. While disconnected `btc_forget_all_known_devices` |
| 7. `tool_refresh_unique_id` |
| 8. `gattc_connect` |
| 9. `gattc_read_char_by_id [id]` - ID provided by PTS |
| 10. `gattc_read_char_by_id [id]` - ID provided by PTS |
| |
| ### GAP/SEC/AUT/BV-20-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| Note: This test is pretty broken as it doesn't respond to security upgrades after the read char command. bt-cli will have to be used in conjunction. |
| |
| ACTS Steps: |
| 1. Run bt-cli in another window |
| 2. `btc_accept_pairing` |
| 3. `ble_start_generic_connectable_advertisement` |
| 4. `ble_start_generic_connectable_advertisement` |
| 5. `btc_get_known_remote_devices` - Save peer 'id' from the response |
| 6. tool_set_unique_mac_addr_id <'id from step 5'> |
| 7. `gattc_connect` |
| 8. `gattc_read_char_by_id [id]` - ID provided by PTS |
| 9. bt-cli> pair <id> ENC T LE |
| 10. `gattc_read_char_by_id [id]` - ID provided by PTS |
| 11. bt-cli> pair <id> ENC T LE |
| |
| ### GAP/SEC/AUT/BV-21-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| Note: Very finiky test |
| |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `tool_refresh_unique_id` |
| 2. `gattc_connect` |
| 4. `btc_pair ENCRYPTED BONDABLE LE` |
| 5. [PTS Interaction] - Press OK to disconnect link |
| 6. `gattc_connect` |
| |
| |
| ### GAP/SEC/AUT/BV-22-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| ACTS Steps: |
| 1. `btc_accept_pairing` |
| 2. `ble_start_generic_connectable_advertisement` |
| 3. `ble_start_generic_connectable_advertisement` |
| 4. `btc_get_known_remote_devices` - Save peer 'id' from the response |
| 5. tool_set_unique_mac_addr_id <'id from step 4'> |
| 6. `btc_pair ENCRYPTED BONDABLE LE` |
| 7. [PTS Interaction] - Verify value and press OK |
| |
| ### GAP/SEC/AUT/BV-23-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| Note: Secure connections only mode must be enabled. |
| ACTS Steps: |
| 1. `btc_set_io_capability KEYBOARD DISPLAY` |
| 2. `btc_accept_pairing` |
| 3. `gatts_setup_database TEST_DB_2` |
| 4. `ble_start_generic_connectable_advertisement` |
| 5. `ble_start_generic_connectable_advertisement` |
| 6. [PTS Interaction] - Enter 000e for the handle with insufficient authentication |
| |
| ### GAP/SEC/AUT/BV-24-C |
| Pre-steps: |
| Run the test a first time and it will fail. Change the TSPX_bd_addr_iut ixit value address to be the peer address in the PTS logs that start with: |
| SEC_LE?SEC_LE_REMOTE_CSRK_REQUEST_IND=PDU |
| peerAddr: 'xxxxxxxxxxxx'O |
| Also verify that neither PTS or Fuchsia has no bonded devices before the test is run. |
| Note: Secure connections only mode must be enabled. |
| Note: This test is a bit flakey (sometimes stalls) |
| ACTS Steps: |
| 1. `btc_set_io_capability KEYBOARD DISPLAY` |
| 2. `btc_accept_pairing` |
| 3. `gatts_setup_database TEST_DB_2` |
| 4. `tool_refresh_unique_id` |
| 5. `gattc_connect` |
| 6. `gattc_disconnect` |
| 7. `gattc_connect` |
| 8. [PTS Interaction] - Enter 000e for the handle with insufficient authentication |
| 9. `btc_get_pairing_pin` (run until you get a full 6 digit key. the first pairing attempt may populate the first call with just 0) |
| 10. [PTS Interaction] - Enter the pin from step 9 into PTS |
| |
| ### GAP/SEC/SEM/BI-04-C |
| ### GAP/SEC/SEM/BI-08-C |
| ### GAP/SEC/SEM/BI-09-C |
| ### GAP/SEC/SEM/BI-10-C |
| ### GAP/SEC/SEM/BV-04-C |
| ### GAP/SEC/SEM/BV-05-C |
| ### GAP/SEC/SEM/BV-06-C |
| ### GAP/SEC/SEM/BV-07-C |
| |
| ### GAP/SEC/SEM/BV-08-C |
| Tentative steps: |
| Set PSM in IXIT to 0001 |
| 1. `btc_set_io_capabilities KEYBOARD DISPLAY` |
| 2. `btc_accept_pairing` |
| 3. [PTS Interaction] - Press OK |
| 4. `btc_connect` |
| |
| ### GAP/SEC/SEM/BV-09-C |
| ### GAP/SEC/SEM/BV-10-C |
| ### GAP/SEC/SEM/BV-21-C |
| ### GAP/SEC/SEM/BV-22-C |
| ### GAP/SEC/SEM/BV-23-C |
| ### GAP/SEC/SEM/BV-24-C |
| ### GAP/SEC/SEM/BV-26-C |
| ### GAP/SEC/SEM/BV-27-C |
| ### GAP/SEC/SEM/BV-28-C |
| ### GAP/SEC/SEM/BV-29-C |
| |
| ### GAP/ADV/BV-01-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| ### GAP/ADV/BV-02-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| ### GAP/ADV/BV-03-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| ### GAP/ADV/BV-04-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| ### GAP/ADV/BV-05-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| ### GAP/ADV/BV-10-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| ### GAP/ADV/BV-11-C |
| Note: LE advertisement address must match in TSPX bd_addr_iut. Use a second device to find the LE advertisement address |
| |
| |
| ### GAP/DM/CON/BV-01-C |
| ACTS Steps: |
| 1. `btc_set_discoverable true` |
| 2. [PTS Interaction] - Press OK |
| |
| ### GAP/DM/BON/BV-01-C |
| |
| 1. `btc_accept_pairing` |
| 2. `btc_set_discoverable true` |
| 3. `btc disconnect` |
| 4. `tool_refrsh_unique_id` |
| 5. `gattc_connect` |
| 6. `btc_pair ENCRYPTED BONDABLE LE` |
| 7. [PTS Interaction] - Press OK to disconnect |
| 8. `gattc_connect` |
| 9. [PTS Interaction] - Press OK to disconnect |
| |
| ### GAP/DM/GIN/BV-01-C |
| ACTS Steps: |
| 1. `tool_refresh_unique_id_using_bt_control` |
| 2. `tool_refresh_unique_id` |
| 3. [PTS Interaction] - Verify steps 1 and 2 returned IDs and press OK |
| 4. `tool_refresh_unique_id_using_bt_control` |
| 5. `tool_refresh_unique_id` |
| 6. [PTS Interaction] - Press OK |
| |
| ### GAP/DM/NAD/BV-01-C |
| ACTS Steps: |
| 1. `tool_refresh_unique_id_using_bt_control` |
| 2. [PTS Interaction] - Verify ID found and press OK. |
| |
| ### GAP/DM/NAD/BV-02-C |
| ACTS Steps: |
| 1. `tool_refresh_unique_id` |
| 2. `gattc_connect` |
| 3. `gattc_read_all_chars` |
| 4. `gattc_disconnect` |
| |
| ### GAP/DM/LEP/BV-01-C |
| Note: Put public address in IXIT |
| ACTS Steps: |
| 1. `btc_set_discoverable_true` |
| 2. [PTS Interaction] - Press OK |
| 3. `ble_start_generic_connectable_advertisement` |
| [TBD on the rest, still a failure] |
| |
| ### GAP/DM/LEP/BV-02-C |
| ACTS Steps: |
| 1. `btc_set_discoverable_true` |
| 2. [PTS Interaction] - Press OK |
| 3. `ble_start_generic_connectable_advertisement` |
| |
| ### GAP/DM/LEP/BV-04-C |
| ### GAP/DM/LEP/BV-05-C |
| |
| ### GAP/DM/LEP/BV-06-C |
| ACTS Steps: |
| 1. `tool_refresh_unique_id` |
| 2. `gattc_connect` |
| |
| ### GAP/DM/LEP/BV-07-C |
| ACTS Steps: |
| 1. `ble_start_generic_connectable_advertisement` |
| |
| ### GAP/DM/LEP/BV-08-C |
| ACTS Steps: |
| 1. `ble_start_generic_connectable_advertisement` |
| |
| ### GAP/DM/LEP/BV-09-C |
| |
| |
| ### GAP/DM/LEP/BV-11-C |
| ACTS Steps: |
| 1. `btc_set_discoverable_true` |
| 2. [PTS Interaction] - Press OK |
| 3. `tool_refresh_unique_id` |
| 4. `gattc_connect` |
| 5. `gattc_disconnect` |
| |
| ### GAP/MOD/NDIS/BV-01-C |
| ACTS Steps: |
| None. Wait 30 seconds. |
| |
| ### GAP/MOD/GDIS/BV-01-C |
| ACTS Steps: |
| 1. `btc_set_discoverable_true` |
| 2. [PTS Interaction] - Press OK |
| |
| ### GAP/MOD/GDIS/BV-02-C |
| ACTS Steps: |
| 1. `btc_set_discoverable_true` |
| 2. [PTS Interaction] - Press OK |
| |
| ### GAP/MOD/CON/BV-01-C |
| ACTS Steps: |
| 1. `btc_set_discoverable_true` |
| 2. [PTS Interaction] - Press OK |
| |
| ### GAP/EST/LIE/BV-02-C |
| ### GAP/IDLE/BON/BV-05-C |
| ### GAP/IDLE/BON/BV-06-C |
| ### GAP/IDLE/DNDIS/BV-01-C |
