// Copyright 2016 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#ifndef SYSROOT_ZIRCON_DEVICE_BLOCK_H_
#define SYSROOT_ZIRCON_DEVICE_BLOCK_H_

#include <assert.h>
#include <limits.h>
#include <zircon/device/ioctl-wrapper.h>
#include <zircon/device/ioctl.h>
#include <zircon/types.h>

// Get information about the underlying block device.
#define IOCTL_BLOCK_GET_INFO \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 1)
// Get the type GUID of the partition (if one exists)
#define IOCTL_BLOCK_GET_TYPE_GUID \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 2)
// Get the GUID of the partition (if one exists)
#define IOCTL_BLOCK_GET_PARTITION_GUID \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 3)
// Get the name of the partition (if one exists)
#define IOCTL_BLOCK_GET_NAME \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 4)
// Rebind the block device (if supported)
#define IOCTL_BLOCK_RR_PART \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 5)
// Set up a FIFO-based server on the block device; acquire the handle to it
#define IOCTL_BLOCK_GET_FIFOS \
    IOCTL(IOCTL_KIND_GET_HANDLE, IOCTL_FAMILY_BLOCK, 6)
// Attach a VMO to the currently running FIFO server
#define IOCTL_BLOCK_ATTACH_VMO \
    IOCTL(IOCTL_KIND_SET_HANDLE, IOCTL_FAMILY_BLOCK, 7)
// Shut down the fifo server, waiting for it to be ready to be started again.
// Only necessary to guarantee availability to the next fifo server client;
// otherwise, closing the client fifo is sufficient to shut down the server.
#define IOCTL_BLOCK_FIFO_CLOSE \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 10)
// Prints stats about the block device to the provided buffer and optionally
// clears the counters
#define IOCTL_BLOCK_GET_STATS \
    IOCTL(IOCTL_KIND_DEFAULT, IOCTL_FAMILY_BLOCK, 18)

// Block Impl ioctls (specific to each block device):

#define BLOCK_FLAG_READONLY 0x00000001
#define BLOCK_FLAG_REMOVABLE 0x00000002
#define BLOCK_FLAG_BOOTPART 0x00000004 // block device has bootdata partition map
                                       // provided by device metadata

#define BLOCK_MAX_TRANSFER_UNBOUNDED 0xFFFFFFFF

typedef struct {
    uint64_t block_count;       // The number of blocks in this block device
    uint32_t block_size;        // The size of a single block
    uint32_t max_transfer_size; // Max size in bytes per transfer.
                                // May be BLOCK_MAX_TRANSFER_UNBOUNDED if there
                                // is no restriction.
    uint32_t flags;
    uint32_t reserved;
} block_info_t;

typedef struct {
    size_t total_ops;    // Total number of block ops processed
    size_t total_blocks; // Total number of blocks processed
    size_t total_reads;
    size_t total_blocks_read;
    size_t total_writes;
    size_t total_blocks_written;
} block_stats_t;

// ssize_t ioctl_block_get_info(int fd, block_info_t* out);
IOCTL_WRAPPER_OUT(ioctl_block_get_info, IOCTL_BLOCK_GET_INFO, block_info_t)

// ssize_t ioctl_block_get_type_guid(int fd, void* out, size_t out_len);
IOCTL_WRAPPER_VAROUT(ioctl_block_get_type_guid, IOCTL_BLOCK_GET_TYPE_GUID, void)

// ssize_t ioctl_block_get_partition_guid(int fd, void* out, size_t out_len);
IOCTL_WRAPPER_VAROUT(ioctl_block_get_partition_guid, IOCTL_BLOCK_GET_PARTITION_GUID, void)

// ssize_t ioctl_block_get_name(int fd, char* out, size_t out_len);
IOCTL_WRAPPER_VAROUT(ioctl_block_get_name, IOCTL_BLOCK_GET_NAME, char)

// ssize_t ioctl_block_rr_part(int fd);
IOCTL_WRAPPER(ioctl_block_rr_part, IOCTL_BLOCK_RR_PART)

// TODO(smklein): Move these to a separate file
// Block Device ioctls (shared between all block devices):

// ssize_t ioctl_block_get_fifos(int fd, zx_handle_t* fifo_out);
IOCTL_WRAPPER_OUT(ioctl_block_get_fifos, IOCTL_BLOCK_GET_FIFOS, zx_handle_t)

typedef uint16_t vmoid_t;

// Dummy vmoid value reserved for "invalid". Will never be allocated; can be
// used as a local value for unallocated / freed ID.
#define VMOID_INVALID 0

// ssize_t ioctl_block_attach_vmo(int fd, zx_handle_t* in, vmoid_t* out_vmoid);
IOCTL_WRAPPER_INOUT(ioctl_block_attach_vmo, IOCTL_BLOCK_ATTACH_VMO, zx_handle_t, vmoid_t)

// ssize_t ioctl_block_fifo_close(int fd);
IOCTL_WRAPPER(ioctl_block_fifo_close, IOCTL_BLOCK_FIFO_CLOSE)

#define GUID_LEN 16
#define NAME_LEN 24
#define MAX_FVM_VSLICE_REQUESTS 16

typedef struct {
    size_t slice_count;
    uint8_t type[GUID_LEN];
    uint8_t guid[GUID_LEN];
    char name[NAME_LEN];
    uint32_t flags; // Refer to fvm.h for options here; default is zero.
} alloc_req_t;

typedef struct {
    size_t offset; // Both in units of "slice". "0" = slice 0, "1" = slice 1, etc...
    size_t length;
} extend_request_t;

typedef struct {
    size_t count;                                 // number of elements in vslice_start
    size_t vslice_start[MAX_FVM_VSLICE_REQUESTS]; // vslices to query from
} query_request_t;

// ssize_t ioctl_block_get_stats(int fd, bool clear, block_stats_t* out)
IOCTL_WRAPPER_INOUT(ioctl_block_get_stats, IOCTL_BLOCK_GET_STATS, bool, block_stats_t)

// Multiple Block IO operations may be sent at once before a response is actually sent back.
// Block IO ops may be sent concurrently to different vmoids, and they also may be sent
// to different groups at any point in time.
//
// MAX_TXN_GROUP_COUNT "groups" are pre-allocated lanes separated on the block
// server.  Using a group allows multiple message to be buffered at once
// on a single communication channel before receiving a response.
//
// Usage of groups is identified by BLOCKIO_GROUP_ITEM, and is optional.
//
// These groups may be referred to with a "groupid", in the range [0,
// MAX_TXN_GROUP_COUNT).
//
// The protocol to communicate with a single group is as follows:
// 1) SEND [N - 1] messages with an allocated groupid for any value of 1 <= N.
//    The BLOCKIO_GROUP_ITEM flag is set for these messages.
// 2) SEND a final Nth message with the same groupid.
//    The BLOCKIO_GROUP_ITEM | BLOCKIO_GROUP_LAST flags are set for this
//    message.
// 3) RECEIVE a single response from the Block IO server after all N requests have completed.
//    This response is sent once all operations either complete or a single operation fails.
//    At this point, step (1) may begin again for the same groupid.
//
// For BLOCKIO_READ and BLOCKIO_WRITE, N may be greater than 1.
// Otherwise, N == 1 (skipping step (1) in the protocol above).
//
// Notes:
// - groupids may operate on any number of vmoids at once.
// - If additional requests are sent on the same groupid before step (3) has completed, then
//   the additional request will not be processed. If BLOCKIO_GROUP_LAST is set, an error will
//   be returned. Otherwise, the request will be silently dropped.
// - Messages within a group are not guaranteed to be processed in any order
//   relative to each other.
// - All requests receive responses, except for ones with BLOCKIO_GROUP_ITEM
//   that do not have BLOCKIO_GROUP_LAST set.
//
// For example, the following is a valid sequence of transactions:
//   -> (groupid = 1,          vmoid = 1, OP = Write | GroupItem,             reqid = 1)
//   -> (groupid = 1,          vmoid = 2, OP = Write | GroupItem,             reqid = 2)
//   -> (groupid = 2,          vmoid = 3, OP = Write | GroupItem | GroupLast, reqid = 0)
//   <- Response sent to groupid = 2, reqid = 0
//   -> (groupid = 1,          vmoid = 1, OP = Read | GroupItem | GroupLast,  reqid = 3)
//   <- Response sent to groupid = 1, reqid = 3
//   -> (groupid = 3,          vmoid = 1, OP = Write | GroupItem,             reqid = 4)
//   -> (groupid = don't care, vmoid = 1, OP = Read, reqid = 5)
//   <- Response sent to reqid = 5
//   -> (groupid = 3,          vmoid = 1, OP = Read | GroupItem | GroupLast,  reqid = 6)
//   <- Response sent to groupid = 3, reqid = 6
//
// Each transaction reads or writes up to 'length' blocks from the device, starting at 'dev_offset'
// blocks, into the VMO associated with 'vmoid', starting at 'vmo_offset' blocks.  If the
// transaction is out of range, for example if 'length' is too large or if 'dev_offset' is beyond
// the end of the device, ZX_ERR_OUT_OF_RANGE is returned.

#define MAX_TXN_GROUP_COUNT 8

// The Request ID allowing callers to correspond requests with responses.
// This field is entirely for client-side bookkeeping; there is no obligation
// to make request IDs unique.
typedef uint32_t reqid_t;
typedef uint16_t groupid_t;

// Reads from the Block device into the VMO
#define BLOCKIO_READ 0x00000001

// Writes to the Block device from the VMO
#define BLOCKIO_WRITE 0x00000002

// Writes any cached data to nonvolatile storage.
// Implies BARRIER_BEFORE and BARRIER_AFTER.
#define BLOCKIO_FLUSH 0x00000003

// Marks data on the backing storage as invalid.
#define BLOCKIO_TRIM 0x00000004

// Detaches the VMO from the block device.
#define BLOCKIO_CLOSE_VMO 0x00000005
#define BLOCKIO_OP_MASK 0x000000FF

// Require that this operation will not begin until all prior operations
// have completed.
#define BLOCKIO_BARRIER_BEFORE 0x00000100

// Require that this operation must complete before additional operations begin.
#define BLOCKIO_BARRIER_AFTER 0x00000200

// Associate the following request with |group|.
#define BLOCKIO_GROUP_ITEM 0x00000400

// Only respond after this request (and all previous within group) have completed.
// Only valid with BLOCKIO_GROUP_ITEM.
#define BLOCKIO_GROUP_LAST 0x00000800
#define BLOCKIO_FLAG_MASK 0x0000FF00

typedef struct {
    uint32_t opcode;
    reqid_t reqid;   // Transmitted in the block_fifo_response_t.
    groupid_t group; // Only used if opcode & BLOCKIO_GROUP_ITEM.
    vmoid_t vmoid;
    uint32_t length;
    uint64_t vmo_offset;
    uint64_t dev_offset;
} block_fifo_request_t;

typedef struct {
    zx_status_t status;
    reqid_t reqid;
    groupid_t group; // Only valid if transmitted in request.
    vmoid_t reserved0;
    uint32_t count; // The number of messages in the transaction completed by the block server.
    uint64_t reserved1;
    uint64_t reserved2;
} block_fifo_response_t;

static_assert(sizeof(block_fifo_request_t) == sizeof(block_fifo_response_t),
              "FIFO messages are the same size in both directions");

#define BLOCK_FIFO_ESIZE (sizeof(block_fifo_request_t))
#define BLOCK_FIFO_MAX_DEPTH (4096 / BLOCK_FIFO_ESIZE)

#endif  // SYSROOT_ZIRCON_DEVICE_BLOCK_H_