// Copyright 2022 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
library fuchsia.hardware.audio.signalprocessing;

using zx;

const MAX_COUNT_DYNAMICS_BANDS uint32 = 64;

/// Level type.
type LevelType = strict enum : uint8 {
    /// Level Gain specified as peak.
    PEAK = 1;

    /// Level specified as RMS.
    RMS = 2;
};

/// Threshold type.
type ThresholdType = strict enum : uint8 {
    /// Apply dynamics processing above the threshold.
    ABOVE = 1;

    /// Apply dynamics processing below the threshold.
    BELOW = 2;
};

/// Parameters for a `Dynamics` element band.
type DynamicsBand = table {
    /// Unique ID for this band, only required to be unique within the corresponding
    /// `Element`, and valid until the channel associated with the `SignalProcessing`
    /// protocol is closed. Required.
    1: id uint64;
};

/// Supported controls for `Dynamics`.
/// If included, each bit representing a parameter of the dynamics processing bands can be changed
/// with `SetElement`.
type DynamicsSupportedControls = flexible bits : uint64 {
    /// If included, the `knee_width_db` parameter can be changed.
    KNEE_WIDTH = 0x1;

    /// If included, the `attack` parameter can be changed.
    ATTACK = 0x2;

    /// If included, the `release` parameter can be changed.
    RELEASE = 0x4;

    /// If included, the `output_gain_db` parameter can be changed.
    OUTPUT_GAIN = 0x8;

    /// If included, the `input_gain_db` parameter can be changed.
    INPUT_GAIN = 0x10;

    /// If included, the `lookahead` parameter can be changed.
    LOOKAHEAD = 0x20;

    /// If included, the `level_type` parameter can be changed.
    LEVEL_TYPE = 0x40;

    /// If included, the `linked_channels` parameter can be changed.
    LINKED_CHANNELS = 0x80;

    /// If included, the `threshold_type` parameter can be changed.
    THREDSHOLD_TYPE = 0x100;
};

/// Parameters for an `Element` with `type` equal to `DYNAMICS`.
type Dynamics = table {
    /// `Dynamics` elements in this protocol may support multiple bands, each
    /// specifying a number of parameters in `DynamicsElementState` that can be changed
    /// with `SetElement`.
    /// The number of elements of the `bands` vector determines the number of bands supported by
    /// this processing element.
    1: bands vector<DynamicsBand>:MAX_COUNT_DYNAMICS_BANDS;

    /// The controls supported by this processing element.
    2: supported_controls DynamicsSupportedControls;
};

/// State for a single band within an `Element` with `type` equal to `DYNAMICS`.
/// Servers may include control band fields even if the values are not able to be changed by the
/// client (i.e. the bits are not set in `supported_controls`).
type DynamicsBandState = table {
    /// Unique ID for the band. Must match one of the `id`s specified in
    /// `Dynamics` `bands`. Required.
    1: id uint64;

    /// Minimum frequency for the band in Hz. Required.
    /// This field could be 0, for instance for single band dynamics processing to specify
    /// (together with max_frequency) that the band is full range.
    2: min_frequency uint32;

    /// Maximum frequency for the band in Hz. Required.
    /// This field could be the Nyquist frequency, for instance for single band dynamics
    /// processing to specify (together with min_frequency) that the band is full range.
    3: max_frequency uint32;

    /// The value beyond which the dynamics main processing starts (subject to the
    /// `knee_width_db`), in input dB. Required.
    /// Some signal processing like `input_gain` and `output_gain` are not affected by this value.
    4: threshold_db float32;

    /// Dynamics processing is applied `ABOVE` or `BELOW` the threshold. Required for a server.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.THRESHOLD_TYPE` is not set in `supported_controls`.
    5: threshold_type ThresholdType;

    /// The input-to-output dB ratio above or below (see `threshold_type`) the knee region.
    /// Required.
    6: ratio float32;

    /// The width of the knee region, in input dB. Optional.
    /// If not included, the width of the knee region is unspecified.
    /// A value of zero is a "hard" knee; larger values lead to "softer" knees.
    /// This knee is centered on `threshold_db`.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.KNEE_WIDTH` is not set in `supported_controls`.
    7: knee_width_db float32;

    /// Attack time. Optional.
    /// If not included, the attack time is unspecified.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.ATTACK` is not set in `supported_controls`.
    8: attack zx.duration;

    /// Release time. Optional.
    /// If not included, the release time is unspecified.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.RELEASE` is not set in `supported_controls`.
    9: release zx.duration;

    /// Output (a.k.a. make up or post) gain value in dB. Optional.
    /// If not included, the output gain is unspecified.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.OUTPUT_GAIN` is not set in `supported_controls`.
   10: output_gain_db float32;

    /// input (a.k.a. pre) gain value in dB. Optional.
    /// If not included, the input gain is unspecified.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.INPUT_GAIN` is not set in `supported_controls`.
   11: input_gain_db float32;

    /// Level type (peak or RMS). Optional.
    /// If not included, the level type is unspecified.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.LEVEL_TYPE` is not set in `supported_controls`.
   12: level_type LevelType;

    /// Look-ahead time. Optional.
    /// If not included, the look-ahead time is unspecified.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.LOOKAHEAD` is not set in `supported_controls`.
   13: lookahead zx.duration;

    /// Linked channels (a.k.a. Stereo linked for 2-channel systems). Optional.
    /// If not included, the linked channels option is unspecified.
    /// If true, the dynamics response is applied to all channels.
    /// If false, each channel has its own dynamics response.
    /// A client must not include this field in a `SetElement` if
    /// `DynamicsSupportedControls.LINKED_CHANNELS` is not set in `supported_controls`.
   14: linked_channels bool;
};

/// State for an `Element` with `type` equal to `DYNAMICS`.
type DynamicsElementState = table {
    /// Each id must match an id from `Dynamics.bands` and ids cannot be repeated.
    /// `bands_state` must have at least one element.
    /// The bands controlled by `bands_state` are determined by each `band.id`.
    // Required.
    1: band_states vector<DynamicsBandState>:MAX_COUNT_DYNAMICS_BANDS;
};