# Copyright 2019 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# TECHNICAL NOTE:
#
# This file is used to build the sysroot directories used to build C++,
# Rust and Go binaries with the Fuchsia build system.
#
# A "sysroot" is a directory that should provide system headers, libraries
# and support files for a given target system. In the case of Fuchsia,
# its layout will look like:
#
#   include/
#     # C library and Zircon VDSO headers.
#
#   lib/
#     libc.so
#     libdl.so
#     libm.so
#     libpthread.so
#     librt.so
#     libzircon.so
#     Scrt1.o
#
# When building Fuchsia binaries, the sysroot is passed to the final linker
# (i.e. 'lld') with the '--sysroot=<dir>' argument, which has the following
# effect:
#
#   - Adding the $SYSROOT/lib directory at the end of the library search
#     path. This allows linker arguments like '-lc' or '-lzircon' to
#     work properly.
#
#   - When generating an executable, the linker will, by default, inject
#     the $SYSROOT/lib/Scrt1.o to the link.
#
# NOTE: The 'libdl.so', 'libm.so', 'libpthread.so' and 'librt.so' libraries
# are "legacy" system libraries, because all their APIs are implemented
# by 'libc.so' on Fuchsia. However, some of our third_party targets expect
# them to be available (e.g. when their BUILD.gn file adds explicit '-lm'
# linker flags to link to the Math library, or the Go compiler will inject
# an '-lpthread' when calling the linker). To support these, we create
# them as empty linker scripts.
#
# Each sysroot is toolchain-specific (because the C library must always be
# built with a variant that is compatible with the current toolchain instance
# used to build Fuchsia user binaries).
#
# To avoid too much duplicate work and copies, each sysroot directory is
# created as follows:
#
#  - A common include/ directory is created in a special GN toolchain
#    instance (//build/zircon:sysroot_toolchain), which contains all
#    C library and VDSO headers.
#
#  - Each '$SYSROOT/include' contains a copy of the headers listed by
#    various sysroot_entries.gni files in our build, which define
#    sysroot_FOO_entries lists of scopes describing a part of the
#    sysroot content.
#
#  - Files under '$SYSROOT/lib' are all tiny linker scripts that are either
#    empty, or redirect to the right library binary, whose path depends
#    on the current toolchain variant. For example, when in the
#    //build/toolchain/fuchsia:x64-asan-ubsan toolchain, libc.so would
#    redirect to 'user.libc_x64/-asan-ubsan/libc.so.debug' (where '.debug'
#    means this is the unstripped version).
#
#    The non-empty linker scripts are created through a generated_file()
#    target that depends on the destination library target.
#
# Note that C++, Rust and Go require different content in their sysroot:
#
#  - Go requires the paths used in linker scripts to be absolute, because
#    building Go binaries requires running the "go" tool in a
#    target-specific directory.
#
#    C++ and Rust do not require this, so relative paths are used instead
#    to help keep the build more hermetic.
#
#  - Rust requires an empty $SYSROOT/lib/Scrt1.o linker stub. Otherwise,
#    the file will be added twice to the 'lld' command invoked by the 'rustc'
#    compiler. This is due to the way GN computes native dependencies for
#    Rust targets.
#
#    The C++ compiler also requires it by default. Technically, this could
#    be  omitted by adding '-nostartfiles' to the ldflags of the
#    //build/config/fuchsia:compiler_sysroot config. But using an
#    empty file instead is less complicated and more consistent with
#    the Rust case.
#
#    The Go compiler absolutely requires a valid Scrt1.o file though,
#    so one redirection linker stub is generated instead.
#

import("//zircon/system/ulib/c/libc_toolchain.gni")
import("cpp.gni")
import("go.gni")

# Import the scope definitions that list all sysroot headers.
import("//src/zircon/lib/zircon/sysroot_entries.gni")
import("//zircon/system/ulib/c/sysroot_entries.gni")
sysroot_entries =
    sysroot_uninstrumented_libc_entries + sysroot_instrumented_libc_entries +
    sysroot_crt1_entries + sysroot_vdso_entries

# Write sysroot_entries to a JSON file that will get parsed
# by our populate_sysroot_headers.py script below, since using it
# is faster than creating hundred of copy() targets in each toolchain,
# and ensures the destination directory is cleaned up from stale header
# files from a previous build.
sysroot_entries_json_file = "$root_out_dir/sysroot-entries.json"

generated_file("sysroot-entries-json") {
  visibility = [ ":*" ]
  contents = sysroot_entries
  outputs = [ sysroot_entries_json_file ]
  output_conversion = "json"
}

# Parse the sysroot_entries list of scopes.
#
# For historical reasons, only the scopes with an `sdk` key are considered
# here. Each value associated with an `sdk` key is a scope itself, with the
# following schema:
#
# If `include_dir` is present then:
#
#   include_dir (optional)
#     [GN path] A GN path to a subdirectory containing zero or more headers
#     to copy to the sysroot's include directory.
#
#   headers (optional)
#     [list of paths] Required if `include_dir` is specified, ignored otherwise.
#     A list of header sub-paths, relative to `include_dir`, that must be
#     copied to the sysroot directory.
#
#   no_export (optional)
#     [boolean] Ignored if `include_dir` is not used. A flag that is set to
#     indicate that the set of headers described in the current entry should
#     not be exported to the SDK sysroot (though they will still be copied
#     to the platform's sysroot). This is useful for <zircon/device/*.h>
#     headers, as well as `cdecls-next.inc` and `testonly-cdecls.inc`.
#
# Otherwise, if `include_dir` is _not_ present:
#
#   source (optional)
#     [path] A path, relative to the current root build directory, where
#     to find the source file to be copied into the sysroot, where destination
#     is specified by one of the ` link`, `debug` or `dist` keys described
#     below. Ignored if `include_dir` is present.
#
#   debug (optional)
#   dist (optional)
#   link (optional)
#     [path] A path relative to the sysroot directory, that specifies where
#     the `source` file needs to be copied into the SDK. Only one of these
#     keys can be used per entry. For the platform SDK, onle `dist` and `link`
#     are used. The SDK sysroot will use all three though.
#
#   deps (optional)
#     [list of labels] A list of labels to dependencies for this entry,
#     this should correspond to the GN target that built the `source`
#     file, once the sysroot generation is moved to the Fuchsia build.
#
# IMPORTANT: The populate_sysroot_headers.py script in this directory relies
# on this exact schema definition. Keep it in sync if the schema changes!
#
sysroot_headers = []
sysroot_headers_deps = []
foreach(entry, sysroot_entries) {
  if (defined(entry.sdk)) {
    sdk = {
    }
    sdk = entry.sdk
    if (defined(sdk.headers)) {
      dir = rebase_path(sdk.include_dir, "", root_build_dir)
      foreach(file, sdk.headers) {
        sysroot_headers += [ "include/$file" ]
        if (defined(sdk.deps)) {
          sysroot_headers_deps += sdk.deps
        }
      }
    }
  }
}

# An additional dependency for executable() Fuchsia user binaries. It adds
# the C runtime startup object code.
group("crt1_deps") {
  deps = [ "//zircon/system/ulib/c:crt1" ]
}

# Internal template used to populate a language-specific sysroot directory.
# The content will be customized according to misc arguments described below
# to meet the needs of the C++, Rust and Go compilers.
#
# This will populate 'sysroot_dir' with an 'include' symlink, and a 'lib'
# directory containing linker stubs or dummy files. See technical note
# above for details.
#
# Arguments
#  sysroot_dir (required)
#    [GN path] Path to the destination directory to populate.
#
#  absolute_stub_paths (optional)
#    [boolean] Set to true to use absolute paths in linker redirection
#    stubs. This is required for the Go sysroot.
#
#  add_crt1 (optional)
#    [boolean] Set to true to create an Scrt1.o linker stub that
#    redirects to the actual file. By default this creates an empty
#    file, and it is up to the caller to add the right dependency to
#    the actual object through "crt1_deps" above.
#
template("_create_sysroot") {
  prefix = target_name

  assert(defined(invoker.sysroot_dir),
         "sysroot_dir must be defined when calling this template")
  _sysroot_dir = invoker.sysroot_dir

  _libc_target = sysroot_libc_stub_target
  _libc_file = rebase_path(sysroot_libc_stub, root_build_dir)

  _vdso_target = "//src/zircon/lib/zircon:zircon.stub($default_toolchain)"
  _vdso_path = get_label_info(_vdso_target, "root_out_dir") + "/libzircon.so"

  _crt1_file = rebase_path(sysroot_crt1_obj, root_build_dir)

  if (defined(invoker.absolute_stub_paths) && invoker.absolute_stub_paths) {
    _libc_file = rebase_path(_libc_file, "", root_build_dir)
    _crt1_file = rebase_path(_crt1_file, "", root_build_dir)
  }

  # Generate a '$sysroot_dir/include' directory.
  #
  # This simply copies the common sysroot directory from
  # $root_build_dir/sysroot_toolchain/sysroot/include into
  # $sysroot_dir/include.
  #
  # NOTE: This used to be a simple symlink creation, but a recent upstream
  # GN change prevents using this technique, because it ruins the Ninja no-op
  # rebuild check.
  #
  # For more context, upstream GN used to get rid of action() timestamp files,
  # but this got recently reverted due to some issues with the Chrome build.
  #
  # Timestamp files prevent symlinking directories properly, because Ninja uses
  # stat() to get a directory's timestamp, which will return the symlink's target
  # timestamp instead (see https://github.com/ninja-build/ninja/issues/1186).
  #
  # When GN gets rid of timestamp files again, a simple symlink will be
  # enough. For now, the symptoms are:
  #
  #  - On the first fx build, the common sysroot is created under
  #    $root_build_dir/sysroot_toolchain/sysroot/include by the action("headers")
  #    below, in the $sysroot_toolchain toolchain.
  #
  #    GN also tells Ninja to generate a timestamp file for this action as
  #    $root_build_dir/sysroot_toolchain/obj/zircon/public/sysroot/headers.stamp
  #
  #  - A symlink is created by the action() below from $sysroot_dir/include to
  #    the common sysroot. The build completes successfully.
  #
  #  - On the next 'ninja' invokation, the tool will determine that the timestamp
  #    value for $sysroot_dir/include is that of its target, not that of the
  #    symlink itself (see https://github.com/ninja-build/ninja/issues/1186).
  #
  #    It will then determine that this value is older than the value for
  #    the timestamp file (i.e. .../headers.stamp), which it depends on
  #    and then needs to be rebuilt!!
  #
  action("${prefix}_headers") {
    # TODO(fxbug.dev/69028): self-caching outputs is intended populate_sysroot_headers.py

    inputs = [ sysroot_entries_json_file ]
    outputs = []
    foreach(header, sysroot_headers) {
      outputs += [ "${_sysroot_dir}/$header" ]
    }
    script = "populate_sysroot_headers.py"
    depfile = "$target_gen_dir/${prefix}_headers.d"
    args = [
      "--src-dir",
      rebase_path("//", root_build_dir),
      "--sysroot-json",
      rebase_path(inputs[0], root_build_dir),
      "--sysroot-dir",
      rebase_path(_sysroot_dir, root_build_dir),
      "--dep-file",
      rebase_path(depfile, root_build_dir),

      # The --debug flag can be used to print the script's operations for debugging.
      #"--debug",
    ]
    deps = [ ":sysroot-entries-json" ] + sysroot_headers_deps

    visibility = [ ":*" ]
  }

  _sysroot_deps = [ ":${prefix}_headers" ]

  # Generate a linker file redirecting to the C library.
  generated_file("${prefix}_libc") {
    _relative_libc_file =
        rebase_path("$_libc_file", _sysroot_dir, root_build_dir)
    outputs = [ "$_sysroot_dir/lib/libc.so" ]
    contents = [ "INPUT(=$_relative_libc_file)" ]
    deps = [ _libc_target ]
  }
  _sysroot_deps += [ ":${prefix}_libc" ]

  # Generate a linker file redirecting to the Zircon VDSO
  copy("${prefix}_libzircon") {
    outputs = [ "$_sysroot_dir/lib/libzircon.so" ]
    sources = [ _vdso_path ]
    deps = [ _vdso_target ]
  }
  _sysroot_deps += [ ":${prefix}_libzircon" ]

  # Generate empty linker stubs for legacy system libraries that
  # some compilers or runtimes depend on. Their APIs are implemented
  # by the C library anyway.
  foreach(stub,
          [
            "libdl",
            "libm",
            "libpthread",
            "librt",
          ]) {
    generated_file("${prefix}_${stub}") {
      outputs = [ "$_sysroot_dir/lib/${stub}.so" ]
      contents = [ "/* EMPTY */" ]
    }
    _sysroot_deps += [ ":${prefix}_${stub}" ]
  }

  # Generate a linker file redirecting to the C runtime startup object
  # or is empty, depending on invoker.add_crt1.
  generated_file("${prefix}_crt1") {
    outputs = [ "$_sysroot_dir/lib/Scrt1.o" ]
    if (defined(invoker.add_crt1) && invoker.add_crt1) {
      _relative_crt1_file =
          rebase_path("$_crt1_file", _sysroot_dir, root_build_dir)
      contents = [ "INPUT(=$_relative_crt1_file)" ]
      deps = [ sysroot_crt1_target ]
    } else {
      contents = [ "/* EMPTY */" ]
      not_needed([ "_crt1_file" ])
    }
  }

  _sysroot_deps += [ ":${prefix}_crt1" ]

  # The parent group() that depends on everything else.
  group(target_name) {
    deps = _sysroot_deps
    if (defined(invoker.deps)) {
      deps += invoker.deps
    }

    if (defined(invoker.data_deps)) {
      data_deps = invoker.data_deps
    }
  }
}

# Create the sysroot directory used by the C++ compiler.
# Any Fuchsia binary target must depend on this target to be able
# to include C library and VDSO headers, as well as link ELF shared
# libraries or executables.
#
# Note that executables should also depend on the 'crt1_deps' target
# to get the proper dependency on the C runtime startup object
# (the one created in this sysroot is intentionally empty).
#
_create_sysroot("cpp_binary_deps") {
  sysroot_dir = cpp_sysroot_dir
  deps = [ "//zircon/system/ulib/c" ]
  data_deps = [ sysroot_libc_target ]
}

# Rust compilation can now use the C++ sysroot directly, so just
# redirect to the corresponding target. If you change this, don't
# forget to update sysroot_rust.gni as well.
group("rust_binary_deps") {
  deps = [ ":cpp_binary_deps" ]
}

# Create the sysroot directory used by the Go compiler.
#
# Note that this does include an Scrt1.o linker stub that redirects and
# depends on the real file, so Go executables should _not_ depend on
# 'crt1_deps' at all.
#
_create_sysroot("go_binary_deps") {
  sysroot_dir = go_sysroot_dir
  add_crt1 = true
  absolute_stub_paths = true
  deps = [ "//zircon/system/ulib/c" ]
  data_deps = [ sysroot_libc_target ]
}

# Depend on this to only require the Zircon headers, but not link to the
# C library or Zircon VDSO. Should only be used for source_set() and
# static_library() targets.
group("headers") {
  # Only depend on the target that creates the include directory.
  deps = [ ":cpp_binary_deps_headers" ]
}

# A special dependency that ensures that the uninstrumented C library is
# available in the system package as /lib/ld.so.1. For more details read
# //zircon/system/ulib/c/libc_toolchain.gni
#
# In practice, should only be used to build the system package, and some
# prebuilt driver packages.
group("system_libc_deps") {
  public_deps = [ system_libc_target ]
}