# Copyright 2020 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

import("//build/config/clang/clang.gni")
import("//build/config/compiler.gni")
import("//build/config/zircon/levels.gni")
import("//build/toolchain/breakpad.gni")
import("//build/toolchain/ccache.gni")
import("//build/toolchain/default_tools.gni")
import("//build/toolchain/goma.gni")
import("//build/toolchain/zircon/clang.gni")
import("//build/toolchain/zircon/gcc.gni")
import("//build/zircon/build_args.gni")

_buildidtool =
    rebase_path("//prebuilt/tools/buildidtool/${host_platform}/buildidtool",
                root_build_dir)

# IMPORTANT: The zircon_toolchain() template does not use clang_toolchain()
# defined in //build/toolchain/clang_toolchain.gni, because there are several
# important differences between their tool() commands. A few examples:
#
#  - clang_toolchain() does not support GCC builds.
#
#  - The 'alink' command differs slightly between the build systems:
#      GN: .../llvm-ar ${arflags} rcsD ${out} @"${out}.rsp"
#      ZN: .../llvm-ar ${arflags} cqsD ${out} '@${out}.rsp'
#
#  - The response file paths slightly differ:
#      GN: ${output_dir}/${target_output_name}${output_extension}.rsp
#      ZN: ${output_dir}/${target_output_name}.rsp
#
#  - Stripping works differently as well, e.g. on host Linux:
#      GN: .../llvm-objcopy --strip-all <src> <dst>
#      ZN: .../llvm-strip -o <dst> <src>
#
#  - Many trivial differences, like the position of option like '-o <output>'
#    or {{cflags}}, {{ldflags}} etc, escaping some paths with quotes in one
#    build but not the other make comparing final build commands difficult.
#
#  - Static and shared libraries are ordered differently in link inputs:
#      GN: -Wl,--start-group <inputs> {{solibs}} -Wl,--end-group {{libs}}
#      ZN: -Wl,--start-group <inputs> {{libs}} -Wl,--end-group {{solibs}}
#
#  - Slightly different flags to specify the link map file:
#      GN: -Wl,--Map=<file>
#      ZN: -Wl,-Map=<file>
#
#  - Different naming conventions for debug binaries:
#      GN: {{output_dir}}/exe.unstripped/{{target_output_name}}{{output_extension}}
#      ZN: {{output_dir}}/{{target_output_name}}{{output_extension}}.debug
#
# For build unification, it is critical to ensure that the Fuchsia and
# Zircon builds generate the same set of commands, so the template defined
# here replicated the original Zircon commands. After unification completes,
# it might be worthwhile to refactor clang_toolchain() and zircon_toolchain()
# to use a common set of definitions instead.
#
# IMPORTANT: The zircon_toolchain global variable is defined as a scope for
# Zircon-specific toolchains, otherwise it is just 'false'. See below for the
# detailed schema for this scope.

# Defines a Clang-based Zircon toolchain.
#
# Parameters (same as the ZN build c_toolchain() template):
#
#   cpu, os
#     Required: $current_cpu and $current_os values for the toolchain.
#     Type: string
#
#   strip
#     Optional: If not false, linked binaries will be stripped.
#     If this is a string rather than true, it's a switch to the `objcopy`
#     tool, e.g. "--strip-sections".
#     Type: bool or string
#     Default: false
#
#   tool_dir, tool_prefix
#     Optional: If one of these is provided, then both must be provided.
#     $tool_dir is the directory where compiler tools are found, or "" if they
#     are found by searching `PATH`.  $tool_prefix is the prefix prepended to
#     each tool's name.  If $gcc is true, then $tool_dir defaults to "" if
#     $host is true and $gcc_tool_dir otherwise.  If $gcc is true and $host is
#     not true or $cpu != $host_cpu or $os != $host_os, then $tool_prefix
#     defaults to the "<tuple>-" prefix appropriate for $cpu and $os;
#     otherwise it defaults to "".
#     Type: string
#
#   use_goma
#     Optional: If defined, overrides the $use_goma build argument.
#     If true, compilation commands are prefixed with "$goma_dir/gomacc".
#     Type: bool
#     Default: $use_goma
#
#   use_ccache
#     Optional: If defined, overrides the $use_ccache build argument.
#     If true, compilation commands are prefixed with "ccache".
#     Type: bool
#     Default: $use_ccache
#
#   deps, toolchain_args
#     Optional: See toolchain().
#
# The following parameters are specific to the Fuchsia build and were not
# part of the original Zircon build.
#
#   environment
#     Required: A string describing the runtime environment of the code
#     generated by this toolchain. This is a label like "kernel" or "multiboot"
#     that will appear in as `zircon_toolchain.environment` and can be checked
#     in build rules, as requested by several Zircon artefacts.
#
# The following parameters from the original Zircon builds are NOT SUPPORTED
# and documented here for historical reasons!
#
#   gcc
#     Optional: If true, this toolchain uses GCC rather than Clang.
#     This template will instead look for 'gcc' in the list of tags.
#     Type: bool
#     Default: false
#
#   host
#     Optional: If true, this is doing "host" compiles.  This only matters
#     if $os == $host_os and $cpu == $host_cpu, i.e. native compilation for
#     the build host.  In that case, when using GCC, this says to use plain
#     "gcc" et al rather than "<triple>-gcc" et al.
#     Type: bool
#     Default: false
#
#   shlib
#     Optional: If true, the toolchain will support the "solink" and
#     "solink_module" (for shared_library() and loadable_module() targets,
#     respectively). This is now determined by the values of with_shared
#     and is_pic_default in toolchain_variant.
#     Type: bool
#     Default: false
#
#   toolchain_vars
#     Optional: Additional keys/values to export in the $zircon_toolchain scope.
#     The $zircon_toolchain global variable is a scope that provides various\
#     fields describing how things are done in this toolchain.  Several standard
#     fields are set automatically.  This can supply others.
#     Type: scope
#     Default: {}
#
template("zircon_toolchain") {
  # Translate GN cpu/os to GNU config tuple.
  if (invoker.cpu == "arm64") {
    tc_cpu = "aarch64"
  } else if (invoker.cpu == "x64") {
    tc_cpu = "x86_64"
  } else {
    tc_cpu = invoker.cpu
  }
  tc_target = "${tc_cpu}-"
  if (invoker.os == "mac") {
    tc_target += "apple-darwin"
  } else if (invoker.os == "win") {
    tc_target += "windows-msvc"
  } else if (invoker.os == "linux") {
    tc_target += "linux-gnu"
  } else {
    tc_target += invoker.os
  }

  assert(defined(invoker.environment), "'environment' argument is required!")

  # Cached and distributed wrappers just go on the front of compiler commands.
  compiler_prefix = ""
  if (defined(invoker.use_goma)) {
    use_goma = invoker.use_goma
  }
  if (use_goma) {
    goma_dir = rebase_path(goma_dir)
    compiler_prefix = "$goma_dir/gomacc "
  } else {
    if (defined(invoker.use_ccache)) {
      use_ccache = invoker.use_ccache
    }
    if (use_ccache) {
      compiler_prefix = "ccache "
    }
  }

  # Compute what will be the value of `toolchain_variant` for this instance.
  # This is invoker.toolchain_args.toolchain_variant, eventually augmented
  # by default key values.
  if (defined(invoker.toolchain_args)) {
    _t_args = invoker.toolchain_args
    if (defined(_t_args.toolchain_variant)) {
      _tv_args = _t_args.toolchain_variant
    }
  }
  _toolchain_variant = {
    # Default non-list values
    base = get_label_info(":$target_name", "label_no_toolchain")
    name = ""
    suffix = ""
    is_pic_default = false
    with_shared = false
    instrumented = false

    # Forward values from invoker.toolchain_args.toolchain_variant, if any.
    if (defined(_tv_args)) {
      forward_variables_from(_tv_args, "*")
    }

    # Create empty lists if they were not forwarded above.
    if (!defined(configs)) {
      configs = []
    }
    if (!defined(prefix_configs)) {
      prefix_configs = []
    }
    if (!defined(remove_common_configs)) {
      remove_common_configs = []
    }
    if (!defined(remove_shared_configs)) {
      remove_shared_configs = []
    }
    if (!defined(tags)) {
      tags = []
    }
  }

  use_gcc =
      _toolchain_variant.tags + [ "gcc" ] - [ "gcc" ] != _toolchain_variant.tags

  use_strip = defined(invoker.strip) && invoker.strip != false

  # These are used in some, but not all, of the if branches below.
  if (clang_tool_dir == "") {
    clangxx_exec_inputs = []
    clangxx_exec_command = "clang++"
  } else {
    clangxx_exec_inputs = [ "${clang_tool_dir}/clang++" ]
    clangxx_exec_command = rebase_path(clangxx_exec_inputs[0], root_build_dir)
  }
  clangxx_args = [
    clangxx_exec_command,
    "--target=$tc_target",

    # This affects the multilib selection so that we get the right
    # libc++.a binary.  It's not really proper that we have to encode here
    # the multilib-affecting switches we presume all configs actually will
    # use in the toolchain being defined.  But since everything in this
    # codebase (certainly everything we support being compiled by GCC) is
    # definitely compiled with -fno-exceptions, we can live with it.  An
    # alternative would be to add the lib_dirs in a config() instead and
    # then somehow tie it to exceptions vs no-exceptions configs, but we
    # have no present need for any such complexity.
    "-fno-exceptions",
  ]
  not_needed([ "clangxx_args" ])

  # If either $tool_dir or $tool_prefix is supplied then both must be supplied.
  if (defined(invoker.tool_dir) || defined(invoker.tool_prefix)) {
    tc = {
      tool_dir = invoker.tool_dir
      tool_prefix = invoker.tool_prefix
    }
  } else if (use_gcc) {
    if (defined(invoker.host) && invoker.host) {
      tc = {
        tool_dir = ""
        if (invoker.cpu == host_cpu && invoker.os == host_os) {
          tool_prefix = ""
        } else {
          tool_prefix = "${tc_target}-"
        }
      }
    } else {
      tc = {
        tool_dir = gcc_tool_dir
        tool_prefix = "${tc_cpu}-elf-"
        version_string = gcc_version_string
        include_dirs = [ rebase_path(
                exec_script(
                    "/usr/bin/env",
                    clangxx_args + [ "-print-file-name=include/c++/v1" ],
                    "trim string",
                    clangxx_exec_inputs),
                "",
                root_build_dir) ]
        lib_dirs = [ rebase_path(
                get_path_info(
                    exec_script("/usr/bin/env",
                                clangxx_args + [ "-print-file-name=libc++.a" ],
                                "trim string",
                                clangxx_exec_inputs),
                    "dir"),
                "",
                root_build_dir) ]
      }
    }
  } else {
    tc = {
      tool_dir = clang_tool_dir
      tool_prefix = "llvm-"
      version_string = clang_version_string

      # TODO(fxbug.dev/27328): The MSVC target in the clang driver never uses the
      # -stdlib=libc++ switch or the toolchain's own libc++ include path.
      if (invoker.os == "win") {
        include_dirs = [ rebase_path(
                exec_script(
                    "/usr/bin/env",
                    clangxx_args + [ "-print-file-name=include/c++/v1" ],
                    "trim string",
                    clangxx_exec_inputs),
                "",
                root_build_dir) ]
      }
    }
  }

  if (use_gcc) {
    tc.cc = "${tc.tool_prefix}gcc"
    tc.cxx = "${tc.tool_prefix}g++"
  } else {
    tc.cc = "clang"
    tc.cxx = "clang++"
  }

  if (tc.tool_dir == "") {
    dir_prefix = ""
    if (use_goma) {
      # GOMA requires an absolute path to the compiler.
      compiler_prefix = ""
    }
  } else {
    dir_prefix = rebase_path(tc.tool_dir, root_build_dir) + "/"
  }

  cc = "$dir_prefix${tc.cc}"
  cxx = "$dir_prefix${tc.cxx}"
  ld = cxx
  ar = "$dir_prefix${tc.tool_prefix}ar"

  # All other OS possibilities are ELF and so might have ELF build IDs.
  is_elf = invoker.os != "mac" && invoker.os != "win"

  # buildidtool only supports ELF build IDs.
  use_buildidtool = is_elf

  # The prebuilt dump_syms tool is the one that only supports ELF.
  # Breakpad has dump_syms tools for Mach-O (macOS) and PE-COFF
  # (Windows/EFI) too, but the PE-COFF tool only runs on Windows.  The
  # Mach-O tool can be cross compiled, though we can't cross compile to
  # macOS anyway.  But we also don't have a prebuilt of the macOS
  # self-targetting Breakpad dump_syms tool on hand.
  use_breakpad = output_breakpad_syms && is_elf && use_buildidtool
  if (use_breakpad) {
    dump_syms = breakpad_dump_syms
    dump_syms += " -r "
    if (invoker.os == "fuchsia") {
      dump_syms += " -n \"<_>\" -o Fuchsia"
    } else {
      # Use what's probably installation name, not the ".debug" name.
      dump_syms +=
          " -n \"{{output_dir}}/{{target_output_name}}{{output_extension}}\""
    }
  }

  # TODO(fxbug.dev/58294): enable for other targets and binary formats.
  use_gsym = output_gsym && is_elf && invoker.os == "fuchsia"
  if (use_gsym) {
    gsymutil = rebase_path("$clang_tool_dir/llvm-gsymutil", root_build_dir)
  }

  _compile_common = {
    outputs =
        [ "{{source_out_dir}}/{{target_output_name}}.{{source_file_part}}.o" ]
    depfile = "{{output}}.d"
    depsformat = "gcc"
    switches = "-MD -MF $depfile -o {{output}} {{defines}} {{include_dirs}}"
  }

  _link_common = {
    lib_switch = "-l"
    lib_dir_switch = "-L"
    default_output_dir = "{{target_out_dir}}"
    outfile = "{{output_dir}}/{{target_output_name}}{{output_extension}}"
    runtime_outputs = [ outfile ]
    outputs = runtime_outputs

    if (use_strip) {
      unstripped_outfile = "${outfile}.debug"
      outputs += [ unstripped_outfile ]
      strip_command = " && "

      _strip = invoker.strip
      if (use_gcc && _strip == "--strip-sections") {
        # GNU strip/objcopy doesn't support --strip-sections.
        _strip = true
      }

      if (_strip == true) {
        if (invoker.os == "mac") {
          # Only the host native tool works on macOS.
          strip_tool = "strip"
        } else {
          strip_tool = "$dir_prefix${tc.tool_prefix}strip"
        }
        strip_command += "$strip_tool -o \"$outfile\" \"$unstripped_outfile\""
      } else {
        strip_command += "$dir_prefix${tc.tool_prefix}objcopy ${_strip}" +
                         " \"$unstripped_outfile\" \"$outfile\""
      }
    } else {
      unstripped_outfile = outfile
      strip_command = ""
    }

    rspfile = "${outfile}.rsp"
    switches = "-o $unstripped_outfile {{ldflags}}"
    if (invoker.os == "mac") {
      rspfile_content = "{{inputs_newline}}"
      link_inputs = "-Wl,-filelist,$rspfile {{libs}} {{solibs}}"
    } else {
      rspfile_content = "{{inputs}}"
      link_inputs = "'@$rspfile'"
      if (invoker.os == "win") {
        link_inputs += " {{libs}} {{solibs}}"
      } else {
        link_inputs = "-Wl,--start-group " + link_inputs +
                      " {{libs}} -Wl,--end-group {{solibs}}"
        depfile = "$outfile.d"
        depsformat = "gcc"
        switches += " -Wl,--dependency-file=$depfile"
        mapfile = "${outfile}.map"
        outputs += [ mapfile ]
        switches += " -Wl,-Map,$mapfile"
      }
    }

    if (invoker.os == "win") {
      # This assumes "-Wl,/debug" or suchlike is in ldflags.  If it's not
      # but nothing depends on the .pdb file, then it should be OK that
      # Ninja thinks it's an additional output but it doesn't get created.
      outputs += [ "{{output_dir}}/{{target_output_name}}.pdb" ]
    }

    if (use_buildidtool) {
      buildid_stampfile = "${outfile}.build-id.stamp"
      strip_command +=
          " && $_buildidtool -build-id-dir \".build-id\"" +
          " -stamp \"$buildid_stampfile\"" +
          " -entry \"=$outfile\" -entry \".debug=$unstripped_outfile\""
    }

    if (use_breakpad) {
      breakpad_outfile = "${outfile}.sym"
      outputs += [ breakpad_outfile ]

      # dump_syms will fail if there is no build ID.  buildidtool succeeds and
      # writes an empty stamp file for that case, so use it to tell whether
      # dump_syms should be run. In any case always create a .sym because we
      # told ninja we would create one above.
      assert(use_buildidtool)
      strip_command +=
          " && { " +  # The brace group is superfluous.
          "test ! -s \"$buildid_stampfile\" && " +
          "touch \"$breakpad_outfile\"  || " +
          "$dump_syms \"$unstripped_outfile\" > \"$breakpad_outfile\"" +
          "; }"  # But makes the control flow a little clearer.
    }

    if (use_gsym) {
      gsym_outfile = "${outfile}.gsym"
      outputs += [ gsym_outfile ]
      strip_command += " && $gsymutil --convert=\"$unstripped_outfile\" --out-file=\"$gsym_outfile.gsym\""
    }
  }

  not_needed(invoker, [ "propagates_configs" ])

  toolchain(target_name) {
    propagates_configs = true

    forward_variables_from(invoker, [ "deps" ])

    # Every toolchain needs the standard stamp and copy tools.
    tool("stamp") {
      command = stamp_command
      description = stamp_description
    }

    tool("copy") {
      # We use link instead of copy; the way the "copy" tool is used is
      # compatible with links since Ninja tracks changes to the source.
      command = copy_command
      description = copy_description
    }

    tool("asm") {
      description = "ASM {{output}}"
      forward_variables_from(_compile_common, "*")
      command = "$cc $switches {{asmflags}} -c {{source}}"
      command_launcher = compiler_prefix
    }

    tool("cc") {
      description = "CC {{output}}"
      forward_variables_from(_compile_common, "*")
      command = "$cc $switches {{cflags}} {{cflags_c}} -c {{source}}"
      command_launcher = compiler_prefix
    }

    tool("cxx") {
      description = "CXX {{output}}"
      forward_variables_from(_compile_common, "*")
      command = "$cxx $switches {{cflags}} {{cflags_cc}} -c {{source}}"
      command_launcher = compiler_prefix
    }

    tool("alink") {
      description = "AR {{output}}"
      rspfile = "{{output}}.rsp"
      command =
          "rm -f {{output}} && $ar {{arflags}} cqsD {{output}} '@$rspfile'"
      rspfile_content = "{{inputs}}"
      default_output_dir = "{{target_out_dir}}"
      default_output_extension = ".a"
      output_prefix = "lib"
      outputs = [ "{{output_dir}}/{{target_output_name}}{{output_extension}}" ]
    }

    tool("link") {
      forward_variables_from(_link_common, "*")
      description = "LINK $outfile"
      if (invoker.os == "win") {
        default_output_extension = ".exe"
      }
      command = "$ld $switches $link_inputs$strip_command"
    }

    if (_toolchain_variant.with_shared || _toolchain_variant.is_pic_default) {
      # We don't support building shared libraries for host tools.
      assert(invoker.os == "fuchsia",
             "shared library creation not supported for ${invoker.os}")

      solink_common = {
        forward_variables_from(_link_common, "*")
        depend_output = outfile
        link_output = unstripped_outfile
      }

      tool("solink") {
        forward_variables_from(solink_common, "*")

        description = "LINK_SHLIB $outfile"

        output_prefix = "lib"
        if (current_os == "mac") {
          default_output_extension = ".dylib"
        } else if (current_os == "win") {
          default_output_extension = ".dll"
        } else {
          default_output_extension = ".so"
        }

        # Put the automatic -soname first so that ldflags can override it.
        soname = "{{target_output_name}}{{output_extension}}"
        switches = "-shared -Wl,-soname,$soname $switches"
        if (use_gcc && tc.tool_prefix == "${tc_cpu}-elf-") {
          # The *-elf-gcc driver doesn't handle -shared properly.
          # Just force it through to the linker.
          switches = "-Wl,$switches"
        }

        command = "$ld $switches $link_inputs$strip_command"

        # TODO: abi stubs
      }

      tool("solink_module") {
        forward_variables_from(solink_common, "*")

        description = "LINK_MODULE $outfile"

        if (current_os == "mac") {
          default_output_extension = ".dylib"
        } else if (current_os == "win") {
          default_output_extension = ".dll"
        } else {
          default_output_extension = ".so"
        }

        switches = "-shared $switches"
        if (use_gcc && tc.tool_prefix == "${tc_cpu}-elf-") {
          # The *-elf-gcc driver doesn't handle -shared properly.
          # Just force it through to the linker.
          switches = "-Wl,$switches"
        }

        command = "$ld $switches $link_inputs$strip_command"
      }
    }

    # IMPORTANT: The toolchain_args variables in the Fuchsia and Zircon builds
    # are very distinct.

    # TODO(fxbug.dev/51585): Keep this in sync with the corresponding code in //BUILD.gn
    if (optimize == "none" || optimize == "sanitizer" ||
        optimize == "profile" || optimize == "size") {
      _zircon_optimize = optimize
    } else {
      _zircon_optimize = zircon_optimize
    }

    # The assert level used by Zircon artifacts is controlled by the zx_assert_level
    # build argument, except that, as a special case, zircon_kernel_disable_asserts
    # can be set to true to disable them in the kernel itself.
    #
    # For legacy reasons, also recognize that zircon_extra_args.environment_args is
    # set to a specific value to disable kernel assertions as well. For more details
    # see https://fxbug.dev/67356.
    _assert_level = zx_assert_level

    if (defined(invoker.toolchain_tags) &&
        invoker.toolchain_tags + [ "kernel" ] - [ "kernel" ] !=
        invoker.toolchain_tags) {
      if (zircon_kernel_disable_asserts) {
        _assert_level = 0
      }

      if (defined(zircon_extra_args.environment_args)) {
        _env_args = zircon_extra_args.environment_args
        _expected_args = [
          {
            kernel = true
            assert_level = 0
          },
        ]
        assert(
            _env_args == _expected_args,
            "Invalid zircon_extra_args.environment_args value (see https://fxbug.dev/67356): ${_env_args}")

        _assert_level = 0
      }
    }

    toolchain_args = {
      current_cpu = invoker.cpu
      current_os = invoker.os

      # NOTE: The Zircon build uses "default" for the default optimization
      # level, but the Fuchsia one uses either "debug" or "speed" if not
      # set explicitly, depending on 'is_debug'.
      #
      # Until both defaults are unified, overwrite the Fuchsia value with
      # the zircon one. This can also be overriden by a specific Zircon
      # toolchain by setting it in its own toolchain_args scope.
      #
      # Note: when invoking the Zircon build, the Fuchsia build will set
      # the 'optimize' build variable in the following cases:
      #  'none', 'sanitizer', 'profile' and 'size'.
      #
      # Otherwise the default is used. Try to replicate this here.
      #
      optimize = _zircon_optimize

      zx_assert_level = _assert_level

      if (defined(invoker.toolchain_args)) {
        forward_variables_from(invoker.toolchain_args,
                               "*",
                               [
                                 "cpu",
                                 "os",
                                 "toolchain_variant",
                               ])
      }

      # toolchain_variant is specific to the Fuchsia build, and documented in
      # //build/config/BUILDCONFIG.gn.
      toolchain_variant = {
      }
      toolchain_variant = _toolchain_variant

      # 'zircon_toolchain' is a scope that will only be defined for Zircon
      # toolchains, as a scope holding various keys used by misc targets to
      # select build settings. This corresponds to the Zircon build
      # 'toolchain' global toolchain variable, as well as a few Zircon global
      # variables that have been moved here:
      #
      #   cpu: [string] Target CPU using Clang conventions.
      #   target_tuple: [string] Target tuple using Clang conventions.
      #   environment: [string] The runtime environment that the binaries
      #     generated by this toolchain instance will run in. Used by the
      #     Zircon build rules in several places.
      #   link_output_suffix: [string] Suffix to append to linkable binaries
      #     with debug information.
      #   is_gcc: [boolean] True if this toolchain uses gcc.
      #
      #   include_dirs: [list of paths]
      #     Supported to add an `-isystem <dir>` parameter per list item during
      #     the build, but never used by Zircon environments. In practice
      #     only set above (see definition of `tc` scope) for Win32 toolchains.
      #
      #   lib_dirs: [list of paths]
      #     Library paths added to the "compiler" configuration, This is used
      #     to append the path of libc++.a's directory when gcc is used as
      #     a compiler.
      #
      # The following variables were used in the Zircon build but ignored here.
      #
      #   runtime_deps_cflags: [list of strings]
      #     Only used in practice to implement linking to static libc++, and
      #     adding Asan/UBSan-related flags, which are handled differently in
      #     the Fuchsia build.
      #
      #   executable_extension: [string]
      #     Either the empty string of "exe" for Windows. Handled differently
      #     in the Fuchsia build.
      #
      #   output_name_suffix: [string]
      #     Suffix for output file names, never used by the Zircon build.
      #
      #   breakpad_syms: [boolean]
      #     Override the value of the output_breakpad_syms build argument
      #     for a specific toolchain. Never used in the Zircon build.
      #
      #   libprefix: [string]
      #     An optional prefix for shared libraries. Only used by the Zircon
      #     build to prepend "fuzzer." for fuzzed shared libraries in the
      #     "user" environment. All this is handled differently by the Fuchsia
      #     build in the fuchsia toolchains.
      #
      zircon_toolchain = {
      }
      zircon_toolchain = {
        # This gets `tool_dir` et al as expected by c_utils.gni (set above).
        forward_variables_from(tc, "*")

        cpu = tc_cpu
        target_tuple = tc_target
        environment = invoker.environment

        # This is used in setting metadata.link_output.
        if (use_strip) {
          link_output_suffix = ".debug"
        } else {
          link_output_suffix = ""
        }

        if (!defined(include_dirs)) {
          include_dirs = []
        }

        if (!defined(lib_dirs)) {
          lib_dirs = []
        }

        # NOTE: This was a global variable in the Zircon build.
        is_gcc = use_gcc
      }
    }
  }
}