GN Build Arguments

All builds

acpica_debug_output

Enable debug output in the ACPI library (used by the ACPI bus driver).

Current value (from the default): false

From //third_party/acpica/BUILD.gn:9

active_partition

Current value (from the default): ""

From //build/images/args.gni:87

add_qemu_to_build_archives

Whether to include images necessary to run Fuchsia in QEMU in build archives.

Current value (from the default): false

From //build/images/args.gni:93

additional_bootserver_arguments

Additional bootserver args to add to pave.sh. New uses of this should be added with caution, and ideally discussion. The present use case is to enable throttling of netboot when specific network adapters are combined with specific boards, due to driver and hardware challenges.

Current value (from the default): ""

From //build/images/args.gni:99

all_font_file_paths

List of file paths to every font asset. Populated in fonts.gni.

Current value (from the default): []

From //src/fonts/build/font_args.gni:35

all_toolchain_variants

These should never be set as a build argument. It will be set below and passed to other toolchains through toolchain_args (see variant_toolchain.gni).

Current value (from the default): []

From //build/config/BUILDCONFIG.gn:1596

always_zedboot

Build boot images that prefer Zedboot over local boot (only for EFI).

Current value (from the default): false

From //build/images/args.gni:114

anv_enable_external_fd

TODO(fxbug.dev/67565) - remove once external FD extensions fully supported

Current value (from the default): false

From //third_party/mesa/src/intel/vulkan/BUILD.gn:27

anv_use_max_ram

Give maximum possible memory to Vulkan heap

Current value (from the default): false

From //third_party/mesa/src/intel/vulkan/BUILD.gn:30

asan_default_options

Default AddressSanitizer options (before the ASAN_OPTIONS environment variable is read at runtime). This can be set as a build argument to affect most “asan” variants in $variants (which see), or overridden in $toolchain_args in one of those variants. This can be a list of strings or a single string.

Note that even if this is empty, programs in this build cannot define their own __asan_default_options C function. Instead, they can use a sanitizer_extra_options() target in their deps and then any options injected that way can override that option's setting in this list.

Current value (from the default): ["detect_stack_use_after_return=1", "quarantine_size_mb=64"]

From //build/config/sanitizers/sanitizer_default_options.gni:16

auto_update_packages

Controls the behavior of sysmgr‘s PackageUpdatingLoader (v1) and the universe-resolver (v2). If true, when resolving a component an attempt to update the component’s package is first made through the Software Delivery system (specifically, through the package resolver, fuchsia.pkg.PackageResolver). If false, no attempt to update is made and components are loaded only from packages already available locally (for example, because the package is in base).

Current value (from the default): true

From //build/security.gni:118

avb_algorithm

Current value (from the default): "DEPRECATED"

From //build/images/vbmeta.gni:35

avb_atx_metadata

AVB metadata which will be used to validate public key

Current value (from the default): ""

From //build/images/vbmeta.gni:22

avb_key

a key which will be used to sign VBMETA and images for AVB

Current value (from the default): ""

From //build/images/vbmeta.gni:19

base_driver_package_labels

If you add fuchsia_driver_package labels to this variable, any drivers in these packages will be visible to Driver Manager. These package labels are also considered to be in the ‘base’ package set (for more info see ‘base_package_labels’).

Current value for target_cpu = "arm64": []

From //products/bringup.gni:51

Overridden from the default: []

From //BUILD.gn:24

Current value for target_cpu = "x64": []

From //products/bringup.gni:51

Overridden from the default: []

From //BUILD.gn:24

base_package_labels

If you add package labels to this variable, the packages will be included in the ‘base’ package set, which represents the set of packages that are part of an OTA. These packages are updated as an atomic unit during an OTA process and are immutable and are a superset of the TCB (Trusted Computing Base) for a product. These packages are never evicted by the system.

Current value for target_cpu = "arm64": ["//bundles:kitchen_sink"]

From //out/not-default/args.gn:8

Overridden from the default: []

From //BUILD.gn:31

Current value for target_cpu = "x64": ["//bundles:kitchen_sink"]

From //out/not-default/args.gn:8

Overridden from the default: []

From //BUILD.gn:31

basic_env_names

The list of environment names to include in “basic_envs”.

Current value (from the default): ["emu"]

From //build/testing/environments.gni:14

blob_layout_format

The format blobfs should store blobs in.

Current value (from the default): "compact"

From //build/images/args.gni:111

blobfs_board_maximum_bytes

In addition to reserving space for inodes and data, fs needs additional space for maintaining some internal data structures. So the space required to reserve inodes and data may exceed sum of the space needed for inodes and data. maximum_bytes puts an upper bound on the total bytes reserved for inodes, data bytes and reservation for all other internal fs metadata. A value of false does not put any upper bound. A filesystem may reserve few blocks required for its operations.

Current value (from the default): false

From //build/images/fvm.gni:101

blobfs_board_minimum_data_bytes

Number of bytes to reserve for data in the fs. This is in addition to what is reserved, if any, for the inodes. Data bytes constitutes “usable” space of the fs. A value of false does not reserve any additional space than minimum required for the filesystem.

Current value (from the default): false

From //build/images/fvm.gni:88

blobfs_board_minimum_inodes

minimum_inodes is the number of inodes to reserve for the fs A value of false does not reserve any additional space than minimum required for the filesystem.

Current value (from the default): false

From //build/images/fvm.gni:78

blobfs_enable_streaming_writes

Set this to true when configuring gn args to enable blobfs streaming writes. This is a compile time argument which allows us to conditionally enable blobfs streaming writes only on specific configurations.

Current value (from the default): false

From //src/storage/blobfs/BUILD.gn:18

blobfs_maximum_runtime_bytes

blobfs_maximum_runtime_bytes is an upper bound on the partition size on the device. Partitions can grow as needed if there are extra slices available in FVM. This limit prevents the blobfs partition from taking too much space away from other uses.

Pass the empty string for no limit.

Current value (from the default): ""

From //src/storage/fshost/BUILD.gn:16

blobfs_page_in_metrics_recording

Set this to true when configuring gn args to enable blobfs page-in metrics recording. This will also increase the inspect VMO size for blobfs to 2 MiB, to accommodate the large number of metrics entries.

Current value (from the default): false

From //src/storage/blobfs/BUILD.gn:13

blobfs_product_maximum_bytes

Current value (from the default): false

From //build/images/fvm.gni:102

blobfs_product_minimum_data_bytes

Current value (from the default): false

From //build/images/fvm.gni:89

blobfs_product_minimum_inodes

Current value (from the default): false

From //build/images/fvm.gni:79

board_bootfs_labels

A list of binary labels to include in the ZBI.

Current value for target_cpu = "arm64": ["//src/connectivity/ethernet/drivers/virtio:virtio_ethernet", "//src/devices/block/drivers/virtio:virtio_block", "//src/devices/block/drivers/virtio:virtio_scsi", "//src/devices/misc/drivers/virtio-rng:virtio_rng", "//src/devices/misc/drivers/virtio-socket:virtio_socket", "//src/devices/serial/drivers/virtio-console:virtio_console", "//src/graphics/drivers/misc:goldfish_driver_modules", "//src/graphics/display/drivers/goldfish-display", "//src/graphics/drivers/virtio:virtio_gpu", "//src/ui/input/drivers/virtio:virtio_input", "//src/devices/block/drivers/ahci", "//src/devices/board/drivers/qemu-arm64", "//src/devices/rtc/drivers/pl031-rtc", "//src/graphics/display/drivers/fake:fake-display", "//src/devices/bus/drivers/pci:bus-pci", "//src/devices/bus/drivers/pci:bus-pci.proxy", "//src/devices/usb/drivers/xhci-rewrite:xhci", "//src/power/power-manager:base_config", "//src/security/policy/zxcrypt:null"]

From //boards/arm64.gni:19

Overridden from the default: []

From //build/board.gni:22

Current value for target_cpu = "x64": ["//src/connectivity/ethernet/drivers/realtek-8111", "//src/devices/block/drivers/ahci", "//src/devices/block/drivers/mbr", "//src/devices/block/drivers/nvme", "//src/devices/block/drivers/pci-sdhci", "//src/devices/block/drivers/sdhci", "//src/devices/board/drivers/x86:platform-bus-x86", "//src/devices/bus/drivers/pci:bus-pci", "//src/devices/bus/drivers/pci:bus-pci.proxy", "//src/devices/i2c/drivers/intel-i2c", "//src/devices/rtc/drivers/intel-rtc", "//src/devices/serial/drivers/uart16550", "//src/devices/usb/drivers/xhci-rewrite:xhci", "//src/graphics/display/drivers/intel-i915", "//src/graphics/display/drivers/simple:simple.amd-kaveri", "//src/graphics/display/drivers/simple:simple.nv", "//src/media/audio/drivers/codecs/alc5514", "//src/media/audio/drivers/codecs/alc5663", "//src/media/audio/drivers/codecs/max98927", "//src/media/audio/drivers/intel-hda/codecs/hdmi:hdmi-audio-codec", "//src/media/audio/drivers/intel-hda/codecs/realtek:realtek-audio-codec", "//src/media/audio/drivers/intel-hda/controller:intel-hda", "//src/ui/input/drivers/i2c-hid", "//src/ui/input/drivers/pc-ps2", "//zircon/third_party/dev/ethernet/e1000", "//src/connectivity/ethernet/drivers/virtio:virtio_ethernet", "//src/devices/block/drivers/virtio:virtio_block", "//src/devices/block/drivers/virtio:virtio_scsi", "//src/devices/misc/drivers/virtio-rng:virtio_rng", "//src/devices/misc/drivers/virtio-socket:virtio_socket", "//src/devices/serial/drivers/virtio-console:virtio_console", "//src/graphics/drivers/misc:goldfish_driver_modules", "//src/graphics/display/drivers/goldfish-display", "//src/graphics/drivers/virtio:virtio_gpu", "//src/ui/input/drivers/virtio:virtio_input", "//src/graphics/display/drivers/simple:simple.bochs", "//src/graphics/display/drivers/simple:simple.intel", "//src/graphics/display/drivers/simple:simple.vmware", "//src/media/audio/drivers/intel-hda/codecs/qemu:qemu-audio-codec", "//src/devices/bin/acpidump", "//src/devices/pci/bin:bootfs", "//src/media/audio/bin/ihda", "//src/power/power-manager:base_config", "//src/security/policy/zxcrypt:null", "//boards/kernel_cmdline:serial-legacy", "//src/storage/fshost:gpt_all"]

From //boards/x64.gni:19

Overridden from the default: []

From //build/board.gni:22

board_driver_package_labels

A list of driver package labels to include in the ‘base’ package set. Used by the board definition rather than the product definition.

Current value (from the default): []

From //build/board.gni:11

board_extra_vbmeta_descriptors

Board level extra vbmeta descriptors to be combined into the top-level vbmeta struct (these are in json format)

see //build/images/vbmeta/README.md for more information about these.

Current value (from the default): []

From //build/images/vbmeta.gni:31

board_extra_vbmeta_images

DEPRECATED: Remove when no boards set a value for these.

Current value (from the default): []

From //build/images/vbmeta.gni:34

board_has_libvulkan_arm_mali

Board files can set this to true if they have a package with a mali libvulkan VCD.

Current value (from the default): false

From //src/graphics/lib/magma/gnbuild/magma.gni:51

board_name

Board name used for paving and amber updates.

Current value for target_cpu = "arm64": "qemu-arm64"

From //boards/arm64.gni:9

Overridden from the default: ""

From //build/board.gni:7

Current value for target_cpu = "x64": "x64"

From //boards/x64.gni:8

Overridden from the default: ""

From //build/board.gni:7

board_package_labels

A list of package labels to include in the ‘base’ package set. Used by the board definition rather than the product definition.

Current value for target_cpu = "arm64": ["//src/power/thermd", "//src/power/thermd:config", "//garnet/packages/prod:drivers-support"]

From //boards/arm64.gni:30

Overridden from the default: []

From //build/board.gni:15

Current value for target_cpu = "x64": ["//src/power/thermd", "//src/power/thermd:config", "//garnet/packages/prod:drivers-support", "//src/hwinfo:default_board_config", "//src/graphics/lib/magma/gnbuild/magma-intel-gen:libvulkan_intel_gen", "//src/graphics/lib/goldfish-vulkan/gnbuild:goldfish-vulkan"]

From //boards/common/x64-common.gni:67

Overridden from the default: []

From //build/board.gni:15

board_recovery_bootfs_labels

A list of binary labels to include in the recovery ZBI.

Current value for target_cpu = "arm64": ["//src/connectivity/ethernet/drivers/virtio:virtio_ethernet", "//src/devices/block/drivers/virtio:virtio_block", "//src/devices/block/drivers/virtio:virtio_scsi", "//src/devices/misc/drivers/virtio-rng:virtio_rng", "//src/devices/misc/drivers/virtio-socket:virtio_socket", "//src/devices/serial/drivers/virtio-console:virtio_console", "//src/graphics/drivers/misc:goldfish_driver_modules", "//src/graphics/display/drivers/goldfish-display", "//src/graphics/drivers/virtio:virtio_gpu", "//src/ui/input/drivers/virtio:virtio_input", "//src/devices/block/drivers/ahci", "//src/devices/board/drivers/qemu-arm64", "//src/devices/rtc/drivers/pl031-rtc", "//src/graphics/display/drivers/fake:fake-display", "//src/devices/bus/drivers/pci:bus-pci", "//src/devices/bus/drivers/pci:bus-pci.proxy", "//src/devices/usb/drivers/xhci-rewrite:xhci", "//src/power/power-manager:base_config", "//src/security/policy/zxcrypt:null"]

From //boards/arm64.gni:23

Overridden from the default: []

From //build/board.gni:33

Current value for target_cpu = "x64": ["//src/connectivity/ethernet/drivers/realtek-8111", "//src/devices/block/drivers/ahci", "//src/devices/block/drivers/mbr", "//src/devices/block/drivers/nvme", "//src/devices/block/drivers/pci-sdhci", "//src/devices/block/drivers/sdhci", "//src/devices/board/drivers/x86:platform-bus-x86", "//src/devices/bus/drivers/pci:bus-pci", "//src/devices/bus/drivers/pci:bus-pci.proxy", "//src/devices/i2c/drivers/intel-i2c", "//src/devices/rtc/drivers/intel-rtc", "//src/devices/serial/drivers/uart16550", "//src/devices/usb/drivers/xhci-rewrite:xhci", "//src/graphics/display/drivers/intel-i915", "//src/graphics/display/drivers/simple:simple.amd-kaveri", "//src/graphics/display/drivers/simple:simple.nv", "//src/media/audio/drivers/codecs/alc5514", "//src/media/audio/drivers/codecs/alc5663", "//src/media/audio/drivers/codecs/max98927", "//src/media/audio/drivers/intel-hda/codecs/hdmi:hdmi-audio-codec", "//src/media/audio/drivers/intel-hda/codecs/realtek:realtek-audio-codec", "//src/media/audio/drivers/intel-hda/controller:intel-hda", "//src/ui/input/drivers/i2c-hid", "//src/ui/input/drivers/pc-ps2", "//zircon/third_party/dev/ethernet/e1000", "//src/connectivity/ethernet/drivers/virtio:virtio_ethernet", "//src/devices/block/drivers/virtio:virtio_block", "//src/devices/block/drivers/virtio:virtio_scsi", "//src/devices/misc/drivers/virtio-rng:virtio_rng", "//src/devices/misc/drivers/virtio-socket:virtio_socket", "//src/devices/serial/drivers/virtio-console:virtio_console", "//src/graphics/drivers/misc:goldfish_driver_modules", "//src/graphics/display/drivers/goldfish-display", "//src/graphics/drivers/virtio:virtio_gpu", "//src/ui/input/drivers/virtio:virtio_input", "//src/graphics/display/drivers/simple:simple.bochs", "//src/graphics/display/drivers/simple:simple.intel", "//src/graphics/display/drivers/simple:simple.vmware", "//src/media/audio/drivers/intel-hda/codecs/qemu:qemu-audio-codec", "//src/devices/bin/acpidump", "//src/devices/pci/bin:bootfs", "//src/media/audio/bin/ihda", "//src/power/power-manager:base_config", "//src/security/policy/zxcrypt:null", "//boards/kernel_cmdline:serial-legacy"]

From //boards/x64.gni:13

Overridden from the default: []

From //build/board.gni:33

board_recovery_package_labels

A list of package labels to include in the recovery package set. Used by the board definition rather than the product definition.

Current value (from the default): []

From //build/board.gni:19

board_system_image_deps

A list of binary labels to include in the system_image package.

Current value for target_cpu = "arm64": ["//garnet/packages/prod:drivers-system", "//src/media/audio/bundles:virtual_audio_driver"]

From //boards/arm64.gni:25

Overridden from the default: []

From //build/board.gni:36

Current value for target_cpu = "x64": ["//garnet/packages/prod:drivers-system", "//src/media/audio/bundles:virtual_audio_driver"]

From //boards/common/x64-common.gni:62

Overridden from the default: []

From //build/board.gni:36

board_tools

List of paths to board-specific tools to include in the build output.

Most development tools can just be used in-tree and do not need to be included here. This arg is only meant for tools which may need to be distributed along with the build files, for example tools for flashing from SoC recovery mode.

Assets included in this way are included best-effort only and do not form any kind of stable contract for users of the archive.

Current value (from the default): []

From //build/images/args.gni:137

board_zedboot_bootfs_labels

A list of binary labels to include in the zedboot ZBI.

Current value for target_cpu = "arm64": ["//src/connectivity/ethernet/drivers/virtio:virtio_ethernet", "//src/devices/block/drivers/virtio:virtio_block", "//src/devices/block/drivers/virtio:virtio_scsi", "//src/devices/misc/drivers/virtio-rng:virtio_rng", "//src/devices/misc/drivers/virtio-socket:virtio_socket", "//src/devices/serial/drivers/virtio-console:virtio_console", "//src/graphics/drivers/misc:goldfish_driver_modules", "//src/graphics/display/drivers/goldfish-display", "//src/graphics/drivers/virtio:virtio_gpu", "//src/ui/input/drivers/virtio:virtio_input", "//src/devices/block/drivers/ahci", "//src/devices/board/drivers/qemu-arm64", "//src/devices/rtc/drivers/pl031-rtc", "//src/graphics/display/drivers/fake:fake-display", "//src/devices/bus/drivers/pci:bus-pci", "//src/devices/bus/drivers/pci:bus-pci.proxy", "//src/devices/usb/drivers/xhci-rewrite:xhci", "//src/power/power-manager:base_config", "//src/security/policy/zxcrypt:null"]

From //boards/arm64.gni:21

Overridden from the default: []

From //build/board.gni:30

Current value for target_cpu = "x64": ["//src/connectivity/ethernet/drivers/realtek-8111", "//src/devices/block/drivers/ahci", "//src/devices/block/drivers/mbr", "//src/devices/block/drivers/nvme", "//src/devices/block/drivers/pci-sdhci", "//src/devices/block/drivers/sdhci", "//src/devices/board/drivers/x86:platform-bus-x86", "//src/devices/bus/drivers/pci:bus-pci", "//src/devices/bus/drivers/pci:bus-pci.proxy", "//src/devices/i2c/drivers/intel-i2c", "//src/devices/rtc/drivers/intel-rtc", "//src/devices/serial/drivers/uart16550", "//src/devices/usb/drivers/xhci-rewrite:xhci", "//src/graphics/display/drivers/intel-i915", "//src/graphics/display/drivers/simple:simple.amd-kaveri", "//src/graphics/display/drivers/simple:simple.nv", "//src/media/audio/drivers/codecs/alc5514", "//src/media/audio/drivers/codecs/alc5663", "//src/media/audio/drivers/codecs/max98927", "//src/media/audio/drivers/intel-hda/codecs/hdmi:hdmi-audio-codec", "//src/media/audio/drivers/intel-hda/codecs/realtek:realtek-audio-codec", "//src/media/audio/drivers/intel-hda/controller:intel-hda", "//src/ui/input/drivers/i2c-hid", "//src/ui/input/drivers/pc-ps2", "//zircon/third_party/dev/ethernet/e1000", "//src/connectivity/ethernet/drivers/virtio:virtio_ethernet", "//src/devices/block/drivers/virtio:virtio_block", "//src/devices/block/drivers/virtio:virtio_scsi", "//src/devices/misc/drivers/virtio-rng:virtio_rng", "//src/devices/misc/drivers/virtio-socket:virtio_socket", "//src/devices/serial/drivers/virtio-console:virtio_console", "//src/graphics/drivers/misc:goldfish_driver_modules", "//src/graphics/display/drivers/goldfish-display", "//src/graphics/drivers/virtio:virtio_gpu", "//src/ui/input/drivers/virtio:virtio_input", "//src/graphics/display/drivers/simple:simple.bochs", "//src/graphics/display/drivers/simple:simple.intel", "//src/graphics/display/drivers/simple:simple.vmware", "//src/media/audio/drivers/intel-hda/codecs/qemu:qemu-audio-codec", "//src/devices/bin/acpidump", "//src/devices/pci/bin:bootfs", "//src/media/audio/bin/ihda", "//src/power/power-manager:base_config", "//src/security/policy/zxcrypt:null", "//boards/kernel_cmdline:serial-legacy"]

From //boards/x64.gni:14

Overridden from the default: []

From //build/board.gni:30

board_zedboot_cmdline_args

List of kernel command line arguments to bake into the zedboot image that are required by this board. See also zedboot_cmdline_args in //build/images/zedboot/BUILD.gn

Current value (from the default): []

From //build/board.gni:27

bootfs_only

Put the “system image” package in the BOOTFS. Hence what would otherwise be /system/... at runtime is /boot/... instead.

Current value for target_cpu = "arm64": true

From //products/bringup.gni:5

Overridden from the default: false

From //build/images/args.gni:14

Current value for target_cpu = "x64": true

From //products/bringup.gni:5

Overridden from the default: false

From //build/images/args.gni:14

build_all_vp9_file_decoder_conformance_tests

Current value (from the default): false

From //src/media/codec/examples/BUILD.gn:10

build_id_format

Build ID algorithm to use for Fuchsia-target code. This does not apply to host or guest code. The value is the argument to the linker‘s --build-id=... switch. If left empty (the default), the linker’s default format is used.

Current value (from the default): ""

From //build/config/build_id.gni:10

build_info_board

Board configuration of the current build

Current value for target_cpu = "arm64": "arm64"

From //out/not-default/args.gn:3

Overridden from the default: "qemu-arm64"

From //build/info/info.gni:12

Current value for target_cpu = "x64": "x64"

From //out/not-default/args.gn:3

Overridden from the default: "x64"

From //build/info/info.gni:12

build_info_product

Product configuration of the current build

Current value for target_cpu = "arm64": "bringup"

From //out/not-default/args.gn:4

Overridden from the default: ""

From //build/info/info.gni:9

Current value for target_cpu = "x64": "bringup"

From //out/not-default/args.gn:4

Overridden from the default: ""

From //build/info/info.gni:9

build_info_version

Logical version of the current build. If not set, defaults to the timestamp of the most recent update.

Current value (from the default): ""

From //build/info/info.gni:16

build_libvulkan_goldfish

Current value (from the default): ""

From //src/graphics/lib/goldfish-vulkan/gnbuild/BUILD.gn:13

build_libvulkan_img_rgx

Targets that will be built as IMG vulkan ICDS.

Current value (from the default): []

From //src/graphics/lib/magma/gnbuild/magma.gni:48

build_libvulkan_vsi_vip

Targets that will be built as verisilicon vulkan ICDS.

Current value (from the default): []

From //src/graphics/lib/magma/gnbuild/magma.gni:45

build_sdk_archives

Whether to build SDK tarballs.

Current value (from the default): false

From //build/sdk/config.gni:7

build_should_trace_actions

If enabled, all filesystem activity by actions will be traced and checked against their declared inputs and outputs and depfiles (if present). An action that accesses undeclared inputs or outputs will fail the build.

Current value (from the default): false

From //build/config/BUILDCONFIG.gn:573

build_uefi_disk

Generate a UEFI disk image

Current value (from the default): false

From //build/images/args.gni:26

cache_package_labels

If you add package labels to this variable, the packages will be included in the ‘cache’ package set, which represents an additional set of software that is made available on disk immediately after paving and in factory flows. These packages are not updated with an OTA, but instead are updated ephemerally. This cache of software can be evicted by the system if storage pressure arises or other policies indicate.

Current value for target_cpu = "arm64": []

From //out/not-default/args.gn:9

Overridden from the default: []

From //BUILD.gn:39

Current value for target_cpu = "x64": []

From //out/not-default/args.gn:9

Overridden from the default: []

From //BUILD.gn:39

camera_debug

Current value (from the default): false

From //src/camera/debug.gni:6

camera_gym_configuration_cycle_time_ms

Current value (from the default): 10000

From //src/camera/bin/camera-gym/BUILD.gn:11

camera_gym_enable_root_presenter

Current value (from the default): false

From //src/camera/bin/camera-gym/BUILD.gn:12

carnelian_enable_vulkan_validation

Include the vulkan validation layers in carnelian examples.

Current value (from the default): false

From //src/lib/ui/carnelian/BUILD.gn:13

check_production_eligibility

Whether to perform check on the build's eligibility for production. If true, base_packages and cache_packages are checked against dependencies on //build/validate:non_production_tag, which is used to tag any non-production GN labels. Build will fail if such dependency is found.

Current value (from the default): false

From //build/images/args.gni:105

check_repeatability

If enabled, run each affected action twice (once with renamed outputs) and compare the outputs' contents for reproducibility.

Current value (from the default): false

From //build/config/BUILDCONFIG.gn:577

check_vtables_in_rodata

Check that all vtables in fuchsia binaries listed in binaries.json are in readonly data sections. This check will be run at the end of a full build.

This is primarily meant to be used by the clang canary builders.

Current value (from the default): false

From //build/images/args.gni:66

chromium_build_dir

This variable specifies a fully qualified Chromium build output directory, such as /home/USER/chrome/src/out/fuchsia, that ‘cast_runner’, ‘web_runner’, and ‘web_engine’ will be obtained from. If unset, the prebuilt packages from CIPD will be used.

Current value (from the default): ""

From //src/chromium/build_args.gni:10

clang_embed_bitcode

Embed LLVM bitcode as .llvmbc section in ELF files. This is intended primarily for external tools that use bitcode for analysis.

Current value (from the default): false

From //build/config/clang/clang.gni:16

clang_lib_dir

Path to Clang lib directory.

Current value (from the default): "../../prebuilt/third_party/clang/linux-x64/lib"

From //build/images/manifest.gni:13

clang_ml_inliner

Controls whether to use the ML inliner in Clang to reduce size. Note that the option only takes effect when optimize is set to "size".

Current value (from the default): false

From //build/config/compiler.gni:43

clang_prefix

The default clang toolchain provided by the prebuilt. This variable is additionally consumed by the Go toolchain.

Current value (from the default): "../../prebuilt/third_party/clang/linux-x64/bin"

From //build/config/clang/clang.gni:12

clang_tool_dir

Directory where the Clang toolchain binaries (“clang”, “llvm-nm”, etc.) are found. If this is "", then the behavior depends on $clang_prefix. This toolchain is expected to support both Fuchsia targets and the host.

Current value (from the default): ""

From //build/toolchain/zircon/clang.gni:11

cobalt_environment

Selects the Cobalt environment to send data to. Choices: “LOCAL” - record log data locally to a file “DEVEL” - the non-prod environment for use in testing “PROD” - the production environment

Current value (from the default): "PROD"

From //src/cobalt/bin/app/BUILD.gn:14

compress_blobs

Whether to compress the blobfs image.

Current value (from the default): true

From //build/images/args.gni:108

concurrent_dart_jobs

Maximum number of Dart processes to run in parallel.

Dart analyzer uses a lot of memory which may cause issues when building with many parallel jobs e.g. when using goma. To avoid out-of-memory errors we explicitly reduce the number of jobs.

Current value (from the default): 32

From //build/dart/BUILD.gn:17

config_have_heap

Tells openweave to include files that require heap access.

Current value (from the default): true

From //third_party/openweave-core/config.gni:32

conformance_testing_netstack

If true, uses a netstack tailored for network conformance testing.

Current value (from the default): false

From //src/connectivity/network/BUILD.gn:13

core_realm_package_name

The following arguments are all used to configure the contents of the core component realm. See //src/sys/core/build/core.gni for documentation on what each field means. TODO: redo comments

Current value (from the default): "core-generic"

From //build/product.gni:21

core_realm_shards

Current value (from the default): []

From //build/product.gni:22

crash_diagnostics_dir

Clang crash reports directory path. Use empty path to disable altogether.

Current value (from the default): "//out/not-default/clang-crashreports"

From //build/config/clang/crash_diagnostics.gni:7

crashpad_dependencies

Current value (from the default): "fuchsia"

From //third_party/crashpad/build/crashpad_buildconfig.gni:22

crashpad_http_transport_impl

Current value (from the default): "libcurl"

From //third_party/crashpad/util/net/tls.gni:21

crashpad_use_boringssl_for_http_transport_socket

Current value (from the default): true

From //third_party/crashpad/util/net/tls.gni:30

current_cpu

Current value (from the default): ""

current_os

Current value (from the default): ""

custom_signing_script

If non-empty, the given script will be invoked to produce a signed ZBI image. The given script must accept -z for the input zbi path, and -o for the output signed zbi path. The path must be in GN-label syntax (i.e. starts with //).

Current value (from the default): ""

From //build/images/custom_signing.gni:10

custom_signing_script_deps

If custom_signing_script is not empty, a list of dependencies for the script.

Current value (from the default): []

From //build/images/custom_signing.gni:13

custom_signing_script_tools

If custom signing script is not empty, a list of host tool labels, without a toolchain, that the script depends on. The reason why these are not in custom_signing_script_deps is because these definitions are typically in board-specific .gni files where host_os or host_toolchain are not defined yet. Because these are imported from args.gn before BUILDCONFIG.gn is actually parsed.

Current value (from the default): []

From //build/images/custom_signing.gni:21

dart_default_build_cfg

TODO(fxbug.dev/64153) renable aot builds if (dart_force_product) { Product AOT dart_default_build_cfg = dart_release_build_cfg } else if (is_debug) { Non-product JIT

Current value (from the default):

{
  enable_asserts = true
  is_aot = false
  is_product = false
  platform_name = "dart_runner"
  runner_dep = "//src/dart:dart_jit_runner"
  runtime_meta = "//build/dart/meta/jit_runtime"
}

From //build/dart/config.gni:18

dart_force_product

Forces all Dart apps to build in product mode which is a stripped down version of the VM running in AOT mode.

Current value (from the default): false

From //build/dart/config.gni:10

data_partition_manifest

Path to manifest file containing data to place into the initial /data partition.

Current value (from the default): ""

From //build/images/args.gni:55

debian_guest_earlycon

Current value (from the default): false

From //src/virtualization/packages/debian_guest/BUILD.gn:10

debian_guest_qcow

Package the rootfs as a QCOW image (as opposed to a flat file).

Current value (from the default): true

From //src/virtualization/packages/debian_guest/BUILD.gn:9

debuginfo

  • none means no debugging information
  • backtrace means sufficient debugging information to symbolize backtraces
  • debug means debugging information suited for debugging

Current value (from the default): "debug"

From //build/config/compiler.gni:55

dev_bootfs_labels

List of labels for objects to include in the ZBI.

Current value (from the default): []

From //build/dev.gni:17

dev_build_only_deps

List of labels for targets that should be built but not included in any build outputs that are part of the build API (e.g. zbi's, package servers).

Current value (from the default): []

From //build/dev.gni:14

dev_recovery_bootfs_labels

List of binary labels to include in the recovery ZBI.

Current value (from the default): []

From //build/dev.gni:23

dev_system_image_deps

List of labels for binaries to include in the system image.

Current value (from the default): []

From //build/dev.gni:10

dev_zedboot_bootfs_labels

List of binary labels to include in the zedboot ZBI.

Current value (from the default): []

From //build/dev.gni:20

devmgr_config

List of arguments to add to /boot/config/devmgr. These come after synthesized arguments to configure blobfs and pkgfs.

Current value (from the default): []

From //build/images/args.gni:23

disable_dart_strict_deps

Enable all strict deps.

Current value (from the default): false

From //build/dart/dart_library.gni:19

disable_kernel_pci

Disable kernel PCI driver support. A counterpart of the the build flag platform_enable_user_pci in //src/devices/bus/drivers/pci/pci.gni.

Current value (from the default): false

From //zircon/kernel/params.gni:67

dwarf_version

Explicitly specify DWARF version used.

Current value (from the default): 5

From //build/config/compiler.gni:69

enable_api_diff

Detect dart API changes TODO(fxbug.dev/36723, fxbug.dev/6623) Remove this flag once issues are resolved

Current value (from the default): false

From //build/dart/dart_library.gni:23

enable_dart_analysis

Enable all dart analysis

Current value (from the default): true

From //build/dart/dart_library.gni:16

enable_frame_pointers

Controls whether the compiler emits full stack frames for function calls. This reduces performance but increases the ability to generate good stack traces, especially when we have bugs around unwind table generation. It applies only for Fuchsia targets (see below where it is unset).

TODO(fxbug.dev/32216): Theoretically unwind tables should be good enough so we can remove this option when the issues are addressed.

Current value (from the default): false

From //build/config/BUILD.gn:24

enable_lock_dep

Enable kernel lock dependency tracking.

Current value (from the default): false

From //zircon/kernel/params.gni:35

enable_lock_dep_tests

Enable kernel lock dependency tracking tests. By default this is enabled when tracking is enabled, but can also be eanbled independently to assess whether the tests build and fail correctly when lockdep is disabled.

Current value (from the default): false

From //zircon/kernel/params.gni:94

enable_mdns_trace

Enables the tracing feature of mdns, which can be turned on using “mdns-util verbose”.

Current value (from the default): false

From //src/connectivity/network/mdns/service/BUILD.gn:13

enable_netboot

Whether to build the netboot zbi by default.

You can still build //build/images:netboot explicitly even if enable_netboot is false.

Current value (from the default): false

From //build/images/args.gni:60

escher_test_for_glsl_spirv_mismatch

If true, this enables the |SpirvNotChangedTest| to check if the precompiled shaders on disk are up to date and reflect the current shader source code compiled with the latest shaderc tools/optimizations. People on the Scenic team should build with this flag turned on to make sure that any shader changes that were not run through the precompiler have their updated spirv written to disk. Other teams and CQ do not need to worry about this flag.

Current value (from the default): false

From //src/ui/lib/escher/build_args.gni:18

escher_use_runtime_glsl

Determines whether or not escher will build with the glslang and shaderc libraries. When false, these libraries will not be included in the scenic/ escher binary and as a result shaders will not be able to be compiled at runtime. Precompiled spirv code will be loaded into memory from disk instead.

Current value (from the default): false

From //src/ui/lib/escher/build_args.gni:10

exclude_testonly_syscalls

If true, excludes syscalls with the [testonly] attribute.

Current value (from the default): false

From //zircon/vdso/vdso.gni:7

expat_build_root

Current value (from the default): "//third_party/expat"

From //src/graphics/lib/magma/gnbuild/magma.gni:14

experimental_cxx_version

NOTE: This is for experimentation only and should not normally be changed. Set the version of the C++ standard to compile for, 17 or 20.

Current value (from the default): 17

From //build/config/BUILD.gn:29

experimental_wlan_client_mlme

Selects the SoftMAC client implementation to use. Choices: false (default) - C++ Client MLME implementation true - Rust Client MLME implementation This argument is temporary until Rust MLME is ready to be used.

Current value (from the default): false

From //src/connectivity/wlan/lib/mlme/cpp/BUILD.gn:12

extra_manifest_args

Extra args to globally apply to the manifest generation script.

Current value (from the default): []

From //build/images/manifest.gni:19

extra_package_labels

Current value (from the default): []

From //third_party/cobalt/BUILD.gn:10

extra_variants

Additional variant toolchain configs to support. This is just added to known_variants.

Current value (from the default): []

From //build/config/BUILDCONFIG.gn:1353

extract_minfs_metadata_on_corruption

If extract_minfs_metadata_on_corruption is true, fshost extracts minfs metadata on finding it corrupted. Setting this flag to true helps debugging corruptions.

Current value (from the default): false

From //src/storage/fshost/BUILD.gn:32

fastboot_product

Current value (from the default): ""

From //build/images/args.gni:88

fidl_trace_level

0 = Disable FIDL userspace tracing (default). 1 = Enable FIDL userspace tracing.

Current value (from the default): 0

From //build/fidl/args.gni:8

firmware_prebuilts

List of prebuilt firmware blobs to include in update packages.

Each entry in the list is a scope containing:

  • path: path to the image (see also firmware_prebuilts_path_suffix)
  • type: firmware type, a device-specific unique identifier
  • partition (optional): if specified, the fastboot flash partition

Current value (from the default): []

From //build/images/args.gni:40

firmware_prebuilts_path_suffix

Suffix to append to all firmware_prebuilts path variables.

Typically this indicates the hardware revision, and is made available so that users can easily switch revisions using a single arg.

Current value (from the default): ""

From //build/images/args.gni:46

flatland_visual_debugging

If true, this enables the display compositor to tint all Flatland views that are rendered via the GPU renderer instead of by direct DisplayController scanout.

Current value (from the default): false

From //src/ui/scenic/lib/flatland/engine/build_args.gni:8

flutter_default_build_cfg

Non-product AOT

Current value (from the default):

{
  enable_asserts = false
  is_aot = true
  is_product = false
  platform_name = "flutter_runner"
  runner_dep = "//src/flutter:flutter_aot_runner"
  runtime_meta = "//build/flutter/meta/aot_runtime"
}

From //build/flutter/config.gni:22

flutter_driver_enabled

Enables/Disables flutter driver using ‘--args=flutter_driver_enabled=[true/false]’ in fx set. (Disabled by default) This is effective only on debug builds.

Current value (from the default): false

From //build/testing/flutter_driver.gni:9

flutter_force_product

If set to true, will force the runenrs to be built in product mode which means they will not have an exposed vm service

Current value (from the default): false

From //build/flutter/config.gni:10

font_catalog_paths

Current value (from the default): ["//prebuilt/third_party/fonts/fuchsia.font_catalog.json"]

From //src/fonts/build/font_args.gni:17

font_pkg_entries

Merged contents of .font_pkgs.json files. Populated in fonts.gni.

Current value (from the default): []

From //src/fonts/build/font_args.gni:32

font_pkgs_paths

Locations of .font_pkgs.json files, which list the locations of font files within the workspace, as well as safe names that are derived from the fonts' file names and can be used to name Fuchsia packages.

Current value (from the default): ["//prebuilt/third_party/fonts/fuchsia.font_pkgs.json"]

From //src/fonts/build/font_args.gni:22

fonts_dir

Directory into which all fonts are checked out from CIPD

Current value (from the default): "//prebuilt/third_party/fonts"

From //src/fonts/build/font_args.gni:12

format_minfs_on_corruption

If format_minfs_on_corruption is true (the default), fshost formats minfs partition on finding it corrupted. Set to false to keep the devices in a corrupted state which might be of help to debug issues.

Current value (from the default): true

From //src/storage/fshost/BUILD.gn:28

fuchsia_sdk_root

Consumers of the Fuchsia SDK instantiate templates for various SDK parts at a specific spot within their buildroots. The target name for the specific part is then derived from the part name as specified in the meta.json manifest. Different buildroot instantiate the SDK parts at different locations and then set this variable. GN rules can then prefix this variable name in SDK builds to the name of the SDK part. This flag is meaningless in non-SDK buildroots.

Current value (from the default): ""

From //build/fuchsia/sdk.gni:17

fuchsia_static_pkgs_goldens

An optional lit of golden files for fuchsia.zbi static pkgs list. If specified, they would be compared against fuchsia.zbi static pkgs list during build time. At least one of the golden files must match. In normal case, there should only be one golden file in this list. During a soft transition where changes are made in a different repo than the golden file repo, user need to

  1. copy the old golden file before the change to ‘*.orig’
  2. create a new golden file reflecting the changes
  3. add both the old golden file and new golden file to this list. e.g. there would be ‘product.txt’ and ‘product.txt.orig’ in this list and check in the above changes.
  4. check in the changes that is made in a different repo.
  5. delete ‘product.txt.orig’ and remove it from this list.

Current value (from the default): []

From //build/security.gni:81

fuchsia_zbi_bootfs_filelist_goldens

An optional lit of golden files for fuchsia.zbi bootFS file list. If specified, they would be compared against fuchsia.zbi bootFS file list during build time. At least one of the golden files must match. In normal case, there should only be one golden file in this list. During a soft transition where changes are made in a different repo than the golden file repo, user need to

  1. copy the old golden file before the change to ‘*.orig’
  2. create a new golden file reflecting the changes
  3. add both the old golden file and new golden file to this list. e.g. there would be ‘product.txt’ and ‘product.txt.orig’ in this list and check in the above changes.
  4. check in the changes that is made in a different repo.
  5. delete ‘product.txt.orig’ and remove it from this list.

Current value (from the default): []

From //build/security.gni:51

fuchsia_zbi_kernel_cmdline_goldens

An optional list of golden files for fuchsia.zbi kernel cmdline args. If specified, they would be compared against fuchsia.zbi kernel cmdline during build time. In normal case, there should only be golden file in this list. During a soft transition where changes are made in a different repo than the golden file repo, user need to

  1. copy the old golden file before the change to ‘*.orig’
  2. create a new golden file reflecting the changes
  3. add both the old golden file and new golden file to this list. e.g. there would be ‘product.txt’ and ‘product.txt.orig’ in this list and check in the above changes.
  4. check in the changes that is made in a different repo.
  5. delete ‘product.txt.orig’ and remove it from this list.

Current value (from the default): []

From //build/security.gni:21

futex_tracing_enabled

Enables kernel tracing of futex interactions

Current value (from the default): false

From //zircon/kernel/params.gni:51

fvm_emmc_partition_size

The size in bytes of the FVM partition on the target eMMC devices. Specifying this parameter will lead build to generate a fvm.fastboot.blk suitable for flashing through fastboot for eMMC devices.

Current value (from the default): false

From //build/images/fvm.gni:34

fvm_ftl_nand_block_count

Current value (from the default): false

From //build/images/fvm.gni:116

fvm_ftl_nand_oob_size

Current value (from the default): false

From //build/images/fvm.gni:114

fvm_ftl_nand_page_size

Specifying these variables will generate a NAND FVM image suitable for directly flashing via fastboot. The NAND characteristics are required in order to properly initialize the FTL metadata in the OOB area. max_fvm_size should also be nonzero or else minfs will not have any room to initialize on boot.

Current value (from the default): false

From //build/images/fvm.gni:113

fvm_ftl_nand_pages_per_block

Current value (from the default): false

From //build/images/fvm.gni:115

fvm_image_size

The size in bytes of the FVM partition image to create. Normally this is computed to be just large enough to fit the blob and data images. The default value is false, which means to size based on inputs. Specifying a size that is too small will result in build failure.

Current value (from the default): false

From //build/images/fvm.gni:29

fvm_max_disk_size

The max size of the disk where the FVM is written. This is used for preallocating metadata to determine how much the FVM can expand on disk. Only applies to sparse FVM images. At sparse image construction time, the build fails if the inputs are larger than fvm_max_disk_size. At paving time, the FVM will be sized to the target's disk size up to fvm_max_disk_size. If the size of the disk increases after initial paving, the FVM will resize up to fvm_max_disk_size. During paving, if the target FVM has declared a smaller size than fvm_max_disk_size, the FVM is reinitialized to the larger size. The default value is false which sets the max disk size to the size of the disk at pave/format time.

Current value (from the default): false

From //build/images/fvm.gni:47

fvm_partition

Current value (from the default): ""

From //build/images/args.gni:86

fvm_reserved_slices

Number of slices reserved by FVM for internal usage. A reservation partition will be added to the FVM image, containing this many slices. If set to the empty string, then no reservation partition will be added. Set to 1 by default so that we exercise this feature on all product configurations.

Current value (from the default): 1

From //build/images/fvm.gni:61

fvm_slice_size

The size of the FVM partition images “slice size”. The FVM slice size is a minimum size of a particular chunk of a partition that is stored within FVM. A very small slice size may lead to decreased throughput. A very large slice size may lead to wasted space. The selected default size of 8mb is selected for conservation of space, rather than performance.

Current value (from the default): 8388608

From //build/images/fvm.gni:54

gcc_tool_dir

Directory where the GCC toolchain binaries (“gcc”, “nm”, etc.) are found. This directory is expected to contain aarch64-elf-* and x86_64-elf-* tools used to build for the Fuchsia targets. This directory will not be used for host tools. If this is "", then a standard prebuilt is used.

Current value (from the default): ""

From //build/toolchain/zircon/gcc.gni:15

glm_build_root

Current value (from the default): "//third_party/glm"

From //src/graphics/lib/magma/gnbuild/magma.gni:17

go_vet_enabled

go_vet_enabled [bool] if false, go vet invocations are disabled for all builds.

Current value (from the default): false

From //build/go/go_build.gni:22

gocache_dir

gocache_dir Directory GOCACHE environment variable will be set to. This directory will have build and test results cached, and is safe to be written to concurrently. If overridden, this directory must be a full path.

Current value (from the default): "/b/s/w/ir/x/w/out/not-default/dartlang/.gocache"

From //build/go/go_build.gni:18

goma_dir

Directory containing the Goma source code. This can be a GN source-absolute path (“//...”) or a system absolute path.

Current value (from the default): "//prebuilt/third_party/goma/linux-x64"

From //build/toolchain/goma.gni:15

gpt_image

GUID Partition Table (GPT) image.

Typically useful for initially flashing a device from zero-state.

Current value (from the default): ""

From //build/images/args.gni:51

graphics_compute_generate_debug_shaders

Set to true in your args.gn file to generate pre-processed and auto-formatted shaders under the “debug” sub-directory of HotSort and Spinel target generation output directories.

These are never used, but can be reviewed manually to verify the impact of configuration parameters, or when modifying a compute shader.

Example results:

out/default/ gen/src/graphics/lib/compute/ hotsort/targets/hs_amd_gcn3_u64/ comp/ hs_transpose.comp -> unpreprocessed shader debug/ hs_transpose.glsl -> preprocessed shader

Current value (from the default): true

From //src/graphics/lib/compute/gn/glsl_shader_rules.gni:28

graphics_compute_skip_spirv_opt

At times we may want to compare the performance of unoptimized vs. optimized shaders. On desktop platforms, use of spirv-opt doesn't appear to provide major performance improvements but it significantly reduces the size of the SPIR-V modules.

Disabling the spirv-opt pass may also be useful in identifying and attributing code generation bugs.

Current value (from the default): true

From //src/graphics/lib/compute/gn/glsl_shader_rules.gni:38

have_libvulkan_arm_mali

Driver developers can set this to true if they are manually including a Mali package. This will change test environments so Vulkan tests run on boards with Mali GPUs.

Current value (from the default): false

From //src/graphics/lib/magma/gnbuild/magma.gni:40

host_byteorder

Current value (from the default): "undefined"

From //build/config/host_byteorder.gni:7

host_cpu

Current value (from the default): "x64"

host_labels

If you add labels to this variable, these will be included in the ‘host’ artifact set, which represents an additional set of host-only software that is produced by the build.

Current value for target_cpu = "arm64": ["//tools/devshell:fx", "//tools/bindc:host"]

From //out/not-default/args.gn:10

Overridden from the default: []

From //BUILD.gn:58

Current value for target_cpu = "x64": ["//tools/devshell:fx", "//tools/bindc:host"]

From //out/not-default/args.gn:10

Overridden from the default: []

From //BUILD.gn:58

host_os

Current value (from the default): "linux"

host_tools_dir

This is the directory where host tools intended for manual use by developers get installed. It‘s something a developer might put into their shell’s $PATH. Host tools that are just needed as part of the build do not get copied here. This directory is only for things that are generally useful for testing or debugging or whatnot outside of the GN build itself. These are only installed by an explicit install_host_tools() rule (see //build/host.gni).

Current value (from the default): "//out/not-default/host-tools"

From //build/host.gni:13

icu_disable_thin_archive

If true, compile icu into a standalone static library. Currently this is only useful on Chrome OS.

Current value (from the default): false

From //third_party/icu/config.gni:12

icu_major_version_number

Contains the major version number of the ICU library, for dependencies that need different configuration based on the library version. Currently this is only useful in Fuchsia.

Current value (from the default): "69"

From //third_party/icu/version.gni:9

icu_use_data_file

Tells icu to load an external data file rather than rely on the icudata being linked directly into the binary.

Current value (from the default): true

From //third_party/icu/config.gni:8

include_fvm_blob_sparse

Include fvm.blob.sparse.blk image into the build if set to true

Current value (from the default): false

From //build/images/args.gni:117

include_internal_fonts

Set to true to include internal fonts in the build.

Current value (from the default): false

From //src/fonts/build/font_args.gni:7

include_tests_that_fail_on_nuc_asan

Whether to include tests that are known to fail on NUC with ASan. Should be set to false in the infra builders that have board == “x64” and “asan” in variants.

Current value (from the default): true

From //build/testing/environments.gni:11

include_zxdb_large_tests

Normally these tests are not built and run because they require large amounts of optional data be downloaded. Set this to true to enable the build for the zxdb_large_tests. See symbols/test_data/README.md for how to download the data required for this test.

Current value (from the default): false

From //src/developer/debug/zxdb/BUILD.gn:12

inet_config_enable_async_dns_sockets

Tells inet to support additionally support async dns sockets.

Current value (from the default): true

From //third_party/openweave-core/config.gni:17

inet_want_endpoint_dns

Tells inet to include support for the corresponding protocol.

Current value (from the default): true

From //third_party/openweave-core/config.gni:10

inet_want_endpoint_raw

Current value (from the default): true

From //third_party/openweave-core/config.gni:11

inet_want_endpoint_tcp

Current value (from the default): true

From //third_party/openweave-core/config.gni:12

inet_want_endpoint_tun

Current value (from the default): true

From //third_party/openweave-core/config.gni:14

inet_want_endpoint_udp

Current value (from the default): true

From //third_party/openweave-core/config.gni:13

is_analysis

If set, the build will produce compilation analysis dumps, used for code cross-referencing in code search. The extra work done during analysis is only needed for cross-referencing builds, so we're keeping the flag and the analysis overhead turned off by default.

Current value (from the default): false

From //build/config/BUILDCONFIG.gn:24

is_debug

Debug build.

Current value for target_cpu = "arm64": false

From //out/not-default/args.gn:5

Overridden from the default: true

From //build/config/BUILDCONFIG.gn:27

Current value for target_cpu = "x64": false

From //out/not-default/args.gn:5

Overridden from the default: true

From //build/config/BUILDCONFIG.gn:27

kernel_base

Current value (from the default): "0xffffffff00000000"

From //zircon/kernel/params.gni:29

kernel_debug_level

Enables various kernel debugging and diagnostic features. Valid values are between 0-3. The higher the value, the more that are enabled. A value of 0 disables all of them.

TODO(fxbug.dev/41790): This value is derived from assert_level. Decouple the two and set kernel_debug_level independently.

Current value (from the default): 2

From //zircon/kernel/params.gni:79

kernel_debug_print_level

Controls the verbosity of kernel dprintf messages. The higher the value, the more dprintf messages emitted. Valid values are 0-2 (inclusive): 0 - CRITCAL / ALWAYS 1 - INFO 2 - SPEW

Current value (from the default): 2

From //zircon/kernel/params.gni:86

kernel_extra_defines

Extra macro definitions for kernel code, e.g. “DISABLE_KASLR”, “ENABLE_KERNEL_LL_DEBUG”.

Current value (from the default): []

From //zircon/kernel/params.gni:71

kernel_version_git_checkout

By default the kernel version string is generated based on the full git revision found by git rev-parse HEAD in this checkout directory.

Current value (from the default): "//zircon/.."

From //zircon/kernel/lib/version/BUILD.gn:20

kernel_version_git_dirty_check

If this is true, then the kernel version string generated based on kernel_version_git_checkout also adds a “-dirty” suffix if any files in the checkout are modified from what's committed in git.

Current value (from the default): true

From //zircon/kernel/lib/version/BUILD.gn:25

kernel_version_string

Version string embedded in the kernel for zx_system_get_version_string. If set to the default "", a string is generated based on the kernel_version_git_checkout and kernel_version_git_dirty_check settings, which see.

Current value (from the default): ""

From //zircon/kernel/lib/version/BUILD.gn:16

known_variants

List of variants that will form the basis for variant toolchains. To make use of a variant, set select_variant.

Normally this is not set as a build argument, but it serves to document the available set of variants. See also universal_variants. Only set this to remove all the default variants here. To add more, set extra_variants instead.

Each element of the list is one variant, which is a scope defining:

configs (optional) [list of labels] Each label names a config that will be automatically used by every target built in this variant. For each config ${label}, there must also be a target ${label}_deps, which each target built in this variant will automatically depend on. The variant() template is the recommended way to define a config and its _deps target at the same time.

remove_common_configs (optional) remove_shared_configs (optional) [list of labels] This list will be removed (with -=) from the default_common_binary_configs list (or the default_shared_library_configs list, respectively) after all other defaults (and this variant's configs) have been added.

deps (optional) [list of labels] Added to the deps of every target linked in this variant (as well as the automatic ${label}_deps for each label in configs).

name (required if configs is omitted) [string] Name of the variant as used in select_variant elements' variant fields. It's a good idea to make it something concise and meaningful when seen as e.g. part of a directory name under $root_build_dir. If name is omitted, configs must be nonempty and the simple names (not the full label, just the part after all /s and :s) of these configs will be used in toolchain names (each prefixed by a “-”), so the list of config names forming each variant must be unique among the lists in known_variants + extra_variants.

tags (optional) [list of strings] A list of liberal strings describing properties of the toolchain instances created from this variant scope. See //build/toolchain/variant_tags.gni for the list of available values and their meaning.

toolchain_args (optional) [scope] Each variable defined in this scope overrides a build argument in the toolchain context of this variant.

host_only (optional) target_only (optional) [scope] This scope can contain any of the fields above. These values are used only for host or target, respectively. Any fields included here should not also be in the outer scope.

Current value (from the default):

[{
  configs = ["//build/config/lto"]
  tags = ["lto"]
}, {
  configs = ["//build/config/lto:thinlto"]
  tags = ["lto"]
}, {
  configs = ["//build/config/profile:coverage"]
  tags = ["instrumented", "coverage"]
}, {
  configs = ["//build/config/profile:coverage-rust"]
  tags = ["instrumented", "coverage"]
}, {
  configs = ["//build/config/profile"]
  tags = ["instrumented", "profile"]
}, {
  configs = ["//build/config/profile:coverage-sdk"]
  tags = ["instrumented", "coverage"]
}, {
  configs = ["//build/config/sanitizers:ubsan"]
  remove_common_configs = ["//build/config:no_rtti"]
  tags = ["instrumented", "instrumentation-runtime", "kernel-excluded", "ubsan"]
}, {
  configs = ["//build/config/sanitizers:ubsan", "//build/config/sanitizers:sancov"]
  remove_common_configs = ["//build/config:no_rtti"]
  tags = ["instrumented", "instrumentation-runtime", "kernel-excluded", "sancov", "ubsan"]
}, {
  configs = ["//build/config/sanitizers:asan"]
  host_only = {
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
}
  tags = ["asan", "instrumentation-runtime", "instrumented", "lsan", "replaces-allocator", "kernel-excluded"]
  toolchain_args = { }
}, {
  configs = ["//build/config/sanitizers:asan", "//build/config/sanitizers:ubsan"]
  host_only = {
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
}
  remove_common_configs = ["//build/config:no_rtti"]
  tags = ["asan", "instrumentation-runtime", "instrumented", "lsan", "replaces-allocator", "kernel-excluded", "ubsan"]
  toolchain_args = { }
}, {
  configs = ["//build/config/sanitizers:asan", "//build/config/sanitizers:sancov"]
  host_only = {
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
}
  tags = ["asan", "instrumentation-runtime", "instrumented", "lsan", "replaces-allocator", "kernel-excluded", "sancov"]
  toolchain_args = { }
}, {
  configs = ["//build/config/sanitizers:asan", "//build/config/zircon:no_safestack"]
  host_only = {
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
}
  name = "kasan"
  tags = ["asan", "instrumentation-runtime", "instrumented", "lsan", "replaces-allocator", "kernel-only"]
  toolchain_args = { }
}, {
  configs = ["//build/config/sanitizers:asan", "//build/config/zircon:no_safestack", "//build/config/sanitizers:sancov"]
  host_only = {
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
}
  name = "kasan-sancov"
  tags = ["asan", "instrumentation-runtime", "instrumented", "lsan", "replaces-allocator", "kernel-only", "sancov"]
  toolchain_args = { }
}, {
  configs = ["//build/config/sanitizers:asan", "//build/config/fuzzer", "//build/config/sanitizers:rust-asan", "//build/config:icf"]
  host_only = {
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
}
  name = "asan-fuzzer"
  remove_common_configs = ["//build/config:icf"]
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
  tags = ["asan", "instrumentation-runtime", "instrumented", "lsan", "replaces-allocator", "kernel-excluded", "fuzzer"]
  toolchain_args = {
  asan_default_options = "alloc_dealloc_mismatch=0:check_malloc_usable_size=0:detect_odr_violation=0:max_uar_stack_size_log=16:print_scariness=1:allocator_may_return_null=1:detect_leaks=0:detect_stack_use_after_return=1:malloc_context_size=128:print_summary=1:print_suppressions=0:strict_memcmp=0:symbolize=0"
}
}, {
  configs = ["//build/config/fuzzer", "//build/config/sanitizers:ubsan", "//build/config:icf"]
  name = "ubsan-fuzzer"
  remove_common_configs = ["//build/config:icf", "//build/config:no_rtti"]
  remove_shared_configs = ["//build/config:symbol_no_undefined"]
  tags = ["fuzzer", "instrumented", "instrumentation-runtime", "ubsan"]
}, {
  name = "gcc"
  tags = ["gcc"]
}]

From //build/config/BUILDCONFIG.gn:1204

launch_basemgr_on_boot

Indicates whether to include basemgr.cmx in the boot sequence for the product image.

Current value (from the default): true

From //src/modular/build/modular_config/modular_config.gni:12

linux_runner_extras_tests

If true, adds additional testonly content to extras.img, which will be built and mounted inside the container at /mnt/chromeos.

Current value (from the default): false

From //src/virtualization/packages/biscotti_guest/linux_runner/BUILD.gn:29

linux_runner_gateway

Current value (from the default): "10.0.0.1"

From //src/virtualization/packages/biscotti_guest/linux_runner/BUILD.gn:24

linux_runner_ip

Default values for the guest network configuration.

These are currently hard-coded to match what is setup in the virtio-net device.

See //src/virtualization/bin/vmm/device/virtio_net.cc for more details.

Current value (from the default): "10.0.0.2"

From //src/virtualization/packages/biscotti_guest/linux_runner/BUILD.gn:23

linux_runner_netmask

Current value (from the default): "255.255.255.0"

From //src/virtualization/packages/biscotti_guest/linux_runner/BUILD.gn:25

linux_runner_user_extras

Point this to the location of external files to be included as extras

Current value (from the default): []

From //src/virtualization/packages/biscotti_guest/linux_runner/BUILD.gn:37

linux_runner_volatile_block

If true, all block devices that would normally load as READ_WRITE will be loaded as VOLATILE_WRITE. This is useful when working on changes to the linux kernel as crashes and panics can sometimes corrupt the images.

Current value (from the default): false

From //src/virtualization/packages/biscotti_guest/linux_runner/BUILD.gn:34

local_bench

Used to enable local benchmarking/fine-tuning when running benchmarks in fx shell. Pass --args=local_bench='true' to fx set in order to enable it.

Current value (from the default): false

From //src/developer/fuchsia-criterion/BUILD.gn:13

log_startup_sleep

Current value (from the default): "30000"

From //garnet/bin/log_listener/BUILD.gn:13

lsan_default_options

Default LeakSanitizer options (before the LSAN_OPTIONS environment variable is read at runtime). This can be set as a build argument to affect most “lsan” variants in $variants (which see), or overridden in $toolchain_args in one of those variants. This can be a list of strings or a single string.

Note that even if this is empty, programs in this build cannot define their own __lsan_default_options C function. Instead, they can use a sanitizer_extra_options() target in their deps and then any options injected that way can override that option's setting in this list.

Current value (from the default): []

From //build/config/sanitizers/sanitizer_default_options.gni:35

magma_build_root

Current value (from the default): "//src/graphics/lib/magma"

From //src/graphics/lib/magma/gnbuild/magma.gni:13

magma_enable_developer_build

Enable this to have the msd include a suite of tests and invoke them automatically when the driver starts.

Current value (from the default): false

From //src/graphics/lib/magma/gnbuild/magma.gni:27

magma_enable_tracing

Enable this to include fuchsia tracing capability

Current value (from the default): true

From //src/graphics/lib/magma/gnbuild/magma.gni:23

magma_openvx_include

The path to OpenVX headers

Current value (from the default): ""

From //src/graphics/lib/magma/gnbuild/magma.gni:33

magma_openvx_package

The path to an OpenVX implementation

Current value (from the default): ""

From //src/graphics/lib/magma/gnbuild/magma.gni:36

magma_python_path

Current value (from the default): "/b/s/w/ir/x/w/third_party/mako"

From //src/graphics/lib/magma/gnbuild/magma.gni:20

max_blob_contents_size

Maximum allowable contents for the /blob in a release mode build. Zero means no limit. contents_size refers to contents stored within the filesystem (regardless of how they are stored).

Current value (from the default): "0"

From //build/images/filesystem_limits.gni:10

max_blob_image_size

Maximum allowable image_size for /blob in a release mode build. Zero means no limit. image_size refers to the total image size, including both contents and metadata.

Current value (from the default): "0"

From //build/images/filesystem_limits.gni:16

max_data_contents_size

Maximum allowable contents_size for /data in a release mode build. Zero means no limit. contents_size refers to contents stored within the filesystem (regardless of how they are stored).

Current value (from the default): "0"

From //build/images/filesystem_limits.gni:22

max_data_image_size

Maximum allowable image_size for /data in a release mode build. Zero means no limit. image_size refers to the total image size, including both contents and metadata.

Current value (from the default): "0"

From //build/images/filesystem_limits.gni:28

max_fuchsia_zbi_size

Maximum allowable size for fuchsia.zbi

Current value for target_cpu = "arm64": "16777216"

From //boards/arm64.gni:36

Overridden from the default: "0"

From //build/images/filesystem_limits.gni:31

Current value for target_cpu = "x64": "16777216"

From //boards/common/x64-common.gni:76

Overridden from the default: "0"

From //build/images/filesystem_limits.gni:31

max_fvm_size

Maximum allowable size for the FVM in a release mode build Zero means no limit

Current value (from the default): "0"

From //build/images/max_fvm_size.gni:8

max_log_disk_usage

Controls how many bytes of space on disk are used to persist device logs. Should be a string value that only contains digits.

Current value (from the default): "0"

From //garnet/bin/log_listener/BUILD.gn:12

max_zedboot_zbi_size

Maximum allowable size for zedboot.zbi

Current value for target_cpu = "arm64": "16777216"

From //boards/arm64.gni:37

Overridden from the default: "0"

From //build/images/filesystem_limits.gni:34

Current value for target_cpu = "x64": "16777216"

From //boards/common/x64-common.gni:77

Overridden from the default: "0"

From //build/images/filesystem_limits.gni:34

mbedtls_config_file

Configuration file for MbedTLS.

Current value (from the default): "mbedtls-config.h"

From //third_party/openthread/third_party/mbedtls/BUILD.gn:30

meta_package_labels

A list of labels for meta packages to be included in the monolith.

Current value for target_cpu = "arm64": []

From //products/bringup.gni:49

Overridden from the default: []

From //build/images/args.gni:69

Current value for target_cpu = "x64": []

From //products/bringup.gni:49

Overridden from the default: []

From //build/images/args.gni:69

minfs_board_maximum_bytes

Current value (from the default): false

From //build/images/fvm.gni:103

minfs_board_minimum_data_bytes

Current value (from the default): false

From //build/images/fvm.gni:90

minfs_board_minimum_inodes

Current value (from the default): false

From //build/images/fvm.gni:80

minfs_enable_dirty_cache

Set this to true when configuring gn args to enable minfs dirty cache. This is a compile time argument instead of mount time argument because we conditionally want to enable dirty cache only on specific configurations. Once it is enabled, we want the board to run all instances of minfs, including # data and all minfs created to run test, should enable dirty cache. This ensures that we run what we test.

Current value (from the default): false

From //src/storage/minfs/BUILD.gn:12

minfs_maximum_runtime_bytes

minfs_maximum_runtime_bytes is an upper bound on the partition size on the device. Partitions can grow as needed if there are extra slices available in FVM. This limit prevents the minfs partition from taking too much space away from other uses.

Pass the empty string for no limit.

Current value (from the default): ""

From //src/storage/fshost/BUILD.gn:23

minfs_product_maximum_bytes

Current value (from the default): false

From //build/images/fvm.gni:104

minfs_product_minimum_data_bytes

Current value (from the default): false

From //build/images/fvm.gni:91

minfs_product_minimum_inodes

Current value (from the default): false

From //build/images/fvm.gni:81

mini_chromium_is_chromeos_ash

Current value (from the default): false

From //third_party/crashpad/third_party/mini_chromium/mini_chromium/build/platform.gni:31

mini_chromium_is_chromeos_lacros

Current value (from the default): false

From //third_party/crashpad/third_party/mini_chromium/mini_chromium/build/platform.gni:30

msd_arm_enable_all_cores

Enable all 8 cores, which is faster but emits more heat.

Current value (from the default): true

From //src/graphics/drivers/msd-arm-mali/src/BUILD.gn:9

msd_arm_enable_cache_coherency

With this flag set the system tries to use cache coherent memory if the GPU supports it.

Current value (from the default): true

From //src/graphics/drivers/msd-arm-mali/src/BUILD.gn:13

msd_arm_enable_protected_debug_swap_mode

In protected mode, faults don‘t return as much information so they’re much harder to debug. To work around that, add a mode where protected atoms are executed in non-protected mode and vice-versa.

NOTE: The memory security ranges should also be set (in TrustZone) to the opposite of normal, so that non-protected mode accesses can only access protected memory and vice versa. Also, growable memory faults won't work in this mode, so larger portions of growable memory should precommitted (which is not done by default).

Current value (from the default): false

From //src/graphics/drivers/msd-arm-mali/src/BUILD.gn:23

msd_build_root

Current value (from the default): "//src/graphics/drivers"

From //src/graphics/lib/magma/gnbuild/magma.gni:15

msd_intel_gen_build_root

Current value (from the default): "//src/graphics/drivers/msd-intel-gen"

From //src/graphics/lib/magma/gnbuild/magma.gni:16

netcfg_autostart

Current value (from the default): true

From //src/connectivity/management/BUILD.gn:6

netsvc_extra_defines

Current value (from the default): []

From //src/bringup/bin/netsvc/BUILD.gn:22

omaha_app_id

Default app id will always return no update.

Current value (from the default): "fuchsia-test:no-update"

From //src/sys/pkg/bin/omaha-client/BUILD.gn:13

openthread_config_assert_enable

Enable assertions.

Current value (from the default): true

From //third_party/openthread/etc/gn/openthread.gni:79

openthread_config_backbone_router_enable

Enable backbone router functionality

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:82

openthread_config_border_agent_enable

Enable border agent support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:85

openthread_config_border_router_enable

Enable border router support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:88

openthread_config_border_routing_enable

Enable border routing support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:91

openthread_config_channel_manager_enable

Enable channel manager support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:94

openthread_config_channel_monitor_enable

Enable channel monitor support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:97

openthread_config_child_supervision_enable

Enable child supervision support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:100

openthread_config_coap_api_enable

Enable coap api support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:103

openthread_config_coap_observe_api_enable

Enable coap observe (RFC7641) api support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:109

openthread_config_coap_secure_api_enable

Enable secure coap api support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:106

openthread_config_commissioner_enable

Enable commissioner support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:112

openthread_config_deps

Extra deps for OpenThread configuration.

Current value (from the default): []

From //third_party/openthread/etc/gn/openthread.gni:38

openthread_config_dhcp6_client_enable

Enable DHCP6 client support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:118

openthread_config_dhcp6_server_enable

Enable DHCP6 server support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:121

openthread_config_diag_enable

Enable diagnostic support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:124

openthread_config_dns_client_enable

Enable DNS client support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:127

openthread_config_dnssd_server_enable

Enable DNS-SD server support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:130

openthread_config_dua_enable

Enable Domain Unicast Address feature for Thread 1.2

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:136

openthread_config_ecdsa_enable

Enable ECDSA support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:133

openthread_config_enable_builtin_mbedtls_management

Current value (from the default): true

From //third_party/openthread/etc/gn/openthread.gni:230

openthread_config_file

OpenThread config header.

Current value (from the default): "<openthread-config-fuchsia.h>"

From //third_party/openthread/etc/gn/openthread.gni:35

openthread_config_full_logs

Enable full logs

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:217

openthread_config_heap_external_enable

Enable external heap support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:142

openthread_config_ip6_fragmentation_enable

Enable ipv6 fragmentation support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:145

openthread_config_ip6_slaac_enable

Enable support for adding of auto-configured SLAAC addresses by OpenThread

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:196

openthread_config_jam_detection_enable

Enable jam detection support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:148

openthread_config_joiner_enable

Enable joiner support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:151

openthread_config_legacy_enable

Enable legacy network support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:154

openthread_config_link_metrics_enable

Enable link metrics

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:157

openthread_config_link_raw_enable

Enable link raw service

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:160

openthread_config_log_level_dynamic_enable

Enable dynamic log level control

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:163

openthread_config_log_output

Log output: none, debug_uart, app, platform

Current value (from the default): ""

From //third_party/openthread/etc/gn/openthread.gni:76

openthread_config_mac_csl_receiver_enable

Enable csl receiver

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:115

openthread_config_mac_filter_enable

Enable mac filter support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:166

openthread_config_message_use_heap

Enable use built-in heap for message buffers

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:169

openthread_config_mle_long_routes_enable

Enable MLE long routes extension (experimental, breaks Thread conformance]

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:172

openthread_config_mlr_enable

Enable Multicast Listener Registration feature for Thread 1.2

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:139

openthread_config_multiple_instance_enable

Enable multiple instances

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:178

openthread_config_ncp_hdlc_enable

Enable NCP HDLC support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:226

openthread_config_ncp_spi_enable

Enable NCP SPI support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:223

openthread_config_otns_enable

Enable OTNS support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:220

openthread_config_ping_sender

Enable ping sender support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:208

openthread_config_platform_netif_enable

Enable platform netif support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:181

openthread_config_platform_udp_enable

Enable platform UDP support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:184

openthread_config_reference_device_enable

Enable Thread Test Harness reference device support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:187

openthread_config_sntp_client_enable

Enable SNTP Client support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:199

openthread_config_srp_client_enable

Enable SRP Client support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:202

openthread_config_srp_server_enable

Enable SRP Server support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:205

openthread_config_thread_version

Thread version: 1.1, 1.2

Current value (from the default): "1.1"

From //third_party/openthread/etc/gn/openthread.gni:73

openthread_config_time_sync_enable

Enable the time synchronization service feature

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:211

openthread_config_tmf_netdata_service_enable

Enable support for injecting Service entries into the Thread Network Data

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:190

openthread_config_tmf_network_diag_mtd_enable

Enable TMF network diagnostics on MTDs

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:175

openthread_config_udp_forward_enable

Enable UDP forward support

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:214

openthread_core_config_deps

Extra deps for OpenThread core configuration.

Current value (from the default): []

From //third_party/openthread/etc/gn/openthread.gni:50

openthread_core_config_platform_check_file

OpenThread platform-specific config check header

Current value (from the default): ""

From //third_party/openthread/etc/gn/openthread.gni:47

openthread_enable_core_config_args

Configure OpenThread via GN arguments.

Current value (from the default): true

From //third_party/openthread/etc/gn/openthread.gni:67

openthread_external_mbedtls

Use external mbedtls. If blank, internal mbedtls will be used.

Current value (from the default): ""

From //third_party/openthread/etc/gn/openthread.gni:56

openthread_external_platform

Use external platform.

Current value (from the default): ""

From //third_party/openthread/etc/gn/openthread.gni:53

openthread_package_name

Package name for OpenThread.

Current value (from the default): "OPENTHREAD"

From //third_party/openthread/etc/gn/openthread.gni:59

openthread_package_version

Package version for OpenThread.

Current value (from the default): "1.0.0"

From //third_party/openthread/etc/gn/openthread.gni:62

openthread_project_core_config_file

OpenThread project-specific core config header

Current value (from the default): ""

From //third_party/openthread/etc/gn/openthread.gni:44

openthread_project_include_dirs

Include directories for project specific configs.

Current value (from the default): []

From //third_party/openthread/etc/gn/openthread.gni:41

openthread_settings_ram

Enable volatile-only storage of settings

Current value (from the default): false

From //third_party/openthread/etc/gn/openthread.gni:193

optimize

  • none: really unoptimized, usually only build-tested and not run
  • debug: “optimized for debugging”, light enough to avoid confusion
  • default: default optimization level
  • size: optimized for space rather than purely for speed
  • speed: optimized purely for speed
  • sanitizer: optimized for sanitizers (ASan, etc.)
  • profile: optimized for coverage/profile data collection
  • coverage: optimized for coverage data collection

Current value (from the default): "speed"

From //build/config/compiler.gni:23

output_breakpad_syms

Sets if we should output breakpad symbols for Fuchsia binaries.

Current value (from the default): false

From //build/config/BUILDCONFIG.gn:30

output_gsym

Controls whether we should output GSYM files for Fuchsia binaries.

Current value (from the default): false

From //build/config/BUILDCONFIG.gn:33

package_flavor_selections

Used to configure the set of package flavors desired.

Usage:

package_flavor_selections = [ { name = “snazzy” flavor = “with_hooks” }, { name = “some_other_package” flavor = “some_other_flavor” }, ]

The above specifies that the package “snazzy” should use the “with_hooks” flavor, and that “some_other_package” should use the “some_other_flavor” flavor instead of their default flavor all other packages using this template would use their default package flavors.

Current value for target_cpu = "arm64": []

From //products/bringup.gni:69

Overridden from the default: []

From //build/packages/prebuilt_package_with_flavors.gni:29

Current value for target_cpu = "x64": []

From //products/bringup.gni:69

Overridden from the default: []

From //build/packages/prebuilt_package_with_flavors.gni:29

persist_logs

Current value (from the default): false

From //build/persist_logs.gni:13

platform_enable_user_pci

Current value (from the default): false

From //src/devices/bus/drivers/pci/pci.gni:10

pmm_checker_from_board

Used to control whether board definitions include PMM checker options.

Current value (from the default): true

From //boards/kernel_cmdline/BUILD.gn:34

pre_erase_flash

Current value (from the default): false

From //build/images/args.gni:89

prebuilt_dart_sdk

Directory containing prebuilt Dart SDK. This must have in its bin/ subdirectory gen_snapshot.OS-CPU binaries.

Current value (from the default): "//prebuilt/third_party/dart/linux-x64"

From //build/dart/dart.gni:8

prebuilt_libvulkan_img_path

The path to a prebuilt libvulkan.so for an IMG GPU.

Current value (from the default): ""

From //src/graphics/lib/magma/gnbuild/magma.gni:30

product_bootfs_labels

A list of binary labels to include in ZBIs built for this product.

Current value for target_cpu = "arm64": ["//build/info:bootfs", "//bundles:bootstrap", "//bundles:debugging", "//bundles:diagnostics-eng", "//bundles/bringup:manual_testing", "//bundles/drivers:bootstrap", "//bundles/drivers:bootstrap-eng", "//bundles/drivers:usb-host-stack", "//bundles/drivers:usb-peripheral-stack", "//bundles/drivers:utils", "//src/diagnostics/archivist:default-service-config", "//products/kernel_cmdline:blobfs.cache-eviction-policy--NEVER_EVICT", "//products/kernel_cmdline:console.shell--true", "//products/kernel_cmdline:devmgr.log-to-debuglog--true", "//products/kernel_cmdline:kernel.enable-debugging-syscalls--true", "//products/kernel_cmdline:kernel.enable-serial-syscalls--true", "//products/kernel_cmdline:kernel.oom.behavior--jobkill", "//products/kernel_cmdline:netsvc.all-features--true", "//products/kernel_cmdline:netsvc.disable--false", "//src/testing/runtests", "//src/sys/component_manager:component_manager_bootfs_config", "//build/images:component_id_index_config"]

From //products/bringup.gni:41

Overridden from the default: []

From //build/product.gni:7

Current value for target_cpu = "x64": ["//build/info:bootfs", "//bundles:bootstrap", "//bundles:debugging", "//bundles:diagnostics-eng", "//bundles/bringup:manual_testing", "//bundles/drivers:bootstrap", "//bundles/drivers:bootstrap-eng", "//bundles/drivers:usb-host-stack", "//bundles/drivers:usb-peripheral-stack", "//bundles/drivers:utils", "//src/diagnostics/archivist:default-service-config", "//products/kernel_cmdline:blobfs.cache-eviction-policy--NEVER_EVICT", "//products/kernel_cmdline:console.shell--true", "//products/kernel_cmdline:devmgr.log-to-debuglog--true", "//products/kernel_cmdline:kernel.enable-debugging-syscalls--true", "//products/kernel_cmdline:kernel.enable-serial-syscalls--true", "//products/kernel_cmdline:kernel.oom.behavior--jobkill", "//products/kernel_cmdline:netsvc.all-features--true", "//products/kernel_cmdline:netsvc.disable--false", "//src/testing/runtests", "//src/sys/component_manager:component_manager_bootfs_config", "//build/images:component_id_index_config"]

From //products/bringup.gni:41

Overridden from the default: []

From //build/product.gni:7

product_include_updates_in_blobfs

Include update package in blob.blk. Some products may not need the update package included as part of the blobfs. TODO(fxbug.dev/58645) Remove when no longer needed.

Current value (from the default): true

From //build/product.gni:15

product_system_image_deps

A list of binary labels to include in the system_image package.

Current value (from the default): []

From //build/product.gni:10

prototype_account_transfer

Whether or not prototype account transfer is enabled. NOTE: This is not secure and should NOT be enabled for any products! This is only for use during local development.

Current value (from the default): false

From //src/identity/bin/account_manager/BUILD.gn:12

recovery_label

Allows a product to specify the recovery image used in the zirconr slot. Default recovery image is zedboot. Overriding this value will keep zedboot in the build but will not include it as the default zirconr image. Recovery images can provide an update target by specifying the metadata item “update_target” in the format =. (Such as update_target = [ "recovery=" + rebase_path(recovery_path, root_build_dir) ]) Example value: “//build/images/recovery”

Current value (from the default): "//build/images/zedboot"

From //build/images/args.gni:126

recovery_logo_path

Path to file to use for recovery logo

Current value (from the default): "//src/recovery/system/res/fuchsia-logo.shed"

From //src/recovery/system/system_recovery_args.gni:7

recovery_only

This is really a build for a recovery image, and so the fuchsia image that is being built isn‘t properly configured, and so just disable the new image assembly work until that’s been addressed.

Current value (from the default): false

From //build/images/args.gni:19

recovery_static_pkgs_goldens

An optional list of golden files for recovery.zbi static pkgs list. If specified, they would be compared against recovery.zbi static pkgs list during build time. At least one of the golden files must match. In normal case, there should only be golden file in this list. During a soft transition where changes are made in a different repo than the golden file repo, user need to

  1. copy the old golden file before the change to ‘*.orig’
  2. create a new golden file reflecting the changes
  3. add both the old golden file and new golden file to this list. e.g. there would be ‘product.txt’ and ‘product.txt.orig’ in this list and check in the above changes.
  4. check in the changes that is made in a different repo.
  5. delete ‘product.txt.orig’ and remove it from this list.

Current value (from the default): []

From //build/security.gni:96

recovery_zbi_bootfs_filelist_goldens

An optional list of golden files for recovery.zbi bootFS file list. If specified, they would be compared against recovery.zbi bootFS file list during build time. At least one of the golden files must match. In normal case, there should only be golden file in this list. During a soft transition where changes are made in a different repo than the golden file repo, user need to

  1. copy the old golden file before the change to ‘*.orig’
  2. create a new golden file reflecting the changes
  3. add both the old golden file and new golden file to this list. e.g. there would be ‘product.txt’ and ‘product.txt.orig’ in this list and check in the above changes.
  4. check in the changes that is made in a different repo.
  5. delete ‘product.txt.orig’ and remove it from this list.

Current value (from the default): []

From //build/security.gni:66

recovery_zbi_kernel_cmdline_goldens

An optional list of golden files for recovery.zbi kernel cmdline args. If specified, they would be compared against recovery.zbi kernel cmdline during build time. At least one of the golden files must match. In normal case, there should only be one golden file in this list. During a soft transition where changes are made in a different repo than the golden file repo, user need to

  1. copy the old golden file before the change to ‘*.orig’
  2. create a new golden file reflecting the changes
  3. add both the old golden file and new golden file to this list. e.g. there would be ‘product.txt’ and ‘product.txt.orig’ in this list and check in the above changes.
  4. check in the changes that is made in a different repo.
  5. delete ‘product.txt.orig’ and remove it from this list.

Current value (from the default): []

From //build/security.gni:36

run_slow_bssl_tests

Current value (from the default): false

From //third_party/boringssl/BUILD.gn:14

rust_cap_lints

Sets the maximum lint level. “deny” will make all warnings into errors, “warn” preserves them as warnings, and “allow” will ignore warnings.

Current value (from the default): "deny"

From //build/rust/config.gni:53

rust_incremental

Enable incremental rust compilation. Takes a path to the directory to use as the cache.

Current value (from the default): ""

From //build/config/rust/BUILD.gn:17

rust_lto

Sets the default LTO type for rustc bulids.

Current value (from the default): ""

From //build/rust/config.gni:45

rust_override_lto

Overrides the LTO setting for all Rust builds, regardless of debug/release flags. Valid values are “none”, “thin”, and “fat”.

Current value (from the default): ""

From //build/rust/config.gni:63

rust_override_opt

Overrides the optimization level for all Rust builds, regardless of debug/release flags or the force_opt arg to the rustc_ templates. Valid values are 0-3, o, and z.

Current value (from the default): ""

From //build/rust/config.gni:58

rust_sysroot

Sets a custom base directory for where rust tooling looks for the standard library

Current value (from the default): "../../prebuilt/third_party/rust/linux-x64"

From //build/rust/config.gni:42

rust_toolchain_triple_suffix

Sets the fuchsia toolchain target triple suffix (after arch)

Current value (from the default): "fuchsia"

From //build/rust/config.gni:48

rust_v0_symbol_mangling

Controls whether the rust compiler uses v0 symbol mangling scheme (see https://github.com/rust-lang/rfcs/blob/HEAD/text/2603-rust-symbol-name-mangling-v0.md). The v0 symbol mangling scheme requires upstream LLVM support when demangling, so it is not on by default. TODO(fxbug.dev/57302): Enable v0 mangling by default.

Current value (from the default): false

From //build/config/rust/BUILD.gn:13

rustc_lib_dir

Path to rustc lib directory.

Current value (from the default): "../../prebuilt/third_party/rust/linux-x64/lib"

From //build/images/manifest.gni:16

rustc_prefix

Sets a custom base directory for rustc and cargo. This can be used to test custom Rust toolchains.

Current value (from the default): "../../prebuilt/third_party/rust/linux-x64/bin"

From //build/rust/config.gni:24

rustc_version_description

Human-readable identifier for the toolchain version.

TODO(tmandry): Make this the same repo/revision info from rustc --version. e.g., clang_version_description = read_file(“$_rustc_lib_dir/VERSION”)

Current value (from the default): ""

From //build/rust/config.gni:38

rustc_version_string

This is a string identifying the particular toolchain version in use. Its only purpose is to be unique enough that it changes when switching to a new toolchain, so that recompilations with the new compiler can be triggered.

When using the prebuilt, this is ignored and the CIPD instance ID of the prebuilt is used.

Current value (from the default): "RGvNx_-InWScNjD6DO2FtsYXe_uu4Qp278-3OCx2TwkC"

From //build/rust/config.gni:32

scenic_display_frame_number

Draws the current frame number in the top-left corner.

Current value (from the default): false

From //src/ui/scenic/lib/gfx/BUILD.gn:12

scenic_enable_vulkan_validation

Include the vulkan validation layers in scenic.

Current value (from the default): false

From //src/ui/scenic/lib/gfx/build_args.gni:7

scenic_ignore_vsync

Current value (from the default): false

From //src/ui/scenic/lib/gfx/BUILD.gn:9

scheduler_queue_tracing_enabled

Enables scheduler queue tracing for trace-based scheduler performance analysis.

Current value (from the default): false

From //zircon/kernel/params.gni:48

scheduler_tracing_level

The level of detail for scheduler traces when enabled. Values greater than zero add increasing details at the cost of increased trace buffer use.

0 = Default kernel:sched tracing. 1 = Adds duration traces for key scheduler operations. 2 = Adds flow events from wakeup to running state. 3 = Adds detailed internal durations and probes.

Current value (from the default): 0

From //zircon/kernel/params.gni:44

scudo_default_options

Default Scudo options (before the SCUDO_OPTIONS environment variable is read at runtime). Scudo is the memory allocator in Fuchsia's C library, so this affects all Fuchsia programs. This can be a list of strings or a single string.

This operates similarly to asan_default_options and its cousins for other sanitizers, but is slightly different. If this variable is empty, then no __scudo_default_options function is injected into programs at all. Individual targets can use dependencies on sanitizer_extra_options() targets to cause options to be injected, and that will be compatible with any build-wide settings of scudo_default_options. Programs can define their own __scudo_default_options functions, but doing so will break all builds with this variable is set to nonempty, so any program in the build that needs such a setting (which should be only in tests) can use the sanitizer_extra_options() mechanism instead.

Current value (from the default): []

From //build/config/sanitizers/sanitizer_default_options.gni:67

sdk_dirs

The directories to search for parts of the SDK.

By default, we search the public directories for the various layers. In the future, we'll search a pre-built SDK as well.

Current value (from the default): ["//garnet/public", "//topaz/public"]

From //build/config/fuchsia/sdk.gni:10

sdk_id

Identifier for the Core SDK.

Current value (from the default): ""

From //sdk/config.gni:7

select_variant

List of “selectors” to request variant builds of certain targets. Each selector specifies matching criteria and a chosen variant. The first selector in the list to match a given target determines which variant is used for that target.

Each selector is either a string or a scope. A shortcut selector is a string; it gets expanded to a full selector. A full selector is a scope, described below.

A string selector can match a name in select_variant_shortcuts. If it‘s not a specific shortcut listed there, then it can be the name of any variant described in known_variants and universal_variants (and combinations thereof). A selector that’s a simple variant name selects for every binary built in the target toolchain: { host=false variant=selector }.

If a string selector contains a slash, then it‘s "shortcut/filename" and selects only the binary in the target toolchain whose output_name matches "filename", i.e. it adds output_name=["filename"] to each selector scope that the shortcut’s name alone would yield.

The scope that forms a full selector defines some of these:

variant (required)
    [string or `false`] The variant that applies if this selector
    matches.  This can be `false` to choose no variant, or a string
    that names the variant.  See
    [`known_variants`](#known_variants) and
    [`universal_variants`](#universal_variants).

The rest below are matching criteria. All are optional. The selector matches if and only if all of its criteria match. If none of these is defined, then the selector always matches.

The first selector in the list to match wins and then the rest of the list is ignored. To construct more complex rules, use a blocklist selector with variant=false before a catch-all default variant, or a list of specific variants before a catch-all false variant.

Each “[strings]” criterion is a list of strings, and the criterion is satisfied if any of the strings matches against the candidate string.

host
    [boolean] If true, the selector matches in the host toolchain.
    If false, the selector matches in the target toolchain.

testonly
    [boolean] If true, the selector matches targets with testonly=true.
    If false, the selector matches in targets without testonly=true.

target_type
    [strings]: `"executable"`, `"loadable_module"`, or `"driver_module"`

output_name
    [strings]: target's `output_name` (default: its `target name`)

label
    [strings]: target's full label with `:` (without toolchain suffix)

name
    [strings]: target's simple name (label after last `/` or `:`)

dir
    [strings]: target's label directory (`//dir` for `//dir:name`).

Current value (from the default): []

From //build/config/BUILDCONFIG.gn:1586

select_variant_canonical

This should never be set as a build argument. It exists only to be set in toolchain_args. See //build/toolchain/clang_toolchain.gni for details.

Current value (from the default): []

From //build/config/BUILDCONFIG.gn:1591

select_variant_shortcuts

List of short names for commonly-used variant selectors. Normally this is not set as a build argument, but it serves to document the available set of short-cut names for variant selectors. Each element of this list is a scope where .name is the short name and .select_variant is a a list that can be spliced into select_variant.

Current value (from the default):

[{
  name = "host_asan"
  select_variant = [{
  host = true
  variant = "asan"
}]
}, {
  name = "host_asan-ubsan"
  select_variant = [{
  host = true
  variant = "asan-ubsan"
}]
}, {
  name = "host_coverage"
  select_variant = [{
  host = true
  variant = "coverage"
}]
}, {
  name = "host_coverage-rust"
  select_variant = [{
  host = true
  variant = "coverage-rust"
}]
}, {
  name = "host_profile"
  select_variant = [{
  host = true
  variant = "profile"
}]
}]

From //build/config/BUILDCONFIG.gn:1399

size_checker_input

The input to the size checker. The build system will produce a JSON file to be consumed by the size checker, which will check and prevent integration of subsystems that are over their space allocation. The input consists of the following keys:

asset_ext(string array): a list of extensions that should be considered as assets.

asset_limit(number): maximum size (in bytes) allocated for the assets.

core_limit(number): maximum size (in bytes) allocated for the core system and/or services. This is sort of a “catch all” component that consists of all the area / packages that weren't specified in the components list below.

components(object array): a list of component objects. Each object should contain the following keys:

component(string): name of the component.

src(string array): path of the area / package to be included as part of the component. The path should be relative to the obj/ in the output directory. For example, consider two packages foo and far, built to out/.../obj/some_big_component/foo and out/.../obj/some_big_component/bar. If you want to impose a limit on foo, your src will be [“some_big_component/foo”]. If you want to impose a limit on both foo and far, your src will be [“some_big_component”]. If a package has config-data, those prebuilt blobs actually live under the config-data package. If you wish to impose a limit of those data as well, you should add “build/images/config-data/$for_pkg” to your src. The $for_pkg corresponds to the $for_pkg field in config.gni.

limit(number): maximum size (in bytes) allocated for the component.

Example: size_checker_input = { asset_ext = [ “.ttf” ] asset_limit = 10240 core_limit = 10240 components = [ { component = “Foo” src = [ “topaz/runtime/foo_runner” ] limit = 10240 }, { component = “Bar” src = [ “build/images” ] limit = 20480 }, ] }

Current value (from the default): { }

From //tools/size_checker/cmd/BUILD.gn:52

smp_max_cpus

Current value (from the default): 16

From //zircon/kernel/params.gni:21

spinel_platform_header

Platform portability header for spinel.

Current value (from the default): "\"spinel_platform.h\""

From //third_party/openthread/src/lib/spinel/BUILD.gn:32

starnix_syscalls_test_label

Current value (from the default): "//prebuilt/starnix/tests/syscalls/linux-amd64/syscalls"

From //src/proc/tests/android/BUILD.gn:12

start_oobe

Whether or not to launch OOBE workflow on startup.

Current value (from the default): false

From //src/experiences/session_shells/ermine/shell/BUILD.gn:15

sysmgr_golden_warn_override

Used by config_package(). If true, then overrides the value of the sysmgr_golden_warn template parameter to true regardless of whether it is specified on a target.

Current value (from the default): false

From //build/config.gni:13

target_cpu

Current value for target_cpu = "arm64": "arm64"

From //out/not-default/args.gn:6

Overridden from the default: ""

Current value for target_cpu = "x64": "x64"

From //out/not-default/args.gn:6

Overridden from the default: ""

target_os

Current value (from the default): ""

target_sysroot

The absolute path of the sysroot that is used with the target toolchain.

Current value (from the default): ""

From //build/config/sysroot.gni:7

termina_disk

The termina disk image.

Defaults to the disk image from CIPD, but can be overridden to use a custom disk for development purposes.

Current value (from the default): "//prebuilt/virtualization/packages/termina_guest/images/arm64/vm_rootfs.img"

From //src/virtualization/packages/termina_guest/BUILD.gn:18

termina_kernel

The termina kernel image.

Defaults to the common linux kernel image from CIPD, but can be overridden to use a custom kernel for development purposes.

Current value (from the default): "//prebuilt/virtualization/packages/linux_guest/images/arm64/Image"

From //src/virtualization/packages/termina_guest/BUILD.gn:12

termina_tools

The termina tools disk image.

Defaults to the disk image from CIPD, but can be overridden to use a custom disk for development purposes.

Current value (from the default): "//prebuilt/virtualization/packages/termina_guest/images/arm64/vm_tools.img"

From //src/virtualization/packages/termina_guest/BUILD.gn:24

test_durations_file

A file in containing historical test duration data for this build configuration, used used by testsharder to evenly split tests across shards. It should be set for any builds where testsharder will be run afterwards.

Current value (from the default): ""

From //BUILD.gn:45

testonly_in_containers

Whether to allow testonly=true targets in fuchsia ZBI or base/cache packages.

Possible values are “all”: Allow testonly=true target in fuchsia ZBI and base/cache packages. “all_but_base_cache_packages”: Do not allow testonly=true target in base/cache packages, but allow in other fuchsia ZBI dependencies. “none”: Do not allow testonly=true target in all ZBI dependencies including base/cache packages.

Default value is ‘all’, it is preferable to set to ‘none’ for production image to avoid accidental inclusion of testing targets.

Current value (from the default): "all"

From //build/security.gni:109

thinlto_cache_dir

ThinLTO cache directory path.

Current value (from the default): "dartlang/thinlto-cache"

From //build/config/lto/config.gni:16

thinlto_jobs

Number of parallel ThinLTO jobs.

Current value (from the default): 8

From //build/config/lto/config.gni:13

time_trace

Whether to export time traces when building with clang. https://releases.llvm.org/9.0.0/tools/clang/docs/ReleaseNotes.html#new-compiler-flags

Current value (from the default): false

From //build/config/clang/time_trace.gni:8

toolchain_variant

This should never be set as a build argument. It exists only to be set in toolchain_args. See //build/toolchain/clang_toolchain.gni for details. This variable is a scope giving details about the current toolchain: toolchain_variant.base [label] The “base” toolchain for this variant, often the right thing to use in comparisons, not current_toolchain. This is the toolchain actually referenced directly in GN source code. If the current toolchain is not shlib_toolchain or a variant toolchain, this is the same as current_toolchain. In one of those derivative toolchains, this is the toolchain the GN code probably thought it was in. This is the right thing to use in a test like toolchain_variant.base == target_toolchain, rather rather than comparing against current_toolchain. toolchain_variant.name [string] The name of this variant, as used in variant fields in select_variant clauses. In the base toolchain and its shlib_toolchain, this is "". toolchain_variant.suffix [string] This is “-${toolchain_variant.name}”, "" if name is empty. toolchain_variant.is_pic_default [bool] This is true in shlib_toolchain. toolchain_variant.tags [list of strings] A list of liberal strings, each one describing a property of this toolchain instance. See //build/toolchain/variant_tags.gni for more details. toolchain_variant.configs [list of configs] A list of configs that are added after the default ones to all linkable targets for this toolchain() instance. toolchain_variant.prefix_configs [list of configs] A list of configs that are added before the default ones to all linkable targets for this toolchain() instance. toolchain_variant.remove_common_configs [list of configs] A list of configs that are removed from all linkable targets for this toolchain() instance. Useful when one of the default configs must not be used. toolchain_variant.remove_shared_configs [list of configs] Same a remove_common_configs, but only applies to non-executable (e.g. shared_library()) targets. toolchain_variant.instrumented [boolean] A convenience flag that is true iff “instrumented” is part of toolchain_variant.tags. toolchain_variant.with_shared [boolean] True iff this toolchain() instance has a secondary toolchain to build ELF shared-library code. toolchain_variant.libprefix [string] Installation prefix for instrumented shared libraries, or an empty string for non-instrumented ones. For full details, see comment below where toolchain_variant.libprefix is defined.

The other fields are the variant's effects as defined in known_variants.

Current value (from the default):

{
  base = "//build/toolchain/fuchsia:arm64"
}

From //build/config/BUILDCONFIG.gn:136

ubsan_default_options

Default UndefinedBehaviorSanitizer options (before the UBSAN_OPTIONS environment variable is read at runtime). This can be set as a build argument to affect most “ubsan” variants in $variants (which see), or overridden in $toolchain_args in one of those variants. This can be a list of strings or a single string.

Note that even if this is empty, programs in this build cannot define their own __ubsan_default_options C function. Instead, they can use a sanitizer_extra_options() target in their deps and then any options injected that way can override that option's setting in this list.

Current value (from the default): ["print_stacktrace=1", "halt_on_error=1"]

From //build/config/sanitizers/sanitizer_default_options.gni:47

universal_variants

Current value (from the default):

[{
  configs = []
  name = "debug"
  toolchain_args = {
  is_debug = true
}
}]

From //build/config/BUILDCONFIG.gn:1383

universe_package_labels

If you add package labels to this variable, the packages will be included in the ‘universe’ package set, which represents all software that is produced that is to be published to a package repository or to the SDK by the build. The build system ensures that the universe package set includes the base and cache package sets, which means you do not need to redundantly include those labels in this variable.

Current value for target_cpu = "arm64": ["//tools/net/device-finder:host", "//build/images:fastboot"]

From //out/not-default/args.gn:11

Overridden from the default: []

From //BUILD.gn:53

Current value for target_cpu = "x64": ["//tools/net/device-finder:host", "//build/images:fastboot"]

From //out/not-default/args.gn:11

Overridden from the default: []

From //BUILD.gn:53

unpack_debug_archives

To ensure that everything can be built without debug symbols present we gate weather or not these are consumed on a build argument. When set, unpack_debug_archives creates an additional build step that unpacks debug archives in tar.bzip2 format into the .build-id directory

Current value (from the default): false

From //build/packages/prebuilt_package.gni:13

update_kernels

(deprecated) List of kernel images to include in the update (OTA) package. If no list is provided, all built kernels are included. The names in the list are strings that must match the filename to be included in the update package.

Current value (from the default): []

From //build/images/args.gni:32

use_cast_runner_canary

If true then the most recent canary version of the Cast Runner is used, otherwise the most recently validated version is used.

Current value (from the default): false

From //src/chromium/build_args.gni:18

use_ccache

Set to true to enable compiling with ccache

Current value (from the default): false

From //build/toolchain/ccache.gni:9

use_chromium_canary

Set to use the most recent canary version of prebuilt Chromium components otherwise the most recently validated version is used.

Current value (from the default): false

From //src/chromium/build_args.gni:14

use_custom_gbm

Current value (from the default): false

From //src/graphics/lib/gbm/gbm.gni:6

use_cxx_relative_vtables

Controls if we enable relative-vtables for C++ targets. TODO(fxbug.dev/45314): Set this to true in a followup one-line CL.

Current value (from the default): true

From //build/config/clang/clang.gni:20

use_goma

Set to true to enable distributed compilation using Goma.

Current value for target_cpu = "arm64": false

From //out/not-default/args.gn:7

Overridden from the default: false

From //build/toolchain/goma.gni:11

Current value for target_cpu = "x64": false

From //out/not-default/args.gn:7

Overridden from the default: false

From //build/toolchain/goma.gni:11

use_legacy_virtcon

Set to use legacy virtcon implementation.

Current value (from the default): true

From //src/bringup/bundles/BUILD.gn:7

use_lto

Use link time optimization (LTO).

Current value (from the default): false

From //build/config/lto/config.gni:7

use_modern_input_injection

Set this to true when configuring gn args to use the modern input injection protocol fuchsia.input.injection.InputDeviceRegistry. If not set, input-synthesis defaults to connect to fuchsia.ui.input.InputDeviceRegistry.

Current value (from the default): false

From //src/lib/ui/input-synthesis/BUILD.gn:12

use_netstack3

If true, replaces netstack with netstack3.

When set as a GN argument, requires that sysmgr_config_warn_override be set to true to avoid build failures. See that flag's documentation for details.

Current value (from the default): false

From //src/connectivity/network/BUILD.gn:10

use_null_vulkan_on_host

TODO(liyl): Currently non-x64 platforms don't have Vulkan support, so we always use the null Vulkan implementation instead.

Global arguments for whether we use a “null” Vulkan implementation on host vulkan_executables and vulkan_tests, so that any attempt to create a VkInstances or VkDevice will fail.

This argument will affect all vulkan_{executable/test} build targets.

Current value (from the default): false

From //src/lib/vulkan/build/config.gni:40

use_physboot

TODO(fxbug.dev/32414): This is a temporary switch that will be removed. If true, use the new “physboot” booting path for the Zircon kernel.

Current value (from the default): false

From //zircon/kernel/BUILD.gn:21

use_prebuilt_ffmpeg

Use a prebuilt ffmpeg binary rather than building it locally. See //src/media/lib/ffmpeg/README.md for details. This is ignored when building in variant builds for which there is no prebuilt. In that case, ffmpeg is always built from source so as to be built with the selected variant‘s config. When this is false (either explicitly or in a variant build) then //third_party/ffmpeg must be in the source tree, which requires: jiri import -name third_party/ffmpeg -revision HEAD third_party/ffmpeg http://fuchsia.googlesource.com/integration or, if already importing a different manifest from there, resulting in errors from jiri update, it can work to just git clone (but jiri update won’t manage third_party/ffmpeg in this case): mkdir third_party/ffmpeg git clone “sso://fuchsia.googlesource.com/third_party/ffmpeg” third_party/ffmpeg

Current value (from the default): true

From //src/media/lib/ffmpeg/BUILD.gn:39

use_swiftshader_vulkan_icd_on_host

Global arguments for whether we use the SwiftShader Vulkan ICD on host vulkan_executables and vulkan_tests.

This argument will affect all vulkan_{executable/test} build targets and it only works when use_null_vulkan_on_host is set to false.

Current value (from the default): true

From //src/lib/vulkan/build/config.gni:49

use_thinlto

Use ThinLTO variant of LTO if use_lto = true.

Current value (from the default): true

From //build/config/lto/config.gni:10

use_vbmeta

If true, then a vbmeta image will be generated for provided ZBI and the paving script will pave vbmeta images to the target device.

Current value (from the default): false

From //build/images/vbmeta.gni:16

use_vboot

Use vboot images

Current value (from the default): false

From //build/images/args.gni:10

using_fuchsia_sdk

Only set in buildroots where targets configure themselves for use with the Fuchsia SDK

Current value (from the default): false

From //build/fuchsia/sdk.gni:8

vbmeta_a_partition

Current value (from the default): ""

From //build/images/args.gni:83

vbmeta_b_partition

Current value (from the default): ""

From //build/images/args.gni:84

vbmeta_r_partition

Current value (from the default): ""

From //build/images/args.gni:85

vendor_linting

Whether libraries under //vendor should be linted.

Current value (from the default): false

From //build/fidl/fidl_library.gni:13

virtcon_font_path

Current value (from the default): "//prebuilt/third_party/fonts/robotomono/RobotoMono-Regular.ttf"

From //src/bringup/bin/virtcon2/virtcon_args.gni:8

virtcon_logo_path

Path to file to use for logo

Current value (from the default): "//src/bringup/bin/virtcon2/data/fuchsia.riv"

From //src/bringup/bin/virtcon2/virtcon_args.gni:11

virtmagma_debug

Enable verbose logging in virtmagma-related code

Current value (from the default): false

From //src/graphics/lib/magma/include/virtio/virtmagma_debug.gni:7

vm_tracing_level

The level of detail for traces emitted by the VM system. Values greater than zero add increasing details at the cost of increased trace buffer use.

0 = Default kernel:* tracing. 1 = Adds flow events for asynchronous page requests.

Current value (from the default): 0

From //zircon/kernel/params.gni:63

vulkan_host_runtime_dir

|vulkan_host_runtime_dir| is the path to Vulkan runtime libraries, which contains prebuilt Vulkan loader, Vulkan layers, SwiftShader Vulkan ICD, and descriptor files required to load the libraries.

Current value (from the default): "//prebuilt/third_party/vulkan_runtime/linux-x64"

From //src/lib/vulkan/build/config.gni:23

vulkan_host_sdk_dir

|vulkan_host_sdk_dir| is the path to Vulkan SDK, which contains Vulkan headers and sources to Vulkan loader, layers and tools.

Current value (from the default): "//prebuilt/third_party/vulkansdk/linux/x86_64"

From //src/lib/vulkan/build/config.gni:16

vulkan_sdk

Current value (from the default): ""

From //src/graphics/examples/vkproto/common/common.gni:45

wait_queue_depth_tracing_enabled

Enables tracing of wait queue depths. Used for post-processing analysis of how deep wait queues tend to be under various loads, as well as how frequently the change depth.

Current value (from the default): false

From //zircon/kernel/params.gni:56

warn_on_sdk_changes

Whether to only warn when an SDK has been modified. If false, any unacknowledged SDK change will cause a build failure.

Current value (from the default): false

From //build/sdk/config.gni:11

weave_build_legacy_wdm

Tells openweave to support legacy WDM mode.

Current value (from the default): false

From //third_party/openweave-core/config.gni:29

weave_build_warm

Tells openweave to build WARM libraries.

Current value (from the default): true

From //third_party/openweave-core/config.gni:26

weave_system_config_use_sockets

Tells openweave components to use bsd-like sockets.

Current value (from the default): true

From //third_party/openweave-core/config.gni:7

weave_with_nlfaultinjection

Tells openweave components to support fault injection.

Current value (from the default): false

From //third_party/openweave-core/config.gni:20

weave_with_verhoeff

Tells openweave to support Verhoeff checksum.

Current value (from the default): true

From //third_party/openweave-core/config.gni:23

with_live_usb

Whether or not to include the live_usb component in the build.

Current value (from the default): false

From //src/sys/live_usb/BUILD.gn:15

wlancfg_config_type

Selects the wlan configuration type to use. Choices: “client” - client mode “ap” - access point mode "" (empty string) - no configuration

Current value (from the default): "client"

From //src/connectivity/wlan/wlancfg/BUILD.gn:16

zbi_compression

Compression setting for ZBI “storage” items. This can be “zstd”, optionally followed by “.LEVEL” where LEVEL can be an integer or “max”.

Current value (from the default): "zstd"

From //build/zbi/zbi.gni:12

zedboot_devmgr_config

List of arguments to populate /boot/config/devmgr in the Zedboot image.

Current value (from the default): []

From //build/images/zedboot/zedboot_args.gni:7

zircon_a_partition

Arguments to fx flash script (along with any firmware_prebuilts which specify a partition).

If fvm_partition is provided, the flash script will flash the full OS, recovery + Zircon + FVM + SSH keys. In this case, the bootloader must also support fastboot oem add-staged-bootloader-file ssh.authorized_keys.

Otherwise, the script will flash the recovery image to all slots, which doesn't require the FVM or SSH keys.

Current value (from the default): ""

From //build/images/args.gni:80

zircon_asserts

Current value (from the default): false

From //build/config/fuchsia/BUILD.gn:168

zircon_b_partition

Current value (from the default): ""

From //build/images/args.gni:81

zircon_build_root

Current value (from the default): "//zircon"

From //src/graphics/lib/magma/gnbuild/magma.gni:18

zircon_compdb_filter

Compilation database filter. Gets passed to --export-compile-commands=.

Current value (from the default): "default"

From //build/zircon/build_args.gni:16

zircon_kernel_disable_asserts

Forcibly disable all assertions for the Zircon kernel. If this is set, the default is to use the value of zx_assert_level to control assertions when building the kernel.

Current value (from the default): false

From //build/zircon/build_args.gni:9

zircon_optimize

Zircon optimization level. Same acceptable values as optimize. Note that this will be ignored, in favor of the global optimize variable if the latter is one of: “none”, “sanitizer”, “profile” or “size”.

Current value (from the default): "default"

From //build/config/zircon/levels.gni:18

zircon_r_partition

Current value (from the default): ""

From //build/images/args.gni:82

zircon_toolchain

This should never be set as a build argument. It exists only to be set in toolchain_args. For Zircon toolchains, this will be a scope whose schema is documented in //build/toolchain/zircon/zircon_toolchain.gni. For all other toolchains, this will be false.

This allows testing for a Zircon-specific toolchain with:

if (zircon_toolchain != false) { // code path for Zircon-specific toolchains } else { // code path for non-Zircon ones. }

Current value (from the default): false

From //build/config/BUILDCONFIG.gn:153

zircon_tracelog

Where to emit a tracelog from Zircon's GN run. No trace will be produced if given the empty string. Path can be source-absolute or system-absolute.

Current value (from the default): ""

From //build/zircon/build_args.gni:13

zvb_partition_name

Partition name from where image will be verified

Current value (from the default): "zircon"

From //build/images/vbmeta.gni:25

zx_assert_level

Controls which asserts are enabled.

ZX_ASSERT is always enabled.

  • 0 disables standard C assert() and ZX_DEBUG_ASSERT.
  • 1 disables ZX_DEBUG_ASSERT. Standard C assert() remains enabled.
  • 2 enables all asserts.

Current value (from the default): 2

From //build/config/zircon/levels.gni:13

target_cpu = "arm64"

amlogic_decoder_firmware_path

Path to the amlogic decoder firmware file. Overrides the default in the build.

Current value (from the default): ""

From //src/media/drivers/amlogic_decoder/BUILD.gn:12

arm_float_abi

The ARM floating point mode. This is either the string “hard”, “soft”, or “softfp”. An empty string means to use the default one for the arm_version.

Current value (from the default): ""

From //build/config/arm.gni:20

arm_optionally_use_neon

Whether to enable optional NEON code paths.

Current value (from the default): false

From //build/config/arm.gni:31

arm_tune

The ARM variant-specific tuning mode. This will be a string like “armv6” or “cortex-a15”. An empty string means to use the default for the arm_version.

Current value (from the default): ""

From //build/config/arm.gni:25

arm_use_neon

Whether to use the neon FPU instruction set or not.

Current value (from the default): true

From //build/config/arm.gni:28

arm_version

Current value (from the default): 8

From //build/config/arm.gni:12