// Copyright 2016 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#ifndef DDK_DEVICE_H_
#define DDK_DEVICE_H_

#include <zircon/compiler.h>
#include <zircon/syscalls.h>
#include <zircon/types.h>
#include <zircon/listnode.h>

__BEGIN_CDECLS

typedef struct zx_device zx_device_t;
typedef struct zx_driver zx_driver_t;
typedef struct zx_device_prop zx_device_prop_t;

typedef struct zx_protocol_device zx_protocol_device_t;

typedef struct fidl_msg fidl_msg_t;
typedef struct fidl_txn fidl_txn_t;

// Max device name length, not including a null-terminator
#define ZX_DEVICE_NAME_MAX 31

// echo -n "mx_device_ops_v0.5" | sha256sum | cut -c1-16
#define DEVICE_OPS_VERSION_0_50 0xc9410d2a24f57424

// echo -n "zx_device_ops_v0.51" | sha256sum | cut -c1-16
#define DEVICE_OPS_VERSION_0_51 0xc4640f7115d2ee49

// Current Version
#define DEVICE_OPS_VERSION DEVICE_OPS_VERSION_0_51


// TODO: temporary flags used by devcoord to communicate
// with the system bus device.
#define DEVICE_SUSPEND_FLAG_REBOOT      0xdcdc0100
#define DEVICE_SUSPEND_FLAG_POWEROFF    0xdcdc0200
#define DEVICE_SUSPEND_FLAG_MEXEC       0xdcdc0300
#define DEVICE_SUSPEND_FLAG_SUSPEND_RAM 0xdcdc0400
#define DEVICE_SUSPEND_REASON_MASK      0xffffff00

// reboot modifiers
#define DEVICE_SUSPEND_FLAG_REBOOT_BOOTLOADER   (DEVICE_SUSPEND_FLAG_REBOOT | 0x01)
#define DEVICE_SUSPEND_FLAG_REBOOT_RECOVERY     (DEVICE_SUSPEND_FLAG_REBOOT | 0x02)

//@doc(docs/ddk/device-ops.md)

//@ # The Device Protocol
//
// Device drivers implement a set of hooks (methods) to support the
// operations that may be done on the devices that they publish.
//
// These are described below, including the action that is taken
// by the default implementation that is used for each hook if the
// driver does not provide its own implementation.

typedef struct zx_protocol_device {
    //@ ## version
    // This field must be set to `DEVICE_OPS_VERSION`
    uint64_t version;

    zx_status_t (*get_protocol)(void* ctx, uint32_t proto_id, void* protocol);

    //@ ## open
    // The open hook is called when a device is opened via the device filesystem,
    // or when an existing open connection to a device is cloned (for example,
    // when a device fd is shared with another process).  The default open hook,
    // if a driver does not implement one, simply returns **ZX_OK**.
    //
    // Drivers may want to implement open to disallow simultaneous access (by
    // failing if the device is already open), or to return a new **device instance**
    // instead.
    //
    // The optional *dev_out* parameter allows a device to create and return a
    // **device instance** child device, which can be used to manage per-instance
    // state instead of all client connections interacting with the device itself.
    // A child created for return as an instance **must** be created with the
    // **DEVICE_ADD_INSTANCE** flag set in the arguments to **device_add()**.
    //
    zx_status_t (*open)(void* ctx, zx_device_t** dev_out, uint32_t flags);

    //@ ## open_at
    // DEPRECATED: See ZX-3277.
    // The open_at hook is called in the event that the open path to the device
    // contains segments after the device name itself.  For example, if a device
    // exists as `/dev/misc/foo` and an attempt is made to `open("/dev/misc/foo/bar",...)`,
    // the open_at hook would be invoked with a *path* of `"bar"`.
    //
    // The default open_at implementation returns **ZX_ERR_NOT_SUPPORTED**
    //
    zx_status_t (*open_at)(void* ctx, zx_device_t** dev_out, const char* path, uint32_t flags);

    //@ ## close
    // The close hook is called when a connection to a device is closed.  These
    // calls will balance the calls to open or open_at.
    //
    // **Note:** If open or open_at return a **device instance**, the balancing close
    // hook that is called is the close hook on the **instance**, not the parent.
    //
    // The default close implementation returns **ZX_OK**.
    zx_status_t (*close)(void* ctx, uint32_t flags);

    //@ ## unbind
    // The unbind hook is called when the parent of this device is being removed (due
    // to hot unplug, fatal error, etc).  At the point unbind is called, it is not
    // possible for further open or open_at calls to occur, but io operations, etc
    // may continue until those client connections are closed.
    //
    // The driver should avoid further method calls to its parent device or any
    // protocols obtained from that device, and expect that any further such calls
    // will return with an error.
    //
    // The driver should adjust its state to encourage its client connections to close
    // (cause IO to error out, etc), and call **device_remove()** on itself when ready.
    //
    // The driver must continue to handle all device hooks until the **release** hook
    // is invoked.
    //
    void (*unbind)(void* ctx);

    //@ ## release
    // The release hook is called after this device has been removed by **device_remove()**
    // and all open client connections have been closed, and all child devices have been
    // removed and released.
    //
    // At the point release is invoked, the driver will not receive any further calls
    // and absolutely must not use the underlying **zx_device_t** or any protocols obtained
    // from that device once this method returns.
    //
    // The driver must free all memory and release all resources related to this device
    // before returning.
    void (*release)(void* ctx);

    //@ ## read
    // The read hook is an attempt to do a non-blocking read operation.
    //
    // On success *actual* must be set to the number of bytes read (which may be less
    // than the number requested in *count*), and return **ZX_OK**.
    //
    // A successful read of 0 bytes is generally treated as an End Of File notification
    // by clients.
    //
    // If no data is available now, **ZX_ERR_SHOULD_WAIT** must be returned and when
    // data becomes available `device_state_set(DEVICE_STATE_READABLE)` may be used to
    // signal waiting clients.
    //
    // This hook **must not block**.
    //
    // The default read implementation returns **ZX_ERR_NOT_SUPPORTED**.
    //
    zx_status_t (*read)(void* ctx, void* buf, size_t count,
                        zx_off_t off, size_t* actual);

    //@ ## write
    // The write hook is an attempt to do a non-blocking write operation.
    //
    // On success *actual* must be set to the number of bytes written (which may be
    // less than the number requested in *count*), and **ZX_OK** should be returned.
    //
    // If it is not possible to write data at present **ZX_ERR_SHOULD_WAIT** must
    // be returned and when it is again possible to write,
    // `device_state_set(DEVICE_STATE_WRITABLE)` may be used to signal waiting clients.
    //
    // This hook **must not block**.
    //
    // The default write implementation returns **ZX_ERR_NOT_SUPPORTED**.
    //
    zx_status_t (*write)(void* ctx, const void* buf, size_t count,
                         zx_off_t off, size_t* actual);

    //@ ## get_size
    // If the device is seekable, the get_size hook should return the size of the device.
    //
    // This is the offset at which no more reads or writes are possible.
    //
    // The default implementation returns 0.
    zx_off_t (*get_size)(void* ctx);

    //@ ## ioctl
    // The ioctl hook allows support for device-specific operations.
    //
    // These, like read and write, must not block.
    //
    // On success, **ZX_OK** must be returned and *out_actual* must be set
    // to the number of output bytes provided (0 if none).
    //
    // The default ioctl implementation returns **ZX_ERR_NOT_SUPPORTED**.
    zx_status_t (*ioctl)(void* ctx, uint32_t op,
                         const void* in_buf, size_t in_len,
                         void* out_buf, size_t out_len, size_t* out_actual);

    // Stops the device and puts it in a low power mode
    zx_status_t (*suspend)(void* ctx, uint32_t flags);

    // Restarts the device after being suspended
    zx_status_t (*resume)(void* ctx, uint32_t flags);

    //@ ## rxrpc
    // Only called for bus devices.
    // When the "shadow" of a busdev sends an rpc message, the
    // device that is shadowing is notified by the rxrpc op and
    // should attempt to read and respond to a single message on
    // the provided channel.
    //
    // Any error return from this method will result in the channel
    // being closed and the remote "shadow" losing its connection.
    //
    // This method is called with ZX_HANDLE_INVALID for the channel
    // when a new client connects -- at which point any state from
    // the previous client should be torn down.
    zx_status_t (*rxrpc)(void* ctx, zx_handle_t channel);

    //@ ## message
    // Process a FIDL rpc message.  This is used to handle class or
    // device specific messaging.  fuchsia.io.{Node,File,Device} are
    // handles by the devhost itself.
    //
    // The entire message becomes the responsibility of the driver,
    // including the handles.
    //
    // The txn provided to respond to the message is only valid for
    // the duration of the message() call.  It must not be cached
    // and used later.
    //
    // If this method returns anything other than ZX_OK, the underlying
    // connection is closed.
    zx_status_t (*message)(void* ctx, fidl_msg_t* msg, fidl_txn_t* txn);
} zx_protocol_device_t;


// Device Accessors
const char* device_get_name(zx_device_t* dev);

zx_device_t* device_get_parent(zx_device_t* dev);

// protocols look like:
// typedef struct {
//     protocol_xyz_ops_t* ops;
//     void* ctx;
// } protocol_xyz_t;
zx_status_t device_get_protocol(const zx_device_t* dev, uint32_t proto_id, void* protocol);


// Direct Device Ops Functions
zx_status_t device_read(zx_device_t* dev, void* buf, size_t count,
                        zx_off_t off, size_t* actual);

zx_status_t device_write(zx_device_t* dev, const void* buf, size_t count,
                         zx_off_t off, size_t* actual);

zx_off_t device_get_size(zx_device_t* dev);

zx_status_t device_ioctl(zx_device_t* dev, uint32_t op,
                         const void* in_buf, size_t in_len,
                         void* out_buf, size_t out_len, size_t* out_actual);

// Device Metadata Support

// retrieves metadata for a specific device
// searches parent devices to find a match
zx_status_t device_get_metadata(zx_device_t* dev, uint32_t type, void* buf, size_t buflen,
                                size_t* actual);

// retrieves metadata size for a specific device
// searches parent devices to find a match
zx_status_t device_get_metadata_size(zx_device_t* dev, uint32_t type, size_t* out_size);

// Adds metadata to a specific device.
zx_status_t device_add_metadata(zx_device_t* dev, uint32_t type, const void* data, size_t length);


// Adds metadata to be provided to future devices matching the specified topo path.
// Drivers may use this to publish metadata to a driver with a topo path that matches
// itself or one of its children. Only drivers running in the "sys" devhost may publish
// metadata to arbitrary topo paths.
zx_status_t device_publish_metadata(zx_device_t* dev, const char* path, uint32_t type,
                                    const void* data, size_t length);

// Device State Change Functions.  These match up with the signals defined in
// the fuchsia.device.Controller interface.
//
//@ #### Device State Bits
//{
#define DEV_STATE_READABLE ZX_USER_SIGNAL_0
#define DEV_STATE_WRITABLE ZX_USER_SIGNAL_2
#define DEV_STATE_ERROR    ZX_USER_SIGNAL_3
#define DEV_STATE_HANGUP   ZX_USER_SIGNAL_4
#define DEV_STATE_OOB      ZX_USER_SIGNAL_1
//}

void device_state_clr_set(zx_device_t* dev, zx_signals_t clearflag, zx_signals_t setflag);

//@ #### device_state_set
static inline void device_state_set(zx_device_t* dev, zx_signals_t stateflag) {
    device_state_clr_set(dev, 0, stateflag);
}
static inline void device_state_clr(zx_device_t* dev, zx_signals_t stateflag) {
    device_state_clr_set(dev, stateflag, 0);
}

__END_CDECLS

#endif  // DDK_DEVICE_H_