src/devices/usb/drivers/mt-musb-host/usb-hci.h

// Copyright 2019 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#ifndef SRC_DEVICES_USB_DRIVERS_MT_MUSB_HOST_USB_HCI_H_
#define SRC_DEVICES_USB_DRIVERS_MT_MUSB_HOST_USB_HCI_H_

#include <lib/device-protocol/pdev.h>
#include <lib/mmio/mmio.h>
#include <lib/zx/interrupt.h>

#include <array>
#include <memory>
#include <optional>
#include <thread>

#include <ddktl/device.h>
#include <ddktl/protocol/usb/bus.h>
#include <ddktl/protocol/usb/hci.h>

#include "usb-device.h"
#include "usb-root-hub.h"

namespace mt_usb_hci {

// The USB device id of the root hub.
constexpr uint32_t kRootHubId = 128;

// This corresponds to the 127 hardware-supported devices, the logical root-hub, and a reserved
// device-0 address used for enumeration.  Device addresses 0 and 128 are reserved for enumeration
// and the logical root-hub.
constexpr int kMaxDevices = 129;

class UsbHci;
using DeviceType = ddk::Device<UsbHci, ddk::Unbindable>;

// UsbHci provides the USB-HCI implementation.
class UsbHci : public DeviceType, public ddk::UsbHciProtocol<UsbHci, ddk::base_protocol> {
 public:
  explicit UsbHci(zx_device_t* parent, ddk::MmioBuffer&& usb_mmio, ddk::MmioBuffer&& phy_mmio,
                  zx_handle_t irq)
      : DeviceType(parent),
        usb_mmio_(std::move(usb_mmio)),
        phy_mmio_(std::move(phy_mmio)),
        irq_(irq) {}

  ~UsbHci() = default;

  // Assign, copy, and move are disallowed.
  UsbHci(UsbHci&&) = delete;
  UsbHci& operator=(UsbHci&&) = delete;

  static zx_status_t Create(void* ctx, zx_device_t* parent);

  // Device protocol implementation.
  void DdkUnbind(ddk::UnbindTxn txn);
  void DdkRelease();

  // USB HCI protocol implementation.
  void UsbHciRequestQueue(usb_request_t* usb_request, const usb_request_complete_t* complete_cb);
  void UsbHciSetBusInterface(const usb_bus_interface_protocol_t* bus_intf);
  size_t UsbHciGetMaxDeviceCount();
  zx_status_t UsbHciEnableEndpoint(uint32_t device_id, const usb_endpoint_descriptor_t* desc,
                                   const usb_ss_ep_comp_descriptor_t* ss_com_desc, bool enable);
  uint64_t UsbHciGetCurrentFrame();
  zx_status_t UsbHciConfigureHub(uint32_t device_id, usb_speed_t speed,
                                 const usb_hub_descriptor_t* desc, bool multi_tt);
  zx_status_t UsbHciHubDeviceAdded(uint32_t device_id, uint32_t port, usb_speed_t speed);
  zx_status_t UsbHciHubDeviceRemoved(uint32_t device_id, uint32_t port);
  zx_status_t UsbHciHubDeviceReset(uint32_t device_id, uint32_t port);
  zx_status_t UsbHciResetEndpoint(uint32_t device_id, uint8_t ep_address);
  zx_status_t UsbHciResetDevice(uint32_t hub_address, uint32_t device_id);
  size_t UsbHciGetMaxTransferSize(uint32_t device_id, uint8_t ep_address);
  zx_status_t UsbHciCancelAll(uint32_t device_id, uint8_t ep_address);
  size_t UsbHciGetRequestSize();

 protected:
  // Initialize the USB HCI.
  zx_status_t Init();

 private:
  ddk::MmioBuffer* usb_mmio() { return &usb_mmio_; }
  ddk::MmioBuffer* phy_mmio() { return &phy_mmio_; }
  UsbRootHub* root_hub() { return static_cast<UsbRootHub*>(device_[kRootHubId].get()); }

  // Initialize the given USB HCI sub-fragments.
  zx_status_t InitPhy();
  zx_status_t InitRootHub();
  zx_status_t InitEndpointControllers();

  // Start a USB session.
  void StartSession();

  // USB interrupt service routines.
  void HandleIrq();
  void HandleConnect();
  void HandleDisconnect();
  void HandleEndpoint(uint8_t ep);
  int IrqThread();

  // The usb register mmio.
  ddk::MmioBuffer usb_mmio_;

  // The usb phy register mmio.
  ddk::MmioBuffer phy_mmio_;

  // The system USB-common interrupt.  See MUSBMHDRC section 13.2.
  zx::interrupt irq_;

  // An async. thread responding to USB-common interrupt events.
  std::thread irq_thread_;

  // The USB-bus device, used to announce new physical devices to the upper USB stack.
  ddk::UsbBusInterfaceProtocolClient bus_;

  // This is an array of UsbDevice unique_ptrs indexed by device_id.  Note that device_[0] is
  // reserved and should not be used.  Additionally, device_[128] is reserved for the logical usb
  // root-hub device.
  std::array<std::unique_ptr<UsbDevice>, kMaxDevices> device_;

  // The count of supported RX/TX endpoints in the design.
  int rx_ep_count_;
  int tx_ep_count_;
};

}  // namespace mt_usb_hci

#endif  // SRC_DEVICES_USB_DRIVERS_MT_MUSB_HOST_USB_HCI_H_