// Copyright 2016 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include <ddk/binding.h>
#include <ddk/debug.h>
#include <ddk/device.h>
#include <ddk/driver.h>
#include <hw/inout.h>
#include <librtc.h>

#include <fuchsia/hardware/rtc/c/fidl.h>
#include <zircon/syscalls.h>
#include <zircon/types.h>

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <threads.h>

#define RTC_IO_BASE 0x70
#define RTC_NUM_IO_REGISTERS 8

#define RTC_IDX_REG 0x70
#define RTC_DATA_REG 0x71

#define RTC_HOUR_PM_BIT 0x80

static mtx_t lock = MTX_INIT;

enum intel_rtc_registers {
    REG_SECONDS,
    REG_SECONDS_ALARM,
    REG_MINUTES,
    REG_MINUTES_ALARM,
    REG_HOURS,
    REG_HOURS_ALARM,
    REG_DAY_OF_WEEK,
    REG_DAY_OF_MONTH,
    REG_MONTH,
    REG_YEAR,
    REG_A,
    REG_B,
    REG_C,
    REG_D,
};

enum intel_rtc_register_a {
    REG_A_UPDATE_IN_PROGRESS_BIT = 1 << 7,
};

enum intel_rtc_register_b {
    REG_B_DAYLIGHT_SAVINGS_ENABLE_BIT = 1 << 0,
    REG_B_HOUR_FORMAT_BIT = 1 << 1,
    REG_B_DATA_MODE_BIT = 1 << 2,
    REG_B_SQUARE_WAVE_ENABLE_BIT = 1 << 3,
    REG_B_UPDATE_ENDED_INTERRUPT_ENABLE_BIT = 1 << 4,
    REB_B_ALARM_INTERRUPT_ENABLE_BIT = 1 << 5,
    REG_B_PERIODIC_INTERRUPT_ENABLE_BIT = 1 << 6,
    REG_B_UPDATE_CYCLE_INHIBIT_BIT = 1 << 7,
};

static uint8_t read_reg_raw(enum intel_rtc_registers reg) {
    outp(RTC_IDX_REG, reg);
    return inp(RTC_DATA_REG);
}

static void write_reg_raw(enum intel_rtc_registers reg, uint8_t val) {
    outp(RTC_IDX_REG, reg);
    outp(RTC_DATA_REG, val);
}

static uint8_t read_reg(enum intel_rtc_registers reg, bool reg_is_binary) {
    uint8_t data = read_reg_raw(reg);
    return reg_is_binary ? data : from_bcd(data);
}

static void write_reg(enum intel_rtc_registers reg, uint8_t val, bool reg_is_binary) {
    write_reg_raw(reg, reg_is_binary ? val : to_bcd(val));
}

// The high bit (RTC_HOUR_PM_BIT) is special for hours when not using
// the 24 hour time encoding. In that case, it is set for PM and unset
// for AM. This is true for both BCD and binary encodings of the
// value, so it has to be masked out first.

static uint8_t read_reg_hour(bool reg_is_binary, bool reg_is_24_hour) {
    uint8_t data = read_reg_raw(REG_HOURS);

    bool pm = data & RTC_HOUR_PM_BIT;
    data &= ~RTC_HOUR_PM_BIT;

    uint8_t hour = reg_is_binary ? data : from_bcd(data);

    if (reg_is_24_hour) {
        return hour;
    }

    if (pm) {
        hour += 12;
    }

    // Adjust noon and midnight.
    switch (hour) {
    case 24: // 12 PM
        return 12;
    case 12: // 12 AM
        return 0;
    default:
        return hour;
    }
}

static void write_reg_hour(uint8_t hour, bool reg_is_binary, bool reg_is_24_hour) {
    bool pm = hour > 11;

    if (!reg_is_24_hour) {
        if (pm) {
            hour -= 12;
        }
        if (hour == 0) {
            hour = 12;
        }
    }

    uint8_t data = reg_is_binary ? hour : to_bcd(hour);

    if (pm && !reg_is_24_hour) {
        data |= RTC_HOUR_PM_BIT;
    }

    write_reg_raw(REG_HOURS, data);
}

static zx_status_t set_utc_offset(const fuchsia_hardware_rtc_Time* rtc) {
    uint64_t rtc_nanoseconds = seconds_since_epoch(rtc) * 1000000000;;
    int64_t offset = rtc_nanoseconds - zx_clock_get_monotonic();
    // Please do not use get_root_resource() in new code. See ZX-1467.
    return zx_clock_adjust(get_root_resource(), ZX_CLOCK_UTC, offset);
}

// Retrieve the hour format and data mode bits. Note that on some
// platforms (including the acer) these bits can not be reliably
// written. So we must instead parse and provide the data in whatever
// format is given to us.
static void rtc_mode(bool* reg_is_24_hour, bool* reg_is_binary) {
    uint8_t reg_b = read_reg_raw(REG_B);
    *reg_is_24_hour = reg_b & REG_B_HOUR_FORMAT_BIT;
    *reg_is_binary = reg_b & REG_B_DATA_MODE_BIT;
}

static void read_time(fuchsia_hardware_rtc_Time* rtc) {
    mtx_lock(&lock);
    bool reg_is_24_hour;
    bool reg_is_binary;
    rtc_mode(&reg_is_24_hour, &reg_is_binary);

    rtc->seconds = read_reg(REG_SECONDS, reg_is_binary);
    rtc->minutes = read_reg(REG_MINUTES, reg_is_binary);
    rtc->hours = read_reg_hour(reg_is_binary, reg_is_24_hour);

    rtc->day = read_reg(REG_DAY_OF_MONTH, reg_is_binary);
    rtc->month = read_reg(REG_MONTH, reg_is_binary);
    rtc->year = read_reg(REG_YEAR, reg_is_binary) + 2000;

    mtx_unlock(&lock);
}

static void write_time(const fuchsia_hardware_rtc_Time* rtc) {
    mtx_lock(&lock);
    bool reg_is_24_hour;
    bool reg_is_binary;
    rtc_mode(&reg_is_24_hour, &reg_is_binary);

    write_reg_raw(REG_B, read_reg_raw(REG_B) | REG_B_UPDATE_CYCLE_INHIBIT_BIT);

    write_reg(REG_SECONDS, rtc->seconds, reg_is_binary);
    write_reg(REG_MINUTES, rtc->minutes, reg_is_binary);
    write_reg_hour(rtc->hours, reg_is_binary, reg_is_24_hour);

    write_reg(REG_DAY_OF_MONTH, rtc->day, reg_is_binary);
    write_reg(REG_MONTH, rtc->month, reg_is_binary);
    write_reg(REG_YEAR, rtc->year - 2000, reg_is_binary);

    write_reg_raw(REG_B, read_reg_raw(REG_B) & ~REG_B_UPDATE_CYCLE_INHIBIT_BIT);

    mtx_unlock(&lock);
}

static zx_status_t intel_rtc_get(void* ctx, fuchsia_hardware_rtc_Time* rtc) {
    // Ensure we have a consistent time.
    fuchsia_hardware_rtc_Time prev;
    do {
        // Using memcpy, as we use memcmp to compare.
        memcpy(&prev, rtc, sizeof prev);
        read_time(rtc);
    } while (memcmp(rtc, &prev, sizeof prev));
    return ZX_OK;
}

static zx_status_t intel_rtc_set(void* ctx, const fuchsia_hardware_rtc_Time* rtc) {
    // An invalid time was supplied.
    if (rtc_is_invalid(rtc)) {
        return ZX_ERR_OUT_OF_RANGE;
    }

    write_time(rtc);
    // TODO(kulakowski) This isn't the place for this long term.
    zx_status_t status = set_utc_offset(rtc);
    if (status != ZX_OK) {
        zxlogf(ERROR, "The RTC driver was unable to set the UTC clock!\n");
    }
    return ZX_OK;
}

static zx_status_t fidl_Get(void* ctx, fidl_txn_t* txn) {
    fuchsia_hardware_rtc_Time rtc;
    intel_rtc_get(ctx, &rtc);
    return fuchsia_hardware_rtc_DeviceGet_reply(txn, &rtc);
}

static zx_status_t fidl_Set(void* ctx, const fuchsia_hardware_rtc_Time* rtc, fidl_txn_t* txn) {
    zx_status_t status = intel_rtc_set(ctx, rtc);
    return fuchsia_hardware_rtc_DeviceSet_reply(txn, status);
}

static fuchsia_hardware_rtc_Device_ops_t fidl_ops = {
    .Get = fidl_Get,
    .Set = fidl_Set,
};

static zx_status_t intel_rtc_message(void* ctx, fidl_msg_t* msg, fidl_txn_t* txn) {
    return fuchsia_hardware_rtc_Device_dispatch(ctx, txn, msg, &fidl_ops);
}

static zx_protocol_device_t intel_rtc_device_proto __UNUSED = {
    .version = DEVICE_OPS_VERSION,
    .message = intel_rtc_message
};

//TODO: bind against hw, not misc
static zx_status_t intel_rtc_bind(void* ctx, zx_device_t* parent) {
#if defined(__x86_64__) || defined(__i386__)
    // TODO(teisenbe): This should be probed via the ACPI pseudo bus whenever it
    // exists.

    // Please do not use get_root_resource() in new code. See ZX-1467.
    zx_status_t status = zx_ioports_request(get_root_resource(), RTC_IO_BASE, RTC_NUM_IO_REGISTERS);
    if (status != ZX_OK) {
        return status;
    }

    device_add_args_t args = {
        .version = DEVICE_ADD_ARGS_VERSION,
        .name = "rtc",
        .ops = &intel_rtc_device_proto,
        .proto_id = ZX_PROTOCOL_RTC
    };

    zx_device_t* dev;
    status = device_add(parent, &args, &dev);
    if (status != ZX_OK) {
        return status;
    }

    fuchsia_hardware_rtc_Time rtc;
    sanitize_rtc(NULL, &rtc, intel_rtc_get, intel_rtc_set);
    status = set_utc_offset(&rtc);
    if (status != ZX_OK) {
        zxlogf(ERROR, "The RTC driver was unable to set the UTC clock!\n");
    }

    return ZX_OK;
#else
    return ZX_ERR_NOT_SUPPORTED;
#endif
}

static zx_driver_ops_t intel_rtc_driver_ops = {
    .version = DRIVER_OPS_VERSION,
    .bind = intel_rtc_bind,
};

ZIRCON_DRIVER_BEGIN(intel_rtc, intel_rtc_driver_ops, "zircon", "0.1", 6)
    BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_ACPI),
    BI_GOTO_IF(NE, BIND_ACPI_HID_0_3, 0x504e5030, 0), // PNP0B00\0
    BI_MATCH_IF(EQ, BIND_ACPI_HID_4_7, 0x42303000),
    BI_LABEL(0),
    BI_ABORT_IF(NE, BIND_ACPI_CID_0_3, 0x504e5030), // PNP0B00\0
    BI_MATCH_IF(EQ, BIND_ACPI_CID_4_7, 0x42303000),
ZIRCON_DRIVER_END(intel_rtc)