# Copyright 2019 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# This tool is for invoking by the performance comparison trybots.  It
# is intended for comparing the performance of two versions of
# Fuchsia.

import argparse
import glob
import json
import math
import os
import subprocess
import sys
import tarfile

import scipy.stats

# For comparing results from a performance test, we calculate
# confidence intervals for the mean running times of the test.  If the
# confidence intervals are non-overlapping, we conclude that the
# performance has improved or regressed for this test.
#
# Data is gathered from a 3-level sampling process:
#
#  1) Boot Fuchsia multiple times.
#  2) For each boot, launch the perf test process one or more times.
#  3) For each process launch, instantiate the performance test and
#     run the body of the test some number of times.
#
# This is intended to account for variation across boots and across process
# launches.
#
# Currently we use t-test confidence intervals.  This assumes that the
# values we apply the t-test to are normally distributed, or approximately
# normally distributed.  In future we could instead use bootstrap
# confidence intervals, which would avoid that assumption.

# Dataset types:
#
# There are four types of dataset containing raw perf test results:
#
#  * Process dataset: JSON data from a single *.fuchsiaperf.json file,
#    which is usually from a single process launch.  This may contain
#    results from multiple test cases.
#
#  * Boot dataset: Data from a single boot of Fuchsia.  This may contain
#    multiple process datasets.
#
#  * Multi-boot dataset: Data from multiple boots of a single build of
#    Fuchsia.  This may contain multiple boot datasets.
#
#  * Before/after dataset: Contains two multi-boot datasets, one from a
#    "before" build of Fuchsia and one from an "after" build.
#
# Note that we use the term "dataset" rather than "results" because the
# former makes it easier to disambiguate using singular vs. plural.  For
# example, "boot_results" is ambiguous as to whether it represents a single
# boot or whether it is a list where each entry is a "boot result"
# representing a single boot.  In contrast, "boot_dataset" (always a single
# instance) vs. "boot_datasets" (always a list or iterable) avoids that
# ambiguity.
#
# The infra recipe represents those datasets on the filesystem as follows:
#
#  * Process dataset: a single .fuchsiaperf.json file.
#
#  * Boot dataset: a directory containing files with names of the following
#    forms:
#
#      <test-executable-name>_process<number>.fuchsiaperf.json - process dataset
#      <test-executable-name>_process<number>.catapult_json - ignored here
#      summary.json - ignored here
#
#    The code below can read a boot dataset from tar files as well as from
#    directories.  Accepting tar files is a convenience for when doing
#    local testing of the statistics (including for validate_perfcompare).
#    The Swarming system used for the bots produces "out.tar" files as
#    results.
#
#  * Multi-boot dataset: a directory containing a "by_boot" subdirectory,
#    which contains boot dataset directories.
#
# A before/after dataset is represented as two directories.

# ALPHA is a parameter for calculating confidence intervals.  It is
# the probability that the true value for the statistic we're
# estimating (here, the mean running time) lies outside the confidence
# interval.
ALPHA = 0.01


def Mean(values):
    if len(values) == 0:
        raise AssertionError("Mean is not defined for an empty sample")
    return float(sum(values)) / len(values)


# Returns the mean and standard deviation of a sample.  This applies
# Bessel's correction to the calculation of the standard deviation.
#
# If the sample contains only a single value, this returns None for the
# standard deviation, because we cannot estimate the standard deviation
# with Bessel's correction in that case.
def MeanAndStddev(values):
    mean_val = Mean(values)
    if len(values) == 1:
        return mean_val, None
    sum_of_squares = 0.0
    for val in values:
        diff = val - mean_val
        sum_of_squares += diff * diff
    stddev_val = math.sqrt(sum_of_squares / (len(values) - 1))
    return mean_val, stddev_val


def FormatDecimal(val, decimal_places):
    return ("%%.%df" % decimal_places) % val


# Format the given "value +/- offset" confidence interval as a string.
#
# This prints a number of decimal fraction digits that is appropriate to
# the width of the confidence interval.  The offset part is formatted to 2
# significant figures.  The value part is formatted with the same number of
# decimal places as the offset.
def FormatConfidenceInterval(value, offset):
    if math.isinf(offset) or math.isnan(offset) or offset <= 0:
        return "%g +/- %g" % (value, offset)
    significant_figures = 2
    # Applying math.floor() ensures that powers of 10 and non powers of 10
    # (e.g. 0.10 and 0.11) are both formatted with the same number of
    # decimal places.
    log_value = int(math.floor(math.log10(offset)))
    decimal_places = max(significant_figures - log_value - 1, 0)
    return "%s +/- %s" % (
        FormatDecimal(value, decimal_places),
        FormatDecimal(offset, decimal_places),
    )


class Stats(object):
    def __init__(self, values, unit):
        self.unit = unit
        sample_size = len(values)
        mean, stddev = MeanAndStddev(values)
        self._mean = mean
        if stddev is None:
            self._offset = None
            self.interval = None
        else:
            self._offset = (
                -scipy.stats.t.ppf(ALPHA / 2, sample_size - 1)
                * stddev
                / math.sqrt(sample_size)
            )
            # Confidence interval for the mean.
            self.interval = (mean - self._offset, mean + self._offset)

    def FormatConfidenceInterval(self):
        if self._offset is None:
            # Point estimate only: We cannot calculate a confidence
            # interval because the sample only contained a single value.
            #
            # Explicitly use 12 significant figures to match what str()
            # does on floats in Python 2.  This gives plenty of precision
            # for practical use while suppressing rounding noise created by
            # various operations.
            return "%.12g %s" % (self._mean, self.unit)
        return "%s %s" % (
            FormatConfidenceInterval(self._mean, self._offset),
            self.unit,
        )

    # Returns the relative CI width, which is the width of the confidence
    # interval divided by the mean.
    def RelativeConfidenceIntervalWidth(self):
        assert self._offset is not None
        return self._offset * 2 / self._mean


def StatsFormatConfidenceInterval(stats):
    if stats is None:
        return "-"
    return stats.FormatConfidenceInterval()


def ReadJsonFile(filename):
    with open(filename, "r") as fh:
        return json.load(fh)


def IsResultsFilename(name):
    return name.endswith(".fuchsiaperf.json")


class SingleBootDataset(object):
    def __init__(self, filename):
        self._filename = filename

    def GetProcessDatasets(self):
        # Note that sorting the filename listing (from os.walk() or from
        # tarfile) is not essential, but it helps to make any later processing
        # more deterministic.
        if os.path.isfile(self._filename):
            # Read from tar file.
            with tarfile.open(self._filename) as tar:
                for member in sorted(
                    tar.getmembers(), key=lambda member: member.name
                ):
                    if IsResultsFilename(member.name):
                        yield json.load(tar.extractfile(member))
        else:
            # Read from directory.
            for dir_path, _, file_names in sorted(os.walk(self._filename)):
                for name in sorted(file_names):
                    if IsResultsFilename(name):
                        yield ReadJsonFile(os.path.join(dir_path, name))


class MultiBootDataset(object):
    def __init__(self, dir_path):
        self._dir_path = dir_path

    def GetBootDatasets(self):
        by_boot_dir = os.path.join(self._dir_path, "by_boot")
        assert os.path.exists(by_boot_dir), by_boot_dir
        for name in sorted(os.listdir(by_boot_dir)):
            yield SingleBootDataset(os.path.join(by_boot_dir, name))


# Takes a list of values that are collected from consecutive runs of a
# test.  For libperftest tests, those are test runs within a process.
#
# Returns the mean of the values, but excluding the first run.  We treat
# the initial run as a warmup run.  The initial run is often slower than
# later runs, so it would skew the mean if we included it.  The
# RoundTrip_*_MultiProcess tests are an extreme case, because the first run
# waits for a subprocess to start up.  See https://fxbug.dev/42097154.
def MeanExcludingWarmup(values):
    # Some tests report a single value per process run.  For those tests,
    # we use that value and don't discard it.
    if len(values) == 1:
        return values[0]
    return Mean(values[1:])


def FormatTestName(results):
    return "%s: %s" % (results["test_suite"], results["label"])


UNIT_ABBREVIATIONS = {"milliseconds": "ms", "nanoseconds": "ns"}


def FormatUnit(unit_set):
    assert len(unit_set) > 0
    if len(unit_set) > 1:
        raise AssertionError("Inconsistent units for test case: %s" % unit_set)
    unit = list(unit_set)[0]
    return UNIT_ABBREVIATIONS.get(unit, unit)


# This is the set of unit strings that are accepted by catapult_converter
# and treated as bigger-is-better by catapult_converter, and that don't
# have an explicit "_biggerIsBetter" suffix.
BIGGERISBETTER_UNITS = {
    "bits/second",
    "bytes/second",
    "frames/second",
}


def UnitBiggerIsBetter(unit):
    # We don't attempt to do any validation of the unit string here.  We
    # assume that was done at an earlier stage when the test was run and
    # when it invoked catapult_converter, which validates the unit string.
    return unit in BIGGERISBETTER_UNITS or unit.endswith("_biggerIsBetter")


# Takes a sequence of boot datasets and produces summary statistics.
# Returns a dict mapping test names to Stats objects.
def StatsFromBootDatasets(boot_datasets):
    # Mapping from test names to lists of values.
    results_map = {}
    # Mapping from test names to sets of strings (for units of measurement).
    units_map = {}
    for boot_dataset in boot_datasets:
        results_for_boot = {}
        for process_dataset in boot_dataset.GetProcessDatasets():
            for test_case in process_dataset:
                new_value = MeanExcludingWarmup(test_case["values"])
                name = FormatTestName(test_case)
                results_for_boot.setdefault(name, []).append(new_value)
                units_map.setdefault(name, set()).add(test_case["unit"])
        for label, values in results_for_boot.items():
            results_map.setdefault(label, []).append(Mean(values))
    return {
        name: Stats(values, FormatUnit(units_map[name]))
        for name, values in results_map.items()
    }


def StatsFromMultiBootDataset(multi_boot_dataset):
    return StatsFromBootDatasets(multi_boot_dataset.GetBootDatasets())


def FormatFactor(val_before, val_after):
    # Avoid division by zero.
    if val_before == 0:
        return "inf"
    return "%.3f" % (val_after / val_before)


def FormatFactorRange(interval_before, interval_after):
    if interval_before == (0, 0) and interval_after == (0, 0):
        return "no_change"
    if interval_before[0] < 0 or interval_after[0] < 0:
        return "ci_too_wide"
    factor_min = FormatFactor(interval_before[1], interval_after[0])
    factor_max = FormatFactor(interval_before[0], interval_after[1])
    return "%s-%s" % (factor_min, factor_max)


def FormatTable(heading_row, rows, out_fh):
    column_count = len(heading_row)
    for row in rows:
        assert len(row) == column_count
    rows = [heading_row] + rows
    widths = [
        2 + max(len(row[col_number]) for row in rows)
        for col_number in range(column_count)
    ]
    # Underline the heading row.
    rows.insert(1, ["-" * (width - 2) for width in widths])
    for row in rows:
        for col_number, value in enumerate(row):
            out_fh.write(value)
            if col_number < column_count - 1:
                out_fh.write(" " * (widths[col_number] - len(value)))
        out_fh.write("\n")


DIRECTION_MAP = {0: "no_sig_diff", -1: "improved", 1: "regressed"}


def CompareIntervals(stats_before, stats_after):
    assert stats_before is not None or stats_after is not None
    if stats_before is None:
        return "added", "-"
    if stats_after is None:
        return "removed", "-"
    if stats_before.interval is None or stats_after.interval is None:
        return "point_estimate", "-"
    # Using a ">" comparison rather than ">=" ensures that if the intervals
    # are equal and zero-width, they are treated as "no_sig_diff".
    if stats_after.interval[0] > stats_before.interval[1]:
        direction = 1
    elif stats_after.interval[1] < stats_before.interval[0]:
        direction = -1
    else:
        direction = 0
    # If the units changed, we use the new units to determine whether this
    # is a bigger-is-better metric or a smaller-is-better metric.  i.e. We
    # assume that the change was intentional and the new units are more
    # correct.
    # TODO: We might want to warn in the cases where units are changed, or
    # do automatic conversions where possible (such as between milliseconds
    # and nanoseconds).
    if UnitBiggerIsBetter(stats_after.unit):
        direction = -direction
    factor_range = FormatFactorRange(
        stats_before.interval, stats_after.interval
    )
    return DIRECTION_MAP[direction], factor_range


def ComparePerf(args, out_fh):
    results_maps = [
        StatsFromMultiBootDataset(MultiBootDataset(dir_path))
        for dir_path in args.results_dir
    ]

    # Set of all test case names, including those added or removed.
    labels = set()
    for results_map in results_maps:
        labels.update(results_map.keys())

    if len(results_maps) != 2:
        # Display the dataset(s) without doing any comparison.
        heading_row = ["Test case"]
        if len(results_maps) == 1:
            heading_row.extend(["Mean"])
        else:
            heading_row.extend(
                ["Mean %d" % (idx + 1) for idx in range(len(results_maps))]
            )
        rows = []
        for label in sorted(labels):
            row = [label]
            for results_map in results_maps:
                row.append(
                    StatsFormatConfidenceInterval(results_map.get(label))
                )
            rows.append(row)
        FormatTable(heading_row, rows, out_fh)
        return

    counts = {
        "added": 0,
        "removed": 0,
        "improved": 0,
        "regressed": 0,
        "no_sig_diff": 0,
        "point_estimate": 0,
    }
    heading_row = [
        "Test case",
        "Improve/regress?",
        "Factor change",
        "Mean before",
        "Mean after",
    ]
    all_rows = []
    diff_rows = []
    for label in sorted(labels):
        stats = [results_map.get(label) for results_map in results_maps]
        result, factor_range = CompareIntervals(stats[0], stats[1])
        counts[result] += 1
        row = [
            label,
            result,
            factor_range,
            StatsFormatConfidenceInterval(stats[0]),
            StatsFormatConfidenceInterval(stats[1]),
        ]
        all_rows.append(row)
        if result not in ("no_sig_diff", "point_estimate"):
            diff_rows.append(row)

    def FormatCount(count, text):
        noun = "test case" if count == 1 else "test cases"
        out_fh.write("  %d %s %s\n" % (count, noun, text))

    out_fh.write("Summary counts:\n")
    FormatCount(len(labels), "in total")
    FormatCount(
        counts["no_sig_diff"], "had no significant difference (no_sig_diff)"
    )
    if counts["point_estimate"]:
        FormatCount(
            counts["point_estimate"],
            "cannot be compared because we have point estimates only",
        )
    FormatCount(counts["improved"], "improved")
    FormatCount(counts["regressed"], "regressed")
    FormatCount(counts["added"], "added")
    FormatCount(counts["removed"], "removed")
    out_fh.write("\n\n")

    if len(diff_rows) != 0:
        out_fh.write("Results from test cases with differences:\n\n")
        FormatTable(heading_row, diff_rows, out_fh)
        out_fh.write("\n\n")

    out_fh.write("Results from all test cases:\n\n")
    FormatTable(heading_row, all_rows, out_fh)


def PrintMultibootDatasetTable(multiboot_dataset, out_fh):
    stats_map = StatsFromMultiBootDataset(multiboot_dataset)
    heading_row = ["Test case", "Mean"]
    rows = []
    for name, stats in sorted(stats_map.items()):
        rows.append([name, stats.FormatConfidenceInterval()])
    FormatTable(heading_row, rows, out_fh)


def RunLocal(args, out_fh, run_cmd):
    if glob.glob(args.iter_file) != []:
        # We check for this case so that we don't accidentally treat
        # pre-existing files the same as files newly outputted by
        # args.iter_cmd.
        raise AssertionError(
            "Temporary output file(s) %r already exist: try deleting them first"
            % args.iter_file
        )
    if os.path.exists(args.dest):
        raise AssertionError(
            "Destination path %r already exists: either delete it or use"
            " a different destination, because run_local will not"
            " overwrite it or append to it" % args.dest
        )

    by_boot_dir = os.path.join(args.dest, "by_boot")
    os.mkdir(args.dest)
    os.mkdir(by_boot_dir)

    for boot_idx in range(args.boots):
        # This prefix enables error-checking in the shell commands, for
        # both safety and convenience.
        errexit_prefix = "set -o errexit -o nounset; "
        run_cmd(errexit_prefix + args.reboot_cmd, shell=True)
        run_cmd(errexit_prefix + args.iter_cmd, shell=True)

        boot_dir = os.path.join(by_boot_dir, "boot%06d" % boot_idx)
        os.mkdir(boot_dir)
        dataset_files = sorted(glob.glob(args.iter_file))
        for idx, dataset_file in enumerate(dataset_files):
            new_filename = os.path.join(
                boot_dir, "results%06d.fuchsiaperf.json" % idx
            )
            os.rename(dataset_file, new_filename)

        # Print a table of the results so far.  This prints confidence
        # intervals, which requires having results from at least 2 boots.
        if boot_idx >= 1:
            out_fh.write("\nResults after %d boots:\n\n" % (boot_idx + 1))
            PrintMultibootDatasetTable(MultiBootDataset(args.dest), out_fh)
            out_fh.write("\n")


def IntervalsIntersect(interval1, interval2):
    return not (interval2[0] >= interval1[1] or interval2[1] <= interval1[0])


# Calculate the rate at which two intervals drawn (without replacement)
# from the given set of intervals will be non-intersecting.
def MismatchRate(intervals):
    mismatch_count = sum(
        int(not IntervalsIntersect(intervals[i], intervals[j]))
        for i in range(len(intervals))
        for j in range(i)
    )
    comparisons_count = len(intervals) * (len(intervals) - 1) / 2
    return float(mismatch_count) / comparisons_count


def ValidatePerfCompare(args, out_fh):
    boot_datasets = [
        SingleBootDataset(filename) for filename in args.results_dirs
    ]
    boot_count = len(boot_datasets)
    group_size = args.group_size
    group_count = boot_count // group_size

    results_maps = [
        StatsFromBootDatasets(
            boot_datasets[i * group_size : (i + 1) * group_size]
        )
        for i in range(group_count)
    ]

    # Group by test name (label).
    by_test = {}
    for results_map in results_maps:
        for label, stats in results_map.items():
            by_test.setdefault(label, []).append(stats)

    out_fh.write(
        "Rate of mismatches (non-intersections) "
        "of confidence intervals for each test:\n"
    )
    mismatch_rates = []
    for label, stats_list in sorted(by_test.items()):
        mismatch_rate = MismatchRate([stats.interval for stats in stats_list])
        out_fh.write("%f %s\n" % (mismatch_rate, label))
        mismatch_rates.append(mismatch_rate)

    mean_relative_ci_width = Mean(
        [
            stats.RelativeConfidenceIntervalWidth()
            for results_map in results_maps
            for stats in results_map.values()
        ]
    )

    out_fh.write("\n")
    mean_val = Mean(mismatch_rates)
    out_fh.write("Mean mismatch rate: %f\n" % mean_val)
    out_fh.write(
        "Mean relative confidence interval width: %f\n" % mean_relative_ci_width
    )
    out_fh.write("Number of test cases: %d\n" % len(mismatch_rates))
    out_fh.write(
        "Number of result sets: %d groups of %d boots each"
        " (ignoring %d leftover boots)\n"
        % (group_count, group_size, boot_count - group_size * group_count)
    )
    out_fh.write(
        "Expected number of test cases with mismatches: %f\n"
        % (mean_val * len(mismatch_rates))
    )


def Main(argv, out_fh, run_cmd=subprocess.check_call):
    parser = argparse.ArgumentParser()
    subparsers = parser.add_subparsers(required=True)

    subparser = subparsers.add_parser(
        "compare_perf",
        help="Display sets of perf test results. "
        " If given two datasets, this will compare the two, showing whether"
        " tests had regressions or improvements. "
        " Otherwise (if given 1 or >2 datasets), the data is shown with no"
        " comparisons.",
    )
    subparser.add_argument("results_dir", nargs="+")
    subparser.set_defaults(func=lambda args: ComparePerf(args, out_fh))

    subparser = subparsers.add_parser(
        "run_local",
        help="Gather a multi-boot dataset of performance test results"
        " from a single version of Fuchsia by locally running the command"
        " specified by --iter_cmd",
    )
    subparser.add_argument(
        "--boots",
        type=int,
        required=True,
        help="Number of (re)boots of Fuchsia to run",
    )
    subparser.add_argument(
        "--iter_cmd",
        required=True,
        help="Command for running a performance test. "
        " This command is run locally: it is passed to the shell. "
        " This command is expected to write its output to the file (or files)"
        " specified by --iter_file. "
        " Note that error-checking is enabled for this shell command (using"
        ' "set -o errexit -o nounset")',
    )
    subparser.add_argument(
        "--iter_file",
        required=True,
        help="File(s) that the performance test will write its results to. "
        " This is a glob expression, so it may specify multiple files. "
        " Each file is expected to be a process dataset in the"
        " *.fuchsiaperf.json format.  These files will be removed (renamed)"
        " by this tool",
    )
    subparser.add_argument(
        "--reboot_cmd",
        default="fx reboot && fx wait",
        help="Command to use for rebooting Fuchsia.  This is optional. "
        " The default is %(default)r.  As with --iter_cmd, error-checking is"
        " enabled for this shell command",
    )
    subparser.add_argument(
        "--dest",
        required=True,
        help="Destination directory for writing the multi-boot dataset",
    )
    subparser.set_defaults(func=lambda args: RunLocal(args, out_fh, run_cmd))

    subparser = subparsers.add_parser(
        "validate_perfcompare",
        help="Outputs statistics given multiple sets of perf test results"
        " that come from the same build.  This is for validating the"
        " statistics used by the perfcompare tool.  It can be used to check"
        " the rate at which the tool will falsely indicate that performance"
        " of a test case has regressed or improved.",
    )
    subparser.add_argument(
        "-g",
        "--group_size",
        type=int,
        required=True,
        help="Number of boots to put in each group.  To get realistic"
        " results that reflect how the perfcompare trybots would behave,"
        " this should match the boots_per_revision setting in the"
        " infra recipe.  (Since that code is currently not part of the"
        " Fuchsia checkout, we cannot make the settings match"
        " automatically.)",
    )
    subparser.add_argument("results_dirs", nargs="+")
    subparser.set_defaults(func=lambda args: ValidatePerfCompare(args, out_fh))

    args = parser.parse_args(argv)
    args.func(args)


if __name__ == "__main__":
    Main(sys.argv[1:], sys.stdout)