// Copyright 2016 The Fuchsia Authors
//
// Use of this source code is governed by a MIT-style
// license that can be found in the LICENSE file or at
// https://opensource.org/licenses/MIT

#include <bits.h>
#include <lib/acpi_lite.h>
#include <lib/acpi_lite/structures.h>
#include <lib/affine/ratio.h>
#include <zircon/errors.h>
#include <zircon/types.h>

#include <fbl/algorithm.h>
#include <fbl/auto_call.h>
#include <kernel/lockdep.h>
#include <kernel/spinlock.h>
#include <ktl/algorithm.h>
#include <ktl/limits.h>
#include <lk/init.h>
#include <platform/pc/acpi.h>
#include <platform/pc/hpet.h>
#include <vm/vm_aspace.h>

struct hpet_timer_registers {
  volatile uint64_t conf_caps;
  volatile uint64_t comparator_value;
  volatile uint64_t fsb_int_route;
  uint8_t _reserved[8];
} __PACKED;

struct hpet_registers {
  volatile uint64_t general_caps;
  uint8_t _reserved0[8];
  volatile uint64_t general_config;
  uint8_t _reserved1[8];
  volatile uint64_t general_int_status;
  uint8_t _reserved2[0xf0 - 0x28];
  volatile uint64_t main_counter_value;
  uint8_t _reserved3[8];
  struct hpet_timer_registers timers[];
} __PACKED;

DECLARE_SINGLETON_SPINLOCK(hpet_lock);

static bool hpet_present = false;
static struct hpet_registers* hpet_regs;
uint64_t _hpet_ticks_per_ms;
static uint64_t tick_period_in_fs;
static uint8_t num_timers;

/* Minimum number of ticks ahead a oneshot timer needs to be.  Targetted
 * to be 100ns */
static uint64_t min_ticks_ahead;

#define MAX_PERIOD_IN_FS 0x05F5E100ULL

/* Bit masks for the general_config register */
#define GEN_CONF_EN 1

/* Bit masks for the per-time conf_caps register */
#define TIMER_CONF_LEVEL_TRIGGERED (1ULL << 1)
#define TIMER_CONF_INT_EN (1ULL << 2)
#define TIMER_CONF_PERIODIC (1ULL << 3)
#define TIMER_CAP_PERIODIC(reg) BIT_SET(reg, 4)
#define TIMER_CAP_64BIT(reg) BIT_SET(reg, 5)
#define TIMER_CONF_PERIODIC_SET_COUNT (1ULL << 6)
#define TIMER_CONF_IRQ(n) ((uint64_t)((n) & (0x1f)) << 9)
#define TIMER_CAP_IRQS(reg) static_cast<uint32_t>(BITS_SHIFT(reg, 63, 32))

static void hpet_init(uint level) {
  // Look up the HPET table.
  const acpi_lite::AcpiHpetTable* hpet_desc =
      acpi_lite::GetTableByType<acpi_lite::AcpiHpetTable>(GlobalAcpiLiteParser());
  if (hpet_desc == nullptr) {
    dprintf(INFO, "No HPET ACPI table found.\n");
    return;
  }

  // Ensure the HPET table uses MMIO.
  if (hpet_desc->address.address_space_id != ACPI_ADDR_SPACE_MEMORY) {
    dprintf(INFO, "HPET unsupported: require MMIO-based HPET.\n");
    return;
  }

  zx_status_t res = VmAspace::kernel_aspace()->AllocPhysical(
      "hpet", PAGE_SIZE,          /* size */
      (void**)&hpet_regs,         /* returned virtual address */
      PAGE_SIZE_SHIFT,            /* alignment log2 */
      hpet_desc->address.address, /* physical address */
      0,                          /* vmm flags */
      ARCH_MMU_FLAG_UNCACHED_DEVICE | ARCH_MMU_FLAG_PERM_READ | ARCH_MMU_FLAG_PERM_WRITE);
  if (res != ZX_OK) {
    return;
  }

  // If something goes wrong, make sure we free the HPET registers.
  auto cleanup = fbl::MakeAutoCall([]() {
    VmAspace::kernel_aspace()->FreeRegion(reinterpret_cast<vaddr_t>(hpet_regs));
    hpet_regs = nullptr;
    num_timers = 0;
  });

  bool has_64bit_count = BIT_SET(hpet_regs->general_caps, 13);
  tick_period_in_fs = hpet_regs->general_caps >> 32;
  if (tick_period_in_fs == 0 || tick_period_in_fs > MAX_PERIOD_IN_FS) {
    return;
  }

  /* We only support HPETs that are 64-bit and have at least two timers */
  num_timers = static_cast<uint8_t>(BITS_SHIFT(hpet_regs->general_caps, 12, 8) + 1);
  if (!has_64bit_count || num_timers < 2) {
    return;
  }

  /* Make sure all timers have interrupts disabled */
  for (uint8_t i = 0; i < num_timers; ++i) {
    hpet_regs->timers[i].conf_caps &= ~TIMER_CONF_INT_EN;
  }

  /* figure out the ratio of clock monotonic ticks to HPET ticks.  This is the
   * scaling factor when converting from HPET to clock mono.
   *
   * There are 10^6 fSec/clock mono tick
   * |tick_period_in_fs| fSec/HPET tick.
   *
   * So, there should be |tick_period_in_fs|/10^6 CM_ticks/HPET_ticks
   *
   * Compute this, make sure that we can represent it as a 32 bit ratio, then
   * store it.
   */
  uint64_t N = tick_period_in_fs;
  uint64_t D = 1000000;
  affine::Ratio::Reduce(&N, &D);

  // ASSERT that we can represent this as a 32 bit ratio.  If we cannot, it
  // means that tick_period_in_fs is a number so large, and with so few prime
  // factors of 2 and 5, that it cannot be reduced to fit into a 32 bit
  // integer.  This would imply an extremely odd and slow clock.  For now,
  // just ASSERT that this will never happen.
  ZX_ASSERT_MSG(
      (N <= ktl::numeric_limits<uint32_t>::max()) && (D <= ktl::numeric_limits<uint32_t>::max()),
      "Clock monotonic ticks : HPET ticks ratio (%lu : %lu) "
      "too large to store in a 32 bit ratio!!",
      N, D);
  hpet_ticks_to_clock_monotonic = {static_cast<uint32_t>(N), static_cast<uint32_t>(D)};

  _hpet_ticks_per_ms = 1000000000000ULL / tick_period_in_fs;
  min_ticks_ahead = 100000000ULL / tick_period_in_fs;
  hpet_present = true;

  dprintf(INFO, "HPET: detected at %#" PRIx64 " ticks per ms %" PRIu64 " num timers %hhu\n",
          hpet_desc->address.address, _hpet_ticks_per_ms, num_timers);

  // things went well, cancel our cleanup auto-call
  cleanup.cancel();
}

/* Begin running after ACPI tables are up */
LK_INIT_HOOK(hpet, hpet_init, LK_INIT_LEVEL_VM + 2)

zx_status_t hpet_timer_disable(uint n) {
  if (unlikely(n >= num_timers)) {
    return ZX_ERR_NOT_SUPPORTED;
  }

  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};
  hpet_regs->timers[n].conf_caps &= ~TIMER_CONF_INT_EN;

  return ZX_OK;
}

uint64_t hpet_get_value(void) {
  uint64_t v = hpet_regs->main_counter_value;
  uint64_t v2 = hpet_regs->main_counter_value;
  /* Even though the specification says it should not be necessary to read
   * multiple times, we have observed that QEMU converts the 64-bit
   * memory access in to two 32-bit accesses, resulting in bad reads. QEMU
   * reads the low 32-bits first, so the result is a large jump when it
   * wraps 32 bits.  To work around this, we return the lesser of two reads.
   */
  return ktl::min(v, v2);
}

zx_status_t hpet_set_value(uint64_t v) {
  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};

  if (hpet_regs->general_config & GEN_CONF_EN) {
    return ZX_ERR_BAD_STATE;
  }

  hpet_regs->main_counter_value = v;
  return ZX_OK;
}

zx_status_t hpet_timer_configure_irq(uint n, uint irq) {
  if (unlikely(n >= num_timers)) {
    return ZX_ERR_NOT_SUPPORTED;
  }

  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};

  uint32_t irq_bitmap = TIMER_CAP_IRQS(hpet_regs->timers[n].conf_caps);
  if (irq >= 32 || !BIT_SET(irq_bitmap, irq)) {
    return ZX_ERR_NOT_SUPPORTED;
  }

  uint64_t conf = hpet_regs->timers[n].conf_caps;
  conf &= ~TIMER_CONF_IRQ(~0ULL);
  conf |= TIMER_CONF_IRQ(irq);
  hpet_regs->timers[n].conf_caps = conf;

  return ZX_OK;
}

zx_status_t hpet_timer_set_oneshot(uint n, uint64_t deadline) {
  if (unlikely(n >= num_timers)) {
    return ZX_ERR_NOT_SUPPORTED;
  }

  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};

  uint64_t difference = deadline - hpet_get_value();
  if (unlikely(difference > (1ULL >> 63))) {
    /* Either this is a very long timer, or we wrapped around */
    return ZX_ERR_INVALID_ARGS;
  }
  if (unlikely(difference < min_ticks_ahead)) {
    return ZX_ERR_INVALID_ARGS;
  }

  hpet_regs->timers[n].conf_caps &= ~(TIMER_CONF_PERIODIC | TIMER_CONF_PERIODIC_SET_COUNT);
  hpet_regs->timers[n].comparator_value = deadline;
  hpet_regs->timers[n].conf_caps |= TIMER_CONF_INT_EN;

  return ZX_OK;
}

zx_status_t hpet_timer_set_periodic(uint n, uint64_t period) {
  if (unlikely(n >= num_timers)) {
    return ZX_ERR_NOT_SUPPORTED;
  }

  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};

  if (!TIMER_CAP_PERIODIC(hpet_regs->timers[n].conf_caps)) {
    return ZX_ERR_NOT_SUPPORTED;
  }

  /* It's unsafe to set a periodic timer while the hpet is running or the
   * main counter value is not 0. */
  if ((hpet_regs->general_config & GEN_CONF_EN) || hpet_regs->main_counter_value != 0ULL) {
    return ZX_ERR_BAD_STATE;
  }

  hpet_regs->timers[n].conf_caps |= TIMER_CONF_PERIODIC | TIMER_CONF_PERIODIC_SET_COUNT;
  hpet_regs->timers[n].comparator_value = period;
  hpet_regs->timers[n].conf_caps |= TIMER_CONF_INT_EN;

  return ZX_OK;
}

bool hpet_is_present(void) { return hpet_present; }

void hpet_enable(void) {
  DEBUG_ASSERT(hpet_is_present());

  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};
  hpet_regs->general_config |= GEN_CONF_EN;
}

void hpet_disable(void) {
  DEBUG_ASSERT(hpet_is_present());

  Guard<SpinLock, NoIrqSave> guard{hpet_lock::Get()};
  hpet_regs->general_config &= ~GEN_CONF_EN;
}

/* Blocks for the requested number of milliseconds.
 * For use in calibration */
void hpet_wait_ms(uint16_t ms) {
  uint64_t init_timer_value = hpet_regs->main_counter_value;
  uint64_t target = (uint64_t)ms * _hpet_ticks_per_ms;
  while (hpet_regs->main_counter_value - init_timer_value <= target)
    ;
}