# Copyright 2016 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# The GN files in //third_party/flutter all use $flutter_root/
# in place of // to refer to the root of the flutter source tree.
flutter_root = "//third_party/flutter"

# The GN files in //third_party/cobalt all use $cobalt_root/
# in place of // to refer to the root of the cobalt source tree.
cobalt_root = "//third_party/cobalt"

# Variable used in Zircon build files to declare absolute labels representing
# buildable artifacts.
# TODO(fxbug.dev/3367): remove when the build is unified.
zx = "//zircon"

# Variable used in Zircon build files to declare absolute labels representing
# build infrastructure (e.g. .gni files).
# TODO(fxbug.dev/3367): remove when the build is unified.
zx_build = "//build/unification/zn_build"

# Variable used in Zircon build files to declare the directory path for the
# BUILD.gn file that contains definitions for Zircon build specific configs.
zx_build_config = "//build/config/zircon"

declare_args() {
  # If set, the build will produce compilation analysis dumps, used for code
  # cross-referencing in code search.  The extra work done during analysis
  # is only needed for cross-referencing builds, so we're keeping the flag
  # and the analysis overhead turned off by default.
  is_analysis = false

  # Debug build.
  is_debug = true

  # Sets if we should output breakpad symbols for Fuchsia binaries.
  output_breakpad_syms = false

  # Controls whether we should output GSYM files for Fuchsia binaries.
  output_gsym = false
}

if (target_os == "") {
  target_os = "fuchsia"
}
if (target_cpu == "") {
  target_cpu = host_cpu
}
target_platform = "${target_os}-${target_cpu}"
if (current_cpu == "") {
  current_cpu = target_cpu
}
if (current_os == "") {
  current_os = target_os
}
current_platform = "${current_os}-${current_cpu}"

host_platform = "${host_os}-${host_cpu}"

if (target_os == "fuchsia") {
  target_toolchain = "//build/toolchain/fuchsia:${target_cpu}"
} else {
  assert(false, "Target OS not supported")
}

if (host_os == "linux" || host_os == "mac") {
  host_toolchain = "//build/toolchain:host_${host_cpu}"
} else {
  assert(false, "Host OS not supported")
}

host_x64_toolchain = "//build/toolchain:host_x64"
host_arm64_toolchain = "//build/toolchain:host_arm64"
linux_x64_toolchain = "//build/toolchain:linux_x64"
linux_arm64_toolchain = "//build/toolchain:linux_arm64"
unknown_wasm32_toolchain = "//build/toolchain:unknown_wasm32"

host_out_dir = get_label_info("//anything($host_toolchain)", "root_out_dir")

set_default_toolchain(target_toolchain)

# Some projects expect a default value for sources_assignment_filter.
sources_assignment_filter = []

# Variables used to refer to the in-tree python interpreter.
python_version = "3.8"
python_exe_src = "//prebuilt/third_party/python3/${host_platform}/bin/python${python_version}"

declare_args() {
  # *This should never be set as a build argument.*
  # It exists only to be set in `toolchain_args`.
  # See //build/toolchain/clang_toolchain.gni for details.
  # This variable is a scope giving details about the current toolchain:
  #     `toolchain_variant.base`
  #         [label] The "base" toolchain for this variant, *often the
  #         right thing to use in comparisons, not `current_toolchain`.*
  #         This is the toolchain actually referenced directly in GN
  #         source code.  If the current toolchain is not
  #         `shlib_toolchain` or a variant toolchain, this is the same
  #         as `current_toolchain`.  In one of those derivative
  #         toolchains, this is the toolchain the GN code probably
  #         thought it was in.  This is the right thing to use in a test
  #         like `toolchain_variant.base == target_toolchain`, rather
  #         rather than comparing against `current_toolchain`.
  #     `toolchain_variant.name`
  #         [string] The name of this variant, as used in `variant` fields
  #         in [`select_variant`](#select_variant) clauses.  In the base
  #         toolchain and its `shlib_toolchain`, this is `""`.
  #     `toolchain_variant.suffix`
  #         [string] This is "-${toolchain_variant.name}", "" if name is empty.
  #     `toolchain_variant.is_pic_default`
  #         [bool] This is true in `shlib_toolchain`.
  #     `toolchain_variant.tags`
  #         [list of strings] A list of liberal strings, each one describing a
  #         property of this toolchain instance. See
  #         //build/toolchain/variant_tags.gni for more details.
  #     `toolchain_variant.configs`
  #         [list of configs] A list of configs that are added after the default
  #         ones to all linkable targets for this toolchain() instance.
  #     `toolchain_variant.prefix_configs`
  #         [list of configs] A list of configs that are added before the default
  #         ones to all linkable targets for this toolchain() instance.
  #     `toolchain_variant.remove_common_configs`
  #         [list of configs] A list of configs that are removed from all
  #         linkable targets for this toolchain() instance. Useful when
  #         one of the default configs must not be used.
  #     `toolchain_variant.remove_shared_configs`
  #         [list of configs] Same a remove_common_configs, but only applies
  #         to non-executable (e.g. shared_library()) targets.
  #     `toolchain_variant.instrumented`
  #         [boolean] A convenience flag that is true iff "instrumented" is
  #         part of toolchain_variant.tags.
  #     `toolchain_variant.with_shared`
  #         [boolean] True iff this toolchain() instance has a secondary
  #         toolchain to build ELF shared-library code.
  #
  # The other fields are the variant's effects as defined in
  # [`known_variants`](#known_variants).
  toolchain_variant = {
    base = target_toolchain  # default toolchain
  }

  # *This should never be set as a build argument.*
  # It exists only to be set in `toolchain_args`.
  # For Zircon toolchains, this will be a scope whose schema
  # is documented in //build/toolchain/zircon/zircon_toolchain.gni.
  # For all other toolchains, this will be false.
  #
  # This allows testing for a Zircon-specific toolchain with:
  #
  #   if (zircon_toolchain != false) {
  #     // code path for Zircon-specific toolchains
  #   } else {
  #     // code path for non-Zircon ones.
  #   }
  zircon_toolchain = false
}

if (!defined(toolchain_variant.name)) {
  # Default values correspond to the default toolchain. For now, it is used
  # to build Fuchsia user binaries, so populate it accordingly. The only
  # non-obvious key is 'exclude_variant_tags', it must match the result
  # of calling clang_toolchain_suite() for $target_cpu, which currently
  # implies rejecting variants with the 'gcc' and 'kernel-only' tags.
  toolchain_variant.name = ""
  toolchain_variant.suffix = ""
  toolchain_variant.configs = []
  toolchain_variant.prefix_configs = []
  toolchain_variant.remove_common_configs = []
  toolchain_variant.remove_shared_configs = []
  toolchain_variant.deps = []
  toolchain_variant.is_pic_default = false
  toolchain_variant.with_shared = true
  toolchain_variant.instrumented = false
  toolchain_variant.tags = []
  toolchain_variant.exclude_variant_tags = [
    "gcc",
    "kernel-only",
  ]
}

is_android = false
is_chromeos = false
is_fuchsia = false
is_fuchsia_host = false
is_host = false
is_ios = false
is_linux = false
is_mac = false
is_win = false
is_clang = true
is_component_build = false
is_official_build = false

# This is set to allow third party projects to configure their GN build based
# on the knowledge that they're being built in the Fuchsia tree. In the
# subproject this can be tested with
#   `if (defined(is_fuchsia_tree) && is_fuchsia_tree) { ... }`
# thus allowing configuration without requiring all users of the subproject to
# set this variable.
is_fuchsia_tree = true

if (current_os == "fuchsia") {
  is_fuchsia = true
} else if (current_os == "linux") {
  is_linux = true
} else if (current_os == "mac") {
  is_mac = true
} else if (current_os == "win") {
  is_win = true
}

# Some library targets may be built as different type depending on the target
# platform. This variable specifies the default library type for each target.
if (is_fuchsia) {
  default_library_type = "shared_library"
} else {
  default_library_type = "static_library"
}

# When we are in a variant of host_toolchain, change the value of
# host_toolchain so that `if (is_host)` tests
# still match, since that is the conventional way to detect being in host
# context.  This means that any "...($host_toolchain)" label references
# from inside a variant of host_toolchain will refer to the variant
# (current_toolchain rather than host_toolchain).  To handle this, the
# `executable()` template below will define its target in other variant
# toolchains as a copy of the real executable.
if (toolchain_variant.base == host_x64_toolchain ||
    toolchain_variant.base == host_arm64_toolchain) {
  is_fuchsia_host = true
  is_host = true
  host_toolchain += toolchain_variant.suffix
}

# References should use `"label($shlib_toolchain)"` rather than
# `"label(${target_toolchain}-shared)"` or anything else.
shlib_toolchain = "${toolchain_variant.base}${toolchain_variant.suffix}-shared"

# Prepend the prefix configs, if any, before the default ones.
default_common_binary_configs = toolchain_variant.prefix_configs

# Note that Zircon toolchains and non-Zircon ones have a very different set
# of default configs for all target types.
if (zircon_toolchain == false) {
  # All binary targets will get this list of configs by default.
  default_common_binary_configs += [
    "//build/config:compiler",
    "//build/config:language",
    "//build/config:relative_paths",
    "//build/config:default_frame_pointers",
    "//build/config:default_include_dirs",
    "//build/config:default_linker_gc",
    "//build/config:default_optimize",
    "//build/config:default_debuginfo",
    "//build/config:default_warnings",
    "//build/config:no_exceptions",
    "//build/config:no_rtti",
    "//build/config:symbol_visibility_hidden",
    "//build/config:rust_edition_2018",
    "//build/config:rust_no_features",
    "//build/config:rust_target",
    "//build/config:rust_2018_idioms",
    "//build/config:werror",
  ]

  if (is_analysis) {
    default_common_binary_configs += [ "//build/config:rust_analysis" ]
  }

  if (is_debug) {
    default_common_binary_configs += [ "//build/config:debug" ]
  } else {
    default_common_binary_configs += [ "//build/config:release" ]
  }

  if (is_fuchsia) {
    default_common_binary_configs += [
      "//build/config/fuchsia:auto_var_init",
      "//build/config/fuchsia:large_rust_stack",
      "//build/config/fuchsia:thread_safety_annotations",
      "//build/config:icf",
      "//build/config:rust_panic_abort",
      "//build/config:rust_v0_symbol_mangling",

      # TODO(mcgrathr): Perhaps restrict this to only affected code.
      # For now, safest to do it everywhere.
      "//build/config/fuchsia:zircon_asserts",
    ]
  }

  if (is_mac) {
    default_common_binary_configs += [ "//build/config/mac:compiler" ]
  }
  if (is_linux) {
    default_common_binary_configs += [ "//build/config/linux:compiler" ]
  }

  default_common_binary_configs += [ "//build/config/lto:default" ]

  # Add and remove configs specified by the variant.
  default_common_binary_configs += toolchain_variant.configs
  default_common_binary_configs -= toolchain_variant.remove_common_configs

  default_shared_library_configs = default_common_binary_configs + [
                                     "//build/config:shared_library_config",
                                     "//build/config:symbol_no_undefined",
                                   ]
  default_shared_library_configs -= toolchain_variant.remove_shared_configs

  default_executable_configs = default_common_binary_configs + [
                                 "//build/config:executable_config",
                                 "//build/config:default_libs",
                               ]
  default_executable_deps = []

  # These configs are added here so that they can later be removed from default
  # configs for targets which do not need them. This cannot be done when the
  # configs are added transitively.
  if (current_os == "fuchsia") {
    default_executable_configs += [ "//build/config/fuchsia:fdio_config" ]

    # TODO(fxbug.dev/57585): Enable this for shared and (non-rlib) static libraries as well.
    default_executable_configs +=
        [ "//build/config/fuchsia:dynamic_rust_standard_library" ]

    default_executable_deps +=
        [ "//build/config/fuchsia:maybe_scudo_default_options" ]
  }

  if (toolchain_variant.is_pic_default) {
    default_common_binary_configs += [ "//build/config:shared_library_config" ]
  }
} else {
  # This list is adapted from the `standard_configs` list defined in
  # //zircon/public/gn/config/standard.gni
  #
  # IMPORTANT: Some of the configs below are simple redirections to equivalent
  # configs in //build/config/BUILD.gn, but are used to ensure that the order
  # in the list below matches exactly that of the Zircon build. This ensures
  # that build commands are identical between the Fuchsia and Zircon builds,
  # as verified by //zircon/public/canaries/compare_toolchains.py.
  #
  # TODO(fxbug.dev/60410): After build unification completes, emove the
  # intermediate configs.
  #
  default_common_binary_configs += [
    "//build/config/zircon:compiler",
    "//build/config/zircon:language",
    "//build/config/zircon:machine",
    "//build/config/zircon:relative_paths",
    "//build/config/zircon:assert_level",
    "//build/config/zircon:default_optimize",
    "//build/config/zircon:default_debuginfo",
    "//build/config/zircon:default_warnings",
    "//build/config/zircon:default_icf",
    "//build/config/zircon:default_include_dirs",
    "//build/config/zircon:default_frame_pointers",
    "//build/config/zircon:default_linker_gc",
    "//build/config/zircon:default_template_backtrace_limit",
    "//build/config/zircon:no_exceptions",
    "//build/config/zircon:no_rtti",
    "//build/config/zircon:thread_safety_annotations",
    "//build/config/zircon:warn-implicit-fallthrough",
    "//build/config/zircon:visibility_hidden",
    "//build/config/zircon:auto_var_init",
    "//build/config/zircon:werror",
  ]

  default_shared_library_configs = default_common_binary_configs
  if (!toolchain_variant.is_pic_default) {
    default_shared_library_configs += [
      "//build/config/zircon:shared_library_config",
      "//build/config/zircon:no_undefined_symbols",
    ]
  }

  # Fuzzing and sanitizing variants have remove_common_configs entries that point
  # to //build/config:foo, and need to be translated into //build/config/zircon:foo
  # until build unification completes and the latter can be removed.
  # TODO(fxbug.dev/60410): Remove this after build unification.
  _remove_common_configs = toolchain_variant.remove_common_configs
  foreach(_config,
          [
            "icf",
            "no_rtti",
          ]) {
    _config_label = "//build/config:" + _config
    if (_remove_common_configs + [ _config_label ] - [ _config_label ] !=
        _remove_common_configs) {
      _remove_common_configs -= [ _config_label ]
      _remove_common_configs += [ "//build/config/zircon:" + _config ]
    }
  }

  # To the same for remove_shared_configs
  # TODO(fxbug.dev/60410): Remove this after build unification.
  _remove_shared_configs = toolchain_variant.remove_shared_configs
  foreach(_config, [ "symbol_no_undefined" ]) {
    _config_label = "//build/config:" + _config
    if (_remove_shared_configs + [ _config_label ] - [ _config_label ] !=
        _remove_shared_configs) {
      _remove_shared_configs -= [ _config_label ]
      _remove_shared_configs += [ "//build/config/zircon:" + _config ]
    }
  }

  # NOTE: Contrary to the Fuchsia build, we start by removing common configs
  # then adding new ones. This is necessary because some Zircon kernel
  # toolchains want to move certain configs to the end of the list to ensure
  # that kernel-provided ones are listed first.

  default_common_binary_configs -= _remove_common_configs
  default_common_binary_configs += toolchain_variant.configs

  default_shared_library_configs -= _remove_shared_configs
  default_shared_library_configs += toolchain_variant.configs

  default_executable_configs = default_common_binary_configs
  default_executable_deps = []
}

# Rust proc macros don't support (Thin)LTO, so always remove it.
default_rust_proc_macro_configs = default_shared_library_configs + [
                                    "//build/config/lto",
                                    "//build/config/lto:thinlto",
                                    "//build/config/lto:default",
                                  ] -
                                  [
                                    "//build/config/lto",
                                    "//build/config/lto:thinlto",
                                    "//build/config/lto:default",
                                  ]

# Apply that default list to the binary target types.
set_defaults("source_set") {
  configs = default_common_binary_configs
}

set_defaults("static_library") {
  configs = default_common_binary_configs
}

set_defaults("shared_library") {
  configs = default_shared_library_configs
}

set_defaults("rust_library") {
  configs = default_common_binary_configs
}

set_defaults("rust_proc_macro") {
  configs = default_rust_proc_macro_configs
}

set_defaults("loadable_module") {
  configs = default_shared_library_configs
}
set_defaults("executable") {
  configs = default_executable_configs
}

# Rustc wrapper defaults
set_defaults("rustc_binary") {
  configs = default_executable_configs
}

set_defaults("rustc_binary_sdk") {
  configs = default_executable_configs
}

set_defaults("rustc_test") {
  configs = default_executable_configs
}

set_defaults("rustc_library") {
  configs = default_common_binary_configs
}

set_defaults("rustc_wasm_library") {
  configs = default_shared_library_configs
}

set_defaults("rustc_cdylib") {
  configs = default_shared_library_configs
}
set_defaults("rustc_dylib") {
  configs = default_shared_library_configs
}

set_defaults("rustc_macro") {
  configs = default_shared_library_configs
}

set_defaults("rustc_staticlib") {
  configs = default_common_binary_configs
}

# This wraps the GN built-in shared_library() target and adds a few more features:
#
# - Redirecting from the current toolchain to its shared-library-compatible
#   companion.
#
#   On ELF systems, a toolchain like //toolchain:fuchsia_x64 may have a
#   companion/secondary toolchain, like //toolchain:fuchsia_x64-shared, which
#   will be used to build shared_library() targets and their dependencies.
#
#   This is useful because ELF requires the machine code in shared objects to
#   be compiled and linked with the `-fPIC` flag. This however generates a kind
#   of relocatable code that is slower and larger.
#
#   For performance reason, it is best to build executable() targets, and their
#   static dependencies, in a non-PIC toolchain, while using a PIC-enabled one
#   for shared_library() targets they depend on.
#
#   Note that these companion toolchains are named with a -shared suffix,
#   applied to a "base" toolchain name. This also applies to variant toolchains,
#   i.e. //toolchain:foo-asan-shared would be the companion for
#   //toolchain:foo-asan, which is itself a variant of //toolchain:foo.
#
#   This templates detect when a shared_library() target is being built in a
#   base toolchain, and in this case, it will create a redirection target to the
#   same target in the companion toolchain. This is logically equivalent to:
#
#      if (_in_base_toolchain) {
#        group("mylib") {
#          public_deps = [ ":mylib(//toolchain:foo-shared" ]
#        }
#      } else {   # in -shared toolchain
#        shared_library("mylib") {
#          ....
#        }
#     }
#
#   Note that not all toolchains need a companion toolchain though (e.g. those
#   for non-ELF systems, or even some Zircon-specific ones).
#
# - If not specified by the caller, will use `root_out_dir` as the default output
#   directory. So building '//some/dir:mylib(//toolchain:tc)' will build
#   `${BUILD_DIR}/tc-shared/libmylib.so` instead of
#   `${BUILD_DIR}/tc/obj/some/dir/libmylib.so` as the built-in shared_library()
#   would. Notice the `tc-shared` sub-directory, instead of `tc` due to the
#   companion toolchain.
#
# - Builds both the unstripped and stripped version of the library. For example
#   `//some/dir:mylib(//toolchain:tc)` will generate both:
#
#     `${BUILD_DIR}/tc/libmylib.so`
#     `${BUILD_DIR}/tc/lib.unstripped/libmylib.so`
#
#   As a special case, when built with a Zircon-specific toolchain, the unstripped
#   library will be `${BUILD_DIR}/tc/libmylib.so.debug` instead. The `.debug` prefix
#   simply means that the library contains debug symbols.
#
# - Add an entry for the library to the `binaries.json` build API file.
#
# - Use metadata to add a distribution_manifest() entry that would install the
#   stripped shared library binary to `lib/$output_name`, or
#   `lib/<variant>/$output_name` if this is being built in a variant toolchain
#   instance.
#
# - Add metadata entry for link_output_rspfile(). See its documentation for details.
#
# This takes the same arguments as the built-in shared_library(). as well as:
#
#   install_name (optional)
#     [string] An alternative installation name for the library. This should only
#     be used by the C library that needs to be installed as `ld.so.1` instead of
#     `libc.so`.
#
if (toolchain_variant.with_shared || toolchain_variant.is_pic_default) {
  if (!toolchain_variant.is_pic_default) {
    # In the main toolchain, shared_library just redirects to the same
    # target in the -shared toolchain.
    template("shared_library") {
      group(target_name) {
        public_deps = [ ":$target_name(${current_toolchain}-shared)" ]
        forward_variables_from(invoker,
                               [
                                 "testonly",
                                 "visibility",
                               ])
      }
      not_needed(invoker, "*")
    }
  } else {
    # In the -shared toolchain, shared_library is just its normal self,
    # but if the invoker constrained the visibility, we must make sure
    # the dependency from the main toolchain is still allowed.
    template("shared_library") {
      shared_library(target_name) {
        # Save the target name here as it could be overridden by the calls
        # to forward_variables_from below.
        original_target_name = target_name

        # Explicitly forward visibility, implicitly forward everything
        # else.  Forwarding "*" doesn't recurse into nested scopes (to
        # avoid copying all globals into each template invocation), so
        # won't pick up file-scoped variables.  Normally this isn't too
        # bad, but visibility is commonly defined at the file scope.
        # Explicitly forwarding visibility and then excluding it from the
        # "*" set works around this problem.  See http://crbug.com/594610
        # for rationale on why this GN behavior is not considered a bug.
        forward_variables_from(invoker, [ "visibility" ])
        forward_variables_from(invoker,
                               "*",
                               [
                                 "metadata",
                                 "visibility",
                               ])

        # Restore the original target name.
        target_name = original_target_name

        if (defined(visibility)) {
          visibility += [ ":$target_name" ]
        }

        if (!defined(output_dir)) {
          output_dir = root_out_dir
        }
        if (!defined(output_name)) {
          output_name = target_name
        }

        # Remove any "lib" prefix - this matches GN's behavior.
        _prefixless = string_replace("###$output_name", "###lib", "")
        if (_prefixless != "###$output_name") {
          output_name = _prefixless
        }
        if (!defined(output_extension)) {
          if (current_os == "mac") {
            output_extension = "dylib"
          } else if (current_os == "win") {
            output_extension = "dll"
          } else {
            output_extension = "so"
          }
        }

        output_file_name = "lib$output_name"
        if (output_extension != "") {
          output_file_name += ".$output_extension"
        }
        output_file = "$output_dir/$output_file_name"
        rebased_output_file = rebase_path(output_file, root_build_dir)

        install_name = output_file_name
        if (defined(invoker.install_name)) {
          install_name = invoker.install_name
        }

        # TODO(fxbug.dev/54322): Zircon toolchains must use a .debug suffix for non-stripped
        # shared libraries, instead of putting them into exe.unstripped. This can be
        # changed after build unification completes.
        if (zircon_toolchain != false) {
          link_output_file = output_file + zircon_toolchain.link_output_suffix
        } else {
          link_output_file = "$output_dir/lib.unstripped/$output_file_name"
        }

        # Note: the manifest-related metadata is added to the builder target as
        # some targets (e.g. drivers) depend on it directly in the builder
        # toolchain.
        variant_dir = ""
        if (toolchain_variant.instrumented) {
          variant_dir =
              string_replace(toolchain_variant.name, "-fuzzer", "") + "/"
        }
        metadata = {
          binaries = []

          # Allow metadata to be specified to shared_library instances
          # that come from a PIC-friendly toolchain too. This is required
          # for the Zircon VDSO and C library.
          if (defined(invoker.metadata)) {
            forward_variables_from(invoker.metadata, "*")
          }

          # Used by link_output_rspfile(), see its documentation for details
          link_output_path = [ rebase_path(link_output_file, root_build_dir) ]
          link_output_barrier = []

          # Used by the distribution_manifest template.
          if (!defined(distribution_entries)) {
            distribution_entries = [
              {
                source = rebased_output_file
                destination = "lib/${variant_dir}$install_name"
                label = get_label_info(":$target_name", "label_with_toolchain")
              },
            ]
          } else {
            not_needed([
                         "install_name",
                         "variant_dir",
                       ])
          }

          # Used by the //:binaries target.
          binaries += [
            {
              type = "shared_library"
              label = get_label_info(":$target_name", "label_with_toolchain")
              cpu = current_cpu
              os = current_os
              debug = rebase_path(link_output_file, root_build_dir)
              dist = rebased_output_file
              if (current_os != "mac" && current_os != "win") {
                elf_build_id = rebased_output_file + ".build-id.stamp"
              }
              if (output_breakpad_syms && current_os == "fuchsia") {
                breakpad = rebased_output_file + ".sym"
              }
            },
          ]
        }

        if (is_fuchsia) {
          if (!defined(deps)) {
            deps = []
          }

          if (zircon_toolchain == false) {
            deps += [ "//zircon/public/sysroot:cpp_binary_deps" ]
          }

          # Add zircon dependency for the profile variant. TODO(fxbug.dev/61522): Remove this.
          if (toolchain_variant.tags + [ "profile" ] - [ "profile" ] !=
              toolchain_variant.tags) {
            deps += [ "//src/zircon/lib/zircon" ]
          }
          if (!defined(data_deps)) {
            data_deps = []
          }
          if (zircon_toolchain == false) {
            should_add_shared_cpp_runtime = true
            if (defined(configs)) {
              # Do not add runtime dependencies if compiling statically.
              static_cpp_configs = [
                "//build/config/fuchsia:static_cpp_standard_library",
                "//build/config/zircon:static-libc++",
              ]
              if (configs + static_cpp_configs - static_cpp_configs !=
                  configs) {
                should_add_shared_cpp_runtime = false
              }
            }
            if (should_add_shared_cpp_runtime) {
              data_deps += [ "//build/toolchain/runtime:shared-libc++-deps" ]
            } else {
              # Even when compiling statically, some runtime dependencies might
              # be needed when performing instrumented builds, because the
              # compiler-generated machine code will contain imports to
              # instrumentation-runtime-specific libraries.
              data_deps += [ "//build/toolchain/runtime:static-libc++-deps" ]
            }
          }
        }
      }
    }
  }
}

# This is the basic "asan" variant.  Others start with this and modify.
# See `known_variants` (below) for the meaning of fields in this scope.
_asan_variant = {
  configs = [ "//build/config/sanitizers:asan" ]
  if (host_os != "fuchsia") {
    host_only = {
      # On most systems (not Fuchsia), the sanitizer runtimes are normally
      # linked statically and so `-shared` links do not include them.
      # Using `-shared --no-undefined` with sanitized code will get
      # undefined references for the sanitizer runtime calls generated by
      # the compiler.  It shouldn't do much harm, since the non-variant
      # builds will catch the real undefined reference bugs.
      remove_shared_configs = [ "//build/config:symbol_no_undefined" ]
    }
  }
  toolchain_args = {
  }
  tags = [
    "asan",
    "instrumentation-runtime",
    "instrumented",
    "lsan",
    "replaces-allocator",
    "kernel-excluded",
  ]
}

# This is the "kasan" variant that only applies to the kernel. This is
# very similar to the "asan" one except for the use of no_safestack
# config, and the fact that it must use the 'kernel-only' tag, instead
# of 'kernel-excluded'.
_kasan_variant = {
  forward_variables_from(_asan_variant, "*")
  configs += [ "//build/config/zircon:no_safestack" ]
  tags -= [ "kernel-excluded" ]
  tags += [ "kernel-only" ]
}

# When fuzzing with ASan, we configure it to be ClusterFuzz-friendly
# (https://google.github.io/clusterfuzz).
_asan_fuzzer_toolchain_args = {
  forward_variables_from(_asan_variant.toolchain_args, "*")
  asan_default_options = string_join(
          ":",
          [
            # https://github.com/google/sanitizers/wiki/SanitizerCommonFlags
            "alloc_dealloc_mismatch=0",
            "check_malloc_usable_size=0",
            "detect_odr_violation=0",
            "max_uar_stack_size_log=16",
            "print_scariness=1",

            # https://github.com/google/sanitizers/wiki/AddressSanitizerFlags
            "allocator_may_return_null=1",
            "detect_leaks=0",
            "detect_stack_use_after_return=1",
            "malloc_context_size=128",
            "print_summary=1",
            "print_suppressions=0",
            "strict_memcmp=0",
            "symbolize=0",
          ])
}

# Disable identical code folding in fuzzer toolchain variants, since accurate
# stack traces are most useful under fuzzing than reduced binary sizes.
_fuzzer_remove_common_configs = [ "//build/config:icf" ]

# Disable warnings about symbols that will be provided by compiler runtimes.
_fuzzer_remove_shared_configs = [ "//build/config:symbol_no_undefined" ]

declare_args() {
  # List of variants that will form the basis for variant toolchains.
  # To make use of a variant, set [`select_variant`](#select_variant).
  #
  # Normally this is not set as a build argument, but it serves to
  # document the available set of variants.
  # See also [`universal_variants`](#universal_variants).
  # Only set this to remove all the default variants here.
  # To add more, set [`extra_variants`](#extra_variants) instead.
  #
  # Each element of the list is one variant, which is a scope defining:
  #
  #   `configs` (optional)
  #       [list of labels] Each label names a config that will be
  #       automatically used by every target built in this variant.
  #       For each config `${label}`, there must also be a target
  #       `${label}_deps`, which each target built in this variant will
  #       automatically depend on.  The `variant()` template is the
  #       recommended way to define a config and its `_deps` target at
  #       the same time.
  #
  #   `remove_common_configs` (optional)
  #   `remove_shared_configs` (optional)
  #       [list of labels] This list will be removed (with `-=`) from
  #       the `default_common_binary_configs` list (or the
  #       `default_shared_library_configs` list, respectively) after
  #       all other defaults (and this variant's configs) have been
  #       added.
  #
  #   `deps` (optional)
  #       [list of labels] Added to the deps of every target linked in
  #       this variant (as well as the automatic `${label}_deps` for
  #       each label in configs).
  #
  #   `name` (required if configs is omitted)
  #       [string] Name of the variant as used in
  #       [`select_variant`](#select_variant) elements' `variant` fields.
  #       It's a good idea to make it something concise and meaningful when
  #       seen as e.g. part of a directory name under `$root_build_dir`.
  #       If name is omitted, configs must be nonempty and the simple names
  #       (not the full label, just the part after all `/`s and `:`s) of these
  #       configs will be used in toolchain names (each prefixed by a "-"),
  #       so the list of config names forming each variant must be unique
  #       among the lists in `known_variants + extra_variants`.
  #
  #   `tags` (optional)
  #       [list of strings] A list of liberal strings describing properties
  #       of the toolchain instances created from this variant scope. See
  #       //build/toolchain/variant_tags.gni for the list of available
  #       values and their meaning.
  #
  #   `toolchain_args` (optional)
  #       [scope] Each variable defined in this scope overrides a
  #       build argument in the toolchain context of this variant.
  #
  #   `host_only` (optional)
  #   `target_only` (optional)
  #       [scope] This scope can contain any of the fields above.
  #       These values are used only for host or target, respectively.
  #       Any fields included here should not also be in the outer scope.
  #
  known_variants = [
    {
      configs = [ "//build/config/lto" ]
      tags = [ "lto" ]
    },
    {
      configs = [ "//build/config/lto:thinlto" ]
      tags = [ "lto" ]
    },

    {
      configs = [ "//build/config/profile" ]
      tags = [
        "instrumented",
        "profile",

        # TODO(fxbug.dev/27321): The instrumentation metadata sections are not put
        # into section groups properly under -ffunction-sections.  This
        # means that links (like the x86 kernel's) that rely for their
        # correctness on --gc-sections pruning dead code with dangling
        # references won't work.
        "breaks-gc-sections",
      ]
    },

    {
      configs = [ "//build/config/sanitizers:ubsan" ]

      # The vptr instrumentation requires RTTI.  If -fno-rtti is passed then
      # this checking is implicitly disabled.  However, another translation
      # unit built without -fno-rtti will have the checking enabled.  The
      # -fno-rtti vtables are not compatible with the checking at runtime, so a
      # vtable from a -fno-rtti TU used by code from a -frtti TU gets false
      # positive failures.  Since the vtables are emitted in multiple TUs in
      # COMDAT and one implementation chosen randomly at link time, there's no
      # way to be sure the checking code requiring RTTI uses its own
      # RTTI-enabled vtables rather than other non-RTTI vtables.  So just let
      # RTTI be enabled everywhere, and then get the vptr checking everywhere
      # too.
      remove_common_configs = [ "//build/config:no_rtti" ]
      tags = [
        "instrumented",
        "instrumentation-runtime",
        "kernel-excluded",
        "ubsan",
      ]
    },
    {
      configs = [
        "//build/config/sanitizers:ubsan",
        "//build/config/sanitizers:sancov",
      ]
      remove_common_configs = [ "//build/config:no_rtti" ]  # See above.
      tags = [
        "instrumented",
        "instrumentation-runtime",
        "kernel-excluded",
        "sancov",
        "ubsan",
      ]
    },

    _asan_variant,
    {
      forward_variables_from(_asan_variant, "*")
      configs += [ "//build/config/sanitizers:ubsan" ]
      remove_common_configs = [ "//build/config:no_rtti" ]  # See above.
      tags += [ "ubsan" ]
    },
    {
      forward_variables_from(_asan_variant, "*")
      configs += [ "//build/config/sanitizers:sancov" ]
      tags += [ "sancov" ]
    },

    # The 'kasan' variant is the same as the 'asan' one except for the
    # fact that it has the 'kernel-only' tag instead of 'kernel-excluded'.
    {
      name = "kasan"
      forward_variables_from(_kasan_variant, "*")
    },

    # Same for 'kasan-sancov' that mimics 'asan-sancov'.
    {
      name = "kasan-sancov"
      forward_variables_from(_kasan_variant, "*")
      configs += [ "//build/config/sanitizers:sancov" ]
      tags += [ "sancov" ]
    },

    # Fuzzer variants for various sanitizers.
    {
      name = "asan-fuzzer"
      forward_variables_from(_asan_variant, "*", [ "toolchain_args" ])
      toolchain_args = _asan_fuzzer_toolchain_args
      configs += [
        "//build/config/fuzzer",
        "//build/config/sanitizers:rust-asan",
      ]
      configs += _fuzzer_remove_common_configs  # Ensure present when removing.
      remove_common_configs = _fuzzer_remove_common_configs
      remove_shared_configs = _fuzzer_remove_shared_configs
      tags += [ "fuzzer" ]
    },
    {
      name = "ubsan-fuzzer"
      configs = [
        "//build/config/fuzzer",
        "//build/config/sanitizers:ubsan",
      ]
      configs += _fuzzer_remove_common_configs  # Ensure present when removing.
      remove_common_configs = _fuzzer_remove_common_configs
      remove_shared_configs = _fuzzer_remove_shared_configs
      remove_common_configs += [ "//build/config:no_rtti" ]  # See above.
      tags = [
        "fuzzer",
        "instrumented",
        "instrumentation-runtime",
        "ubsan",
      ]
    },

    # A variant to use GCC instead of Clang to build artefacts. This can only
    # be used with Zircon-specific toolchains.
    {
      name = "gcc"
      tags = [ "gcc" ]
    },
  ]

  # Additional variant toolchain configs to support.
  # This is just added to [`known_variants`](#known_variants).
  extra_variants = []

  # List of "universal" variants, in addition to
  # [`known_variants`](#known_variants).  Normally this is not set as a
  # build argument, but it serves to document the available set of
  # variants.  These are treated just like
  # [`known_variants`](#known_variants), but as well as being variants by
  # themselves, these are also combined with each of
  # [`known_variants`](#known_variants) to form additional variants,
  # e.g. "asan-debug" or "ubsan-sancov-release".
  universal_variants = []

  # Only one of "debug" and "release" is really available as a universal
  # variant in any given build (depending on the global setting of
  # `is_debug`).  But this gets evaluated separately in every toolchain, so
  # e.g. in the "release" toolchain the sense of `if (is_debug)` tests is
  # inverted and this would list only "debug" as an available variant.  The
  # selection logic in `variant_target()` can only work if the value of
  # `universal_variants` it sees includes the current variant.
  if (is_debug) {
    universal_variants += [
      {
        name = "release"
        configs = []
        toolchain_args = {
          is_debug = false
        }
      },
    ]
  } else {
    universal_variants += [
      {
        name = "debug"
        configs = []
        toolchain_args = {
          is_debug = true
        }
      },
    ]
  }

  # List of short names for commonly-used variant selectors.  Normally this
  # is not set as a build argument, but it serves to document the available
  # set of short-cut names for variant selectors.  Each element of this list
  # is a scope where `.name` is the short name and `.select_variant` is a
  # a list that can be spliced into [`select_variant`](#select_variant).
  select_variant_shortcuts = [
    {
      name = "host_asan"
      select_variant = []
      select_variant = [
        {
          variant = "asan"
          host = true
        },
      ]
    },
    {
      name = "host_asan-ubsan"
      select_variant = []
      select_variant = [
        {
          variant = "asan-ubsan"
          host = true
        },
      ]
    },

    {
      name = "host_profile"
      select_variant = []
      select_variant = [
        {
          variant = "profile"
          host = true
        },
      ]
    },
  ]
}

# Now elaborate the fixed shortcuts with implicit shortcuts for
# each known variant.  The shortcut is just the name of the variant
# and selects for `host=false`.
_select_variant_shortcuts = select_variant_shortcuts
foreach(variant, known_variants + extra_variants) {
  if (defined(variant.name)) {
    variant = variant.name
  } else {
    # This is how GN spells "let".
    foreach(configs, [ variant.configs ]) {
      variant = ""
      foreach(config, configs) {
        config = get_label_info(config, "name")
        if (variant == "") {
          variant = config
        } else {
          variant += "-$config"
        }
      }
    }
  }
  _select_variant_shortcuts += [
    {
      name = variant
      select_variant = []
      select_variant = [
        {
          variant = name
          host = false
        },
      ]
    },
  ]
  foreach(universal_variant, universal_variants) {
    _select_variant_shortcuts += [
      {
        name = "${variant}-${universal_variant.name}"
        select_variant = []
        select_variant = [
          {
            variant = name
            host = false
          },
        ]
      },
    ]
  }
}
foreach(variant, universal_variants) {
  variant = variant.name
  _select_variant_shortcuts += [
    {
      name = variant
      select_variant = []
      select_variant = [
        {
          variant = name
          host = false
        },
      ]
    },
  ]
}

declare_args() {
  # List of "selectors" to request variant builds of certain targets.
  # Each selector specifies matching criteria and a chosen variant.
  # The first selector in the list to match a given target determines
  # which variant is used for that target.
  #
  # Each selector is either a string or a scope.  A shortcut selector is
  # a string; it gets expanded to a full selector.  A full selector is a
  # scope, described below.
  #
  # A string selector can match a name in
  # [`select_variant_shortcuts`](#select_variant_shortcuts).  If it's not a
  # specific shortcut listed there, then it can be the name of any variant
  # described in [`known_variants`](#known_variants) and
  # [`universal_variants`](#universal_variants) (and combinations thereof).
  # A `selector` that's a simple variant name selects for every binary
  # built in the target toolchain: `{ host=false variant=selector }`.
  #
  # If a string selector contains a slash, then it's `"shortcut/filename"`
  # and selects only the binary in the target toolchain whose `output_name`
  # matches `"filename"`, i.e. it adds `output_name=["filename"]` to each
  # selector scope that the shortcut's name alone would yield.
  #
  # The scope that forms a full selector defines some of these:
  #
  #     variant (required)
  #         [string or `false`] The variant that applies if this selector
  #         matches.  This can be `false` to choose no variant, or a string
  #         that names the variant.  See
  #         [`known_variants`](#known_variants) and
  #         [`universal_variants`](#universal_variants).
  #
  # The rest below are matching criteria.  All are optional.
  # The selector matches if and only if all of its criteria match.
  # If none of these is defined, then the selector always matches.
  #
  # The first selector in the list to match wins and then the rest of
  # the list is ignored.  To construct more complex rules, use a blocklist
  # selector with `variant=false` before a catch-all default variant, or
  # a list of specific variants before a catch-all false variant.
  #
  # Each "[strings]" criterion is a list of strings, and the criterion
  # is satisfied if any of the strings matches against the candidate string.
  #
  #     host
  #         [boolean] If true, the selector matches in the host toolchain.
  #         If false, the selector matches in the target toolchain.
  #
  #     testonly
  #         [boolean] If true, the selector matches targets with testonly=true.
  #         If false, the selector matches in targets without testonly=true.
  #
  #     target_type
  #         [strings]: `"executable"`, `"loadable_module"`, or `"driver_module"`
  #
  #     output_name
  #         [strings]: target's `output_name` (default: its `target name`)
  #
  #     label
  #         [strings]: target's full label with `:` (without toolchain suffix)
  #
  #     name
  #         [strings]: target's simple name (label after last `/` or `:`)
  #
  #     dir
  #         [strings]: target's label directory (`//dir` for `//dir:name`).
  select_variant = []

  # *This should never be set as a build argument.*
  # It exists only to be set in `toolchain_args`.
  # See //build/toolchain/clang_toolchain.gni for details.
  select_variant_canonical = []

  # *These should never be set as a build argument.*
  # It will be set below and passed to other toolchains through toolchain_args
  # (see variant_toolchain.gni).
  all_toolchain_variants = []
}

# Very unfortunately, GN nevers sets `current_toolchain` when executing
# BUILDCONFIG.gn, so the logic below is used to detect when this file
# is executed in the context of the default toolchain.
#
# It relies on any non-default toolchain to set toolchain_variant.base to
# a value different from its default value. This should be enforce by any
# toolchain() defining template, i.e. basic_toolchain(), clang_toolchain()
# and zircon_toolchain().
in_default_toolchain =
    toolchain_variant.base == target_toolchain && current_cpu == target_cpu &&
    current_os == target_os && toolchain_variant.name == "" &&
    !toolchain_variant.is_pic_default

# Do this only once, in the default toolchain context.    Then
# clang_toolchain_suite will just pass the results through to every
# other toolchain via toolchain_args so the work is not repeated.
if (in_default_toolchain) {
  assert(select_variant_canonical == [],
         "`select_variant_canonical` cannot be set as a build argument")

  foreach(selector, select_variant) {
    if (selector != "$selector") {
      # It's a scope, not a string.  Just use it as is.
      select_variant_canonical += [ selector ]
    } else if (selector == "clang") {
      # Ignore these as special cases.  They're just here to be
      # passed through in zircon_args.
    } else {
      # It's a string, not a scope.  Expand the shortcut.
      # If there is a slash, this is "shortcut/output_name".
      # If not, it's just "shortcut".
      foreach(file, [ get_path_info(selector, "file") ]) {
        if (file == selector) {
          file = ""
        } else {
          selector = get_path_info(selector, "dir")
        }
        foreach(shortcut, _select_variant_shortcuts) {
          # file=true stands in for "break".
          if (file != true && selector == shortcut.name) {
            # Found the matching shortcut.
            if (file == "") {
              # It applies to everything, so just splice it in directly.
              select_variant_canonical += shortcut.select_variant
            } else {
              # Add each of the shortcut's clauses amended with the
              # output_name constraint.
              foreach(clause, shortcut.select_variant) {
                select_variant_canonical += [
                  {
                    forward_variables_from(clause, "*")
                    output_name = [ file ]
                  },
                ]
              }
            }
            file = true
          }
        }
        assert(file == true,
               "unknown shortcut `${selector}` used in `select_variant`")
      }
    }
  }

  # Expand the list of all variants, based on the values of known_variants,
  # extra_variants, and universal_variants. Note that the items in the list
  # are not in their full canonical format because they don't have a 'base'
  # key, and the 'host_only' and 'target_only' keys are not expanded yet.
  # Full expansion will happen in variant_toolchain_suite().
  all_toolchain_variants = []
  foreach(variant, [ false ] + known_variants + extra_variants) {
    all_toolchain_variants += [
      {
        configs = []
        prefix_configs = []
        remove_common_configs = []
        remove_shared_configs = []
        deps = []
        tags = []
        if (variant == false) {
          name = ""
          suffix = ""
        } else {
          forward_variables_from(variant, "*")
          if (!defined(name)) {
            # We cannot expand host_only/target_only yet, but we can verify that
            # these scopes should not include any "configs" keys, to ensure the
            # future expansion cannot change the variant's name computed from
            # the list of configs.
            if (defined(host_only)) {
              assert(
                  !defined(host_only.configs),
                  "The host_only scope of a name-less variant cannot contain 'configs' entries.")
            }
            if (defined(target_only)) {
              assert(
                  !defined(target_only.configs),
                  "The target_only scope of a name-less variant cannot contain 'configs' entries.")
            }
            name = ""
            assert(configs != [],
                   "variant with no name must include nonempty configs")
            foreach(config, configs) {
              if (name != "") {
                name += "-"
              }
              name += get_label_info(config, "name")
            }
          }
          suffix = "-$name"
        }
      },
    ]
  }

  # Now elaborate the list with all the universal variant combinations.
  # Each universal variant becomes its own standalone variant when
  # combined with the null variant.
  foreach(variant, all_toolchain_variants) {
    foreach(universal_variant, universal_variants) {
      all_toolchain_variants += [
        {
          forward_variables_from(variant, "*", [ "toolchain_args" ])
          toolchain_args = {
            if (defined(variant.toolchain_args)) {
              forward_variables_from(variant.toolchain_args, "*")
            }
            if (defined(universal_variant.toolchain_args)) {
              forward_variables_from(universal_variant.toolchain_args, "*")
            }
          }
          if (name == "") {
            name = universal_variant.name
          } else {
            name += "-${universal_variant.name}"
          }
          suffix += "-${universal_variant.name}"
          configs += universal_variant.configs
          if (defined(universal_variant.remove_common_configs)) {
            remove_common_configs += universal_variant.remove_common_configs
          }
          if (defined(universal_variant.remove_shared_configs)) {
            remove_shared_configs += universal_variant.remove_shared_configs
          }
          if (defined(universal_variant.deps)) {
            deps += universal_variant.deps
          }
        },
      ]
    }
  }

  # Insert a 'variant_tags' field in each selector item that corresponds to
  # the list of tags from the variant the selector points to.
  foreach(_variant_selectors, [ [] ]) {
    foreach(selector, select_variant_canonical) {
      _variant_selectors += [
        {
          forward_variables_from(selector, "*")
          variant_tags = []
          foreach(selected_tags, [ false ]) {
            foreach(variant, all_toolchain_variants) {
              if (selector.variant == variant.name) {
                selected_tags = variant.tags
              }
            }
            if (selected_tags != false) {
              variant_tags = selected_tags
            }
          }
        },
      ]
    }
    select_variant_canonical = []
    select_variant_canonical = _variant_selectors
  }
}

# This template is used internally by the Fuchsia build system to perform variant
# toolchain selection for 'final' linkable targets, i.e. executable(), loadable_module(),
# but not shared_library().
#
# Its purpose is to redirect to a specific GN toolchain() instance based on the current
# variant selectors list (see documentation for `select_variant` above). For example,
# if building the //foo:bar target in the //toolchain:zoo toolchain which supports an
# Address-sanitizer variant, among others:
#
# - If no variant is selected by the developer, then this will just build
#   //foo:bar(//toolchain:zoo) directly. Let's assume this generates an executable
#   ${BUILD_DIR}/zoo/bar.
#
# - If the 'asan' variant is selected (e.g. `select_variant = [ 'asan' ]`), then this will
#   instead build //foo:bar(//toolchain:zoo-asan), which will generate
#   ${BUILD_DIR}/zoo-asan/bar. Additionally, a copy() rule will be used to copy this
#   result to ${BUILD_DIR}/zoo/bar.
#
#   This is important because other build rules need to find the generated binary at its
#   original location, even if it was really built in a variant toolchain.
#
# Arguments are the same as the one passed to the final target type, plus:
#
#  exclude_toolchain_tags (optional)
#    [strings] An optional list of toolchain or variant tags that must be excluded from
#    this redirection. This is useful if, for some reason, a specific target doesn't want
#    to be built with a specific set of variants or toolchains.
#
#  variant_selector_target_type (optional)
#    [string] A target type name that is compared with a variant selector's optional
#    `target_type` list of target type names (see `select_variant` documentation above).
#    If not defined, this defaults to the target type carried through `target_name`.
#
#  _variant_shared (required)
#    [boolean] If true, this will also redirect to the -shlib companion toolchain
#    associated with the current one. In practice, this should only be true for
#    loadable_module(), or equivalent, which require to be built in that toolchain.
#
#    In the examples above, this would redirect to //foo:bar(//toolchain:zoo-shlib)
#    and //foo:bar(//toolchain:zoo-asan-shlib) respectively.
#
#    Note that shared_library() does not use variant_target() and does its own
#    redirection to the shlib companion toolchain by itself.
#
# NOTE: This template assumes that `target_name` will be the name of a final target type,
# like "executable", and that invoker.target_name is the name of the real final target that
# needs to be built. In other words, this is suppoed to be called by a wrapper class as
# in the following example:
#
#     template("my_executable") {
#       variant_target("executable") {
#         forward_variables_from*invoker, "*", ....)
#         ...
#         selector_target_type = "my_executable"
#       }
#     }
#
# NOTE: The Fuchsia build sets the default `output_dir` value for final linkable
# targets to `root_out_dir`.
#
template("variant_target") {
  # NOTE: See technical note above to understand these three definitions.
  target_type = target_name
  target_name = invoker.target_name
  target_invoker = {
    # Explicitly forward visibility, implicitly forward everything else.
    # See comment in template("shared_library") above for details.
    forward_variables_from(invoker, [ "visibility" ])
    forward_variables_from(invoker,
                           "*",
                           [
                             "exclude_toolchain_tags",
                             "target_name",
                             "variant_selector_target_type",
                             "visibility",
                           ])

    if (!defined(output_name)) {
      output_name = target_name
    }
  }

  # target_type is the real GN target type that builds the thing.
  # selector_target_type is the name matched against target_type selectors.
  if (defined(invoker.variant_selector_target_type)) {
    selector_target_type = invoker.variant_selector_target_type
  } else {
    selector_target_type = target_type
  }

  target_label = get_label_info(":$target_name", "label_no_toolchain")

  exclude_toolchain_tags = []
  if (defined(invoker.exclude_toolchain_tags)) {
    exclude_toolchain_tags += invoker.exclude_toolchain_tags
  }
  if (defined(toolchain_variant.exclude_variant_tags)) {
    exclude_toolchain_tags += toolchain_variant.exclude_variant_tags
  }

  # These are not actually used in all possible if branches below,
  # so defang GN's extremely sensitive "unused variable" errors.
  not_needed([
               "exclude_toolchain_tags",
               "selector_target_type",
               "target_invoker",
               "target_label",
               "target_type",
             ])

  # IMPORTANT: The computations below are duplicated in several other
  # files. Please keep them in sync, see:
  #   //build/toolchain/variant_shared_library_redirect.gni
  #   //zircon/system/ulib/c/libc_toolchain.gni
  #   //zircon/system/ulib/zircon/vdso_toolchain.gni
  target_variant = false
  if (select_variant_canonical != []) {
    # See if there is a selector that matches this target.
    # IMPORTANT: The selection logic below is replicated in
    # //zircon/system/ulib/c/libc_toolchain.gni due to specific
    # sysroot-related requirements. See comments in this file for
    # more details. ALWAYS KEEP THEM IN SYNC!
    selected = false
    foreach(selector, select_variant_canonical) {
      # The first match wins.
      # GN's loops don't have "break", so do nothing on later iterations.
      if (!selected) {
        # Expand the selector so we don't have to do a lot of defined(...)
        # tests below.
        select = {
        }
        select = {
          target_type = []
          output_name = []
          label = []
          name = []
          dir = []
          forward_variables_from(selector, "*")
        }

        selected = true
        if (selected && defined(selector.host)) {
          # NOTE: Do not use 'current_toolchain == host_toolchain' to verify
          # that the current toolchain is a host one, because this condition
          # will be false when building host_arm64 executables on host_x64.
          # On the other hand, `is_host` is always correct in either host_x64
          # or host_arm64, due to the way it is set above in this file.
          # See https://fxbug.dev/58102 for details.
          selected = is_host == selector.host
        }

        if (selected && defined(selector.testonly)) {
          selected = (defined(target_invoker.testonly) &&
                      target_invoker.testonly) == selector.testonly
        }

        if (selected && select.target_type != []) {
          selected = false
          candidate = selector_target_type
          foreach(try, select.target_type) {
            if (try == candidate) {
              selected = true
            }
          }
        }

        if (selected && select.output_name != []) {
          selected = false
          candidate = target_invoker.output_name
          foreach(try, select.output_name) {
            if (try == candidate) {
              selected = true
            }
          }
        }

        if (selected && select.label != []) {
          selected = false
          candidate = target_label
          foreach(try, select.label) {
            if (try == candidate) {
              selected = true
            }
          }
        }

        if (selected && select.name != []) {
          selected = false
          candidate = get_label_info(target_label, "name")
          foreach(try, select.name) {
            if (try == candidate) {
              selected = true
            }
          }
        }

        if (selected && select.dir != []) {
          selected = false
          candidate = get_label_info(target_label, "dir")
          foreach(try, select.dir) {
            if (try == candidate) {
              selected = true
            }
          }
        }

        if (selected && exclude_toolchain_tags != []) {
          if (exclude_toolchain_tags + select.variant_tags -
              select.variant_tags != exclude_toolchain_tags) {
            selected = false
          }
        }

        if (selected && selector.variant != false) {
          target_variant = "-${selector.variant}"
        }
      }
    }
  }
  if (target_variant == false) {
    target_variant = ""
  }

  builder_toolchain = toolchain_variant.base + target_variant
  if (invoker._variant_shared) {
    builder_toolchain += "-shared"
  }

  if (current_toolchain == builder_toolchain) {
    # This is the toolchain selected to actually build this target.
    target(target_type, target_name) {
      deps = []
      forward_variables_from(target_invoker, "*")
      deps += toolchain_variant.deps
      foreach(
          config,
          toolchain_variant.configs + toolchain_variant.remove_common_configs -
              toolchain_variant.remove_common_configs) {
        # Expand the label so it always has a `:name` part.
        config = get_label_info(config, "label_no_toolchain")
        deps += [ "${config}_deps" ]
      }
      if (defined(visibility)) {
        # Other toolchains will define this target as a group or copy
        # rule that depends on this toolchain's definition.  If the
        # invoker constrained the visibility, make sure those
        # dependencies from other toolchains are still allowed.
        visibility += [ ":${target_name}" ]
      }

      # Depend on runtime libraries provided by the sysroot and the toolchain.
      # This ensures the libraries are packaged up with the output of this
      # target.
      # These dependencies need to be attached here rather than higher up in the
      # dependency tree in order to correctly capture the active toolchain
      # variant.
      if (is_fuchsia) {
        if (!defined(deps)) {
          deps = []
        }
        if (!defined(data_deps)) {
          data_deps = []
        }
        if (zircon_toolchain == false) {
          if (defined(crate_root)) {
            deps += [ "//zircon/public/sysroot:rust_binary_deps" ]
          } else {
            deps += [ "//zircon/public/sysroot:cpp_binary_deps" ]
          }

          # Add dependency to the C runtime startup object file for executables,
          # except if the static-pie-config is used.
          if ((target_type == "executable" || target_type == "test") &&
              configs + [ "//build/config/fuchsia:static-pie-config" ] -
              [ "//build/config/fuchsia:static-pie-config" ] == configs) {
            deps += [ "//zircon/public/sysroot:crt1_deps" ]
          }
        }

        # NOTE: invoker.crate_root will be defined when building a Rust crate
        # instead of a C++ binary.
        if (zircon_toolchain == false) {
          should_add_shared_cpp_runtime = true
          if (defined(configs)) {
            # Do not add runtime dependencies if compiling statically.
            static_cpp_configs = [
              "//build/config/fuchsia:static_cpp_standard_library",
              "//build/config/zircon:static-libc++",
            ]
            if (configs + static_cpp_configs - static_cpp_configs != configs) {
              should_add_shared_cpp_runtime = false
            }
          }
          if (should_add_shared_cpp_runtime) {
            data_deps += [ "//build/toolchain/runtime:shared-libc++-deps" ]
          } else if (!defined(crate_root)) {
            # Even when compiling statically, some runtime dependencies might
            # be needed when performing instrumented builds, because the
            # compiler-generated machine code will contain imports to
            # instrumentation-runtime-specific libraries.
            data_deps += [ "//build/toolchain/runtime:static-libc++-deps" ]
          }
        }
        if (defined(crate_root)) {
          should_add_shared_rust_runtime = true
          dynamic_rust_config =
              [ "//build/config/fuchsia:dynamic_rust_standard_library" ]
          if (!defined(configs) ||
              configs + dynamic_rust_config - dynamic_rust_config == configs) {
            # For rustc, static linking is the default. So we only add a runtime if
            # the dynamic linking config is present.
            should_add_shared_rust_runtime = false
          }
          if (should_add_shared_rust_runtime) {
            data_deps += [ "//build/toolchain/runtime:shared-rust-libstd-deps" ]
          }
        }
      }
    }
  } else if (current_toolchain == shlib_toolchain ||
             builder_toolchain == toolchain_variant.base) {
    # Don't copy from a variant into a -shared toolchain, because nobody
    # looks for an executable or loadable_module there. Don't copy from
    # the base toolchain to a variant, either. Instead, in both cases just
    # forward any deps to the real target.
    group(target_name) {
      forward_variables_from(target_invoker,
                             [
                               "testonly",
                               "visibility",
                             ])
      if (defined(visibility)) {
        visibility += [ ":${target_name}" ]
      }
      deps = [ ":${target_name}(${builder_toolchain})" ]
    }
  } else {
    # When some variant was selected, then this target in all other
    # toolchains is actually just this copy rule.  The target is built in
    # the selected variant toolchain, but then copied to its usual name in
    # $root_out_dir so that things can find it there.
    #
    # Note that copying an executable to another directory this way causes
    # problems if the executable dynamically links against libraries that
    # the dynamic linker expects to find using a filename relative to the
    # executable's location.  Usually that does not matter, because we
    # avoid dynamic linking (for host tools) for reasons like that.  An
    # exception is ASan on Mac, but that is currently disabled due to
    # problems caused by its use of dynamic linking (TODO(fxbug.dev/3166)).
    copy(target_name) {
      forward_variables_from(target_invoker,
                             [
                               "testonly",
                               "visibility",
                             ])
      if (defined(visibility)) {
        visibility += [ ":${target_name}" ]
      }

      deps = [ ":${target_name}(${builder_toolchain})" ]

      full_output_name = target_invoker.output_name
      if (defined(target_invoker.output_extension) &&
          target_invoker.output_extension != "") {
        full_output_name += ".${target_invoker.output_extension}"
      }

      local_out_dir = root_out_dir
      variant_out_dir = get_label_info(deps[0], "root_out_dir")
      if (defined(target_invoker.output_dir)) {
        local_out_dir = target_invoker.output_dir

        # If invoker.output_dir is not root_build_dir, assume it is a
        # sub-directory of root_out_dir, and adjust the source path accordingly
        # (e.g. "<toolchain>/foo" -> "<toolchain>-<variant>/foo").
        if (local_out_dir != root_build_dir) {
          relative_dir =
              rebase_path(local_out_dir, root_out_dir, root_build_dir)
          variant_out_dir = "$variant_out_dir/$relative_dir"
        }
      }

      sources = [ "$variant_out_dir/$full_output_name" ]
      outputs = [ "$local_out_dir/$full_output_name" ]
    }
  }
}

# This wraps the built-in GN executable() template, adding a few more features:
#
# - Perform variant-based toolchain selection using variant_target(). See its
#   documentation for more details.
#
# - The default `output_dir` value is set to `root_out_dir`, which means
#   that building //some/dir:foo(//toolchain:bar) will generate
#   `${BUILD_DIR}/bar/foo` instead of `${BUILD_DIR]/bar/obj/some/dir/bar`.
#
# - This builds both an unstripped executable, and its stripped version,
#   under `${BUILD_DIR}/bar/exe.unstripped/foo` and `${BUILD_DIR}/bar/foo`
#   respectively.
#
#   As a special case, when using a zircon-specific toolchain, the unstripped
#   executable will be `${BUILD_DIR}/bar/foo.debug` instead. The `.debug` suffix
#   simply means the executable contains debug symbol information.
#
# - Misc default dependencies are added to the target depending on the current
#   toolchain and some of the configs that apply to the target (see below for
#   details).
#
# - Metadata is used to add an entry for the executable to the `binaries.json`
#   build API file.
#
# - For executable instances built with host toolchains, metadata is used to add an
#   entry to the `tool_paths.json` build API file.
#
# - Metadata is used to add an distribution manifest entry describing how to
#   copy the stripped executable binary to 'bin/$output_name'. NOTE: This
#   only happens if the invoker hasn't already set this entry.
#
# - Metadata is added for link_output_rspfile(). See its documentation for details.
#
# This accepts all arguments from the built-in GN executable() template,
# as well as:
#
#   exclude_toolchain_tags (optional)
#     [strings] A list of tags that corresponds to toolchain variants that
#     this target should not be built with. E.g. this is useful to prevent
#     a target being built in ASan mode because it makes it too slow to
#     run.
#
template("executable") {
  _executable_name = target_name
  _variant_shared = false
  variant_target("executable") {
    deps = []
    assert_no_deps = []
    target_name = _executable_name

    # NOTE: Zircon-specific toolchains don't need a syslog backend.
    # TODO(fxbug.dev/60072): Clean up logging backends for executables.
    disable_syslog_backend = defined(invoker.disable_syslog_backend) &&
                             invoker.disable_syslog_backend

    if (zircon_toolchain != false) {
      disable_syslog_backend = true
    }

    # Explicitly forward visibility, implicitly forward everything else
    # (except metadata, handled below).
    # See comment in template("shared_library") above for details.
    forward_variables_from(invoker, [ "visibility" ])
    forward_variables_from(invoker,
                           "*",
                           [
                             "metadata",
                             "visibility",
                           ])

    if (!defined(output_dir)) {
      output_dir = root_out_dir
    }
    if (!defined(output_name)) {
      output_name = target_name
    }
    if (!defined(output_extension)) {
      if (current_os == "win") {
        output_extension = "exe"
      } else {
        output_extension = ""
      }
    }

    output_file = "$output_dir/$output_name"
    if (output_extension != "") {
      output_file += ".$output_extension"
    }

    # TODO(fxbug.dev/54322): Zircon toolchains must use a .debug suffix for non-stripped
    # executables, instead of putting them into exe.unstripped. This can be
    # changed after build unification completes.
    if (zircon_toolchain != false) {
      link_output_file = output_file + zircon_toolchain.link_output_suffix
    } else {
      link_output_file = "$output_dir/exe.unstripped/$output_name"
    }

    deps += default_executable_deps

    fdio_config = "//build/config/fuchsia:fdio_config"
    if (configs + [ fdio_config ] - [ fdio_config ] != configs) {
      # Now that fdio is built in this very build, we can't get away with
      # simply pointing the linker at the place where we know the fdio binary
      # will reside: we need a proper dependency.
      deps += [ "//sdk/lib/fdio" ]
    }

    # This ensures that non-Zircon host executables get __zx_panic.
    #
    # TODO(fxbug.dev/34571): This will likely no longer be needed at some point.  See
    # the bug for more info/discussion.
    if (is_host) {
      deps += [ "//zircon/system/ulib/zx-panic-libc" ]
    }

    if (disable_syslog_backend) {
      assert_no_deps += [ "//sdk/lib/syslog/cpp" ]
    } else {
      has_syslog_backend = false

      foreach(dep, deps) {
        dep = get_label_info(dep, "label_no_toolchain")
        has_syslog_backend =
            has_syslog_backend || dep == "//sdk/lib/syslog/cpp:backend" ||
            dep == "//sdk/lib/syslog/cpp:backend_legacy"
      }

      if (!has_syslog_backend) {
        # All executables automatically get the legacy backend.
        deps += [ "//sdk/lib/syslog/cpp:backend_legacy" ]
        assert_no_deps += [ "//sdk/lib/syslog/cpp:backend" ]
      }
    }

    rebased_output_file = rebase_path(output_file, root_build_dir)
    rebased_link_output_file = rebase_path(link_output_file, root_build_dir)

    metadata = {
      binaries = []

      if (defined(invoker.metadata)) {
        forward_variables_from(invoker.metadata, "*")
      }

      binaries += [
        {
          type = "executable"
          label = get_label_info(":$target_name", "label_with_toolchain")
          cpu = current_cpu
          os = current_os
          debug = rebased_link_output_file
          dist = rebased_output_file
          if (current_os != "mac" && current_os != "win") {
            elf_build_id =
                rebase_path("$output_file.build-id.stamp", root_build_dir)
          }
          if (output_breakpad_syms && current_os == "fuchsia") {
            breakpad = rebase_path("$output_file.sym", root_build_dir)
          }
        },
      ]

      if (is_fuchsia) {
        # NOTE: executables built in Zircon toolchains are not meant to be
        # distributed in Fuchsia packages.
        if (zircon_toolchain == false) {
          # Used by the distribution_manifest() template.
          if (!defined(distribution_entries)) {
            distribution_entries = [
              {
                source = rebased_output_file
                destination = "bin/$output_name"
                label =
                    get_label_info(":$_executable_name", "label_with_toolchain")
              },
            ]
          }

          if (!defined(test_component_manifest_program)) {
            # Used by the fuchsia_test_component_manifest() template.
            test_component_manifest_program = [
              {
                program = {
                  binary = "bin/$output_name"
                }
              },
            ]
            test_component_manifest_program_barrier = []
          }
        }
      } else {
        tool_paths = [
          {
            cpu = current_cpu
            label = get_label_info(":$target_name", "label_with_toolchain")
            name = output_name
            os = current_os
            path = rebased_output_file
          },
        ]
      }

      # Used by link_output_rspfile(), see its documentation for details.
      link_output_path = [ rebased_link_output_file ]
      link_output_barrier = []
    }
  }
}

# This wraps the GN built-in loadable_module() template, adding a few more features.
# See the documentation for executable() to see them.
#
# NOTE: The GN documentation is not very clear about the distinction between a
# loadable_module() and a shared_library(). Both will generate the same
# .so / .dylib / .dll based on the platform, but the difference is how they are
# handled by their dependents at link time.
#
# Let's consider an executable("foo") that depends on both a shared_library("bar")
# and a loadable_module("zoo"):
#
# - If `foo` needs to be built, then both `bar` and `zoo` will be built before it
#   (e.g. generating `libbar.so` and `libzoo.so` on ELF systems).
#
# - When `foo` is linked, only `libbar.so` will be listed on its final link command.
#   This ends up creating an import directive inside the `foo` executable (e.g. a
#   DT_NEEDED entry on ELF systems).
#
# The end result is a `foo` executable that requires a `libbar.so` to start
# properly. While it may choose to load `libzoo.so` or not, at runtime, using
# dlopen(), LoadLibrary() or any other platform-specific mechanism.
#
# This accepts all arguments from the built-in loadable_module(), as well as:
#
#   exclude_toolchain_tags (optional)
#     [strings] List of toolchain or variant tags. See variant_target() or
#     executable() documentation for details.
#
template("loadable_module") {
  _module_name = target_name

  # NOTE: Allow PIC-friendly toolchains to use loadable_module().
  _variant_shared = toolchain_variant.with_shared

  variant_target("loadable_module") {
    target_name = _module_name

    # Explicitly forward visibility, implicitly forward everything else
    # (except metadata, handled below).
    # See comment in template("shared_library") above for details.
    forward_variables_from(invoker, [ "visibility" ])
    forward_variables_from(invoker,
                           "*",
                           [
                             "metadata",
                             "visibility",
                           ])

    if (!defined(output_dir)) {
      output_dir = root_out_dir
    }
    if (!defined(output_name)) {
      output_name = target_name
    }
    if (!defined(output_extension)) {
      if (current_os == "mac") {
        output_extension = "dylib"
      } else if (current_os == "win") {
        output_extension = "dll"
      } else {
        output_extension = "so"
      }
    }

    output_file_name = output_name
    if (output_extension != "") {
      output_file_name += ".$output_extension"
    }
    output_file = "$output_dir/$output_file_name"
    if (zircon_toolchain != false) {
      link_output_file =
          "$output_dir/$output_file_name" + zircon_toolchain.link_output_suffix
    } else {
      link_output_file = "$output_dir/lib.unstripped/$output_file_name"
    }

    rebased_output_file = rebase_path(output_file, root_build_dir)
    rebased_link_output_file = rebase_path(link_output_file, root_build_dir)

    metadata = {
      binaries = []

      if (defined(invoker.metadata)) {
        forward_variables_from(invoker.metadata, "*")
      }

      binaries += [
        {
          type = "loadable_module"
          label = get_label_info(":$target_name", "label_with_toolchain")
          cpu = current_cpu
          os = current_os
          debug = rebased_link_output_file
          dist = rebased_output_file
          if (current_os != "mac" && current_os != "win") {
            elf_build_id =
                rebase_path("$output_file.build-id.stamp", root_build_dir)
          }
          if (output_breakpad_syms && current_os == "fuchsia") {
            breakpad = rebase_path("$output_file.sym", root_build_dir)
          }
        },
      ]

      # NOTE: loadable modules built with Zircon toolchains should not go
      # into Fuchsia packages by default.
      if (is_fuchsia && zircon_toolchain == false) {
        if (!defined(distribution_entries)) {
          # Used by the distribution_manifest template.
          distribution_entries = [
            {
              source = rebased_output_file
              destination = "lib/$output_file_name"
              label = get_label_info(":$_module_name", "label_with_toolchain")
            },
          ]
        }
      }

      # Used by link_output_rspfile()
      link_output_path = [ rebased_link_output_file ]
      link_output_barrier = []
    }
  }
}

# Some targets we share with Chromium declare themselves to be components,
# which means they can build either as shared libraries or as static libraries.
# We build them as static libraries.
template("component") {
  if (!defined(invoker.sources)) {
    # When there are no sources defined, use a source set to avoid creating
    # an empty static library (which generally don't work).
    _component_mode = "source_set"
  } else {
    _component_mode = "static_library"
  }

  target(_component_mode, target_name) {
    # Explicitly forward visibility, implicitly forward everything else.
    # See comment in template("shared_library") above for details.
    forward_variables_from(invoker, [ "visibility" ])
    forward_variables_from(invoker, "*", [ "visibility" ])
  }
}

set_defaults("component") {
  configs = default_common_binary_configs
}

declare_args() {
  # If enabled, all filesystem activity by actions will be traced and checked
  # against their declared inputs and outputs and depfiles (if present).
  # An action that accesses undeclared inputs or outputs will fail the build.
  build_should_trace_actions = false
}

foreach(_target_type,
        [
          "action",
          "action_foreach",
        ]) {
  template(_target_type) {
    target(_target_type, target_name) {
      forward_variables_from(invoker,
                             "*",
                             [
                               "args",
                               "script",
                               "testonly",
                               "visibility",
                               "metadata",
                             ])

      forward_variables_from(invoker,
                             [
                               "testonly",
                               "visibility",
                             ])

      if (!defined(inputs)) {
        inputs = []
      }

      # This wraps the built-in action template to enforce best practices.
      # In particular:
      # * If the script is Python, use the in-tree interpreter.
      #   This prevents the script from relying on the Python that happens to
      #   be in the PATH, making the build more hermetic.
      if (get_path_info(invoker.script, "extension") == "py") {
        _invoker_script = python_exe_src
        _invoker_args = [
          # Speed up startup by not looking for site packages.
          "-S",
          rebase_path(invoker.script, root_build_dir),
        ]
        if (defined(invoker.args)) {
          _invoker_args += invoker.args
        }
        inputs += [ invoker.script ]
      } else {
        _invoker_script = invoker.script
        _invoker_args = []
        if (defined(invoker.args)) {
          _invoker_args = invoker.args
        }
      }

      # If the action has inputs/outputs that are not explicitly stated then it will
      # fail verification against the trace.
      # Actions that are known non-hermetic should set `hermetic_deps = false`.
      # TODO(rudymathu): At some point, we may want to restrict usage of
      # non-hermetic actions, which we can do by depending on a target with
      # explicit visibility.
      hermetic_deps = true
      if (defined(invoker.hermetic_deps)) {
        hermetic_deps = invoker.hermetic_deps
      }

      # TODO(shayba): fix response file issue (see below)
      should_trace = hermetic_deps && build_should_trace_actions &&
                     !defined(response_file_contents)
      metadata = {
        if (defined(invoker.metadata)) {
          forward_variables_from(invoker.metadata, "*")
        }
        if (should_trace) {
          traceable_action =
              [ get_label_info(":$target_name", "label_no_toolchain") ]
        }
      }

      if (!should_trace) {
        script = _invoker_script
        args = _invoker_args
      } else {
        script = python_exe_src

        inputs += [
          "//build/tracer/action_tracer.py",
          _invoker_script,
        ]

        args = [
          # Speed up startup by not looking for site packages.
          "-S",

          # This wraps actions with a filesystem activity tracer.
          rebase_path("//build/tracer/action_tracer.py", root_build_dir),
          "--label",
          get_label_info(":$target_name", "label_with_toolchain"),
          "--script",
          rebase_path(_invoker_script, root_build_dir),
          "--trace-output",
        ]
        if (_target_type == "action") {
          args += [ rebase_path("${target_gen_dir}/${target_name}_trace.txt",
                                root_build_dir) ]
        } else if (_target_type == "action_foreach") {
          args += [ rebase_path(
                  "${target_gen_dir}/${target_name}_{{source_name_part}}_trace.txt",
                  root_build_dir) ]
        }

        if (defined(sources)) {
          args += [ "--sources" ] + rebase_path(sources, root_build_dir)
        }

        if (defined(inputs)) {
          args += [ "--inputs" ] + rebase_path(inputs, root_build_dir)
        }

        if (defined(outputs)) {
          args += [ "--outputs" ] + rebase_path(outputs, root_build_dir)
        }

        if (defined(depfile)) {
          args += [
            "--depfile",
            rebase_path(depfile, root_build_dir),
          ]
        }

        if (defined(response_file_contents) && response_file_contents != []) {
          args += [
            "--response-file-name",
            "{{response_file_name}}",
          ]
        }

        args += [ "--" ] + _invoker_args
      }
    }
  }
}

# When generating Fuchsia user binaries, ensure the right sysroot-related
# dependencies are added to source_set() and static_library() instances
# automatically.
if (is_fuchsia && zircon_toolchain == false) {
  template("source_set") {
    source_set(target_name) {
      forward_variables_from(invoker,
                             "*",
                             [
                               "testonly",
                               "visibility",
                             ])
      forward_variables_from(invoker,
                             [
                               "testonly",
                               "visibility",
                             ])
      if (!defined(deps)) {
        deps = []
      }
      deps += [ "//zircon/public/sysroot:headers" ]
    }
  }

  template("static_library") {
    static_library(target_name) {
      forward_variables_from(invoker,
                             "*",
                             [
                               "testonly",
                               "visibility",
                             ])
      forward_variables_from(invoker,
                             [
                               "testonly",
                               "visibility",
                             ])
      if (!defined(deps)) {
        deps = []
      }
      deps += [ "//zircon/public/sysroot:headers" ]
    }
  }
}